Hi,
I don't manage to install apps on my 7.10.7740 Leo HD2.
All the tips and tricks do not function.
Can this be an registry issue?
I read something in a post of sic.
Tried to contact him, but don't get a reply.
anybody else some idea?
(not activating, except cookies in IE, soft and/or hard reset aso.)
If it is an registry issue, could I get some instructions what to do?
Can you let me know which type of application you are trying to install. Is it a CAB file or a XAP File.
Related
I am trying to delete programs that I believe I don't need. I use WiFi and do not have T-Mobile Internet Plan. Would I create a problem if I delete the following:
DAT MailTrigger
OZ Communications OM IM
T-Mobile HotSpot Login Utility
Thank you!
Are these in your Remove Program list? If not, you may not able to 'uninstall' these nicely.
What I suggest is that you may want to have a look on your Ext ROM, get all the CABS file there. Use some CAB managers, to open each of them and see where they have places the files and delete them. If things goes wrong, you can always have it installed since you already know which CAB is responsible for which.
Or, if you can affort a hard reset, reset your device and do not allow the Ext ROM to be install (e.g. soft reset your device after the security setup). Then, go into your Ext ROM and install the CAB files one by one, to identify the CAB files that you do/do-not want to install. This will give you a clean installation.
hanmin said:
Are these in your Remove Program list? If not, you may not able to 'uninstall' these nicely.
Ys, these are in my Remove Program list. They are loaded apps/software that is part of the T-Mobile total package. I did not load these using a CAB file. I guess I will just take a chance and remove them and see what happens. Like you said below I can do a Hard Rest if I need to. Thanks for your input. I do appreciate it.
TonynMI
Click to expand...
Click to collapse
I remove those apps if I remember too and since I've never had a need for their functionality, I've never had a problem because of uninstalling them. All you really gain, however, is a tiny bit of memory...which is probably why I usually don't remember to remove them.
Just completed removing the following:
Memory Available Before/After Removal: (Saved
DAT MailTrigger 3450/3624 (174)
OZ Communications OM IM 3624/3629 (5)
T-Mobile HotSpot Login Utility 3629/4052 (423)
Restart after removal and no problems.
Thanks for your responses.
I tried to install dutythroy_black-3g-comm-manager_.cab.fixed and I install it to the SC card. However when I tried to remove that software the Kaiser said that it was no able to remove it and do you want that it been removed from programs list...
Now my comm manager is corrupted and it shows only one choice in the upper left corner.
I already tried to run restorecom.reg but it didn't help. Any way to run original comm manager cab installation or do something else which helps me...
Also... I tried some other Latest cabs like task manager & windows live and both of these says that it hase been mentioned older windows mobile device?? Is this only warning not to be worried or did I something wrong?
Gotta raise this because I have a problem...
Plz... anybody could help me?
Anybody could make a copy what are original registry settings of Comm Manager... if that would help...
PeeHoo, why would you install a core function like the Comm Manager to the SD Card? That's asking for problems like you now have. Do a hard reset and try again.
Thx for wise answer!!
I did so!! But after I uninstall this dutythrow 3g comm manager. if you read my question more carefully you can read what I wrote... However there was mistake of written english (SC was mentioned SD) and word install should be I installed....
This hard reset answer is really nice... anybody really can help? I do know that HR help but I am trying to avoid that...
Unless you can write a cab, or bribe someone into doing, to reinstall the original skin, which I'm sure you copied before replacing right?, you're screwed.
This is where SPB Back up really helps!
You may not like the answers you get, but most of the people here won't lead you astray. Easiest way is to HR. You can try backing up now with SPB & then hard reset. The customazation cabs should replace & stick.
i ccan't figure this out does anyone can tell me the procedure?
were to download and how to install??
Do a search. on either google or on this forum before asking plz.
This question has been answerd before.
But sins there was no thread that was acualy called like your question ill post the answer and maby next time when someone search they will defenetly find the answer
Go to the link below and download the program and install it on your computer.
When its done it will install it on your phone aswell. (so keep it connectded to the computer while you install it)
http://www.microsoft.com/downloads/d...displaylang=en
Go here
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
If you read the instructions, it will tell u.
This package uses ActiveSync 4.0 to update the device. Before running NETCFSetupv35.msi, connect your device to your PC. If your device is not connected, ActiveSync will store the CAB file and will not install the package until you connect. If you are not using ActiveSync, run the CAB files on the device that correspond to the device–specific CAB files found in the install folder.
For now, it's not possible to download directly the cab file from MS site
google for the following files:
- NETCFv35.wm.armv4i.cab
- netcfcfg.cab (saves yourself from editing registry)
You will identify trust-worthy locations easy
Easier than you can imagine.
Search MODACO forum ( www.modaco.com ) NETCFCFG.cab and NETCFv35.vm.armv4i.cab
Install both and you will have a simple application in program menu to choose between net 2.0 and 3.5. DONE
You can also choose to use 2.0 for some applications and 3.5 for other
thnks y´all i found it on modaco, got it worked!!
pls help, I can't install it
it writes: "installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
I cant even uninstall it, and I get this msg always
"installation error. stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution: I kill Kaiser Notification and then I can install .NET Framework without this problem. This app. using .NET Framework.
So I think the solution is in closing/killing all running applications.
What is the "kaiser notification"?
I have the same install error.
Thank you.
i have the same installation error as the last two posters. i tried killing every program i can and i still get the error
me too !......still can not install netcf v3.5 !!
After 2 days searching high & low through internet all discussion session, still can not find a solution. Therefore I made a self tracing and tried all kinds of method, at last I found a solution without doing a hard reset !!
rename mscoree.dll under windows\ to mscoree.dll.txt
re-install netcf v3.5
no more any error code comes up
thats it !!
I am running a tytn II, with the same problem. Install, i get the error. I can't uninstall, atleast not when I try through the 3.5 installer (remove or repair) or the "remove programs" on the kaiser.
I have hard reset the phone 2x,and regardless of whether I am installing from the exe or the cab file on the phone, still get the same error as everyone else.
This past time, i tried changing the name of the mscoree.dll under windows\ to mscoree.dll.txt and mscoree35.dll to mscoree35.dll.txt
same problem. I'm really beyond annoyed. Can someone help?
have a sprint diamond, how do i check which version i have and if its the newest?
it seems like all the programs i try and install say it requires a newer version than the one installed on the device but its only a month old so im not sure.. any help would be great..
thanks!!
I have the same question. I've searched all over and can't find an explanation of what .Net 3.5 is or how to find out if I have it already. I have a Sprint (CDMA) HTC Touch Diamond. Thanks.
I had the same problem on my HTC Kaiser, but I found a solution.
I found a program that acts like safe mode on a computer.
So if you install that program and restart in safe mode (you need to select safe mode when you boot), you will be able to install the compact framework 3.5.
Probable some locked files prevent the normal installation.
The program is an evaluation version, limited to 14 days, but since you only need it for the framework, you don't need to keep if you don't want to.
The app: SafeMode 3
...still not working on my touch diamond.
i've renamed the dll and tried the safe mode app. But I still get the same error.
btw: i have this problem since i installed a cooked rom.
Thanks. Was also having the install issue (I had previously installed and then removed 3.5 but good old ms clearly didn't remove correctly).
Renaming mscoree.dll worked (I tried mscoree2.5.dll before but that didn't work as it was in use so I couldn't rename that).
Glad it worked, was facing dropping back to previous backups or installing a task manager to kill processes (a good task manager program will show all your processes), just to reinstall 3.5.
another thing that goes wrong with the 6.5 wm and tf3d installed:
when you go to the movies, and you put your phone into vibrate, with the left volume keys, the phone goes into vibrate fine,
but when you set it back to full volume, the next time someone calls, it only vibrates, you have to go to: Settings, Sound and change the ringtone manualy to make it ring again...
Sorry, Wrong Forum...
Hi, I've read through quite a few pages but have no luck finding anyone resolving this issue. It's probably a fairly simple fix but I havn't figured it out yet.
Everytime I install an app through .cab file and choose to install it in my 4gb "external storage" it will not run properly. Everything installs perfectly fine but when I try to run it, it tells me something about not certified or some sort. I can't give the exact wording that WinMo said because I'm running chinese version. If anyone has a fix to this it is much appreciated. Thanks.
Search for sdkcert.cab and install it
MarcLandis said:
Search for sdkcert.cab and install it
Click to expand...
Click to collapse
Hi, I've installed the sdkcert.cab but it still does not work... What do I do now?
bump
so can someone on the forum tell me what I need to do for programs running off my 4gb to work? it seems everything I install on the 4gb will show up saying a trusted cert is missing or one of the file is missing. I'm pretty sure one of you guys out there already figured out how to fix this. Thanks in advance.
P.S.- I already installed the sdkcert.cab but it didn't do me anything or I don't know how to set it up.
Hi, I've found out the exact problem but I still need some help. This is the issue: after installation completes, if I run the program within my program list it will show up with a message that says I'm missing a trusted certificate or some sort. However, if I try to run the program from the folder I installed in, it will work, so I'm pretty sure I need to adjust something within the registry to adjust where my shortcuts are directing to. I believe this is an issue due to my Diamond being the chinese version. Anyone ran into similar problems or know how to fix this? Thanks.
Hey Everyone,
I am running build 217531.5.0.20 ROM on 6.5 on an ATT Fuze.
Today I decided to give the push to talk feature a try and noticed the PTT software was not in this cooked rom so, I DL it from here: http://forum.xda-developers.com/showthread.php?t=446652
I installed into the Storage Card not the device and SR. The cab installed no problem but, I am not getting the program so, I thought I would reinstall it. Now, it tells me that it detects the previous version and wants to uninstall the old one first. It asks me if that is ok and I say yes then, it tells me it can't. Continue anyway? I say yes and it fails.
So then I turn off TF3D and SR. Try again and nothing. THen I try a SR and from the beginning, I try to isntall in the device and tells it asks me if I want to remove the old and I say yes, then it says it can't and asks if I want to conitnues anyway, I say yes and it fails.
Does anyone know how to remove the PTT so I can try again?
There is no PTT registry in the HKLM, I have searched for it and all it finds is the remap keys. I used total comander and can not find any of the files or folders for it to remove it on it's own.
Any help is appreciated in advance...
THANK YOU!
UPDATE*********
Ok, so I found the rstry key in the HKLU/Software/HTC/PTT and I removed it. No change even after a SR.
most straightforward, how bout a hard-reset? since backup with messages and calls are easily done wif PIM backup.
Uh, was the ptt button mapped to something useful prior to trying to install the ptt cab (I'm thinking it had to be). You're problem is that you already had the ptt button mod in rom, I suspect. Look in \windows for long_ptt.lnk and short_ptt.lnk. You may not be able to install ptt, but if you do, definitely do it to main memory.