Database Develop

[TEST BUILD] CM10 Port For Vibrant [V9]

I will no longer be maintaining this port, as I have upgraded to a galaxy s3! If anyone wants to take over and or needs instructions for porting this ROM themselves, just send me a message!
Credits go to DerTeufel1980, be18, and all of the other International Galaxy S devs for Jelly Bean!
This is just a slightly modified version of the build for the International SGS (original thread here: http://forum.xda-developers.com/showthread.php?t=1775169)
Steps for flashing
For V9:
1a) If coming from another rom: wipe data/factory reset/format system/wipe cache/wipe dalvik cache
1b) If coming from previous version: delete folder /data/sys-parts before flashing (you should be fine without wipe, but delteing this folder is important), wipe cache, wipe dalvik cache
2) Flash ROM
3) Flash kernel
4) Flash addon (don't flash gapps from an other rom!)
5) Fix permissions
6) Reboot
Downloads
ROM (V8): http://www.mediafire.com/?zxmw7fulb516lcs
Kernel (Use this kernel for V9): http://rootaxbox.no-ip.org/divers/104/jellybean/Devil3_1.0.4_jb_vibrant_CFS_BLN_VC_20120727.zip
CM10 Addons (Use these addons for V9): http://rootaxbox.no-ip.org/divers/devil_jellybean/addons/cm10_addons_devil-V8b.zip
What Works
- Calls/SMS
- Data
- Wifi
- Camera
- Bluetooth (not tested yet)
- GPS
- Google Now
- Google sound recognition (for indentifying music)
- Everything else that isn't listed below...
What Doesn't Work
- Mounting of external sd card to computer (??)
- Others??
Trouble Shooting:
FOR STATUS 7 ERROR
1. Download the Icy Glitch V14 kernel >http://androtransfer.com/latest/vibrant
2. Put the file in your internet SD and Flash the kernel
DO NOT REBOOT
3. In CWM go to ADVANCED -> REBOOT RECOVERY
4. Follow the normal steps in the new CWM console
~ Thanks Waldos!
- If you experience considerable lag after updating from a previous version, flash the rom again and make sure to wipe data and perform a factory reset in the process.
Change log:
V2
- rom slimmed down and gapps/su fix included (thx to bhu1)
- replaced ear.apk with one supposed to work (user report)
- replaced hw composer with the one from nexus s (this is the jb one, old release was using ics hw composer)
- fixed recording of 720p (upstream fix to media_profiles.xml
V2.1
- Added missing Google Sound Search library (Google Ears)
- Added Gmail back into system applications (for some reason it was left out of V2), and gmail notifications should work now!
- Changed build.prop to reflect that the device is a Samsung Vibrant
- Added stock Jelly Bean boot animation
V3
N/A
V4
- built from latest sources as of today (07/19/2012, 4 pm)
- /datadata partition now working
- google tts working now (pico tts already working before?)
- extended power menu
- more menus in settings (some of them still are not finished and lead to a force close of the settings)
- all kernel settings stick after reboot
- using "data-symlink-script" from RolluS to get everything into the rom many thanks for this.
V5
- based on the last release by pawitp (compiled rom is not booting atm, i hope this gets fixed soon)
- fixed notification sounds
V6
- compiled from sources of 23/07/2012, 2 pm
- new boot animation
- removed apex launcher
- fixed installing bug: no need for delting data/sys-parts anymore
V8
- compiled from sources of 25/07/2012
- moved some files from sys-parts back to system and the other way around (trying to optimize the use of /system space)
V9
kernel (1.0.4):
- hack mfc driver, to give all available mem to an application, if the requested mem is more than the max. available (maybe useful later, does not change anything right now (afaik))
- fix execution of boot-patch.sh, disabled twice execution of init.d, enabled tv-out server for all devices (i9000 already had this)
- battery: fix charging display for car dock
- increase read-ahead on moviNAND
Note: The back button is broken on the notification pull down!
User Videos
Thanks wolfie083188!
_____________________________________________
I will keep this updated! If anyone can help to fix these bugs (especially the Camera bug because it seems to be Vibrant specific!), I would really appreciate it!
~ Go L Den

The vibrant shall get jellybean!!!!!!!!!!!!

What is "cm 10 fix"?
Sent from my SGH-T959 using xda premium

Just flashed all the Fixes/Gapps on the release FE did a hour ago, and they all work.
But yes, same issues as you listed in the OP.

Wow this is so close to actually being a daily rom!
Sent from my SGH-T959 using Tapatalk 2

kevho00 said:
Wow this is so close to actually being a daily rom!
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
I'm actually going to try it out for a whole day tomorrow.
I'm restoring all my apps with titanium right now. Wow that was quick!

I might do it as well. F*ck it. I'm doing the same.
Sent from my SGH-T959 using Tapatalk 2

Great job man,downloading now .

If I didn't need a stable from for work, I would be all over this. I still may give in. See what a few days of testing brings in.
Sent from my SGH-T959 using Tapatalk 2

john9 said:
Great job man,downloading now .
Click to expand...
Click to collapse
Can anyone post some screenies?

Woah Woah woah I got a build prop error!
GT-i9000? I know its a port, but it didn't let me install.
Let me flash i9000 cm9 and try again. I'll be back .

kevho00 said:
Woah Woah woah I got a build prop error!
GT-i9000? I know its a port, but it didn't let me install.
Let me flash i9000 cm9 and try again. I'll be back .
Click to expand...
Click to collapse
Try flashing glitch kernel on the rom you were on, and then flashing this.

xriderx66 said:
Try flashing glitch kernel on the rom you were on, and then flashing this.
Click to expand...
Click to collapse
awesome that worked! Booting now. I'll be testing for the next few days. I'll be back tomorrow. Thanks everyone! Goodnight!

Flashing Glitch kernel then the rom worked, I am going to install the rest of the steps.
Edit: Rebooting here we go!
Stupid Question: How do you take on phone screen shots? Like everyone else does.

kevho00 said:
awesome that worked! Booting now. I'll be testing for the next few days. I'll be back tomorrow. Thanks everyone! Goodnight!
Click to expand...
Click to collapse
Hey can you make sure that Alarm works? I'm using it right now and my alarm is not working.
Actually, no sounds work and I really need my alarm tomorrow, so I guess time to flash back...

It's smooth which is nice. Can't download anything from market this is the error:
(Error retrieving information from server. [RPC: AEC:0]
Sounds works for me.

nafeasonto said:
It's smooth which is nice. Can't download anything from market this is the error:
(Error retrieving information from server. [RPC: AEC:0]
Sounds works for me.
Click to expand...
Click to collapse
Did u flash JB gaps version. Worked for me as well as dound
Sent from my SGH-T959 using xda premium

Yes I flashed everything everything int he exact order from the OP. I forgot to Fix permissions maybe that's why.
How do I take screenies?
Got it.

nafeasonto said:
Yes I flashed everything everything int he exact order from the OP. I forgot to Fix permissions maybe that's why.
How do I take screenies?
Nope still can't..
Click to expand...
Click to collapse
Same as ICS. Vol - and power button
Sent from my SGH-T959 using xda premium

Hey! *I know i was suppose to be gone but I couldn't stop playing with jellybean!* Camera works for me ;D with gaaps installed!
Edit: Auto Rotation is turned off by default. Enable it in settings> accessibility
Sent from my GT-I9000 using Tapatalk 2

[ROM] CM10 Builds WIFI 2012.09.26

I’ve been compiling some Cyanogenmod 10 builds for my tab recently and I've decided to share them here. The Cyanogenmod project is still under heavy development, so there will be bugs. Although I will be testing the wifi builds before I post them I may not be able to catch all bugs before I release the build; install these builds at your own risk and be aware of what you are doing. I take no responsibility for any damage caused by these builds. If I notice small bugs while testing I will make a note of them with the release. I plan on updating these builds every week or so.
Thanks to:
The Cyanogenmod team and pershoot- This is all their work, I am simply compiling their code.
RootzWiki - Providing gapps packages
Changelogs:
If there are major changes I will try to note them along with the builds, but for all other changes refer to the Cyanogenmod code review system: http://review.cyanogenmod.com/#q,status:merged,n,z
For gapps changelogs, refer to the RootzWiki gapps page: http://wiki.rootzwiki.com/Gapps
Builds:
2012.09.26
ROM:
Mirror 1: http://www.mediafire.com/?jbqzc4n7hrvyhc6
Mirror 2: http://d-h.st/7lc
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 0ee6e5aa65f2b203d5893aedcc4349b4
2012.09.16
ROM:
Mirror 1: http://www.mediafire.com/?lh7db75g7vfd0hc
Mirror 2: http://d-h.st/Pvr
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 719c05c28d8815c7c3e0382ce10b5c83
2012.09.01
ROM:
Mirror 1: http://www.mediafire.com/?lm54mos2u690chg
Mirror 2: http://d-h.st/xV3
GAPPS: http://goo.im/gapps/gapps-jb-20120726-signed.zip
MD5: 00ecd9dcde56f399c0ea3fa866f8ef5e
NOTE: Pershoot mentioned in his build notes that the goo.im july 26 gapps caused problems with his installation. I have tested this package on my build and it is working just fine. I think the problem is fixed but if you have issues try the older package.
Instructions:
1. Make a nandroid backup and save it in a safe place.
2. Wipe data, cache, and dalvik cache.
3. Install ROM zip in CWM.
4. Install GAPPS zip in CWM.
5. Reboot
Note: A wipe is probably not required for every single build, but it can't hurt. Make sure you make a backup even if you don't wipe.
If you enjoy these builds, you may wish to make a donation:
Cyanogenmod - http://www.cyanogenmod.com/ - See bottom of page

Nice

Second......
Sent from my ADR6425LVW using Tapatalk 2

Nice to see you back, CoffeeBeans.

TX
Gtalk audio works?
In The rom's Cyano no work

So far so good! Just a quick question. Is there anyway to just theme and change the battery to the circle mod or one like it? Thanks in advance!!

What kernel version is compiled with this build?

Not criticising, but was expecting front camera to work on this

ryanshapiro44 said:
So far so good! Just a quick question. Is there anyway to just theme and change the battery to the circle mod or one like it? Thanks in advance!!
Click to expand...
Click to collapse
If you go into Settings > System > Status Bar there is an option to change the battery status style. Unfortunately the percentage display doesn't seem to work but I'm sure CM will fix that soon. Your best bet for now is probably to enable it on the lock screen under Settings > Lock Screen > Battery status.
GalaxyNinja said:
What kernel version is compiled with this build?
Click to expand...
Click to collapse
2.6.36.4, pershoot hasn't added the 3.1 kernel to the jellybean repository just yet.
Ackoman said:
Not criticising, but was expecting front camera to work on this
Click to expand...
Click to collapse
Does it work on other cyanogenmod builds? If it does I can look into it.

Ackoman said:
Not criticising, but was expecting front camera to work on this
Click to expand...
Click to collapse
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.

njfoses said:
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.
Click to expand...
Click to collapse
I thought coffeebean's rom might have been the latest iteration of this:
http://forum.xda-developers.com/showthread.php?p=30240005#post30240005

If you look at the names. CM= cyanogen. That link is AOSP. Android open source. Totally differwnt

Thank you Coffeebeans, this one is all ready better then the last experimental from pershoot! I find it smoother and with better battery performance!! Sweet

i tried installing this :/ but i got Status 7 error on CWM6 it said some symlinks dont match , im using cwm6 that pershoot included

mrvtec69 said:
i tried installing this :/ but i got Status 7 error on CWM6 it said some symlinks dont match , im using cwm6 that pershoot included
Click to expand...
Click to collapse
I've been using TWRP for a while. No problems so far but I haven't flashed anything since Pershoot's last build on droidbasement.com.

Is there a means to change the items in the notification popup menu (the one in the lower right that pops up when the clock is tapped). I know Maple got is right in AOSP, just not sure what he did. When I make it visible, it seems to truncate some of the options.
Nice work on the ROM.

Getting a lot of screen flicker all the sudden, not sure whats causing it or how to best diagnose it.
Sent from my GT-P7510 using XDA Premium HD app

snakecharmer23 said:
I've been using TWRP for a while. No problems so far but I haven't flashed anything since Pershoot's last build on droidbasement.com.
Click to expand...
Click to collapse
cwm is known for that thats why I switched to twrp I recommend flashing that to the tab then flashing this rom had the same problem

alexige said:
Getting a lot of screen flicker all the sudden, not sure whats causing it or how to best diagnose it.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Yes, that has suddenly started happening to me too

njfoses said:
Not criticizing but you should have researched a bit. Front cam doesn't work yet on CM10.
Click to expand...
Click to collapse
Just want to be sure, can front facing cam will ever work on cm10?. It seems all cm10 rom has been out of development. Cm stop buiding it and pershoot is not updating it supurb build recently. Want to know if jb is very difficult to treat? thanks

CM10 pre-alpha

All credit goes to @HashCode
@dhacker29
Just posting this for all of us at xda
Safe strap latest 3.05.19 and cm10 pre alpha ROM can be found :
http://goo.im/devs/Hashcode/scorpion_mini
Install new safe strap first, then flash cm10 after creating and activating rom-slot-1
Note : ROM may be a bit laggy at first
Known issues : camera broken
WiFi / Bluetooth broken
Headphones / speaker broken
Calls are a bit funky
Video / some 3d games broken
Other then that happy flashing / enjoy
4.1-4.2 *upgrade*
Credit goes to safariking
http://www.mediafire.com/?aldqml4r8jyzm87
Download zip and flash over cm10 for new 4.2 gapps
Inverted gapps :
Credit goes to xlory
http://d-h.st/0b1
Same as above just download zip and flash over cm10
*these are the stock cm10 gapps just inverted not the 4.2 gapps
Then of course , stock jellybean-cm10 gapps :
http://goo.im/gapps/gapps-jb-20121011-signed.zip
At first boot go to settings>performance
Set min cpufreq @ 1ghz and max @ 1.5ghz leave gov on interactive
Enable 16-bit transparency
Disable "surface improvement" dithering
Allow purging of assets
Set zram comp to 26%
Reboot, wait 10 min and reboot again
Also switch launcher or install 4.2 gapps as that launcher seems snappy

tadgerloks said:
All credit goes to @HashCode
@dhacker29
Just posting this for all of us at xda
Safe strap latest 3.05.19 and cm10 pre alpha ROM can be found :
http://goo.im/devs/Hashcode/scorpion_mini
Install new safe strap first, then flash cm10 after creating and activating rom-slot-1
Note : ROM may be a bit laggy at first
Known issues : camera broken
WiFi / Bluetooth broken
Headphones / speaker broken
Calls are a bit funky
Other then that happy flashing / enjoy
4.1-4.2 *upgrade*
Credit goes to safariking
http://www.mediafire.com/?aldqml4r8jyzm87
Download zip and flash over cm10 for new 4.2 gapps
Inverted gapps :
Credit goes to xlory
http://d-h.st/0b1
Same as above just download zip and flash over cm10
*these are the stock cm10 gapps just inverted not the 4.2 gapps
At first boot go to settings>performance
Set min cpufreq @ 1ghz and max @ 1.5ghz leave gov on interactive
Enable 16-bit transparency
Disable "surface improvement" dithering
Allow purging of assets
Set zram comp to 26%
Reboot, wait 10 min and reboot again
Also switch launcher or install 4.2 gapps as that launcher seems snappy
Click to expand...
Click to collapse
I'm very thankful and optimistic for this. Thanks so much.
But unfortunately i need features like Wi-Fi so i must wait until its more stable.
Looking forward to this though!
Sent from my XT907 using xda app-developers app

Is this a fully stable build of safestrap?
Sent from my XT907 using xda premium

jarzy00 said:
Is this a fully stable build of safestrap?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
safestrap is stable. cm10, on the other hand is not, per the bugs in the OP

antp121 said:
safestrap is stable. cm10, on the other hand is not, per the bugs in the OP
Click to expand...
Click to collapse
I understand the idea of safestrap, but I was wondering if you could gimme a quick lowdown on how to use it. I come from a droid 3 and yes safe strap came out for that but I mainly worked with CWM so I'm a lot more familiar with that. Few questions. Do I install recovery once downloaded? And I forgot what safe system is/when it should be used etc. And how to access safe strap to start flashing. All I can think of is bp tools when I think of custom recoveries lol. Thanks in advance!
Sent from my XT907 using xda premium

jarzy00 said:
I understand the idea of safestrap, but I was wondering if you could gimme a quick lowdown on how to use it. I come from a droid 3 and yes safe strap came out for that but I mainly worked with CWM so I'm a lot more familiar with that. Few questions. Do I install recovery once downloaded? And I forgot what safe system is/when it should be used etc. And how to access safe strap to start flashing. All I can think of is bp tools when I think of custom recoveries lol. Thanks in advance!
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Ok, so in the new safestrap, make sure you're rooted, go into the app, install, and reboot. Upon booting, you will see a boot up screen with safe system disabled on it. Go into the recovery option by hitting the recovery button on that screen. You'll go into twrp with safestrap settings. Click the rom slots option in the top left. Then choose the first rom slot. Next, choose the partition size. Depending on your sd card size, pick accordingly. It'll take a little while to make the slot but it will. It should switch to that rom slot upon creation, but if not, just click on the rom slot and hit activate. You'll be able to tell because it'll say rom slot one on the top of the screen. Next, you'll have to install the rom by hitting the install button, navigating to the downloads folder, or wherever you have the rom and swiping to install. Next install the gapps and reboot. The safestrap splash screen should look a lot different and say enabled now. If you've done all this, you're golden
Sent from my XT907 using Tapatalk 2

antp121 said:
Ok, so in the new safestrap, make sure you're rooted, go into the app, install, and reboot. Upon booting, you will see a boot up screen with safe system disabled on it. Go into the recovery option by hitting the recovery button on that screen. You'll go into twrp with safestrap settings. Click the rom slots option in the top left. Then choose the first rom slot. Next, choose the partition size. Depending on your sd card size, pick accordingly. It'll take a little while to make the slot but it will. It should switch to that rom slot upon creation, but if not, just click on the rom slot and hit activate. You'll be able to tell because it'll say rom slot one on the top of the screen. Next, you'll have to install the rom by hitting the install button, navigating to the downloads folder, or wherever you have the rom and swiping to install. Next install the gapps and reboot. The safestrap splash screen should look a lot different and say enabled now. If you've done all this, you're golden
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
I thank you again for your response. I just played around with it a bunch and did a full backup which is always good oh and one more quick question. It should say "safestrap disabled" now because I haven't flashed anything yet right?
Sent from my XT907 using xda premium

jarzy00 said:
I thank you again for your response. I just played around with it a bunch and did a full backup which is always good oh and one more quick question. It should say "safestrap disabled" now because I haven't flashed anything yet right?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
yup. if you wait a bit, im making a guide :3
---------- Post added at 11:06 PM ---------- Previous post was at 10:18 PM ----------
Heres the guide! http://forum.xda-developers.com/showthread.php?p=34248144#post34248144 hope it helps with any problems!

love the devs for this, only thing missing from this amazing phone was cm10

anyone tried this (full ROM version not safestrap) on Aussie Razr M (unlocked bootloader)?
Heck anyone tried safestrap on locked Aussie Razr M?

wintermute000 said:
anyone tried this (full ROM version not safestrap) on Aussie Razr M (unlocked bootloader)?
Heck anyone tried safestrap on locked Aussie Razr M?
Click to expand...
Click to collapse
Tried it on Aussie unlocked boot loader. Works fine, but it's slow as treacle. Needs optimizing to work on RAZR M properly.
Sent from my Nexus 7 using Tapatalk 2

[ROM-AOSP] Official CM10.1 (JB 4.2.2) [NIGHTLIES]

CM10.1 / Jellybean 4.2.2 for the Droid 4
*** IF YOU HAVE A GALLERY FC ISSUE, PLEASE TRY MOVING THE CONTENTS OF "DCIM" FROM BOTH SDCARD AREAS OFF OF THE DEVICE ***
OFFICIAL NIGHTLIES:
http://www.get.cm/?device=maserati&type=nightly
OFFICIAL STABLE BUILDS:
http://www.get.cm/?device=maserati&type=stable
GAPPS:
http://goo.im/gapps (Use CM10.1 - 4.2.2 version at the top - 20130301)
CHANGES:
[05/08]Keyboard backlight, Shift key LED adjustments (WIP)
[05/06]Speaker phone fix
[05/06]GPS cleanup
[05/06]Rotation / accelerometer fix
[03/22]Camera Improvements: Flash working
[03/15]Camera Code Rebase / Bugfixes
[03/06]BT/Speakerphone Fix (Thanks DHacker)
[02/17]CM-10.1 updated to 4.2.2
[02/17]Fixed ROM-SLOT booting for any slot (again)
[02/17]Fixed 2nd-cpu core (now working again)
WHAT'S WORKING:
[03/22]Camera
[03/06]BT
[01/18]MMS
[01/18]Incoming phone call bug fixed
Phone / 4G Data
Wifi
Display rotation has been fixed
Camera should work for images/video[/B]
GPS
WHAT'S NOT WORKING (NOTE: I expect to be able to fix all of these issues, it's just taking some time):
Gallery / Media FC see top of the post for FIX.
HDMI
Dock/Dock Settings
Some random reboots being looked at.
HOW DO I INSTALL?
Requires Safestrap 3.05+
Download the .zip and place it on your SD card
Reboot into recovery, install the .zip file and GAPPS from here: http://goo.im/gapps (use CM10.1 version at the top)
I've always tested with a full wipe and TitaniumBackup restore of apps/data.
Enjoy

Awesome work Hash! Thanks for your continuing development for the D4. I've been checking every day religiously for more news on a more stable version of CM10 and today looks hopeful! Can't wait til these bugs get ironed out.
Thanks!

Thanks Hash! Any info on MMS (workaround, or eta on fix, still getting the "Destination address invalid")? Might want to mention that in the "doesn't work" section.

Thanks a bunch Hash! The work you do here is always much appreciated!!

I've made some screenshots from the latest build.
Looks like almost all works normally, except GSM
LED from flash - OK.

are there any workarounds for incoming call bug?

Gordon01 said:
I've made some screenshots from the latest build.
Looks like almost all works normally, except GSM
LED from flash - OK.
Click to expand...
Click to collapse
Just curious because I noticed this in your screenshots, but it says you only have 840mb of working memory. I know that sometimes memory shows less than installed, but we should have a 1 gig showing as installed memory.

azrael293 said:
Just curious because I noticed this in your screenshots, but it says you only have 840mb of working memory. I know that sometimes memory shows less than installed, but we should have a 1 gig showing as installed memory.
Click to expand...
Click to collapse
This is normal, no matter which phone / ROM you are using
although there is 1GB of RAM, some is reserved for different purpose, like bootloader, video ram, etc....
so the actual usable memory will be less than 1GB

Too bad the d4 doesn't have a gyroscope... no photosphere

OP Updated with a new build for 01/18:
DOWNLOAD:
http://goo.im/devs/Hashcode/maserati/cm10.1
GAPPS:
http://goo.im/gapps (Use CM10.1 - 4.2.1 version at the top)
CHANGES:
[01/18]Incoming phone call bug fixed

Hashcode said:
OP Updated with a new build for 01/18:
DOWNLOAD:
http://goo.im/devs/Hashcode/maserati/cm10.1
GAPPS:
http://goo.im/gapps (Use CM10.1 - 4.2.1 version at the top)
CHANGES:
[01/18]Incoming phone call bug fixed
Click to expand...
Click to collapse
Thanks Hash! You're a badass. Gonna give this a test!
Edit: It seems my keyboard light isn't turning on

Is it complicated to create a GSM Version / GSM Patch ?
Thx, Testdevice

Re: [ROM-AOSP] Unofficial CM10.1 (JB 4.2.1) [01/18: BETA]
Keyboard light is fixed in the next version.
Sent from my XT894 using Tapatalk 2

Hashcode said:
Keyboard light is fixed in the next version.
Sent from my XT894 using Tapatalk 2
Click to expand...
Click to collapse
Please don't mind me asking, but do you have an ETA for the next version?
I ask because they keyboard light is very important for me.

Re: [ROM-AOSP] Unofficial CM10.1 (JB 4.2.1) [01/18: BETA]
Hashcode said:
Keyboard light is fixed in the next version.
Sent from my XT894 using Tapatalk 2
Click to expand...
Click to collapse
Hash, ur awesome!
You mentioned in a prevoius thread that the wifi storm would be fixed. Does this rom have the updated code you mentioned would be in it?
Sent from my XT894 using Tapatalk

Testdevice said:
Is it complicated to create a GSM Version / GSM Patch ?
Thx, Testdevice
Click to expand...
Click to collapse
u have to edit the build.prop
set
ro.mot.lte_on_cdma=0
ro.mot.phonemode.vzw4gphone=0
ro.mot.phonemode.vzwglobalphone=1
ro.telephony.default_network=3
ro.telephony.gsm-routes-us-smsc=0
telephony.lteOnCdmaDevice=0
this will bring up APN options and let u use GSM
an other tip: if u search the developer/performance options u can go to Settings->About->Buildnumber (the last entry in the list)
and touch it 10 times (fast). this should enable the options
Nice work @Hashcode without u the Droid 3 and 4 wouldn`t rock so much
and will the batterybar added to this rom? i know its available as app but its more comfortable as option

Re: [ROM-AOSP] Unofficial CM10.1 (JB 4.2.1) [01/18: BETA]
U r a good dude hash! Thanks for all the hard work u put in on all your projects and our community is lucky to have someone like u.
Sent from my Nexus 7

Hello Guys,
is it possible to set any bootsounds?
Like this: http://www.youtube.com/watch?v=3vLMa5tq1tE
Thx, Testdevice

this rom is incredible!! Sure there are a few bugs here and there, but i can't believe how fast it is!

No phone audio
I just installed a fresh copy of the 1/18/2013 build an I am not getting any phone audio.
I tried with bluetooth, Speaker and from the regular speaker.
Tried turning bluetooth off and rebooting and I get audio back, but as soon as I turn bluetooth back on I get no audio.
Any ideas?

[ROM] CM 11.0 (Android 4.4) for RazrHD XT925/XT926

This is a CM11.0 (KitKat, Android 4.4) ROM for Razr HD.
I'm not responsible by phone bricks of any kind, or any other damage this firmware may cause to you, to your phone or any accessories conected to your phone.
Click to expand...
Click to collapse
This rom requires an unlocked bootloader. Recent versions (July/2014) requires an updated (KitKat) bootloader
DEVELOPERS (razrqcom-dev-team):
EPinter - Kernel Development, Build Setup, XT925 & MB886 Support
DHacker - Kernel Development, Build Setup, XT926 Support
Hashcode - Kernel Development, Build Setup, XT926 Support
Nadlabak - Kernel Development, Build Setup, XT897 Support
Skrilax_CZ - Kernel Development, Build Setup, XT897 Support
Download links and information about what is working can be found on the website:
https://sites.google.com/site/linuxmobileorg/razrhd/cm11
Instructions:
Download the zip (cm-11-*-UNOFFICIAL-epinter-xt*.zip) and copy to your sdcard.
Boot into recovery.
Backup your firmware and data!
Format /system.
Install the firmware (install zip from...).
Install gapps (install zip from...).
Wipe data/cache
Reboot.
Developers builds:
Epinter: http://goo.im/devs/epinter
DHacker: http://androidhosting.org/Devs/Dhacker29/
An updated CMW recovery version is required, download:
http://www.clockworkmod.com/rommanager/
Gapps:
http://wiki.cyanogenmod.org/w/Google_Apps
2014-08-02
Everyone with JellyBean firmware/bootloader should use moto_msm8960_jbbl builds. Users who updated to KitKat firmware/bootloader need to use the moto_msm8960 builds.
2014-07-07
The ROM is being updated to kernel version 3.4, that was already released to RazrM and for XT926. The kernel 3.4 depends on new bootloader version and XT925 doesn't have it yet (a leak exists, you can search xda).
As Nadlabak and dhacker29 already informed, the M8 will be the last release supporting devices with JB bootloader. All nightly builds will support only new bootloader.
Click to expand...
Click to collapse
Sources:
https://github.com/razrqcom-dev-team
https://github.com/CyanogenMod

epinter said:
Be prepared for a lot of bugs, preview build of CM-11.0 for RazrHD XT925:
http://d-h.st/Yby
Soon you will have CM builds for XT926 too.
Click to expand...
Click to collapse
Anxiously waiting the XT926 build

What is the bug list?
Sent from my MB886 using xda app-developers app

EcHoFiiVe said:
What is the bug list?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
This will not be known until people start flashing it and reporting bugs.

epinter said:
Be prepared for a lot of bugs, preview build of CM-11.0 for RazrHD XT925:
http://d-h.st/Yby
CMW recovery version 6.0.4.4 is REQUIRED, or the latest TWRP.
http://www.clockworkmod.com/rommanager/
Soon you will have CM builds for XT926 too.
Click to expand...
Click to collapse
I'll be glad to try this out!... as soon as my nice brick turns back into a phone again!

Thanks you Epinter! Flashing right now and I´ll come back to report bugs..
sorry my english

Gonna try flashing this on AHD. hopefully it works
EDIT: Rejected.

Thanks a lot, Epinter!
Nice to see you around the scene again!
I'll try it tomorrow

wrsmega said:
Gonna try flashing this on AHD. hopefully it works
EDIT: Rejected.
Click to expand...
Click to collapse
I'm gonna give it a shot too.
Edit: it's a no go
Sent from my Atrix HD running Android 4.4

OK. So far so good. Flashed with no issue, neither the rom nor the gapps.
Very smooth. WIFI and radio signals look OK. Downloading all my apps...
After 5mn of testing (!):
- My external SD isn't detected.
- Same transition bug as in a few builds earlier on cm10.2
EDIT:
- All Interface/Menus/Status bar settings are missing
- Some settings are missing from the Camera app (jpeg quality and others)
EDIT2: 20 minutes
No other bug so far. Tested a few apps, are working as expected.
root is OK.
And s**t, that thing is REALLY snappy!.

Hi,
I made a dirty flash.
XT925 (Telcel Mexico)
I was in Carbon nightlies (7.11.13)
Flash ROM over Carbon (CWM 6.0.4.4)
Flash GAPP 4.4
Erase Cache, Erase Dalvik
Boot
Boot without Problems alle Apps working
(Around 70 apps, from whatsapp bbm, rootexplorer, udn lite, asphalt 8,etc)
SD Card not mounted/working
Radio signal works ,WiFi, battery is ok )
GPS locks quickly.
From Carbon have the unlock function with volume keys, that works too. I did not find it in CM, but works.
I flashed superuser.
Till now all is working great. No FC.
Sent from my XT925 using xda app-developers app

Hi guys,
Just flashed here and I´m still testing... Used CWM 6.0.4.4 without any glitches. Flashed Core GAPPS , the minimal one (17mb) with only core code. I also flashed SuperSU 1.6.5 as I don´t like Superuser.
It´s working like a charm!
I didn´t like the launcher, so I exchanged to Nova Laucher as I always used it.
Anomalies found:
- External SDCard doesn´t work.
- Tiles for Radios/GPS/Bluetooth on notification screen doesn´t work to switch the function on-off. It just leads to config screen.
- Sound poping/cracking playing FLAC files. Tried Apollo and PlayerPro. I don´t have any MP3 local to test, will try later. But working flawless with streaming sound. I used 8Track and Cloudaround and the sound is perfect.
Oh, just FYI Viper4Android is working flawlessly without any issue!
For a "first build", it´s almost perfect, just few bugs. Epinter, congratulations!
I´ll test GPS and Bluetooth Audio on car as soon as I´m out for lunch.

Tested this. Works great on my Atrix HD. Video playback and external SD seem to be the only bugs for me. Found myself a new daily driver for now.
Sent from my XT925 using xda app-developers app

No tethering
No GPS
A lot of menu options off
Some 3G lost signals
SMS and MMS ok
It's ok for a preview.

EcHoFiiVe said:
Tested this. Works great on my Atrix HD. Video playback and external SD seem to be the only bugs for me. Found myself a new daily driver for now.
Sent from my XT925 using xda app-developers app
Click to expand...
Click to collapse
I didn't try video playback yet, I'll check it!
For me too, can be a daily driver as it is now!
---------- Post added at 05:23 PM ---------- Previous post was at 05:20 PM ----------
CesarRamina said:
No tethering
No GPS
A lot of menu options off
Some 3G lost signals
SMS and MMS ok
It's ok for a preview.
Click to expand...
Click to collapse
Mate, GPS is wonderful here! Locking less than 5 seconds. Even inside my apartment when usually is lazy to lock sinal!
I also tested bluetooth audio and is working fine.
I'll test tethering.

flight666 said:
I also tested bluetooth audio and is working fine.
I'll test tethering.
Click to expand...
Click to collapse
I retry installation 3 times.
Only with dirty install GPS returns to normal
WIFI and 3G bars still white (not turn blue).
Tethering still down.

CesarRamina said:
I retry installation 3 times.
Only with dirty install GPS returns to normal
WIFI and 3G bars still white (not turn blue).
Tethering still down.
Click to expand...
Click to collapse
Aren't they supposed to be white on KitKat?

CesarRamina said:
I retry installation 3 times.
Only with dirty install GPS returns to normal
WIFI and 3G bars still white (not turn blue).
Tethering still down.
Click to expand...
Click to collapse
Now GPS is normal? If not, try restore a backup where it locks, reboot with it locked then clean flash KK, might work.
I think white status bar icons are a feature of KK, not a bug. It won't go blue as previous versions. Check if your playstore is connecting and your Google account is syncing normal, it's all set.
Tethering is down. Might not been implemented yet.
I checked video recording is working fine so local video playback, using mx player. But streaming video from YouTube app or any other site from web is not working.
And lock screen rotation too, may not be present yet.
Any other feature is awesome.

flight666 said:
Now GPS is normal? If not, try restore a backup where it locks, reboot with it locked then clean flash KK, might work.
I think white status bar icons are a feature of KK, not a bug. It won't go blue as previous versions. Check if your playstore is connecting and your Google account is syncing normal, it's all set.
Tethering is down. Might not been implemented yet.
I checked video recording is working fine so local video playback, using mx player. But streaming video from YouTube app or any other site from web is not working.
And lock screen rotation too, may not be present yet.
Any other feature is awesome.
Click to expand...
Click to collapse
Tks.
I know there is some bugs, and CM 11 almost is ok.
But something very wrong happened. I lost wifi. Not turn on. No connection anymore. I put sotck system by rsdlite, but even that, wifi not turn back. WIFI-AP not turn on too. I think it burned. Is there some way to test if really burned?
Tks again.

dhacker29 solved the SD-card issue for AOSP