Related
Does anybody have this? It looks really sharp (and I'm about to order one) but the only thing holding me back is the top/bottom. It looks like it doesn't cover it properly. Whenever I've dropped a phone and got some scuffs, it's always the top and bottom that take the brunt of it.
If you have this case, could you post some pics? Or provide some insight to the protection? Here is a link to it on Amazon:
http://www.amazon.com/Incipio-MT-143-Feather-Motorola-Bionic/dp/B005DQF7TU
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
envizion58 said:
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
Click to expand...
Click to collapse
Ok ok, I like. Can you post some pics? I've seen a bunch of pics online, but I want a clear view of the top and bottom.
Sent from my DROID BIONIC using xda premium
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
envizion58 said:
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
Click to expand...
Click to collapse
Thanks for the link, just checked it out. I'm still torn. I absolutely LOVE the look and sleekness of it, but I know as soon as I buy it I'll drop my phone and scuff the top. This would anger me
I dropped my x2 three days after purchase and scuffed it all up right at the top. I haven't let this Bionic be naked once - it was covered before I left the store.
It's a damn shame too - because this phone is sexy naked.
Decisions decisions...
Sent from my DROID BIONIC using xda premium
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
I bought the incipio feather a few weeks ago and its by far the best case out there if you like to keep the curve of the phone and you dont want to add an siginificant bulk
dendthoff said:
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
Click to expand...
Click to collapse
Which Cruzer Lite cases did you get?
I for one, love the Feather case...but alas, I contacted Incipio and they have no plans to make one for the extended battery. Does anyone know of a case that is similar to the feather, but fits the extended battery?
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
Thanks for the post - good read.
I researched the case you spoke of and it's very similar to the Verizon gel case I currently have. It definitely provides the right amount of protection, but I'm looking to get that "sexy naked feel" the unprotected Bionic provides.
Here is what I'm thinking. I'm going to order the matte black phantomskinz skin. Cover the top and bottom (the only parts exposed from the incipio feather case) and then rock the incipio. Might be slightly ghetto, but I'm sure I can get it looking good. That will give me the lightweight feel of the incipio case with some protection from nicks and scratches on the top and bottom.
I'll post pics when I make it happen.
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
efingguy said:
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
Click to expand...
Click to collapse
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Just ordered the incipio feather. I'll give my opinions in two days.
mistawolfe said:
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
efingguy said:
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
Click to expand...
Click to collapse
My gel case from Verizon does get very sticky and greasy. Makes me mad.
Sent from my DROID BIONIC using xda premium
Update..
I just noticed my desk dock had a "padding"... it totally fits with this case on!
Got this case today.
Initial impressions:
*Absolutely love the thinness of it. It feels like I don't have a case on. Looks sharp.
CONS:
*No top and bottom protection (I knew this before purchase)
*Back gets smudgey
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
You know what I just realized? When I wrote this post, my phone was in a TPU case. Lol.
I got the smoky argyle one, and definitely loved the appearance and lightweight feel of it. I thought it felt a little janky by the power button (was pretty loose) and there were some leftover nubs from where it was cut - clearly visible against the black background of the screen.
I got some black sandpaper and sanded it down, but it left the case looking like garbage. I got it for $2.95 + $2.95 shipping, so I'm not complaining. I might end up ordering another.
I just got this case, iridescent red one, I agree the top and bottom is exposed but the look and feel of it is very nice. It is very sexy looking as well, doesn't cover anything that shouldn't be covered like holes etc.
The main reason I got this one was that someone said it would fit in the Moto car dock, and it does. However, if I hit a bump some times it pops up justttttt enough to stop charging. Pop it back down and it stays for a while again.
Funny no one else ever mentions this but I live in Florida, and every single black droid I have owned (1, 2, 2global, and now bionic) overheats when going on long trips and using Nav. Can't charge it when it overheats. I wanted to go with Iridescent Red to maybe reflect some of that heat...hope it works.
Also, red and black just go together....
Just got my phone back from getting the screen replaced and need to find something to put it in to keep it safe! Any Suggestions?
Original HTC Desire HD Leather Case
Hi there,
when I got my NS i went to the nearby Electronics Shop and tried the cases they had. The Original HTC Desire HD leather Case fits very well...
do you have the i9020 or i9023? Any type of case you have in mind?
Sent from my Nexus S using XDA App
I really like the cases from this thread. Picked up two of them.
http://forum.xda-developers.com/showthread.php?t=1222925
Sent from my Nexus S using xda premium
The Incipio Feather Case is nice. It doesnt add much bulk, but still protects well.
Why not get a good screen protector and then run without a case. When the battery door gets to the point that its no longer attractive or you want to sell the phone buy a new battery door cover. A new battery door will cost you $7-$12 on eBay.
My Nexus has survived wars and it still looks good w/o a case. Like ^ this guy said, screen protector would suffice. I hate that extra bulk in my pocket.
I've got the trident aegis black-on-black for my NS4G (which I've had since last august) and think it's great. I had never been a "case" guy, and always kept my phones bare, but this phone was just waaaaaay too slippery. The smooth plastic back is one of the worst features of this phone and makes it really hard to hold on to if you're constantly juggling stuff in your hands and on the move. I dropped it a bunch of times in the first few days I had it before I just caved and ordered this case.
It's a two-piece case with a silicone full body case that covers the whole phone, and then a hard plastic outer shell that kind of clamps around the silicone.
The silicone part is supposed to absorb shock when you drop it, I guess. It has tabs that cover the headphone and usb ports, cutouts that are perfect for the camera and speaker, and mic, and is a bit thicker on the corners, which gives me some confidence and makes me think that they thought the design through well. I've dropped it a bunch, and watched my 1.5yr old son throw it to the ground, and no probs.
The plastic part wraps around that and is supposed to be good at reducing risk of damage during "crushing" impact. All I can say is that I actually shut my car's trunk on this phone accidentally and it was absolutely fine. It gives it gives it a sleeker feel and minimizes the "ruberry-ness", too.
It also comes with a clear screen protector that is fine, and I don't even notice. Since the screen is curved most people complain about the fact that screen protectors don't stick well on the edges, which is true, but the lip of the silicone case on the front covers this area, so you don't even notice it. I also don't notice a difference when using the touchscreen.
The silicone part does collect lint, so if you're OCD about that, it'll be annoying, but the protection makes it totally worth it for me. I'll gladly pay $30 for a rock solid case that collects a little lint rather than get insurance at $7.99 x 24 months = $192 over the contract. The one thing that's important to know if you use multiple batteries like I do, is that you have to put the silicon section into the hard plastic section first, pop all the buttons out of their holes on the hard plastic case, and then push the phone into the case. If you try to put the rubber part on the phone first, and then put the hard plastic on, the fit is so tight, it's tough to get the buttons to pop out. It was pretty frustrating before I figured this out, but now it only takes me a few seconds to do a battery swap. Finally, the case does add some bulk to the phone, but I personally don't think it's all that bad. The phone feels more solid in my hand and is much less slippery.
I've been meaning to write a review for this phone in the proper thread, but I don't like to review stuff unless I've really used it. So I pretty much forgot till I saw this post. Maybe I'll go link to this post in that thread too, but if you want pics, I remember seeing them in that thread, and in threads over on androidcentral or androidforums or something. Good luck with the case search.
I grabbed the Ballistic case for my Nexus. It's pretty rugged, stays on very well, and comes off easily when you want it too. Feels very solid in your hands.
corgan1001 said:
I grabbed the Ballistic case for my Nexus. It's pretty rugged, stays on very well, and comes off easily when you want it too. Feels very solid in your hands.
Click to expand...
Click to collapse
Dou you have i9020 or i9023 version?
These are sick... Like the Mercury, but minus the blatant Engrish
http://www.myincipio.com/Google-Nex...Ultralight-Hard-Shell-Case-1065_1566-opt.aspx
Hi all
This is the only case I've seen so far, not in stock yet.
http://www.mobilefun.co.uk/sony-xperia-t-sma6122b-hard-shell-black-p36161.htm
Any more about ?
There are a few on Amazon UK, you seem to need to search for ""xperia t" case" to get them to come up, perhaps because they are so new and not ranked correctly in search
Ordered a TPU one.
Sent from my Nexus 7 using Tapatalk 2
I got mine on eBay.
Check This, http://www.krusell.se/en/products/mse
Could you guys that have already got cases, post a review/some pictures?
I'm on the look out for a good case and I'm sure others would appreciate it too.
LadFromWales85 said:
There are a few on Amazon UK, you seem to need to search for ""xperia t" case" to get them to come up, perhaps because they are so new and not ranked correctly in search
Ordered a TPU one.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Many thanks, ordered the smoke black TPU case from Amazon. Will let people know what it's like when I get it.
jonsmith709 said:
Many thanks, ordered the smoke black TPU case from Amazon. Will let people know what it's like when I get it.
Click to expand...
Click to collapse
Ordered this so far..
http://www.ebay.co.uk/itm/TPU-GEL-RUBBER-CASE-FOR-SONY-XPERIA-T-CLEAR-BLACK-/290774906437?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item43b388f645
got a black S line case as well..though it seems bit flimsy on the sides and constantly snapping around when u use the screen.
powerhdlte said:
ROCK Naked shell Case For Xperia T
Click to expand...
Click to collapse
This looks like it may be the best of the bunch thus far. Gonna order one this weekend.
Got this one also from MobileFun.
I'm hoping a better quality TPU case will come along.
The one I mentioned above from Amazon does the job but its not a good fit. There is a clear gap near the headphone socket viewed from the front, and it doesn't sit flush along the front bottom.
Will keep it safe for now though
Sent from my Nexus 7 using Tapatalk 2
Just reposting something I posted in another thread.
I bought a Terrapin Solid Black Hybrid Rubberised Back Cover / Case / Shell / Shield + 6-in-1 Screen Protector Pack for Xperia T from Amazon and it arrived almost a week earlier than estimated (2 days delivery!)
Best bit is it was only £4 so it's amazing value for money. It doesn't feel cheap at all and the material feels very smooth with a matte finish. Almost the same texture as the T's back case. The fit is perfect too - it snaps on to either sides of the phone with only openings at the top and bottom and the device feels very secure in the case.
The aforementioned sides of the case also raise slightly higher (about a mm or so) than the screen so if you were to rest the phone on a flat surface face down the screen never touches. In regards to accessing the side buttons (Power, Volume controls and Camera button) they're all very easy to press - unless you have fat fingers or overgrown nails.
I highly recommend getting one from Amazon since the delivery came earlier than expected and even if you want something more protective (leather flip case, bumper etc) this is only £4 and makes a great temporary case.
Link to the case can be found herehttp://www.amazon.co.uk/gp/aw/d/B009HRVW7W/ref=mp_s_a_4?pi=SL75&qid=1350000465&sr=8-4
Links to photos I took can be found here.
https://www.box.com/shared/cdk3hwzm0s9tkx98cubb
My apologies if the photos aren't very clear. They were taken with my girlfriend's iPhone 4 - at night - in the kitchen. If you want I can take a few outside tomorrow morning in the sunlight at whatever angles you want. As you can see the case hardly adds any bulk to the phone - about 1.5 mm either side and 1.5 mm on the back.
The Rock naked case is really nice, have no issues with it so far and looks great.
Just bought the Krussel one, very handsome, well fiting and comfortable touch...I really like it and don't regret my money...
Next week i gonna get my Xperia T and i gonna order this case
http://www.ebay.nl/itm/Protect-Sili..._PDA_Taschen_Schutzhüllen&hash=item3f1caf26d3
love the design :good:
Quick question: What kind of case is best for impact protection, a hard case or a TPU case? Also, how badly will each type affect the phone's ability to cool itself? I've never used a case for my phones before, and I'm kind of worried about exposing the softer TPU case to the hot afternoon sun when I use my phone as a GPS, so I would like some advice if possible.
Anderone said:
Just reposting something I posted in another thread.
I bought a Terrapin Solid Black Hybrid Rubberised Back Cover / Case / Shell / Shield + 6-in-1 Screen Protector Pack for Xperia T from Amazon and it arrived almost a week earlier than estimated (2 days delivery!)
Best bit is it was only £4 so it's amazing value for money. It doesn't feel cheap at all and the material feels very smooth with a matte finish. Almost the same texture as the T's back case. The fit is perfect too - it snaps on to either sides of the phone with only openings at the top and bottom and the device feels very secure in the case.
The aforementioned sides of the case also raise slightly higher (about a mm or so) than the screen so if you were to rest the phone on a flat surface face down the screen never touches. In regards to accessing the side buttons (Power, Volume controls and Camera button) they're all very easy to press - unless you have fat fingers or overgrown nails.
I highly recommend getting one from Amazon since the delivery came earlier than expected and even if you want something more protective (leather flip case, bumper etc) this is only £4 and makes a great temporary case.
Link to the case can be found herehttp://www.amazon.co.uk/gp/aw/d/B009HRVW7W/ref=mp_s_a_4?pi=SL75&qid=1350000465&sr=8-4
Links to photos I took can be found here.
https://www.box.com/shared/cdk3hwzm0s9tkx98cubb
My apologies if the photos aren't very clear. They were taken with my girlfriend's iPhone 4 - at night - in the kitchen. If you want I can take a few outside tomorrow morning in the sunlight at whatever angles you want. As you can see the case hardly adds any bulk to the phone - about 1.5 mm either side and 1.5 mm on the back.
Click to expand...
Click to collapse
Got this today and its fantastic, well made and really suits the phone
Glad you like it. I haven't found anything better yet, which could be a good thing - it really is a nice case.
That said, I sent a message to Incipio on their facebook site and I got a response to keep an eye out on their company website in the next 2 weeks or so... I like their other Sony smartphone cases. Another great company is Krusell, they already have cases for Xperia T but they don't seem to deliver to the UK.
Sent from my LT30p using xda app-developers app
http://www.ebay.com/itm/SONY-XPERIA..._MobilePhonesCasesPouches&hash=item19d5f54b80
http://www.obostore.com/rock-big-ci...xperia-t-case-p-10396-c-238.html#.UIYwGrT9Fss
http://www.ebay.com/itm/NEW-GENUINE..._MobilePhonesCasesPouches&hash=item2a247aca69
I got my Rock case last week, and I have to say I love it. It feels tough, while not being obtuse or overbearing size wise. The edges on the screen side are tall enough to prevent the phone from resting on the screen itself when turned over, but don't stick up too much to be in the way.
Yeah I have the white Rock case and it's easily one of the nicest cases I've seen
Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!
i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?
I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app
well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!
one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!
This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium
No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case
The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.
Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium
They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.
LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome
opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html
I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.
I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app
I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.