Hi there.
I have a HTC SHIFT (x9500) with
ROM version = 1.0.7 ROMeO_S WWE
RADIO Version = 1.27.35.28
And i have a problem that bluetooth dosn´t work
Its like no bluetooth are installed in the phone
In COMM MANAGER theres only = Phone on/off - Flight mode - Active sync, but i can only choose phone on/off or flight mode.
Can i install a bluetooth (anything) and make it work ? (Just for bluetooth headset, and thats all)
Or is there a ROM with it all you can recommend ?
I only want to change the phone section --- The computersection is running fine with W7
Really hope someone can help me (and maybee give a link to "how to install it")
Thanks
Unfortunately bluetooth, wireless and SD card are not working on the Windows Mobile side of the Shift, only on the Vista side. And there is no publicly known cure for that. Sorry to disappoint you.
axelTP2 said:
Unfortunately bluetooth, wireless and SD card are not working on the Windows Mobile side of the Shift, only on the Vista side. And there is no publicly known cure for that. Sorry to disappoint you.
Click to expand...
Click to collapse
Thats ok.... I was just hoping that a bluetooth headset could solve my problem, here --->>>
My problem is that when i use headset (incl mic), no one can here me when i talk into the headset
When i disconnect the headset, the build in mic is working fine
I have tried with 3 headsets and the pin connection are ok, and the headsets working fine with other phones.
The problem is that when i connect a headset or headphones, the build in mic is disconnected.
If i try the headset(s) in the computersection, the mic is working fine.
And if i set the mic to (Listen to this), in the computersections soundoptions, i can here myself in the headset.
Maybe its the ROM to the phone theres no good ?
Cujox7500 said:
My problem is that when i use headset (incl mic), no one can here me when i talk into the headset.
When i disconnect the headset, the build in mic is working fine.
Maybe its the ROM to the phone theres no good ?
Click to expand...
Click to collapse
This is a known problem of the Shift, there is nothing wrong with your headset or your ROM version. Until somebody will find a cure for that (if ever....), you'll have to live with it.
axelTP2 said:
This is a known problem of the Shift, there is nothing wrong with your headset or your ROM version. Until somebody will find a cure for that (if ever....), you'll have to live with it.
Click to expand...
Click to collapse
Ok.... bad luck
But maybe you can help me how to setup MMS ?
I can sent and receive SMS, but i dont know how to set the phone up to sent and receive MMS´s
Cujox7500 said:
But maybe you can help me how to setup MMS ?
Click to expand...
Click to collapse
Hi Cujox7500!
Sorry, I only used my Shift as a phone for a couple of times out of curiosity.
To send MMS you should look for the settings your GSM operator is recommending, check on its website. Or maybe it could send the settings automatically via SMS.
bluetooth for htc x9500
Hello Guys
Nobody has yet solved for bloutooth in SnapVUE X9500?
Related
BA WM5 Broadcom 1.7.1 Build 3400 Stack (Test)
This is just some test of mine to hv option with BT stack (MS/Broadcom), I only spend the last 3 hour workin on this little project, so it really possible if anything is missing or I forgotin something (its happens to me right?..lol), but I've test it and it work like it should (With My v1.3 ROM), I dont know if this test hv a bug. maybe we can test it, especially A2DP and stabilty issues with this test.
Tested operation:
1. Activesync
2. Send/Recieve File
3. Headset via computer
4. Network Access
5. BT Serial Port
6. Dial-up Networking
Known Issue:
U tell me, not tested so much.
Instalation:
1. Install the HELMI_BA_WM5_BT1.7_TEST.CAB then soft reset
Uninstall (note the step its really neccesary, or u'll endup mess with ur phone):
1. Install Enable_MS_BT_.CAB
2. Delete registry value (or the folder)
[HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM]
and delete "Redirect" key on:
[HKEY_LOCAL_MACHINE\ControlPanel\Bluetooth]
"Redirect"="BTConnManagerCE.exe"
3. Reset
4. Uninstall HELMI_BA_WM5_BT1.7_TEST.
5. Delete file from \Temp dir
EDIT:
I forgot to mention, after u run ENABLE_MS_BT.CAB the Broadcomm/Widcomm file will be move to \Temp folder so u can delete it safely...
Dont expect to be perfect on this release, cos its only on earlier stage, to early, hopes someone might help for improvement, and workin together with me, and I hopes some1 can make a better Install/Uninstall process.
Dont install/try if u dont know what ur doin, and backup your data is a must.
Input is always welcome. cos I believe there's still much things to do.
Thanks for http://www.aximsite.com site and everybody there for the BT file.
http://www.aximsite.com/boards/showthread.php?t=122247
and also thanks -=xXx=- for the info where to find it. thanks man.
Helmi
gonna test it now helmi_c
thanks
Just intalled. The stereo works fine! Great quality for me! The hands free seems to be a bit tempremental. Worked once and then stopped afet receiving one call.. WIll try it out again..It looks like am stuck with an either. One observation: with the ms stack, there was a headphoen icon while using the phone. is absent here...wonder if that was a ms stack function?
deepak
helmi_c,
hmm weird, after i installed the new wildcom stack, my pda cant see my headset anymore.
still testing though.
wish me luck.
imatrix
I believe u guys both hv problem with MS Stack, hopes this stack will help for who having problem with MS Stack, but remember this is just some sort test, maybe still need a lot of improvement. but its seems work good with deepakr who hv problem with MS, imatrix hopes u'll hv the same result like he does. good luck.
btw In the rar there's a BTspeed cab, it might help for some headset, post on the Axim forum sites... there's also another app for controlin power if i'm not mistaken, I'll post when i get back.
A little note, this stack sometimes wakeup if gsm signal is lost/found, if the signal of gsm is good, it shouldnt happen (theoriticaly speaking..lol..).
helmi_c
Firstly great to see BT restarting automatically after handset is switched on from standby mode. After some fooling around I was able to set up activesync and it worked like a charm (useful for me especially since USB activesync does not work)
Couple of problems I faced
1. Turning off and restarting BT gave me a unable to load driver due to insufficient memory error. When I stopped my activesync, outlook and contacts and tried again it started successfully.
2. I was unable to find the DUN service and my PC did not recognize a DUN service either - am I looking/not looking at the right place?
Thanks and highly appreciate your prolific contribution
-AKC
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
hi..
hi have instal this, and find some issues
1- if i turn on bt the wifi dont work..
2- if i turn on wifi, the bt give the memory error
afther use 1 off the things (bt our wifi) need a soft reset to work the other
Riddler said:
bro helmi,
Sorry if i asking you stupid question.
Can this file install/working with WM2003SE ?
THX
Click to expand...
Click to collapse
No, it does not work on WM2003SE, I installed it and I had to hard re-set my Imate, it works only under Wondows 2005!!
Any way I gave it a try and I had to hard reset my PDA any way!!
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
helmi_c said:
I've upload a patch that contain a newer BTCeIf.dll (1.7 the original was 1.6) and HTC_PCM_Routing.dll taken from htc device. well... in my device I dont hv problem with memory issues, even without this patch.. I dont know for sure, cos i dont test it much...currently test workin Simultaniously is BTSYnc, SerialPort 1 in 1 out, and Audio Gateway. and its still work fine.
btw please post comment here, and also what rom u currently use. Otw now, just come to trow the patch..
Click to expand...
Click to collapse
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
NO HANDSFREE PROFILE
Hi
nice integration and thanks but i went back to ms as my sony ericson hcb-700 wll not pair for some reason after looks like the handsfree profile is not working
The Audio stream is great with this BT solution !
But when I connect to my parrot ck3300 carkit, It opens the connection like there is a tel.call active. when i press the hangup button on my carkit the BT connection is gone.
So it seems it is connected as headset and not as handsfree phone,
One other thing, when I connect to my BT Sony Ericsson HbH ds970 stereo headset I cannot shut off the screen in tcpmp player ???
(I think this also happened with th MS stack)
any solution for this ?
Last test (with my clean AKU3.2 v1.3) with BroadcommPatch1 applied and no overclock:
Turn on/off 4 times and reconnect below service (get bored to turn on/off and play with it again):
currently active BT service at the same time is:
1. Activesync / Bluetooth serial Out (syncing)
2. Network Acces/ Bluetooth Networking
3. Audio Gateway / Calling my mobile operator and stream audio to my pc as headset
4. Send/Recieve file from pc and from pda
5. Bluetooth serial In
and currently active application (leave as background procces I dont close it):
1. Activesync (Syncing)
2. Calendar
3. Contact (580 contact display)
4. Excel Mobile opening 185kb file
5. Album
6. Word Mobile opening 220kb file (little bit slow on opening)
7. Powerpoint Mobile opening 350kb file till end slide
8. Notes
9. Task
10. Bluetooth Manager
11. File Explorer
12. Calculator.
lastly...activate Wifi...wifi detecting & connect to neighbor network... turn off wifi...activated again...detecting & connect to neighbor network again...
but I dont test the GPS (serial port) or A2DP stuff since i dont hv it.
turn off bt...turn on again...reconnect the above BT service...do this 4 times.. still no memory issues. well maybe I'm just bein lucky... but the battery is drain more faster with this test, maybe because this is somekind of stress testing.
so far this Broadcomm stack still running well...the sound from Audiogateway while this test active is still ok, but if the gsm signal is bad, the sound is bad also, so its not bt problem its a gsm problem. btw the ShutXP Icon on the tray is GONE..thats weird.., that the only issue I hv..
btw does anyone know where to find a PC Widcomm/Broadcomm driver that support A2DP, I dont remember where to find it. My PC Widcomm driver version is v1.4.2 Build 12, quite old, I want to test the a2dp profile.
btw if u play with:
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugin\HandsFree]
"SupportedFeatures"=dword:37 (default doesnt exist)
"ServiceMask"=dword:1
"AudioSetupDll"="\windows\HTC_PCM_Routing.dll" (default MkSpk_PCM_Routing.dll need to play with this and see what more widely support device)
"AudioPreferences"=dword:2
"AudioHandling"=dword:13 (default 8 )
there's a Icon if headset is activated. but its seems unstable in my device, try it.
bigsteve said:
Hi Hemli
I have just installed this a minute ago,
Ill report back in a few hours with my experiances with this.
Hopefully it will be better than M$ BT stack with stereo headsets.
Click to expand...
Click to collapse
Waitin for ur input...
jakubd said:
Helmi, I just wanted to confirm, that Dial-Up with 2nd phone works fine. Tested also BT stereo headphones from HP (A2DP with additional profile for controlling playing - skipping to the next track and pause) - So far works as only BT implementation in BA allows: on close distance and not doing much in backgroud works fine.
Another happy user of your Firmware and other tools for BA!
Later on I will test GPS on BT, but do not expect any problems.
One small detail is left from old BT stack: while creating a connection you can still choose connection using "Bluetooth" that refers to M$ stack (selecting it reports hardware error - not rreally suprising
Click to expand...
Click to collapse
oops... well, maybe its a little bit tricky to strip out completely the old stack, but I'll try learn this... or any input is more then welcome
deepakr said:
Aha! The patch helped! I now have a fully functional headset, stereo on the headphones and a great speedy and stable ROM. Makes me one happy camper. Looks like now I can go ahead and finally configure this with all my apps. Thanks helmi
Click to expand...
Click to collapse
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut.
hey helmi_c,
Good to hear that deepakr, Btw I imatrix what u status man? is it workin with u (the patch)? if u still hv a static noise issues, try to delete the shortcut on the BTManager and re-create the Audiogateway Shortcut
Click to expand...
Click to collapse
yep still have the static noise, will try your method later.
been bz this few days, i did not test much. I will play around with it tomorrow.
thanks.
imatrix
Thanks Helmi, great job!
A2DP works nicely, but now i get the same opposite as compared to microsoft stack. my A2DP is perfect whereas any calls that come in ring through the hedset, but i can't pick the calls up / talk through the bluetooth headset. weird uh?
Anyone hit the same problem?
I have no problems with static, just some slowdowns due to processor usage and i can't toggle the screen in WM or using display switch.
Great Job though!
edit:
maybe its because i'm connected as both headset and high quality audio? going to try connect as hands free and HQA.
edit 2:
can't for the life of me find out how to pair it in handsfree mode! Any pointers?
I have an MDA Vario III branded phone using the HTC ROM 1.56.405.5 and a sony MEX-BT2500 (Bluetooth enabled stereo with A2DP).
http://www.audio66.com/product.asp?id=5616&cat=1&man=6&main=1&userid=&firstsel=cat&variation=
The A2DP works well (except it's a pain to enable/disable it using the WM6 interface!) and I can make outgoing calls fine with the phone paired with the Sony but when incoming calls come in, the ringer is routed to the stereo but when I answer it the voice doesn't and I have to hang up and call the person back.
I paired my work Nokia with the stereo and both incoming and outgoing calls work fine.
I tried the original T-Mobile ROM and still had the same trouble.
I'm assuming (with no knowledge of what I am talking about) that the bluetooth stack on WM6 has some issue with routing incoming calls but I can't find any reference to this problem anywhere else and it would seem to be the kind of problem I'd expect millions of users to have a problem with and that there would be a lot of posts.
Does anyone else use bluetooth handsfree? Does it work properly? Does anyone use a bluetooth stereo and A2DP? Does it work properly? Does anyone know if there's a fix?
Thanks for the info in advance...
mine works Ok with my BT2500 although sometimes it needs to be re-paired
Info
Can you tell me what ROM version you have and what model your phone is, radio version, installed programs etc? so I can try changing things.
If you hae a2dp music being streamed and a call comes in does it still work?
ROM is UK Vodafone out-of-the box original (v1615 = Tytn II) 1.56.161.4
Radio is 1.27.12.11
Have Seuth255's A2DPFix from the Hermes forums (prevents skipping)
MS Voice Command V1.6 (i have a SE BT headset too)
Remainder are general apps, gps etc.
haven't tried a call when music is streaming. will do later and let you know
Works for me too, with the original HTC ROM.
Everything is working fine here. I have a MEX-BT2507X, and there's some random 0.2sec cut every 15mins of playtime, but that's not a problem.
Have you used the quickfix from HTC?
jym04 said:
Everything is working fine here. I have a MEX-BT2507X, and there's some random 0.2sec cut every 15mins of playtime, but that's not a problem.
Have you used the quickfix from HTC?
Click to expand...
Click to collapse
I didn't know about the HTC Quickfix. I've just downloaded it and installed but haven't got round to leaving the PC to test it yet. I'll give it a go later and post back.
Fingers crossed...
Audio not working
My audio is not playing through the car speakers with the BT-2500. I had it professionally installed, but was running late to class so I didn´t fully test it until I got home a few hours ago.
I can control the tracks and play/pause, accept/end calls, and the dash microphone works, but my audio is not being pushed and played for some some reason (does work for CD, and Radio). I tried repairing numerous times, resets, and different programs, but no luck... but audio push worked great on a handsfree kit.
any ideas are greatly appreciate... I will take this back to the shop tomorrow, but I would like to know if anybody else experienced this and how they fixed it.
Thanks!! =)
btw, I use stock AT&T rom
eayuwna said:
I didn't know about the HTC Quickfix. I've just downloaded it and installed but haven't got round to leaving the PC to test it yet. I'll give it a go later and post back.
Fingers crossed...
Click to expand...
Click to collapse
...much, much later...
I finally got round to trying it out and even with the quickfix I still have the same problem. My mate also has a Kaiser so I borrowed that (UK O2 ROM I think) and that doesn't work either.
Most odd. maybe I'll ring Sony.
I have the same problem with my Jabra 620s. Maybe somethings wrong with the headset itself?
Can you let me know ur ROM, radio versions so I can see if we have anything the same.
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Papamopps was asking this same question to me the other day....
I am trying to fix this one just keep coming back everyday for new posts.
Unless somebody else allready found the fix. Post this here. Thanks
mhhhh i will have a look at it....
... because after ayerthons workout for standy music.....
.... i bought a headset and 4gb sdhc card.
we´ll find a way for a2dp to work....
As I found in other threads and devices - try to use HTweakC for a2dp problems.
I also PM ithe that some cooks take 2 files from old ROM WM6 and replace the new files on WM6.1 with them - did teh trick for some...
or try this fix:
http://forum.xda-developers.com/showpost.php?p=1066713&postcount=1
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
hmm but wep200 is just not compatible with a2dp.. to use it to listen music you may use bluemusic, bt toggle or bt audio toggle (and im think there is a few more programs) but the quality is (i couldnt find a word) awful.
i didnt try a2dp on itje's roms but it works "out of box" on opentouch 3.0(same build) and pdaviet 6.1
im using motorola ht820 headset which ofcourse support a2dp.
marty123 said:
Not sure if this is your problem or not, but to get music, GPS prompts, etc. from my Wing to my mono Bluetooth headset (Jabra250V), I used a utility called btaudio. Not sure at the moment where exactly it is located, I've seen it both as a .zip and a .cab file. A quick search should locate it along with more information.
Click to expand...
Click to collapse
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
papamopps said:
yes for mono ofcourse
BUT we are searching for the ability of using the built in A2DP - that is stereo sound and can only be used by stereoheadset...
thanks
Click to expand...
Click to collapse
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
choodyessas said:
First of all, I want to give a special thanks to itje for his worderful work making BEST rom for everyone.
I am using Touch-IT wm6.1 Black version but I have question with bluetooth headset setup activating A2DP. I have been searching all the posts and tried many things to my Wing and my bluetooth device (Samsung WEP200) but didn't help either didn't work any of them. How can I use my headset not just answering calls also listen to music & movie? Please help me..
Click to expand...
Click to collapse
Sorry if I confused you guys
marty123 said:
I don't believe the title of this thread accurately describes the poster's problem, hence there are two trains of thought on the solution. The A2DP in Touch-IT wm6.1 Black is one issue, the other being getting the WEP200 headset to work with audio other than phone calls. As slimag posted, his headset is not compatible with A2DP, so any work along those lines will most likely NOT help choodyessas. I choose to try and help with their underlaying question.
Click to expand...
Click to collapse
Sorry if I confused you guys but I believe my headset WEP200 works with A2DP because I tried on Open Touch wm6.1. I didn't set A2DP tho... I am not sure if the ROM cooked with it but it worked. The real problem is that I can not use Open Touch because my wing freezes ALL the time.. so I'm more into itje's ROMs..
So uhm.. sorry for not responding to the original TS - but am I to understand that there are bluetooth stereo issues with the 6.1 WM roms?
I bought a sony ericsson ds980 stereo bluetooth headset the other day. My phone is currently being repaired by HTC (at least, I hope it is) - I intend to flash Itje's latest wm6.1 ROM to it the second I have my mighty Herald returned to me.
But... WM6.1 doesn't work well with Stereo Bluetooth you say? Even with the suggested fixes in the posts above?
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
which fix?
I only said let´s try this fix. I´ll get my headset during this week and i will try it.....
mapleman321 said:
out of curiousity does anyone know the params that Battery status uses to launch A2DP? i want to make a shortcut, the tray launch is hard to hit sometimes,
and thanks for the fix
Click to expand...
Click to collapse
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
slimag said:
try a2dptoggle (found on this forum) - it has todayplugin but can be used without it as a shortcut.
Click to expand...
Click to collapse
here you go.....
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
papamopps said:
NO probleme here.
Just got my Motorolla S9 (40€) paired it and started music with Audiomanager.
... pairing = no problem
... skipping music = no problem
... doing a call = no problem!
Great.... adn with the music in standby PERFECT!!!
Great.
Damn . i have to sent my XDA to service because of a LCD demage...
Now as I found the perfect setting....
Hahahahahaha
Indoor I can even go out of the room. And if I loose connection .... it pairs automaticly again when inside of range...
Great
Click to expand...
Click to collapse
Awsome to hear this..Now I am going to stop my research. And start searching for another great TWEAK
And i think i'm going to buy a headset to
Hi, pros!
I also have a little bluethooth problem
My headset (OMIZ5140) connects smoothly, both Wireless Stereo and Hands Free services are enabled.
It works good as Hands Free for the first call, but after I hang up nothing is heard, not in the headset, nor in the device itself.
The sounds are back only after reset (disconnecting the headset and turning off bluetooth doesn't help).
On the other hand, it doesn't work as Wireless Stereo at all - the sound in the music player, for example, streams from the device anyway.
Please advice.
Configuration:
ROM - Dutty's Diamond 5.2.20758.1.4.1 Full CVSD (V2.6 RC1)
Radio - 1.00.25.05
Thanks!
JBaruch
I had exactly the same problem.
ben cole said:
I had exactly the same problem.
Click to expand...
Click to collapse
You HAD this problem? Does it mean you solved it?
I'm having the same issue with my Bluietooth carkit. I can call 1 time and after that it does not work anymore.
If anyone has a solution for it I would be very thankfull!!
i have also started another topic on bluetooth, not exactly the same problem but close, you can check it for your reference.....
lit2fly said:
i have also started another topic on bluetooth, not exactly the same problem but close, you can check it for your reference.....
Click to expand...
Click to collapse
Link, please.
i think you will find that it is Dutty's ROM causing the problem, its a known bug that the bluetooth is a bit dodgy. (not sure on specifics)
mugglesquop said:
i think you will find that it is Dutty's ROM causing the problem, its a known bug that the bluetooth is a bit dodgy. (not sure on specifics)
Click to expand...
Click to collapse
Thanks for the info, I'll try to PM this topic to Dutty.
Anyone have a problem with their Raphael (assuming it's a HTC Touch Pro) dropping bluetooth (especially headsets)?
I've got two bluetooth headsets and this phone, halfway through a call, at no predictable time will ditch the headset whilst leaving the call active...nightmare.
HTC don't wanna know about it, does anyone else have this trouble and better still, has anyone got a fix for it?
Cheers
T
Yes and actually I complained today to the callcenter of HTC in the NEtherlands. There is no normal way to connect bluetooth to a carkit and many problems with a headset (Bluetrek G2). HTC admits there are problems with carkits and headsets. My TP evne starts to go on and off.A hard reset is my last resort and then I have to send it to HTC...... Good luck. Greetz Ton
ton66 said:
Yes and actually I complained today to the callcenter of HTC in the NEtherlands. There is no normal way to connect bluetooth to a carkit and many problems with a headset (Bluetrek G2). HTC admits there are problems with carkits and headsets. My TP evne starts to go on and off.A hard reset is my last resort and then I have to send it to HTC...... Good luck. Greetz Ton
Click to expand...
Click to collapse
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
It is a big problem for my! Bluetooth connection disconnect after a few minutes (of my car system).
halloj said:
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
Click to expand...
Click to collapse
Original HTC rom or a branded one. The branded T-mobile rom in the Netherlands is good. No connection problems what so ever. So I asked why HTC doesn't copy the T-mobile rom (lol)........
ton66 said:
Original HTC rom or a branded one. The branded T-mobile rom in the Netherlands is good. No connection problems what so ever. So I asked why HTC doesn't copy the T-mobile rom (lol)........
Click to expand...
Click to collapse
HTC unbranded one...which is even more unbelievable.
rinsel said:
It is a big problem for my! Bluetooth connection disconnect after a few minutes (of my car system).
Click to expand...
Click to collapse
Which makes me believe that your car system doesn't have the correct standard.
i need sone help regarding bluetooth
i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can you help me?? please.. i've been searching some help for this matter but i have not got any answer yet....
thank you
excelex said:
i'm trying to pair my bluetooth headset (Samsung WEP200) but everytime i put the pin number (that is given by the bluetooth headset) it always said "Your Device did not connect with Samsung WEP200. The connection Failed or the passcode is incorrect".
and how to install the hotfix (the hot fix from HTC website) on my HTC Touch Pro? everytime i copy the .exe file into my device, and run it, i always got an error box. Incorrect Device, "Please use the correct Device to Install This Hotfix program!" i don't know how it happen, i download this from HTC support page. i select the phone (HTC Touch Pro) and in the "Software Download" tab it show that there are 3 available download, the Hotfix, the Rom and Application.
can you help me?? please.. i've been searching some help for this matter but i have not got any answer yet....
thank you
Click to expand...
Click to collapse
What hotfix?
halloj said:
What hotfix?
Click to expand...
Click to collapse
hmm i think they (the HTC) name it "Hot fix to enhance WAP security for HTC Touch Pro" ... it's on their website (http://www.htc.com/www/supportdownloadlist.aspx?p_id=140&act=sd&cat=all), but i was not able to install it on my raphael..
but my first priority is to make my bluetooth headset works with my HTC Raphael... can some one help me??
Losing bluetooth connection also occures with the T-mobile Dutch rom. (using original carkit of my Opel/vauxhall Vectra) Bluetooth on mij Vario IV is completely switched off after beeing several minutes connected. No problems with other bluetooth connections.
yes i have been having this problem lately, never had it before though, but all of a sudden it happens now, i will have to power down my headset and power back on in order to re estabilsh a connection
halloj said:
I've been using mine with two different JVC bluetooth radioheads and I don't
have any problems. Also different headsets, no problem.
Click to expand...
Click to collapse
A hard reset has solved a lot of all my connection problems. I could not believe that this would solve anything but now i am convinced. It really works. Even the GPS fix is now really good (sorry might be off topic).
Greetz Ton
I have a bluetooth carkit from Nokia and have a problem when recieving a call. A outbound call using the carkit is going good but when recieving a call it doesn't use the carkit but the phone.
Who has a solution?
ronald-is said:
I have a bluetooth carkit from Nokia and have a problem when recieving a call. A outbound call using the carkit is going good but when recieving a call it doesn't use the carkit but the phone.
Who has a solution?
Click to expand...
Click to collapse
Are you answering the call with the buttons on the phone, or on the carkit? AFAIK answering with the buttons on the phone will always route the call direct to the phone, and bypass any headset or car kit.
Cheers,
Steve.
StevePritchard said:
Are you answering the call with the buttons on the phone, or on the carkit? AFAIK answering with the buttons on the phone will always route the call direct to the phone, and bypass any headset or car kit.
Click to expand...
Click to collapse
I will try this tomorrow! thanks!