[ROM] MIDNOTE 3.3 Codename "B&G" (LP6 ICS FULL Working and ITALIAN QUALITY) 04/13/12
MIDNOTE3.3 SECTION
FOR ITALIAN INSTRUCTIONS READ HERE : http://forum.telefonino.net/showpost.php?p=14364037&postcount=72
LET'S START :
COMING FROM GINGERBREAD WITH FULL ROOT GUIDE :
ADVISE : DON'T FLASH FILES TO YOUR PHONE IF YOU HAVE NOT CHECKED MD5 !
1. Download base rom (named 2.1, but not important, is THE RIGHT ONE) : https://docs.google.com/open?id=0BzRB5vMumafCTFJxNVpMVDZSZDJLVG45YU1TR04zUQ
MIRROR 1 (Thanks to "anonymous572") :
http://narod.ru/disk/45030888001.2030ab5e401b93a87663148aac289a3f/MIDNOTE2.1_BASE.tar.html
MIRROR 2 (Thanks to "ashwin123") :
Part 1: http://www.mediafire.com/?2i48uqmk7u7vvpt
Part 2: http://www.mediafire.com/?wkj5dq2v1ev78ap
Part 3: http://www.mediafire.com/?25971artyvthc3b
2. Download the kernel : https://docs.google.com/open?id=0BzRB5vMumafCSk14YS01MWJUQU9VWFc4NkR5UW96QQ
MIRROR 1 :
zImage - 8.0 MB
3. Download the MIDNOTE3.3 zip file WITH MD5 6e929c82208c0e810349ab246efaa2dd : MIDNOTE3.3_NEW.zip - 583.5 MB
4. Do a nandroid backup of your actual situation
5. Open mobile Odin and select "open file", then select "step 1" tar file. Now select "kernel", then select "step 2" file (this time is "zImage" without any extension), verify that ALL (enable everoot, inject superuser, inject mobile Odin) are checked, then check also "wipe data and cache". Now press "flash firmware" and answer "yes" on md5 verify.....
6. After the flash, you will be in CWM recovery, do a WIPE DATA / FACTORY RESET, DON'T EXIT FROM RECOVERY but select "step 3" zip file and flash it. Now reboot.
7. Wait for cache rebuild, then when prompted select "SETUPWIZARD" (the second choice), check time option to "auto", then CHECK BOTH GOOGLE LOCATIONS options (keep attention to this step), DON'T ENTER YOUR GOOGLE ACCOUNT name and password in this step, finish your setup. Now select the launcher.
8. If you like STOCK SAMSUNG THEME, download this zip and flash it with CWM recovery : MIDNOTE3.3_STOCK_THEME.zip - 22.2 MB
9. Some users reported me that new "SNote" doesn't works for them, if this happens to you, please flash this zip from CWM recovery (Back to "OLD SMemo") : MIDNOTE3.3_SMEMO_BACK.zip - 32.8 MB
COMING FROM ICS ROMS (ALL VERSIONS MIDNOTE 3.0/3.1/3.2 INCLUDED) WITH LP5 KERNEL AND FULL ROOT GUIDE :
ADVISE : DON'T FLASH FILES TO YOUR PHONE IF YOU HAVE NOT CHECKED MD5 !
1. Download the MIDNOTE3.3 zip file WITH MD5 6e929c82208c0e810349ab246efaa2dd : MIDNOTE3.3_NEW.zip - 583.5 MB
2. Reboot in CWM recovery, do a WIPE DATA / FACTORY RESET, DON'T EXIT FROM RECOVERY but select "step 1" zip file and flash it. Now reboot.
3. Wait for cache rebuild, then when prompted select "SETUPWIZARD" (the second choice), check time option to "auto", then CHECK BOTH GOOGLE LOCATIONS options (keep attention to this step), DON'T ENTER YOUR GOOGLE ACCOUNT name and password in this step, finish your setup. Now select the launcher.
4. If you like STOCK SAMSUNG THEME, download this zip and flash it with CWM recovery : MIDNOTE3.3_STOCK_THEME.zip - 22.2 MB
5. Some users reported me that new "SNote" doesn't works for them, if this happens to you, please flash this zip from CWM recovery (Back to "OLD SMemo") : MIDNOTE3.3_SMEMO_BACK.zip - 32.8 MB
NOW THE CHANGELOG :
- ENTIRELY BASED ON NEW "LP6" SAMSUNG ROM
- KERNEL IS LP5 WITH ROOT (Thanks to Chainfire)
- ROM is FULL ROOT
- Full 1.4 Ghz POWER boosted with init.d scripts
- Google locations still not present in settings, but working fine with my "2.2 workaround"
- Latest Gapps included
- Latest Facebook app included with external zip and works fine
- Latest "Facelock" included
- Added new "Note S" of Samsung premium pack
- Now SPlanner works fine (sync included)
- Samsung keyboard FULL WORKING with all languages
- Contacts deleting works fine now
- All apps of "MIDNOTE2.2" included
- All chinese stuff removed
- Battery % now works fine (set it in display settings)
- Toggles in status bar now are SIX
- Vertical scrolling now is FASTER, Contacts included..
- NO "Android is updating" on every reboot
- Fixed Wifi "hangs" during reconnection
- Fixed notifications sound issue (both vibration and sound)
- Fixed "no T9 text when using smartkeyboard in browser"
- Added "Voice2go"
- Native CALL RECORDING
- Native CALL and SMS BLOCKING
- Native "Auto silent" mode
- And so on.........
WORKS IN PROGRESS :
- Nothing....
VERY IMPORTANT ADVISE : as usual, I don't want donations, but this morning I decided to devote MIDNOTE hard work to my parents ("B&G" are the initials of their names), both died of cancer, so.........if you want to give a donation, please follow this link : https://www.airc.it/aiutare-la-ricerca/donazione-online.asp Like usual, it would be good for me, after installed the rom, to fill your data in the following ONLINE worksheet : https://docs.google.com/spreadsheet/ccc?key=0AjRB5vMumafCdDlvQ3ZyQnRhMF9jWndVVXowamVvNFE THANK YOU VERY MUCH FOR COLLABORATION..
MIDNOTE3.2 SECTION
FOR ITALIAN INSTRUCTIONS READ HERE : http://forum.telefonino.net/showpost.php?p=14347921&postcount=71
LET'S START :
COMING FROM GINGERBREAD WITH FULL ROOT GUIDE :
ADVISE : DON'T FLASH FILES TO YOUR PHONE IF YOU HAVE NOT CHECKED MD5 !
1. Download base rom (named 2.1, but not important, is THE RIGHT ONE) : https://docs.google.com/open?id=0BzRB5vMumafCTFJxNVpMVDZSZDJLVG45YU1TR04zUQ
MIRROR 1 (Thanks to "anonymous572") :
http://narod.ru/disk/45030888001.2030ab5e401b93a87663148aac289a3f/MIDNOTE2.1_BASE.tar.html
MIRROR 2 (Thanks to "ashwin123") :
Part 1: http://www.mediafire.com/?2i48uqmk7u7vvpt
Part 2: http://www.mediafire.com/?wkj5dq2v1ev78ap
Part 3: http://www.mediafire.com/?25971artyvthc3b
2. Download the kernel : https://docs.google.com/open?id=0BzRB5vMumafCSk14YS01MWJUQU9VWFc4NkR5UW96QQ
MIRROR 1 :
zImage - 8.0 MB
3. Download the MIDNOTE3.2 zip file with md5 0c591ba554f895dd878f178f57ea1955 : https://docs.google.com/open?id=0BzRB5vMumafCdkZJempmU09mUkk
MIRROR 1 (MD5 c0e19e459abe540a3d9b7ddff7bfb974) : MIDNOTE3.2.zip - 550.5 MB Advise downloading from this mirror ONLY : Please, before installation, delete "SPlannerAppWidget.apk" and "SecCalendarProvider.apk" from "system/app". Thanks
4. Do a nandroid backup of your actual situation
5. Open mobile Odin and select "open file", then select "step 1" tar file. Now select "kernel", then select "step 2" file (this time is "zImage" without any extension), verify that ALL (enable everoot, inject superuser, inject mobile Odin) are checked, then check also "wipe data and cache". Now press "flash firmware" and answer "yes" on md5 verify.....
6. After the flash, you will be in CWM recovery, do a WIPE DATA / FACTORY RESET, DON'T EXIT FROM RECOVERY but select "step 3" zip file and flash it. Now reboot.
7. Wait for cache rebuild, then when prompted select "SETUPWIZARD" (the second choice), check time option to "auto", then CHECK BOTH GOOGLE LOCATIONS options (keep attention to this step), DON'T ENTER YOUR GOOGLE ACCOUNT name and password in this step, finish your setup. Now select the launcher.
8. If you like STOCK SAMSUNG THEME, download this zip and flash it with CWM recovery : https://docs.google.com/open?id=0BzRB5vMumafCY0JJLWFDVGcyNkE
MIRROR 1 :
MIDNOTE3.2_STOCK_THEME.zip - 23.9 MB
COMING FROM ICS ROMS (ALL VERSIONS MIDNOTE 3.0/3.1 INCLUDED) WITH LP5 KERNEL AND FULL ROOT GUIDE :
ADVISE : DON'T FLASH FILES TO YOUR PHONE IF YOU HAVE NOT CHECKED MD5 !
1. Download the MIDNOTE3.2 zip file with md5 0c591ba554f895dd878f178f57ea1955 : https://docs.google.com/open?id=0BzRB5vMumafCdkZJempmU09mUkk
MIRROR 1 (MD5 c0e19e459abe540a3d9b7ddff7bfb974) : MIDNOTE3.2.zip - 550.5 MB Advise downloading from this mirror ONLY : Please, before installation, delete "SPlannerAppWidget.apk" and "SecCalendarProvider.apk" from "system/app". Thanks
2. Reboot in CWM recovery, do a WIPE DATA / FACTORY RESET, DON'T EXIT FROM RECOVERY but select "step 1" zip file and flash it. Now reboot.
3. Wait for cache rebuild, then when prompted select "SETUPWIZARD" (the second choice), check time option to "auto", then CHECK BOTH GOOGLE LOCATIONS options (keep attention to this step), DON'T ENTER YOUR GOOGLE ACCOUNT name and password in this step, finish your setup. Now select the launcher.
4. If you like STOCK SAMSUNG THEME, download this zip and flash it with CWM recovery : https://docs.google.com/open?id=0BzRB5vMumafCY0JJLWFDVGcyNkE
MIRROR 1 :
MIDNOTE3.2_STOCK_THEME.zip - 23.9 MB
NOW THE CHANGELOG :
- ENTIRELY BASED ON NEW "LP5" SAMSUNG ROM
- KERNEL IS LP5 WITH ROOT (Thanks to Chainfire)
- Deodexed and zipaligned by "Zylor", very promising developer..
- Reworked installation procedure (now much easier) obtaining the same result of 3.0/3.1 versions
- ROM is FULL ROOT
- Full 1.4 Ghz POWER
- Google locations still not present in settings, but working fine with my "2.2 workaround"
- Latest Gapps included
- Latest Facebook app included with external zip
- Latest and working Samsung keyboard
- Latest "Facelock" included
- Removed Splanner and related widgets. It causes instability problems and doesn't show events
- All apps of "MIDNOTE2.2" included
- All chinese stuff removed
- Battery % now works fine (set it in display settings)
- Toggles in status bar now are SIX
- Vertical scrolling now is FASTER, Contacts included..
- NO "Android is updating" on every reboot
- Fixed Wifi "hangs" during reconnection
- Fixed notifications sound issue (both vibration and sound)
- Fixed "no T9 text when using smartkeyboard in browser"
- Added "Voice2go"
- Native SIP call enable
- Native CALL RECORDING
- Native CALL and SMS BLOCKING
- Native "Auto silent" mode
- And so on.........
WORKS IN PROGRESS :
- People with not correct number recognition, please download "number fixer" from play store and remove country code accordingly, or try to flash this zip from CWM recovery (Contacts.apk from ATT leak) : https://docs.google.com/open?id=0BzRB5vMumafCQ3MwWE9mUFE1UTg (STOCK THEMED) or this one : https://docs.google.com/open?id=0BzRB5vMumafCWFktel9CbHBJRXM (ICS THEMED)
- If you try to delete a Google account contact (with SIM contacts works fine), causes FC to android.process.acore, I'm investigating on it
VERY IMPORTANT ADVISE : as usual, I don't want donations, but this morning I decided to devote MIDNOTE hard work to my parents ("B&G" are the initials of their names), both died of cancer, so.........if you want to give a donation, please follow this link : https://www.airc.it/aiutare-la-ricerca/donazione-online.asp Like usual, it would be good for me, after installed the rom, to fill your data in the following ONLINE worksheet : https://docs.google.com/spreadsheet/ccc?key=0AjRB5vMumafCdDlvQ3ZyQnRhMF9jWndVVXowamVvNFE THANK YOU VERY MUCH FOR COLLABORATION..
MIDNOTE3.0 (now 3.1) SECTION
NOTE : 3.1 IS ONLY A "CUMULATIVE" UPDATE OF ALL 3.0 FIXES AND IT CONTAINS ICS THEME, SO YOU'LL FIND IT AT THE END OF INSTALLATION INSTRUCTIONS AND YOU STILL NEED "MIDNOTE3.0" ZIP BASE FILE. WHO WANT A "STOCK THEME LOOK", SIMPLY INSTALL "MIDNOTE3.0" ZIP BASE AND THE SINGLE FIXES YOU NEED (NOT THE THEME)
Ladies (uh, where?) and Gentlemen (uh, HOW many!!), please forget all the "2.0" rules of installation, this is a FULL WIPE version and starting base MUST BE GINGERBREAD WITH FULL ROOT.
FOR ITALIAN INSTRUCTIONS READ HERE : http://forum.telefonino.net/showpost.php?p=14331728&postcount=66
and THIS IS THE INSTALLATION VIDEO FROM OUR GREAT VIDEO PRODUCER, "ashwin123" :
LET'S START :
1. Download and flash with CWM recovery the "LP5" modem : https://docs.google.com/open?id=0BzRB5vMumafCMThLTGtla05SUnlZZUtmWmg2ZUowUQ
2. Download base rom (named 2.1, but not important, is THE RIGHT ONE) : https://docs.google.com/open?id=0BzRB5vMumafCTFJxNVpMVDZSZDJLVG45YU1TR04zUQ
MIRROR 1 (Thanks to "anonymous572") :
http://narod.ru/disk/45030888001.2030ab5e401b93a87663148aac289a3f/MIDNOTE2.1_BASE.tar.html
MIRROR 2 (Thanks to "ashwin123") :
Part 1: http://www.mediafire.com/?2i48uqmk7u7vvpt
Part 2: http://www.mediafire.com/?wkj5dq2v1ev78ap
Part 3: http://www.mediafire.com/?25971artyvthc3b
3. Download the kernel : https://docs.google.com/open?id=0BzRB5vMumafCSk14YS01MWJUQU9VWFc4NkR5UW96QQ
4. Do a nandroid backup of your actual situation (People actually on ICS rom, MIDNOTE2.0 included, must flash abyss3.9 kernel (https://docs.google.com/open?id=0BzRB5vMumafCY2EyNGRhMTctODE2MC00MDU4LWE2MjgtYjRmM2RmMmEwM2Zh), reboot kernel and go back to Gingerbread, like said before, because (I repeat) STARTING BASE MUST BE GINGERBREAD WITH FULL ROOT
5. Open mobile Odin and select "open file", then select "step 2" tar file. Now select "kernel", then select "step 3" file (this time is "zImage" without any extension), verify that ALL (enable everoot, inject superuser, inject mobile Odin) are checked, then check also "wipe data and cache". Now press "flash firmware" and answer "yes" on md5 verify.....(Odin PC causes increase of the counter, and I'm not directly experienced a flash with it, so please, don't complain on the forum if you don't want to use mobile Odin)
6. After the flash, you will be in CWM recovery, do a reboot, then wait some minutes to build the caches, ONLY FIRST TIME you will see statusbar only. Now long press power button, then select "reboot" and WAIT TILL YOU WILL BE AGAIN IN FULL WORKING SYSTEM
7. You're not yet on MIDNOTE3.0, now you have to download the REAL ROM ZIP from here : https://docs.google.com/open?id=0BzRB5vMumafCMVF6OW96dDNSSGlNVF9KR09IdU8yUQ and verify MD5 of zip file : c0193c9a404f51c298d79b47fdea03b4 Is correct ? Go to "step 8". Not correct ? redownload the zip.
MIRROR 1 (Thanks to "innercircle") : http://www.4shared.com/zip/FXq3W7EO/MIDNOTE30.html
8. VERY IMPORTANT STEP : VERIFY IF mobile Odin obtain correctly root permission, if all is OK, reboot in CWM recovery and flash "step 7" zip file, then reboot. DON'T DO ANY WIPE IN THIS STEP, SIMPLY REBOOT
9. Now you are in MIDNOTE3.0 WITH FULL GAPPS INCLUDED, please do nothing and reboot in CWM recovery (use CWM manager to do it, so you can check gains of root permissions)
10. Do a FULL WIPE DATA / FACTORY RESET, then wipe cache (NO Dalvik), then reboot
11. Wait for cache rebuild, then when prompted select "SETUPWIZARD" (the second choice)
12. Check time option to "auto", then FLAG BOTH GOOGLE LOCATIONS options (keep attention to this step), DON'T ENTER YOUR GOOGLE ACCOUNT name and password in this step, finish your setup. Now select the launcher. PLEASE, SELECT "APEX LAUNCHER", TW GIVES RANDOM FC, MAYBE A WIDGET MISSING. For the moment, DON'T CHECK TW AS DEFAULT LAUNCHER. After flashing the 3.1 update, you can also use TouchWiz.
13. Open Market and install "Maps", set GPS "off", open Maps, answer "ignore" if wants to check positions settings, then LOCATE YOUR POSITION (wifi or 3G data must be ON)
14. Download the cumulative zip "MIDNOTE3.1" with MD5 15a50dbfd75ac8725bdd2ad918769207 and install it from CWM recovery...it contains ALL below UPDATES in a single zip file : https://docs.google.com/open?id=0BzRB5vMumafCOXdvajVEV1RUYVdKUFJEN3pKdU9Cdw
THESE ARE THE SINGLE UPDATES FOR 3.0 VERSION ONLY :
U1. Rom is stock Samsung "look", if you want a real and cool ICS theme, download it from here and flash it with CWM recovery : http://forum.xda-developers.com/showpost.php?p=24388401&postcount=1777
U2. In order to have Samsung keyboard full FIXED with all languages, DOWNLOAD THESE ZIPS FROM HERE AND FLASH THEM WITH CWM RECOVERY : https://docs.google.com/open?id=0BzRB5vMumafCZ1BmdWtDSVdUMHVxcGJ0THZ0eEVwQQ and https://docs.google.com/open?id=0BzRB5vMumafCUmhLbi1maUtTRGVxSzNSbEMtb2s3dw
U3. In order to have Facebook app full FIXED, DOWNLOAD THESE ZIPS FROM HERE AND FLASH THEM WITH CWM RECOVERY : http://forum.xda-developers.com/showpost.php?p=24442054&postcount=1960 and https://docs.google.com/open?id=0BzRB5vMumafCUmhLbi1maUtTRGVxSzNSbEMtb2s3dw
U4. In order to have SPlanner (NEAR) FULL WORKING, DOWNLOAD THIS ZIP FROM HERE AND FLASH IT WITH CWM RECOVERY : https://docs.google.com/open?id=0BzRB5vMumafCQ2FPcEdEMnVRN3EzMlI0em1uc0Rhdw The only issue is that events are not displayed, but they are properly synchronized and managed
U5. (Last one ) In order to have email and exchange without Chinese stuff, DOWNLOAD THIS ZIP AND FLASH IT WITH CWM RECOVERY : https://docs.google.com/open?id=0BzRB5vMumafCM3VPc1ZBSVNUVkdQLWdiQ3hfWHRVZw
U6. If you want to INCREASE opening speed of "Contacts", "Phone" and "SMS" apps, look to this post : http://forum.xda-developers.com/showpost.php?p=24552194&postcount=2273 I had an amazing result on mine..
U7. If you need native "SIP call" included, simply flash this zip with CWM recovery : https://docs.google.com/open?id=0BzRB5vMumafCLWlhd0Nsd1BSd090clkwWHV2d1poQQ (thanks to "clubtech")
U8. Dedicated to all TW fans....now works fine (except Splanner widgets) : https://docs.google.com/open?id=0BzRB5vMumafCcFJKaUtxSENRbU9BR3BuMndGR1pfUQ
NOW THE CHANGELOG :
- ENTIRELY BASED ON NEW "LP5" SAMSUNG ROM
- KERNEL IS LP5 WITH ROOT (Thanks to Chainfire)
- ROM is FULL ROOT
- Full 1.4 Ghz POWER
- Google locations still not present in settings, but working fine with my "2.2 workaround"
- Latest Gapps included
- Latest Facebook app included with external zip
- Latest and working Samsung keyboard
- Latest "Facelock" included
- SPlanner ICS version FULL WORKING
- All apps of "MIDNOTE2.2" included (look to "/data/app" of the MIDNOTE3.0 zip file)
- All chinese stuff removed
- Battery % now works fine (set it in display settings)
- Toggles in status bar now are SIX
- Vertical scrolling now is FASTER, Contacts included..
- NO "Android is updating" on every reboot
- Fixed Wifi "hangs" during reconnection
- Fixed notifications sound issue (both vibration and sound)
- Fixed "no T9 text when using smartkeyboard in browser"
- Native SIP call enable
- And so on.........
WORKS IN PROGRESS :
- People with not correct number recognition, please download "number fixer" from play store and remove country code accordingly
- Delete contacts causes FC to android.process.acore, I'm investigating on it
VERY IMPORTANT ADVISE : as usual, I don't want donations, but this morning I decided to devote MIDNOTE hard work to my parents ("B&G" are the initials of their names), both died of cancer, so.........if you want to give a donation, please follow this link : https://www.airc.it/aiutare-la-ricerca/donazione-online.asp Like usual, it would be good for me, after installed the rom, to fill your data in the following ONLINE worksheet : https://docs.google.com/spreadsheet/ccc?key=0AjRB5vMumafCdDlvQ3ZyQnRhMF9jWndVVXowamVvNFE THANK YOU VERY MUCH FOR COLLABORATION..
MIDNOTE2.x SECTION
Ladies (uh, where?) and Gentlemen (uh, HOW many!!), please forget all the "2.0" rules of installation, this is a FULL WIPE version and starting base MUST BE GINGERBREAD WITH FULL ROOT.
LET'S START.....FIRST, OUR FRIEND "ashwin123" GREAT VIDEO "HOW TO INSTALL"(Thanks Bro).
The only file changed from 2.1 installation procedure, is "step 7" one, if you already have all the other files, no need to re-download..simply follow very carefully the installation instructions and download only "step 7" file....
1. Download and flash with cwm the modem : https://docs.google.com/open?id=0BzRB5vMumafCZTI5QXlUaUJTQXlOMHRDRktMWmU2dw (if you have already LB2 modem, go to step 2)
2. Download base rom : https://docs.google.com/open?id=0BzRB5vMumafCTFJxNVpMVDZSZDJLVG45YU1TR04zUQ
3. Download kernel : https://docs.google.com/open?id=0BzRB5vMumafCWTF2bUZtLXJSVFcwRVUwVUNIYndQZw
4. Do a nandroid backup of your actual situation (People actually on ICS rom, MIDNOTE2.0 included, must flash abyss3.9 kernel (https://docs.google.com/open?id=0BzRB5vMumafCY2EyNGRhMTctODE2MC00MDU4LWE2MjgtYjRmM2RmMmEwM2Zh), reboot kernel and go back to Gingerbread, like said before, because (I repeat) STARTING BASE MUST BE GINGERBREAD WITH FULL ROOT
5. Open mobile Odin and select "open file", then select "step 2" tar file. Now select "kernel", then select "step 3" tar file, verify that ALL (enable everoot, inject superuser, inject mobile Odin) are checked, then check also "wipe data and cache". Now press "flash firmware" and answer "yes" on md5 verify.....(Odin PC causes increase of the counter, and I'm not directly experienced a flash with it, so please, don't complain on the forum if you don't want to use mobile Odin)
6. After the flash, you will be in CWM recovery, do a reboot, then wait some minutes to build the caches, ONLY FIRST TIME you will see statusbar only. Now long press power button, then select "reboot" and WAIT TILL YOU WILL BE AGAIN IN FULL WORKING SYSTEM
7. You're not yet on MIDNOTE2.2, now you have to download the real customization zip from here : https://docs.google.com/open?id=0BzRB5vMumafCbnJDTFlJZ2xTUC01aVFnOTdYRmJYQQ and verify MD5 of zip file : 59dbd4c51b998a40c65791277d133e33. Is correct ? Go to "step 8". Not correct ? redownload the zip. This is a rapidshare mirror : https://rapidshare.com/files/2554117602/MIDNOTE2.2.zip (Thanks to "not-i")
8. VERY IMPORTANT STEP : VERIFY IF mobile Odin obtain correctly root permission, if all is OK, reboot in CWM recovery and flash "step 7" zip file, then reboot. DON'T DO ANY WIPE IN THIS STEP, SIMPLY REBOOT
9. Now you are in MIDNOTE2.2 WITH FULL GAPPS INCLUDED, please do nothing and reboot in CWM recovery (use CWM manager to do it, so you can check gains of root permissions)
10. Do a FULL WIPE DATA / FACTORY RESET, then wipe cache (NO Dalvik), then reboot
11. Wait for cache rebuild, then when prompted select "SETUPWIZARD", the second choice
12. Check time option to "auto", then CHECK BOTH GOOGLE LOCATIONS option to "ON" (keep attention to this step), DON'T ENTER YOUR GOOGLE ACCOUNT name and password in this step, finish your setup. Now select your preferred launcher.
13. Go to settings/keyboard and set samsung keyboard language option to "English/UK", and uncheck T9 prediction
14. Fast fix to FLASH PLAYER..: Use root explorer or similar app, go to system/app, click on "Adobe flash player" and select install, wait to finish. Now delete Adobe Flask apk from system\app. Flash will works fine..
15. (The last ). Open Market and install "Maps", set GPS "off", open Maps, answer "ignore" if wants to check positions settings, then LOCATE YOUR POSITION (wifi or 3G data must be ON)
VIDEO REVIEW FROM BEST XDA "VIDEO PRODUCER", "ashwin123".. :
NOW THE CHANGELOG :
- Fixed Google Locations, thanks to "lukemo" for beta testing and for inspiring me the idea. Even if not showed in "Position settings", now it works fine..
- Fixed "sometimes notifications sound need a reboot"
- Gapps are now included in ROM zip file
- Even if only in english language, now Samsung keyboard works fine, I managed some stuff thanks to many users log files...
- Added routine to auto delete all chinese stuff during first installation
- Auto brightness now works better
- Removed "android update" on every reboot for all system apps, still present only for market downloaded apps installed to internal memory
- If you use "FaceLock", this is the last version with better recognition..: http://forum.xda-developers.com/showpost.php?p=24246367&postcount=1403
- If you use VPN, this is the fix (thanks to "opensys") : https://docs.google.com/open?id=0BzRB5vMumafCSUJxYkFrLW1SWHVtdEpDcjA2T2psdw
- And this is NATIVE SIP ENABLED AND CRT SCREEN OFF EFFECT (thanks to "clubtech" for the idea) : https://docs.google.com/open?id=0BzRB5vMumafCQXhPYzZSN0NUM2kyQk8ydjYwOWZZZw
VERY IMPORTANT ADVISE : as usual, I don't want donations, but this morning I decided to devote MIDNOTE hard work to my parents ("B&G" are the initials of their names), both died of cancer, so.........if you want to give a donation, please follow this link : https://www.airc.it/aiutare-la-ricerca/donazione-online.asp
Like usual, it would be good for me, after installed the rom, to fill your data in the following ONLINE worksheet : https://docs.google.com/spreadsheet/ccc?key=0AjRB5vMumafCdDlvQ3ZyQnRhMF9jWndVVXowamVvNFE THANK YOU VERY MUCH FOR COLLABORATION..
MIDNOTE2.1 SECTION
Ladies (uh, where?) and Gentlemen (uh, HOW many!!), please forget all the "2.0" rules of installation, this is a FULL WIPE version and starting base MUST BE GINGERBREAD WITH FULL ROOT.
LET'S START.....a little longer procedure than usual, but (IMHO) worth it--
1. Download and flash with cwm the modem : https://docs.google.com/open?id=0BzRB5vMumafCZTI5QXlUaUJTQXlOMHRDRktMWmU2dw (if you have already LB2 modem, go to step 2)
2. Download base rom : https://docs.google.com/open?id=0BzRB5vMumafCTFJxNVpMVDZSZDJLVG45YU1TR04zUQ
3. Download kernel : https://docs.google.com/open?id=0BzRB5vMumafCWTF2bUZtLXJSVFcwRVUwVUNIYndQZw
4. Download gapps7.1 : https://docs.google.com/open?id=0BzRB5vMumafCMTY3OWE3NzgtMGMyMS00MWVjLWI3OTMtZDEwNDY1ZDFkY2Zl (don't complain if you use another gapps version and your calendar sync doesn't works)
5. Download MULTI-CSC : LINK REMOVED - it causes the loss of root permissions (use only for samsung keyboard "null null" issue)
6. Do a nandroid backup of your actual situation (People actually on ICS rom, MIDNOTE2.0 included, must flash abyss3.9 kernel (https://docs.google.com/open?id=0BzRB5vMumafCY2EyNGRhMTctODE2MC00MDU4LWE2MjgtYjRmM2RmMmEwM2Zh), reboot kernel and go back to Gingerbread, like said before, because (I repeat) STARTING BASE MUST BE GINGERBREAD WITH FULL ROOT
7. Open mobile Odin and select "open file", then select "step 2" tar file. Now select "kernel", then select "step 3" tar file, verify that ALL (enable everoot, inject superuser, inject mobile Odin) are checked, then check also "wipe data and cache". Now press "flash firmware" and answer "yes" on md5 verify.....(Odin PC causes increase of the counter, and I'm not directly experienced a flash with it, so please, don't complain on the forum if you don't want to use mobile Odin)
8. After the flash, you will be in CWM recovery, do a reboot, then wait some minutes to build the caches, ONLY FIRST TIME you will see statusbar only. Now long press power button, then select "reboot" and WAIT TILL YOU WILL BE AGAIN IN FULL WORKING SYSTEM
9. You're not yet on MIDNOTE2.1, now you have to download the real customization zip from here : https://docs.google.com/open?id=0BzRB5vMumafCTl9SUVBxQTFTaUtyUU8zQUZ4dmZFUQ VERY IMPORTANT STEP : VERIFY IF mobile Odin obtain correctly root permission
10. Reboot in CWM recovery, then flash gapps7.1 (step 4 zip file), reboot and configure your google account using chinese keyboard
11. Now verify MD5 of "step 9" zip file : b442d6e1f809ffad9ebf0475e2a93ed1. Only if correct, reboot again in CWM recovery and flash it
12. Now you are in MIDNOTE2.1 read below my recommendations :
- Use apex launcher (embedded in 2.1 rom), best ICS experience
- Use App Quarantine (in the app drawer), to easily freeze all the apps that you don't need (chinese or samsung), I preferred to leave the complete rom because there are many Chinese users that use MIDNOTE..
- Make a home shortcut to "quick settings", and use it to set "sound + vibrate", verify if it works correctly, then from now on you will not miss notifications..
- You will find "note everything", very nice app to makes all kind of notes
- Use "not call log" (in the app drawer) to fast switch to home after a call
- Use N7player for music (in the app drawer), best app and related widget (for my opinion)
- Use Sygic (free version in app drawer), best ICS compatible navigation program
- You can find also ICS Keyboard, try it, it's a very nice keyboard
- Freeze S-planner if you don't want to see doubled calendar events notifications
- You can use CWM recovery to flash zip files and do nandroid backups, BUT DON'T USE IT TO RESTORE ANY KIND OF BACKUPS (GB OR ICS), OR TO WIPE DATA, IT DOESN'T WORK and causes bootloop and lost of root permissions, so if you need to go back to GB, use redpill recovery from abyss3.9 kernel (http://forum.xda-developers.com/showpost.php?p=22758543&postcount=6). If you need, you CAN restore (from redpill recovery of course) also ICS nandroid backup, but remember, after that, you will not be able to delete files from system directory
- and now.......THE CHANGELOG :
A. fixed random SOD of 2.0 (thanks to LB2 modem)
B. fixed random reboot, but the "tradeoff" is the return of "android apps optimization" every reboot
C. fixed all contacts app various problems
D. fixed lots of full root related problems, now you HAVE full full full root..
E. fixed Samsung keyboard, now it's fully working like GB one (only english language)
F. fixed stock video player with all kind of video formats
G. nice "Armani" fonts
H. fixed stock internet browser, no more "black on black" address bar (but you can find also ICSbrowser+ in app drawer)
I. native call recording using stock dialer
L. real ICS themed, with more readable icons and no "double arrows"
M. torch widget works fine with three steps
.
.
Z. still works in progress for "Google locations" and battery % in display settings, on my Note I have it perfectly working (see this post http://forum.xda-developers.com/showpost.php?p=24143667&postcount=1154), but this morning a member of an Italian forum warned me that not worked for him, so I decided to publish the ROM with the settings "unmodified". I need more testing time for it... (Thanks to "lukemo" of Telefonino.net forum for the advise)
VERY IMPORTANT ADVISE : as usual, I don't want donations, but this morning I decided to devote MIDNOTE2.1 hard work to my parents ("B&G" are the initials of their names), both died of cancer, so.........if you want to give a donation, please follow this link : https://www.airc.it/aiutare-la-ricerca/donazione-online.asp
Like usual, it would be good for me, after installed the rom, to fill your data in the following ONLINE worksheet : https://docs.google.com/spreadsheet/ccc?key=0AjRB5vMumafCdDlvQ3ZyQnRhMF9jWndVVXowamVvNFE THANK YOU VERY MUCH FOR COLLABORATION..
MIDNOTE2.0 SECTION (ORIGINAL POST)
Ladies (uh, where?) and Gentlemen (uh, HOW many!!), here's to you my MaxicetDroid(MID)NOTE 2.0...
This rom is "cooked" with "XLP1" leaked chinese base, with some changes, as you can see in the changelog list.
This is a great sample video, thanks to "k1ng617 " :
Two videos on how to install and review, from "zedomax" :
Last video "how to install" from "ashwin123"
PRIMARY Download link VER.2.0 with MD5 "36f01de8473ac8651ab936ce11fa3a22" :
https://docs.google.com/open?id=0BzRB5vMumafCNzBjMmNmYzktZTQ4MS00Mjg4LThkN2YtZmUxMjFhODc3YmYw
MIRROR 1 (MAVENDO) : http://www.mavendo.de/2012/02/23/midnote-2-0-ics-lp1-and-italian-quality/
TORRENT Download link : https://remote.utorrent.com/send?bt..._NEW.zip&message=&sid=22a80eb5&cid=4465038449
Download link CF-LP1 kernel CWM flashable : https://docs.google.com/open?id=0BzRB5vMumafCYTE1ZDgyODgtYmNiZi00NTAyLTllYzUtZjJjZWZlYTUzM2Qy
Download link Abyss 3.9 kernel (thanks to Angelom) CWM flashable : https://docs.google.com/open?id=0BzRB5vMumafCY2EyNGRhMTctODE2MC00MDU4LWE2MjgtYjRmM2RmMmEwM2Zh
Download link Gapps7.1 (best ones for me) : https://docs.google.com/open?id=0BzRB5vMumafCMTY3OWE3NzgtMGMyMS00MWVjLWI3OTMtZDEwNDY1ZDFkY2Zl
INSTALLATION INSTRUCTIONS (coming from leaked ICS rom flashed from a tar file ONLY) :
1. Avviare in recovery (reboot in recovery)
2. Flashare il kernel Abyss 3.9 (flash Abyss 3.9 kernel)
3. Fare reboot della recovery (select advanced/reboot recovery)
4. Flashare la rom e rimanere in recovery (flash MIDNOTE2.0 rom and stay in recovery)
5. Flashare le Gapps 7.1 e rimanere in recovery (flash Gapps 7.1 and stay in recovery)
6. Wipe menu e fare wipe cache e dalvik (select wipe menu and do a wipe cache/dalvik)
7. Reboot
8. READ THIS : http://forum.xda-developers.com/showpost.php?p=22860395&postcount=82
9. AND THIS : http://forum.xda-developers.com/showpost.php?p=22863619&postcount=101
10. MOST IMPORTANT : Press Thanks Button (MOST IMPORTANT : Press Thanks Button ...)
INSTALLATION INSTRUCTIONS (coming from other bases like Gingerbread or CWM flashable ICS roms) :
1. Avviare in recovery (reboot in recovery)
2. Flashare il kernel Abyss 3.9 (flash Abyss 3.9 kernel)
3. Fare reboot della recovery (advanced/reboot recovery)
4. Fare wipe data/factory reset (select wipe menu and wipe data/factory reset)
5. Flashare la rom e rimanere in recovery (flash MIDNOTE2.0 rom and stay in recovery)
6. Flashare le Gapps 7.1 e rimanere in recovery (flash Gapps 7.1 and stay in recovery)
7. Wipe menu e fare wipe cache e dalvik (select wipe menu and do a wipe cache/dalvik)
8. Reboot
9. READ THIS : http://forum.xda-developers.com/showpost.php?p=22860395&postcount=82
10. AND THIS : http://forum.xda-developers.com/showpost.php?p=22863619&postcount=101
11. MOST IMPORTANT : Press Thanks Button (MOST IMPORTANT : Press Thanks Button ...)
CHANGELOG VER. 2.0 :
- XLP1 leaked chinese base (Thanks to Samsung)
- CF-5.2 kernel (Thanks to Samsung and Chainfire)
- Stably rooted and with CWM app (Thanks to my intuition )
- Deodexed and zipaligned (wow, what a surprise..)
- Real ICS themed, with "nexus style" settings.apk, see some attached screenshots (Thanks to itsme_4ucz for some pngs of his ICS theme I used for some status bar and notify icons)
- Real call recording (echo is still present using bluetooth headset)
- Chinese stuff completely deleted
- Added Gocontacts EX with ICS theme (select it from theme preferences)
- Added Swype last version
- Fixed apps update every reboot
- Changed fingerprint to be market recognized "N7000"
****************************************************************************************************
Very important : It would be good for me, after installed the rom, to fill your data in the following ONLINE worksheet : https://docs.google.com/spreadsheet/ccc?key=0AjRB5vMumafCdDlvQ3ZyQnRhMF9jWndVVXowamVvNFE THANK YOU VERY MUCH FOR COLLABORATION..
AN ITALIAN IDEA, A GOOD IDEA...
NOTE 1 : I would like to thank the team of "telefonino.net" for their invaluable help, advice, support and beta testing - THANKS SO MUCH TO "DOC", "DEEP", "FERDI" AND "KARNAK"
NOTE 2 : I DON'T WANT DONATION FOR THIS WORK, IF YOU LIKE IT, SIMPLY CLICK "THANKS"...
This is the MIDNOTE (2.0 only) ADDON place, remember rules to flash without issues : http://forum.xda-developers.com/showpost.php?p=22860395&postcount=82
**1** : 02/25/2012
MIDNOTE2.0_ADD2_VARIE - https://docs.google.com/open?id=0BzRB5vMumafCaUd4MGdGLVlUX09MLWl6dGRBOHVmUQ
Changelog :
- localization without GPS fix (sometimes)
- crt off
- battery % (directly in status bar icon)
- removed ugly "O" symbol in close status bar png
- dialer themed with MIDNOTE 1.4 SNOW EDITION pngs (ics look)
- added "usb mass storage" in settings/others
- added dsp equalizer
- added swype with ALL languages (register in swype beta web first)
- added semi transparent weather widget (thanks to H-KaN)
**2** : 02/25/2012
MIDNOTE2.0_15TOGGLES - https://docs.google.com/open?id=0BzRB5vMumafCWGIwUVRDUW9TTWFObm94NXpfeld6dw
Changelog :
- bigger statusbar icons (more readable)
- added lidroid 15 quick launch
- fixed "sound + vibration" function (set it with quick audio toggle)
WITH THIS ADDON FLASHED, USB MASS STORAGE MOUNT WILL FAIL, USE USB CONNECTION BY MTP
**3** : 02/27/2012
MIDNOTE2.0_5TOGGLES_RESTORE - https://docs.google.com/open?id=0BzRB5vMumafCQ0VFbFk5OE9UYmlOQlYybF9fY3dqdw
Changelog :
- much bigger statusbar icons (more readable)
- removed arrows from wifi and network data in/out
- added battery with only numbers
WITH THIS ADDON FLASHED, USB MASS STORAGE WORKS FINE
downloading...
Torrent link:
http://tinyurl.com/6t5mkhp
Thankyou maxicet for your excellent work!!!
Installed it a few hours ago and so far all is working.
Fastest and solide ROM for daily use for me.
Only the theme is a bit low contrast, many of input boxes are barelly visible.
Please, disable WiFi if want to use GPS.
CoPilot crashes if WiFi is enabled.
For me the fastest ROM for now, only light bugs and i hope our great dev will eliminate it soon.
Contacts need a bit more work, the displayed name is wrong on call, thats only bug.
Thakyou for the "Italian quality" ROM its really the best now.
Great please can you write what doesn't works?
---------- Post added at 12:20 AM ---------- Previous post was at 12:18 AM ----------
ziko said:
Thankyou maxicet for your excellent work!!!
Installed it a few hours ago and so far all is working.
Fastest and solide ROM for daily use for me.
Only the theme is a bit low contrast, many of input boxes are barelly visible.
Please, disable WiFi if want to use GPS.
CoPilot crashes if WiFi is enabled.
For me the fastest ROM for now, only light bugs and i hope our great dev will eliminate it soon.
Contacts need a bit more work, the displayed name is wrong on call, thats only bug.
Thakyou for the "Italian quality" ROM its really the best now.
Click to expand...
Click to collapse
thanks for your report
uhu...my first post on xda...
Great max!
oh another ICS rom !You entices me?
Great Rom but No root ...
Gesendet von meinem GT-N7000 mit Tapatalk
m3dd0g said:
Great Rom but No root ...
Gesendet von meinem GT-N7000 mit Tapatalk
Click to expand...
Click to collapse
install from market the app
Massimo,
Theme looks great. Hope you are finding the ICS leak more useful than I am. I got your PM, but I'm really still just using GB and waiting for a new CM9 build.
Regarding your PNG issues, I would inspect the original apk and make sure the image pixel sizes of the themed replacement matches.
avetny said:
install from market the app
Click to expand...
Click to collapse
Cant install it because it is installed and cant delete without root
Gesendet von meinem GT-N7000 mit Tapatalk
Thanks for you rom!!
First looks very smooth, stable and fasts.
My first issue, the home button isn't working.I will do a new wipe and installation and want see, if would be bether.
EDIT: I hope you will do an absolut ICS themed rom!!
Thanks for the awesome work. Got everything working & its been peeerfecto!
Svox tts
Is the svox problem fixed? Anyone tried ?
@all
managed to figure out whats wrong with dialer and contacts.
If the phonenumber of person calling you, is saved with international prefix, e.g. 0041xxx or +41xxx, in your contacts, than you see only the phonenumber from the caller but there is NO ASSOCIATION with your contacts. And on display you should see "HunagdeHuongGong" as caller name and his phonenumber, WITHOUT international prefix.
For Switzerland is international prefix 0041xxx or +41xxx.
For inlandcalls i use the 044xxx for Zürich region.
So i have a phonenumber like this 00 41 44 xxx saved in my contacts, the callerID displayed is only 044xxx and the phone dont find any contact with matching number to display the name.
Dont know how its for another country, but this causes the crash from dialer and contacts in Switzerland and Europe, with prefix 00xxx or + als leader.
I changed the phonenumbers of my contacts to only reginal prefix and the callerID works flawless, the callername is proper displayed on screen.
Hope any dev can fix this issue.
I think thats wrong because the leak is from China and there are different callerID and prefix managments.
swisszulu said:
My first issue, the home button isn't working.I will do a new wipe and installation and want see, if would be bether.
Click to expand...
Click to collapse
After a new wipe and installation there is no correction. Also with USB connection my phone wasnt found by windows.
@ziko
Did you try the other ICS leak for Europe market? Was there no problem with contacts? Could you try if the problem exists with the contacts apk from european release? If you don't have it I can upload it.
Gesendet von meinem GT-N7000 mit Tapatalk
-16- said:
@ziko
Did you try the other ICS leak for Europe market? Was there no problem with contacts? Could you try if the problem exists with the contacts apk from european release? If you don't have it I can upload it.
Gesendet von meinem GT-N7000 mit Tapatalk
Click to expand...
Click to collapse
I have flashed all ICS ROMs available on XDA.
The first chinese leak too.
There is no problem, i will try your contacts apk
GO Dialer EX and GO Contacts EX works, only the stock ones are faulty...
Related
Hi,
found this here: http://b.it168.com/thread-1861355-1-1.html.
I successfully flashed it on my Note and it's working flawlessly.
Translation of the thread (with small clarifications):
Statement:
Flashing may damage your phone.
If you are willing to take this risk, then continue to read and follow the prompts.
If you hesitate to take this risk, do not flash!
Thank you!
Note:
This CWM update package completely wipes your data, so back it up before flashing.
To flash this CWM package, make sure your phone has CWM Recovery.
While this ROM comes with Samsungs official kernel, you won't have CWM Recovery anymore after flashing it!
To get it back, you have to flash the CWM + Root-Kernel from the kernel package via Odin.
ROM package Download: http://minus.com/lbmFjR9aGytLI6
ROOT + CWM kernel and official kernel Download: http://min.us/lbr3L9wf7aHUuC
Flashing instructions:
1. Download attachment 'N7000ZSKK1_ROM.bin', rename it to 'N7000ZSKK1_ROM.exe' and extract it using '7zip'.
2. Copy the extracted file ('N7000ZSKK1_wipe.zip') to the phone built-in SD card root directory.
3. Turn off the phone and hold the volume + HOME + POWER button on the phone to enter CWM Recovery mode.
4. Select 'install zip from sdcard' and confirm.
5. Select 'choose zip from internal sdcard' and confirm.
6. Find 'N7000ZSKK1_wipe.zip' and confirm.
7. Select yes to confirm flashing 'N7000ZSKK1_wipe.zip'. This step may take longer, please be patient.
8. When flashing is finished, press the return key to return to the main menu.
9. Select 'reboot system now' to restart your device.
Features:
1. Hong Kong-based version of the latest 2.3.6 ROM N7000ZSKK1
2. Deodexed, zipaligned
3. Thin version (few System Apps removed) [If you think that this version is too thin for you, you can add every App you want manually, as they are all additionally contained in the first download package (ROM package).]
4. Added Chinese voice
5. Original Samsung kernel
6. Transparent weather widget
7. Data switch button in pulldown bar
8. Built-in quick restart of the OS
9. Chinese input method
10. Special ringtone as default
11. Percentage battery indicator (accurate to 1%)
12. Removal of 10 contacts limit of short message and SMS being automatically converted to MMS after SMS-length of 4 SMS removed
13. Call log does not show SMS and MMS
14. Desktop icon shadows removed
15. Call recording
16. Calls attribution
17. Integrated latest version of BusyBox
18. Replaced GPS files
19. Pre-Rooted
20. Languages: English (UK), English (US), Chinese
All credits go to 平海浪子, the author of the thread mentioned above.
I am not responsible for any damage to your devices caused by this firmware.
Greetings
Pupy991
Am having problems downloading from that site due to my inability to read Chinese can you tell me what I need to click on as Google is unable to translate Div elements injected into the (page) DOM via javascript it appears.
qazzi76 said:
Am having problems downloading from that site due to my inability to read Chinese can you tell me what I need to click on as Google is unable to translate Div elements injected into the (page) DOM via javascript it appears.
Click to expand...
Click to collapse
Hi,
here you are:
1.
2.
Greetings
Pupy991
Thanks for the swift reply.
Unfortunately that gray button to the right of the green button doesn't show on my page in either Chrome, Firefox, or IE.
Hmmm..
Just logged onto a remote server and observed the same behavior...
The button doesn't show...
Possibly the site assesses the incoming IP address and reacts accordingly from a region specific perspective...
We need a mirror.
Strange...An hour ago it worked without any problems but now that grey button doesn't show up anymore...
I don't come from China or anywhere near so I don't think that this is related to your or my region...
Mirror is uploading, but my internet connection is not that fast, so it will take about 1-2 hours...Sorry!
Edit: Mirror is online, Links in OP are updated.
ROM: http://dl.dropbox.com/u/48827105/N7000ZSKK1_ROM.exe
Kernels: http://dl.dropbox.com/u/48827105/N7000ZSKK1_Kernel.exe
pupy991 said:
Strange...An hour ago it worked without any problems but now that grey button doesn't show up anymore...
I don't come from China or anywhere near so I don't think that this is related to your or my region...
Mirror is uploading, but my internet connection is not that fast, so it will take about 1-2 hours...Sorry!
Edit: Mirror is online, Links in OP are updated.
ROM: http://dl.dropbox.com/u/48827105/N7000ZSKK1_ROM.exe
Kernels: http://dl.dropbox.com/u/48827105/N7000ZSKK1_Kernel.exe
Click to expand...
Click to collapse
Does this still have touch wiz?
Sent from my GT-N7000 using xda premium
Yes it does.
Sorry, I'm a bit clueless.
The downloads are .exe and the instructions say to download the .zip.
Do I rename the .exes to .zip? Or do I just drop them on as is?
- Frank
The .exe files are compressed, you have to extract them using '7zip'.
If you extract the file 'N7000ZSKK1_ROM.exe' for example, you'll get the file 'N7000ZSKK1_wipe.zip', which you can flash via CWM Recovery then, just as described in the OP.
I'll edit that in OP to clear things up.
Would the counter be added, if I flash this KK1 Rom ? Would the yellow triangle shows up ?
Thanks !
Flashing this via CWM Recovery will not add to your counter. Just follow the OP steps.
link is down!!! can someone mirror it
cybermessiah said:
Flashing this via CWM Recovery will not add to your counter. Just follow the OP steps.
Click to expand...
Click to collapse
Thx, coz I read someone mentioned DON't use Odin to flash that the counter will increase. Jig not works for Note. And currently, found no solution to reset the counter.
And just wanna make sure, Flashing the CWM + Root-Kernel from the kernel package via Odin that won't increase the counter, right ?
Thx.
pupy991 said:
Strange...An hour ago it worked without any problems but now that grey button doesn't show up anymore...
I don't come from China or anywhere near so I don't think that this is related to your or my region...
Mirror is uploading, but my internet connection is not that fast, so it will take about 1-2 hours...Sorry!
Edit: Mirror is online, Links in OP are updated.
ROM: http://dl.dropbox.com/u/48827105/N7000ZSKK1_ROM.exe
Kernels: http://dl.dropbox.com/u/48827105/N7000ZSKK1_Kernel.exe
Click to expand...
Click to collapse
Error (509)
This account's public links are generating too much traffic and have been temporarily disabled!
Its Normal at dropbox.
... tapat*lked
someone mirror them on minus.com ?
Both links are down . Very much like dropbox
I'm uploading another mirror right now (at minus.com).
Sorry for the inconveniences, I simply forgot that the traffic over at dropbox is limited!
Edit: Mirror uploaded, OP updated. Strangely minus.com renamed the archives to .bin ending, so you have to rename them manually to .exe ending after downloading them.
ROM package: http://min.us/lbmFjR9aGytLI6 (Rename it from N7000ZSKK1_ROM.bin to N7000ZSKK1_ROM.exe)
Kernel Package: http://min.us/lbr3L9wf7aHUuC (Rename it from N7000ZSKK1_Kernel.bin to N7000ZSKK1_Kernel.exe)
pupy991 said:
I'm uploading another mirror right now (at minus.com).
Sorry for the inconveniences, I simply forgot that the traffic over at dropbox is limited!
Edit: Mirror uploaded, OP updated. Strangely minus.com renamed the archives to .bin ending, so you have to rename them manually to .exe ending after downloading them.
ROM package: http://min.us/lbmFjR9aGytLI6 (Rename it from N7000ZSKK1_ROM.bin to N7000ZSKK1_ROM.exe)
Kernel Package: http://min.us/lbr3L9wf7aHUuC (Rename it from N7000ZSKK1_Kernel.bin to N7000ZSKK1_Kernel.exe)
Click to expand...
Click to collapse
Downloading...
I'm not the developer of this great ROM. But I consider that it's so good that it must appear in the XDA forum. The developer is ELITE, and he is the person that must upload to the appropiate forum, not me. But I think that everybody would have the opportunity of knowing it.
In the follow link you can see an impressive new ROM developed under the new NEXUS base IMM30B (4.0.4), developed by Elite Based on FoxHound (Galaxy Nexus Modacco)
Beta4r2 version (07/03/2012)
http://www.toma.htcmania.com/showthread.php?t=336223
Chagelog: IMM30B 4.0.4 4r2
- 1 Toogles via CWM
- 2 SD en PC
- 3 Gapps
- 4 T9 Dialer via CWM
- 5 Galaxy S2 4.0.3 appereance
- 6 Better consume
- 7 Apex Launcher
- 8 Beats Audio
- 9 FaceUnlock via CWM
- 10 % Batt
- 11 Volume & Bright w/o FC'S
- 12 Framework optimized
- 13 Modem JVU
- 14 Import contacts from SIM
- 15 GPS Fix
Installation instructions (IF YOU COME FROM AN ICS ROM IT'S NOT NECESSARY THE STEPS 1 TO 4, YOU CAN START ON 5) Nothing special issue for flashing, it's as other ICS roms
We take
1 Keep apart a copy of efs folder for security
2 ° reboot in recovery and from mount / storage format to do everything.
3 ° We turn off the phone and restart download mode.
4 ° We put the ROM JVU from odin with marked repartition restart the mobile alone, shut it off and enter again to get downloading cf-root from odin on pda without repartition. (roms stock http://www.sammobile.com/)
5 once mobile is restarted, we debug rom usb and copy the "4.0.4 beta 4r2" in the internal sd and reboot in recovery.
6 ° We wipe factory reset, cache partition, Dalvik cache and we flash "4.0.4 beta 4r2"
7 ° If we do not start, press the 3 button to return to recovery and repeat step 6.
8 º Open the app NSTools, we select as governor and Scheduler Smartassv2 VR or that you like.
9 ° enjoy ..
Links
4.0.4 [IMM30B] BETA 4 R2. http://-/ http://www.mediafire.com/?52x32zzy8m9dtic
Toogles Status Bar . [WIPE DALVIK & CWM] http://www.mediafire.com/?l7qd31qeploaj47
Contactos T9 . [WIPE DALVIK & CWM] http://www.mediafire.com/?9jw3qhpl1gz36l6
Face Unlock. [WIPE DALVIK & CWM] http://www.mediafire.com/?qwb73zm74uld9iv
Thanks to:
- lanyco
- almeral2010
- manoleitor
- rolodo
- vanscampa
- demonstone
- rodrigoalumno
- cquintana92
- mikelange
- rostro.palido
- Pac-Man
- migui7
- ipepiot11
- stareduski
cont
Nobody is interested?
It is a ROM developed by a spaniard developer -Elite- and is working perfectly in daily use
.htcmania.com/showthread.php?t=336223
Sent from my SGH-I9000 using XDA
cont
As I don't have 10 messages yet I can't write the complete link
They are:
www + .htcmania.com/showthread.php?t=336223 (in Spanish)
or in German
www + .android-hilfe.de/custom-r...2-03-12-a.html
artikeln said:
In the follow link you can see an impressive new ROM developed under the new NEXUS base IMM30B (4.0.4)
I don't have permissions for publishing in others subforums, maybe an authorized one could inform about this incredible ROM
w...toma.htcmania.com/showthread.php?t=336223
I can't even write the complete link
Could anybody do it?
Click to expand...
Click to collapse
http://www.htcmania.com/showthread.php?t=336223:)
There you go!
Can u post a review of this rom or some links? Which is in English?
cont
Achal1012 said:
http://www.htcmania.com/showthread.php?t=336223:)
There you go!
Can u post a review of this rom or some links? Which is in English?
Click to expand...
Click to collapse
Thanks, I'm sure that all the people who test this ROM will be impressed
The original link is up in this message. The last version is the beta4
Original text translated from Spanish
Installation instructions by Pirri_Mori (in red for Beta4) (IF YOU COME FROM AN ICS ROM IT'S NOT NECESSARY THE STEPS 1 TO 4, YOU CAN START ON 5)
We take
1 efs folder to your computer and all we want to keep.
2 ° reboot in recovery and from mount / storage format to do everything.
3 ° We turn off the phone and restart download mode.
4 ° We put the ROM JVU from odin with marked repartition restart the mobile alone, shut it off and enter again to get downloading cf-root from odin on pda without repartition.
5 once mobile is restarted, we debug rom usb and copy the "4.0.4 beta 4" in the internal sd and reboot in recovery.
6 ° We wipe factory reset, cache partition, Dalvik cache and we flash "4.0.4 beta 4"
7 ° If we do not start, press the 3 button to return to recovery and repeat step 6.
8 º Open the app NSTools, we select as governor and Scheduler Smartassv2 VR or that you like.
9 º disable the GPS, we set screen brightness and repaired automatically.
10 º We selected media device in USB support.
11 º begin the recovery, we wipe Dalvik cache and install the fix SD for Beta4.
12 º We again after starting the recover, wipe Dalvik cache and install the Google Apps with your package you will (come all).
13 ° enjoy ..
- Information on Beta4 (02/03/12):
- Android 4.0.4 [IMM30B] OFFICER (NO CM)
- Fixed bug Android OS
- Control BLN (Light LED's)
- Rooted
- BT & Wifi without problems
- Sensors and graphics files Nexus S
- Fast and stable (daily use)
- Excellent use
- Fix Pin Phone
- Sync Facebook
- Mount SD PC
- Toogles in Status Bar
- Beats Audio
- Market
- Nova 10.1 Launcher
- Flash Player
- Google's App updated
- Mount SD mobile
- Update build.prop (Toro)
- Virtual Keyboard (Option to disable)
- Wifi Thetering
- Calculator Touchwiz
- Bugs:
(Beta4) Like the other betas, it takes a while to get the bars of coverage (seeking Fix)
(Beta4) FC on screen brightness.
BEFORE THE BETA 3/4 PLEASE READ THIS:
1, THE ROM IS A NEW BASE
2 ° THE ROM HAS NO PROBLEM (FULLY FUNCTIONAL, WIFI, GSM, BT, 3G, STORAGE, ETC ..)
3 WILL SLOWLY THINGS SOLVING.
4° THE COMMENT "NO ROM TAKES CONTROL, THAT IS Cyanogen, AND THIS IS NOT"
5 ° I repeat, NOT A WORKING COPY / PASTE.
artikeln said:
Thanks, I'm sure that all the people who test this ROM will be impressed
The original link is up in this message. The last version is the beta4
Original text translated from Spanish
Installation instructions by Pirri_Mori (in red for Beta4) (IF YOU COME FROM AN ICS ROM IT'S NOT NECESSARY THE STEPS 1 TO 4, YOU CAN START ON 5)
We take
1 efs folder to your computer and all we want to keep.
2 ° reboot in recovery and from mount / storage format to do everything.
3 ° We turn off the phone and restart download mode.
4 ° We put the ROM JVU from odin with marked repartition restart the mobile alone, shut it off and enter again to get downloading cf-root from odin on pda without repartition.
5 once mobile is restarted, we debug rom usb and copy the "4.0.4 beta 4" in the internal sd and reboot in recovery.
6 ° We wipe factory reset, cache partition, Dalvik cache and we flash "4.0.4 beta 4"
7 ° If we do not start, press the 3 button to return to recovery and repeat step 6.
8 º Open the app NSTools, we select as governor and Scheduler Smartassv2 VR or that you like.
9 º disable the GPS, we set screen brightness and repaired automatically.
10 º We selected media device in USB support.
11 º begin the recovery, we wipe Dalvik cache and install the fix SD for Beta4.
12 º We again after starting the recover, wipe Dalvik cache and install the Google Apps with your package you will (come all).
13 ° enjoy ..
- Information on Beta4 (02/03/12):
- Android 4.0.4 [IMM30B] OFFICER (NO CM)
- Fixed bug Android OS
- Control BLN (Light LED's)
- Rooted
- BT & Wifi without problems
- Sensors and graphics files Nexus S
- Fast and stable (daily use)
- Excellent use
- Fix Pin Phone
- Sync Facebook
- Mount SD PC
- Toogles in Status Bar
- Beats Audio
- Market
- Nova 10.1 Launcher
- Flash Player
- Google's App updated
- Mount SD mobile
- Update build.prop (Toro)
- Virtual Keyboard (Option to disable)
- Wifi Thetering
- Calculator Touchwiz
- Bugs:
(Beta4) Like the other betas, it takes a while to get the bars of coverage (seeking Fix)
(Beta4) FC on screen brightness.
BEFORE THE BETA 3/4 PLEASE READ THIS:
1, THE ROM IS A NEW BASE
2 ° THE ROM HAS NO PROBLEM (FULLY FUNCTIONAL, WIFI, GSM, BT, 3G, STORAGE, ETC ..)
3 WILL SLOWLY THINGS SOLVING.
4° THE COMMENT "NO ROM TAKES CONTROL, THAT IS Cyanogen, AND THIS IS NOT"
5 ° I repeat, NOT A WORKING COPY / PASTE.
Click to expand...
Click to collapse
Thanks for the translation!!
As you are using this rom can you tell me more about the bugs? Like what else is not working besides screen brightness?
And what does this mean "Not a working copy /paste "??
And last thing why this rom is not posted here on this forum? (maybe you can tell me!! )
The ROM is working perfectly and the only minor bug I have detected is is relation to the brightness and the volume. Both are ok, only is not working for increasing or decreasing, except if you put the fix.
Ref to the fix for the SD, I couldn't identify the problem
ELITE, the developer is preparing a new version, beta4r2, that include theses fixes
Ref to the "And what does this mean "Not a working copy /paste "??", ELITE talks about that this ROM is developed under the Nexus base IMM30B, it's not an evolution of any CM
Ref to the "And last thing why this rom is not posted here on this forum? (maybe you can tell me!! )". All his former developments have been issued only in the htcmania web. ELITE doesn't look too much interested in translating to english the explanations. However after 15 months of flashing roms, for me this is the best ROM I have never settled down in my SGS, and I consider that everybody must know it, enjoy it and contribute to make it even better.
Two messages more and I'll be authorize to talk about this development in the correct forum.
Sorry for this one.
Besides, once this ROM appear there, users from HTCmania will start to talk in English about their own experience
This Rom seems very promising.
Sent from my GT-I9000 using Tapatalk
I'm using this ROM for more than 10 days and the last Beta4 since 48 hours ago and it's really the best ROM I have never settled down.
The developer maybe is not intresred in uploading this ROM that XDA subforum due to XDA is very strict for the new ROMs, and he is not really interested in spending a lot of time in burocracy instead of development.
Never mind, here you are this ROM
Elitemobil the beta4r2 will upload soon, that comment yesterday...
Sent from my GT-I9000 using XDA
So that.
We are waiting that today, maybe tomorrow is released.
Once it's ready, I'll post here
The new 4.0.4 Beta4r2 is released
In page 1
I have been running this for a few hours now. it seems dead fast.
And some how it has got my 3g working again.
Why is this rom in the Q&A??
I have also got the face unlock working. wow it all works
zacburgess said:
I have been running this for a few hours now. it seems dead fast.
And some how it has got my 3g working again.
Why is this rom in the Q&A??
I have also got the face unlock working. wow it all works
Click to expand...
Click to collapse
For reconnecting 3g again you must only switch off the data, put the 3g and switch on the data
I'm not the developer, only I make a reference of this great ROM. And the only place where I can do is in this subforum.
I hope that the developer put his great job in the appropiate forum.
This rom work perfectly for daily use. The only bug is the permanent signal bar.
But, do you have Elite's permission to publish it here?
Better than Dark Night rom?
Sent from my GT-I9000 using xda premium
After 24 hours using the last versión, beta4r2, it's sure that now this ROM for me it's working much better than dark night. It's a real 4.0.4 base
I'm have been flashing ROMs for 14 months and never my SGS has worked as now
doudou1408 said:
Better than Dark Night rom?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Much more. This is a real 4.0.4 and works like a charm :OK:
Enviado desde mi Alcatel One Touch
Hello guys, just sharing my first porting work to u all
Please read this post from first to the end of this post
"Please respect to my work,
I'm doing this fix all alone by
giving up my rest time, quota (since i didnt have wifi), etc..
so dont complain if u find any bugs, or
a lil bit hassle to install it.
if u find any, just report it to me
if it's possible to fix,
i will try to make a patch / troubleshoot updates."
Click to expand...
Click to collapse
NOTE : DO THIS AT YOUR OWN RISK
Changelogs :
ROM :
#> BETA 2 - 20151213
- Fixed META-INF problem, can flash using any recovery now except stock
- Fixed Completely selinux problem
- Fixed Camera and screen issues on other A1 devices (ex Mito Impact a10)
- Fixed Flashlight
- Fixed Bootloop at first time install (dont need to wipe dalvik again)
- Fixed Offline charging
- New kernel and ramdisk
- some other patches and minor fix
#> BETA 1 - 20151211
- Fixed RIL (only single sim for now)
- Fixed Launcher icons
- Fixed Dialer and Contacts FC
- Fixed Change wallpaper FC
- Fixed some layout
- Fixed MTP
- Fixed Themes FC
- some minor fix and patches
#> DevBuild 1 (Tester Only)
- Initial Release
- All Devices standard features working except (for now) :
RIL (SIM Network/Data Cellular)
- Some of apps fc
Click to expand...
Click to collapse
PATCH :
#> Patch for BETA 2 - 20151220
Fix LED notification
New sqlite_jni [test] : tell if u got any huge sqlite problem in the {logcat} than before patch
Fix weather app
#> Patch for BETA 1 - 20151211
Patched services.jar to disable apps verify
DownloadProvider fix
Click to expand...
Click to collapse
Bugs :
- DUALSIM
- Launcher 4x5 layout bug (use another launcher if u want)
- Google play services sometimes fc. Due to unexpected sqlite problem sometime
- Media stopped working after 5-10 seconds gplay services fc so cant take screenshot and gallery become empty, and in some cases taking screenshot while opening screenshot folder using miuigallery (u need to reboot the phone or wait approx 10-30min)
- Font changing in theme app only works for miui's default browser
- tell me other
Click to expand...
Click to collapse
Download links :
ROMs :
MIUI6_20151213_BETA 2
MIUI6_20151211_BETA 1
GApps :
GApps_miui6_optimized_edition
Patchs :
BETA 2 :
miui6_patch_beta2_20151220
BETA 1 :
miui6_patch_20151211
BOOTLOOP PATCH : miui6_patch_after_flash
BOOTLOOP PATCH : miui6_patch_after_boot
Installation Procedure :
1. Go to recovery
2. Wipe data, cache, system
3. Flash the rom
4. Flash miui gapps
5. Flash the patch (if any)
6. Reboot.
If u are updating from BETA 1 to BETA 2, i recommend to do a wipe data or clean flash to avoid some unexpected issues
BETA 1 Notes :
For you who gettings bootloop at last time, try this :
1. Download these two bootloop patch
2. Rewipe your phone (data,cache,system)
3. Flash the rom, then flash gapps, after that reboot to recovery mode
4. Flash the miui6_patch_after_flash
5. Reboot. Wait till its booting to homescreen (approx 6-10mins)
6. After finishing the setupwizard, go back to recovery
7. Flash the miui6_patch_after_boot
8. Reboot. And ur done
After booting and finishing the setup wizard (and done flashing the bootloop patch if u got bootloop), set selinux to permissive, set using kernel adiutor (go to plugins, download selinux plugin, set to permissive), enable apply on boot
After booting to homescreen u can reput your 2nd card now. but remember its will still didnt detect your 2nd card
Troubleshoot :
1. How to enable root access?
- Open security app, choose permissions, root access .. there u go (make sure ur root apps already asked for root first to show it on there)
2. How to disable warn when want to install app?
- Open Privacy, choose device administration, change in unknown sources from ask to allow
3. How to make my phone mtp detected?
- Unplug ur usb, open miui default file explorer, select phone, wait till its complete loading, then connect ur usb
4. Google apps or keyboard is force closing how to fix?
- Use my miui6_gapps
5. Titaniumbackup is restarting after grant root access, how to fix?
- Update your current tb to version 7.2.1.2 or latest
6. Cant install apps from PS, says no free storage, how to fix?
- Flash the download provider fix
7. Cant install apps from my sdcard, says no free storage, then after i try it its says install failed
- Set your phone selinux to permissive, then use root ex delete the package folder in data/data .. ex Im failed to install bbm, delete the com.bbm folder
8. Cant import theme from sdcard, what to do?
- The new MIUI at default doesnt allow you to apply theme which not from their store, but try other theme, theres some of theme still can be imported
9. Issues with downloading, how to fix?
- Turn off the xunlei download engine at download - settings, also set the limit to unlimited
10. Navbar is too small, how to fix?
- If u want alternative, use MiPop 2.0 .. im reduced its size due to fix some of layout bugs. To remove the navbar add "qemu.hw.mainkeys=1" without " in the bottom of the build.prop then push Mipop.apk to system/priv-app
11. How to show messenger chat heads?
- Download app-ops app from playstore, install then reboot, after that search for messenger permission, enable the draw over blabla permission : thanks to Kishan Kumar for the guide
How to Install Video Review, thanks to Sounak Pal :
Here
To appreciate my hard works, you can consider giving me some donations by :
Giving some steam wallets : nteztaz
or if u at Indonesian country, u can send me some credit balance to buy quota,
msg me for my call number
Credits :
[email protected] for the rom base
Yusuf Maulana for the idea of porting from 'based cm11'
Sounak Pal for the video review
All my Tester
All Android One users
Me (TezTaz Si Rama)
A huge thanks for this Rom was waiting for different ui.
It would be great if u will provide some screen shots
Screenshots
I havent found any fc
Hoping that the sim bug will be fixed soon
I dont mind using the Single SIM as I use it for single sim most of the time. Thank you for sharing it here. I'm downloading it now.
an awesome rom
This is the best rom I have ever used on my Sparkle V. Very smooth ,
but I found a bug - while backing up data on local storage the phone hangs and reboots itself in a minute, but that's not a major issue.:good:
guys, I tried flashing, but failed. ,
- first I tried wipe everything, and then flash. But flash or rom failed, giving sole softlink issue. I tried multiple times, but failed. Finally, fixed issue by having another 4.4.4 rom installed first and then flashing this rom without wiping system
- once flash was successful, I rebooted device, but it keeps looping wihout booting up. OP suggested multiple iterations of (battery remove, goto recovery, wipe dalvik, boot) , but I am in my 7th attempt and device not booting still.
How many times you guys had to wipe dalvik? Very much anxious to test this MIUI rom !
Flash why philz
Do not flash gapps it was bootlooping
yadavdharmendar said:
Flash why philz
Do not flash gapps it was bootlooping
Click to expand...
Click to collapse
thanks @yadavdharmendar, I am installing from philz, and I avoided installing gaps as well. Still not luck. I get Simlink error.
I am coming from FIUI rom. Not sure if that matters (as anyway I am wiping everything before starting rom flashing).
I was on Fiui too
Then i flash cm11 ,then miui
yadavdharmendar said:
I was on Fiui too
Then i flash cm11 ,then miui
Click to expand...
Click to collapse
thanks! But why you installed CM11 first before installing Miui. OP didn't asked for it. Just curious to know!
And where you got CM11 from? From Cyanogenmod download page for "sprout"?
mobilepgk said:
guys, I tried flashing, but failed. ,
- first I tried wipe everything, and then flash. But flash or rom failed, giving sole softlink issue. I tried multiple times, but failed. Finally, fixed issue by having another 4.4.4 rom installed first and then flashing this rom without wiping system
- once flash was successful, I rebooted device, but it keeps looping wihout booting up. OP suggested multiple iterations of (battery remove, goto recovery, wipe dalvik, boot) , but I am in my 7th attempt and device not booting still.
How many times you guys had to wipe dalvik? Very much anxious to test this MIUI rom !
Click to expand...
Click to collapse
Its not davlick issue it's just meta inf folder bug
Just open ROM zip and delete meta inf folder and replace it from any downloaded sprout ROM zip just copy meta inf folder frm there and paste it in miui ROM n u r done just do a clean install n w8 for 5 mins
teztaz--v3 said:
Hello guys, just sharing my porting work to u all
"Please respect to my work,
I'm doing this fix all alone,
so dont complain if u find any bugs,
if u find any, just report it to me
if it's possible to fix,
i will make a patch updates."
Changelogs :
Bugs :
Download links :
ROMs :
Here
MIUI GAPPS :
soon
Patchs for Download Provider :
Here
Installation Procedure :
1. Remove your 2nd sim card, then go to philz recovery or LATEST (2.8.7.x) TWRP recovery (darkplay)
2. Wipe data, cache, system (or just use the 'clean to install rom' function)
3. Flash the rom
4. Flash miui gapps
5. Flash patch
6. Reboot, wait till 6 mins, pull your phone battery, then goto recovery and wipe dalvik cache, then reboot*
7. After booting and finishing the setup wizard, set selinux to permissive, set using kernel adiutor, enable apply on boot
*do it again until the progress bar bottom of the screen showing
Troubleshoot :
1. How to enable root access?
- Open security app, choose permissions, root access .. there u go (make sure ur root apps already asked for root first to show it on there)
2. How to disable warn when want to install app?
- Open Privacy, choose device administration, change in unknown sources from ask to allow
3. How to make my phone mtp detected?
- Unplug ur usb, open miui default file explorer, select phone, wait till its complete loading, then connect ur usb
4. Google apps or keyboard is force closing how to fix?
- Change your gapps, use pico/nano gapps for now
5. Titaniumbackup is restarting after grant root access, how to fix?
- Update your current tb to version 7.2.1.2 or latest
6. Cant install apps from PS, says no free storage, how to fix?
- Flash the download provider fix
7. Cant install apps from my sdcard, says no free storage
- Wipe data your phone, reflash again, after boot set selinux to permissive
Credits :
[email protected] for the rom base
Yusuf Maulana for the idea of porting from 'based cm11'
All my Tester
All Android One users
Me (TezTaz Si Rama)
Click to expand...
Click to collapse
not downloading rgt now....will instead wait for another a bit stable build...a salute to your work...hope ur working on fixes...already pressed thanx button...keep going boy...
Thanks all. Installed cm11, then installed ROM with the patch, and avoided flashing any gapps. It worked! Just one bootloop, which went away after wiping dalvik.
Thanked OP!!
BTW, any ways to make the navigation buttons look big. And possibly increase bar height?
about 2nd sim
bro plz plz get 2nd sim working.
thanks for your work and you are awesome.
@teztaz--v3
how to make navigation bar transparent ?
and a big thanks for your beautiful awesome work
no FCs seen so far!! Looks perfectly usable as daily rom.
Just one problem seen :
Can not install Google maps. Says insufficient space, which is strange. Also failed to install Link2SD. Tried even installing from ADB, gave error INSTALL_FAILED_UID_CHANGED. Hope Miui is not blocking it.
Every thing is fine bro its super rom but I can't move apps to SD card
Thanks bro! gr8 work! bt can u make e single zip with all fixes? people will get confused with so many patches
nsytechno96 said:
bro plz plz get 2nd sim working.
thanks for your work and you are awesome.
Click to expand...
Click to collapse
B'coz this ROM is based on CM11, it's impossible to get multi sim working
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei P8 Custom ROM
* MagicArrow *
Version Two
Magisk Edition and Classic Edition
Teamwork by Tecalote and KangV
Based on the European firmware b398 - only installable, if you are already on Marshmallow Firmware (Android 6)
Developed on GRA-L09 C432 - but it should run on all GRA-xxx models and regions due to my modification
Thread for German Users: https://www.android-hilfe.de/forum/root-custom-roms-modding-fuer-huawei-p8.2257/huawei-p8-rom-6-0-emui-4-0-3-magicarrow-v2-by-tecalote.819399.html
Well, you've been waiting long enough I am pleased to present you the new version of Arrow under the extended name "MagicArrow"
1) Difference between Magisk and Classic Edition:
The Magisk Edition was made to have a safteynet capable device that still offers much more features than Stock Firmware ... It has the same features like Classic Edition, with one difference: Outward It looks as if you had not unlocked the bootloader .... Apps like Pokemon Go, various banking apps - which does not work anymore on rooted devices should work in this Rom
However, you can not install Xposed Framework in the Magisk Edition without losing the green safetynet! There is the systemless Xposed Framework by topjohnwu, the developer of Magisk and it works, can be easily downloaded and installed in the Magisk Manager via modules (SDK 23) - but - there is currently no way to pass safetynet with a modified custom Rom together with Xposed Framework! For this reason, the installation pool in K-Settings for Xposed is removed from its function.
Attention: Update the preinstalled Magisk with newer Version 15.3 flashable zip made for this ROM: https://forum.xda-developers.com/showpost.php?p=75178940&postcount=871
Then look in the Thread for new posts about future Updates.
The Classic Editon is rooted with SuperSU and has same features, but you cannot bypass safteynet check. However, who does not run apps depending on this "questionable" service will have the same joy with this Rom. The advantage of the Classic Edition is: You can install from K-Settings Wanams Xposed Framework 87.1 and use a lot of Xposed modules ...
2) Requirements and information for this Rom:
If you want to have the best of this Rom, then it would be necessary to start completely clean - means from Custom Rom back to Stock Firmware b398 - With the exception of devices for which there is no more recent firmware than b370. An EMUI Custom Rom is as good as the before installed Firmware in the background. In principle, only system, cust and kernel will be flashed with the Rom zip. The original Firmware update a lot more, like modem etc. Therefore, the Custom Rom works best if you start from latest firmware for your device on which the Rom is based.
If you have already latest official Huawei Stock Firmware installed, it is less work...
I really dont recommend to flash dirty this Rom directly from Arrow v1 or if you stay on older Firmware. System and Apps will be wiped with the installation script. So you cannot keep your previous apps and data, you have to install them new.
You need the latest TWRP:https://dl.twrp.me/grace/twrp-3.1.1-0-grace.img Do not use older ones!
The bootloader must be unlocked. Pick up the Huawei unlock code, because it is always valid for the same device. If you do not have an unlock code from Huawei and have problems to get it from Huawei Website, recently you can call regional Huawei service hotline and get the code by mail during 24 hours.
3) Installation guide for the MagicArrow:
1) Backup your apps and data from your current Firmware or Rom - but only User-Apps and not System-Apps. You can use Huawei Backup as well as TitaniumBackup. (Dont restore any System-Apps from previous system in the new Rom - example: if you use Huawei Backup dont backup Phonemanager, but you can backup desktop layout, sms, calendar, User-Apps etc.) Dont backup and restore Chat-Apps like WhatsApp, Viber, WeChat, Facebook and so on - use their inbuilt Backup Function like Google Drive Backup (its different, some Apps are storing everything on their server like Telegram) You must install and register Chat-Apps new on your new Rom. If you dont do that, Push-Notifications cannot work.
2) Make a backup of important folders and files from your internal storage (DCIM, WhatsApp folder, Downloads....)
3) Download Firmware update.zip - depending on the device model - and unzipp it on your PC - you receive META-INF and UPDATE.APP
GRA-L09C432B398: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v88316/f1/full/update.zip
GRA-L09 with other Cust: http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=GRA-L09&firmware_page=0
Other GRA models: http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=GRA&firmware_page=0
4) Copy UPDATE.APP and META-INF into a folder on the root directory of your external SD which must have the name: dload
5) If you are on Stock Firmware, not rooted you can directly update your Firmware. But go to step 6
A) If you are on Stock Firmware, but rooted, with TWRP installed and Xposed Framework installed, uninstall first Xposed Framework, reboot to system, after unroot your device, restore original boot.img and flash the original Huawei Stock Recovery.
B) Arrow Editions: If you have Xposed Framework installed, uninstall Xposed Framework, reboot to system (15 min) - after go to step 6
If you are on Arrow v1 Classic Edition without Xposed Framework, flash Huawei Stock Recovery from K-Settings /more settings / flash recovery - flash official recovery. You can reboot directly from here to Stock Recovery.
If you are on Arrow v1 Magisk Edition without Xposed Framework, flash with TWRP Magisk Uninstaller: http://tiny.cc/latestuninstaller and after flash Huawei Stock Recovery b391 (by choosing img): https://www.androidfilehost.com/?fid=529152257862705190
- go to step 6
6) Press Vol+ and Power Button until phone reboot and hold this position until phone boot up to Stock-Recovery. Here you do first "Wipe Cache Partition" and second "Factoryreset" - go to step 7
7) If you start EMUI Update from here, just go to Restart and press Vol+ and Vol- (in the middle down and hold this position), wait until phone reboots and EMUI Software Installing begin (of course, update.app and meta-inf must be already in dload folder)
If you was back in system between you can start update with pressing down Vol+ and Vol- in the middle and at the same time pressing Power Button. Wait until phone reboot and you see Huawei Logo. Now you can release Power button, but you must keep holding all the time the pressing down postion with Vol+ and Vol- until EMUI Software Installing begin. After some time your firmware is updated and restart to system. Dont make an account yet, just make short setup.
8) Open settings /about phone and klick 7 times on build number for enabling developer options. Open developer options and in there enable USB Debugging. After go to settings / (advanced) settings and enable "unknown sources"
9) Connect your device with USB to your PC and let windows install the drivers or install HiSuite (which installs drivers if windows cannot recognice) You need the USB Connection. With Minimal ADB and Fastboot in administrative mode you can flash now the newest TWRP, which I have linked above.
10) Disconnect your device from USB Cable, soon TWRP is succesful flashed
11) With Vol+ and Power Button reboot your device to TWRP - this step is important if you want to keep TWRP
12) Allow system modification and go to ADVANCED WIPE - choose in the first step ONLY internal Storage (nothing else). Do not wipe internal Storage together with the other partitions in step 14! Soon internal storage is wiped, go back to main menu and restart the recovery. You should get the Root Permission request from TWRP "Allow system modification" once again, allow it and open settings to configure (24h clock, language, time zone, etc) If you dont get the Root Permission request from TWRP yet, you will get it after next boot to TWRP.
13) Now copy MagicArrow.zip to your external SD - Attention: If you want the boot sound to be played on the phone - before flashing the Rom, sound must be switched on!
14) Boot to TWRP and go to ADVANCED WIPE - Wipe following partitions:
Dalvik/Art Cache
Cache
Cust
data
system
15) Go back to main menu and flash MagicArrow. After flashing is done, reboot system without wipe of dalvik/cache. As you know, the first boot process can take up to 15 minutes (just like installing the Xposed Framwork)] After boot to system and first setup - you have to make some IMPORTANT STEPS (see next Point) before you restore /installing your apps and adjust your phone.
4) Important information for the Magisk -Edition:
During first setup you may receive a root-rights request, if so, confirm this. After first setup - please do not open the Magisk Manager . Before you do anything else,open settings / about phone and klick 7 times on build number to enable the developer options. Open developer options and in there enable USB debugging! Then go back to Settings - in the b398 there are the extended settings with the short name: Settings. In it, please enable " allow unknown sources "
At this point restart immediately your P8.
Now open the Magisk Manager, the app is looking for updates - to speed this up, drag from first white field (like refresh of a website in Chrome) with the finger pressed down - the manager is up to date. Makes a query of the Safteynet = green.
Then you go in the Magisk-Manager left to the Controll-Pannel to settings. Do not change anything, with one exception: enable systemless hosts! This step is very important. Then immediately the second reboot .
Next open AdAway and activate the hosts file (download files and activate the advertising block) - then the third reboot .
After open AdAway again and see if the hosts file is active, if it is, all well, if not, download the hosts files once again and restart P8. (Sometimes another reboot is necessary at the point) Only when AdAway is green (activated) - then the safetynet is passed by. You can now again check in the Magisk manager safetynet = green - if you do not these steps, you can break the safetynet. In addition, root and apps can be blocked!
As you know, Magisk uses his own superuser, integrated into Magisk Manager
For some reason if you have problems with safetynet with some apps, just download the following module in the Magisk Manager in the Control-Pannel under Download:
Universal Safetynet Fix
Otherwise, please do not download any modules, you do not know if they run and what they do.
Two modules are preinstalled - please leave this, otherwise this Rom does not function properly with K-Settings!
5) Important information for the Classic -Editon:
The Classic edition gets systemless Root during the installation by SuperSU 2.82 SR1 (SR1 has an integrated update for Huawei devices). After Rom is flashed and you restart phone, the first boot process will terminate, the device will restart once again - this is normal because of systemless rooting . Why systemless this time? Because of compatibility with SuperSU. The new versions of SuperSU are rooting always systemless. If there is the next Final version of SuperSU, you need only flash the zip in TWRP and there are no problems with the update.
To enable AdAway , just download the AdAway ad block (hosts file) and reboot the P8 - but after rebooting, please open AdAway again and see if it worked the first time - otherwise just download again and restart the device once more. The second time it fits. AdAway is controlled by the systemless root using an init.d script that mount the hosts file systemlessly and this script is usually only active after the second restart. If you ignore this step, you can block root privileges.
6) Features:
• VoLTE and IP-Calling enabled - disable it, if your mobile provider dont support it!
• Push notifications working - Enable WhatsApp, Telegram... as protected apps and enable Wlan and mobile data during "sleeping mode" as always on
• Most Gapps contained in system debloaded - please dont flash any GApps, just install it with Playstore (Core GApps and settings are present in the Rom)
• System is deodexed
• pre-rooted: Classic Edition by Chainfires SuperSU 2.82 SR1 - Magisk Edition by topjohnwuMagiskSU 13.3
• BusyBox 1.27.1 - Please dont change this BusyBox to any other (not Stericson, not JRummy...)
• Call Recorder - You can enable recording manually, if a call comes through with the memory icon in dialer - or constantly in dialer settings
• Some nice themes, BlackPyramid ...
• K-Settings - as usual with extended restart menu
• MiXplorer (very powerful Root-Explorer) and TitaniumBackup (can store backups without any problem through storage SD instead of document provider)
• Dolby / Atmos for Teamwork with Viper4Android - best experience with BlackPlayer (or similar) but not Huawei Music App
• Security patch level 1 July 2017 - all known Stagefright Security holes are closed
• Multiwindow mode - you can start this mode with long tap on square in navigation bar. Close the Mod in the middle with the turquoise symbol.
• Viper4Android (enable it via K-Settings) can be linked to its settings permanently in notification bar for quick access. - as usual.
• Xposed Framework of Wanam included in K-Settings, Installation start from there, reboots automatically. The Restart needs about 15 minutes.
• VIA Browser instead of Chrome
• AdAway - newest release
• And much more...
7) Phone Manager and the app PMPlus:
Phone Manager does not include the Autostart Manager in European Firmware. The advantage is: you do not have to worry about anything, everything is controlled automatically - and also works. But the battery consumption is slightly more, since all apps wait in the background to be called.
With the app PMPlus, you can activate the Autostart Manager in the Phone Manager. To do this, start the app, go to Installation and as soon as the succesful message comes, close the app (can be uninstalled thereafter). Now, on screen two of the Phone Manager, the entry "App auto-launch" appears!
But NOTICE - through this upgrade will initially set ALL Autostarts to 0 ! You must manually enable the most important apps in App auto-launch - all apps that should receive push notifications - and, most importantly, SuperSU in the Classic Edition and Magisk Manager in the Magisk edition. Otherwise Root permissions do not work!
Advantage: You have control over which apps should not start at system start or in the background (if you need it rarely)
But you must always remember to activate a newly installed app there if necessary. Example: Amazon, E-Bay, PayPal - some of these apps are coupled and not only need the autostart to work , but also the so-called " app activation " (which appears in Autostart Manager when such apps are installed)
Disadvantage: If the apps are not configured correctly in the mask, you have more trouble than good. So, if you're not control freaks, then let's keep your fingers out of it.
But if you want to activate this function, it is recommended to do it at the end, if you have already installed all the apps you are using and not before!
8) Disable Chinese Letters:
The Rom is European, but the K-Settings are from KangV. Thats why the Lunar component is installed in K-Settings (these are the only Chinese letters in this Rom).
To hide these, go to K-Settings:
1) Lockscreen and desktop settings and disable: "Lunar Calendar" and at "Desktop weather lunar"
2) Notification settings - disable: "Show statusbar lunar"
9) Save Battery:
NFC (with Android Pay) ist enabled by default - disable it and enable it only for the time you need it
VoLTE is enabled by default - disable it, if your mobile provider dont support it
Location Settings (menu: scan settings) disable WLan and Bluetooth Search while Wlan and Bluetooth is disabled, Navi Apps are working also without this setting.
Performance is enabled by default - change this in Akku-Manager (part of Phone Manager) to SMART
With "auto app-launch" (if you have installed) you can disable Apps which you use just sometimes.
Bluetooth enable it - if you use it and disable it - if you dont need it at the moment
9) Download MagicArrow:
MagicArrow Classic Edition: https://www.androidfilehost.com/?fid=889764386195920974
MD5: 5ee32443300f10dcbced4808101aff42
MagicArrow Magisk Edition: https://www.androidfilehost.com/?fid=673368273298976764
MD5: 7afa8619778a81a11a60665f27b2289f
Magisk-Update to 15.3 - use only this zip from this post please: https://forum.xda-developers.com/showpost.php?p=75178940&postcount=871
Please check the MD5 after the download! Because if the download / the zip is faulty - then you have problems after the flash!
And please keep to my instructions - then everything is as it should be
Have much fun with this ROM
Many thanks to KangV for his K-Settings Framework
If you like K-Settings - fell free to donate KangV: https://www.paypal.me/KangVIP
If you like MagicArrow, I am happy about some beer: https://www.paypal.me/Tecalote
Many thanks and credits to other great Developers:
@guitarededhero (Viper/Atmos) https://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137
@wanam and @rovo89 and @DVDandroid for the Xposed Framework Development
@HootanParsa (MiXplorer) and @YashdSaraf (BusyBox arm64)
@topjohnwu (systemless Xposed Framework and Magisk)
@Chainfire - SuperSU
@dkionline - Custom Roms for P9
@Blackball - BlackPyramid Theme and Custom Roms for P8 - P9 - P10
Last Thread Update: 03.01.2018
Right settings for Push Notifications and install manual for Stock Firmware Update
Right Settings to make Push-Notification work for Chat-Apps like WhatsApp:
Settings with Phone Manager:
1) Once you have installed with PMPlus the Autostart-Manager called: App auto-launch as a part of Phone Manager- WhatsApp, Viber and all those apps must be activated!
2) Activate these applications also in Protected apps
3) In Notification center activate for these applications - Priority display, Status bar, Banners and Lock screen
4) If these apps are available in Dropzone management - activate them
5) In Phone Manager /open Akku-Manager (Remainning) and in this mask open the settings-symbol above - deactivate Power-intensive prompt and deactivate "Close excessively power-intensive apps" and some lines below:
Activate: Keep Wi-Fi on when sleeping ALWAYS - Keep mobile data on when sleeping
Settings with Permissions and Notifications:
1) Open settings /Apps and search for WhatsApp. In this mask you find Permissions- and Notifications-Settings , go inside of both and set the needed permissions for the app and also "Alllow Notifications" and Priority display
Settings in Developer options:
1) one point after "use legacy DHCP client" - set: Mobile data always active
Additional Settings:
1) Settings /More - Open Mobile network and set: Mobile data - and Enable always-on mobile data
2) Open Settings /Wi-Fi and go to menu in the right corner below "Advanced setting" - set: Keep Wi-Fi on during sleep ALWAYS
3) Open Settings /Notification panel & statusbar - activate: Notification panel "Allow notification panel to be opened from the lockscreen if not password protected
4) Open Settings /Screen lock & passwords - activate "Show detailed notification info" and activate optional "Notification turn on screen"
For most users of ARROW Push-Notification for Chat-Apps are working now as they should (whitout converting them to system-apps like in Gratitude before) -
And for most users battery life is much more better than in Gratitude or in Stock Firmware.
But for some users not!
- Notifications coming not constant or not at all - andBattery life is worse than before - How can that be?
Answer: The complete different initial situation and sometimes also the settings.
Initial Situations (examples):
User A updated Lollipop with Stock Firmware to Marshmallow a long time ago (example: from b200 to b317) - after he was going to Custom Rom "Gratitude" - and from this time he was never back to any Stock Firmware and flashed new versions of Custom Rom always dirty.....
User B was also last on b317, after on "Gratitude" and flashed every new version clean, with Fullwipe.....
User C was last on b321a, after on "Gratitude" and flashed every new version clean, with Fullwipe but Arrow dirty....
User D was on Gratitude 5 and then he go back to Stock Firmware b370 - from there with OTA to b382 and after he flashed TWRP and did a Fullwipe before installing ARROW - this user has the best starting position! And for this user ARROW should work as provided
Why?
Custom Rom can only modifiy on Huawei Devices following partitions: system - cust - vendor (and nothing else!) Modem Updates, Updates for Push-Notifications and other sync services or battery software updates are coming with official Firmware!
The best performance for ARROW is given, if your Marshmallow Firmware and Bootloader and Modem.... is also up-to-date.
There is no need to do following steps, if you have flashed ARROW and everything is fine for you.
I would recommend to go back to Stock Firmware as an step between - before flashing ARROW - for Users which come from Gratitude and for Users which have already ARROW installed and issues with Push-Notifications or too much battery drain!
(STOCK-RECOVERY AND UNROOT IS REQUIRED - AND YOU NEED ALWAYS FULL FIRMWARE FROM CUSTOM TO STOCK) - see install manual below!
The Full-Firmware you download (no OTA Files please) should be minimal b370 (which is available for all models). After this EMUI-Installing with reboot to system you can use in settings the Update-App to receive the next OTA Update and install this also. If the Update-App says after installing "no more Updates available" it is okay!
Normally you can use one Full-Firmware above b370, for GRA-L09 it is b382 - alternatively you can use b391 - but a higher version like b391 seems not work (cause Rom is based on b391)
Complete List of Huawei P8 Firmwares (for all models and cust v.): http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra
GRA-L09:
GRA-L09 Full Firmware b370: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v54178/f1/full/update.zip
GRA-L09 Full Firmware b382: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v69133/f1/full/update.zip
Attention: Bootloader may closed after update with Firmwares above 390 (even if showing in fastboot mode as open - but cannot flashing TWRP "command not allowed" - needs unlock Bootloader again)
GRA-L09 Full Firmware b391: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v71319/f1/full/update.zip
Complete list for GRA-UL00: http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra-ul00
Complete list for GRA-TL00: http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra-tl00
Complete list for GRA-CL00: http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra-cl00
Firmware for GRA-CL10: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G985/g104/v73798/f1/full/update.zip
Complete list for GRA-UL10: http://hwmt.ru/oth/HWFF/info/view.php?find_model=gra-ul10
Install manual:
To go back to Stock Firmware you have to do following steps:
1) Backup what you need to backup! Use Huawei Backup and also Titanium Backup. NOTE: But dont restore in the new ARROW then system-apps or data from system-apps from previous system! Restore only USER-APPS. For Chat-Apps like WhatsApp, Viber, Skype use the built-in Backup function - but keep or backup the folder from those apps on internal memory (because you need them on the same place if you reinstall those apps)
Battery must have minimal 80% doing those steps....
2-A) Users of Classic-Edition: Open K-Settings /more settings /flash recovery - Flash official Recovery (grant Root-Permission) - this flashes Stock Recovery in half a second.
2-B) Users of Magisk-Editon: Please go to TWRP and flash Magisk-Uninstaller.zip to unroot your Phone. Users of Gratitude Magisk Edition should also flash unsu.zip (both linked in OP) After reboot make a connection with USB to your PC. With Minimal ADB and Fastboot program (on PC) flash Stock-Recovery. If you dont know how to do, ask me in this Thread. Download: https://www.androidfilehost.com/?fid=529152257862705190
If you have Xposed Framework installed - uninstall it (Magisk Users in Magisk Manager/Modules - Classic Users in K-Settings /Xposed Settings /Install Xposed confirm - Reboot needs about 15min)
3) Download the Full Firmware for your model, unzipp it on your PC (mostly you get update.app and meta.inf)
4) Create a folder on internal memory or external SD and name it: dload
5) Copy only update.app and meta.inf (if meta.inf is present) in this folder. After DISCONNECT USB from Phone!
6) Reboot to Stock Recovery - with Restart menu (also possible with pressing Vol+ and Power-Button at the same time as long until Recovery is displayed)
7) Wipe Cache with Stock Recovery (it uses another engine than TWRP) and do after a Factory Reset. There is no need to restart the phone to system now. Go to:
8) Press Vol- and Vol+ (in the middle) and Power-Button at the same time, until phone reboots and EMUI-Software-Installing is displayed
9) Let the EMUI-Installing finishing - it reboots automatically to system and starts the EMUI-Optimizing - wait until Language-Selection is displayed. Make a short set up (You can skip the most) - but it is important to arrive the homescreen.
10) Go to Settings / About the phone and tap 7x (times) on Build-Number. It activates developer options.
11) Go to Developer options and activate USB DEBUGGING - after open Advanced settings /security and activate "Unknown Sources"
12) Connect Phone with USB to your PC (Accept the Fingerprint query with "always" on your Phone) Look, if Windows installed the right drivers so you have access to phone - if not install HiSuite http://consumer.huawei.com/minisite/HiSuite_en/index.html and make a connection with HiSuite. Allow installing HiSuite on Phone. If you have access now, close HiSuite (also in Background).
13) Copy ARROW-Rom to your Phone.
14) With Minimal ADB and Fastboot flash TWRP: https://www.androidfilehost.com/?fid=529152257862681510 - if you are unsure with the right commands, ask me in the Thread.
15) DISCONNECT USB Cable now from your Phone
16) Press Vol+ and Power-Button at the same Time until phone reboot (at the moment, Huawei Logo comes you can leave Power Button, but keep holding Vol+) Reboot to TWRP takes a while
17) Set up TWRP (allow modification, set language, screen timeout, time zone...)
18) There is no need to wipe internal SD (but if you like to do this, do it at first and restart after TWRP - then you must setup TWRP again)
18) Go to Wipe, Advanced Wipe and wipe: Dalvik&Cache, Cache, data and system
19) Install ARROW Rom
20) Restore User-Apps, but dont restore any System-Apps (or data from it) Chat-Apps install from Playstore, and use the built-in restore function.
ARROW should work now as ist should!
Men like always the best work!! I already intalled the Arrow ROM... At the moment working excellent... Congratulations :highfive:
Hucast_DL said:
Men like always the best work!! I already intalled the Arrow ROM... At the moment working excellent... Congratulations :highfive:
Click to expand...
Click to collapse
Thank you
Hello @Tecalote, at first i wanna thank you for your work! I want to as you, in description you have "Open PMPlus, select "install it" - message "succesful installed" , but not such app is preinstalled in my Rom, clean flashed classic version, any tips?
00471 said:
Hello @Tecalote, at first i wanna thank you for your work! I want to as you, in description you have "Open PMPlus, select "install it" - message "succesful installed" , but not such app is preinstalled in my Rom, clean flashed classic version, any tips?
Click to expand...
Click to collapse
Hi This is interesting - I am at home in two hours and loading up the apk for you.
I flashed both versions of the Rom about 20 times for testing several things and had always the App preinstalled...
I think it is cause of TWRP.
After making a Nandroid Backup before flashing the Rom it has problems to unmount and remount partitions.
If data was not mounted correctly, the App would not be preinstalled - cause it should go to /data/app
That's why I recommend, after making a Backup to Restart TWRP (reboot Recovery) before flashing the Rom...
Tecalote said:
Hi This is interesting - I am at home in two hours and loading up the apk for you.
I flashed both versions of the Rom about 20 times for testing several things and had always the App preinstalled...
I think it is cause of TWRP.
After making a Nandroid Backup before flashing the Rom it has problems to unmount and remount partitions.
If data was not mounted correctly, the App would not be preinstalled - cause it should go to /data/app
That's why I recommend, after making a Backup to Restart TWRP (reboot Recovery) before flashing the Rom...
Click to expand...
Click to collapse
i will try dirty reflash it with mounted data and let you know :good:
EDIT. reflashing fixed it and app appeared, thanks for halp @Tecalote
To say sir, a perfect job, thank you for all your effort and give you the opportunity to have this great ROM. My congratulations and best wishes to you.
Sent from my GRACE using XDA Labs
lespaul79 said:
To say sir, a perfect job, thank you for all your effort and give you the opportunity to have this great ROM. My congratulations and best wishes to you.
Sent from my GRACE using XDA Labs
Click to expand...
Click to collapse
Thanks a lot
Hello, first of all, thank you for this amazing rom. I've installed it about 6 hours ago and its work perfect at the moment. The only thing that I cannot explain is why show me the block screen weather widget in Chinese, can u help me?
enzoade1994 said:
Hello, first of all, thank you for this amazing rom. I've installed it about 6 hours ago and its work perfect at the moment. The only thing that I cannot explain is why show me the block screen weather widget in Chinese, can u help me?
Click to expand...
Click to collapse
Hi
Written in OP
"In ARROW are not included Chinese letters, with the exception of "Lunar" - which comes with K-Settings. Gratitude users know how to get rid of them. For all others:
1) Go to K-Settings, in there to:
2) Notification Settings / Show "statusbar lunar" - deselect.
3) Go to Lockscreen and desktop settings "Lunar calender + desktop wheather lunar" - deselect."
Great work, flashed it on my UL00 3 hours ago after wiping cache and dalvik cache only, everything seems to work alright, I can confirm that this ROM works flawlessly on UL00.
Ammar_ said:
Great work, flashed it on my UL00 3 hours ago after wiping cache and dalvik cache only, everything seems to work alright, I can confirm that this ROM works flawlessly on UL00.
Click to expand...
Click to collapse
Hi Thank you for your feedback!
You have installed the ROM on the Middle Eastern variant UL00C185...
I am glad to hear that it not only works on GRA-L09
This is what I promised, but I wasn't 100% sure - cause I have only L09...
I am interested which build number is displayed in "About the phone"?
Thanks!
Everything is looking good so far. Thank you for your time and effort!
How do I activate automatic call recording? Is there a possibility of adding more regions to this rom? I have region specific software that fails. My digital satellite provider's software checks my region before it can work. I'm in South Africa.
rodlane said:
Everything is looking good so far. Thank you for your time and effort!
How do I activate automatic call recording? Is there a possibility of adding more regions to this rom? I have region specific software that fails. My digital satellite provider's software checks my region before it can work. I'm in South Africa.
Click to expand...
Click to collapse
Hi there Automatic Call Recording can be enabled that way:
Open the Dialer App - below left is a star, below right is the symbol for the settings menu. Open it and there you can enable automatic call recording.
For the other issue: Can you give me a link to an African Marshmallow Huawei Stock Firmware? So I can look at it and perhaps include the Region.
Which Region did you set up right now?
Thanks very much man!
Flashed it last night, after it took me half an eternity to backup all my files (had something messed up so I had to look a bit deeper). Flashing and all was fine, including xposed via magisk.
Been using it the day now, but at 2 Things im not sure if it is caused by the Rom or by the latest whatapp update:
-in widgets i can select WhatsApp - but there is no more this huge 4*2 widget with message-preview, does anybody else have this? (only WhatsApp Chat and WhatsApp camera available there)
-even though i have given WhatsApp all permissions, my Screen won't wake up when i receive a message. It was quite usefull while the phone lay at my table i could see in one glance whether or not it was important and decide to pick it up
....okay i have tried a bit and found out my Screen also won't wake up after receiving sms or email.. where could i look after that? every app has "Show on lockscreen" enabled
There was another thing, which i could't read fast enough, but it was something with kvip Settings and some overlay permissions and a path where to find them or so?
it popped up a couple of times at the beginning (those little messages in the lower middle of the Screen, just like "wifi connected") next time i will try to make a screenshot of that.
edit:
@Tecalote congrats for 500 Posts and 300 likes! :good:
@Tecalote your ROM IS ****ing awesome, congratulations!!!
Enviado desde mi HUAWEI GRA-L09 mediante Tapatalk
@ChavezD For the Wakeup Screen you must open Phonemanager and in there the Notification Manager. Every App like WhatsApp and Gmail, Email... is in the list - open WhatsApp or Email in the list and set up "Showing on Homescreen" and everything.
The other things I must look. Small popup messages should be shown, like "RAM 1.7 GB available, Wifi connected".. I must look later, at the moment I am not at home
Edit:
For enabling the Wakeup on Homescreen - you must go to Settings /Screenlock and Password - and there set up : Notification turn on screen!
Tecalote said:
@ChavezD For the Wakeup Screen you must open Phonemanager and in there the Notification Manager. Every App like WhatsApp and Gmail, Email... is in the list - open WhatsApp or Email in the list and set up "Showing on Homescreen" and everything.
The other things I must look. Small popup messages should be shown, like "RAM 1.7 GB available, Wifi connected".. I must look later, at the moment I am not at home
Click to expand...
Click to collapse
@Tecalote yeah those Settings are all activated, really don't know what went wrong for me again or what i broke..
EDIT: OH god damn it, thank you so much! I hope i didn't actually disable it half sleeping this morning/"night"
Take your time, it wasn't annoying or anything, just wondered what it was. But it's exactly as you described, but not just 4 words but 4 rows or so in the same time period.
Maybe im also gonna reflash and not install every stupid app i've installed once. Is there any Chance to stop Google from automatically downloading all (>100) recently installed apps after reflashing a Rom? [I always Flash clean, so.. no dirty Flash for me^^]
Edit2: I think in those Messages i was talking about it wasn't Overlay - it was Dropzone. But still no clue what i should do there, everthing is allowed that wants to be
ChavezD said:
@Tecalote yeah those Settings are all activated, really don't know what went wrong for me again or what i broke..
EDIT: OH god damn it, thank you so much! I hope i didn't actually disable it half sleeping this morning/"night"
Take your time, it wasn't annoying or anything, just wondered what it was. But it's exactly as you described, but not just 4 words but 4 rows or so in the same time period.
Maybe im also gonna reflash and not install every stupid app i've installed once. Is there any Chance to stop Google from automatically downloading all (>100) recently installed apps after reflashing a Rom? [I always Flash clean, so.. no dirty Flash for me^^]
Click to expand...
Click to collapse
Hi again You can stop Google from downloading the previous installed Apps at the first start. After Google Login you will be asked if you want to restore - just deny.
Don't know yet what you exactly mean with 4 rows in the same time.
Do you mean perhaps Toast Messages? There's for example an Xposed Modul called "Perfect Color Bar" - in this you can enable "Toast" with mixed compatibility. After you get instead of the the small black info messages colored ones with the symbol of the App message. There are also other "bars" on the Repo for customization that messages.
Do you remember which official firmware did you have before using Custom Roms like Gratitude? b317, b321a, or b370? I know, there were some modem updates coming with the official firmwares (which cannot be done with Roms on Huawei Phones)
Maybe you should update to officially Firmware as an step between before reflashing the Rom. For this you would need the Stock Recovery, which can flashed from K-Settings, more Settings. On xda you can find the b391 here:
https://forum.xda-developers.com/huawei-p8/how-to/firmware-huawei-p8-b391-gra-l09c432-gra-t3534020
It would refresh the Rest of your Phone (which cannot be reached by ROM) - and after the ROM can work as it should...
Just an idea
Thread is cleaned and no more support
I am very disappointed with all who ever using this ROM as a daily driver, I,m no more going to post here because my device Lenovo K4 Note (very good product from Lenovo) no more in working condition, so please don't expect any of help from me!
And of course, it is very sad that no one ready to help for development, but only a student forward to help me and I hold him!
Request:- My phone display not working properly, it is torn and very dark (water overflow on my phone), I have to change the whole display with the frame. I want to buy this...
https://www.ebay.in/itm/122848325615?aff_source=Sok-Goog
I ask everybody to contribute some money to buy the screen and to continue this development...
I will post the names with amount whoever contributed to above, in the second OP post
For details please send PM to me
Now onwards MIUI Global and MIUIPRO will be available here...
All the ROMs reworked and uploaded to Android File Host - All the builds available for all time
New build notifications will be announced in the Second post
Any other notification will be announced in the Third post
How to Flash the ROM
1. Reboot to recovery
2. Wipe
Format Data > yes
Advanced Wipe > select all and wipe (except USB OTG)
3. Connect to computer 'copy all your zip files' and 'miui_mm_recovery.img'
4. Install
Select Storage - select where you copied all files
5. Install Image
select 'miui_mm_recovery.img'
select partition to flash image
select 'recovery'
Flash it
6. Install Zip
Select ROM.zip and your sound mode
Flash it
7. Reboot to System
And now setup
How 'Magisk work in this ROM
1. After re-boot to your phone - setup all
2. Update all installed app in 'Play store'
3. Don't download and install any other app - only updates
Open Magisk Manager - it will ask for an update - DO NOT UPDATE!!!
Menu > Magisk Hide > tick - Google Play Store, Google Services Framework, Security and close
4. Go to Security on Home screen
tap on right corner wheel - settings > Security Scan > 'untick' Root and System update' and close
5. Security - Complete all cleaning and security update, 'If virus scan takes too long close it'
6. Go to 'Magisk Manager'
Tap to start SafetyNet check (asking for download - click 'OK' - Now - basicintegrity: true - ctsProfile: false
7. Reboot to recovery and flash safetynet.zip
8. Reboot to system
Tap to start SafetyNet check, Now - basicintegrity: true - ctsProfile: true
If something goes wrong or any problem with magisk 'Don't Worry'
1. Again flash your boot.img from ROM.zip and reboot system
2. Tap to start SafetyNet check (asking for download - click 'OK' - Now - basicintegrity: true - ctsProfile: false
3. Reboot to recovery and flash safetynet.zip
4. 100% you will be in Green and working magisk
Note: All is ok but magisk crash and won't open???
it is normal because we are using an old version
1. Don't open 'Magisk Manager' immediately after re-boot
2. Tap to clear all and reopen 'magisk'
I don't want Magisk
1. Unzip ROM
2. Delete 'MagiskManager' system > app > MagiskManager
3. Replace boot.img
4. Zip it using 7zip and flash
Here the boot.img without 'Magisk'
https://www.androidfilehost.com/?fid=890129502657579277
MIUI 9.2 - Global Here
https://www.androidfilehost.com/?w=files&flid=244376
MIUI 9.2 - MIUIPRO Here
https://www.androidfilehost.com/?w=files&flid=244372
Recovery Here
https://www.androidfilehost.com/?fid=962187416754456828
safetynet Here
https://www.androidfilehost.com/?fid=962187416754457058
Dolby Atmos Here
https://www.androidfilehost.com/?fid=673791459329052884
ViPER4Android
https://www.androidfilehost.com/?fid=889964283620757659
I want Both sound mode on my Device, go here ( which is working perfectly)
https://forum.xda-developers.com/android/software/mod-quasaratmox-ultimate-sound-mod-t3479705
F. A. Q
1. Why my phone screen is red or yellow in color?
Ans:- You have to change the 'Reading mode'
Settings > Display > Reading mode > "On or Off"
Settings > Display > Contrast & colors > Automatic contrast
2. Flight Mode or Change SIM card required re-boot, How to fix?
Ans:- New builds or not fixed about 'flight mode' due to
"Jio Video Calls" if you are not using JIO Video calls
here is the fix >'Delete' the following line in build.prob and reboot
mtk.eccci.c2k=disabled
ro.mtk_c2k_support=0
ro.mtk_srlte_support=1
mtk.md1.status=stop
mtk.md3.status=stop
ro.c2k.irat.support=0
ro.mtk.c2k.slot2.support=0
Now flight mode will work also not needed to re-boot while changing SIM-card
3. Magisk Manager is working but sometime won't open or crashing
ANS:- We are using old build of 'Magisk and Magisk Manager' this is the
it always asking to update - it is normal 'No worry'
Don't open 'Magisk Manager' immediately after re-boot
4. How to change 'Region' to my country and 'MCC, MNC' code?
Ans:- Edit build.prob and changes following to your country code
ro.miui.region=IN
ro.product.locale.region=IN
ro.miui.mcc=404
ro.miui.mnc=27
Refer here about your country code
https://en.wikipedia.org/wiki/Mobile_country_code
5. FM Radio is tuning but no sound?
Ans:- You have to grant permission for microphone - here you go
settings > permissions > permissions > microphone > FM Radio
and give permission
6. My loved or liked apps not working, even I download it from 'Play store'
Ans:- This is "MIUI" some app may not work, I don't have fix for those
Maybe it will work in next build "MIUI" developers need to fix it
7. What is the changes or changelog or difference?
Here you go...
http://en.miui.com/forum-109-1.html
8. Can I flash 'Custom Kernel'?
Ans:- 'Yes' and 'No'
Yes - if your custom kernel perfectly works with stock ROM
No - You will be lost 'Magisk' the boot.img is included 'magisk'
9. Which sound mode is perfect?
Ans:- This is up to your taste and hearing desire..
Flash only provided sound mode, and it working perfectly with this ROM
10. Call recorder not working properly?
Ans:- Forget about it, use ACR call recorder from 'Play store' which is working perfectly
10. I want to port your builds to my device, all is working except 'VoLTE', Help me?
Ans:- No- I can't help you, you have to work and compare all
The original source of MIUI
The ported Build of mine
The ported build original source of Lenovo Stock Rom - S232
Find the difference, and do it yourselves.
Lenovo K4 Note
Reserved
Lenovo K4 Note
Reserved
man,no words are coming from my mouth after seeing this,Really Thanks a LOT,Ill never forget this.
Sir please tell me the installation process clearly sir... I'm still waiting to install this rom...
Boot to recovery
1. You must be in Marshmallow recovery
2. wipe all ( format data and advance wipe all) do a factory reset
3. Install the ROM zip
4. Reboot system
It will take about 5 min to boot
Thats all, setup and enjoy
What about gapps sir???
---------- Post added at 03:29 PM ---------- Previous post was at 03:14 PM ----------
Recovery - Mohancm sir's right???
Wipe all and advanced wipe and format data right???
No need everything is there just flash the Rom zip
Yes @mohancm marshmallow recovery will work
Thanks Sir!!!!
No bugs so far... Running smoothly!!!
Thanks alot macblaze u r awesome
Good Work!! @macblaze , will fix on my epic rom based on miui9
Thank you , good work men .
radio works?
Thanks
So far so good, only can't find NFC but how do i install magisk in this rom?
NFC work?
mamoramo said:
NFC work?
Click to expand...
Click to collapse
no nfc
---------- Post added at 04:24 AM ---------- Previous post was at 04:18 AM ----------
hora123 said:
radio works?
Click to expand...
Click to collapse
Radio is not working
bug
I can not send photos / audios in whatsapp. "File format is not supported" please correct
stanio said:
I can not send photos / audios in whatsapp. "File format is not supported" please correct
Click to expand...
Click to collapse
I think its just u, check permissions