[Q] Updated ROM Philz JB 4.1.2 XXLT6 via Odin but won't go past samsung gt-n7000 - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hope you guys can help me.
Was updating my ICS (Criskelorom) to JB 4.1.2 XXLT6 ROM of Philz (PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5) via Odin 3.07. Initially had some issues but, managed to get to where Odin resulted in a PASS. On REBOOT I only get up to the Samsung Galaxy GT-N7000 screen with a yellow ! triangle at the bottom. I was able to get to both Recovery and Download modes but would never get passed to homescreen and just stay on black screen.
Did it several times and got worried I'd brick my phone so I ran the ICS zip I had stored on my SD via Recovery mode and was able to get my phone running. Still want to pursue my JB upgrade though but, not sure if I was doing it right. Any help would be much appreciated guys.
Here is what I did...
MADE SURE OF THE FF.:
1) Install USB driver for Samsung Galaxy Note to transfer files between the phone and the computer using download of KIES from Samsung site
2) Enable USB Debugging Mode on the phone to connect the Android device with the computer
3) created a back-up of my contacts only
4) charged to above 80% battery charge
5) The phone should be factory unlocked and not locked to any particular carrier - I had unlocked it during my ICS upgrade from the GB original OS
THEN FOLLOWED THE STEPS:
Step-1: Download PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 for Samsung Galaxy Note to the computer
Step-2: Download Odin 3.07 which will help to install the root package on the phone. Extract the Odin zip to get Odin3 v3.07.exe file with some other files
Step-3: Place the Galaxy Note into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot appears on the phone's screen. Now press the Volume Up button to continue to enter into Download Mode
Step-4: Run Odin3 v3.07.exe as an Administrator
Step-5: Connect the Note to the computer using USB cable while it is in the Download Mode. Wait for some time until Odin detects the phone. When the device is connected successfully, the ID: COM box in Odin will turn yellow with the COM port number. Also, the successful connection will be indicated by a message saying Added in Odin.
Note: If the Added message does not come then try another US port, try the one located at the back side of the computer. If Odin still fails to detect the device then re-install USB driver
Step-6: In Odin, click the PDA button and select the PhilZ-cwm6-XXLT6-XSA-5.06.1.tar.md5 file
Step-7: Now configure the Odin settings. Ensure that the Auto Reboot and F.Reset Time checkboxes are selected in Odin. As for the Re-Partition, uncheck the option
Step-8: Once everything is set, click the Start button in Odin. The installation should begin now and would take about few minutes to complete
Step-9: When the installation process is completed the phone will restart automatically. And soon a PASS message with green background will appear in the Odin indicating successful installation. After the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer
Was able to reach Step-9 but my phone would not get to home screen.
Please help me with any advise anyone can give me?
thanks.

By the way, saw another option for Steps 5-6:
Step-5: Connect your Note N7000 with your PC using a data cable. Once the device is successfully connected, you will see a notification in Odin in the bottom left saying Added!! - if for some reason, you do not see the said notification, try another USB port. Also, check for ID:COM port being depicted by a number in yellow to make sure that you have successfully added your device.
Select the following files in Odin at their respective tabs from extracted XXLT6 firmware folder:
Step-6:
Click the PDA button to select the .tar file extracted earlier.
Click the Phone button, and select file with *modem* in its name (ignore, if this file does not file exist).
Next, click the CSC button, and select file with *csc* in its name (ignore, if this file does not file exist).
Click the PIT button to select the .pit file. (ignore, if this file does not file exist).
Ensure that Auto Reboot and F. Reset Time are the only options selected in Odin window. Also ensure to select Re-Partition checkbox only if you are using a .pit file.
Except since I only had the TAR file I ignored the rest so I assumed I was doing it right up to that point. Also, the YELLOW highlight in Odin 3.07, wasn't yellow but kind of light blue.
That was it. All I did. Still, not succesful.
Please help.
Thanks.

Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.

nokiamodeln91 said:
Phew! That's a lot to read.. The file you are trying to flash is just a kernel not a whole rom. That's why your phone after the flash has a JB kernel and ICS rom. That's why the phone does not boot. To upgrade to JB, download a stock rom from sammobile.com and flash it using Odin the same way just in PDA of Odin.
Click to expand...
Click to collapse
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!

izmoothski said:
Sorry about the read. =)
Was thinking I'd rather be complete than have anyone helping need to ask more clarifications to help me. =D
Oh that's why. Thanks for the reply. I will do that.
So I need to get the WHOLE ROM from the site you mentioned. A ROM that is complete, Kernel and all. Actually I thought I did get a complete ROM. Did not realize it was just a Kernel. What would be the best way to determine if a ROM is complete? What is usually the size of the file itself? The one I downloaded was like 8MB so I thought that was pretty big. Kinda looked for awhile for that XXLT6 original JB ROM so didn't stop to think if it was just a Kernel. My bad.
By the way, are the ROMs on Sammobile rooted? Or do I need to root them?
thanks again!
Click to expand...
Click to collapse
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk

treacherous_hawk said:
They are just stock roms, to root again use the philz kernel but for jb this time. Also use the .zip this time instead of tar file, you can flash the zip file from stock recovery itself. You can raed more in philz kernel thread
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Got it, thank you Sirs you've all been a very big help. I ran into some issues with TW right after completing the install of 4.1.2. Every darn thing was stopping even acore and TW. Was about to chicken out and go back to my safety ICS ROM when I got to read some stuff about needing to Clear/Reset on Recovery mode after any firmware flashing as well as Clearing the Cache so I did. And voila, it worked. I think I'll rest my worrying brain for now on the root. =P
I'll root it next week. I'll just have fun with it for now. Been up playing around with this for over 24hours now. Having too much fun but already drained.
Thank you again for you help!

same situation here...!!!
hello XDA ppl...
I had ICS 4.0.4 and attempted to use PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5.
That took me to the same situation I think... kernel for JB and ICS ROM...
I power on my phone and it gets to a GT-N7000 Note + Yellow Triangle screen and NO MORE!
I can get to PhilZ Recovery Mode or ODIN Download Mode.
That´s all...
I will attempt right now what you told the creator of this thread and update if it helped.
any help is welcome...

FIXED!!!
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
---------- Post added at 03:33 AM ---------- Previous post was at 03:28 AM ----------
juliowong said:
AWESOME!!!
My bot is back again!!!
Thanks a lot guys...
This thread worked as a charm. :victory:
1. Odin 3.0.X
2. Factory Firmware
3. Flash it as PDA.
4. No yellow triangle.
5. Removed battery and waited 5 seconds.
6. recovery mode.
7. clear data/factory reset.
Done!
Click to expand...
Click to collapse
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.

juliowong said:
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Safest way to get to JB with wipe (that is formatting) is to get philz kernel for ICS and then reboot to recovery do factory reset and wipe /system /data /internal storage /cache and then reboot to download mode and flash JB from odin. Else if you dont want to loose data, just boot into download mode and flash JB using odin.

juliowong said:
6. recovery mode.
7. clear data/factory reset.
Well... finally I am back to ICS.
Now gotta find a safe way to get it to JB.
Click to expand...
Click to collapse
Yeah!! May be you want to start by not wiping on a stock ICS kernel.

Related

i9000 help from cm9

CM9 nice but not ready .... ok, because I'm a noob I have a big problem. I have my new SGS (i9000 3.2.3firmware) with cf-root 2.6 from here (*http://forum.xda-developers.com/showthread.php?t=788108*). Yesterday put CM9 on it from here (http://forum.xda-developers.com/showthread.php?t=1363593) .. and this morning I do not like it..*so I open cwm and tap to restore from backup ... now my galaxy wont open again... what can i do now??
and odin can see my phone in download mode....
sorry for my bad english, i can speek only greek and german...
did you have a backup to begin with?
if odin can see your phone in download then just flash another rom
It doesn't work because the stock partitions are different to CM9. Flash a stock version of whatever you had before in odin with repartition, then a kernel. Then you should be able to restore your backup from CWM
As posted above. The partitions between CM & stock are different. I did exactly what you did. With the same result.
You can get a stock rom from here: http://www.sammobile.com/firmware/
Once you have a stock rom you need to use Odin to install it. You will need to have all three files & the pit file. (phone, modem, csc, pit - 512).
Make sure Kies is not running & open Odin. Click re-Partition. Click PIT & select your pit file, Click PDA & select file with PDA in name, click phone select file with phone in name, click CSS & select file with CSC in name.
Once you are ready with this start phone in download mode. Once in download mode attach phone to usb cable wait for top left corner to go green & click start.
This can take some time but once complete phone should restart. At this point my phone got stuck (either boot loop or black screen I can't remember)
If this happens don't panic just remove phone from USB & restart odin. Now make sure re-partition is unchecked & select the three previous files again, don't select pit file. Again put phone in download mode (you may need to pull battery first) wait for Odin to be ready & click start. This time when the phone reboots it should start although this can take a little longer than usual.
Once started I always like to reboot a couple times & clear cache & do factory reset in recovery.

[Q] newbie - HELP PLS - bricked?

Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
strangermyself said:
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
First you should t have flash abyss through odin since now you are not rooted and do t have the warranty too, the counter of flashes increased to 1 (look at the download mode small text), for rooting you can use chainfire's tool (in the cf-root kernel thread look for it in devolepment section) next get a stock rooted kernel and flash using the tool (read instructions).
For now use pc odin 1.87 and get a firmware 2.3.6 use the pc odin select the file on PDA and flash it, make sure phone is charged 100% and press start, if it doesn't work then uninstall drivers, reboot machine, reinstall them and kill kies process if present in task manager and then goto download mode connect USB and open pc odin wait for the port to be ready aka green and select file then start.... you should be fine its a soft brick afterall.
Sent from my GT-N7000 using Tapatalk 2
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
strangermyself said:
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
Click to expand...
Click to collapse
When connected to charger make sure phone is off the battery meter will show as soon as you connect, case it doesnt leave it for like 3 hours is fine... next about that ROM redownload. The package cleanup you temp directories in PC and try again if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
REVERSiN said:
... if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
strangermyself said:
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Whiskeyjack4855 said:
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
Dude its a GB rom not superbrick bug in it and he didn't mention LPY yet.
Sent from my GT-N7000 using Tapatalk 2
strangermyself said:
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
Click to expand...
Click to collapse
Sorry for tea doubled post its a dumb app X's
You wipe using the CWM file in the Iss root section, and a normal recovery wipe would do too (aka restore defaults)
Sent from my GT-N7000 using Tapatalk 2
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
strangermyself said:
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
Click to expand...
Click to collapse
If you have the stock recovery, restore default wipes everything.
If you have stock re every and want CWM temporary just to wipe goto n7000 devolepment and check how to root by dr.ketan and get files there
If you have CWM then wipe data, wipe cache, wipe dalvik.... and try. Old download another firmware like kk5.... something else not the new LC1 LX1 releases.... (Latest GB) get an old one to get root easly
Sent from my GT-N7000 using Tapatalk 2

Galaxy note unexpectedly broke?

so my galaxy note is rooted and was working fine until yesterday i plugged it in for charge and then when i took it off and tryed to turn it on it would not turn on it just comes up with the samsung galaxy note n7000 logo and when i press the 3 button combo it comes with WARNING!! a custom os can cause crictical blah blah and press volume up to contine and down to restart it's not coming with android recovery?
I would heavily appreciate any help as this is my daily driver!
Thanks
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
azzledazzle said:
Download mode is Volume DOWN + Home + Power
Recovery mode is Volume UP + Home + Power
Make sure you are doing the right combination.
Click to expand...
Click to collapse
Oh ****. Yeah i got it wrong lol Thanks for that mate!
right i've done it right this time and i wiped cache partition and davlik cache but it is still stuck on the galaxy note logo. help?
were you on ICS or GB ??
Id suggest to try and flash stock GB via ODIN, and if it still fails to boot, send it off for repair to Samsung
Flash any gb stock rom via odin...
Sent from my GT-N7000 using XDA Premium App
I'm on ICS and it's the official version i'd rather not send it to samsung as it is rooted but how do i flash a new rom with odin any main steps or tuts?
Thanks for replying!
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Thank your very much. I'm Downloading now, i'll post back how i get on!
azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=1424997
Download ICS from there, As well as odin, Load all files into odin and connect phone in Download mode, Hit start and job done
Click to expand...
Click to collapse
Sorry for being such a noob but i have downloaded both files and connected phone with laptop and odin where do i load the file that i have downloaded?
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
azzledazzle said:
if it is one single file then it will go into the PDA section. If it comes in 3 files it will go in the respective section, i.e PDA, Phone, CSC.
do not select pit or repartition
Click to expand...
Click to collapse
It's a ZIP file and PDA requires a .tar file?
open it up There will be a .tar file inside it, Extract it and then load it into odin
I would highly recommend to flash Stock GB rom. Root it and flash any custom rom you want to..
You can find all GB stock Roms here :-
http://forum.xda-developers.com/showthread.php?t=1424997
How to install :-
Check here :- http://forum.xda-developers.com/showthread.php?t=1329360
Hope it helps.....
azzledazzle said:
open it up There will be a .tar file inside it, Extract it and then load it into odin
Click to expand...
Click to collapse
:silly: me!
done it now it's installing Thanks you very much people! appreciate your help!

[Q] HELP

i got Samsung Galaxy Note N7000
Baseband N7000XXLR but sometimes unknown
Kernel Version 3.0.15-1068447
BUILD Number : IMM76D.XXLRQ
Running on 4.0.4 ICS
(sorry for my bad english)
im having a hard time on troubleshooting may note. a message pop up "Process System Not responding"
i cant even connect to the wifi because of the touchscreen or the keyboard are not responding, cant even text or access phone contacts, and cant capture photo, the camera is working but i cant capture because the button is not responding. .
i dont know if my note is rooted or anything, i cant even accept >about phone>status (
i dont have cwm, to access recovery,
what should i do?, can you help me?
Flash a safe kernel Hydracore /speedmod then perform a factory reset from setting/backup and restore
Tapatalking on my n7000
msedek said:
Flash a safe kernel Hydracore /speedmod then perform a factory reset from setting/backup and restore
Tapatalking on my n7000
Click to expand...
Click to collapse
can you provide me step by step how?. and where can i DL hydracore and speedmod?
Go to original development section.. If you are rooted then use mobile odin.. If not then use oc odin..
Read Dr ketans toolbox in general section for further information
Tapatalking on my n7000
msedek said:
Go to original development section.. If you are rooted then use mobile odin.. If not then use oc odin..
Read Dr ketans toolbox in general section for further information
Tapatalking on my n7000
Click to expand...
Click to collapse
i already install the HydraCore but still nothing happen, it takes 5mins to boot in " Samsung Galaxy Note n7000" and "Samsung".
Baseband still Unknown
Keyboard still the same,
have you done a factory reset ? If still the same after that,
go to samfirmware.com and download the rom. You current is XXLRQ .. but you can download the latest XXLRT.
Open odin and select the tar.md5 file in PDA
put the phone in download mode and connect to pc.
Start to Flash and let the phone reboot atuomatically.
This will not remove your apps or data but will install all Stock apps again
nokiamodeln91 said:
have you done a factory reset ? If still the same after that,
go to samfirmware.com and download the rom. You current is XXLRQ .. but you can download the latest XXLRT.
Open odin and select the tar.md5 file in PDA
put the phone in download mode and connect to pc.
Start to Flash and let the phone reboot atuomatically.
This will not remove your apps or data but will install all Stock apps again
Click to expand...
Click to collapse
yes, but still nothing happen, i go to samfirmware and search for XXLRT for n7000, but i dont know where my note came from what should i do?
It's on lrq. So its ok to flash lrt. Go ahead
nokiamodeln91 said:
It's on lrq. So its ok to flash lrt. Go ahead
Click to expand...
Click to collapse
its on iraq?
LRQ in small
nokiamodeln91 said:
LRQ in small
Click to expand...
Click to collapse
oh sorry my bad. can you give me a link? i cant find one
http://www.sammobile.com/firmware/?page=3&model=GT-N7000&pcode=DBT&os=1&type=1#firmware
nokiamodeln91 said:
LRQ in small
Click to expand...
Click to collapse
im having a hard time on understanding this "http://forum.xda-developers.com/showthread.php?t=1424997" i dont know where to start
Did you download the firmware from the above thread?.. if yes unzip it and you will get a tar.md5 file. also go to philz thread and download a kernel that is same as the rom you downloaded. put the kernel in the external SD keep the rom file on PC.
now boot into download mode. ( vol dwm + pwr + home till you see N7000 logo and release). you will enter a screen asking for vol up to confirm,. press vol up
open odin on pc and connect the phone to it. the box on the left will show yellow. click on the PDA tab and navigate to the rom file. dont tick anything else other than default what is there, press start and wait for it to finish. phone will autoboot . now check if the phone is working fine or not. ... reply back for more TS

[Q] Stuck on Samsung Logo no Download or Recovery mode

Hey,
i wanted to flash from an unsafe kernel(ZCLP5) to a safe one and got the recent CM10 kernel (Kernel_CM10.1_20130130_Nightly_CWM.zip),
i then went into recovery mode and flashed the zip from sdcard and yeh here i am.
After the samsung logo appears i get a black screen and the software buttons flash once, no way to go into recovery or download mode.
When checking out the logcat with adb and grepping for "error" and "fail" i can see that the device fails to call eglInitialize (EGL_BAD_ALLOC) that, i guess, is initializing the OpenGL ES graphics lib.
So i'm a developer myself but not into android, where do i go from here?
Best greetings and thanks for support in advance.
What Rom did you have before?
I guess CM kernel doesn't work with your Rom (if it's TW).
Did you press the three buttons long enough for getting into recovery or download mode?
Easiest way: If you really do not get into recovery you should download a Stock Rom and install it with PC Odin.
ThaiDai said:
What Rom did you have before?
I guess CM kernel doesn't work with your Rom (if it's TW).
Did you press the three buttons long enough for getting into recovery or download mode?
Easiest way: If you really do not get into recovery you should download a Stock Rom and install it with PC Odin.
Click to expand...
Click to collapse
Hey,
yes i'm sure i pressed them long enough.
I was on one of the first ics releases ported from a galaxy S2 i'm quite sure this one:
http://forum.xda-developers.com/showthread.php?t=1516515
I guess for pc odin i need to be in download mode that is also not accessible :/
Tanks, and greetings.
EDIT:
Oh man somehow i get into download mode now, i swear i tried several times.
So you recommend that i flash stock rom now?
Will heimdall also work instead of odin?
lj_1102 said:
Hey,
yes i'm sure i pressed them long enough.
I was on one of the first ics releases ported from a galaxy S2 i'm quite sure this one:
http://forum.xda-developers.com/showthread.php?t=1516515
I guess for pc odin i need to be in download mode that is also not accessible :/
Tanks, and greetings.
EDIT:
Oh man somehow i get into download mode now, i swear i tried several times.
So you recommend that i flash stock rom now?
Will heimdall also work instead of odin?
Click to expand...
Click to collapse
Yes, heimdall will work I think.Flash a stock GB ROM.
So one of these will do it?
http://forum.xda-developers.com/showthread.php?t=1424997
lj_1102 said:
So one of these will do it?
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
yeah lookout for your country rom
Sent from my GT-N7000 using Tapatalk 2
Thanks for your support guys, after flashing stock rom, the stock launcher was broken but i was able to get to the settings via the status bar and by that enable usb debugging.
Then i pushed and installed clockwork recovery and after that flashed the current cyanogen mod.
:good:
Logo screen and no recovery mode
i installed german stock rom and then my phone wasnt opening properly then i closed phone and went into recovery mode did a wipe reset in CWM mode so damn me stupid i did something i shouldnt now i stuck in logo and cant get in to recovery mode
Desparoux said:
i installed german stock rom and then my phone wasnt opening properly then i closed phone and went into recovery mode did a wipe reset in CWM mode so damn me stupid i did something i shouldnt now i stuck in logo and cant get in to recovery mode
Click to expand...
Click to collapse
don't say that you have the stock kernel..! you might have hard bricked your note please consider the pit file method to recover it http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
don't say that you have the stock kernel..! you might have hard bricked your note please consider the pit file method to recover it http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
yes was stock kernel what ever is that kernel i dont even know its name now the problem is people keep saying install kernel these that but i cant open that damn recovery mode in phone or just stuck in logo menu so sad me my lovely phone diedddddddddddddd
Desparoux said:
yes was stock kernel what ever is that kernel i dont even know its name now the problem is people keep saying install kernel these that but i cant open that damn recovery mode in phone or just stuck in logo menu so sad me my lovely phone diedddddddddddddd
Click to expand...
Click to collapse
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
i dont know how to use that pit my phone cant get into recovery mode if anybody knows it please help me to get out from this or show me a thread that some other people fixed this problem
warfareonly said:
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
Click to expand...
Click to collapse
hello can you be my guide how do i flash stock GB at this point im tottaly mess up with phone right now nobody help here i might lose some thread basically show me and i ll read i m scare to make my phone brick
---------- Post added at 03:52 PM ---------- Previous post was at 03:39 PM ----------
warfareonly said:
If you can go into download mode, flash a stock GB ROM and wipe from 3e recovery (normal recovery)
Click to expand...
Click to collapse
yes i can go on recovery mode and download mode now can u be my guide what to do
Desparoux said:
hello can you be my guide how do i flash stock GB at this point im tottaly mess up with phone right now nobody help here i might lose some thread basically show me and i ll read i m scare to make my phone brick
---------- Post added at 03:52 PM ---------- Previous post was at 03:39 PM ----------
yes i can go on recovery mode and download mode now can u be my guide what to do
Click to expand...
Click to collapse
download the rom from here http://forum.xda-developers.com/showthread.php?t=1424997
then you need to put the phone in download mode and connect to PC.. open odin and it should show that the phone is connected by showing a Yellow Box with COM:X
once this is done, place the rom (tar.md5 file) in the PDA tab (if only 1 rom file) and appropriate places if 3 rom files.
the press start.. the phone will start downloading. let it finish and the phone will reboot.. once done.. boot into recovery and choose factory reset. (GB rom is safe to reset using stock recovery)
nokiamodeln91 said:
download the rom from here http://forum.xda-developers.com/showthread.php?t=1424997
then you need to put the phone in download mode and connect to PC.. open odin and it should show that the phone is connected by showing a Yellow Box with COM:X
once this is done, place the rom (tar.md5 file) in the PDA tab (if only 1 rom file) and appropriate places if 3 rom files.
the press start.. the phone will start downloading. let it finish and the phone will reboot.. once done.. boot into recovery and choose factory reset. (GB rom is safe to reset using stock recovery)
Click to expand...
Click to collapse
THE PROBLEM İS NOW NAND writing start!! stuck what to do now please step by step im sooo noob and try to fix something i get moreee problemmm
Go to the above thread and download the pit file from there. Then in odin select the pit file under pit tab. This will auto tick the repartition option. Then select the rom in pda again. Reboot the phone into download mode and try again.
Freezing on nandwrite start is not a good sign.
nokiamodeln91 said:
Go to the above thread and download the pit file from there. Then in odin select the pit file under pit tab. This will auto tick the repartition option. Then select the rom in pda again. Reboot the phone into download mode and try again.
Freezing on nandwrite start is not a good sign.
Click to expand...
Click to collapse
hey doc all problem is fixed now new problem i did all and then flashed ics rom both way from kies or odin after i install ics its becomes freezing i really wonder why to buy a new sd card no problem for me i ll buy a 32 but why phone freezing* is there any thread to fix that or what is solution or no solution just replace the mboard
What did you do? Repartition?
If that.. Then use a small rom.. Like slimbean or cm roms. You could also try slimwizz. Big roms may not work properly.
nokiamodeln91 said:
What did you do? Repartition?
If that.. Then use a small rom.. Like slimbean or cm roms. You could also try slimwizz. Big roms may not work properly.
Click to expand...
Click to collapse
because they said so its only way to fix or if i did untick repartition will it still flash i wasnt sure there is no fix for that i dont like custom roms i think stock roms not bad about speed especailly 4.0.4 what if 4.1.2 come up ?
In this case, you could try with the J leaks which are small like slimwizz. Stock ICS roms are huge so may cause trouble. But you could try some stock based custom roms out there.

Categories

Resources