All credit goes to @HashCode
@dhacker29
Just posting this for all of us at xda
Safe strap latest 3.05.19 and cm10 pre alpha ROM can be found :
http://goo.im/devs/Hashcode/scorpion_mini
Install new safe strap first, then flash cm10 after creating and activating rom-slot-1
Note : ROM may be a bit laggy at first
Known issues : camera broken
WiFi / Bluetooth broken
Headphones / speaker broken
Calls are a bit funky
Video / some 3d games broken
Other then that happy flashing / enjoy
4.1-4.2 *upgrade*
Credit goes to safariking
http://www.mediafire.com/?aldqml4r8jyzm87
Download zip and flash over cm10 for new 4.2 gapps
Inverted gapps :
Credit goes to xlory
http://d-h.st/0b1
Same as above just download zip and flash over cm10
*these are the stock cm10 gapps just inverted not the 4.2 gapps
Then of course , stock jellybean-cm10 gapps :
http://goo.im/gapps/gapps-jb-20121011-signed.zip
At first boot go to settings>performance
Set min cpufreq @ 1ghz and max @ 1.5ghz leave gov on interactive
Enable 16-bit transparency
Disable "surface improvement" dithering
Allow purging of assets
Set zram comp to 26%
Reboot, wait 10 min and reboot again
Also switch launcher or install 4.2 gapps as that launcher seems snappy
tadgerloks said:
All credit goes to @HashCode
@dhacker29
Just posting this for all of us at xda
Safe strap latest 3.05.19 and cm10 pre alpha ROM can be found :
http://goo.im/devs/Hashcode/scorpion_mini
Install new safe strap first, then flash cm10 after creating and activating rom-slot-1
Note : ROM may be a bit laggy at first
Known issues : camera broken
WiFi / Bluetooth broken
Headphones / speaker broken
Calls are a bit funky
Other then that happy flashing / enjoy
4.1-4.2 *upgrade*
Credit goes to safariking
http://www.mediafire.com/?aldqml4r8jyzm87
Download zip and flash over cm10 for new 4.2 gapps
Inverted gapps :
Credit goes to xlory
http://d-h.st/0b1
Same as above just download zip and flash over cm10
*these are the stock cm10 gapps just inverted not the 4.2 gapps
At first boot go to settings>performance
Set min cpufreq @ 1ghz and max @ 1.5ghz leave gov on interactive
Enable 16-bit transparency
Disable "surface improvement" dithering
Allow purging of assets
Set zram comp to 26%
Reboot, wait 10 min and reboot again
Also switch launcher or install 4.2 gapps as that launcher seems snappy
Click to expand...
Click to collapse
I'm very thankful and optimistic for this. Thanks so much.
But unfortunately i need features like Wi-Fi so i must wait until its more stable.
Looking forward to this though!
Sent from my XT907 using xda app-developers app
Is this a fully stable build of safestrap?
Sent from my XT907 using xda premium
jarzy00 said:
Is this a fully stable build of safestrap?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
safestrap is stable. cm10, on the other hand is not, per the bugs in the OP
antp121 said:
safestrap is stable. cm10, on the other hand is not, per the bugs in the OP
Click to expand...
Click to collapse
I understand the idea of safestrap, but I was wondering if you could gimme a quick lowdown on how to use it. I come from a droid 3 and yes safe strap came out for that but I mainly worked with CWM so I'm a lot more familiar with that. Few questions. Do I install recovery once downloaded? And I forgot what safe system is/when it should be used etc. And how to access safe strap to start flashing. All I can think of is bp tools when I think of custom recoveries lol. Thanks in advance!
Sent from my XT907 using xda premium
jarzy00 said:
I understand the idea of safestrap, but I was wondering if you could gimme a quick lowdown on how to use it. I come from a droid 3 and yes safe strap came out for that but I mainly worked with CWM so I'm a lot more familiar with that. Few questions. Do I install recovery once downloaded? And I forgot what safe system is/when it should be used etc. And how to access safe strap to start flashing. All I can think of is bp tools when I think of custom recoveries lol. Thanks in advance!
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Ok, so in the new safestrap, make sure you're rooted, go into the app, install, and reboot. Upon booting, you will see a boot up screen with safe system disabled on it. Go into the recovery option by hitting the recovery button on that screen. You'll go into twrp with safestrap settings. Click the rom slots option in the top left. Then choose the first rom slot. Next, choose the partition size. Depending on your sd card size, pick accordingly. It'll take a little while to make the slot but it will. It should switch to that rom slot upon creation, but if not, just click on the rom slot and hit activate. You'll be able to tell because it'll say rom slot one on the top of the screen. Next, you'll have to install the rom by hitting the install button, navigating to the downloads folder, or wherever you have the rom and swiping to install. Next install the gapps and reboot. The safestrap splash screen should look a lot different and say enabled now. If you've done all this, you're golden
Sent from my XT907 using Tapatalk 2
antp121 said:
Ok, so in the new safestrap, make sure you're rooted, go into the app, install, and reboot. Upon booting, you will see a boot up screen with safe system disabled on it. Go into the recovery option by hitting the recovery button on that screen. You'll go into twrp with safestrap settings. Click the rom slots option in the top left. Then choose the first rom slot. Next, choose the partition size. Depending on your sd card size, pick accordingly. It'll take a little while to make the slot but it will. It should switch to that rom slot upon creation, but if not, just click on the rom slot and hit activate. You'll be able to tell because it'll say rom slot one on the top of the screen. Next, you'll have to install the rom by hitting the install button, navigating to the downloads folder, or wherever you have the rom and swiping to install. Next install the gapps and reboot. The safestrap splash screen should look a lot different and say enabled now. If you've done all this, you're golden
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
I thank you again for your response. I just played around with it a bunch and did a full backup which is always good oh and one more quick question. It should say "safestrap disabled" now because I haven't flashed anything yet right?
Sent from my XT907 using xda premium
jarzy00 said:
I thank you again for your response. I just played around with it a bunch and did a full backup which is always good oh and one more quick question. It should say "safestrap disabled" now because I haven't flashed anything yet right?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
yup. if you wait a bit, im making a guide :3
---------- Post added at 11:06 PM ---------- Previous post was at 10:18 PM ----------
Heres the guide! http://forum.xda-developers.com/showthread.php?p=34248144#post34248144 hope it helps with any problems!
love the devs for this, only thing missing from this amazing phone was cm10
anyone tried this (full ROM version not safestrap) on Aussie Razr M (unlocked bootloader)?
Heck anyone tried safestrap on locked Aussie Razr M?
wintermute000 said:
anyone tried this (full ROM version not safestrap) on Aussie Razr M (unlocked bootloader)?
Heck anyone tried safestrap on locked Aussie Razr M?
Click to expand...
Click to collapse
Tried it on Aussie unlocked boot loader. Works fine, but it's slow as treacle. Needs optimizing to work on RAZR M properly.
Sent from my Nexus 7 using Tapatalk 2
Related
Many people have been saying that the ICS Theme for the Bionic has been bootlooping and softbricking their D3. With the help of my friend Cush2Push, we have created a ICS ROM with lots of ICS changes and will add more over time. It's still in it's pre-mature form.
Without further ado, I present to you..
ZERO narcotICS
v0.3-fixed no launcher black screen on startup
v0.2-fixed some FC's, this ROM has the same issues as CM7 until we get it fixed but in the meantime it's faster than CM7
v0.1-Initial release-based on CM7 should be faster than CM7 as time progresses
-ICS themed
THIS ROM WILL HAVE SIMILAR/EXACT BUGS/ISSUES THAT THE CM7 BUILD BY HASHCODE HAS SINCE IT IS BASED OFF OF HIS DEVICE TREE
this rom contains:
-zero settings thanks to cush 2push
-ics theme thanks to liquid
-only CORE google apps
-faster and more features than cm7
known issues:
-phone fcing during call but call still going through
-broken camera
-broken torch
-wonky audio
that said I wouldn't use this as my daily as its still in dev stage
DOWNLOAD LINK:
v0.3 DOWNLOAD (Fix for Zero settings FC'ing, download this and flash):
Install Instructions:
1. Place the .zip file on your internal or external SD Card (Doesn't matter)
2. Boot into Recovery.
3. Turn on Safe System
4. WIPING IS REQUIRED., FORMAT SYSTEM
5. Choose Install zip from either your internal or external SD Card, depending where you placed it.
6. Reboot.
Thanks to cush2push (from TeamLiquid) for compiling.
Thanks to Team Liquid, for all their development.
Thanks to Hashcode! For giving us his github and device tree
Thanks to all the others that I didn't mention, if you're name isn't mentioned and you would like to be thanked, post below and i'll be happy to thank you .
If you would like to donate to my work I would appreciate it
http://goo.gl/yuHWi
Downloading right now! Will tell you how it goes. Thanks!
Edit - If possible, you should try and add Jewremy's battery. A lot of people really like the v5 including myself, but also really like most of the features and ICS like the notification bar gradient and his mod takes that out. As well as the blue glow.
Downloading !
Sweet kshen1. Ill be using this later.
Sent from my DROID3 using XDA App
nice to see more roms for the D3
When i try to flash it it says operation aborted.
Looks sweet, waiting for 2.0 to finishing upping
Sent from my DROID3 using xda premium
VincentDHam said:
When i try to flash it it says operation aborted.
Click to expand...
Click to collapse
Yeah I've found that out fixing now
kshen1 said:
Yeah I've found that out fixing now
Click to expand...
Click to collapse
Oh ok, I thought i was doing something wrong.
Yep, same problem here. Can't wait to see it when fixed, though!
Me either!
Wow, this looks great. Can't wait for it!
LOVE THE NAME!!! +10000000000000000000000
cant wait to flash...
Ohh **** this is messed up, it flashed alright but couldn't get past the add account. It just fc's and restarts and the buttons don't do anything. So I had to click the speech button on the keyboard and it opened the browser and downloaded hash codes bootstrapper and do a nandroid backup. I would of booted into bp tools but I tried and it just restarted.
Sent from my DROID3 using XDA App
Flashed and theme didn't do well. The battery didn't port over and for some reason it didn't have blur with it? So I can't comment on how the blur did.
Sent from my DROID3 using Tapatalk
How can you make a backup without an external sdcard?
Sent from my DROID3 using XDA App
jojo4747 said:
How can you make a backup without an external sdcard?
Click to expand...
Click to collapse
use hashcodes bootstrap...u can choose internal or external
flashed after a wipe and no settings, dialer, pulldown
adb'ed bootstrap, restored backup, flashed again w/o wipe and dialer and settings work. i put the systemui in from darkdroid to get pulldown
Mine flash with no problems. Waiting for updated version.
Sent from my DROID3 using xda premium
Which one? The tweaked cwm, or the safestrap?
Sent from my DROID3 using XDA App
I am please to announce an unofficial build of Android 4.04 (CM9), Ice Cream Sandwich (ICS) for the Galaxy Tablet 10.1v (the forgotten one), GT-P7100.
PLEASE READ ALL THE INSTRUCTIONS
You do this at you own risk. I cannot be held responsible if you brake something.
This is an alpha build, what does that mean?
It is not feature complete.
It will contain bugs.
It will not have everything working 100%, do not complain about something is not working.
What is not working:
Camera
Tether
Battery usage data
When trying to unlock tablet the touch screen sometimes does not respond. When you press lock (power) it just dims screen. Let the tab go to sleep itself and try it again. Keep doing until it works, it does sometimes take a while to get back, or force hard reboot.
Screens flashes to black when you login to tab
If you have flashed a 7500 modem to your TAB the signal strength will not work correctly. (working on a fix, I hope)
What is working:
3g
Wifi
HQ Youtube video’s
Android
Install instructions:
You need root
Backup your current tablet via CWM/Recovery
Copy files onto your tab.
You need to install a new recovery.img via fastboot , you should know how to get into bootloader to do fastboot by now, if not see instructions above for root: fastboot flash recovery /path/to/recovery.img
Reboot into recovery,
Wipe/Data reset (very important)
Wipe Cache
Flash ROM,
Flash GAPPS.
Reboot
Enjoy!
Thanks to the flowing people:
Pershoot - Kernel work, Device tree, All around guru, etc. He assisted me a lot.
The CyanogenMod team for the wonderful cm9 experience.
Makbil - Assisting with testing.
Codeworx for pointing me in the right direction to get 3g working.
Seo, He assisted me a lot.
If I missed someone let me know.
The Wife and kids, putting up with me with all my late nights.
changelog: 02/05/2012
Latest CM9 upstream changes
Latest kernel fixes from pershoot, including SoD.
changelog: 02/04/2012
CM9 Android 4.04 update
Latest kernel fixes from pershoot
changelog: 30/03/2012
core: remove extraneous wifi fw - pershoot
overlay: fix tether when using NL80211/HOSTAPD - pershoot
core: remove extraneous libnv/axf files - pershoot
Kernel Changes: - pershoot
[**]defconfig: ics: enable remaining PPP options and L2TP
[**]net: backport/sync l2tp with moto's 2.6.39
[**]net: backport/sync *ppp* with moto's 2.6.39
[**]sdio: optimized SDIO IRQ handling for single irq
[**]defconfig: ics: set TUN to be in-built and BROADCOM_WIFI_RESERVED_MEM
[**]wireless: bcmdhd: use wlan_mem_prealloc for CUSTOMER_HW_SAMSUNG
[**]video: tegra-ics: sync with ASUS's TF101 ICS kernel source
[**]cfg80211: fix a crash in nl80211_send_station
[**]nl80211/cfg80211: Make addition of new sinfo fields safer
[**]cfg80211/nl80211: Send AssocReq IEs to user space in AP mode
[**]cfg80211: Add nl80211 event for deletion of a station entry
[**]wireless: bcmdhd: import bcmdhd from I-9100 (GSII) Update
[**]wireless: bcmdhd: import wlan_gpio from bcm4330, remove OOB_INTR_ONLY and RDWR_MACADDR (to BCM4330)
[**]Bluetooth: bnep: Fix bad ether addresses
[**]media: video: avp-ics: backport/sync with nvidia's 3.1
[**]media: fix corner case in tegra_mediaserver
[**]arm: tegra (partial): fix numerous warnings
[**]defconfig: ics: enable CFG80211
Latest upstream cm9 Changes as of 28 March 2012
changelog: 20/03/2012
pershoot - kernel fixes(wifi)
changelog: 18/03/2012
kernel fixes/enhancements
core: switch to ASUS's TF101, 9.2.1.11 ICS libs/fw
core: remove extraneous wifi fw
network: change to in-build broadcom bundled FW for STA/P2P
bootanim: set BOARD_CACHE_BOOTANIM
network: wifi: switch to in-build broadcom bundled FW for AP
core: remove extraneous wifi fw
Latest CM9 upstream fixes/enhancements
For Updates:
YOU NEED TO REFLASH GAPPS.
YOU DO NOT NEED TO WIPE AGAIN!
The download link Note: I will keep the same link I will just update it.
Test ROM's available from here: http://droidbasement.com/galaxy/roms/cm9/p3/. Pershoot is providing them. They will disappear from time to time, meaning he is building new test versions. Deal with it.
reserved for future release.
Wow. Great . And how it looks with auto rotation?
Sent from my Galaxy Nexus using XDA App
thanks again for the ICS exp.
Hi isi,
First of all thank you for bringing ICS to the 10.1V.
Before i flash it (wich i surely will) ive got a question....
IF for any reason i wanted to go back to a 3.2 ROM, do i get any problems
with (just a guess) for example bootloaders or something like that.
or is it as simple as flashing stock rom (chainfire's).
thanks again......its gonna be late tonight
edit: what do you mean by ïnstall NEW recovery"...im running latest cwm from pershoot's blog.
is that ok or do i have to flas another?
richard2311 said:
Hi isi,
First of all thank you for bringing ICS to the 10.1V.
Before i flash it (wich i surely will) ive got a question....
IF for any reason i wanted to go back to a 3.2 ROM, do i get any problems
with (just a guess) for example bootloaders or something like that.
or is it as simple as flashing stock rom (chainfire's).
thanks again......its gonna be late tonight
edit: what do you mean by ïnstall NEW recovery"...im running latest cwm from pershoot's blog.
is that ok or do i have to flas another?
Click to expand...
Click to collapse
Yes you can go back.
Ok is it neccasery to flash recovery.img first.?
I have latest recovery from pershoot installed.
Sent from my GT-P7500 using XDA App
Flash recovery from my download.
Sent from my GT-I9100 using Tapatalk
I get an error in cwm-recovery if I try to flash ROM.
It says I have the wrong device.
I think I have to flash Stock ROM 3.0.1 and than 4.0.3!
Other ideas?
Is that the wrong or right way?
Thankyou Isi
This is brilliant. I will definitely be trying this over the weekend.
Sent from my GT-I9100 using XDA App
Hi Isi,
Just some quick questions.
What to do to return to 3.2 ? - Just flash 3.2 rom ? With Rom Manager ClockworkMod Recovery ?
Aplications from samsung like Email etc what happens to them ?
Can one install them ( samsung Email etc ) from titanium backup or they dont work in ICS?
Isi can i link new files as an alternative download place ?
Thanks
I have thw Problem. After installing in Start Wizard it shows that app is/will be closed. Any idea?
Sent from my Galaxy Nexus using XDA App
danikristijan said:
I have thw Problem. After installing in Start Wizard it shows that app is/will be closed. Any idea?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Did you wipe?
Works like a charm, thank you so much!
Sent from my GT-P7100 using xda premium
derwahreehlers said:
I get an error in cwm-recovery if I try to flash ROM.
It says I have the wrong device.
I think I have to flash Stock ROM 3.0.1 and than 4.0.3!
Other ideas?
Is that the wrong or right way?
Click to expand...
Click to collapse
Did you flash the new recovery? If you did not it will not allow you to install.
Ok works so far for me. It feels smooth and finaly it say's gt-p7100 and not 7500 in the xda app and system info
Sent from my GT-P7100 using XDA App
algzed said:
Hi Isi,
Just some quick questions.
What to do to return to 3.2 ? - Just flash 3.2 rom ?
Aplications from samsung like Email etc what happens to them ?
Can one install them ( samsung Email etc ) from titanium backup or they dont work in ICS?
Isi can i link new files as an alternative download place ?
Thanks
Click to expand...
Click to collapse
Yes, you can go back to 3.2 if you follow the the instructions in the 3.2 thread.
This is stock Android, no Samsung APPS
I do not think you should make alternate available at the moment, it could change often. Let us get one "stable" version first.
Yes i did. Any other idea?
isimobile said:
Did you wipe?
Click to expand...
Click to collapse
Sent from my GT-P7100 using XDA App
I have a big problem...
I have a boot loop, I can not use adb, I don't know how I go to recovery manually and suddenly my fastboot doesn't work :'(
HELP!
derwahreehlers said:
I have a big problem...
I have a boot loop, I can not use adb, I don't know how I go to recovery manually and suddenly my fastboot doesn't work :'(
HELP!
Click to expand...
Click to collapse
fastboot boot c:\path\to\recovery.img
You can always get into fastboot mode. Hold the power button for a while. When the screen goes black, hold volume down too
Sent from my GT-P7100 using xda premium
ramonams said:
fastboot boot c:\path\to\recovery.img
You can always get into fastboot mode. Hold the power button for a while. When the screen goes black, hold volume down too
Sent from my GT-P7100 using xda premium
Click to expand...
Click to collapse
Sure but my PC doesn't see the fastboot device and YES the driver is installed.
CodeNamed Android (CNA)
Jelly Bean Build for
Motorola Atrix
By
cpetersen2791 with assistance from TeamMotoTegra
It's got great options and is a little different than AOKP!
WORKING:
Phone
Data
SMS/MMS working
Camera
Browser Rotation
Wifi (Tether only with Barnacle App-Included)
Build is based on Jokersax 0.1.2 beta with help from CNA for Photon from Th3Bill.
Special thanks to Th3Bill for his assistance on my first Port.
Enjoy
http://www.4shared.com/zip/3ynRdn_3/CNA-jb-08112012-2303.html
http://www.mediafire.com/?9axa2j6r98yy1ar
Usual ROM installation applies.
You should not have to wipe /data if you are already on a JB ROM.
1. Boot into Recovery
2. Wipe /system (/data if your not on a JB ROM)
3. Install ROM
4. Install Gapps
5. Wipe Cache and Dalvik
6. Reboot
Enjoy!
Reserved...I don't know why, but I see other developers do it!
Want to check it out, but is it possible to upload to a site that doesn't require signup?
Oh man, you lighted up my day. Yesterday I was wondering: "Why no one followed CNA project?" then signed up on forum and started to check how I can build it myself... now it's here next day. You've got my gratitude. Will check out asap
THANK YOU!
force closed when i go to Access Point Names.
Nice! Looking forward to trying this. I was a big fan of CNA while it was available on Atrix...
THX:thumbup:
Sent from my Nexus 7 using Tapatalk 2
nvm
Everything running smoothly, camera works well too.
CAn we switch beetween the inetrnal and sdcard?
Awesome! I'm still running the last ICS build of CNA for Atrix. Looks like i'll be upgrading to this soon thank you for your work!
monose1 said:
CAn we switch beetween the inetrnal and sdcard?
Click to expand...
Click to collapse
I haven't tried it. But its under settings, advanced.
Sent from my MB860 using Tapatalk
I assume camcorder is not working, but camera is?
Having a NOT WORKING section may be relevant.
knigitz said:
I assume camcorder is not working, but camera is?
Having a NOT WORKING section may be relevant.
Click to expand...
Click to collapse
Like ANY OTHER JB/ICS ROM...standard non working issues apply due not having proper drivers from Nvidia
Sent from my MB860 using Tapatalk
If you get camera lag, do the following
1) Open camera app
2) Close it
3) Long press home and swipe it away
4) Repeat steps 1-3 a few times (4-5). It should improve after a few times...after you do this initially, it should stick.
Camcorder isn't working yet....could TRY videocam illusion (I will admit that I haven't tried it yet on any JB build, though)
I got bootloop with this, it worked fine for like 20 min and bootloop started. Restored back to cm7, should I try flashing this again? Pretty sure its my phone and not the rom though.
Could it be that rom's clock is everytime at 1000 Mhz?
Also, if you go to rom settings, someplaces it shows as you've running the rom in a photon device.
I have to research in these two issues so i can send a report.
cpetersen2791 said:
CodeNamedAndroid (CNA)
Jelly Bean Build for
Motorola Atrix
By
cpetersen2791 with assistance from TeamMotoTegra
It's got great options and is a little different than AOKP!
WORKING:
Phone
Data
SMS/MMS working
Camera
Browser Rotation
Wifi (Tether only with Barnacle App-Included)
Build is based on Jokersax 0.1.2 beta with help from CNA for Photon from Th3Bill.
Special thanks to Th3Bill for his assistance on my first Port.
Enjoy
http://www.4shared.com/zip/3ynRdn_3/CNA-jb-08112012-2303.html
http://www.mediafire.com/?9axa2j6r98yy1ar
Usual ROM installation applies.
You should not have to wipe /data if you are already on a JB ROM.
1. Boot into Recovery
2. Wipe /system (/data if your not on a JB ROM)
3. Install ROM
4. Install Gapps
5. Wipe Cache and Dalvik
6. Reboot
Enjoy!
Click to expand...
Click to collapse
Camera work only for taking still image. Camcoder error !:crying:
Gapps included?
Sent from my MB860 using xda app-developers app
Th3Bill said:
If you get camera lag, do the following
1) Open camera app
2) Close it
3) Long press home and swipe it away
4) Repeat steps 1-3 a few times (4-5). It should improve after a few times...after you do this initially, it should stick.
Camcorder isn't working yet....could TRY videocam illusion (I will admit that I haven't tried it yet on any JB build, though)
Click to expand...
Click to collapse
Videocam Illusion Pro does work on JB - took a 4 minute video of the NJSP heli taking off - no real lag but it's not in hd either... i would have posted it but its around 100mb in size lol
---------- Post added at 06:32 AM ---------- Previous post was at 06:29 AM ----------
ATRIXXIRTA said:
Gapps included?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
no, use jokers v3, works
DISCONTINUED, SEE DoubleshotROM
DecafEspresso v1.2
FIRST AND FOREMOST
**do this at your own risk**
Features
This is a mostly STOCK ROM with the following changes.
Zipaligned
De-Odexed
Debloated
AOSP Touch/Lock sounds
build.prop speed tweaks
DecafKernel v1.4
init.d support (thanks scrosler!)
Custom bootanimation.zip support
Nexus 7 boot animation
Requirements
Root
Unlocked bootloader
CWM Recovery
You must be on base J1 as described in this thread!
Install
1. BACKUP!
2. Wipe data / factory reset, clear dalvik cache. (Wipe is recommended) [!do NOT format /system!]
This ROM does not make major changes to /system, so this step is VERY important!
3. Flash in CWM.
4. Reboot
5. Hit the THANKS button!
Download
*old thread*
Thanks
Scrosler (ScottsRoms) for his idea for getting ROMs to flash for this device! Be sure to hit thanks on his posts!
ezgoing for all the work we've done together to get things kickstarted on this device.
baliriot for the Nexus 7 boot animation
All the others who've made rooting and modding Android possible!
Make sure you tell them all thanks!
Change Log
v1.2 2012-10-12
Setup a workaround for the battery drain. Custom bootanimation support still exists, however, you may see the stock samsung animation appear for a split second before bootanimation.zip takes over.
Workaround for issue where default governor gets set to performance, causing the battery drain.
DecafKernal v1.4 - Here
v1.1 2012-05-12
Created missing /system/etc/init.d/ directory
Changed bootanimation.zip to Nexus 7 animation
removed ~updater-script and ~build.prop (why there was an extra file of each with '~' in the filename makes me scratch my head.. )
v1.0 2012-04-12
Initial release
This will only work on I705?
Jdgp42 said:
This will only work on I705?
Click to expand...
Click to collapse
Yep. The LTE model only.
MrHyde03 said:
Yep. The LTE model only.
Click to expand...
Click to collapse
cant use this on p3100 then ?
No
Sent from my SCH-i705 using xda app-developers app
Thanks man! It's great to see more dev work on the VZW LTE tabs. Does this rom have a fix for the "volume warning" issue when playing media over line output? My tab cuts volume to 70% and displays a warning about how loud volume can damage your hearing. I use my tab in my car, so it's a right pain to have to adjust the volume every other song.
Updated OP with v1.1.
Xer0daze said:
Thanks man! It's great to see more dev work on the VZW LTE tabs. Does this rom have a fix for the "volume warning" issue when playing media over line output? My tab cuts volume to 70% and displays a warning about how loud volume can damage your hearing. I use my tab in my car, so it's a right pain to have to adjust the volume every other song.
Click to expand...
Click to collapse
I haven't looked at it, but I know what your talking about. I only have to change the volume once on mine, though. I'll see if I can find anything on it.
Hey Hyde...
Love the rom... working great for me.. I got a couple things though..
as a request.. is there anyway you can look into making the ext sd card the main storage device so we can get more room on this tab?
and idk if its just me or not.. but I'm having very bad battery life running this rom.. I love the rom, don't get me wrong.. but my tab is dying overnight for the last few days since I flashed this rom.. I have no idea why? maybe the kernal that is included?
I am looking in to the SD card thing whenever I have time.
I noticed this battery drain too... not sure what it is. I'm gonna be testing it tonight. I doubt its the kernel as the kernel itself is 100% stock. Only mods are to some of the configuration files, not the zimage.
Sent from my SCH-I535 using xda app-developers app
MrHyde03 said:
I am looking in to the SD card thing whenever I have time.
I noticed this battery drain too... not sure what it is. I'm gonna be testing it tonight. I doubt its the kernel as the kernel itself is 100% stock. Only mods are to some of the configuration files, not the zimage.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Ok great.. thanks hyde..
good luck on finding the culprit that is draining our batteries! hopefully you can figure it out
Ok, So I know it's not the kernel. Flahsed it over a restored stock J1 base and battery only drained 1% in 1 hour. So there's something screwy in my ROM.
Scott released a ROM also that isn't too much different than this, and honestly probably better haha. This is my first ROM ever, so go easy on me
Scotts ROM is here http://forum.xda-developers.com/showthread.php?t=2022879. You can flash the DecafKernel (based off of Scotts init.d unsecure kernel) over on top of it for custom boot animation support.
Ok, so it IS my kernel..................... Still looking into it.
Updated OP. Check Change Log for changes. Battery drain workaround so your battery won't die over night.
It's not ur kernel. I been running it for 2 days now. With out charging my tablet. It's j1 update crashing with open source code kernel.. Therefore you can't use this kernel on the j1. Sorry
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
It was actually. And it's based off the J1 unsecure kernel from Scott.
When you unpack the boot.img, under the ramdisk directory there is a file: init.rc
In this file there are several sections:
service powersnd .../.../...
...
service samsungani .../.../...
...
You have to add a 'service bootanim /system/bin/bootanimation' and another group of code that I can't remember off the top of my head. If you remove powersnd and samsungani, OR you remove bootsamsung.qmg and bootsamsungloop.qmg, the kernel defaults to the performance governor. With this in mind, service powersnd, service samsungani, bootsamsung.qmg, and bootsamsungloop.qmg must all remain as part of the ROM. I don't know why, but I've found another thread for the S3 with the same issue. Now I'm sure if it was compiled from source with these modifications it'd be a different story, but I haven't had the time to dig through that yet.
I'm running this latest release with the J1 kernel and J1 system and it's running great
OK I'm pretty stupid I guess but I didn't presume I would have any issues. I tried to go from this ROM to my backup of the J1 using CWM recovery. Now I'm pretty sure I've soft bricked the tablet because recovery wiped system but errored out on writing the /system backup. So I can't restore the backup I have and flashing this ROM again does nothing because its not a full /system.
Anyhow I'm gonna wait till I get home from family dinner and try to break it out of a recovery boot loop with a fresh ODIN flash...
Sent from my Galaxy Nexus using xda app-developers app
That is odd. Perhaps your backup got corrupted? But then cwm should have caught it via md5 check... I've reverted to an older cwm several times and haven't had an issue.
Let us know the what happens.
Sent from my SCH-I535 using XDA Premium HD app
Yeah will do I have been playing with porting cm9 as well before this setback. Not easy stuff for an amateur like me. Its weird I got the exact same error on my nexus when trying to restore. Luckily I have tons of ROMs to flash back to on here. Eating now will check back in a few hours.
Sent from my Galaxy Nexus using xda app-developers app
Yeah ive been trying my brain with cm10 and i cant get anything to boot.. very difficult for us ametures with little direction. Cant find a good reference on porting cm to an unsupported device... frustrating really because im more than willing to do the work but need more information.
Oh well ill keep crunching on it.
Merry Christmas everyone!
Sent from my SCH-i705 using XDA Premium HD app
Yeah I found a few starting points I will let you know if I get a boot after I fix this other thing. Hahaha.
Sent from my Galaxy Nexus using xda app-developers app
DoubleshotROM v1.3
FIRST AND FOREMOST
**do this at your own risk**
Features
Built from VRLJ1 base
Zipaligned
De-Odexed
Debloated
AOSP Touch/Lock sounds
build.prop speed tweaks
Nexus 7 boot animation
Adobe Flash Player 11
150 DPI for a little extra viewing space (Stock - 160)
DoubleshotKernel v1.6 @ 1.70ghz With the following:
+init.d support (thanks scrosler!)
+Custom bootanimation.zip support
*+ I recommend using System Tuner from Play Store for CPU control - System Tuner -
ExtSd2InternalSd - Swaps Internal SD with External SD card (Only test with the 8gb model, should work with others)
*VERY special thanks goes out to mattiadj - original thread from GS3! He created this MOD, I take 0 credit! I just had to modify two numbers, but nothing special. Please, go to his thread and hit thanks on any of his posts!
Requirements
A *VERIZON* Galaxy Tab 2 7.0 SCH-I705
Root
Unlocked bootloader
CWM Recovery
Install
*This is a FULL ROM and /system WILL be wiped during install!*
1. BACKUP!
2. Wipe data / factory reset, clear dalvik cache
3. Flash in CWM
4. Reboot
5. Hit the THANKS button!
v1.3 has issues. Revert to v1.2 for a fully functional ROM
v1.2 - Includes ExtSD2InternalSd
Download v1.2
Doubleshot with no-SD-swap is no longer being supported.
If you want to remove the swap script, go to /system/etc/init.d/ and delete 11ExtSd2InternalSd. Reboot.
Thanks
mattiadj -> ExtSd2InternalSd SD Swap MOD
Scrosler (ScottsRoms)
NEW_BOSS - Lockscreen Wallpaper Zedge.net
All the others who've made rooting and modding Android possible!
Make sure you tell them all thanks!
Bugs
Some play store apps are showing as incompatible.
Change Log
v1.3 2013-02-19
150 DPI for a little extra viewing space (Stock - 160)
v1.2 2013-02-13
Fixed NetFlix! Thanks beans!
Some more minor build.prop tweaks
v1.1 2013-02-01
Some minor build.prop tweaks
v1.0 2012-12-31
Initial release
also mine, just in case
cant wait to try this and see what i can do for all of us verizon gtab2 guys i bought scotts should be here by the weekend!
my first thing im gonna do is make this look as much like AOSP as possible..
Brilliant. I was sad when I saw he got rid of it. Glad to have you!
And if you can give direction once you receive it I'm eager to learn more, but with limited resources for porting to new devices, its difficult.
Welcome!
Sent from my SCH-I535 using XDA Premium HD app
beanstown106 said:
cant wait to try this and see what i can do for all of us verizon gtab2 guys i bought scotts should be here by the weekend!
my first thing im gonna do is make this look as much like AOSP as possible..
Click to expand...
Click to collapse
Great to see you here Beanstown!! I'm running your verizon note 2 rom and loving it... can't wait to see what you have in store for the this tab! I'm sure MrHyde is also very happy to have another great developer here lol
---------- Post added at 09:14 AM ---------- Previous post was at 09:10 AM ----------
hey hyde..
Got this rom up and running.. loving it.. glad you figured out all the /system issues and made a full working rom! congrats!
question on the sdcard swap (also thanks for getting it working) do I have to move all my data from the internal to my external now that its been swapped? or does it just move it over itself?
The sd swap just swaps the mount pointes, you'd have to move your stuff. Keep in mind this runs every boot so when you're in recovery, your external is still your external, and your internal is still your internal.
Make sure you see mattiadj and thank him very little to make work so please, don't thank me for that mod. :good:
Sent from my SCH-I535 using XDA Premium HD app
MrHyde03 said:
The sd swap just swaps the mount pointes, you'd have to move your stuff. Keep in mind this runs every boot so when you're in recovery, your external is still your external, and your internal is still your internal.
Make sure you see mattiadj and thank him very little to make work so please, don't thank me for that mod. :good:
Sent from my SCH-I535 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks Hyde... great rom and the extra storage is awesome..
I thanked him for the great mod... and thanked you for the great rom
I wish this Rom could work for 3113 tab 2
Sent from my HTC One XL using Tapatalk 2
Moved the main DL link to my server. All should be a go now.
MrHyde03 said:
DoubleshotROM v1.0
FIRST AND FOREMOST
**do this at your own risk**
Features
Built from VRLJ1 base
Zipaligned
De-Odexed
Debloated
AOSP Touch/Lock sounds
build.prop speed tweaks
Nexus 7 boot animation
Adobe Flash Player 11
DoubleshotKernel v1.5 @ 1.62ghz With the following:
+init.d support (thanks scrosler!)
+Custom bootanimation.zip support
*+ I recommend using System Tuner from Play Store for CPU control - System Tuner -
ExtSd2InternalSd - Swaps Internal SD with External SD card (Only test with the 8gb model, should work with others)
*VERY special thanks goes out to mattiadj - original thread from GS3! He created this MOD, I take 0 credit! I just had to modify two numbers, but nothing special. Please, go to his thread and hit thanks on any of his posts!
Requirements
A *VERIZON* Galaxy Tab 2 7.0 SCH-I705
Root
Unlocked bootloader
CWM Recovery
Install
*This is a FULL ROM and /system WILL be wiped during install!*
1. BACKUP!
2. Wipe data / factory reset, clear dalvik cache
3. Flash in CWM
4. Reboot
5. Hit the THANKS button!
Download - Includes ExtSd2InternalSd
6f18f57d35d1c999c489134f808688dd
Download - Without ExtSd2InternalSd
961e8e1869f9c68d234ce5d820d4459b
Thanks
mattiadj -> ExtSd2InternalSd SD Swap MOD
Scrosler (ScottsRoms)
NEW_BOSS - Lockscreen Wallpaper Zedge.net
All the others who've made rooting and modding Android possible!
Make sure you tell them all thanks!
Click to expand...
Click to collapse
MrHyde03 said:
Brilliant. I was sad when I saw he got rid of it. Glad to have you!
And if you can give direction once you receive it I'm eager to learn more, but with limited resources for porting to new devices, its difficult.
Welcome!
Sent from my SCH-I535 using XDA Premium HD app
Click to expand...
Click to collapse
Tab came in downloadimg and flashing your rom now do u have a deodexed build with nothing taken out that i could work with.?
I can get one up for ya in the next few hours
Sent from my SCH-I535 using XDA Premium HD app
Sounds good I could prob do myself just havent looked for the tar yet.. as my cpu fried so im trying to install linux on my old ass desktop til I can replace laptop
Sent from my SCH-I605 using Tapatalk 2
The tar is in the root thread. Latest j1 build stock rooted. Just the system image
Sent from my SCH-I535 using XDA Premium HD app
Thanks
Sent from my SCH-I605 using Tapatalk 2
Hey I've been super busy the past few days and I haven't had a chance to get you a full stock zip yet.. I'll see what I can do tonight man.
MrHyde03 said:
Hey I've been super busy the past few days and I haven't had a chance to get you a full stock zip yet.. I'll see what I can do tonight man.
Click to expand...
Click to collapse
no worries man got the tar from the root page, would u mind if i used your kernel? also do u have a link to the stock shipped kernel? just finished building new computer so its time to rock and roll, i also got a cpl sources keeping an eye out for a jellybean leak
beanstown106 said:
no worries man got the tar from the root page, would u mind if i used your kernel? also do u have a link to the stock shipped kernel? just finished building new computer so its time to rock and roll, i also got a cpl sources keeping an eye out for a jellybean leak
Click to expand...
Click to collapse
Sure, just make sure to mention me :highfive:
And here's a stock kernel. It's a dump from my tab when I first got it rooted on base G3.
boot.img
016662c5295fc290592ff626eb0c6ea2
beanstown106 said:
no worries man got the tar from the root page, would u mind if i used your kernel? also do u have a link to the stock shipped kernel? just finished building new computer so its time to rock and roll, i also got a cpl sources keeping an eye out for a jellybean leak
Click to expand...
Click to collapse
Hey beans.. glad to have ya here! can't wait to see what you can whip up for our tabs! that would be awesome if your sources came through with a leak of the JB
Can anybody else confirm that Netflix is working correctly on my ROM? The app starts up just fine, but when I play a video, all I get is a black screen. Everything else works, just no video.