[TUTORIAL] Unbrick/Firmware restore | Flash GUIDE | ROM List & REVIEWS [09/11/2012]
FORM CONTENT - 1. Installation tutorial 2. Rom list 3. Unbrick and GOING back to original samsung framework/ Stack rom 4. Reviews and Bugs 5. Snapshorts
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. INSTALLING ROMS on Galaxy Ace 5830i updated(28/10/2012) -
[Added after testing them all myself... Feel free to use.:highfive:]
I am not responsible if u dont follow the step and brick your phone...
--------------------------------------------------------------------------------------
# First Backup using CWM
Backup - First thing first, Backing up can be restored later in future in case you want to go back at stack original OS in place of ROM. So, lets begin!
Download cwm ( CWM_temporary without kernel.zip) and place in sd card - (Download)
Switch off the phone.
Press sound up + home and power button together to got to Samsung recovery mode.
Select "apply update from sdcard"
Choose ClockWorkRec5830i.zip. CWM will load.
Go to "backup and restore" and Select Backup.
# A backup will be created under sdcard/clockworkmod/ on your SD CARD. Plz dont format your sdcard. Backup this folder if u can.
--------------------------------------------------------------------------------------
## First ROM flash
Download any one of the Rom from below thread and place in SD card-
[*]Download cwm ( CWM_temporary without kernel.zip) and place in sd card - (Download)
[*]Switch off the phone.
[*]Press sound up + home and power button together to got to Samsung recovery mode.
[*]Select "apply update from sdcard" ----->and choose ClockWorkRec5830i.zip. CWM will load.
[*]To backup got to "backup and restore" -----> Backup.
[*]Select "wipe data / reset"
[*]Select "wipe catch partition".
[*]Now Select restart your phone and Press sound up + home and power button together to got to Samsung recovery mode as you did before.
[*]Again select "apply update from sdcard" and select the rom you want to flash(remember flash via SAMSUNG recovery, cwm may softbrick your phone).
[*]Wait for completion and restart the phone. Phone will work with new rom.
[*]To go back to stack just go to CWM ---> "backup and restore" ----> restore and select restore point.:good:
#For Best Rom see reviews down below
#These roms include features that make them better then stack.
#Will be updated with new roms as the appear on internet. See date and time at top.
HOPE this helps...... Thanks for reading. :laugh:
--------------------------------------------------------------------------------------
### Recovery
There are 3 recoveries available right now Stack samsung recovery, Cyanogen(CWM) recovery (link) and RZ Recovery (link).
ON flashing roms stack recovery will be replaced by one of other two recoveries ie. either Cyanogen or RZ. It is recommended to use cyanogen.
If u some how want to Stack recovery. Just use odin and flash original firmware according to tutorial mentioned below.
--------------------------------------------------------------------------------------
Whats new (04/11/2015) - :fingers-crossed:
[08/11/2012] Thread Updated
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Don't forget to click on THANKS:good: (see left)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Discussion PAGE
ROM LIST (Added after testing)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
# Latest kernels - (LINK)
###NOTE - If your phone automatically reboots while you are using after flashing roms.... Flash to latest kernel and change frequeency / kernel. It will solve your problem.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2. Apps -
Gtalk - (Link)
[*]Gtalk (use if first doesnt work) - (Link)
[*]New Clock - (Link)
[*]FM app - (Link)
[*]PerfMon - (Link)
[*]TouchPal (new keyboard) - (Link)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MAIN thread ----------------- > [TUTORIAL] Installation GUIDE | ROM List | Rom review | Unbrick
[TUTIRIAL] How tooos? { Error Mounting /data! }
Update whole thread this week. Sorry guys i lost my m :highfive:
3. INFO and Q/A -
Q: Ace 5830 i/M/C ?
As per my search almost every thing is same. They just point to shipping continents. i / M / C. The i is made to Spain and countries in Asia. 's M apparently Chile and some Latin American countries. The C is for Brazil. So, U can flash all the roms and use unbrick tutorial on your phone
PDA, Phone and CSC.
PDA == build version of the firmware
Phone == baseband / modem version
CSC == consumer software customization and it is specified to geographical region and carriers. CSC contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS for your service provider. And you can change CSC if you have Multi CSC packages.
####Note –Changing this will factory reset your phone. Do backup before perform this task.
How to change CSC?
Just type *#272*Device IMEI# at Phone dial pad. For IMEI type *#06#.
Select the CSC that you want.
Click Install.
Phone will be rebooted by itself.
####Note –Changing this will factory reset your phone. Do backup before perform this task.
####Note – CSC can sometime be corrupt. It may lead to infinite loop. Reason unkown.
Q: Flashing any firmware to my phone will erase the network lock?
A: NO. The network (or SIM) lock still remain active. By flashing firmware you can't deactivate the lock. It's stored elsewhere.
Q: Flashing an operator specific firmware will restrict my open phone to that operator's network?
A: NO. Your phone still remain open for any SIM. Operator specific builds usually containing "only" bloatwares, wallpapers and/or browser settings, etc...
Q: Is it possible to update the PDA or MODEM only?
A: Yes, You can update any one component independently if you have a good reason for, but remember: recommended to have consistent components
[*]Q: Where is the bootloader tar and pit file when extracted .tar file?
[*]A: those are not used for a Kies like update. You can find .pit in odin attachment above and bootloader in other S5360i firmware bundles like the one mentioned in unbrick tutorial and use if you really need it, but not necessarily needed for flashing
Q: Do I need to tick repartition?
A: NO! Leave all check-boxes as default!
Q: Really??? Do not tick repartition?
A: REALLY, I told You! Leave it unticked!!! ...And leave bootloader empty as well! COPY THAT?!?!?!
Q: Kies says "cannot update this firmware" after flashing rom?
A: No one gives **** what kies says..... Well kies sks. Odin works well. We dont need kies. My guess is due to change in CSC... !
Click to expand...
Click to collapse
3. How to Unbrick Ace 5830i / How to use odin -
Things you need:
Samsung Drivers (link)
Odin with pit.zip (Download)
Firmware package - It is samsung original OS that will be flashed using odin. These firmware are available on sammobile.com (a single file) but they cant be directly flashed using odin. So we have to make them flashable using odin You can get it in two ways:
Firmware repacked by me -
These are the firmware that have been repacked by me and can be directly flashed using odin.
Choose the Country and download the zipped file. Unzip it and watch the unbrick video down below.
If firmware for your country is not available use open australia or go to 2 and learn how i created these repacks.
Open Australia - {S5830IXXLA4_S5830IOXXLA2_ATO Repacked} - [Download] ***PASSWORD = mod2xtreme.com***
India INS - {S5830i_XXLF3_ODDLF1_DDLF1_INDIA_INS} - [Download]
Click to expand...
Click to collapse
Learn and make your own repack -
Providing package for every ace i of different countries is very difficult so you have to do some work.
[*]Go to "Flashing ORIGINAL Samsung Firmware/ Going back to Stack Rom" down below tutorial to learn how to make a Repacked package yourself just like one i created above.
[*]Using tutorial "Flashing ORIGINAL Samsung Firmware/ Going back to Stack Rom", 3 files CSC, modem and PDA will be extraced. [*] An additional file Bootloader (link) is requires with other 3. It has been attached below.
[*]So, Simply first watch the "Flashing ORIGINAL Samsung Firmware/ Going back to Stack Rom" tutorial first, get the files and get to this tutorial after that.
[*][Watch Video Tutorial Down below ]
[*]###Note - Diver problem - (Link)
[*]
[*]To restore Samsung recover as default recover... follow the above unbrick tutorial. What this means is that u suppose your phone is brick and you want to unbrick... So just follow above tutorial and every thing will be normal as it was .
Click to expand...
Click to collapse
3. Flashing ORIGINAL Samsung Firmware/ Going back to Stack Rom -
I was asked by no of users to provide them original frameworks for their ace i.......Doing so for different frameworks id just impossible for me to upload. So for all those who want to go back to the original framework just follow the tutorial.
By flashing an improper firmware pack you may potentially risk the health of your phone. Do it on your own risk only!
I won't take responsibility of any damage done to your phone.
So, lets begin by things you will need:
Check Fus Downloader - (LINK) "not working as of 23/12/2012. Download tar file from sammobile.com. Search ur mobile."
SplitFUS - (LINK) # Download GUI version.
Cygwin - (LINK)
-------------------------------------------------------------------------------
1. Downloading .tar file for your phone
You can download .tar country framework single file by two ways :
From http://www.sammobile.com/ directly. Find your country latest file and download.
By using Check Fus Downloader - Watch video below
2. Extract files from .tar and flash via odin
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Don't forget to click on THANKS:good: (see left)
Discussion PAGE
Review and Bugs
Reserved
Snapshorts
Reserved
Possible duplicate of http://forum.xda-developers.com/showthread.php?t=1817013, although this thread is more detailed.
Also, please don't post direct links. It would be best to direct the readers to the ROM's thread. If the ROM doesn't have one, it shouldn't be listed since it's not tested.
reply
GermainZ said:
Possible duplicate of http://forum.xda-developers.com/showthread.php?t=1817013, although this thread is more detailed.
Also, please don't post direct links. It would be best to direct the readers to the ROM's thread. If the ROM doesn't have one, it shouldn't be listed since it's not tested.
Click to expand...
Click to collapse
I am posting all links after testing them.... i havent mentioned this before but i will in just a second..... and in this i have mentioned complete flash guide which other thread didnt... so i dont believe its duplicate...
in some time i will include videos of all roms installed on my ace......
feetsonfire said:
INSTALLING ROMS on Galaxy Ace 5830i updated(19/8/2012) (01:30 hours) -
1. Download any one of the Rom and place in SD card-
RazoDroiD v1.0 - http://forum.xda-developers.com/showthread.php?t=1816611
GingerCream V1 - http://www.mediafire.com/?cwjc3jv99uhd1ro
GingerCream V2 - http://www.mediafire.com/?nbyiuk9tbymzubf
XperiaTized ROM - http://www.mediafire.com/?9dt83h7fo7ut3q3
Retribution beta 3.5 - http://forum.xda-developers.com/showthread.php?t=1806471
2. Download cwm (ClockWorkRec5830i.zip) and place in sd card - http://forum.xda-developers.com/showthread.php?t=1552792
3. Switch off the phone. Press sound up + home and power button together to got to Samsung recovery mode.
4. Select "apply update from sdcard" ----->and choose ClockWorkRec5830i.zip. CWM will load.
5. To backup got to "backup and restore" -----> Backup.
6. After backup go back and select "wipe data / reset"
7. Select "wipe catch partiton".
8. Now Select restart your phone and Press sound up + home and power button together to got to Samsung recovery mode as you did before.
9. Again select "apply update from sdcard" and select the rom you want to flash.
10. Wait for completion and restart the phone. Phone will work with new rom.
11. To go back to stack just go to CWM ---> "backup and restore" ----> restore and select restore point.:good:
#The best Rom for now are RazoDroiD v1.0 and Retribution beta 3.5 as far performance is concerned not looks.
#There are bugs in all roms.. All are in beginning phase what else u xpect.
#These roms include features that make them better then stack.
#Will be updated with new roms as the appear on internet. See date and time at top.
HOPE this helps...... Thanks for reading. :laugh:
Whats new (19/8/2012) - :fingers-crossed:
XperiaTized ROM
GingerCream V2 ROM
Photos:
XperiaTized ROM -
GingerCream V2[ -
Will be available soon.
Click to expand...
Click to collapse
Hi. Can i know what's your firmware version?? Mine is XXLF3, does XperiaTized work on it?? Thx
Inviato dal mio GT-S5830i con Tapatalk 2
[TUTORIAL] INSTALLATON GUIDE and ROM updates[19/8/2012][Ace 5830i]
Bert98 said:
Hi. Can i know what's your firmware version?? Mine is XXLF3, does XperiaTized work on it?? Thx
Inviato dal mio GT-S5830i con Tapatalk 2
Click to expand...
Click to collapse
Work on all... just try
feetsonfire said:
Work on all... just try
Click to expand...
Click to collapse
And.. Whats not workin?? Sorry for the many questions
Inviato dal mio GT-S5830i con Tapatalk 2
feetsonfire said:
I am posting all links after testing them.... i havent mentioned this before but i will in just a second..... and in this i have mentioned complete flash guide which other thread didnt... so i dont believe its duplicate...
in some time i will include videos of all roms installed on my ace......
Click to expand...
Click to collapse
If a ROM doesn't have its own thread, one can consider it's dead. All updates may or may not be made by the same author -if a company has no building, no address, no phone number, how can you trust it? And if you trust it once, how do you know the next dude who pretends to be from it is genuine?
EDIT: Also refer to post #6. Notice the question? "What's not working?". This is another reason why a ROM must have its thread. If it doesn't, where do all bug reports go? How will it ever get improved? As I've said, it's dead.
EDIT #2: A video? What for? :|
[TUTORIAL] INSTALLATON GUIDE and ROM updates[19/8/2012][Ace 5830i]
Bert98 said:
And.. Whats not workin?? Sorry for the many questions
Inviato dal mio GT-S5830i con Tapatalk 2
Click to expand...
Click to collapse
All roms are working. all are tested. just folllow the steps.... there are some bugs... like XperiaTized ROM have some setting force close issues... all are in testing phase sooo. In a day or 2 i will post videos of all roms.... till then u can try
Ok i'll try if it works
Inviato dal mio GT-S5830i con Tapatalk 2
[TUTORIAL] INSTALLATON GUIDE and ROM updates[19/8/2012][Ace 5830i]
GermainZ said:
If a ROM doesn't have its own thread, one can consider it's dead. All updates may or may not be made by the same author -if a company has no building, no address, no phone number, how can you trust it? And if you trust it once, how do you know the next dude who pretends to be from it is genuine?
EDIT: Also refer to post #6. Notice the question? "What's not working?". This is another reason why a ROM must have its thread. If it doesn't, where do all bug reports go? How will it ever get improved? As I've said, it's dead.
EDIT #2: A video? What for? :|
Click to expand...
Click to collapse
I agree with u... next time i put some link i will try to explain in detail as much i could.. just need some time.
and as for as videos are concerned i said i will put videos of each rom to show that these roms are working on my ace and are tested.
feetsonfire said:
I agree with u... next time i put some link i will try to explain in detail as much i could.. just need some time.
and as for as videos are concerned i said i will put videos of each rom to show that these roms are working on my ace and are tested.
Click to expand...
Click to collapse
Regarding the videos, I don't think it's necessary, but it would be a good addition to get a sneak peak of what's included in the ROM, in action. So go ahead!
[TUTORIAL] INSTALLATON GUIDE and ROM updates[19/8/2012][Ace 5830i]
GermainZ said:
Regarding the videos, I don't think it's necessary, but it would be a good addition to get a sneak peak of what's included in the ROM, in action. So go ahead!
Click to expand...
Click to collapse
thanks for all the suggestions i will today or tomorrow.
Xperiatized rom works very well, love it gery good lookin only, I cant fint the lockscreen in the screenshot
Inviato dal mio GT-S5830i con Tapatalk 2
[TUTORIAL] INSTALLATON GUIDE and ROM updates[19/8/2012][Ace 5830i]
Bert98 said:
Xperiatized rom works very well, love it gery good lookin only, I cant fint the lockscreen in the screenshot
Inviato dal mio GT-S5830i con Tapatalk 2
Click to expand...
Click to collapse
Sir i will add lot of details just give me some time and dont forget to say thanks... i am new so just need a few.... will be very helpful
feetsonfire said:
Sir i will add lot of details just give me some time and dont forget to say thanks... i am new so just need a few.... will be very helpful
Click to expand...
Click to collapse
Ok
Inviato dal mio GT-S5830i con Tapatalk 2
You forgot to add "Wipe Dalvik Cache" before you install the ROM.
Related
Forgive me as I have been dealing with some family matters but here is the guide on how to root/unroot your Samsung Galaxy Tab 10.1 USA WiFi Edition Only!!.
I nor any member of XDA
are responsible if you in any way shape or form
Brick/Break/Crack/Disintegrate your Tablet by using this guide
PLEASE DO NOT come into my thread and bash/flame anyone or anything about this thread. If you have a problem with it please PM me and we can resolve it that way. I don't want my thread cluttered with links to other ROMS/KERNELS/GUIDES/ETC........
I will in the future be making another thread to keep track of all the ROMS and from what variant they originate from
IRC Server = irondust.net
IRC Channel = #galaxy-tab10.1
Webchat link = HERE
Download these necessary tools I have compiled in an all in one zip for you.
DOWNLOAD
Within this download you will see:
ODIN3_v1.85
recovery.tar.md5 (CWM 5.5.0.4)
(Thanks to pershoot for this)
P7510XABKMP_P7510UEKMP_HOME.tar
Samsung_Galaxy_Tab_10.1_root.zip
Click to expand...
Click to collapse
Alright now that we have this downloaded. Extract the zip to your desktop or wherever you want to keep it for safe keeping.
Let's get started
First we need to get to know your buttons on the tab
It can be a little tricky for newcomers when navigating through recovery/download options.
P = POWER, D = VOLUME DOWN, U = VOLUME UP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With the Tablet powered off
Press and hold the Power and Volume Down buttons
You will see this screen below
Release the Power button but still hold the Volume Down button.
The next screen you will see will look like this:
This is your bootloader screen with obiviously TWO options.
Volume Down Button Navigates
Volume Up Button Selects
To Get Into Download Mode Make Sure This Is Highlighted:
To Get Into Recovery Mode Make Sure This Is Highlighted:
This is what Download Mode will look like after you have selected the correct ICON by pressing the Volume Up button.
There are two screens you will see.
The First:
And The Second:
When you are in Download Mode open up ODIN3_v1.85.exe
Plug your tablet into the PC.
For tutorials on ODIN3 I will leave that up to QBKING77 and his AWESOME YOUTUBE VIDEOS
When you see the yellow box lit up
Select the PDA Button
Find the recovery.tar.md5.
This is CLOCKWORKMOD 5.5.0.4
Hit start.
The process will last oh I'd say about................................... 7 seconds
You will see a Green Pass box lit up as well.
The Tablet will reboot on its own.
After the tab has booted up leave your Tablet plugged into the PC.
[EDIT:]
IF FLASHING A CUSTOM ROM IS YOUR GOAL
THEN STOP HERE AND DOWNLOAD THE ROM OF YOUR CHOICE
99.9% OF THE DEVELOPERS PRE-ROOT THEIR MAGNUM-OPUS
PUT IT ON THE ROOT OF YOUR SDCARD/USBSTORAGE
FLASH THAT VIA CWM
IF YOUR GOAL IS TO JUST OBTAIN ROOT ACCESS
FOLLOW THE STEPS BELOW.
Click to expand...
Click to collapse
Put the [COLOR="#00000"]Samsung_Galaxy_Tab_10.1_root.zip[/COLOR] onto the ROOT of your SDCARD/USBSTORAGE.
Next we want to power the tab off.
With the Tablet off boot into Recovery Mode
Now I always Wipe/Data Factory Reset 3X, Wipe Cache 3X and Wipe Dalvik Cache 3X as well.
I do this because I'm anal and it's less chance of things going wrong with the flash so make sure you have everything backed up you need.
However wiping all this from CWM will NOT delete your SDCARD/USBSTORAGE.
After you have wiped everything........
Select Install zip from sdcard
Then choose zip from sdcard
Then select your Samsung_Galaxy_Tab_10.1_root.zip
Then select YES.
Let it do it's thing then select reboot system now.
After it boots up HOORAY!!!!! YOU ARE ROOTED!!! Now you can delete all the system apps your little hearts desire.
Enjoy!!
If you happen to delete something you shouldn't have please follow the steps below
Now for the UNROOTING PROCESS!!
First thing to do is to make a backup of anything on your SDCARD/USBSTORAGE you might need.
Boot your Tablet into Download Mode
Plug your Tablet into your PC and wait for it to connect.
Select the PDA Button and then select the P7510XABKMP_P7510UEKMP_HOME.tar file
Hit Start and that process should take a couple minutes as it will put your Tablet back to the Factory ROM and Recovery and Kernel Images.
After it finishes it should reboot. You are going to want to power it down and boot into
Recovery Mode.
After you are in the factory Recovery Mode as seen above you are going to want to do a Wipe Data/Factory Reset and Wipe Cache Partition 3X's. This will ensure that you are complete stock and it will wipe your SDCARD/USBSTORAGE
Congrats YOU ARE UNROOTED AND NOW ALLOWED TO RECEIVE OTA'S VIA SAMSUNG!!!
UPDATES
This section will be for updates to any part of the original download.
None right now as the original download has been updated with the most recent files.
Current Firmware list by Region for the GT-P7510 Samsung Galaxy Tab 10.1
I will keep on this list as best I can.
This list is courtesy of sammobile.com.
NORTH AMERICA
P7510UEKMP_P7510XABKMP - DECEMBER 2011 - 3.2
EUROPE
P7510XXKL2_P7510XEUKL2 - JANUARY 2012 - 3.2 - OPEN EUROPE
P7510XWKL1_P7510XEFKK1 - DECEMBER 2011 - 3.2 - FRANCE (LA POSTE MOBILE)
P7510XWKL1_P7510OXEKK3 - DECEMBER 2011 - 3.2 - RUSSIA
P7510XWKL1_P7510OXXKJ2 - DECEMBER 2011 - 3.2 - POLAND
P7510XWKL1_P7510OXXKJ2 - DECEMBER 2011 - 3.2 - BALTIC
ASIA
P7510ZSKK1_P7510ZZHKK1 - NOVEMBER 2011 - 3.2 - HONG KONG
P7510ZSKK1_P7510ZZTKK1 - NOVEMBER 2011 - 3.2 - TAIWAN
P7510ZCLA1_P7510OZHLA1 - FEBRUARY 2012 - 3.2 - CHINA
MIDDLE EAST
P7510JPKG5_P7510OJPKG4 - JULY 2011 - 3.1
Great work. If we had a mod here, I'd say this should be stickied, and the old one removed. Thanks!
*Edit: OK, it's been up and stickied for almost a month. It's time to fix the formatting. As of now, I'd say even this guy could do better....
slack04 said:
Great work. If we had a mod here, I'd say this should be stickied, and the old one removed. Thanks!
Click to expand...
Click to collapse
Thanks I appreciate that. I will try to get a hold of one to see if it can be stickied.
Great tutorial, very simple to follow and current.
Thanks for this.
just a tip: you might want to make the images smaller...and space things out a bit...just a bit hard to read but nice job.
Now THIS is how you do a how-to!
First...this is a great tutorial! Question though... is there some other way to root without wiping and losing my current data? Thank you!
Sent from my Nexus S 4G using XDA App
forumsid987 said:
First...this is a great tutorial! Question though... is there some other way to root without wiping and losing my current data? Thank you!
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
You can flash the root zip file without wiping the data and cache. It will work.
OP have written so to make sure no issues arise because of flashing i guess.
ansonantonym said:
You can flash the root zip file without wiping the data and cache. It will work.
OP have written so to make sure no issues arise because of flashing i guess.
Click to expand...
Click to collapse
Correct I never said it was mandatory to wipe I said I do it because it's less chance of things goin wrong and I'm anal like that lol. But no wiping is not mandatory however if you don't wipe and something goes wrong do not ***** about it
Sent from my SPH-D710 using xda premium
Awesome job bro. I'm already rooted but this is a great tutorial.
I do need to update my CWM recovery though.
Sent from my Galaxy Tab 10.1
Modified with Galaxy Task's AWESOMENESS
using XDA premium
does this rooting process work with korean gal tab wifi version?
samoelito said:
does this rooting process work with korean gal tab wifi version?
Click to expand...
Click to collapse
I font know as I dont have a korean version hence why the title says USA wifi only
Sent from my SPH-D710 using xda premium
S0ckM0nk3y said:
I font know as I dont have a korean version hence why the title says USA wifi only
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I eas asking cause the only difference between them is that the korean version has dmb...
samoelito said:
I eas asking cause the only difference between them is that the korean version has dmb...
Click to expand...
Click to collapse
Feel free to try it and report back if you like however I nor any member of ACS is responsible if anything happens to your tablet
Sent from my SPH-D710 using xda premium
great guide...thanks for the work.
Now if there were only some decent roms to flash to the gtab 10.1
How do u know if it's US version or not? i have GT-P7510 and don't know this.
Thanks.
crys18 said:
How do u know if it's US version or not? i have GT-P7510 and don't know this.
Thanks.
Click to expand...
Click to collapse
Please post your firmware version here so that we can help on that.
If it is P7510UExxx then it is US version.
You don't need to flash the ROM to root... the zip I used to root my tab was like 5MB not 300!
dextroamphetamine said:
You don't need to flash the ROM to root... the zip I used to root my tab was like 5MB not 300!
Click to expand...
Click to collapse
Who told you to flash a ROM to root?
Did you even read the OP fully?
The zip in the OP contains all the files required for rooting and unrooting.
dextroamphetamine said:
You don't need to flash the ROM to root... the zip I used to root my tab was like 5MB not 300!
Click to expand...
Click to collapse
There are also links to each individual download
So before you decide come in my thread and ***** about something read the whole OP first.
Nowhere in my guide does it say you have to flash a ROM to root.
So as Centinal Prime said "I'll overlook your condescending tone if you heave the gravity of mine"
READ THE OP FIRST BEFORE YOU COMMENT!!
This is one reason I hate posting guides on here. People don't search or read before they act on things. Remind me never to make a one-click-root for anything.
Sent from my SPH-D710 using xda premium
RATIONALE
I am new to android but not to linux as i have used ubuntu for three years now. the ability to customize ubuntu to my like has been the main reason i have stayed with that OS. so when i purchased my first 'smart' phone in late June, i set out to customize my phone. i discovered the power of custom roms but to my dismay and that of other galaxy y pro duos users, there were no custom roms available (Technoduos and ChobitDigitalis roms are no longer in active development) so i set out to build my own rom. many have asked me to share my work and that is what i am doing today. it may not be as flamboyant and well-adorned as chobitsDigitalis and Technoduos roms but at least it is more functional than the stock samsung rom.
ROM FEATURES:
Pre-rooted using Chainfire supersu method
Fully deodexed
Zipaligned
busybox
init.d scripts support
bash support
14 Lidroid status bar toggles
go Launcher (replaces touchwiz)
MIUI music player (replaces stock music player)
MIUI root file browser
Darktremor app to sd
international CSCs with multilingual support (B55120JVLD1)
sysrw/sysro support via terminal emulator
comes with android terminal emulator
operamini v7 in place of stock v5
build.prob tweaks - video and picture quality, battery tweak, network tweak
init.d scripts including journaling, autozipalign on reboot etc
added icon packs
modded status bar and notification area
[
compatible with Compact kernel by Nitubhaskar
COMPACT KERNEL:
Note the kernel is developed by xda senior member Nitubhaskar who has given me the permission to add his kernel to the rom
the thread for his kernel is here
the kernel is going through continuous development and only links to kernel versions fully tested by me and other GT-5512 users will be added to the downloads section of this thread
if you use this kernel, make sure to thank the Nitubhaskar (hit the thanks botton) on the original kernel thread
FEEDBACK
Lest i forget, i would appreciate it if after downloading this rom or the screenings, you took a little of your time to share your opinions about the rom with us all so that improvements could be made to the rom. in this regard, please post a reply telling me what changes you'd like to see in the rom.
ACKNOWLEDGMENTS
cooking of this rom was made possible as a result of the prior work of the following xda members:
Dsixda - for his android rom cooking kitchen
MIUI developers - for MIUI music player and root file browser
Chainfire - for supersu
jackpal - for android terminal
go developers team - for golaucher ex
opera browser developers for operamini
Millan.sis - for adding lidroid toggles to the systemUI.apk eventhough he was writing his examinations
Lavadepa and Hell_lock and Nitubhaskar were very helpful through their pm timely feedback and advice
Myafik and zykoBR for permanent and temp wifi fix
the many other galaxy y pro duo susers who asked for a custom rom
TESTERS
Thanks to xbox1900, carlovn, exelzor and jigsawyam1 for testing and reporting on this rom. Thanks to everyone else who tested and replied but has not been mentioned here.
Installation instructions
Disclaimer:
you are installing this rom at your own risk. I am not responsible if you soft or hard brick your phone. i make know warranties - expressed or implied, regarding the use and safety of this rom. you are strongly advised to make a nandroid backup of you current rom before proceeding to install this rom.
Latest Stable Release HatyonRom v1.1
Before proceeding to install either the Rom or Compact kernel, make a nandroid backup using clockworkmod from here . this CWM recovery is developed by Millan.SIS so thank him on that thread.
This particular clockworkmod recovery is recommended as it backs up your current kernel (looking for source of this info) as part of nandroid backup
INSTALLING THE ROM
it is recommended that you use clockworkmod recovery to flash this rom
Copy the Rom to the root of your sdcard
Boot into Recovery by pressing volume up, menu and power bottons, release as soon as galaxy y pro duos logo appears
choose install update and flash clockworkmod recovery
Wipe data/factory reset (a MUST)
wipe cache partition (obligatory)
select advance option and wipe dalvic cache (optional but recommended)
unmount and mount the /data and /system partitions (you may format data and system partitions especially if flashing over ChobitDigitalis Rom)
reboot the phone and enter clockworkmod recovery again - credit to exelzor for this step which fixes system partition problems some people may have. Please thank him
choose install zip from from sdcard
select choose zip file option
Select HatyonRomV1.zip and confirm the selection
flash the rom and reboot
Starting for first time will be slow so wait and don't force stop.
Additional instructions:
once installation is complete and you are on your homescreen, type supersu and select the supersu program
when prompted to update the su binary, select continue (no internet required)
start file explorer (not the samsung app called myfiles!!)
hit the menu botton and browse down then enable the root explorer option
give it permanet root permissions when prompted by supersu
press back key and swipe your screen until you get to the screen having 'BROWSE', 'SDCARD' and 'FTP' at the top
beneath 'FTP' is a straight up-pointing arrow, tap on it to get the 'JUMPT TO' menu
scroll down to 'DATA' partion and select it
then select the app directory (folder)
once in app directory you will find operamini and android terminal app
select an app and press enter to install it
if prompted, open settings >> applications and enable installing software from unknown sources
instead connect to android market and install latest operamini and terminal emulator of your choice
FIXING TWO OPERA MINIS ISSUE
if you noticed you have two opera minis installed, uninstall the older version ie com.samsung.operamini-5.1.24639.apk (or a similar name) using titanium backup or link2sd
also remove this file /system/csc/comm_app/Operamini-5.1.24639.apk using root explorer or on terminal
1. type su + enter
2) type 'rm /system/csc/comm_app/Operamini-5.1.24639.apk' and hit enter
INSTALLING VER 1.1
Dowloadad the hatyon rom v1.1 update from the link on download section
place the zip file on root of your sdcard and reboot into recovery
enter clockworkmod recovery and choose to install zip from sdcard
select hatyon1.1.zip and confirm it
once install is complete, reboot your phone.
note it may take a little longer to boot for the first time
the same procedure applies to the other zip files on the download section of this thread
Please read post number 3 (next post) for info on how to fix wifi issue
INSTALLING THE KERNEL
after flashing rom, i recommend you use the phone for at least a minute before flashing kernel
to install the kernel, i recommend you follow the kernel thread link in my first post on this thread.
i will only give the names of the latest stable kernel versions in the download corner of this thread and maybe provide direct download links to the stable kernel versions (if that is ok with Nitubhaskar)
Dowloads corner
ROM VERSIONS
want to download Rom?,
HatyonRomV1 (129mb) Click Here
HatyonRom V1.1 (~22mb) is available here
Screenshots for HatyonRomV1 (715kb) here
Screenies for v1.1 will follow in the morning
SOME STOCK APPS
Ok, here are some stock apps for those who prefer them, just flash the zip
Stock samsung music player available here
Touchwiz launcher (new) is available here
Previous version of framework-res.apk here (for those who don't like the new dark theme
Google Maps 6.8.1 is here (not part of the google apps in the hatyonRom v1.1)
Wifi fix patch (rom ver 1.1 users only). URL REMOVED. see this thread for fix
COMPACT KERNEL VERSIONS
coming soon
Coming soon
Coming soon (depending on user feedback):
themes
custom boot animations
FAQS
Q: is the rom safe?
A: i'd like to say so, but i can't. i have tested it more than 20 times without problems but there is always the chance your phone will get bricked.
Q: will you continue development of the rom?
A: well, rom cooking is a demanding and tedious hobby. if there are many users, i will gladly dedicate my spare time to improving it based on user feed back. else, any modifications will just be for myself.
Q: i don't like go launcher, can you give me Touchwiz launcher (samsung default)?
A: Yes, if at least three people request it
Q: Are there any other launchers apart from go laucher?
A: yes, touchwiz for instance. we also have hololaucher, MIHome launcher- from popular MIUI rom and adw laucher.
Q: can you change this or that for me?
A: well, every rom chef knows that rom cooking is time consuming and one cannot always respond to individual queries. if many as for the same feature, i'd be glad to work on it. i will look into individual requests on the basis of their potential to benefit many others.
well, it doesn't hurt to hit thanks, does it?.
Change log
Version 1.0
hatyon rom version 1.1
Replace go launcher with holo launcher and touchwiz launcher (remove what you don't like)
Remove remove miui music player and let users install their own players
Updated busybox to latest version
Reroot using chainsdd in place of chainfire
New statusbar with animations removed
Updated google apps (gmail, Gtalk, play store, contacts, calender, maps etc)
Updated zipalign bin
Updated anroid terminal app to latest version
Remove app2sd scripts (i recommend you install link2sd)
updated opera mini browser to latest version
introduced custom dark (nearly black) theme (works but i need input to make it better)
Great.. finally released... you can add my kernel to it if you want... i will release better version tomorrow may be. So you can add that as rom not uploaded yet..
Sent from my GT-S6102
the captain will be upset when he saw this thread. you'd better ask him to move it to general section. any non-device specified development stuff should be placed on general section. that's why HCFroyd's rom stayed there.
kurotsugi said:
the captain will be upset when he saw this thread. you'd better ask him to move it to general section. any non-device specified development stuff should be placed on general section. that's why HCFroyd's rom stayed there.
Click to expand...
Click to collapse
Oh.. i thought pro and pro duos are included in duos section.. there are already 2-3 threads other than duos related in dev section i think..
Sent from my GT-S6102
nitubhaskar said:
Great.. finally released... you can add my kernel to it if you want... i will release better version tomorrow may be. So you can add that as rom not uploaded yet..
Sent from my GT-S6102
Click to expand...
Click to collapse
sorry, i uploaded rom about 15hours ago. since the network is bad in my area, i opted to make sure the upload was successful before i post about my rom. i hadn't inserted the link earlier on but i edited the downloads section and inserted the link few minutes after posting.
Note: i experimented with kernels at the beginning of my cooking. i unpacked my stock kernel and rooted it using rom kitchen and added the boot.img to my rom. it worked alright but when you you restore clockworkmod nandroid backup this time, it will say restore is succesfful but you get boot loop which i believe are due to modified kernel since i could make as many CWM nandroid backup and restores as i wished.
with the modded kernel, only backups made after using the modded kernel worked.
if user response to the rom is positive, i will dedicate one of my reserved posts to your kernel. i will give a solution to how to overcome problem of not being able to restore old nandroid backups after flashing custom kernel. i will also describe how to add kernel to rom before flashing. so go on and develop your kernel. my screenshot will make it clear i am using your kernel!
the captain is friendly with us. it seems that he intentionally let them slipped. another mod mostly will move them directly on general section (lol)
anyway, since it against "the rule" IMO we should ask his opinion about it. personally I think these thread should be here but our captain might have different opinion about it. don't worry, our captain won't delete this thread or close it. you can peacefully discuss this matter with him and got the best resolution for all of us.
wowwwww finally a ROM!!! downloading it...tomorrow feedback!!
If u need help I too tried to cook a rom for pro duos months ago but I stopped developping for work problems..
Good work bro. Put screenies
Sent from my GT-S6102 using XDA
hell_lock said:
Good work bro. Put screenies
Sent from my GT-S6102 using XDA
Click to expand...
Click to collapse
i've added links to screenshots on download corner. its just a small file under 1mb. I know couple of guys downloaded this rom, i need feedback to continue
kurotsugi said:
the captain is friendly with us. it seems that he intentionally let them slipped. another mod mostly will move them directly on general section (lol)
anyway, since it against "the rule" IMO we should ask his opinion about it. personally I think these thread should be here but our captain might have different opinion about it. don't worry, our captain won't delete this thread or close it. you can peacefully discuss this matter with him and got the best resolution for all of us.
Click to expand...
Click to collapse
The-captain said this to my PM about creating dev threads related to pro versions of galaxy y under y duos dev section..
The-Captain said:
Hi, the Pros can be in the Duos Section.
Sent from my XT862 using Tapatalk 2
Click to expand...
Click to collapse
So we are in clear...
hit thanks button! If above post helps you..
Sent from my GT-S6102
nitubhaskar said:
The-captain said this to my PM about creating dev threads related to pro versions of galaxy y under y duos dev section..
So we are in clear...
hit thanks button! If above post helps you..
Sent from my GT-S6102
Click to expand...
Click to collapse
sighing .....
thanks, Nitubhaskar for asking the-Captain
Nice
arbayong said:
sorry, i uploaded rom about 15hours ago. since the network is bad in my area, i opted to make sure the upload was successful before i post about my rom. i hadn't inserted the link earlier on but i edited the downloads section and inserted the link few minutes after posting.
Note: i experimented with kernels at the beginning of my cooking. i unpacked my stock kernel and rooted it using rom kitchen and added the boot.img to my rom. it worked alright but when you you restore clockworkmod nandroid backup this time, it will say restore is succesfful but you get boot loop which i believe are due to modified kernel since i could make as many CWM nandroid backup and restores as i wished.
with the modded kernel, only backups made after using the modded kernel worked.
if user response to the rom is positive, i will dedicate one of my reserved posts to your kernel. i will give a solution to how to overcome problem of not being able to restore old nandroid backups after flashing custom kernel. i will also describe how to add kernel to rom before flashing. so go on and develop your kernel. my screenshot will make it clear i am using your kernel!
Click to expand...
Click to collapse
Finally u achieved n uploaded dudeeeeeee:good:Best of luck:good:
Hit thanks button if i helped
Just a word
I want to confirm to any B5512 user, arbayong rom + nitubhaskar kernel is the best available software update they can get.
Am using both now, and starting to love my phone (I think no one was happy with samsung soft!)
@ arbayong!
I prefer not to have flamboyant and well-adorned rom to account of stability and functionality!
Thanks to both members for making B5512 a value! :laugh:
Hey guys,
We are trying to flash this ROM but isn't going so well.
We haven't tried flashing the kernel is this needed to make it boot?
After flashing it says flashing is succesfull but when booting it doesn 't go beyond the Samsung B5512 screen (not the boot animation)
Here is some info about the phone:
PDA:B5512XXLF1
PHONE:B5512XXLF1
CSC:B5512XXLF1
Kernel version 2.6.35.7 [email protected]#22
Hope you have some advice (we have followed the guide in the first posted thoroughly)
Thanks for making this great project happen (same gos for making the kernel, wich is allso a much appriciated. Especially the OC and governers and 4ext)
Carlovn said:
Hey guys,
We are trying to flash this ROM but isn't going so well.
We haven't tried flashing the kernel is this needed to make it boot?
After flashing it says flashing is succesfull but when booting it doesn 't go beyond the Samsung B5512 screen (not the boot animation)
Here is some info about the phone:
PDA:B5512XXLF1
PHONE:B5512XXLF1
CSC:B5512XXLF1
Kernel version 2.6.35.7 [email protected]#22
Hope you have some advice (we have followed the guide in the first posted thoroughly)
Thanks for making this great project happen (same gos for making the kernel, wich is allso a much appriciated. Especially the OC and governers and 4ext)
Click to expand...
Click to collapse
so if you have done according to instruction.. it should have worked.. so.. questions..
where did you get your cwm version? whats the file name of it?
you must do this..
Wipe data/factory reset
wipe cache partition
if you did the dalvik cache clean.. try without doing it..
both data and system partition must be mounted.. just make sure of it in advanced mounting option.. it should show unmount /data unmount /system options..
then how much time did you wait after reboot.. its reecommended to wait atleast 10 mins.. to make sure you didnt abort the bootup process in a hurry..
and a tip: if it did got stuck.. you can use 3 combo buttons any time while using your device to get into recovery.. while booting or using phone or whenever stuck.. so no need to remove battery and all that.. just hold it until your device reboots and u see samsung logo then release..
for the kernel part.. it is not necessary to have that with this rom.. or any other rom in future for your device for that matter.. but.. by having that you can have more features that also goes with the rom.. you can test the new kernels i release in other thread.. but please read my posts before doing so.. because i want testers to have some knowledge of how to recover their device if it soft bricks.. usually it wont.. my odin related 3rd post or 4th one in my thread explains that..
Hi guys,
Just want to inform that I will not continue to support this tool anymore since I just bought a new phone due to the requirement of my work.
Thank you all for using and supporting me in making this app.
Devilsking
(9th Feb 2015)
-----------------------------------------------------
WARNING: BESURE YOU ARE UNLOCKED BOOTLOADER BEFORE FLASHING/DOWNGRADING FIRMWARE!
It's nearly 11 months since the last update v1.2. Now I will introduce the new version of Myth Tools with a big improvement.
Thanks to all your comments which helps me to complete the features of Myth Tools. All feedbacks are always welcome.
Please read instruction carefully before using. Thank you.
BR,
DK
----------------------------------------------------------
If you stucks after flashing back to stock rom from custom rom, maybe this method should help you to fix it:
Credit for skeevydude
The fix is simple. Boot into Philz, format the internal sd, set the internal sd mount point to /data/media, reboot, format it again, and done. I'm assuming you don't keep anything important on the internal sd...
The issue is multiuser support in 4.2+ roms screws with our 4.1 stock roms. 4.2+ uses /data/media/0 for the main user's "internal sd" then /data/media/1 then /data/media/2 and so on and so forth for each additional user. You don't have to format, but if you were on Carbon, only changed the mount point, flashed to stock, then later down the line you install CM or Slim, your crap from Carbon will still be there under /data/media/0 and could cause issues with the newer rom.
EDIT:
A format of /data might fix this too, but you'll still have to check and/or change the mount point. The internal sd is stored on /data.
Click to expand...
Click to collapse
-----------------------------------------------------------
This tool is created by The Myth Team for Motorola Atrix HD
All comments to help improving tools are always welcome!
-----------------------------------------------------------
MAIN PARTS:
1. Installer ADB/FASTBOOT/APKTOOL for AHD (Use for parts below and further modding)
2. Flashing Tools for stock firmwares (compatible with ICS/JB of AT&T, BELL and Mexico AHD;
include options for installing CWM recovery, no needs to care about editing xml any more, just put firmware into our tools and it will do for you)
3. Flashing Recovery
4. Rooting Tools (Motochopper - By Dan Rosenberg; it's combined here to bring the convinience for users after
installing stock firmwares)
5. Unlocking Bootloader Tools (Motopocalypse - By Dan Rosenberg; it's combined here with the same target as
rooting tools but it's necesary for users who want to flash other carrier's firmwares on their AHD)
6. Dowload Motorola USB Driver (Lastest driver)
7. Lockscreen Mod
8. Mod for ADBD Insecure
EXTRA PARTS:
4 Quick reboot Options
------------------------------------------------------------
HOW TO USE:
1. For the installer, just select option and it will open a new window, select Install button and it will install adb/fastboot/apktool to your windows. If your windows dont allow to install (due to UAC control), u can select installer in /tools folder and run it under administration mode. With this installer, u dont need sdk-platform anymore to use adb or fastboot. Just need to have JDK and it will run normally.
2. To flash stock firmware, you only have to download stock firmware (*.zip file) and put it in 'firmware' folder then run our tools. Follow its instructions and options to finish the flash process. Dont need to edit xml files and No more worries about failure with RSDLite. We have tested all firmwares of AHD (ICS 4.0.4, JB 4.1.1, 4.1.2 of Bell, AT&T, Mexico Retail) with our tools and they worked.
3. Option allows users to install cwm recovery or custom recovery (it's up to users). To flash custom recovery, you can place recovery image (*.img) to 'recovery folder and run the tools.
4,5. This is popular and famous tools by Dan Rosenberg. I think I dont need to explain again
6. This is link for Driver on Motorola site. Just in case you miss it or need to install again.
7. It provides a various theme for lockscreen of stock firmware by modding framework
8. It will mod automatically the boot.img to allow the true adb root with adb command (eg. "adb remount" to full read-write system..). It mainly is useful for stock firmware while custom rom always has.
------------------------------------------------------------
DOWNLOAD
- V1.3: OneDrive (Updated link 17th June 2018)
- V1.2: Dev-host or Google driver
- V1.1: Dev-host or Google Driver
- V1.0: Dev-host or google driver (select File > Dowload)
If you satisfy with our tool, plz consider to invite me a cup of coffee
------------------------------------------------------------
Credit:
- The Myth Team's members
- Thank to Djrbliss, skeevydude, leanix, osm0sis, chainfaire, PhilZ: I used some things from your files/information to make this tools
If I miss sb, feel free to tell me
------------------------------------------------------------
SCREENSHOTS & CHANGE LOG:
V1.3
- Optimize tools' code
- Improve apktool/adb/fastboot installer
- Improve recovery flashing & add Philz Touch to option.
- Added reboot option after flashing
- Show progress of flashing firmware
- Add feature to auto-enable ADBD Insecure (Auto mode for ATT 4.1.1 & BELL 4.1.2, Manually mod option)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V1.2
- Add lockscreen effect mod tool (Screenshot of its result: see here)
+ 3 preload mods: original, samsung ripple and honeycomb effect
+ allows users to mod it themselves: custom option.
V1.1
- Add Launcher
- Add Users' agreement
- Add Flash Recovery Option which allows users to flash cwm recovery or custom recovery
by putting recovery image in tools (stock recovery,...etc) then it will be flashed to phone.
- Add Quick Reboot Options
- Optimize tools' sources
V1.0
- First release
- Tested flashing all firmwares of AHD
Very nice, I was hoping someone would create a nice tool like this.
Sent from my MB886 using xda app-developers app
------------------------------------------------------------
Change log:
1.0
- First release
- Tested flashing all firmwares of AHD
Great job but will downgrade to stock ICS work with this? Curious
thank you so much...
big help if somebody will link a couple of working ics and jb rom zip format....
pleaaaaaseeeeeee....
NYSEAN1 said:
Great job but will downgrade to stock ICS work with this? Curious
Click to expand...
Click to collapse
Yes. Tested. U only need unlocked bootloader first.
Sent from my MB886 using xda app-developers app
is this for windows only?
HELP!
MY PHONE is now stocked at warning boot loader unlcked.
it does not boot anymore after trying to go back to ICS with this utility...
any advise?????
thanx
htchd2fix said:
HELP!
MY PHONE is now stocked at warning boot loader unlcked.
it does not boot anymore after trying to go back to ICS with this utility...
any advise?????
thanx
Click to expand...
Click to collapse
Which ICS did u flash? Bell or ATT? Do u notice any error during flash process ?, if yes, plz post screenshot here or type it here.
You can try to go back to JB while I figure out what happened to you. Plz provide information asap then I can help u.
Edit 1: I have tried to flash Bell ICS and it booted normally. Now I will try ATT ICS again =.='
Here is screenshot of my phone on Bell ICS
Edit 2: Flashed ATT ICS again and it also booted. I think you should try to flash firmware again or download firmware again then flash. If you still meet problem after trying again, plz let me know. I'm happy to help you
Here is screenshot of my phone on ATT ICS:
Which version of cwm does it flash?
Sent from my MB886 using xda premium
bankanidhi said:
Which version of cwm does it flash?
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
v6.0.2.8
Swiftb12305 said:
is this for windows only?
Click to expand...
Click to collapse
Yep. Window Only. I dont use Linux or Mac =.='
devilsking said:
v6.0.2.8
Click to expand...
Click to collapse
Thanks. I also wanted to know if it is the official recovery. Please let me know who compiled the save. Thanks. This device is getting better and better. Thanks a ton fur this tool.
Sent from my MB886 using xda premium
bankanidhi said:
Thanks. I also wanted to know if it is the official recovery. Please let me know who compiled the save. Thanks. This device is getting better and better. Thanks a ton fur this tool.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I got it from skeevydude's topic. So maybe it's not official one
devilsking said:
I got it from skeevydude's topic. So maybe it's not official one
Click to expand...
Click to collapse
Oh OK. I already have that one. But yes the tool looks great. You are awesome.
Sent from my MB886 using xda premium
devilsking said:
Which ICS did u flash? Bell or ATT? Do u notice any error during flash process ?, if yes, plz post screenshot here or type it here.
You can try to go back to JB while I figure out what happened to you. Plz provide information asap then I can help u.
Edit 1: I have tried to flash Bell ICS and it booted normally. Now I will try ATT ICS again =.='
Edit 2: Flashed ATT ICS again and it also booted. I think you should try to flash firmware again or download firmware again then flash. If you still meet problem after trying again, plz let me know. I'm happy to help you
Here is screenshot of my phone on ATT ICS:
Click to expand...
Click to collapse
can you post the zip you are using?
thanx
htchd2fix said:
can you post the zip you are using?
thanx
Click to expand...
Click to collapse
I downloaded from here: http://sbf.droid-developers.org/dinara/list.php
Great job bro. All we need it was an overall tool like this one
Sent from my MB886 using xda premium
devilsking said:
I downloaded from here: http://sbf.droid-developers.org/dinara/list.php
Click to expand...
Click to collapse
thanx
htchd2fix said:
thanx
Click to expand...
Click to collapse
U're welcome. Let me know if it works for u. Thanks.
THIS IS A MEGA THREAD
PLEASE READ CAREFULLY BEFORE DOING ANYTHING
HELLO XDA'S THIS THREAD IS FOR ONLY AND ONLY FOR L7 P705/P700
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MANY HAVE POSTED ROOTING ,INSTALLING CWM AND COSTUME ROMS FOR LG OPTIMUS L7 AND I'M HERE JUST TO SHARE THE POST
IT WOULD BE GREAT IF EVERYTHING CAN BE ACCESED IN ONE PLACE
SOME OF THE SECTIONS ARE HIDED FOR A CLEANED THREAD. DO CLICK SHOW FOR THE CONTENT
L7 ROOTING
As rooting is the most essential part for a development of a android phone Lets get start with it
FOR ROOTING YOU CAN USE
1) IF YOU ARE USING ICS VERSION
DOWNLOAD THIS FILE View attachment 2329480
EXTRACT IT TO ANY FOLDER
AND RUN 'RUN ME FILE'
FOLLOW THE STEPS AS IN THE COMMAND BOX
2) IF YOU ARE USING JB VERSION
USE FRAMAROOT apk FOR ROOTING FROM THISLINK
3) THERE IS ANOTHER WAY FOR ROOTING L7 POSTED BY AXD96
CYDIAIMPACTOR
Code:
Need
-PC
-PHONE
-driver adb (find it on lg websites in your phone pages)
-this file CYDIAIMPACTOR
LINK DOWNLOAD:
MAC OS
WINDOWS
LINUX 32BIT
LINUX 64BIT
Guide
0. your phone driver must be installed on your pc!
1. download this zip files and extract it on your desktop
2. enable usb debug on your phone(setting/developper/debug usb)
3. connect your phone to your pc
4. open IMPACTOR.exe (you extracted it on your desktop)
5. press start
FINISH!!!! your phone got ROOT ACCESS
now you can reboot your phone and install from play store(for future updates) SUPERSU, i have got no luck with SUPERUSER.
FOR FURTHER ACCESE ABOUT THIS ROOTING METHODE VISIT THIS THREAD here
SO I GUESS ROOTING IS DONE ,bit easy rite? lets go forword
Click to expand...
Click to collapse
INSTALLING CWM(CLOCKWORK MOD)
DOWNLOAD THIS FILE View attachment L7CWM.rar
1. Place the CWM Package you downloaded to your Desktop.
2. Extract files from the package over to your C:// (root destination)
3. Turn ON the USB debugging function on your device by heading to Menu>>Settings>>Developer options>>USB debugging.
4. Once it’s been enabled, connect your device to your PC using the USB cable.
5. Double-click on the file named Flash_Bootloader.bat that you extracted earlier to your Desktop.
6. It’ll unlock the bootloader of your device.
7. Your device should reboot and once it boots up, double-click the Flash_Recovery.bat file.
8. Follow the on-screen instructions to flash recovery on your device.
9. Once the recovery’s been flashed, reboot your device.
Click to expand...
Click to collapse
TWRP RECOVERY
TWRP Recovery v2.6.3.0
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
You can download it here
DOWNLOAD:
TWRP
Instalation:
Flash via CWM.
for further details please kindly visit this orginal thread here
Click to expand...
Click to collapse
INSTALLING A CUSTOM ROM
Download the ROM image, which is usually a zip archive, and copy it into the root folder of your SD card.
Important: you do not unzip the .zip file - just copy it as is.
You can do it by
attaching the phone with a USB cable and selecting the option of mounting the SD card to be used as a drive on the computer
or
unmounting the SD card, physically taking it out of the phone, and inserting into your own card reader
or
downloading the ROM straight from the phone browser
Once you've copied the ROM image, you can proceed to flashing it
Flash It
The process of installing new firmware or low-level system software in general is called flashing.
We will be flashing the new custom ROM over the stock one that came with your phone.
And Reboot to recovery...
For booting to CWM recovery /TWRP recovery
Go to advance boot option in developer option and enable it
and long press power menu
for manual booting switch off the phone and
Press both volume + ,volume - and the home button together with the power button
release all buttons expect power button when we get a vibration and
release the power button after the lg logo has appered
this will let you get in the recovery menu
back up existing ROM (which you should do unless you've already backed up manually) from back up and restore
then
wipe data and wipe cache, which you should only do if you want to do a clean install, i.e. when upgrading from the stock ROM. Note: this does not wipe your SD card data - it only wipes the phone's internal memory.
and wipe dalvic cache too in advance option
and after that click in install from sd card
The ROM you downloaded should show up in the list. If it doesn't, make sure you've put it into the root folder of the SD card.
and click INSTALL
Click to expand...
Click to collapse
UPGRADING LG OPTIMUS L7 TO JB
With guide how to install official lg firmware (updating from ics to jb)
Guide with a KDZ_Updater :
Code:
First Step:
• IT WORKS FOR ALL LG L7 Firmware!
• Install this [ATTACH]2340152._xfImport[/ATTACH]
• Open B2CApp(LG Updater) and Install our USB Driver for our Phone going on: Install USB Driver, Search for P700 and Doubleclick it. The USB Driver downloading..and install Step by Step! Phone is not Connected!
• Download KDZ Flasher >> [URL]http://www.google.de/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&sqi=2&ved=0CDcQFjAB&url=http%3A%2F%2Fforum.xda-developers.com%2Fattachment.php%3Fattachmentid%3D868756%26d%3D1327321413&ei=xessUbHVIaKL4ATc7ICgBg&usg=AFQjCNHqI9N1AAs6SxWvnydbHaJ8z-GNCg&bvm=bv.42965579,d.bGE&cad=rja[/URL] > [URL]http://lg-phone-firmware.com/index.php?id_mod=13[/URL] "KDZ_FW_UPD.exe" as Administrator <
• Set Type on "3GQCT" and PhoneMode on "EMERGENCY"
• Click on the Folder Icon and Search for your Downloaded KDZ File
Step Three:
• Click on "Launch Software Update"
• Waiting for Phone..The Phone come in few seconds in the Emergency mode!! Yellow screen with Black Text..
• Is the Software upgrade successfull, Reboot the Phone in the System
• Make a Factory Reset! In Settings > Backup and reboot > Reset Memory (ALL FILES LOSE!)
• LG L7 Reboot's now and you can use the Android System! Finish!
Guide with CWM (Custom Recovery, Clockworkmod) :
Code:
First Step:
• Make sure ROOT!
• Make sure USB Driver are Installed!
• Download: Show Attachment (L7CWM)
• Make sure USB-Debugging is on!
• Extract the Downloaded File's
Step Two:
• Make a sure System is Started!
• Connect the Phone in USB Storage Mode
• Wait until the phone has been detected
• Doubleclick on the File in the folder "Flash_Bootloader.bat"
• Wait .. is perhaps the phone reboot's
Step Three:
• Connect the Phone in USB Storage Mode
• Doubleclick on the File in the folder "Flash_Recovery.bat"
• Wait .. is perhaps the phone reboot's
• Waiting for System and Connect the Phone in USB Storage Mode
• Download this: LG L7 Deodexted Keyboard >> [URL]http://d-h.st/XIl[/URL] > [URL]http://d-h.st/j3J[/URL] > [URL]http://d-h.st/MZx[/URL] Wipe Dalvik Cache
• Install zip from SD Card > First install: Stock_v10k_Rooted.zip > Yes, Next the WIFI Fix, and then Keyboard.
• Wipe data / factory Reset, Wipe Cache, ADVANCED > Wipe Dalvik Cache
• Reboot and System show up!
Click to expand...
Click to collapse
CHANGE BASEBAND OF L7
If you have android 4.1.2 and install CM10 based on android 4.0.3 and do not have the range and the operator
This baseband install the ICS
If you have android 4.0.3 and install rom based on android 4.1.2
we do not have the range and the operator to install the baseband of JB
HENCE TO SOLVE THESE ISSUES
we have to install the specific baseband according to the rom
you can find details about baseband changes in this thread
here
Click to expand...
Click to collapse
ROMS AND KERNALS
THESE ARE JUST LINKS TO THE DEVELOPMENT THREAD OF THE RESPECTIVE ROM
I JUST MADE IT EASY TO SEARCH FOR ROMS
[ROM] CyanogenMod 11.0 CR3PT
[ROM] CARBON ROM 4.4
[ROM] CRYSTAL PA 4.4
[ROM] AOKP 4.4
[ROM] CyanogenMod 11.0 TUDORSIRB
[ROM] SLIMKAT
[ROM] VANIR 4.4
[ROM] KITKAT PRIME
[ROM]CRYSTAL CM 11
[ROM] LG STOCK 4.0.3
[ROM] CYAN FOX
[ROM] Jelly bean extreme 4.1.2
[KERNEL] PHENOM 4.1.X
[CWM 6.0.3.2] CWM
[KERNEL]STOCK P700 4.1 OC KERNEL
[KERNEL]STOCK P705 4.1 KERNEL
[ROM] Note III SlimRoM [4.3]
[ROM] [4.1.2] Xperia Z SlimRoM
[ROM] CyanogenMod 10
[ROM] CM10.1 - Avatar ROM extreme
[ROM] CM10 galaxy S4 / update to CM10.1 galaxy S4 beta 2
[ROM KDZ] L7 - V10K_00 Stock
[ROM] MIUI v5 (3.7.19)
[ROM] IOS7 Rom
[ROM][4.3.1] Vanir weeklies
[ROM][4.3.1] Unofficial CyanogenMod 10.2 CR3PT
[ROM][4.3.1] Unofficial CyanogenMod 10.2 TUDORSIRB
[ROM][4.3] Unofficial Paranoid Android 3.99
[ROM][4.2.2] Unofficial CyanogenMod 10.1
[ROM] AOKP 4.1.2
[ROM][JB 4.3] P.A.C True All in 1 ROM[BETA 2] Unofficial
[ROM] JellyBeer v4.33 [BeerGang] [Hybrid] Unofficial
[ROM]Slim Bean 4.1.2 - Build3: Underdog
[ROM]P.A.C-Man 19.3.0 | Jellybean 4.1.2 | BETA 2
Click to expand...
Click to collapse
UNTUTU BENCHMARKING RESULTS
AnTuTu Benchmark is a comprehensive Android Benchmarking application. It includes "Memory Performance", "CPU Integer Performance", "CPU Floating Point Performance", "2D 3D Graphics Performance", "SD card read-write speed", "Database IO" performance testing.
Here is a Thread for untutu benchmark results for L7
you can visit this thread for scores and you can submit your score too
here
Click to expand...
Click to collapse
REMOVING NFC IN P705
Flash this zip file for removing the NFC feature from your phone
Universal NFC Deströyer 1.7
for more details visit this thread
OR
manually you can delete these files for removing NFC
Code:
system/app/Nfc.apk
system/app/Nfc.odex
system/app/Tag.apk - on Jelly Bean based Roms
system/app/Tag.odex
system/priv-app/Tag.apk
system/priv-app/Tag.odex
system/framework/com.android.nfc_extras.jar
system/etc/nfcee_access.xml
system/etc/permissions/android.hardware.nfc.xml
com.android.nfc_extras.xml
com.cyanogenmod.nfc.enhanced.xml
vendor/firmware/libpn544_fw.so
system/lib/hw/nfc.default.so
system/lib/libnfc.so+libnfc_ini.so+libnfc_ndef.so
THANKS
#pkatsaras
#szymel0
#AXD96
@vaikz
#kevios12
#tudorsirb
@-CALIBAN666-
YOUTUBE VIDEOS
HAPPY USING LG OPTIMUS L7 P700/P705
I WILL BE UPDATING THIS THREAD AS NEW ROMS ENTER
AND PLEASE REMIND ME IF I HAVE LEFT SOME ROM :silly::silly::silly:
HAPPY USING LG OPTIMUS L7
:laugh::laugh::laugh:
FAQ AND QUESTIONS
Code:
What is the root?
In the most literal sense, root is a part of a plant that typically lies below the surface of the soil. Rooting a smartphone is completely different: by rooting users can gain privileged access to Android’s subsystem (or root access). This is useful for accessing data, making backups, or changing the "base" of your smartphone, such as the Android (ROM) interface.
How does rooting work?
By rooting an Android device, you basically install a new kernel. A kernel is the conductor that will tell the software how to use the hardware portion of your device. Very simply put, the new kernel allows for more access and more customizable access to your devices hardware.
What is a Custom Rom?
A ROM is an Android-based system. This is actually the system that you use. TouchWiz is the rom developed by Samsung, the HTC Sense, etc ... We talk about custom rom (Custom) when the developer of the ROM is an independent group or individual. For example, CyanogenMod is a custom ROM for example, based on Android "pure".In detail, this is a set of consistent data with a chip ROM (read only memory), present on your smartphone.
What is CWM ?
CWM or Clock Work Mod is a custom recovery for android which repalaces the orginal recovery given by manufacture,It has more options and support than the stock one
What Does Custom roms do?
Custom roms has no boltwares and other apps which increases the RAM usage ,thus its lag free and smooth
Click to expand...
Click to collapse
Awesome tanks
Enviado desde mi XT531 usando Tapatalk 2
flopezm said:
Awesome tanks
Enviado desde mi XT531 usando Tapatalk 2
Click to expand...
Click to collapse
thankz bro
cool it really works
hi, please add my tutorial to your guide
ArjunrambZ said:
HELLO XDA'S THIS THREAD IS FOR ONLY AND ONLY FOR L7
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2448085
add to your guide, this is an easy way to root your phone :good::good:
AXD96 said:
http://forum.xda-developers.com/showthread.php?t=2448085
add to your guide, this is an easy way to root your phone :good::good:
Click to expand...
Click to collapse
ok will add ,wait
Can you add also how to update official ROM, downgrade from v20 to v10, flashing baseband, reverting from custom to stock & vice versa.
What else, hmmm I'll post if I can think or remember.
There's a lot of guide scattered, hope this will be put in one place. So that a noob or new user ask common question will be point or be directed to this post.
And if ever this one will be updated and most of the howto's and common questions and guides then it would be nice this will be stickied. :beer:
Sent from My LGP705G using Tapatalk
Please please please post how to root LG optimus l7 2 dual p715.....can't find anywhere and easy method.
Sent from my LG-P715 using XDA Premium 4 mobile app
Jassi Saini said:
Please please please post how to root LG optimus l7 2 dual p715.....can't find anywhere and easy method.
Sent from my LG-P715 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?p=41570088
Sent from My LGP705G using Tapatalk
vaikz said:
Can you add also how to update official ROM, downgrade from v20 to v10, flashing baseband, reverting from custom to stock & vice versa.
What else, hmmm I'll post if I can think or remember.
There's a lot of guide scattered, hope this will be put in one place. So that a noob or new user ask common question will be point or be directed to this post.
And if ever this one will be updated and most of the howto's and common questions and guides then it would be nice this will be stickied. :beer:
Sent from My LGP705G using Tapatalk
Click to expand...
Click to collapse
ok i will try to update this but i have to find the post ,help me find those :laugh:
vaikz said:
Can you add also how to update official ROM, downgrade from v20 to v10, flashing baseband, reverting from custom to stock & vice versa.
What else, hmmm I'll post if I can think or remember.
There's a lot of guide scattered, hope this will be put in one place. So that a noob or new user ask common question will be point or be directed to this post.
And if ever this one will be updated and most of the howto's and common questions and guides then it would be nice this will be stickied. :beer:
Sent from My LGP705G using Tapatalk
Click to expand...
Click to collapse
all done bro,,,remind me if any thing missing
http://forum.xda-developers.com/showthread.php?t=1664322
Lukijs said:
http://forum.xda-developers.com/showthread.php?t=1664322
Click to expand...
Click to collapse
what u want me to add from this post?
Hey @op, kindly add twrp for l7. Its very good, its what im using right now.
http://forum.xda-developers.com/showthread.php?p=46313382
Sent from My LGP705G using Tapatalk
vaikz said:
Hey @op, kindly add twrp for l7. Its very good, its what im using right now.
http://forum.xda-developers.com/showthread.php?p=46313382
Sent from My LGP705G using Tapatalk
Click to expand...
Click to collapse
yahh,,i forgot about it.. will add now :laugh:
How can I unlock bootloader?
How can I unlock bootloader after impactor root-method?
osx_cm7 said:
How can I unlock bootloader after impactor root-method?
Click to expand...
Click to collapse
It's on the first post, installing cwm. It will also install the unlock bootloader. Read the post.
Sent from My LGP705G using Tapatalk
vaikz said:
It's on the first post, installing cwm. It will also install the unlock bootloader. Read the post.
Sent from My LGP705G using Tapatalk
Click to expand...
Click to collapse
thanks for supporting the thread :laugh:
osx_cm7 said:
How can I unlock bootloader after impactor root-method?
Click to expand...
Click to collapse
impactor methode is just explained greatly in this thread do check it out http://cleanimport.xda/index.php?threads/2448085/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Fixed 3G Problem
APN Auto (Smart , Beeline, Cellcard,Metfone,Qb)
Removed T-Roaming
Fixed network Mode to WCDA and GSM Auto, WCDMA , GSM only
Clean Korean Apps
Fixed Call Locator from Location
Added Khmer Font and Keyboard
Added S5 TouchHome
Added Them Chooser (LG, SKY,SONY,Sense 5)
Add S5 SystemUI
Mod Icon S5
Added Note 4 and Note edge Wallpaper
Radio Work 100%
Mode Camera
Setting Mode S5
Convert Model to GT-I9300
Baseband Converted to GT-I9300
Removed Korean Dial Pad
Calender Khmer Default
Khmer Default Language
Auto Reset after flashed
odin flash able file
Base on Android 4.3
Base official Build for stable and daily use
Note : Please Back Up all important data before flashing . It will remove all ur data
Bugs:
U tell me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Section:
Google Drive Link : Download
Mirror Link : any one please help upload new link
Note :
Can flash only Galaxy S3 SHW-M440S 3G Korean Phone only !!!!!!!!!!!!! for who hate korean version !!!!!!!!!!!!!
Instruction to flash this ROM :
Instructions
Extract (unzip) the firmware file
Download Odin v3.10.6
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Can Flash Any Version
Flash ready It Will go Recovery auto ( Don't Forget Factory Reset , And Wipe Cache)
Waiting a few minute for Booting
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help support me by Click Thank and Donate on the future !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Screen Shoot Here :Click to See
Rule :
Please Keep My Credit any Copy Post with Permission !!!!!!!!!!!!!
Read more :
I would like to explain all about my work !!
1. This Rom is make on Android 4.3 edit from Stock Samsung Official for the stable one and daily use (I confuse to put on my post with 4.4.X)
2. Warning it is for SHW-M440S only Kernel not comparable with I9300
3. Odin package i build for Normal User they easy to understand to flash with odin
4. If every one want zip flashable i will make it ( i need free time to do it )
5. The most purpose in this rom is Convert from Koreaan version to international Version because Korean Version is very worst to use it come up with a lot of useless app , Korean language everywhere , system too big size with useless file . No Network mode to switch able , No radio , ****ing Slow , Bad UI , etc ..................................
thank everyoone hope u understand it !!!!!!!!!!!!!!!!!!!
XDA:DevDB Information
SHW-M440S Projeck by KU, ROM for the Samsung Galaxy S III I9300
Contributors
khmerupdate
Source Code: http://www.khmerupdaterom.com/2014/12/galaxy-s3-shw-m4440s-s5-mod-note-4-look.html
ROM OS Version: 4.3.x Jellybean
ROM Firmware Required: Can flash it with any version
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-21
Created 2015-06-06
Last Updated 2015-06-07
Screenshots please ?
Some screenshots would be nice! =D
for screenshots , click on the SCREENSHOTS tab above in op.
Is there a way to Get a flashable zip for the Recovery?
Andi17 said:
Is there a way to Get a flashable zip for the Recovery?
Click to expand...
Click to collapse
I flashed this with Odin, ths is noti FAIL, what happening?
naeroki_bi said:
I flashed this with Odin, ths is noti FAIL, what happening?
Click to expand...
Click to collapse
I prefer to Flash a zip File with the Recovery like all other Roms.
What? Flash this via twrp? Right?
But when i dowloaded this rom, this is 7z package, i extract this package then i see a tar package, when i extract this rom, i receive some file *.img as: system.img,data.img,...
Sent from my GT-I9300 using XDA Free mobile app
naeroki_bi said:
What? Flash this via twrp? Right?
But when i dowloaded this rom, this is 7z package, i extract this package then i see a tar package, when i extract this rom, i receive some file *.img as: system.img,data.img,...
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
u dont have to extract the zip file just move it on phone install and done..
xmixmaster said:
u dont have to extract the zip file just move it on phone install and done..
Click to expand...
Click to collapse
But in the Installation instructions is written to install with odin
1. Flash With Odin 3.0.9 up
2. Can Flash Any Version
3. Flash ready It Will go Recovery auto ( Don't Forget Factory Reset , And Wipe Cache)
4. Waiting a few minute for Booting
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help support me by Click Thank and Donate on the future !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Screen Shoot Here : Click
In this case He have to znzip until the Tar
Costin Ramon said:
Screenshots please ?
Click to expand...
Click to collapse
please click on screen shoot at top
hey sir i need know this rom for GT-I9300 or for S3 SHW-M440S ???
and how flash it ?
CWM flashable zip please
GT-I9300 cihazımdan Tapatalk kullanılarak gönderildi
Hi guys,
I made a fashable zip of this rom and im uploading it right now.. approximately in 1 hour it will be finished, then ill share it
@khmerupdate, i need to know if this rom is a 4.4.4 or 4.3 build? in the screenshots it shows 4.3, but in the OP it is stated as 4.4.x?
and what kernel do you use for this rom? i included the kernel that was present in the odin flashable, but im not so sure about the kernel, i dont want anyone to have a bricekd phone because of me, although it is the kernel you provide in your odin flashable package..
im asking these to be sure the flashable zip is safe to flash for the i9300 users, i do not have an i9300 so i cant do tests to make sure, as long as i dont get answers to these questions i cannot share the zip file i uploaded.
according to your answers, im gonna make changes in the flashable zip i made or not, safety goes first !
fake !
This ROM 4.3 ! 4.4.4 not ! Do not download not safe
But this rom is 7z package. Is twpr recovery can flash 7z package?
Sent from my GT-I9300 using XDA Free mobile app
MaHo_66 said:
@khmerupdate, i need to know if this rom is a 4.4.4 or 4.3 build? in the screenshots it shows 4.3, but in the OP it is stated as 4.4.x?
and what kernel do you use for this rom? i included the kernel that was present in the odin flashable, but im not so sure about the kernel, i dont want anyone to have a bricekd phone because of me, although it is the kernel you provide in your odin flashable package..
im asking these to be sure the flashable zip is safe to flash for the i9300 users, i do not have an i9300 so i cant do tests to make sure, as long as i dont get answers to these questions i cannot share the zip file i uploaded.
according to your answers, im gonna make changes in the flashable zip i made or not, safety goes first !
Click to expand...
Click to collapse
Thank for u for question !!!!!!!!!!!!!!!!!!!!!
I would like to explain all about my work !!
1. This Rom is make on Android 4.3 edit from Stock Samsung Official for the stable one and daily use (I confuse to put on my post with 4.4.X)
2. Warning it is for SHW-M440S only Kernel not comparable with I9300
3. Odin package i build for Normal User they easy to understand to flash with odin
4. If every one want zip flashable i will make it ( i need free time to do it )
5. The most purpose in this rom is Convert from Koreaan version to international Version because Korean Version is very worst to use it come up with a lot of useless app , Korean language everywhere , system too big size with useless file . No Network mode to switch able , No radio , ****ing Slow , Bad UI , etc ..................................
thank everyoone hope u understand it !!!!!!!!!!!!!!!!!!!
khmerupdate said:
Features:
Fixed 3G Problem
APN Auto (Smart , Beeline, Cellcard,Metfone,Qb)
Removed T-Roaming
Fixed network Mode to WCDA and GSM Auto, WCDMA , GSM only
Clean Korean Apps
Fixed Call Locator from Location
Added Khmer Font and Keyboard
Added S5 TouchHome
Added Them Chooser (LG, SKY,SONY,Sense 5)
Add S5 SystemUI
Mod Icon S5
Added Note 4 and Note edge Wallpaper
Radio Work 100%
Mode Camera
Setting Mode S5
Convert Model to GT-I9300
Baseband Converted to GT-I9300
Removed Korean Dial Pad
Calender Khmer Default
Khmer Default Language
Auto Reset after flashed
odin flash able file
Base on Android 4.3
Base official Build for stable and daily use
Note : Please Back Up all important data before flashing . It will remove all ur data
Bugs:
U tell me !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Section:
Google Drive Link : Download
Mirror Link : any one please help upload new link
Note :
Can flash only Galaxy S3 SHW-M440S 3G Korean Phone only !!!!!!!!!!!!! for who hate korean version !!!!!!!!!!!!!
Instruction to flash this ROM :
Instructions
Extract (unzip) the firmware file
Download Odin v3.10.6
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Can Flash Any Version
Flash ready It Will go Recovery auto ( Don't Forget Factory Reset , And Wipe Cache)
Waiting a few minute for Booting
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Help support me by Click Thank and Donate on the future !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Screen Shoot Here :Click to See
Rule :
Please Keep My Credit any Copy Post with Permission !!!!!!!!!!!!!
Read more :
I would like to explain all about my work !!
1. This Rom is make on Android 4.3 edit from Stock Samsung Official for the stable one and daily use (I confuse to put on my post with 4.4.X)
2. Warning it is for SHW-M440S only Kernel not comparable with I9300
3. Odin package i build for Normal User they easy to understand to flash with odin
4. If every one want zip flashable i will make it ( i need free time to do it )
5. The most purpose in this rom is Convert from Koreaan version to international Version because Korean Version is very worst to use it come up with a lot of useless app , Korean language everywhere , system too big size with useless file . No Network mode to switch able , No radio , ****ing Slow , Bad UI , etc ..................................
thank everyoone hope u understand it !!!!!!!!!!!!!!!!!!!
XDA:DevDB Information
SHW-M440S Projeck by KU, ROM for the Samsung Galaxy S III I9300
Contributors
khmerupdate
Source Code: http://www.khmerupdaterom.com/2014/12/galaxy-s3-shw-m4440s-s5-mod-note-4-look.html
ROM OS Version: 4.3.x Jellybean
ROM Firmware Required: Can flash it with any version
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-21
Created 2015-06-06
Last Updated 2015-06-07
Click to expand...
Click to collapse
All member please read on Discussion again
Here is the flashable zip of this rom for the i9300, GT-I9300-4.4.4-Note4-V1-KU.zip
Only change i made is that i changed the kernel to boeffla 5.8 stable for JB i9300 and also added the boeffla config app, nothing else that i changed in the rom.
- no modem is included, so you will keep your modem
- and FYI this is a odexed rom
Rom is now safe to flash for i9300 users, just dont forget to make a nandroid backup of your current system and do a wipe data/factory reset in recovery before flashing if you decide to try it.
in any case im not responsible for anything bad that might happen!!!