Every time I plug my Bionic into the computer, it goes to a Verizon Media Manager website.
What software is responsible for this sh*t???
The phone drivers. If you look down in your system tray for an icon with the Motorola icon, right-click it, then go to "When Device Connects...", then click Do Nothing.
Right click on the blue Moto icon in the system tray, then find the option where it says "When this device connects" and change it to "Do Nothing"
Edit: 3 seconds too late.
abuttino said:
Every time I plug my Bionic into the computer, it goes to a Verizon Media Manager website.
What software is responsible for this sh*t???
Click to expand...
Click to collapse
I know on my old Fascinate, computers that I had not installed drivers on, would do the same thing. However on this phone, I installed the drivers before plugging the phone in for the first time and it hasn't done it. Guess it doesn't really answer your question but just something I had also noticed.
sfreemanoh said:
The phone drivers. If you look down in your system tray for an icon with the Motorola icon, right-click it, then go to "When Device Connects...", then click Do Nothing.
Click to expand...
Click to collapse
I have all the drivers installed but I don't seem to have that icon in my system tray?
it happens with all moto phones not just this one
jessie02 said:
I have all the drivers installed but I don't seem to have that icon in my system tray?
Click to expand...
Click to collapse
Also, the phone needs to be in a USB connection mode, not just a charging mode.
That was easy enough...
Thanks!
Don't understand why they need to spam the user as soon as they get the phone.
abuttino said:
That was easy enough...
Thanks!
Don't understand why they need to spam the user as soon as they get the phone.
Click to expand...
Click to collapse
$$$$$$$$$$$$$$$$$$$$$$
Related
Just looking around for a solution to that annoying notification sound that blasts whenever I plug in my phone via USB. I think I disabled it once but I recently wiped and can't find any options to disable it now.
I know when I plug my phone into USB, I don't need a notification sound to let all my co-workers know I'm plugging in
I guess a temporary fix is to just turn off the volume, but I would very much like to just be able to disable the notification.
Proxin said:
Just looking around for a solution to that annoying notification sound that blasts whenever I plug in my phone via USB. I think I disabled it once but I recently wiped and can't find any options to disable it now.
I know when I plug my phone into USB, I don't need a notification sound to let all my co-workers know I'm plugging in
I guess a temporary fix is to just turn off the volume, but I would very much like to just be able to disable the notification.
Click to expand...
Click to collapse
Go to settings>sound & display> uncheck sd card notification.
supremeteam256 said:
Go to settings>sound & display> uncheck sd card notification.
Click to expand...
Click to collapse
Hmmm... it is unchecked already. But the sound still is there when I connect USB.
Might be a bug in CyanogenMod 4.1.9.2? I recently updated to it and I didn't notice it on earlier versions.
Proxin said:
Hmmm... it is unchecked already. But the sound still is there when I connect USB.
Might be a bug in CyanogenMod 4.1.9.2? I recently updated to it and I didn't notice it on earlier versions.
Click to expand...
Click to collapse
I don't know about that. I've been to lazy to update so I just know that works on his earlier version.
Good call. I'll submit a bug report and see if anyone else has the same problem.
If it's just on mine, well FML then.
What is the exact notification name? Is is "USB Connected" or "USB debugging connected"
Fingerlickin said:
What is the exact notification name? Is is "USB Connected" or "USB debugging connected"
Click to expand...
Click to collapse
I get both, actually... not sure which one is giving me that sound either.
Well there's another thing to do would be just to disable your notification sound all together, but then you wouldn't hear if you get a message unless you use an alternate messaging app.
Where you been fingerlickin, this day is just draggin.
sorry, work is busy today.
you are getting the sound from both of them. one can be disabled by supreme's suggestion the other is disabled by disabling usb debugging mode in the development menu
Fingerlickin said:
sorry, work is busy today.
you are getting the sound from both of them. one can be disabled by supreme's suggestion the other is disabled by disabling usb debugging mode in the development menu
Click to expand...
Click to collapse
I'm suppose to be busy, I just can't seem to get motivated. O well 30 to 40 minutes left to go. Man Gridlock is really playin capt aint he.
he deserves his own flame thread imo.
Fingerlickin said:
he deserves his own flame thread imo.
Click to expand...
Click to collapse
Yessir, I'll give him one more day. He told me this morning he prolly wouldn't be on again today, but thats no excuse. You hear that out there Grid thats no excuse. If not we will have to dedicate something to him.
Yup, that worked, thanks.
Wonder if it will prove problematic for adb...?
Proxin said:
Yup, that worked, thanks.
Wonder if it will prove problematic for adb...?
Click to expand...
Click to collapse
What having the usb debugging unchecked?
supremeteam256 said:
What having the usb debugging unchecked?
Click to expand...
Click to collapse
Yeah, that was it. Sorry I forgot to quote the message I was referring to
Proxin said:
Yeah, that was it. Sorry I forgot to quote the message I was referring to
Click to expand...
Click to collapse
I would assume, I would think whenever you use adb just remember to check that.
good.
keep in mind that ADB will not work and the su app might timeout with usb debugging turned off.
Disable usb connect sound - windows
Proxin said:
Just looking around for a solution to that annoying notification sound that blasts whenever I plug in my phone via USB. I think I disabled it once but I recently wiped and can't find any options to disable it now.
I know when I plug my phone into USB, I don't need a notification sound to let all my co-workers know I'm plugging in
I guess a temporary fix is to just turn off the volume, but I would very much like to just be able to disable the notification.
Click to expand...
Click to collapse
Simple solution is to set the windows device connect to none.
I'm on Fresh Toast 2.1 (official eclair w/ fresh customizations)
When I plug in a USB cable to my phone from any computer, from any OS (OS X 10.5, 10.6 and Win XP/7) I don't get offered the option to mount as a drive.
I looked in the 'Connect to PC' settings and tried it with 'Ask Me' both checked and unchecked. I also tried to make Disk Drive mode the default and that didn't help either. The only way I can mount it the SD as a drive is by rebooting to Recovery and toggling MS.
What a pain! Any ideas?
Are you using the app. Autostarts? I had that exact same problem until I realized that I disabled PC Synchronization (using Autostarts) from starting up when the phone boots. Once I re-enabled it again it worked just fine.
check on the top left of the status bar, if you can see a triangle with charge only, then slide down the status bar and press on charge only... let us know if this works. Also make sure that debug is off, menu> settings> applications> Development
Yeah, I'll bet what you did, dude, is set it to "Always use this option" when you plugged it in one time, maybe on purpose, maybe on accident, but who cares, that's probably what it is. Is that option even existing on certain roms? I just checked, mine doesnt say that. Worth a shot lol.
dametzg said:
Are you using the app. Autostarts? I had that exact same problem until I realized that I disabled PC Synchronization (using Autostarts) from starting up when the phone boots. Once I re-enabled it again it worked just fine.
Click to expand...
Click to collapse
Crap, I think you're right! Trying this now; i disabled everything. Will report back with results.
UPDATE: Nope, that wasn't it. PC Synchronization isn't even an option for me to enable/disable.
SAlpIche said:
check on the top left of the status bar, if you can see a triangle with charge only, then slide down the status bar and press on charge only... let us know if this works. Also make sure that debug is off, menu> settings> applications> Development
Click to expand...
Click to collapse
Not the issue here. I'm not a noob.
But why disable debugging? I've always been able to do both simultaneously without issue. Until Fresh Toast 2.1, that is.
jerry43812 said:
Yeah, I'll bet what you did, dude, is set it to "Always use this option" when you plugged it in one time, maybe on purpose, maybe on accident, but who cares, that's probably what it is. Is that option even existing on certain roms? I just checked, mine doesnt say that. Worth a shot lol.
Click to expand...
Click to collapse
Negative.
Is it possible that it is recognizing it as a charger instead of a computer? Have you tried other cables and/or computers?
scirio said:
Crap, I think you're right! Trying this now; i disabled everything. Will report back with results.
UPDATE: Nope, that wasn't it. PC Synchronization isn't even an option for me to enable/disable.
Click to expand...
Click to collapse
Oh weird. The PC Synchronization shows up in the section called After Startup for me. Hope you get it figured out.
dametzg said:
Oh weird. The PC Synchronization shows up in the section called After Startup for me. Hope you get it figured out.
Click to expand...
Click to collapse
Thanks worked great for me haha first time looking thru the startup programs I completely missed it
This may be nothing as I'm not a dev... but when I first plugged my phone into my computer a popup came up and I noticed it had "run bootstrapper.exe" in the window.. I just closed it, but now I can't seem to get it to show again no matter what USB mode I use...
ckarrow2 said:
This may be nothing as I'm not a dev... but when I first plugged my phone into my computer a popup came up and I noticed it had "run bootstrapper.exe" in the window.. I just closed it, but now I can't seem to get it to show again no matter what USB mode I use...
Click to expand...
Click to collapse
Moved to proper forum.
I wasn't asking for help. I was just stating that I saw the bootstrapper.exe at first connect.. hoping that it might help with development... sorry
It looks like bootstrapper.exe is part of a microsoft installer application, something to do with msiexec.exe So I am afraid this file that you have seen running has nothing to do with the bootloader on the handset, nice post for thinking out of the box however
How do i keep all the motocast bs from poping up on my computer everytime i connect the two? It install's itself everytime and it drives me nuts
I am afraid this is from the driver. It is a pain whenever I am using Windows. Thankfully, it does not happen on Linux.
Sent from my DROID4 using XDA
Briteyez83 said:
How do i keep all the motocast bs from poping up on my computer everytime i connect the two? It install's itself everytime and it drives me nuts
Click to expand...
Click to collapse
If you're talking about what I think you're talking about try this, it worked for me.
Next time you plug in your phone you should see an icon down in your taskbar that looks like a phone with a red dot in the lower right corner of it.
If you right click on that icon you'll get a popup menu that says "when device connects >" that'll take you to a second menu letting you set what happens. I chose the bottom option of "do nothing"
See if that solves the problem.
Thanks. I actually found the answer to my question the day before this thread was answered
Briteyez83 said:
Thanks. I actually found the answer to my question the day before this thread was answered
Click to expand...
Click to collapse
Thumbs down to you then for not appending it to your thread!
I got my Gear Live off eBay last week. Didn't come with anything but the watch, and just got the cradle from China. And it's definitely Chinese.
It's a third-party cradle, and it lacks USB data. I know this because across three computers, it doesn't detect a device. All I can do is charge this thing, and use 4.4W. I can't force it to grab an update, and because the cradle can't do data, I can't ADB into the recovery when I can force it (I have to route commands through the phone's bridge).
I'm desperate here. Is there ANY WAY to work the Bluetooth ADB and force an update, or at least move an update and flash it manually? I'm seriously low on funds, and this is killing me to not have the software updates.
As a note, I purchased my cradle from this guy here on eBay. If I hadn't instantly given positive feedback, I'd yell about it not supporting data. This is real bull.
EDIT: Seeing as it's a cheap charger anyway, I figured I'd pry it apart to see what actually makes this thing tick, and the results are supremely underwhelming. I've attached photos, but I can't see them being anything more than voltage regulation, to ensure nothing bursts into flames.
Go to https://www.youtube.com/watch?v=x7oRjESQh_o
Follow the video fro unlocking the Gear Bootloader. Make sure to use v2 of his software. v3 is riddled with bugs. Once you unlock the software, use option 8, then reboot. Load back into the flashbooter/recovery menu, then use option 6. Update from there using OTAs.
Read my post. Actually read it.
I CAN'T GET A DATA CONNECTION VIA USB.
UltimaXtreme said:
Read my post. Actually read it.
I CAN'T GET A DATA CONNECTION VIA USB.
Click to expand...
Click to collapse
Have you tried debugging over Bluetooth?
BRANDENDEUCE said:
Have you tried debugging over Bluetooth?
Click to expand...
Click to collapse
It disconnects after rebooting into Recovery. Unless it's possible to throw a flash down while in the OS, I think I'm gonna concede and grab an OEM cradle.
delete
Hello guys!
I have a situation also with a device. I just received today, it has 5.0.1 on it, and i cannot use the tool that is specified in that video + after activating the dev. menu, i dont have the usb option ...
Any advice ?
R3d_Wolf said:
Hello guys!
I have a situation also with a device. I just received today, it has 5.0.1 on it, and i cannot use the tool that is specified in that video + after activating the dev. menu, i dont have the usb option ...
Any advice ?
Click to expand...
Click to collapse
You can force the watch to boot into bootloader mode. Turn off your watch. Press power button and at the same time start swiping from top left corner of the screen to bottom right. (Diagonally) Do it multiple times.
aligatro2010 said:
You can force the watch to boot into bootloader mode. Turn off your watch. Press power button and at the same time start swiping from top left corner of the screen to bottom right. (Diagonally) Do it multiple times.
Click to expand...
Click to collapse
Thanks for your reply aligatro2010, but i decided to return the device and got something else .