Codename Android { CNA } { ROM } 5/13/2012 - Atrix 4G Android Development

HELLO,
this is a port of the codename android rom found here
put into jokersax cm9 found here
brought to you by:
TEAM MOTO TEGRA
INSTRUCTIONS:
fresh install:
format system, data, cache
flash rom, flash rom, flash gapps
fix permissions and reboot phone
trouble installing using that method? try using this one found here
* no kernels have been tested flashing one is at your own risk
* if you run into a few fc's go into recovery wipe dalvick cache and fix permissions then reboot phone
current build: based on jokers cm9 6.1 and CNA rc2 release via twitter 5/12/2012
CODENAME ANDROID LINK
released on 5/13/2012
if can't use jokers site go here
goo-inside.me devs/spleef/atrix
*Please report any and everything i do not own an atrix so i am counting on the atrix community to test these build and let me know what needs fixing...thanks
MAJOR THANKS TO QBKING77 FOR HIS INSTALL AND REVIEW VIDEOS!!!!
{ note these videos are of the photon }
qbking77 youtube channel: http://www.youtube.com/user/qbking77/featured
*How to install:
http://www.youtube.com/watch?v=ZZvVQ7GpDFg
*Review:
http://www.youtube.com/watch?v=Db_7oyfX2w0

reserved

reserved ...

camera
does the video camera work??? and i am using cm7 neutrino can i flash this over it

abdussamad said:
does the video camera work??? and i am using cm7 neutrino can i flash this over it
Click to expand...
Click to collapse
No, as has been loud and clear for a very long time, and we wont do until proper ics libs have been released

abdussamad said:
does the video camera work??? and i am using cm7 neutrino can i flash this over it
Click to expand...
Click to collapse
no video does not work it is an ics rom and all ics roms have bugyy/no video without the use of a market app
to flash this you will have to fully wipe coming from any rom except for cna

Installed but forgot to fix permissions and couldn't get passed boot animation.
Trying again
---------- Post added at 06:57 PM ---------- Previous post was at 06:55 PM ----------
Nope.
Still stuck at boot animation.
Gonna try new AOKPCB and report.

ATRIXXIRTA said:
Installed but forgot to fix permissions and couldn't get passed boot animation.
Trying again
---------- Post added at 06:57 PM ---------- Previous post was at 06:55 PM ----------
Nope.
Still stuck at boot animation.
Gonna try new AOKPCB and report.
Click to expand...
Click to collapse
k going to try to swap in a few things see if that works will edit when reuped

Sounds good.
New AOKPCB is working awesome!! So far at least.
Sooo happy to have wifi back!! lol. Latest MiUi didn't have wifi for me.
Nice to see the themes there too.
How exactly do I go about themeing this badboy?

ATRIXXIRTA said:
Sounds good.
New AOKPCB is working awesome!! So far at least.
Sooo happy to have wifi back!! lol. Latest MiUi didn't have wifi for me.
Nice to see the themes there too.
How exactly do I go about themeing this badboy?
Click to expand...
Click to collapse
that im afraid to tell you is going to be a trial and error bit make a backup first off
then can search in google for aokp/cm9 themes or even ehre on xda and whichever ones come up make sure it fits your phone hdpi/mdpi and so on
also new cna is up again i think i used the wrong runtime it was the aokp runtime not the cna should at least boot now

You developers really need to take a break or vacation. Can't keep up with these ROMs.
Sent from my MB860 using XDA

What boot animation is supposed to be with CNA?
When I tried it before I had the AOKP Team Kang unicorn boot animation.
Was that something to do with that or is that the normal boot animation for CNA now?

Deggy said:
You developers really need to take a break or vacation. Can't keep up with these ROMs.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
lol...yeah i hear ya once i get them going right wont be as many updates maybe one a week...but as long as i get reports of it dont boot or cam not working or bt sends to reboot or any type of issue ill keep tweaking and changing things around until we find the sweet spot like ive got for aokp/aokpcb last twp releases on them (as far as i know) have been running great
gummy as far as i know working good
cna only problem child as of now but hopefully the reup i just did resolves that

ATRIXXIRTA said:
What boot animation is supposed to be with CNA?
When I tried it before I had the AOKP Team Kang unicorn boot animation.
Was that something to do with that or is that the normal boot animation for CNA now?
Click to expand...
Click to collapse
nope not normal cna animation is the stock nexus animation with all the colors square flowing in and out
aokp is the pink unicorn
aokpcb is the old nintendo looking start screen
gummy the fying poptart
went ahead and readded the media files/folder just to be sure its got the right animation am reupping it but its in que behind another aokpcb release...lol they reuped after i downed
their release so like i always do they update i update will ring the dinner bell when its ready
k new cna is up again

Got to the boot animation but no further. Format, flash, flash, gapps and fix permissions. Then tried data we but no go.
Sent from my MB860 using xda premium

What boot animation did you get? just curious

Nexus. I came from AOKPCB with video game animation.
Sent from my MB860 using xda premium

Tablet Mod for CNA is UP on
www.Jokersax.com
Under Mods section by Th3Bill
Personally tested it

Yup me too. No boot with the team kang animation.

new cna posted this morning same name same link let me know how it goes

Related

[ROM]MIUI 1.7.8 [2.3.4]: Orange Infusion no. 2 [7/8/11]

Notice: Remember to always back up your important files.
This ROM (1.7.8) is based on the miuiandroid.com release and translation..
------------------------------------------
How to Install
Code:
0 - Start from a rooted Eclair/Froyo rom
1 - Download these files:
a) Latest MIUI release (see bottom of post)
2 - Copy the latest MIUI to the SD card.
3 - Enter clockwork recovery
4 - Flash the latest MIUI version
To uninstall MIUI, you should Odin back to stock.
------------------------------------------
What's working?
Data, Wi-Fi, Internal SD, External SD, Themes, Ringtones, Media Scanner
What's not?
GPS, stock keyboard haptic feedback, bugs with this build of MIUI, & the bugs listed in the CM7 thread.
------------------------------------------
Screenshots:
------------------------------------------
Changelog:
Code:
MIUI 1.7.8
Updated base
Lockscreen fix
Vexillum set to default
MIUI 1.7.1
Updated package base to new MIUI release
Project Vexillum set to default
miui.us lockscreen fix
NEO10 kernel
Added in Google Apps
Added in Chainfire3D
Added in DSPManager
Added in Stock Gallery
Added in Genie Widget
Galnet's media and touchkey mods
Replaced MIUI superuser app
------------------------------------------
Thanks:
MIUI Dev Team
Team Douche
Team Hacksung
markhuk
miuiandroid
miui.us
Kenia1234
g4rb4g3
zacharias.maladroit
galnet
------------------------------------------
Download:
MIUI 1.7.8 (latest):
http://www.multiupload.com/V2OHLGMMU7
MIUI 1.7.1 (old):
http://www.multiupload.com/7FDOGKOHXU
MD5: fc6a93f3e765e2775c529f52fdc9ebd1
Reserved Space #1
and here ppl were saying you quit updating MIUI roms. good stuff!
I'm jumping back onto miui as soon as the mute/unmute or robot voice issue is resolved. I would break up with my girlfriend for working gps on miui.
Shaul305 said:
and here ppl were saying you quit updating MIUI roms. good stuff!
Click to expand...
Click to collapse
Thanks. Google+ FC issue you were having on other roms should be fixed.
Thanks Segnaro!
Segnaro said:
Thanks. Google+ FC issue you were having on other roms should be fixed.
Click to expand...
Click to collapse
problem fixed. Don't know what you did. But just like the 1.6.17 ROM i was stuck on of yours, because of the Google+ issue, it works like a charm.
Either way, glad all of the folks still working on ROMs for the Vibrant are continually doing what they do. I appreciate all of the devs' work.
Thanks.
I've been trying the 3 button method to get into download mode but it keeps booting into MIUI, never had a problem before getting into download using this method. Is there any other way to odin?
Whats the difference between this and the miui.us release? Is this more official than miui.us because its by miuiandroid?
Sent from my SGH-T959 using XDA Premium App
haptic feedback not working on android keyboard. Anyone else have this problem?
VibrantWind said:
haptic feedback not working on android keyboard. Anyone else have this problem?
Click to expand...
Click to collapse
I think that is a known bug on miui.us
I just switched to the official one because I thought u said u stopped. Definitely switching back now
hitman818 said:
Whats the difference between this and the miui.us release? Is this more official than miui.us because its by miuiandroid?
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
It's not more official, translations are just done by another team.
This, however, is my custom MIUI rom with the miuiandroid base.
Sent from my SGH-T959 using XDA App
Segnaro said:
It's not more official, translations are just done by another team.
This, however, is my custom MIUI rom with the miuiandroid base.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
this looks good
Great rom build as always man, but just wondering what galnets media and touch key mod does?
Wooohooo you're back Segnao!
Downloading now, flashing later today.
oh thank god, Glad to see your back uploading these Segnaro.
Can someone PLZ check if textfree works on this then get back to me asap. Plz
Sent from my T959 using XDA Premium App
Edit: YAY! it does work for this unlike the Miui.us version, thanks Segnaro!
Kennii said:
Can someone PLZ check if textfree works on this then get back to me asap. Plz
Sent from my T959 using XDA Premium App
Edit: YAY! it does work for this unlike the Miui.us version, thanks Segnaro!
Click to expand...
Click to collapse
Yes, apps that force closed from location issues should be fixed. Google+, textfree, browser, etc.
Ok, just flashed this ROM and I am not sure if something is wrong. I went in clockwork, turned voodoo off, rebooted and flashed, but it didnt finish and went straight to the MIUI boot logo, now keeps going back into clockwork flashing and the process repeats. Is this how it is supposed to go?
nickdog670 said:
Ok, just flashed this ROM and I am not sure if something is wrong. I went in clockwork, turned voodoo off, rebooted and flashed, but it didnt finish and went straight to the MIUI boot logo, now keeps going back into clockwork flashing and the process repeats. Is this how it is supposed to go?
Click to expand...
Click to collapse
Boot into recovery mode manually and try flashing again.

Bionic Cyanogen Mod 9 CM9 for the ICS LEAK

Im sure some of you know about this already but for those who dont here it is.
DroidHive.com for support!
You must be on the ICS-Leak
.2231 and up
You can find the ROM here
http://www.droidhive.com/forums/index.php?/files/file/69-ics-leak-cm9-unofficial-nighghtlies/
Safestrap 2.0 is the is the supported install method at this time.
You can get it here
http://rombot.droidhive.com/ROMs/targa/BionicSafestrap-ICS-2.00.apk
If you need help DroidModd3rX has a tutorial on youtube here
http://www.youtube.com/watch?v=t8YSC1J2bH0&feature=g-all-u
These are nightlies so the link will take you to the download folder and the changelog link is listed. This will save us having to edit this post every day.
Quote
AOSP and CyanogenMod for all the hard work on the source
Hashcode for merging the motorola code into framework base and system core and setting up the initial device and vendor trees for sypder, as well as sharing his progress on the DROID 3 with us and letting me hit his GTalk all the time. Without his work NONE of this would have been possible
Google for giving us Android to play with
ALL DEV’s in forums everywhere for giving me the inspiration that I can do this too!!!
All source is available at:
http://github.com/dhacker29
http://github.com/hashcode
http://github.com/STS-Dev-Team
Data on boot has been improved and should work all the time in LTE areas if not follow note below.
NOTE: For now you MUST dial *#*#4636#*#* or use Phone Info from the market and go into phone settings and toggle to GSM only mode then wait for data to come up. Do not toggle to any other mode JUST WAIT.
Google apps are not inclued be sure to download and flash them with the ROM.
What works:
Pretty much everything. Full media codec support for Netflix and YouTube HD, Camera and video camera (front and back), HW acceleration for Google Chrome.
All media codecs are build from source now with omap enhancement from ti omapzoom.org.
Very stoked to see this. I'm going to wait a bit to see if any other ICS Leak-based ROMs release and get an idea how stable they are. I'd be very happy to see MIUI.
Are these unofficial roms as save/reliable as the official CM9 roms?
Sent from my DROID BIONIC using xda app-developers app
asmith1243 said:
Are these unofficial roms as save/reliable as the official CM9 roms?
Click to expand...
Click to collapse
The answer will always be no. If a device isn't officially supported, then the ROM won't have the same visibility and expertise that the CM process provides.
They are dhackers roms. Ive been using cm9 for ics leak since 233 came out. I haven't had any issues. He also has aokp for pics leak and aceoyame has miui for the leaks there also.
Sent from my XT875 using Tapatalk 2
CM9 links don't work
Those CM9 links that you provided on top do not work.
eazyigz said:
Those CM9 links that you provided on top do not work.
Click to expand...
Click to collapse
DroidHIVE got hacked. Not all the files have been re-uploaded since it was recovered
Go here and you can get the ics-leaks..
http://www.droidhive.com/forums/index.php?/topic/1601-romstore/
could someone point me in the right direction for a link that works. theres lots of different cm9 builds out there but if everything on this works i would like to find it.
carter_e said:
could someone point me in the right direction for a link that works. theres lots of different cm9 builds out there but if everything on this works i would like to find it.
Click to expand...
Click to collapse
http://nightlies.droidhive.com/mirror/targa/ics-leak-builds/cm9/
everyone has the screen rotation problem with this rom right? with the screen getting really small? i know some ics leaks were having rotation problems but my 232 leak rotates perfectly
So what does not work with this rom?
OP says pretty much everything works.
---------- Post added at 11:00 AM ---------- Previous post was at 10:59 AM ----------
linuxgator said:
http://nightlies.droidhive.com/mirror/targa/ics-leak-builds/cm9/
Click to expand...
Click to collapse
Not a single link for this rom anywhere. All the droidhive links are dead. Anyone have a link?
^+1
draexo said:
So what does not work with this rom?
OP says pretty much everything works.
---------- Post added at 11:00 AM ---------- Previous post was at 10:59 AM ----------
Not a single link for this rom anywhere. All the droidhive links are dead. Anyone have a link?
Click to expand...
Click to collapse
There's a link to it on this thread along with pretty much everything else you could want. That specific ROM is located in the second post of the thread.
http://www.droidrzr.com/index.php/t...tstrapall-download-links-in-op-updated-daily/

DARKNESS[cm10.2]''''''''blackedout/greyedout'''''''{4.3} rom

................................................................DARKNESS ROMS....................................................................................
This rom is compiled from source and most of the color has been greyed out. I made this rom because i was tired of the blues and other colors so made this for my personal use. Decided to share the rom for others who might find it usefull. I will most likely update once a week.
build from cm10.2 source
working pie controls
mms moded for unlimited size messages to be sent
some init.d tweaks
SystemUI tweaks
mms.apk and contacts.apk partly themed ( work in progress more to come)
added adaway for those who want it (must be activated by app in app drawer)
some graphic glitchs in browser and when scrolling
IF ROOT IS LOSS ENABLE IN DEVELOPER SETTINGS ROOT ACCESS SELECT APPS & ADB THEN REBOOT
added raw-kernel-r2 (thanks for new kernel @GeeckoDev stop by his thread and say thanks kernel thread
ROM DOWNLOAD (4.3):DARKNESSROM(9/17)
DARKNESS-(9/22)
GAPPS 4.3: http://goo.im/gapps/gapps-jb-20130813-signed.zip
MIRROR (4.3):http://www.mediafire.com/download/f1655qox33y3j5v/gapps-jb-20130813-signed.zip
flashing rom
download rom and gapps
full wipe
flash rom then gapps
reboot
rom can be flashed over 10.1 with no wipes but any problems try full wipe and retest
changelog for cm10.2:http://changelog.bbqdroid.org/#/n7000/next
Nice Icons.. great
Sent from my GT-N7000 using Tapatalk 2
welcome dude
whats the kernel?
Kernel is stock with ROM
sent from the DARKNESS
Well done. Very good see a another CM10.1 roms. Congrats . Will test it out :good:
But you should consider some other source for downloads. Why don't you register in goo.im
Galaxtus said:
Well done. Very good see a another CM10.1 roms. Congrats . Will test it out :good:
But you should consider some other source for downloads. Why don't you register in goo.im
Click to expand...
Click to collapse
yep i second that.
maybe even dev host..
regards
Ask bangsti for mirrors
Downloading now
Sent from my GT-N7000 using xda premium
I will be looking in to new host sites just had that one
sent from the DARKNESS
added mediafire host much faster download
Nice rom so far. Love those greys. But found small bug. Take a look at the Google now app. Its has major graphical glitches more update will come soon.
#Galaxtus#
I well look into that
sent from the DARKNESS
OP updated with lasted cm merges and gapps updated with google search fix
There is a major problem. The current version. It seems this ROM is not establishing any network. I thought it was at my end. Tried to install this from past 3 days but exact same problem. There is always unknown baseband in About phone menu. See screenshot. Please see through.
#Galaxtus#
redownload rom and try. i just uploaded fixed rom and flashed on two phones and is working i belive there was a problem with phone.apk that was giving this problem. let me know if it is fixed or not
do you really name it DARNESS_[4.2.2]_CM10.1_V1.0?? missing k here (in build number)... without this k everything will be a mess..... k is very important you know...
ps: nevermind me...just boring waiting for it to download. thanks for the rom.
Didn't even notice that the whole ROM may fall apart hahaha will pay more attention in following builds
Sent from my GT-N7000 using XDA Premium HD app
I am Mithun46 - not mithun64 lol
mithun46 said:
I am Mithun46 - not mithun64 lol
Click to expand...
Click to collapse
Ops fixed
sent from the darkness
Thanks for the ROM
mithun46 said:
mithun46 - not Mithun46
Click to expand...
Click to collapse
Dude really ...be grateful that the dev has mentioned your name in the first place ...are your posts helping in development? No ...so please don't post stuff like case sensitive mistakes....
Sent from my GT-N7000 using xda premium

[Rom][4.0.4] Evervolv 2.2.0 [22.OCT.2013][Build 2]

Evervolv 2.2.0 ICS
by faZevoLv​
Github
This rom is source built by me and based off the Evervolv 2.2.0 ICS sources (android 4.0.4). Evervolv is a custom built rom based off cyanogenmod and has man y fixes and performance enhancements for older devices, such as the HTC buzz. For the htc buzz specific files, i used ErwinP's source which is the most up to date for our device.
Evervolv Github
HTC Buzz device source
To get started yourself just sync up the sources:
Code:
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
chmod a+x ~/bin/repo
export PATH=~/bin:$PATH
repo init -u git://github.com/Evervolv/android.git -b ics
repo sync
cd device/htc/buzz
git clone https://github.com/ErwinP/android_device_htc_buzz.git
make -j# otapackage
(where '#' is the number of jobs. e.g. -j8 for more speed!)
This will then give you an evervolv rom in 'out/target/product/buzz' as a zip file which can be flashed to your phone.
Key features
Evervolv 2.2.0
Evervolv toolbox
Custom evervolv launcher
Extra evervolv settings
low battery drain
more features soon...
Credits
Code:
Evervolv Team
ErwinP
Google
Cyanogenmod Team
HTC
All HTC buzz developers
Downloads
Build 2
Build 1
Changelog
# Build 2 - 22/10/2013
- Fixed task previews
- Fixed screenshot
- New EGL drivers (huge speedup!)
- Fixed surfaceflinger
- Added Apollo music player
- Removed useless RAM hungry apps
# Build 1 - 19/10/2013
- First Evervolv source build.
Bugs
Code:
- Theme chooser force closes
- All CM9 bugs
Thank you, first to try aswell
Thanks man, also was you trying to fix the camera on this?
If so i'll help out, since I have free time
Stone. Cold said:
Thank you, first to try aswell
Thanks man, also was you trying to fix the camera on this?
If so i'll help out, since I have free time
Click to expand...
Click to collapse
No the camera problem is on the evervolv GB rom.:/
Don't know if aosp ics work as stable as aosp gb, but will hiver à try.
Sent from my HTC Wildfire using xda premium
Oh i didn't know
---------- Post added at 02:33 PM ---------- Previous post was at 02:06 PM ----------
Okay time to give my feedbacks
So at first when the ROM booted, the system was very laggy and after when i went to app drawer the Device went completely blank and the phone switched off, although the screen was still on.
Rebooted system, all works fine
It's an ok ROM but very laggy at start
But then again thanks for bringing evervolv to our device, i'll be trying out the GB version now
Stone. Cold said:
Oh i didn't know
---------- Post added at 02:33 PM ---------- Previous post was at 02:06 PM ----------
Okay time to give my feedbacks
So at first when the ROM booted, the system was very laggy and after when i went to app drawer the Device went completely blank and the phone switched off, although the screen was still on.
Rebooted system, all works fine
It's an ok ROM but very laggy at start
But then again thanks for bringing evervolv to our device, i'll be trying out the GB version now
Click to expand...
Click to collapse
yeah ill fix the laginess in the next build, ErwinP showed me the file I need to edit
faZevoLv said:
yeah ill fix the laginess in the next build, ErwinP showed me the file I need to edit
Click to expand...
Click to collapse
Awesome! :good:
Good work!
I am going to try it out!
Yup not sure what I'm doing..but I don't know house to sync sources I know nothing about coding. This sucks I really wanna try both of these roms.
sent from my bad ass WICKED SENSATIONS eREDicated
thenugdestrroyer said:
Yup not sure what I'm doing..but I don't know house to sync sources I know nothing about coding. This sucks I really wanna try both of these roms.
sent from my bad ass WICKED SENSATIONS eREDicated
Click to expand...
Click to collapse
That's just a guide to build it yourself, download the rom! in the second post and flash in recovery
Report bug:
Honeycomb lokkscreen show norhing, the theme chooser fc's, miss an camera app
Sent from my HTC Wildfire using xda premium
Pator57 said:
Report bug:
Honeycomb lokkscreen show norhing, the theme chooser fc's, miss an camera app
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
building a new one now
faZevoLv said:
building a new one now
Click to expand...
Click to collapse
Awesome!
build 2 coming soon! been building all day and fixing build errors, testing it myself soon...
faZevoLv said:
build 2 coming soon! been building all day and fixing build errors, testing it myself soon...
Click to expand...
Click to collapse
Awesome! :good:
Fixed task manager previews!!!
But it reboots when locking the screen...
will fix tonight...
Will build 2 be a one folder flashable zip this time? I hope it works for me I really feel like I'm missing out.
Sent from my HTC Wildfire using xda premium
thenugdestrroyer said:
Will build 2 be a one folder flashable zip this time? I hope it works for me I really feel like I'm missing out.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
Ill use a different updater script so you can flash it
Thanks man hope it's no problem for you, when you thinking it will be available for download?
sent from my bad ass WICKED SENSATIONS eREDicated

[WIP][ROM-PORT] Paranoid to sm-t210r (DEAD PROJECT)

warning installing this on your device is at your own risk!!!!, this is an early stage port by a noob(aka FIRST EVER PORT.....) i take no credit for the work thats been done by our cm 11 team or the port to make this port possible. im simply just learning to port for our device and adding some flavour and spice to our device!!
what is it?
paranoid kitkat 4.4.4 (as far as i know its working for SM-T210/R)
what roms did i use for this port? (May change during source build)
CM11= http://http://forum.xda-developers.com/showthread.php?t=2783617
PORTED ROM= http://http://forum.xda-developers.com/galaxy-tab-3/development/rom-pac-rom-t310-t2855823
what future development will be done with this rom?
(WIP) -kernel overhaul from my own kernel build ( just borrowing gr8nole's work till i figure out some issues in my own kernel)
(WIP) -source re-build (fixing some rom issues im having)
(WIP) -new theme/layout of PA
(WIP) -adding more features to the build
the big question, whats broke?/working?
you tell me..... most things should be working that is working in our cm build beta 3 ( i hope) and a few more things broken from the port rom check out both rom pages (^^^^^^^posted above^^^^^^) for more info on whats working/whats broke before posting here please! DO NOT INSTALL THINKING ITS A DAILY USE ROM!!!!​
i am taking (dev) advice where ever i can get it to improve the rom/port and re-build from scratch
like i said this is my first port so be nice.... I'm learning from piles of half built/outdated tutorials on my free time.
thanks out to all who got our device this far and lets hope it grows from here!! All thanks goes to the Rom base and port devs above and everyone in between because I'm just a casual trying to learn.
(WIP) - THIS IS A TEST PORT ONLY!!! NOT BY ANY MEANS A FINAL OR EVEN A BETA PRODUCT !!!!!!!​
Download link
http://d-h.st/R25​
XDA:DevDB Information
paranoid android sm-t210r , ROM for the Samsung Galaxy Tab 3 7.0
Contributors
wait4me2burn
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2014-09-06
Last Updated 2017-12-09
reserved 1
one more to be safe.....
Downloading
Sent from my SM-T210R using XDA Free mobile app
Link not working
svicenty said:
Link not working
Click to expand...
Click to collapse
Clicked the "DOWNLOAD", keep trying and close the ads, always happens to me
---------- Post added at 08:17 AM ---------- Previous post was at 08:14 AM ----------
Post Kernel sources
HerroYou said:
Clicked the "DOWNLOAD", keep trying and close the ads, always happens to me
---------- Post added at 08:17 AM ---------- Previous post was at 08:14 AM ----------
Post Kernel sources
Click to expand...
Click to collapse
I also uploaded it directly to xda if you click download on the tabs above the Rom along with the direct link.
And as of right now its nothing more then the port itself just the files of the two roms cut and paste working .....like I said its a port in progress.
It's still mostly pa framework riding on our cm devs kernel..... the kernel source is still the kernel of cm 11. I'm having issues compiling a working kernel (my first kernel project) once I have a stable working kernel ill upload if I figure it out.....
svicenty said:
Link not working
Click to expand...
Click to collapse
they both seem to be working to me..... if the link isn't working click the download tab above the op I know its working both are just downloaded from both.....
could not flash
had problems flashing. recovery said error with the update script binary so it couldn't flash the rom. should I change recovery to see if that helps I have twrp recovery..
edit: got it working with phils touch recovery but as soon as it starts up ui crashes and it doesn't seem to want to wake up or screen shuts off
​
wait4me2burn said:
reserved 1
Click to expand...
Click to collapse
I the rom description, it says t210r only. It will also run on t210.
DevMyAndroid said:
​
I the rom description, it says t210r only. It will also run on t210.
Click to expand...
Click to collapse
Yes it will
315phatboi said:
had problems flashing. recovery said error with the update script binary so it couldn't flash the rom. should I change recovery to see if that helps I have twrp recovery..
edit: got it working with phils touch recovery but as soon as it starts up ui crashes and it doesn't seem to want to wake up or screen shuts off
Click to expand...
Click to collapse
Needs the latest recovery in order to boot. A clean wipe probably wouldn't hurt. Most of the vendor drivers are not working like in the cm build, so its slow working and laggy..... I'm away for the weekend so if I do any work it will be from my tablet. Going to try to start the kernel build this week when I get home.hopefully have my own device tree/kernel up this week....build permitting...
DevMyAndroid said:
​
In the rom description, it says t210r only. It will also run on t210.
Click to expand...
Click to collapse
good news will change the op. ill try my best to keep both as this build forks from the cm source. Tho most of the work will be aimed at the 210R as its the device I own.
Many Thanks!
Hey I just tried this port on my galaxy tab 3. The only bugs I had with it is:
1. No Setup Wizard
2. Very slow and laggy
3.Wifi does not work no matter what
Anyways many thanks for this rom and I believe that once laufersteffenwolf recovers he will try to fix the bugs on these type of roms!
Anyways again many thanks I can't tell you how proud i am for you Rom Developers
testers
Cant do much either im a noob but if u would like testers im here
just saying
Hey buddy, thanks for trying this
Very excited for PA in this tab.
If you need any help, just ask
Tried it kinda slow but its a begin
Verstuurd vanaf mijn SM-G900F met Tapatalk
I'll try working on this a bit...
Sent from my Venue 8 Pro 5830 using Tapatalk
Lincoln99 said:
I'll try working on this a bit...
Click to expand...
Click to collapse
feel free to add/fix whatever you see fit and ill add it to the rom!
(any help is help)
i posted this port and havent had time lately to get to core broken features/ problems with it besides a few tweaks due to worklife, but have been picking at it when i have had time.
planing a theme update with some of the system tweaks/issue fixes sometime this month with the kernel i just built. hoping to have a link up for it this week after some more testing cycle is done to it.
Hello. I tried your rom.
Well, WiFi and BT aren't working. It's laggy and the Documents always crashes.
wait4me2burn said:
feel free to add/fix whatever you see fit and ill add it to the rom!
(any help is help)
i posted this port and havent had time lately to get to core broken features/ problems with it besides a few tweaks due to worklife, but have been picking at it when i have had time.
planing a theme update with some of the system tweaks/issue fixes sometime this month with the kernel i just built. hoping to have a link up for it this week after some more testing cycle is done to it.
Click to expand...
Click to collapse
Unfortunately I haven't had time to work on this, however, I may have some time this week. And @gr8nole got hwcomposer working in CM11, so I may try fixing that.
Sent from my SPH-D710 using XDA Premium 4 mobile app

Categories

Resources