so my galaxy note is rooted and was working fine until yesterday i plugged it in for charge and then when i took it off and tryed to turn it on it would not turn on it just comes up with the samsung galaxy note n7000 logo and when i press the 3 button combo it comes with WARNING!! a custom os can cause crictical blah blah and press volume up to contine and down to restart it's not coming with android recovery?
I would heavily appreciate any help as this is my daily driver!
Thanks
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
azzledazzle said:
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
Click to expand...
Click to collapse
Oh ****. Yeah i got it wrong lol Thanks for that mate!
right i've done it right this time and i wiped cache partition and davlik cache but it is still stuck on the galaxy note logo. help?
were you on ICS or GB ??
Id suggest to try and flash stock GB via ODIN, and if it still fails to boot, send it off for repair to Samsung
Flash any gb stock rom via odin...
Sent from my GT-N7000 using XDA Premium App
I'm on ICS and it's the official version i'd rather not send it to samsung as it is rooted but how do i flash a new rom with odin any main steps or tuts?
Thanks for replying!
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Thank your very much. I'm Downloading now, i'll post back how i get on!
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Sorry for being such a noob but i have downloaded both files and connected phone with laptop and odin where do i load the file that i have downloaded?
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
azzledazzle said:
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
Click to expand...
Click to collapse
It's a ZIP file and PDA requires a .tar file?
open it up There will be a .tar file inside it, Extract it and then load it into odin
I would highly recommend to flash Stock GB rom. Root it and flash any custom rom you want to..
You can find all GB stock Roms here :-
http://forum.xda-developers.com/showthread.php?t=1424997
How to install :-
Check here :- http://forum.xda-developers.com/showthread.php?t=1329360
Hope it helps.....
azzledazzle said:
open it up There will be a .tar file inside it, Extract it and then load it into odin
Click to expand...
Click to collapse
:silly: me!
done it now it's installing Thanks you very much people! appreciate your help!
Related
Guys right now i m using JPH in India...to avail warranty i need to get back to DDJG4 which is the official software thru kies...pls help me how to get back to DDJG4 thru ODIN and pls give in details...sorry but i m new so i dont knw the method...tnx...
justsimple1 said:
Guys right now i m using JPH in India...to avail warranty i need to get back to DDJG4 which is the official software thru kies...pls help me how to get back to DDJG4 thru ODIN and pls give in details...sorry but i m new so i dont knw the method...tnx...
Click to expand...
Click to collapse
Download stock firmware from http://www.samfirmware.webs.com/
Download ODIN and keep ur phone in download mode....
connect ur phone to PC...
use odin and take ur downloaded firmware in it and select repartition and press start over that's it.........
kingharsha said:
Download stock firmware from http://www.samfirmware.webs.com/
Download ODIN and keep ur phone in download mode....
connect ur phone to PC...
use odin and take ur downloaded firmware in it and select repartition and press start over that's it.........
Click to expand...
Click to collapse
tnx...ill try this...bt in wat file should i take the download firmware...i mean pit? pda? modem?...???
Hey justsimple1
Dost rush through things if you are using odin for the first time.
Gather as much info as you can by reading through forum and clear all the doubts
Download firmware and 512.pit file from samfirmware.com and extract
Steps (Which I follow)
start Odin (if on vista/7 right click and start as administrator)
Tick Re-Partition
select 512.pit file
Put phone in download mode (VLm Down + home + power)
Plug in the phone and wait until Odin finds it.
Click "Start"
after some time Odin will display "Reset"
Wait until Odin indicates "Pass".
Plug out your phone, remove the battery, put it back in and put phone to download mode again.
Click "Reset" button in Odin and untick "Re-Partition" box.
DO NOT select PIT file again.
if you have ony one .tar file then click PDA and select file
if three files them
Click "PDA" and select CODE file.
Click "MODEM" and select MODEM file.
Click "CSC" and select CSC file.
Plug in the phone and wait until Odin finds it.
Click "Start" button and wait until phone reboots with the new software version.
This method was originally posted by Richthofen (all credits to him), I have used it sucessfully over several flashes.
Which version of odin is bestv and is there an official site to download it from
Sent from my GT-I9000M using XDA App
I flashed darky's rom with the voodoo lag fix and then stupidly tried to flash over the top my recovery file. now its stuck loading. can't access recovery mode but can access download mode... any ideas?
Just posted this in another thread, with similar issues, try this, should fix it.
--------------------------------
HI,
Try the following, worked for me
1) Go into recovery mode and wipe both cache and partition data
2) go to samfirmware.com and download the original rom for your phone (the one that came with it)... since you don't say what region you're from, I'll give you an example with mine. Mine is from Bell, and factory comes with UGJH2, so i downloaded that with ODIN and the PIT FILE, make sure to extract the TAR file from inside the RAR file. Put all 3 files in the same folder
3) Enter download mode, when the phone is in that state sometimes it's hard to access download, best way is... remove the battery, put it back in, then hold VOL DN + HOME + POWER until you see a working android bot inside a triangle. When you see that, connect your phone to your PC, double click on ODIN, then load the PIT file (CHECK BOX RE-PARTITION leave the others to default) and Select PDA and find the TAR file you extracted in STEP 2... then click on START, it's gonna take a few mins, and even after it's done, it's going to reboot, and it'll stay at the "S" logo for a bit, leave it, then it'll boot.
At least we hope it will.
Keep us posted,
Thank you,
Rodi.
------------------------------------
Can't get into recovery mode only download mode?! I'm on orange uk custom galaxy S Rom 2.1 originally. shall i just follow your steps but use a stock samsung android firmware?
Thanks Alot btw!
Yeah keep going with the download mode, it's very possible that the recovery mode process is not even necessary, but since I have no way of testing, it's doesn't hurt to try.
so get the orig rom, with pit associated with its (u'll see in on sam firmware which pit you need, most likely 512 for stock out of the box).
Keep us posted
Rodi
Fixed!!! flashed the new 2.2.1 firmware as well. is flying thanks for the help
alcurtis93 said:
Fixed!!! flashed the new 2.2.1 firmware as well. is flying thanks for the help
Click to expand...
Click to collapse
i have the same problem as u ..which 2.2.1 firmware did u flash and where to download ?
Cris
Dont worry mate easier to fix than I thought. Go to samfirmwares and go to firmware section and galaxy s and its called I9000 jpu. If you need any more help dont be afraid to ask
Sent from my GT-I9000 using XDA App
Heres the link.... http://www.multiupload.com/PUSOOBQ8K5
Password is samfirmware.com
Sent from my GT-I9000 using XDA App
alcurtis93 said:
Heres the link.... http://www.multiupload.com/PUSOOBQ8K5
Password is samfirmware.com
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks so u much
Hello XDA Community,
I am an 2 year XDA veteran, so i am properly familiar with all things related to XDA.
I currently own a Xperia X10 Mini Pro and a Xperia Mini Pro....
I tinker a lot with these 2 phones. SE phones mainly need fastboot.....
I just brought a Samsung Galaxy Note(SGN) N7000 (India) a few days back and am really excited to run CM9 on it.....
But i have alot of unanswered questions.....
So i just need the community's help...
1. Does the SGN have a stock recovery....????
My cousin has a Galaxy Tab 8.9 and it had a stock recovery. I just flashed a zip to root it and another zip for CWM......
2. What exactly is ODIN....?????
The Tab 8.9 had ODIN with a Recovery but our SGN does not seem to have one.......
3. Is it safe to upgrade to official Samsung ICS......????
There is alot of talk going on in the forum about HARD BRICKING our SGN if we upgrade........
4. What do i exactly have to do to get CWM......????
The guides in Development Section by dr.ketan have me totally confused, though i have rooted my SGN using DoomLord's Kit............
I am new to Samsung devices ant dont know the way they work.....
So any help will be extremely appreciated.......
Thanks.
1 there is a stock rom you can flash it with odin
2 odin allow you to flash your sgn
3 no it is safe
4 you can download it and flash it with odin
If you want a link for your odin or for a rom just post.
Sent from my I9300 using XDA Premium
lhamza said:
1 there is a stock rom you can flash it with odin
2 odin allow you to flash your sgn
3 no it is safe
4 you can download it and flash it with odin
If you want a link for your odin or for a rom just post.
Sent from my I9300 using XDA Premium
Click to expand...
Click to collapse
I used Vol down + home + power while starting up, and the phone booted into ODIN but there is no recovery.....
The screen only shows " Start Downloading"...
What is this........???/
Whereas the ODIN in Tab 8.9 gave options to flash .zips and much more......
Help please......
Thats download mode, you use with odin from your PC.... use Vol up + home + power for recovery
Download mode is mostly used to flash stock roms (afaik) and they can be found http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
amey2606 said:
I used Vol down + home + power while starting up, and the phone booted into ODIN but there is no recovery.....
The screen only shows " Start Downloading"...
What is this........???/
Whereas the ODIN in Tab 8.9 gave options to flash .zips and much more......
Help please......
Click to expand...
Click to collapse
You are talking about download mod just download your rom and put it on odin and start downloading
Sent from my I9300 using XDA Premium
Xalies said:
Thats download mode, you use with odin from your PC.... use Vol up + home + power for recovery
Download mode is mostly used to flash stock roms (afaik) and they can be found http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=-1#modelsa
Click to expand...
Click to collapse
I am on 2.3.6 and i used vol up + home + power and i successfuly entered recovery.......
Thanks...
I just had another question, is there any .zip file that can be flashed to install CWM, meaning a CWM .zip file...............??????????
Thanks very much.
And i also tried updating to official ICS through KIES on PC but the download is very slow (my d/l speed is 1mbps) and it times out at 45-50 %........
Any idea..... ????/
amey2606 said:
I am on 2.3.6 and i used vol up + home + power and i successfuly entered recovery.......
Thanks...
I just had another question, is there any .zip file that can be flashed to install CWM, meaning a CWM .zip file...............??????????
Thanks very much.
And i also tried updating to official ICS through KIES on PC but the download is very slow (my d/l speed is 1mbps) and it times out at 45-50 %........
Any idea..... ????/
Click to expand...
Click to collapse
Yes there is cwm.zip just download rom manager from market and search for install clock world mod recovery.
About the kies problem just use odin not kies.
You can upgrade with odin in 3 min
Sent from my I9300 using XDA Premium
lhamza said:
Yes there is cwm.zip just download rom manager from market and search for install clock world mod recovery.
About the kies problem just use odin not kies.
You can upgrade with odin in 3 min
Sent from my I9300 using XDA Premium
Click to expand...
Click to collapse
Thanks for your reply....
Can you please tell me the exact procedure on how to update from ODIN PC......????
amey2606 said:
Thanks for your reply....
Can you please tell me the exact procedure on how to update from ODIN PC......????
Click to expand...
Click to collapse
ok. first tell me what rom do you want.
and from what country?
lhamza said:
ok. first tell me what rom do you want.
and from what country?
Click to expand...
Click to collapse
I installed ROM Manager from market but there is no recovery for SGN N7000......
I am from India (INU)
I wanted to update to the official Samsung ICS ROM........
ok download rom from here http://www.hotfile.com/dl/156601210/d18d7d5/N7000DDLP8_N7000ODDLP5_INU.zip.html
and odin from attachement
extract the odin file and open it .then choose the pit file .
after the rom finish downloading .
extract it and you well get N7000DDLP8_N7000ODDLP5_HOME.tar.md5
go to odin and click pda then choose the extracted file
then connect your phone in download mode odin will detected (yellow collor )
then press start and wait until odin is finished you can know that with pass
thanks if i helped you
lhamza said:
ok download rom from here http://www.hotfile.com/dl/156601210/d18d7d5/N7000DDLP8_N7000ODDLP5_INU.zip.html
and odin from attachement
extract the odin file and open it .then choose the pit file .
after the rom finish downloading .
extract it and you well get N7000DDLP8_N7000ODDLP5_HOME.tar.md5
go to odin and click pda then choose the extracted file
then connect your phone in download mode odin will detected (yellow collor )
then press start and wait until odin is finished you can know that with pass
thanks if i helped you
Click to expand...
Click to collapse
Thanks but what if i want to install CM9....
they say we need to be on GB to install CM9 and need CWM....
How do i install CWM.........????????
Its not availacle on ROM Manager.....
I tried thishttp://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475 CWM.zip file but i get
" failed to verify whole-file signature".......
Any help on this.....?????
amey2606 said:
Thanks but what if i want to install CM9....
they say we need to be on GB to install CM9 and need CWM....
How do i install CWM.........????????
Its not availacle on ROM Manager.....
I tried thishttp://forum.xda-developers.com/showpost.php?p=26455511&postcount=2475 CWM.zip file but i get
" failed to verify whole-file signature".......
Any help on this.....?????
Click to expand...
Click to collapse
you can install it with odin mobile
http://turbobit.net/download/free/wcsc1f8j8p8c
here is the cwm link http://download.chainfire.eu/163/CF-Root/SGN/CF-Root-SGN_XX_OXA_LPY-v5.3-CWM5.zip?retrieve_file=1
Extract the downloaded file and copy it to your device. Launch Mobile Odin, tap “Open File” and select “tass-recovrery-cwm.tar"
lhamza said:
you can install it with odin
download it from attachement
the same thing choose pda then choose cwm and start
or flash it with odin mobile http://turbobit.net/download/free/wcsc1f8j8p8c
Extract the downloaded file and copy it to your device. Launch Mobile Odin, tap “Open File” and select “tass-recovrery-cwm.tar"
Click to expand...
Click to collapse
This is using ODIN, but how can i install CWM using stock recovery......?????
amey2606 said:
This is using ODIN, but how can i install CWM using stock recovery......?????
Click to expand...
Click to collapse
i change the last post check it
lhamza said:
i change the last post check it
Click to expand...
Click to collapse
ok thanks but i think i am still confused, a lot.....
odin is terrifying me (dont want to brick my note).......
i will try it later.....
XPERIA phones were not so complicated.
thanks for all your help though...... ;-)
you re welcome
Just one thing odin does not brick any device .
I use odin every week. And i never bricked my device.
Just do what i told you and your device will be fine.trust me
Sent from my S9300 using xda premium
lhamza said:
you re welcome
Just one thing odin does not brick any device .
I use odin every week. And i never bricked my device.
Just do what i told you and your device will be fine.trust me
Sent from my S9300 using xda premium
Click to expand...
Click to collapse
I was under the impression that we could install CWM by just flashing a CWM.zip file through Stock Recovery..........................
Moved To Q&A
Please post all questions in the Q&A section
amey2606 said:
I was under the impression that we could install CWM by just flashing a CWM.zip file through Stock Recovery..........................
Click to expand...
Click to collapse
Yes you can do that. Just search for it and you will find it
sent from my S9300 using XDA Premium
i got Samsung Galaxy Note N7000
Baseband N7000XXLR but sometimes unknown
Kernel Version 3.0.15-1068447
BUILD Number : IMM76D.XXLRQ
Running on 4.0.4 ICS
(sorry for my bad english)
im having a hard time on troubleshooting may note. a message pop up "Process System Not responding"
i cant even connect to the wifi because of the touchscreen or the keyboard are not responding, cant even text or access phone contacts, and cant capture photo, the camera is working but i cant capture because the button is not responding. .
i dont know if my note is rooted or anything, i cant even accept >about phone>status (
i dont have cwm, to access recovery,
what should i do?, can you help me?
Flash a safe kernel Hydracore /speedmod then perform a factory reset from setting/backup and restore
Tapatalking on my n7000
msedek said:
Flash a safe kernel Hydracore /speedmod then perform a factory reset from setting/backup and restore
Tapatalking on my n7000
Click to expand...
Click to collapse
can you provide me step by step how?. and where can i DL hydracore and speedmod?
Go to original development section.. If you are rooted then use mobile odin.. If not then use oc odin..
Read Dr ketans toolbox in general section for further information
Tapatalking on my n7000
msedek said:
Go to original development section.. If you are rooted then use mobile odin.. If not then use oc odin..
Read Dr ketans toolbox in general section for further information
Tapatalking on my n7000
Click to expand...
Click to collapse
i already install the HydraCore but still nothing happen, it takes 5mins to boot in " Samsung Galaxy Note n7000" and "Samsung".
Baseband still Unknown
Keyboard still the same,
have you done a factory reset ? If still the same after that,
go to samfirmware.com and download the rom. You current is XXLRQ .. but you can download the latest XXLRT.
Open odin and select the tar.md5 file in PDA
put the phone in download mode and connect to pc.
Start to Flash and let the phone reboot atuomatically.
This will not remove your apps or data but will install all Stock apps again
nokiamodeln91 said:
have you done a factory reset ? If still the same after that,
go to samfirmware.com and download the rom. You current is XXLRQ .. but you can download the latest XXLRT.
Open odin and select the tar.md5 file in PDA
put the phone in download mode and connect to pc.
Start to Flash and let the phone reboot atuomatically.
This will not remove your apps or data but will install all Stock apps again
Click to expand...
Click to collapse
yes, but still nothing happen, i go to samfirmware and search for XXLRT for n7000, but i dont know where my note came from what should i do?
It's on lrq. So its ok to flash lrt. Go ahead
nokiamodeln91 said:
It's on lrq. So its ok to flash lrt. Go ahead
Click to expand...
Click to collapse
its on iraq?
LRQ in small
nokiamodeln91 said:
LRQ in small
Click to expand...
Click to collapse
oh sorry my bad. can you give me a link? i cant find one
http://www.sammobile.com/firmware/?page=3&model=GT-N7000&pcode=DBT&os=1&type=1#firmware
nokiamodeln91 said:
LRQ in small
Click to expand...
Click to collapse
im having a hard time on understanding this "http://forum.xda-developers.com/showthread.php?t=1424997" i dont know where to start
Did you download the firmware from the above thread?.. if yes unzip it and you will get a tar.md5 file. also go to philz thread and download a kernel that is same as the rom you downloaded. put the kernel in the external SD keep the rom file on PC.
now boot into download mode. ( vol dwm + pwr + home till you see N7000 logo and release). you will enter a screen asking for vol up to confirm,. press vol up
open odin on pc and connect the phone to it. the box on the left will show yellow. click on the PDA tab and navigate to the rom file. dont tick anything else other than default what is there, press start and wait for it to finish. phone will autoboot . now check if the phone is working fine or not. ... reply back for more TS
Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.
By the way, saw another option for Steps 5-6:
Step-5: Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! - if for some reason, you do not see the said notification, try another USB port. Also, check for ID:COM port being depicted by a number in yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted XXLT6 firmware folder:
Step-6:
Click the PDA button to select the .tar file extracted earlier.
Click the Phone button, and select file with *modem* in its name (ignore, if this file does not file exist).
Next, click the CSC button, and select file with *csc* in its name (ignore, if this file does not file exist).
Click the PIT button to select the .pit file. (ignore, if this file does not file exist).
Ensure that Auto Reboot and F. Reset Time are the only options selected in Odin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.
Except since I only had the TAR file I ignored the rest so I assumed I was doing it right up to that point. Also, the YELLOW highlight in Odin 3.07, wasn't yellow but kind of light blue.
That was it. All I did. Still, not succesful.
Please help.
Thanks.
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
nokiamodeln91 said:
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
Click to expand...
Click to collapse
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
izmoothski said:
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
Click to expand...
Click to collapse
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
treacherous_hawk said:
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Got it, thank you Sirs you've all been a very big help. I ran into some issues with TW right after completing the install of 4.1.2. Every darn thing was stopping even acore and TW. Was about to chicken out and go back to my safety ICS ROM when I got to read some stuff about needing to Clear/Reset on Recovery mode after any firmware flashing as well as Clearing the Cache so I did. And voila, it worked. I think I'll rest my worrying brain for now on the root. =P
I'll root it next week. I'll just have fun with it for now. Been up playing around with this for over 24hours now. Having too much fun but already drained.
Thank you again for you help!
same situation here...!!!
hello XDA ppl...
I had ICS 4.0.4 and attempted to use PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5.
That took me to the same situation I think... kernel for JB and ICS ROM...
I power on my phone and it gets to a GT-N7000 Note + Yellow Triangle screen and NO MORE!
I can get to PhilZ Recovery Mode or ODIN Download Mode.
That´s all...
I will attempt right now what you told the creator of this thread and update if it helped.
any help is welcome...
FIXED!!!
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
---------- Post added at 03:33 AM ---------- Previous post was at 03:28 AM ----------
juliowong said:
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
Click to expand...
Click to collapse
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
juliowong said:
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Safest way to get to JB with wipe (that is formatting) is to get philz kernel for ICS and then reboot to recovery do factory reset and wipe /system /data /internal storage /cache and then reboot to download mode and flash JB from odin. Else if you dont want to loose data, just boot into download mode and flash JB using odin.
juliowong said:
6. recovery mode.
7. clear data/factory reset.
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Yeah!! May be you want to start by not wiping on a stock ICS kernel.