I have a Samsung Galaxy Tablet 7" (Verizon) using wifi only. I was updating the OS and ended up with a picture of a phone then a triangle with "!" then a computer icon. the tablet wont communicate with the computer and wont do a reset with the power and volume button. Can anyone give me a step by step assistance. This was the first time I used ODIN. I had no issues prior to this. Now the battery wont take a charge either.
I think the symbol means kernel failure.
PLEASE HELP!!
Have had that display for me too during a rom upgrade. Fixed it by just downloading the Overcome files from the page below and run through to the first part where it installs the Stock gingerbread rom, where it states "Once it’s done booting up, you should get your Tab in a new, factory-fresh JQ1 Gingerbread", unless you wish to go all out and do the Overcome one completely, which is a great rom by the way.
p1000.teamovercome.net/?page_id=64
Cheers
Paul
How did you get the tab to connect to your computer again..because it doesn't recognize mine when in this stage and the battery wont charge after this incident
Amigo la solucion solo es cargar el fille .PIT de La ROOM correcta de tu modelo de galaxy con el ODIN.... a mi me sucedio y de esa manera pude salir de ese error..
do you know where I can find the PIT file for a samsung galaxy tab 7 inch Model SCH-1800 and how to do it step by step with ODIN? Also what about the connection to the computer that is not connecting or maintaining a battery charge because of this error.
It might not help you, but when I had this problem and Odin failed, I tried flashing fresh kernel, PIT and ROM images to the Tab using Heimdall. It even has a dedicated button to remove the computer-triangle-phone screen and theoretically return you to the standard Download mode.
I know
Had this problem to, don't worry it's just like a soft brick, and can easilly be recovered using a stock samsung firmware
I've used Odin to flash back.
Had the problem where odin dosen't detect the tab, just ignore that and flash the firmware as you would normally do.
Is there any guide to solve this issue? Because everybody say something, but I can't put them together.
First I will write my case:
-- I was trying to install cynogenmod, the first thing I do is pressing 'home+volDown+power" buttons. Then I saw a downloading screen, I waited here for 1-2 hours, nothing changed. Then dummy me decided to restart the device, when I do so I saw the screen exactly the same with @evenground attached.
-- I opened the case and removed the battery then replaced it. Nothing changed.
Things that I don't understand:
** How can I do something with my PC while my PC do not recognize the device via USB?
** Is my tab be able to charge? Because when I try to charge (not with PC, normal way), the screen that I mentioned is on for 2-3 sec then off for 2-3 sec. (flashing)
** Is its name "Hard Brick" or "Soft Brick"?
** How to use odin or heimdall in that situation?
I really stuck and dont know what to do. :/
As Erkanger stated above again HOW DO I USE ODIN if my computer and re-flash original firmware if my computer doesn't recognize the device and doesn't hold charge..can someone give the step by step and download locations for which ODIN and FIRMWARE to use PLEASE!!!
pgp66 said:
Have had that display for me too during a rom upgrade. Fixed it by just downloading the Overcome files from the page below and run through to the first part where it installs the Stock gingerbread rom, where it states "Once it’s done booting up, you should get your Tab in a new, factory-fresh JQ1 Gingerbread", unless you wish to go all out and do the Overcome one completely, which is a great rom by the way.
p1000.teamovercome.net/?page_id=64
Cheers
Paul
Click to expand...
Click to collapse
this is the download mode ...just flash other rom and will work. this happen to me today .
site you posted doesnt work I get "Error establishing a database connection"
Related
I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!
Please HELP!
EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.
I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.
EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.
I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...
Up?
What can i do? Is a batterie problem?
Let your Tab charging for 5 Hours and then try again.
Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "
HELP please? Can i do a custom jig for the galaxy tab? And How?
press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min
suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.
Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead
Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App
Hello, I own a galaxy tab 7" latin american version for a couple months, everything was running good, stock rom/rooted.
2 weeks ago it stopped reading any sim card, I tried to fix that problem by going back to unrooted with superoneclick, and I ended up fudging everything instead.
The problem is:
Im stuck at the "(Phone)....!...(PC)" screen, and it's blinking, I've already downloaded ODIN tool and Heimdall's Oneclick Unbrick tool.
This is the screen I'm getting
Which none of those I've succeded unbricking the tab.
Please help me, what can I do?
Please help!
Try using odin, to flash this rom
P1000N: http://www.multiupload.com/EUZS7V21L6.
P1000L: http://www.multiupload.com/SZZZFK8GMO
PIT file: http://www.multiupload.com/ZL9HDOGI5V
Repartition checked.
After flashing the correct rom enter to download mode again and flash this http://www.multiupload.com/E0CQPPZCMN in odin without pit file and repartition unchecked, do a wipe cache and dalvik. then restart to system.
I softbricked my tab some couple times and this metod always works for me. (P1000N)
Thanks for the stock rom Rafa, the thing is, ODIN doesnt recognize the tab, when I plug it to the wall charger, it turns on the brick screen, and it is blinking.
Thats the part that really worries me, the blinking part...
When I plug again the tab to the computer, it doesnt turn on the same screen
EdWRX said:
Thanks for the stock rom Rafa, the thing is, ODIN doesnt recognize the tab, when I plug it to the wall charger, it turns on the brick screen, and it is blinking.
Thats the part that really worries me, the blinking part...
When I plug again the tab to the computer, it doesnt turn on the same screen
Click to expand...
Click to collapse
I've once had my tab was showing a error triangle with connection problem from tab to pc -so i've thought "rigth just gonna flash it like i've done so many times".
When i've connected the tab to my pc odin didn't recognise it either. Though i've just selected my pit tar and so on and flashed it anyway, that little blue bar showed up on the tablets screen, and then it was flashing.
Try see if you're able to pull of the same.
Cheers, jakk212
But the COM port did recognize the tab??
Hello,
I have the same problem... did you find already a solution?
Thanks!
rafaeker19 said:
Try using odin, to flash this rom
After flashing the correct rom enter to download mode again and flash this in odin without pit file and repartition unchecked, do a wipe cache and dalvik. then restart to system.
I softbricked my tab some couple times and this metod always works for me. (P1000N)
Click to expand...
Click to collapse
thank you i had the same problem with my tab from claro el salvador and now is working!
anyone else has any input on this?
1-Does Windows detect the tab?, check in hardware manager, see if listed.
2-try flashing using Odin or heimdall, make sure you use the correct version of Odin , I use the 1.7 and I don't have problems.
3-if Odin detect it do the steps above.
Sent from my GT-P1000 using XDA App
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
sourabh12 said:
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
Click to expand...
Click to collapse
i guess your gonna download a firmware on 2.2.1 and flash it..........but i recommend 2.3.3 firmware..try it on mine the ......!....... but still odin detects it......2.2.1 is old try AOKP for are tab....best rom
First, which tab is yours.
Edit: from your pm you indicate P1000.
OK, I sounds luke a broken record now but here goes.
Have you had a look at overcome method.
You need to flash GB-stock-safe-v5.
Sometimes even when screen is blank, it can still be a download mode.
So, be sure that it is charged (using original wall charger).
Then ready Odin and the files in proper places and pre connect the tab to PC.
Then boot to download mode and quickly flash using Odin.
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
After it is revived, you may want to continue.
If so.
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app
Read my post at the bottom of this thread:
http://forum.xda-developers.com/showthread.php?t=1826324
I had the same issue but I've now sorted it.
tab working again!!
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
What about a Tab P1000N? What can be done with that one?
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
priyana said:
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
Click to expand...
Click to collapse
Thanks, it did work for me.
You saved my world
sourabh12 said:
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
Click to expand...
Click to collapse
I looked every where for 24 hours and then I ran across your post simply......now I and anyone else that has this problem knows to let the tablet charge on the computer our laptop for 20 mind and then the bricked download screen will appear and your good to go you post was very helpful maybe the only real method out there thanks a million:angel::good:
I apologize, because I don't know much about this kind of stuff. And I don't mean to post this in the wrong place, but, I have an issue and i have been looking around for a few hours for a solution, but I haven't found anything that really even describes what my problem is.
I was trying to root my Samsung Galaxy Tab 3, SM-T2109, I set it into Download mode, and opened up Odin. I had Auto Reboot and F. Reset time checked. I checked the PDA box and loaded a ROM called "prerooted.tar.md5". I then clicked start and waited for it to work. Odin reported no errors and my tablet rebooted, the samsung galaxy tab 3 logo looked completely normal. But as soon as it reached the screen with the animation, before the tablet boots up, i knew something was wrong, because the animation never came up, only the booting up noise. Then, when the tablet was supposed to be started up, it never displayed anything on the screen. In order to get it to work I push the lock button once, then the screen shuts off, then i push it again and the display comes up. When i do this, i notice that the screen flashes, notably especially on blue colors, between random colors. Constantly flickering. The touch screen works fine, and everything else seems to be completely normal. I fiddled around with the settings for a bit and decided i wanted to try to factory reset.
I shut down the tablet and did a factory reset, but that didn't work. Still the same thing, I researched some more and found a video that said to flash something using odin, that would apparantly unroot the device. I tried this, the thing is called "KIES_HOME_T210RUEAMG4_T210RXACAMG4_1304745_REV00_user_low_ship.tar" I did it, and once again, when i booted up the device it did the same exact thing.
I do not believe that there is anything physically wrong with the display, because when i set it to download mode, the screen returns to normal, and does not have this problem, but when i am in recovery mode, or using the regular tablet, it has this problem.
I'm wondering how i can fix this, because it is quite the annoyance, though the tablet is still theoretically useable, it's very very annoying to have to watch the screen flicker like this.
Im sorry if i left out any details, I didn't mean to. This is my first time doing this and i dont know much, if you need any more information i'd be happy to comply.
Thank you for taking the time to read this.
There seems to be no end of Tab 3 owners posting on Galaxy Tab 7" original forum.
Sent from my GT-N7100 using xda app-developers app
priyana said:
There seems to be no end of Tab 3 owners posting on Galaxy Tab 7" original forum.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Oh, I'm sorry. I'll post in the right spot
any fix yet? I tried installing the Blackhawk kernel 1.7 and 1.8 and I get an error. Also there is no rockettab kernel that I can find.
I managed to fix mine by installing the "RocketTab2.1_MOD_T210_MK9_Kernel.zip (original T210 MK9 RocketTab kernel, if you want to revert)" from the Rockettab thread after installing my custom ROM that I wanted to install.
i have the same proble with my galaxy can anybody help me out please??
rooted flickering screen problem
having same problem can any one help
Come on guys.
Go to
http://forum.xda-developers.com/galaxy-tab-3
And leave us to our tab 1 forum.
Sent from my GT-P1000 using xda app-developers app
solucion
cam105 said:
i have the same proble with my galaxy can anybody help me out please??
Click to expand...
Click to collapse
prueba la preroot es normal el parpadeo, falla el kernel toma el archivo rockettab 2.1 e instalalo por recovery
si sirve ya lo probe
SOLUCION
cam105 said:
i have the same proble with my galaxy can anybody help me out please??
Click to expand...
Click to collapse
HELLO, FOLLOW THESE STEPS
1. INSTALL prerooted.tar.md5 through ODIN. In this step it is normal for the screen to flicker.
Two. By Odin INSTALL RECOVERY, flash is normal to continue
3 DOWNLOAD the kernel "RocketTab2.1_MOD_T210_MK9_Kernel" en google input "RocketTab2.1_MOD_T210_MK9_Kernel.zip" select first link
select first link
4 install zip from the tab 3 recovery you installed in step 2
5 enjoy
HOLA, SIGUE LOS SIGUIENTES PASOS
1. INSTALA prerooted.tar.md5, mediante de ODIN. En este paso es normal que la pantalla que parpadean.
2. Mediante Odin INSTALL RECOVERY , es normal que siga parpadean
3 DESCARGAR el kernel "RocketTab2.1_MOD_T210_MK9_Kernel" desde google "RocketTab2.1_MOD_T210_MK9_Kernel.zip"
escoger primer link
4 instala el zip desde el recovery desde la tab 3 que instalaste en el paso 2
5 enjoy
Solution
I had the same problem, I fixed with these instructions: use SAMSUNG Kies, plug ur mobile cable to both the pc and your device, then the program tells you that a firmware is available to be downloaded into your device, download & Enjoy ::laugh:
can anyone help me out i want to root my tablet is a samsung galaxy tab 3 7.0 wifi model but whne ever a press the power and the volume up and home button the screen come with an androir laying down with a triangle and exclamation mark in it. it gives me different options like wipe and factory reset. i am usig odin to root it but the tablet does not appear so i dont know ho can a rooted can someone please help me out i will appreciated thank you