i have installed custom rom andro-id rc3
which mobile do i need to choose in CMW v 5 ??
My device is spice mi410
please help!
please help guys!!!
Please clarify more
when in cmw
1. press backup currrent rom
2. it says you must have clockworkmod recovery installed before continuing
3. press install
4. it says confirm phone model --- options are like commtiva z71, dell streak, huawei ascend, etc.
5. ders no option for spice mi410 or its variants
6. which phone should i choose?
This is probably the ROM Manager app that you have installed from Android market... This is not the CWM recovery... it's just an app from the same dev... Read to use CWM recovery in the dev section...the Andro-id-RC-3 is already rooted and has CWM recovery installed.. To access CWM turn you phone off and then while holding down the volume up and fire buttons together, press the power button...
Sent from my FIH-FB0 using XDA
yeah man u wer absolutely right!
Related
Hi I'm trying to install miui for my sister in law on her Galaxy S but I can't seem to install CWM.
I've downloaded rom manager from the market clicked on flash recovery (fist option) then from the list chose samsung galaxy s. The next I clicked on reboot to recovery but when it boots into it, it says at the top Android system recovery (3e)
What am I doing wrong???? :s
PS I don't have a memory card inside my phone trying to install via the internal sd storage. The also I don't have access to my pc so need to do it off my phone. Please any help appreciated thank you.
Sent from my GT-I9100
When you boot into recovery press the buttons a couple of times. Ie, 3button combo to boot, release all the buttons and press the 3buttons again. I have had the same problems on 3sgs's and this seemed to work on them.
No luck
Any one else have any ideas. Please any help is appreciated.
Sent from my GT-I9100
Buy a jig usb..It put your bricked phone on download mode in only 2 seconds!
Nezys said:
Buy a jig usb..It put your bricked phone on download mode in only 2 seconds!
Click to expand...
Click to collapse
I don't think he's mentioned not getting into download mode.... Confused by your reply.
Sent from my GT-I9000 using xda premium
I have clockworkmod recovery installed and when i click on reboot to recovery or use the 3 button configuration it only boots into the android system recovery.
I can not for the life of me get the Cwm recovery to boot up.
Is there a kernel I can flash with rom manager to get cwm installed
Sent from my GT-I9100
It's definitely rooted? What rom is it currently on?
Sent from my GT-I9000 using xda premium
Darkys rom. Plus i have titanium backup installed and backed up my apps. Superuser is working perfectly.
I want to install miui the official rom.
Anyway I can without having to use a pc??
Sent from my GT-I9100
If it's on Darky's rom, it should have cwm already! Not sure if you can do it from your phone now mate.
Once you've got the cwm sorted (hopefully it's a gingerbread rom) you need to format system, data and cache, then flash Miui.
Sent from my GT-I9000 using xda premium
Ahhh.
Flash darky RE via Odin. But if you are running darky kernel you should have cwm. Uninstall cwm app and try again.
ichigo786 said:
Hi I'm trying to install miui for my sister in law on her Galaxy S but I can't seem to install CWM.
I've downloaded rom manager from the market clicked on flash recovery (fist option) then from the list chose samsung galaxy s. The next I clicked on reboot to recovery but when it boots into it, it says at the top Android system recovery (3e)
What am I doing wrong???? :s
PS I don't have a memory card inside my phone trying to install via the internal sd storage. The also I don't have access to my pc so need to do it off my phone. Please any help appreciated thank you.
Sent from my GT-I9100
Click to expand...
Click to collapse
If i understand well, you can't use odin because you don't have PC,right? Well:make sure that your phone is rooted. Go to market and get that application : "sgs kernel flashar " the one by neldar.
Then download a kernel for your firmware, and make sure you download a tar file or obtain a zimage file. Flash it with the application mentioned, you don't need any cwm. After that you flash the new kernel you should have a cwm installed.
If i understand wrong I'm sorry.
Inviato dal mio GT-I9000 usando Tapatalk
I'm a x10 user who changed the kernel, baseband and of course ROM of my little 4 inch x10... all with xrecovery and flashtools.
I'm now with the wonderful Galaxy NOTE and I read that here I should use CMW, stock recovery and other like ROM manager.
but I haven't seen anything that matches with my kernel KJ8... so
can I change my kernel to KKA OR KK8 OR SOMETHING ELSE???
IF THAT'S THE CASE... HOW DO I DO THAT?
THANKS 4 READING AND LOT OF THANKS 4 ANSWERING ME...
yes you can use a kka or kk9 kernel without a problem.
First you need to root and accordingly flash a kernel.
In developer section you can find how to do so.
Sent from my GT-N7000 using xda premium
THANKS
I'VE ROOTED MY NOTE. EVEN I'VE INSTALLED THE CWM RECOVERY.... I FOUND THIS TRHEAD
http://forum.xda-developers.com/showthread.php?t=1371007
BUT THERE'S NO "HOW TO"
CAN U TELL ME PLZ??
THANKS 4 ANSWERING ME X:3
Enough with the capslock.
1. Boot into recovery.
2. From recovery mode, select wipe cache partition
3. Installed zip from SD card
4. Navigate to the kernel and select it to flash it
5. Reboot
Never under any circumstance flash the KK8 Kernel just yet since there's no way to ROOT it.
@georgegon60 You mentioned that you where on KJ8 and that's why you could ROOT it.
Cheers!
Rayan
georgegon60 said:
THANKS
I'VE ROOTED MY NOTE. EVEN I'VE INSTALLED THE CWM RECOVERY.... I FOUND THIS TRHEAD
http://forum.xda-developers.com/showthread.php?t=1371007
BUT THERE'S NO "HOW TO"
CAN U TELL ME PLZ??
THANKS 4 ANSWERING ME X:3
Click to expand...
Click to collapse
1(a).check if u already have an app called "cwm" installed on your phone. If yes, click on app and reeboot to recovery.
1(b).If there is no cwm app,switch off your phone.wait for 10sec.press volume up+power+menu buttons and hold them untill the phone boots into recovery.
2.using volume buttons scroll down to install zip from sdcard
3.click menu button
4.navigate to path where you have placed the kernel zip file.
5.click menu button
..let the phone do its work..
..after it had finished, go back and reboot..
its done.. enjoy..
i rooted my x8 using the toolbox, than i installed dual mode recovery, so i guess it all went well it says copying some files somewhere, and installing CWM recovery and installing x recovery... press any key to continue... but there isn't cwm manager installed, i tried to reboot into recovery via titanium backup, but nothing...
Press the back button while booting ?
Sent using a E15i and xda premium app
When you are in stock rom there isn't reboot to cwm
You have to press the back button while you are in sony ericsson logo
If this don't help reinstall cwm with the same way.
Sent from my X8 using xda premium
if you want reboot option u had to custom rom.another way to go xrecovey when se logo apperes rappidly press the back button.then u will entrer the xrecovery menu.to check u installed xrecovery u must have super user icon in your menu
hit thanx if help
Hello, I'm a n00b here, please I need help before my droid bricks!!!
I was attempting to install the CyanogenMod7 following the Wiki directions, but when I finally clicked the "start" button on the Odin Multidownloader 4.38 only appears a strange message that I cannot decipher: "Check image files!!"..(????) I don't understand, my phone is a rooted one, I followed every direction strictly, dudes, please I need help, I don't want my device to get bricked...
u flash cm7 usung odin?cm7 is not support firmware?u must flash it using clock work mod recovery.
Sent from my GT-S5570 using XDA
U cant flash cm7 with odin
Install CWM first via odin then u can flash cm7.
Sent from my GT-S5570 using Tapatalk 2
You should flash GingerBread Stock Rom via Odin, if you dont have it already. You should connect phone with USB cable and put it to download mode (press Home button, Volume down and Power button all at the same time) Than flash ClockWorkMod via Odin again... than put the zip file of the Cyanogen ROM on the root of you SD Card... than reboot the phone in recovery mod (press Home + power button until the menu shows) than go to install zip via Sd card >>> choose zip from Sd card .... and choose the CM zip on the root of your SD card..... after it fully loads wipe data and cache and reboot...
ENJOY YOUR CYANOGEN ROM....
Sent from my GT-S5570 using xda premium
Hello. i have tried to get my mobile modded this hole day and now i only need CWM or TWRP...
My mobile is:
JB
Android-version 4.1.2
Kernel-version 3.4.0-DooMKernal
Version 9.1.A.0.490
Mobile is Rooted and got SuperSu and Busybox...
Is there someone who can lead me to the right direction or even maby can help me personally ?
I'm doing this question thread only cuz i have ran out of options so please help !!!
I would suggest using PhilZ Touch (based on CWM) as CWM isn't maintained anymore for our devices. See http://forum.xda-developers.com/showthread.php?p=50524063 for instructions
Sent from my LT30p using xda app-developers app
Mad Marty said:
I would suggest using PhilZ Touch (based on CWM) as CWM isn't maintained anymore for our devices. See http://forum.xda-developers.com/showthread.php?p=50524063 for instructions
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
Thanks for you're reply.
Ive done exactly as it says.
I think step 5 is when u have rebooted the devise thou ive done that but it just boots up normal and i dont see any flash gordon app comming up at start !
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu <--------------- Doesent work !!!
In other words you're suggestion does not work for me...
Solution
LilleJohn said:
Thanks for you're reply.
Ive done exactly as it says.
I think step 5 is when u have rebooted the devise thou ive done that but it just boots up normal and i dont see any flash gordon app comming up at start !
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu <--------------- Doesent work !!!
In other words you're suggestion does not work for me...
Click to expand...
Click to collapse
I got it to work by flashing another kernel that does not work to boot up the phone thou it can come in so i can flash zip files.
After that i flashed the FTF kernel file that i hade from the begginning and now i got thePhilZ Touch 6
Thanks for the tip about the Philz Touch kernel anyways thou it did not work just to follow the instructions of that thread...
LilleJohn said:
Thanks for you're reply.
Ive done exactly as it says.
I think step 5 is when u have rebooted the devise thou ive done that but it just boots up normal and i dont see any flash gordon app comming up at start !
1. Root your device
2. Install modified Flash Gordon app (no busybox installation needed)
3. Download this recovery to SDcard
4. Launch the app and allow it root access
5. Tap "select zip", find the zip, "flash now"
6. Don´t try to reboot with the app, but do regular reboot in power menu <--------------- Doesent work !!!
In other words you're suggestion does not work for me...
Click to expand...
Click to collapse
No need to shout at people when you want them to help you...
You should not reboot at step 5 (using the app), but in stead read step 6 and reboot normally (powerbutton -> shutdown/reboot -> start device). You don't automatically enter recovery upon reboot, and remember, recovery is not an app. When booting, press the volume up button when the LED turns pink, if you installed correctly you will enter recovery.