Related
Hello all,
first, a big thanks to all the rom developers around. You transformed my Diamond in a usable and enjoyable tool.
What happened to me tonight is very frightening. In fact, I cannot believe what happened.
And this is the story: I was at a birthday party and later in the evening I checked my phone : it seemed to have frozen, so I rebooted it as I do sometimes when I have no other choice. But this time something strange happened : I got the following message "this concludes the beta test of this software release. thank you very much for your time and effort in helping make this a great product for our customers" - what the ... ? No way to make a call, the message is impossible to remove... completely blocked !!!
I don't remember exactly the rom I flashed last because I sometimes change. It might be a dutty's release (75%M sure) - anyway I was in a very bad situation because my wife wasn't feeling well and I couldn't call her without finally borrowing a phone from someone.
I will flash a new rom tomorrow and I hope that the message will disappear but I can tell you that it is a very strange feeling when suddenly your phone refuses to operate normally. It's a nightmare.
I hope that someone has an explanation for this because I don't want to go trough this situation ever again, it's just so annoying to have a phone which tells you "No you can't use me; your trial period has expired" when you need it he most.
Thank you for your opinions in advance
Have you tried a hard reset?
Yep same problem here.
Using duttys 1.93 - Can't get to his website either.
Hard rest does not work - had to reflash back to branded (Telstra) ROM
i'm having the exact problem right now, what can i do to fix this? someone told me to reflash it but how? i'm VERY new to the diamond
hardreset does not work
I bought the phone from a person so it's second hand. The seller did mention he updated the ROM, I'm assuming this is the cause of the problem? help please
thanks!
I am getting the exact same problem.I do not know what to do.
Sigh and since my computer will not sync, I cannot reflash it. Hard set is also a no go.
ya I cant sync it with my computer either... i'm searching other sections on this forum and I cant seem to find one that teaches you how to flash without syncing with the computer
OK i got it well kinda sorta. If you hard reset and just use the date taht dutty had then your phone will load. Do not correct the date and you should also change the date on your computer so that it wont sync. Then donwload his new rom or whatever rom you prefer and then flash it. Then change the dates back. It worked for me.
thanks.. do you have the link for the new rom?
I'm going to give it a try
The link it dutt'y new rom is here http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
just a question how do you flash it?
can you help me? i'm very new to this phone
I had the same problem last night- expired beta software. If I do a hard reset I believe I will loose all the info on the phone, is that correct?
I was thinking that changing the date will work, is there another way to change the date without having to loose the info?
Someone has a reliable link to an instruction on how to flash the ROM?
I am also using throy 2.3, to find the latest release please go to WWW.DUTTYTHROY.NET
Any help appreciated.
!everyone! you can flash roms from bootloader. hold volume down and the little red reset button, keep holding vol down untill bootloader. at the tri color screen, run ruu from host pc. everything will be fine with this method. just like activesync.
ok i to change the time and stuff and it actually can sync using active sync.. however.. when tried to install HSPL 1.24 after the part where the phone will turn black.. i click on the DiamondCustomRUU as instructed
but it says this "The application failed to initialize properly (0xc0000135). CLick on OK to terminate the application"
Is there a way I can recover this without losing all that is on my phone?
Do anybody know the password for the latest ROM 2.9 from Dutty? His page is unavailable right now....
Duttys V2.9 RTM Finale
someone please tell me how to flash.. from scratch? i hard reset my phone.. and i cant get HSPL to work. When i install the activesync way, the black screen turns on then i cant open DiamondCustomRUU
if i do i the bootloader way, when i connect from the three colour screen it cant pick up the phone because it says i'm missing Qualcomm CDMA Technologies MSM
please help been stuck for hours already
i won't flash Duttys ROM again!!! Right now i need my phone and it doesn't work! And if i reflash it i lose my data....
never again!
its you have a problem with duttys rom
you need to use his thread to point out your problems....
not this one.
I tried to upgrade my 8125 using Shelltool earlier this week. I used the tool successfully before and so I was assuming that things would just go well.
Unfortunately, I ended up being stuck on the bootscreen. I can also still go into Bootloader mode and so I figured all I need to do is to download the Wizard Love ROM, go into Bootloader mode and apply the ROM to restore an older version. Well, for some reason the RUU utility keeps telling me about a communication issue even though I already disabled USB in Active Sync and I also killed the program using Task Manager...
What am I missing here? I am hoping that someone can enlighten me...
Thanks,
Jens
For some reason I was finally able to flash my 8125 with the Wizard Love ROM this morning. Flash completed and I was back to an old working ROM.
Unfortunately, when I flashed it with the latest CR86 it flashed fine, but then I am stuck on the Bootloader screen. Already tried it twice and just running it a third time, but I am puzzled...
Any help?
Thanks,
Jens
jstraten said:
For some reason I was finally able to flash my 8125 with the Wizard Love ROM this morning. Flash completed and I was back to an old working ROM.
Unfortunately, when I flashed it with the latest CR86 it flashed fine, but then I am stuck on the Bootloader screen. Already tried it twice and just running it a third time, but I am puzzled...
Any help?
Thanks,
Jens
Click to expand...
Click to collapse
its on its last flashes my friend(or maybe just tire of custom roms)
but just before mine died, it would do that, until i was stuck on the bootloader and the screen would just die, i would have to leave it off then turn on but the same, after that i just left it alone
i could not flash anything on it and i could not see it suffer anymore
i still have it but dont have time to bring it back to life, at least it blinks at me
That's what I was worried about...
Strange thing is I probably only flashed it about 10 times... Very frustrating!
Thanks for your reply!
Hmmm, I just tried the old Wizard Love ROM again and it worked right away.
What am I missing here? I am trying to get to the new CR85 6.5 ROM, but I always end up being stuck on the bootscreen loader. I mean it shows me the HTC screen, but then it goes straight to the bootscreen...
Any suggestions?
I am back in business!
It turned out that flashing back to an older ROM disabled my HardSPL. I guess a case of user error on my end...
Anyhow, I also experienced the fading display mentioned above and I think that's just a sign of a weakening battery. It seems that the phone doesn't charge fast enough over USB in Bootloader mode.
So, if you run into the same problems like me:
- Charge your phone using the charger when you are stuck in Bootloader mode for extended amount of times!!!
- Flash an old provider ROM or Wizard Love ROM
- Re-apply HardSPL if needed
- Upgrade to a newer ROM
Cheers,
Jens
I recently got an htc diamond from bell and tried unlocking it, but every time i tried the diamunlocker.exe gives me a connection error (260 or 262). Any help would greatly be appreciated !
i tried that unlocker, but got stuck after flashing Radio 1.20, couldnt proceed into windows after that. eventually had to unlock it by code for a tenner, try this out if you cant unlock it by yourself. http://shop.ebay.co.uk/merchant/gadget_international
showtime21 said:
I recently got an htc diamond from bell and tried unlocking it, but every time i tried the diamunlocker.exe gives me a connection error (260 or 262). Any help would greatly be appreciated !
Click to expand...
Click to collapse
unlock to do what? load custom roms?
if so, ur doing the wrong procedure. The phone isnt locked as its CDMA and if ur using an unlocker to load custom roms...
mixxy said:
unlock to do what? load custom roms?
if so, ur doing the wrong procedure. The phone isnt locked as its CDMA and if ur using an unlocker to load custom roms...
Click to expand...
Click to collapse
yeuh thats all i really want to do i'm trying to load custom roms so im pretty noob so what shud i do ?
showtime21 said:
yeuh thats all i really want to do i'm trying to load custom roms so im pretty noob so what shud i do ?
Click to expand...
Click to collapse
yeah i'm pretty much where you are, noobage and all. and i found this to be really helpful http://forum.ppcgeeks.com/showthread.php?t=36062
ufbritt said:
yeah i'm pretty much where you are, noobage and all. and i found this to be really helpful http://forum.ppcgeeks.com/showthread.php?t=36062
Click to expand...
Click to collapse
yeuh i tried that, the diamond unlocker is giving me problems with all the errors, it doesnt even get to the bootloader screen. do any of you know if therre is active sync for 64-bit vista ??
You need to download windows mobile device center.
rogerluo1985 said:
i tried that unlocker, but got stuck after flashing Radio 1.20, couldnt proceed into windows after that. eventually had to unlock it by code for a tenner, try this out if you cant unlock it by yourself. http://shop.ebay.co.uk/merchant/gadget_international
Click to expand...
Click to collapse
pfft, for a tenner you could have got help on that program from us (OliNex)
showtime21 said:
I recently got an htc diamond from bell and tried unlocking it, but every time i tried the diamunlocker.exe gives me a connection error (260 or 262). Any help would greatly be appreciated !
Click to expand...
Click to collapse
you should use the ppcgeeks link, and just make sure your WMDC is the latest version from microsoft
Vista/7 + my CDMA bell diamond = does not play very well.. XP works fine..
I have to go into bootloader in order to flash anything, be it unlocker, rom or radio. take off back casing, make sure phone is in standby and press and hold the volume down, reset button beside the battery, and the the power button until it goes into the bootloader (i.e you are holding down the three buttons at the same time)
Its hit or miss for some people, but you definitely need the newest version of WMDC so I would try that first. Some people even need to disable USB connections in WMDC in order for it to work too.. so try these two things first, and if that does not work try going into bootloader..
My Bell Diamond needed to be unlocked! however, i couldn't do it on my laptop running vista, the program kept crashing. get an XP computer, run activesync on it, download the CDMA unlocker, and run it! VOILA. you should have no issues loading custom roms on your phone on vista tho! G/L
Hey guys,
I've searched everywhere but there's no definitive guide to revert to stock from WP7. Pretty much, I tried out WP7 on my dad's HD2, but he didn't like it. So I need to revert it, but there's so much stuff to know that it all gets pretty intimidating.
Anyways,
HTC HD2 w/ Windows Phone 7 (Using aMAGLDR V1.12 - Build: Jan 12 2001, 21:09:22 - by Cotulla 2011 [this ONLY, no other mods present])
Trying to convert back to Windows Phone 6.5
Using Windows XP
Have d/led Windows Active Sync but it won't connect to the PC even when the USB is plugged in. (I'm guessing this is the reason why I can't revert to stock, it won't even connect to the PC)
I've also d/led the latest stock RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship from the forums.
It looks like I have all the resources but my PC won't even recognize the phone being connected to the computer. Must I do anything else besides attempting to flash the stock ROM?
Thanks A LOOOOTTTTT in advance!
I have the Exact same question anybody help please?
It might be you don't have the drivers installed that are needed, your antivirus could be preventing a connection, I had a similar problem where it seemed that it didn't recognize my phone uninstalled sync when into my bootloader it didn't seem to recognize my phone tasked 29 and it went through without a problem
::BUMP::
PLEASE someone help me out, this is getting soo frustrating, I switched to my laptop running Vista and it still won't recognize it.
I d/led Windows Mobile Device Center and it STILL won't work.
Please anyone.
Enter the bootloader screen then plug phone in and wait for it to say USB at the bottom then flash the stock rom from t-mobile
Sent from my FutureShocks HD2 MIUI using XDA App
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
xmoo said:
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
Click to expand...
Click to collapse
dude u been around here long enough, no need for name calling
actually im having the same issue as of today
http://forum.xda-developers.com/showpost.php?p=11418541&postcount=1526
i was able to flash winmo through sd card but 10 different pcs wont see this phone now, from win xp to vista, win 7, mac !
phone works fine in winmo but cant connect, obviously cant flash hspl3 so im stuck on stock winmo, with both spls 2.8 and 2.10 and none of them makes a different
i'll bookmark this and keep following up and if i figure it out i'll update
back to stock LEO
I have same problem i install 2.2 android on my HTC hd2 (t-mobile) and now i can't sync my phone with computer to install stock LEO as well as there is no option on the 2.2 froyo for sd card if any one know how to get back to stock windows 6.5 let me know
I can't find the stock rom on tmobile
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
tmobile stock rom.
Invalid IMEI???
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
webmanny said:
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
Click to expand...
Click to collapse
sure you dont have a desire?
Yes I do I have a Model HTC Desire A8181. It still says HTC HD2, but it says Desire on the phone data screen.
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Will SW upgrade lock my unlocked HD2 to T-Mobile??
Hi
My HD2 from Tmobile is unlocked & am using it in India.
It has SOFTWARE: OS :5.2.21889 (21889.5.0.87), Manila version:2.5.20121412.1
ROM Version :2.10.531.1 (82076) WWE
I am planning to upgrade the ROM to 3.14.531.1.
I read at forum that Post upgrade, my HD2 will default to factory settings. Does it mean that my phone will again be locked to T-mobile?
Pl confirm asap as I don't want a locked phone
Thanks...
no it will never be re locked again, no matter what you do.
Ahh but which one????
samsamuel said:
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Click to expand...
Click to collapse
Ok dude this makes a lot of sense, but which one should I download? Are those version numbers or radio IDs? I don't want to brick my HD2.
Thanks for any help you may give.
those are rom version numbers. go for either 2.10.0 (not .1) or 2.13, or either of the 3.14
dude u have 2 download zune center if u got the wp7 rom thats how u sync the phone
Yes there is a way go to htcpedia.com register with them make your ocunt..and download htc hd2 stuck rom..then put your phone and bootlouder mode..and put the stuck rom you just download..makesure your phone is conecte it at least 50 % of batery no sim car no sd car.
Good luck bro..
sent it from htc hd2 android nexus one custom rom
I have a problem with my device and around the web I can not find much support for it.
Please help me. I have an HTC HD7 t-mobile and I want to update it to NoDo European version. How can I do?
thank you
can someone help me?
up help me please =)
filoman said:
up help me please =)
Click to expand...
Click to collapse
What help do you want??
just install zune sofware on your pc, plug in your mobile phone ,ones your phone is detected. it will take you tru the update and installation.
thats how i got mine, london.
NoDo update
download and run and zune software on you pc, connect your hd7 phone to your pc once the system dictates your phone, it will take you tru the update and installation process. thats how i did mine in london t-mobile....
Guys, I think he has a US T-mobile HD7 and he wants the Euro ROM on it instead of the US one that the Zune might be detecting as soon as he plugs it in.
The only advice I can ask you to try is to first rollback to your previous restore point that Zune allows, and then use the process to debramd the device, via one of the threads in the stickies. Then download the Euro ROM of your choice and flash it via the bootloader mode.
The easiest way is, get a Euro device and sell this. LOL.
Sent from my HD7 using XDA Windows Phone 7 App
Head over to the HD7 Development section. Follow the instruction for unbranding your phone. Once you have the unbranded ROM flashed you can push through the unbranded NoDo ROM.
Beware though, M$ has put out some notices about "jailbroken" devices and their ability to update in the future. Not saying its going to affect anything, just always good to read before jumping in. The more you know...
thanks for the replies, my problem is that I don't also know how unbranding my phone. I only know that my CV is 531.
can you link me please?