first, dont forget to give a thanks to nims11, because of him, i can publish this kernel
this kernel MAYBE only work for [ROM]Gingercruzt V2(sonygen)[Update8/11/2011]
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (883Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?05d2zri7b8a7pye <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 806 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
Download for app ( No-frills, antutu power saver, MIUIcamera, WiredTether )
">>>> www.mediafire.com/?3ne3v721u0d08wi <<<<<"
install Manually
Feature added into kernel :
1. ext4 filesystem as default ( support ext2 and ext3 too )
2. SIO, VR, NOOP, BFQ, CFQ, DEADLINE scheduler, SIO as default ( choose with no-Frillis )
3. 17 Governors ( see POLL ABOVE ) ( choose with no-Frillis )
4. Overclock upto 883Mhz
for reference about Governor and I/O scheduler
thanks to knzo
this kernel base on cm-kernel
CyanogenMod
for Overclock reference
burstlam
If you try on other rom, just please report if work
i will update feature if i can
FOR GALAXY ACE GT-S5830B ( Brazillian User ) Thanks to traduz
go to this post
OC kernel for GT-S5830B ( Brazillian User )
It will work with all cm7 roms for ace
nims11 said:
It will work with all cm7 roms for ace
Click to expand...
Click to collapse
Thanks buddy,
works for me using grif's cm, thanks people
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
^Deadly_Sin^ said:
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
Click to expand...
Click to collapse
if get unstable , please set max 806 Mhz again, enjoy
Click to expand...
Click to collapse
...................................
EmoBoiix3 said:
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I dont understand what are you talking about ??
sorry for my english
denzel09 said:
...................................
Click to expand...
Click to collapse
Yeah i know, i just posted my personal experience. works ok for me at 844 without any problems. thanks anyway for taking time to reply
Too cool for school!
Sent from my GT-S5830 using XDA App
Using gingercruzt v2 without latest update @883 stable for now viewing youtube videos, angry birds, camera working... dont ask about governors, they are to many now loool...
Good work
Edit: First reboot 30 min after flashing kernel
ti is a stable version???
---------- Post added at 08:53 PM ---------- Previous post was at 08:49 PM ----------
<witch is the best governor for powersave and for performence
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
downloadonlyaccount said:
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
Click to expand...
Click to collapse
please read link on the page one, from knzo
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
No, thats bug came from cm7 rom, not the kernel
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
Good choice not implement this, for all that use oc kernel.
In this way to boot phone should use always basic default frequencies, so avoiding fake boot ;-)
---------- Post added at 08:53 PM ---------- Previous post was at 08:43 PM ----------
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
I dont think that overVolt is possible..
squadzone said:
No, thats bug came from cm7 rom, not the kernel
Click to expand...
Click to collapse
the problem is from the kernel dude,I'm running gingercruzt V2 on ketut's kernel everyting is fine on yours dosn't show min/max frequency in performence settings
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
Can you build the kernel??
i read many reference what the best max freq for kernel, and the 883Mhz, is enough for hardware,
so this kernel not just compile, but i read every log when build this kernel and try to fix, to minimize error mod post
if you dont like, dont use it, i just want to share, what i'm doing, and if you like, just give a thanks
maybe i can give a clue, just read below
see this code
Code:
/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
enum {
VDD_0 = 0,
VDD_1 = 1,
VDD_2 = 2,
VDD_3 = 3,
VDD_4 = 3,
VDD_5 = 3,
VDD_6 = 3,
VDD_7 = 7,
VDD_END
};
max freq use code 7, its mean corresponds to 1.325V ( max volt )
go, and build your self,
if you know the bug,
please report, not complain
every device with same type is not same on hardware, some people can boot at 883Mhz, but some people cant, and my kernel freq 883Mhz, but not default, all people will know, if freq is bigger than default its mean OC kernel
all feature is not just add but with some modification that need by device for get best result
sorry for my english
Related
------------- ANDRO-ID OC KERNEL -----------------------------
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?ji1gotry7jia3yh <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (801Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?jj12ups72r8xpyp <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (868Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?e7yhpc5jnokb7ai <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 18 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV/GPU module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 18 feature and UV/GPU module
"> http://www.mediafire.com/?61vx9id6kih66a2 <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
and btw thanks very useful
Which kernel should I use ??
wow, thanks for the update!
Junnie said:
Which kernel should I use ??
Click to expand...
Click to collapse
What you want
Thanks mas bro
is this kernel for stock rom? if not, what rom?
GizmoTheGreen said:
is this kernel for stock rom? if not, what rom?
Click to expand...
Click to collapse
Andro-id
Sent from my GT-S5570 using Tapatalk
Update Link OC kernel
I want to use this but i really am a n00b here, i dont understand half of the instructions up there, can someone please help me..i want to use 763 for my galaxy mini running with andro-id 3.2
EDIT: nevermind, already installed OC kernel
annson08 said:
I want to use this but i really am a n00b here, i dont understand half of the instructions up there, can someone please help me..i want to use 763 for my galaxy mini running with andro-id 3.2
Click to expand...
Click to collapse
annson08 said:
I want to use this but i really am a n00b here, i dont understand half of the instructions up there, can someone please help me..i want to use 763 for my galaxy mini running with andro-id 3.2
Click to expand...
Click to collapse
1. Download one OC kernel from above (in your case 763 Mhz).
2. Copy it to the (root directory) of your sdcard.
3. Go to recovery mode (Press Home + Power button).
4. select Install zip from sdcard
5. select Choose Zip from sdcard
6 Select (with Home button) the file which you copied earlier to your sdcard.
7. Wait till it finishes flashing/installing.
8. Reboot you device when everything is done.
Read this article to be more clear about it... http://yagyagaire.blogspot.com/2011/12/how-to-overclock-samsung-galaxy-minipop.html
Can i use this OC kernel for CM7 RC3..
badung81 said:
Can i use this OC kernel for CM7 RC3..
Click to expand...
Click to collapse
No
-------------------------
SO wich one, OC kernel for cm 7 rc3 smartboot up to 782mhz.
badung81 said:
SO wich one, OC kernel for cm 7 rc3 smartboot up to 782mhz.
Click to expand...
Click to collapse
Try the one from here http://yagyagaire.blogspot.com/2011/11/how-to-overclock-latest-cyanogen-mod-7.html
Thanks mastah yanuar harry! Very useful masbro!
Sent from my GT-S5570 using xda premium
Do you have 9xx mhz kernel?
Best kernel from Squadzone, thanks. 763 mhz to replace originale boot img...
Work perfect...
Sent from my GT-S5570
What is the different between the first one and the last?
Sent from my GT-S5570 [andro-id v3.2] using XDA premium
I have no idea..but i an currently using the 1st one
Sent from my GT-S5570 using xda premium
How can i overclock my rom?? please help me..
I am currently having this setting
..
please help me! :\
CURRENT SETTING: 600mhz
WANTED SETTING: 800mhz..
Can you please give me links and steps and requirements on what i will do..
if u want to overclock, flash custom kernel or custom rom that has kernel overclock feature.
search on dev section.
sent from my Walkman
derekgabs said:
How can i overclock my rom?? please help me..
I am currently having this setting
..
please help me! :\
CURRENT SETTING: 600mhz
WANTED SETTING: 800mhz..
Can you please give me links and steps and requirements on what i will do..
Click to expand...
Click to collapse
This ROM and it's kernel has OC already since it is based on CM7 by mebitek, look for Cyanogenmod settings, Performance, CPU settings, and set your max freq to your preferred freq under its options.. note that values are preset, you cannot choose 800, 806 is the preset one.. also, not all minis are stable at OCing above 800.. so, if your phone reboots itself at 806, set it to a lower value, 787 or 752..
chepoz said:
if u want to overclock, flash custom kernel or custom rom that has kernel overclock feature.
search on dev section.
sent from my Walkman
Click to expand...
Click to collapse
Uhm.. can you please direct me to one of that threads.. and can you also please give steps? Uhm.. totally pardon me from my ignorance.. im still a newbie in overclock and kernels.
kitrax59 said:
This ROM and it's kernel has OC already since it is based on CM7 by mebitek, look for Cyanogenmod settings, Performance, CPU settings, and set your max freq to your preferred freq under its options.. note that values are preset, you cannot choose 800, 806 is the preset one.. also, not all minis are stable at OCing above 800.. so, if your phone reboots itself at 806, set it to a lower value, 787 or 752..
Click to expand...
Click to collapse
ahh.. hehehe.. .. what would be the best and stable frequency of its maximum and minimum? .
BTW: thanks for the whereabouts of the frequency settings kitrax.. i really didn't know that my rom has this one.. .. THANK YOU..
derekgabs said:
ahh.. hehehe.. .. what would be the best and stable frequency of its maximum and minimum? .
BTW: thanks for the whereabouts of the frequency settings kitrax.. i really didn't know that my rom has this one.. .. THANK YOU..
Click to expand...
Click to collapse
no problem.. just play more with the ROM, as what others say. hehe anyway, mebitek's build is speedy already even at default freq.. 710 is enough for me.. min of 245 or 122.. mine is stable at 787 max only.. higher freqs than 787, it reboots itself. Could be different on yours.. just remember, OCing too high will also cause faster battery drain..
ok.. thank you kitrax.. i'll try to play more with the frequency now that i understand what it is.. hehehe .. thank you..
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Styrke said:
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Click to expand...
Click to collapse
I installed it...its very slow....I changed the governor and I/o then it worked....bt its booting too slow and boot animation is also very slow.....
Re: [Kernel] Overclocked (Need testers)
Great work !!!!!!!!!!!
Now we have a kernel with overclock function..
I will try this later......
sent from my gt-s5830i using xda premium
Styrke said:
Hey guys
This is my first try in making kernels it's Rafael Baugis/Bieltv3 kernel with overclock (Hope its a real one)
I also used Merruk-Kernel source to help in modifying.
Well the kernel has 7 frequencies 156MHZ 312MHZ 416MHZ 624MHZ 832MHZ 936MHZ 1.248GHZ and ext4/rfs support (Not sure if it mounts both FS at the same time but ti has to)
If you get lags with high frequencies change governor / IO
How to install :
Open Odin, put it in PDA section and flash
Credits:
Rafael Baugis/Bieltv3
Maroc-OS
Click to expand...
Click to collapse
according to the no frills stats both the frequencies are working fine....
on 936 mhz and governor smartass v2.+ cfq(io).i have a stable stock rom..but battery drains quiet fast..i think the higher frequencies are not undervolted.thanks for the kernel..it would be better if cm support is added..i have found many tutorials for app building..but never found some for kernel building..can u help me with some online stuff.??
edit:-headphones donot work with stock rom..music only work with speakers.
Hmmm . . . 1.248GHZ Frequency? . . . I hope this freq. will dont burn out our phones? . . . i think overclock over 1 GHz it's only for phone suiciders xD btw good work :good: i'll try this kernel later i have a suggesstion . . . can you add OC 1.024 GHz?
Re: [Kernel] Overclocked (Need testers)
Alucard1989pl said:
Hmmm . . . 1.248GHZ Frequency? . . . I hope this freq. will dont burn out our phones? . . . i think overclock over 1 GHz it's only for phone suiciders xD btw good work :good: i'll try this kernel later i have a suggesstion . . . can you add OC 1.024 GHz?
Click to expand...
Click to collapse
I think your right 1.2 ghz not good for our phones
1 ghz is good for our phones.....
sent from my gt-s5830i using xda premium
Re: [Kernel] Overclocked (Need testers)
They should remove 1.2GHz overclock
Otherwise many noobs will blame u if the burn thier processor and ask u for money
Sent from my GT-S5830i using xda premium
Re: [Kernel] Overclocked (Need testers)
First of all let us confirm that...the overclock is really working or not.
Sent from GT S5830i from Broadcom Headquarters.
Odp: [Kernel] Overclocked (Need testers)
Downloading on my ace...
Sent from my X10Mini using xda app-developers app
Re: [Kernel] Overclocked (Need testers)
I dont think overclock is true....its just false values of lower frequency like 936mhz is 624mhz and 1.24ghz is 832mhz.....it is just a placebo effect......many advanced devs in galaxy y thread have tried to overclock our cpu but the result is non prodictive.....i think we need views of senior dev on this matter......
Odp: [Kernel] Overclocked (Need testers)
Do I need to flash Rafael's modules?
Sent from my GT-S5830i using xda app-developers app
-HellRaiser- said:
I dont think overclock is true....its just false values of lower frequency like 936mhz is 624mhz and 1.24ghz is 832mhz.....it is just a placebo effect......many advanced devs in galaxy y thread have tried to overclock our cpu but the result is non prodictive.....i think we need views of senior dev on this matter......
Click to expand...
Click to collapse
If it works on merruk kernel it has to work on this one too.No?
daxanh said:
Do I need to flash Rafael's modules?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
No you don't need em to change frequencies.
Re: [Kernel] Overclocked (Need testers)
Styrke said:
If it works on merruk kernel it has to work on this one too.No?
No you don't need em to change frequencies.
Click to expand...
Click to collapse
Thats what i am trying to say.....merruk tried to overclock and at first thought that it worked but further examination showed it doesnt work and merruk then confirmed that overclock didnt work....its just a placebo effect....why dont you search his thread in galaxy y forum......same thing happend with rafauel's kernel......you can even contact hell_lock regarding this,he will tell you more about this technically......
So for now i still believe overclock is not true for our device at present.....
-HellRaiser- said:
Thats what i am trying to say.....merruk tried to overclock and at first thought that it worked but further examination showed it doesnt work and merruk then confirmed that overclock didnt work....its just a placebo effect....why dont you search his thread in galaxy y forum......same thing happend with rafauel's kernel......you can even contact hell_lock regarding this,he will tell you more about this technically......
So for now i still believe overclock is not true for our device at present.....
Click to expand...
Click to collapse
Yes it's true I just installed SetCPU and none of the frequencies 416 936 1248 are shown.I tried adding 1500 and the is stable because its always running on 832mhz.
But I didn't understand why 416mhz didn't work did I messed sth ?
hi everyone
to my knowledge, the frequencies are selected by register, According to what we said at the time Rafael in his forum.
The only possibility was to examine some new devices with the chip bcm21553 having frequencies above 1Ghz
Not answer how i know that, i only readed in the rafael kernel section
have a nice day :victory:
overclock function not working
sursha007 said:
overclock function not working
Click to expand...
Click to collapse
Yes dude we can read the title too.
sursha007 said:
overclock function not working
Click to expand...
Click to collapse
Damn! My eyes! I can't see anything now >.< . . .
well im back to izs again i tried to search but search is unavailable now.. this time i need any recommendation for best performance /smoothness / battery life ( balanced ) since im newbie for all kinds of kernels and governors stuff
thank you
Mo Chedid said:
well im back to izs again i tried to search but search is unavailable now.. this time i need any recommendation for best performance /smoothness / battery life ( balanced ) since im newbie for all kinds of kernels and governors stuff
thank you
Click to expand...
Click to collapse
I`m using Lionheart as governor / ROW as scheduler , its the best thing i found for performance / smoothness / battery life
With medium use , wifi on almost all the time , after 24 hours i have 30% battery left.
With wifi off i get 2% drain during 8 hours overnight.
Olynth said:
I`m using Lionheart as governor / ROW as scheduler , its the best thing i found for performance / smoothness / battery life
With medium use , wifi on almost all the time , after 24 hours i have 30% battery left.
With wifi off i get 2% drain during 8 hours overnight.
Click to expand...
Click to collapse
what about min and max freq? and ill change values from No-frills cpu right?
Mo Chedid said:
what about min and max freq? and ill change values from No-frills cpu right?
Click to expand...
Click to collapse
Mine are max. 1000 mhz , min 300 mhz
Yes you can change them from No Frills cpu
i tried it but didnt really notice any change in performance and also SD unmounts..i heared about diana kernel..but i dont know how to flash or install
anyone?
EDIT:
ok i managed to flash from cwm menu but i have 2 rar files v 0.2 .rar and v 2.7 max uv.rar..which is better??
Mo Chedid said:
i tried it but didnt really notice any change in performance and also SD unmounts..i heared about diana kernel..but i dont know how to flash or install
anyone?
EDIT:
ok i managed to flash from cwm menu but i have 2 rar files v 0.2 .rar and v 2.7 max uv.rar..which is better??
Click to expand...
Click to collapse
if you are on IZS by Huexxx, flash kernel Diana v0.2 from IZS v0.2 - url blog => http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
copy on sdcard, reboot in recovery, flash kernel diana v0.2.zip with CWM, wait, reboot.
with nofrills, set smartass2 / row for battery life.
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
YkZ_1967 said:
if you are on IZS by Huexxx, flash kernel Diana v0.2 from IZS v0.2 […] set smartass2 / row
Click to expand...
Click to collapse
Vaiet said:
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
Click to expand...
Click to collapse
Both are very good governors for IZS but not all kernels have both and be very carful not all governors are the same in all kernels.
Sent from my LG-P970 using xda app-developers app
Vaiet said:
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
Click to expand...
Click to collapse
+1
Hi everyone
I was wondering what is the best cpu and i/o combo
I am currently on Cyanogenmod 10.1 RC4 by bieltv.3
Max Cpu - 902 Mhz
Min Cpu - 245 Mhz
Governor - Smartass V2
I/O - Deadline
Any opinion guys???
Cyber_Dragon001 said:
Hi everyone
I was wondering what is the best cpu and i/o combo
I am currently on Cyanogenmod 10.1 RC4 by bieltv.3
Max Cpu - 902 Mhz
Min Cpu - 245 Mhz
Governor - Smartass V2
I/O - Deadline
Any opinion guys???
Click to expand...
Click to collapse
Overclocking can fry your cpu. My governor is smartassH3, frequency 245-800 MHz and I/O is sio. for SmartassH3, flash MA6 kernel by @Mardon. Btw just curious, why are you using an old version of cm10.1? there is a final version for cm10.1. here- http://jenkins.androidarmv6.org/job/android/602/
-BRK- said:
Overclocking can fry your cpu. My governor is smartassH3, frequency 245-800 MHz and I/O is sio. for SmartassH3, flash MA6 kernel by @Mardon. Btw just curious, why are you using an old version of cm10.1? there is a final version for cm10.1. here- http://jenkins.androidarmv6.org/job/android/602/
Click to expand...
Click to collapse
Thanks for your reply -BRK-, but im comfortable with 902mhz
I'm also confused whether i'll use sio or deadline I/O
Cyber_Dragon001 said:
Thanks for your reply -BRK-, but im comfortable with 902mhz
I'm also confused whether i'll use sio or deadline I/O
Click to expand...
Click to collapse
understanding them might help you decide. have a look-
http://forum.xda-developers.com/showthread.php?t=1558153
http://forum.xda-developers.com/showpost.php?p=15735266&postcount=2
-BRK- said:
understanding them might help you decide. have a look-
http://forum.xda-developers.com/showthread.php?t=1558153
http://forum.xda-developers.com/showpost.php?p=15735266&postcount=2
Click to expand...
Click to collapse
Ohhh... srry for being noob and all. It kept on rebooting after i set the clock to 902mhz
so i stick to your advice
Max-800mhz
Min-245mhz
Gov.-SmartassV2
I/O-sio