HI All !!!
Now -> Update Archos ICS Firmware 4.0.6 , based on Stock Firmware 4.0.6 !
This Rom is rooted, busybox installed and have tun.ko module ...
This update removes some random FC , screen freeze and random reboot !!!
Works on all tablets gen9, seems to be more stable than stock firmware 4.0.6 and can be used as a daily ROM !
Kernel was updated with this two patchs => (http://forum.xda-developers.com/showthread.php?t=1633465&page=4 ) BIG THANKS Mr. Courville !
These stock applications have been updated : Books, Market, Google+, Street, Maps, Music2, Gmail .
These are the files you need to install the Update :
- archos.ext4.update -> in archive "406_update.zip" => https://hotfile.com/dl/156241977/239b586/406_update.zip.html
- zImage and initramfs -> in archive "kernel_update.zip" => http://www.2shared.com/file/KwL0giqb/kernel_update.html
Installation :
- copy archos.ext4.update into Internal Storage ( /mnt/storage )
- reboot into SDE menu and under Developer Edition Menu , Flash Kernel and Initramfs : copy zImage and initramfs.cpio.lzo on the new driver that appears on desktop/laptop ;
- ok ! and wait for reboot your devices : after reboot you can see Android update system for a while .....be patient !
In this Update we do not have custom "bootanimation" , no extra apps added ( except Rootcheck ), anything else in addition to stock firmware 4.0.6 !!!
regards,
Surdu Petru
Thank you for your good work for the gen9.
I had no FC with the first rooted 4.06, but the wifi disconnects sometimes in standby. Would you prefer to update even if I had no FC till now?
I can not see a downloadlink ...
Sent from my ARCHOS 80G9 using XDA
Kenomann said:
Thank you for your good work for the gen9.
I had no FC with the first rooted 4.06, but the wifi disconnects sometimes in standby. Would you prefer to update even if I had no FC till now?
I can not see a downloadlink ...
Sent from my ARCHOS 80G9 using XDA
Click to expand...
Click to collapse
Hi !
For me in the stock firmware 4.0.6 version I had a lot of random restarting !
- with this update , all seems to be OK !
If you do not have FC, and random reboot , you not need to update .....only if you use the VPN service.
Thank you for you work surdu_petru.
I had occasional random reboots after a freeze so far, so I'll give the update a try.
Thanks for your work !
I will test it this Week-End ...
Flashed it and it works, but now I encountered this problem.
If you do a full wipe from the Settings menu, the device freezes while booting. It's not a bootloop, just completely freezes on the Archos bootlogo.
Same thing happens when I then try to reboot from the Recovery menu, or even Format System and Reset Android and Storage. Boot freeze....
Any idea on this?
I have a 80G9
Is not possible oc with this rom.
neoadn said:
Is not possible oc with this rom.
Click to expand...
Click to collapse
Hi..
sorry ! , not yet ....
Liebaart said:
Flashed it and it works, but now I encountered this problem.
If you do a full wipe from the Settings menu, the device freezes while booting. It's not a bootloop, just completely freezes on the Archos bootlogo.
Same thing happens when I then try to reboot from the Recovery menu, or even Format System and Reset Android and Storage. Boot freeze....
Any idea on this?
I have a 80G9
Click to expand...
Click to collapse
Hi!
You can try "Format System" -> "Reformat Device" -> OK ! , install stock 4.0.6, than -> copy archos.ext4.update in /mnt/storage/ go to recovery -> Recovery System -> Developer Edition Menu -> Remove Android Kernel -> Developer Edition Menu -> Flash Kernel & Initramfs , copy here zImage and initramfs , Ok! - good luck !
surdu_petru said:
Hi..
sorry ! , not yet ....
Click to expand...
Click to collapse
Ok, np surdu. Nice rooms the best!
no fc's and reboots in 13 hours stresstest (governor hotplug mode!). i had before up to 3 in one hour. seems much better now!!
thanks :thumbup:
4carlos said:
no fc's and reboots in 13 hours stresstest (governor hotplug mode!). i had before up to 3 in one hour. seems much better now!!
thanks :thumbup:
Click to expand...
Click to collapse
13 hour stresstest! wow that cannot be good for your CPU. was your tablet hot afterwards?
still a lot off crashes and reboots expecially using opera, veetle, sopcast etc. even a simply game like angry words freezes the tablet (when one is moving a tile..), pity. ciao
Shano56 said:
13 hour stresstest! wow that cannot be good for your CPU. was your tablet hot afterwards?
Click to expand...
Click to collapse
mmh, maybe stresstest is the wrong word in the conservative meaning. what i mean is, heavy usage of my favorite applications like adobe reader, dolphin hd, kindle, moon+ reader, stock browser, greader pro, kaiten mail, vs tv, softmaker office mobile (crashes 2 times, because beta i guess), calendar, meridian pro, pinball, picsay pro, raging thunder, titanium backup, skype, upnplay, google play store and some german news apps with a lot of video contents like zdf mediathek, tagesschau, heute and so on. all applications crashes after a while before update. seems, after update my main apps running stable now. btw. it's not only a gamepad (only for fun and relaxing) you see. my hotspot is information, working, watching tv/video and communication. i think, a real 'stresstest' (running cpu instructions in a loop thousands of times) is not close enough to my daily usage. i'm not a fan of overclocking (reduce life of hardware) only to get more speed.
beside this, i realized that skype has problems with audio now. i cannot receive any voice with audio and video calls. my counterpart can hear me, but my speaker keep silent. what a pity. until is fixed, i use reelportal to talk with my kids.
for my purpose it's much much better now. i have got many fc's/freezes/reboots while scrolling in contents when i used governor hotplug.
@hitman72:
opera crashes since honeycomb on my tablet and on my phones (pls see opera forum for all the pain ). it's not a really good reference. i use dolphin instead. not all fc's are caused by archos i mean. many apps in play store have a low quality and not really ported to ics hd. i don't except bugfree software all over.
FW work on HDD models?
Thanks!
gegabit said:
FW work on HDD models?
Thanks!
Click to expand...
Click to collapse
all G9 yes...including your HDD model
Related
F1 CyanogenMod 7 V1
This is my CyanogenMod 7 build based on the latest CyanogenMod RC4 base. I have fixed a lot of bugs in this build. This build is very stable and fast.This build also includes the theme manager from which you can customize your device a lot.Don't forget that orignal CyanogenMod is in still RC4 so dont blame me for the bugs. I suggest you to open all apps and sync your account with Google on the first boot and then reboot your device for the best speed. First boot will be slow and wait up to 2-3 mins when reached on setup wizard to let Android fully settle down. This build is fully ROOTED and SuperUser is installed. In this build market, Gmail and browser will not work due to skia bug which is common in CM builds and some web based apps will not work but the system is pure stable and very fast. My the beta releases builds will be from V1 till V1.9. WiFi is better and Battery is optimized.
[Guide on how to create an EXT2 partition]
Build: CM7 RC4 [Gingerbread 2.3.3]
Kernel: Duckly's Turbo Kernel 25 Mar 11 (Keypad drivers not as modules)
Change log [5-4-11]
Fixed phone calling.
Fixed Neocore Textures problem.
Fixed Stock Keyboard.
Auto-rotation in display settings will be automatically disabled.
Auto-backlight in display settings will be automatically disabled.
Screen On / Off animation in CyanogenMod settings will automatically be disabled.
Fixed Gallery bug.
Added 2D Gallery.
Added Launcher Pro 0.8.4.1
Added OI File Manager 1.1.4
Removed Browser and Gmail.
Working:
SuperUser
WiFi (Perfect - No disconnection)
GPS
3G Network
3D [24.1 FPS Without Sound]
Phone
SMS
Very Good Battery Life
Smooth Animations
Backlight Control
Market (New)
Navigation
Google Maps
Overclocked to 652MHz [If you get boot or crashing problems lower the OC value]
Landscape Support
Not Working
Bluetooth
Due to Skia-Bug Browser, Gmail and Market are not working. (Use opera mini, its fully working)
Note:
You may also try to use SetCPU to increase battery life.
First Boot will take some time.
Don't touch the phone for 2-3 mins when reached on setup wizard.
Buttons Layout:
X Panel Button = Home Button
OK Button = Back Button
Left Softkey = Menu Button
Right Softkey = Standby & Lock Button
Call Button = Dialer Button
Call End Button = Standby & Lock Button
Volume Buttons = Volume Buttons
Power Button = Standby & Lock Button
Instructions:
Unpack the Zip file copy all the Files in the root of the FAT32 partition this will be the only partition you will see in the my computer. Then go to file explorer then in storage card then into the npkinstall folder then run haret this will install files on the EXT2 partition. Then it will automatically restart after you restart back into the windows mobile go into file explorer then storage card then run haret which is in the root of the sd-card not the one in npkinstall folder and just wait and it will boot.
Credits:
Thanks To NEOPEEK
Thanks To Duckly
Thanks To Chann
Thanks To XDANDROID
Thanks To Bruno_123
Thanks To Benquick
Thanks To Midnight
Thanks To Preston74
Download
If you want to support my work,
***********Reserved**********
##########Reserved##########
it is faster then this one ?
downloading it
ncw2k69 said:
it is faster then this one ?
downloading it
Click to expand...
Click to collapse
Yes its faster then that one.
First I noticed the FAST speed In my opinion it's the fastest and until now I had just one SOD (I think it was an SOD) and no error or sth
Thanks to Neopeek for this awesome rc of cyanogenmod and all guys who made that real
I am waiting for newer and better?!?! ROMs
And with this version i could imagine a NAND version
Edit: I noticed that the market is missing?
Tomorrow going to release V1.1!
great news
Any drastic changes faryaab in v1.1 or are you gonna just exclude gapps?I wanna try v1 so just wondering what will you change and also what gralloc and 3d driver are you using in this build.Thanks for your work.
hi all ur ROM is awesome but i have one problem in android music player and image viewer not shown any file which are heaven in my storage card pls solve my problem
hi faryaab please make live wallpaper in your rom. this is beautiful
Faryaab,
This is an amazing build. Do you think you will be able to remove the Skia bug at some point so that the stock browser and gmail work?
Thanks for your work on this!
bobo12 said:
Faryaab,
This is an amazing build. Do you think you will be able to remove the Skia bug at some point so that the stock browser and gmail work?
Thanks for your work on this!
Click to expand...
Click to collapse
amazing work man , really perfect but the internet over mobile (GPRS) not working for me ! can you fix it
No, GPRS working fine !
Select Settings > Wireless controls > Mobile networks > Access Point name
Press Menu and select New APN
Configure the settings based on your telecom provider
Faryaab - why you delete languages from this ROM? >.<
you share version with polish language?
Hi all! as I said on neopeek forum, I got this tested but can't write with my AZERTY keyboard, when changing the startup file hardkeyboard doesnt work (only 2rows) + I want to see the words propositions when typing in landscape, how do ? can someone help me? thanks!
Update for Faryaab: SO far, I've had one sleep of death along with the keys freezing (twice now)... For some reason I'm also missing market, I tried to reinstall with ADB but I couldn't find the correct drivers. Any help?
EDIT: Nevermind... I reread the first post... any chance you can fix Market?
Thanks!
Why?
why almost everytime my xperia enter on the stand by mode, when i try to wake up it doesn't wake!?? (is this the 'sleep of death'?)
obs: will any chance of put portuguese language?
thanks
maikonzinho said:
why almost everytime my xperia enter on the stand by mode, when i try to wake up it doesn't wake!?? (is this the 'sleep of death'?)
obs: will any chance of put portuguese language?
thanks
Click to expand...
Click to collapse
That would be the sleep of death yes... this is happening with this build to you too? It happened to me once as well... Waiting for Faryaab's thoughts on it.
i got also sleep of dead. i cant test my 3g setting becouse i have no browser. also i miss the market i want to dload some apps. hopefully you make a good rom whit market,good calls, included more langauges (included dutch), no freeze keys and sleep of death i can use the rom daily. i like the themes from this rom much better then the others.
nice work!!
This is based on P7500XWKHD Galaxy Tab 10.1 / HC 3.1 ROM but it is for the P7100 tablet.
Please read the whole thread before you flash
Flash on your own risk. I cannot be held responsible for any damage caused to your tab
This is not all my own work, I have worked with other members to get this ROM working.
kernel is provided by pershoot - compiled it myself to include turn.ko and cifs.ko - all kernel work is from here
first-time users you need to wipe! use supplied wipe script. Please read carefully, everything is here to get it flashed onto your TAB, if you do not understand what to do, ask, we will gladly try and assist.
Copy the downloaded files to sdcard (/sdcard/) and flash via ClockWorkMod
As always backup your data / apps before doing this! I use Titanium backup, search for it in the market.
Please read the thread before you report a bug. don't report already reported bugs. keep the thread clean. use xda's search feature
You need unlocked bootloader, click on link to see how to unlock.
You need root, click on link to see how to root.
Note: you should have Samsung Kies installed, or device drivers, for adb to work! It seems a lot of people do not have it installed, which causes a lot of confusion.
You need ClockworkMod Recovery (it is part of ROM Manager), download ROM Manager from market to install ClockWorkMod.
If you are a new to this please read this guide: http://forum.xda-developers.com/showthread.php?t=1232664, on how to unlock and root your TAB.
Features
Honeycomb 3.1 Based on P7500XWKHD ROM for the P7500, it will report as a P7500 but it is a P7100. Cannot change it to P7100 then some applications do not work.
Samsung TouchWiz UX UI
Camera application with modification for full 8mp photos and full hd 1080p video capture.
allows OC up to 1.4Ghz kernel, based on pershoot kernel compiled to include the following modules: ntfs.ko, tun.ko, cifs.ko
Kies via Wifi works on latest Kies in windows
Zipaligned
Deodexed
Voodoo sound improvements (Download voodoo from Market)
[/LIST]
See second post for latest modem.
Bugs
Wakeup issues, happens to some users.
Thanks to:
pershoot, for getting the kernel working! He is the MAN! He worked nights to get the kernel working on the 10.1v, with not even having the device!
SEO, He has assisted me a lot over the last couple of months!, if it was not for him I could not have done this
To the community that got me into this without them I would not have been able to do this.
Changelog:
1.03v : Latest Kernel update from pershoot, fix some SoD issues.
1.03v : Latest Superuser and su
1.02v : Fix force closure’s on Camera and Video. Thanks to polpo71 for the letting me know of the error, should have fixed this in the initial release.
1.01v : New SuperUser.apk ver 3.0
1.01v : Fix Sound on headphone level, kernel fix. Thanks to seo.
1.000 : New base.
0.xxx : See second post for older changelog on older base.
Download:
- 1.03v update
- please flash the "WIPE" zip, TB Galaxy WIPE script (SEO's), required for new users coming from stock. This will FACTORY RESET your tab but /data/media(sdcard) (your music, pictures & videos) will be left intact.
- this will NOT factory reset your tab if you're not on older version of this rom
All files available from this post. http://ismaakit.com/blog/
Kernel sources
Please do not link directly to the files, use this thread if you want to link.
Latest Official buke2 Modem:
adb reboot bootloader
fastboot flash modem modem.bin
fastboot reboot
YOU DO THIS AT YOUR OWN RISK!
Modem.bin
-------------------------------------------------------------------------------------------------------------------
TIP: Enable USB Charging
Code:
adb shell
cd /sys/class/power_supply/battery/
echo 1 > force_usb_charging
To disable it:
Code:
adb shell
cd /sys/class/power_supply/battery/
echo 0 > force_usb_charging
b.t.w. a couple of users has asked why not default?
I DO NOT LIKE THE IDEA OF CHARGING THE BAT FROM USB, IF IT WAS SUPPOSE TO DO THAT, IT WOULD HAVE BEEN ENABLED, but that is me, you are welcome to do it if you wish.
This is active until you reboot. Then you will have to redo.
-------------------------------------------------------------------------------------------------------------------
TIP: IF YOU MAYBE LOOSE ROOT IF YOU RESTORE A ROM, TO GET ROOT BACK JUST DO THIS:
Code:
adb remount
adb shell chmod 6755 /system/bin/su
-------------------------------------------------------------------------------------------------------------------
Extras for ISI-GALAXY 1.x
Theme:darker status_bar.
Restore to original.
--------------------------------------------------------------------------------------------------------------------
Please do not link directly to the files, use this thread if you want to link.
-------------------------------------------------------------------------------------------------------------------
[MOD] CirclesMod / HooolmGlow for ISI-GALAXY 1.1x
http://forum.xda-developers.com/showthread.php?t=1240597
Download here: http://ismaakit.com/rom/theme/HooolmGlow_GT-P7100_isiGalxy10v_b004-signed.zip
Restore: http://ismaakit.com/rom/theme/HooolmGlow_GT-P7100_isiGalxy10v_restore.zip
Thank you to Hooolm for the MOD, You can vist him here: http://circlesmod.dk/
---------------------------------------------------------------------------------------------------------------------
Older Base [P7500XWKG9]
Changelog:
0.8 : kernel update - pershoot
0.8 : usb kernel fix - isimobile/seo
0.7 : kernel update - pershoot
0.7 : kernel modules tun.ko and cifs.ko included
0.6 : incorrect 3g data counters fixed - seo
0.6 : sleep of death fixed (could still happen but in very very rare cases) - seo
0.5: new kernel from pershoot. Fixed hopefully sleep of death, please report back. kernel fix from seo. thank you pershoot and seo! update 0.5v containt fixes from 0.4v, please see full post for details.
0.4: new kernel from pershoot, thank you! new camera app from seo. battery drain fixed, battery annimation fix
0.3: new base XWKG9, new kernel from pershoot, thank you!, new camera and email app from seo. ROM is now Deodexed and zipaligned, 3g drop fix and battery drain fix
0.2: first public release
0.1: internal
Download:
- 0.8v update
- please flash the "WIPE" zip, TB Galaxy WIPE script (SEO's), required for new users coming from stock. This will FACTORY RESET your tab but /data/media (your music, pictures & videos) will be left intact.
- this will NOT factory reset your tab if you're not on older version of this rom
All files available from this post. http://ismaakit.com/blog/
Bugs
If MEDIA SERVER have high cpu usage on battery stats. Fix do this: go to settings -> applications -> manage applications -> all -> com.sec.android.providers.download -> clear data
Reboot after unplug of usb adapter - fixed
"Sleep of Death", sometime when the tab goes to sleep it does not wake up when you press power. Almost - latest kernel should reduce it. Workaround - Press power until Tab boots.
Battery drain issue
3g losing connectivity when going to sleep. Fix unknown. do not flash modem.bin as previously suggested, error still occurs Fixed in 0.3
Busy working on the fix... Will release a new ROM soon. You can flash the kernel from seo rom, it fixes the problem. Will Release one with pershoot's kernel, soon. Done
If you experience battery drain, please let me know. Also if you go to Settings -> Applications -> Battery use. It will list apps that was using battery. Take a screenshot and post it.
Kernel sources
-------------------------------------------------------------------------------------------------------------------
0.8v Extras
Theme:darker status_bar.
Restore to original.
--------------------------------------------------------------------------------------------------------------------
Please do not link directly to the files, use this thread if you want to link.
For those of you who want's a GUI File Manager to Linux, A command line + GUI (GTK based) Android ADB-based file manager https://github.com/sole/aafm
---------------------------------------------------------------------------------------------------------------------
To be able to send SMS you can flash the 7500 modem image. Download the file to disk and then do this:
adb reboot bootloader
fastboot flash modem modem.bin
fastboot reboot
YOU DO THIS AT YOUR OWN RISK!
Tank you verry much for this great ROM. After flashing the update to 0.4 yesterday this Rom kick ass. Great work. The update fixed a lot of small little things in the Rom as well. Eg. When I power of the device and then back on the alarm stays as I previously had to reset it every time the Rom booted. Also the problem with the battery drain seems to have dissapeard. Exelent job man. I would say the 10.1v is now working at 100% after the update.
Sent from my GT-P7500 using XDA Premium App
undead_za said:
Tank you verry much for this great ROM. After flashing the update to 0.4 yesterday this Rom kick ass. Great work. The update fixed a lot of small little things in the Rom as well. Eg. When I power of the device and then back on the alarm stays as I previously had to reset it every time the Rom booted. Also the problem with the battery drain seems to have dissapeard. Exelent job man. I would say the 10.1v is now working at 100% after the update.
Sent from my GT-P7500 using XDA Premium App
Click to expand...
Click to collapse
Exellent............
Does this ROM include tun.ko ?
nardusg said:
Does this ROM include tun.ko ?
Click to expand...
Click to collapse
No Sorry. I could look into it.
Please see post 2 for a black status bar.
Do we apply the zip with CWM to get the dark taskbar ?
Work great
Samsung Galaxy tab P-7100
redhat37 said:
Do we apply the zip with CWM to get the dark taskbar ?
Click to expand...
Click to collapse
Yes, you would flash it via cwm, like a ROM.
isimobile said:
Theme:darker status_bar.
Restore to original.
Please do not link directly to the files, use this tread if you want to link.
Click to expand...
Click to collapse
Absolutely awesome !!! Thanks for this.
Any users experiencing wake-up issues? Maining when the tab goes to sleep it does not want to wake-up.
Send from my GT-P7100
isimobile said:
Any users experiencing wake-up issues? Maining when the tab goes to sleep it does not want to wake-up.
Send from my GT-P7100
Click to expand...
Click to collapse
No wake up issues as of yet, my only issue which I just encountered was the TAB wouldn't connect to 3G network. Said please insert SIM. Rebooted and all is okay.
I also experienced it a couple of times, but also on stock 3.01. I think it is a device issue, not a ROM issue, but I can be wrong.
Send from my GT-P7100
isimobile said:
Any users experiencing wake-up issues? Maining when the tab goes to sleep it does not want to wake-up.
Send from my GT-P7100
Click to expand...
Click to collapse
Indeed, also wake-up problem. Did not have it before, meaning on v 0.3.
I have none of these issues..... My device wakes up fast it always detects my sim. Even the screen response is fast. Plays video and music with no problems. No connection probs. All and all tihis rom is the best out there. My battery lasted more than 10 hrs yesterday. I was using the device the whole day yesterday. Battey annimation while charging works well again. Seems the device is also lighter on recources (ram). Exellent rom.... Thank you for your great work!
Sent from my GT-P7100 using XDA Premium App
undead_za said:
I have none of these issues..... My device wakes up fast it always detects my sim. Even the screen response is fast. Plays video and music with no problems. No connection probs. All and all tihis rom is the best out there. My battery lasted more than 10 hrs yesterday. I was using the device the whole day yesterday. Battey annimation while charging works well again. Seems the device is also lighter on recources (ram). Exellent rom.... Thank you for your great work!
Sent from my GT-P7100 using XDA Premium App
Click to expand...
Click to collapse
Same device same result, all works great
Sent from my GT-P7100
sorry for stupid question
i have rooted and installed ClockworkMod from rom manager but i haven't unlocked bootloader yet. So I can install this rom?
By the way, what is "unlocked bootloader" for?
thanks so much (i hope i will have answer)
http://forum.xda-developers.com/showpost.php?p=16793670&postcount=1492
lucky58 said:
Indeed, also wake-up problem. Did not have it before, meaning on v 0.3.
Click to expand...
Click to collapse
Please try the new kernel here. http://droidbasement.com/db-blog/?p=2295
I am not near a pc at the moment to update to 0.5, with new kernel. Will do it later. This should fix the wake issue if you had it.
Send from my GT-P7100
Disclaimer:
This ROM is currently in development stage.
Most things work, but there are few things that don't work and the device is slow.
Make sure you have a nandroid backup of your existing ROM before you flash this.
I know most of you guys are coming from CM7, so don't compare with it, as this is still an experimental build
Here is the CM9 (un-official) for Tattoo,
For chanages please refer to Gerrit
Download links
2012-07-10
http://www.mediafire.com/?tbvqxgtyyp484yn
Previous versions
2012-06-30
http://www.mediafire.com/?iibqddpd92sx288
2012-06-23
http://www.mediafire.com/?1vjdeanp24dvz3d
Click to expand...
Click to collapse
Gapps link
get latest gapps from http://goo-inside.me/gapps
Installation instructions
Wipe cache and data
Flash from recovery (Clockworkmod recovery only)
First boot takes about 5 to 8 mins
Framework, few apps and Dalvik-cache are moved to cache partition.
Credits
to following guys, without whom this ROM was not possible
Arco68 - for his invaluable work on Tattoo and Wildfire - his vendor config, kernel and lot of tweaks for ArmV6 are used for compiling from source and for his continuous support
ErwinP - for his collection of tweaks and the guys involved in them, which are used for CM9 compiling - check his github
Furious anger (helped in compiling CM9 from source)
CyanogenMod team
Zackconsole (helped in fixing touchscreen and audio issue),
Arif-ali
jaybob413 and his thread
TeamICS
mikegapinski
unforgiven512
and many others
here is my git for device config and notes for compiling
https://github.com/rallapag
What's working
Touchscreen
GPS
Wifi
Mobile and data
USB Mount
Sensors
Audio and
Rooted
What's not working
Camera
Bluetooth - working partially
some apps are force closing at the moment (not every time)
Gallery Not working
Live Wallpapers from CM9 are not working due to GPU requirement - so are removed,
Live Wallpapers from from market are working
And all bugs reported by users
Temporary fixes
See second post
Click to expand...
Click to collapse
Tricks to deal with some issues:
FM radio: Use SpiritiFM app from market
Turn bluetooth on before first start of SpiritFM
Settings -> Audio -> Method -> msm7x30
Settings -> Debug -> FM Chip -> TI(Motorola)
Settings -> Debug -> select use fm_hcitool
restart the app, and remember to turn media volume down.
Gallery: Use Quickpic app or
Just pictures app(thanks KingCreole)
Video player: Use MXplayer and MXplyaer ARMv6 codes from market
Preferences -> Decoder -> select S/W Decoder
Launcher alternative:
Launcher pro is very good replacement for memory hog Trebuchet launcher
Nova launcher is another one to try.
GPS location:
Use Fasterfix app to change the server to your region and location gets locked faster.
latest Gmail apk
This patch is only for Wildfireport - is removed
patch for minor graphic improvement - cm9-click-20120305-patch.zip
please flash the patch from recovery
Screenshots
Microphone does not work yet.
or?
pipko said:
Microphone does not work yet.
or?
Click to expand...
Click to collapse
Did you try the ROM posted in this thread??
donwloaded, istalled, but it desnt starts.
when booting, shows "tattoo" then a animated image and stays there forever!
marcolameirinhas said:
donwloaded, istalled, but it desnt starts.
when booting, shows "tattoo" then a animated image and stays there forever!
Click to expand...
Click to collapse
first boot takes about 5 to 8 mins.
rallapag said:
first boot takes about 5 to 8 mins.
Click to expand...
Click to collapse
ok, will wait!
there is nothing i should do before installing the rom?
its just the "usual" way?
i'm not a pro in this stuff
marcolameirinhas said:
ok, will wait!
there is nothing i should do before installing the rom?
its just the "usual" way?
i'm not a pro in this stuff
Click to expand...
Click to collapse
wipe cache and data..than flash rom..wait the first time about 10minutes..then you can use the rom.
installed. Its not fast, but is not that slooooooooow.
it crashed sometimes, not always booted, but it was nice to test it!
waiting for new and improved versions
marcolameirinhas said:
installed. Its not fast, but is not that slooooooooow.
it crashed sometimes, not always booted, but it was nice to test it!
waiting for new and improved versions
Click to expand...
Click to collapse
More work shall be done and will make those apps more stable as they should soon as current i and rallapag are working on them now just RC0
marcolameirinhas said:
installed. Its not fast, but is not that slooooooooow.
it crashed sometimes, not always booted, but it was nice to test it!
waiting for new and improved versions
Click to expand...
Click to collapse
If you use launcher pro it is very responsive
Dev :
Pushing this might help :
(system)
App http://www.mediafire.com/download.php?qculj816xcbz23c
Framework http://www.mediafire.com/download.php?k41wpb1cd5e62ht
Push this might help?
Libandroid_runtime.so http://www.mediafire.com/download.php?tgf42qk2nfegp09
Try out
Zackconsole said:
Pushing this might help :
(system)
App http://www.mediafire.com/download.php?qculj816xcbz23c
Framework http://www.mediafire.com/download.php?k41wpb1cd5e62ht
Push this might help?
Libandroid_runtime.so http://www.mediafire.com/download.php?tgf42qk2nfegp09
Try out
Click to expand...
Click to collapse
nerver done that before! its safe to do it? and how?
Flashed it, will test everything. Too bad the mic is not working, hope for a fix...
kemoba said:
Flashed it, will test everything. Too bad the mic is not working, hope for a fix...
Click to expand...
Click to collapse
The mic is working just fine
Testing right now, I will take a video later
Few problems I had;
- Wifi didn't connect (GB does connect)
- Every time I rebooted I had to give in my sim password +-17 times before I got to the home screen
And eventually it didn't booted up anymore (stuck on bootanimation)
Nice to see there is still new development for this oldie tho
My tattoo was the last place I thought to see ICS running on,,
Keep up the good work!!
Hitmax117 said:
Few problems I had;
- Wifi didn't connect (GB does connect)
- Every time I rebooted I had to give in my sim password +-17 times before I got to the home screen
And eventually it didn't booted up anymore (stuck on bootanimation)
Nice to see there is still new development for this oldie tho
My tattoo was the last place I thought to see ICS running on,,
Keep up the good work!!
Click to expand...
Click to collapse
There is a problem with your Tattoo. I have just made a video and wi-fi connected. I opened few sites.
I have removed the SIM password on boot, try. After all, I will stay with ICS
marcolameirinhas said:
nerver done that before! its safe to do it? and how?
Click to expand...
Click to collapse
FOR DEV ONLY
Push to system by adb n chmod 644
Sent from my LT18i using xda premium
Hi all !
Rom => The Last Archos ICS Firmware 4.0.7 - Root version - based on Stock Archos ICS Firmware 4.0.7 !
Upadte 16-07-2012 - to fix some touchscreen issue ( not solved - seems to be also in Official Archos Firmware !)
This Rom should be work for all Archos G9 ....but you need activate SDE menu !
In this Rom original files have not been modified, only was added "su" , "Superuser.apk" !
All improvements to the original Firmware 4.0.7 , you can also find in this Root version .
Firmware changes
Version 4.0.7 - June 19th, 2012
Applications: fix no audio when launching video capture impacting applications like Skype
Display: graphics performance enhancements
Hard drive based products: avoid potential loss of hard drive when 3G USB port is switched on with no peripheral attached
Wi-Fi: fix some more disconnect cases happening on some access points
This Root version works on all tablets gen9, is stable and can be used as a daily ROM !
These are the files you need to install Root Version :
- archos.ext4 in archive : archos_407.zip
- zImage and initramfs.cpio.lzo in archive : Kernel_407.zip Mirror : kernel_407.zip - 4.72 MB
Installation :
- copy archos.ext4 into Internal Storage ( /mnt/storage )
[*]- reboot into SDE menu and under Developer Edition Menu ,( remove Android Kernel if available) than Flash Kernel and Initramfs : copy zImage and initramfs.cpio.lzo on the new driver that appears on desktop/laptop ;
[*]- ok ! and wait for reboot your devices : after reboot you can see Android update system for a while .....be patient !
In this Rom we do not have custom "bootanimation" , no extra apps added , anything else in addition to original !!!
For all those who want a proper use (without touchscreen issue) ....please check this thread ! Thanks !
regard,
surdu_petru
Thanks for your work!
Nicee Will download hand try in a few hours
Sent from my HTC One X using xda premium
Downloading now, thanks surdu_petru
Is VPN support present?
zando2712 said:
Is VPN support present?
Click to expand...
Click to collapse
Hi!
You can check lib/modules/ to see if is there tun.ko module !!!
I installed firmware before you responded.
Thank you surdu_petru!
VPN support is in.
Browsing to lib/modules/ I see no tun.ko though.
should not be ....
should not be ....
I continue riding the loop
practice in the installation, the tablet starts but if I turn it off at the next reboot would always live as if part of the new rom (upgrade Android ...)
retraced to 4.06 waiting for better times
thanks
miki8989 said:
should not be ....
I continue riding the loop
practice in the installation, the tablet starts but if I turn it off at the next reboot would always live as if part of the new rom (upgrade Android ...)
retraced to 4.06 waiting for better times
thanks
Click to expand...
Click to collapse
....I'll reupdate now the initramfs !
Thanks !!!
Ok ! Now you can re-download kernel.407.zip and re-flash !!! Good luck ...
tanks
Greetings,
After upgrading to 4.0.7 GMail crashes at startup: "Unfortunately, Gmail has stopped".
Anyone else experience this problem?
4.0.7 installed and working as expected!
abel.e.pereira said:
Greetings,
After upgrading to 4.0.7 GMail crashes at startup: "Unfortunately, Gmail has stopped".
Anyone else experience this problem?
Click to expand...
Click to collapse
Hi!
...do you updated on the market the latest version ?
surdu_petru said:
Hi!
...do you updated on the market the latest version ?
Click to expand...
Click to collapse
Hello,
I missed the GMail upgrade :-|
Working fine after upgrading. You're the man!
Thanks for the tip and the super quick reply.
thanks
works perfectly
resul quadrant
cpu - 6809
mem - 2459
i/o - 1116
2d - 990
3d - 1612
total - 2597
with fly overclocking
you can do nothing for the market that does not load some app (antutu, amazon etc..)
I tried changing the build.prop but even if the device is seen from a google samsung, the app will still not be compatible
grazie
Hi, I need a root rom with a kernel that supports "loop devices". Does this kernel update support "loop device"? Thanks in advance.
Best.
Nice, this firmware worked.
But are you not allowed to factory reset after using this? After factory reset I can't boot anymore.
GPS now working
Thanks for this Surdu. Can confirm that both the Archos stock and this ROM are compatible with GPS now (I get instant locks). I am a happy man.
BTW, is the kernal you included all the G9 to overclock? I have a 4460 and am getting quadrant score of 1781 with a max and min @ 1.2 GHz (Performance Governor).
Thanks,
smithmal
thanks again for your work surdu
is it possible to activate the bootanimation? i remember that it works in earlier firmwares.
just GREAT !
http://www.jbmm.fr/?p=28311
Hi to evryone !
The last Archos update for 80/101 Gen9 ( 25/10/2012 ) : Android 4.0.4 Firmware 4.0.25 with Root access !
This Rom is based on unmodified Android system , Archos Firmware 4.0.25 !
This Rom can be installed only if you have already enabled SDE on your tablet .
Change log :
Android: IceCream Sandwich 4.0.4 version
Media Center: network indexing on network shortcut menu (+), network shortcuts creation is proposed on network share directory long press
Media Center: new simplified Movie/TV Shows/All Video views
Media Center Video: new video information view with backdrop display and chooser (click on backdrop to change it)
Media Center Video: poster can be changed by clicking on it in the video Information view
Video Scraper: faster media information retrieval process. Note that in the migration process, all your video scraper information will be lost.
Subtitles: ability to download and save subtitles for network shares
Media Center: add video search
Media Center Music: Album art swipe gesture support
Remote control: control your tablet with your TV remote through HDMI on TV compatible hardware (directional pad, multimedia and color TV remote keys)
Archos Remote: support of remote touch pad
Wi-Fi: new more robust driver
Media Center Video: fix audio desync for some MPEG4/AVI files
Media Center Video: fix MPEG PS/VOB audio track selection
Media Center Video: fix UPNP playback of large files (>4GB)
Media Center Video: fix seeking in some TS files
Media Center Video: fix playing certain MKV files
Media Center Video: fix playing certain H264 files
Media Center Video: improve DVD/VOB playback in case there are IFO files present
Media Center Video: add support for MPL2 subtitle format
Media Center Video: improve playback of H264/AAC TS files
& also ...
increase data I/O
enabled init.d* to run scripts
Download :
please download from here all necessary files :
archos.ext4.update
zImage
initramfs.cpio.lzo
Stock_Root_4.0.25.zip - 206.48 MB
Installation :
connect USB cable ;
unzip Stock_Root_4.0.25.zip into Stock_Root_4.0.25 directory
put archos.ext4.update from (Stock_Root_4.0.25) in your device, or > adb push archos.ext4.update mnt/storage/
go to recovery SDE and Remove android kernel if you have already installed any official firmware !
go to Flash kernel & Initramfs and copy here zImage and initramfs.cpio.lzo from (Stock_Root_4.0.25)
Ok ! ... & wait to boot !
* just put your favorite scripts in init.d directory , and reboot your device !
( no need extra settings ...my Rom takes care of them to make proper settings ! )
( ..also, keep in mind what scripts you use .... the stock busybox has limited applets !!! )
regard,
Surdu Petru
Wanted to be the first to say thanks. Your work is awesome.
PaTr10T said:
Wanted to be the first to say thanks. Your work is awesome.
Click to expand...
Click to collapse
Hi !
Thank you , for your THANKS !
Good luck ! :good:
Want to be the first to say merci
Sent from my ARCHOS 80G9 using xda app-developers app
solrakk6 said:
Want to be the first to say merci
Sent from my ARCHOS 80G9 using xda app-developers app
Click to expand...
Click to collapse
Hi ...
also ...merci beaucoup !
- you can install over 4.0.24, no worries !
& for data backup I'm afraid you need to use a application from PlayStore !
Good luck ! :good:
Why my gmail account dont show my event on calendar?
So at the moment its not possible make a full backup of my rom like with cwm right?!
And what's the best governor for save battery duration??
Sent from my ARCHOS 80G9 using xda app-developers app
Hi Surdu
Installed this rooted version, ran O.K. .I've reverted to Clean-Slim-Fast as I prefer the slimmed down version.
Best regards
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
Hi, plse just confirm i have do the good step (all work fine for me, i just want confirm all)
I have downgrade to 4.0.6, after temp root and install sde, i've install again the 4.0.6. After i installed the 4.0.7 (delete the kernel) with root and 4.0.24 with root too.
And now the 4.0.25
Is that the correct step?!
Facebook Group
Archos 80 G9
JOIN US--REJOIN NOUS--JUNTA-TE A NÓS!!
https://www.facebook.com/groups/110090702484588/
---------- Post added at 09:34 AM ---------- Previous post was at 09:03 AM ----------
muti642 said:
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
Click to expand...
Click to collapse
beter for you make a clean install and reinstall all !!
In your situation i tried uninstall sde,.. format all and install the 4.0.6 official and do all step again (root, sde..)
in other words i tried a clean install!
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
HI
what's the best GOVERNOR for save battery duration??
Decided today to root and install SDE my new Archos g9 8gb and install this rooted rom, unfortunately as I had applied the standard 4.0.25 firmware there was an error when trying to install the SDE.
I tried returning to stock 4.0.7 but that now reports it is too old for my rom.
Looks like Ill be staying on the standard rom for some time yet lol
TrOjAn
****UPDATE****
Reading back I saw muti642 had the same issue, after trying the OLD outdated method I have now been able to install SDE and the latest rom.. thanks all
solrakk6 said:
HI
what's the best GOVERNOR for save battery duration??
Click to expand...
Click to collapse
Hi!
You do the right steps for install the last firmware 4.0.25 !
If you have problem with any app, please uninstall apk and try to reinstal from PlayStore!
Also you need to check what governor is the best on savebattery! , for sure is not hotplug!
Good luck!
TrOjAnUK said:
Decided today to root and install SDE my new Archos g9 8gb and install this rooted rom, unfortunately as I had applied the standard 4.0.25 firmware there was an error when trying to install the SDE.
I tried returning to stock 4.0.7 but that now reports it is too old for my rom.
Looks like Ill be staying on the standard rom for some time yet lol
TrOjAn
****UPDATE****
Reading back I saw muti642 had the same issue, after trying the OLD outdated method I have now been able to install SDE and the latest rom.. thanks all
Click to expand...
Click to collapse
Hi!
What was the problem?
probleme is
surdu_petru said:
Hi!
You do the right steps for install the last firmware 4.0.25 !
If you have problem with any app, please uninstall apk and try to reinstal from PlayStore!
Also you need to check what governor is the best on savebattery! , for sure is not hotplug!
Good luck!
Hi!
What was the problem?
Click to expand...
Click to collapse
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
thought about reinstalling via playstore..
about battery save.. i will try thx again!
muti642 said:
hello j have a problem, I have installed the update 4.0.25 after a format and puts it impossible to install the SDE or go back to a 4.0.7 error 221, I do not understand s help you please. I precise that only official firmware 4.0.25 agrees to install s.
Message i try installed SDE in 4.0.25 : this firmware uptdate is too old for your hardware version (221)
i tested your methode not work update failed (221) , my tablet is dead?
I'm going crazy I'm super archos hang on 4.0.25 and without SDE, I want to break the tablet in half so it makes me going crazy
So I managed to install j SDE via the old method, HE WAS time I lost patience.
I should be able to install the 4.0.25 root surdru but it does not always tells me why I can not go back to the old firmware.
surdru firmware Work sauved! Id like to know by what cons of this problem is
Click to expand...
Click to collapse
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
solrakk6 said:
thought about reinstalling via playstore..
about battery save.. i will try thx again!
Click to expand...
Click to collapse
I had similar problems with some applications google owner, and I resolved by reinstalling ! :good:
( also for full compatibility please , first use English to see if is there some issue ! )
The best Governor for our tablet seems to be hotplug, is the only one who knows how to manage both processor cores !
...also you can take a look here ( Android CPU governors explained ! )
surdu_petru said:
Hi!
Hi!
What was the problem?
Click to expand...
Click to collapse
The problem was error 221 or 223 depending on where I was and what I was doing.. basically::
On a NON rooted Archos 8gb 101 I updated to the official 4.0.25 (which worked) and then I wanted to install SDE / Root.
I was unable to do either using the newest ( link here ) method but the OLD method ( link here ) worked, that then allowed me to install SDE and then a custom rom.
On a side note: Can anything be done to improve the audio volume? When I watch a movie I have to use earphones as the speaker volume is too low?
TrOjAn
surdu_petru said:
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
the problem was only after doing the update from 4.0.24 to 4.0.25 installing the SDE was no longer possible error code 221.
to solve it took Roote and install the sde of the old method (with adb), I have the install your room.
Click to expand...
Click to collapse
muti642 said:
surdu_petru said:
So, now you have managed to install SDE, or not ?
( For Official Firmware you are not allowed to downgrade firmware ! On root version you can install any firmware you want ! )
the problem was only after doing the update from 4.0.24 to 4.0.25 installing the SDE was no longer possible error code 221.
to solve it took Roote and install the sde of the old method (with adb), I have the install your room.
Click to expand...
Click to collapse
Ok !
I understand :good:
...but, I do not understand, why you need to reinstall SDE - as long as SDE does not uninstall single, after you perform a new update ....
Click to expand...
Click to collapse
just litle question.
Imagine now i run 4.0.25 root from surdu ... tomorrow i want restore all to the latest official firmware ..
Just need delete sde menu
format all and put the file to update?! and voila.. It's easy like that?!
I dont want comeback.. i like too much this version and rooted better still !!
just for knowledge
Congatulations for your work surdu without you was impossible have a clean stock rooted rom.