Samsung Galaxy S Plus is stuck on recovery! - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!

Kramtoske said:
Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!
Click to expand...
Click to collapse
here is the fix http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330 . Good luck !! :good:

Kramtoske said:
Hello, i own Samsung Galaxy S Plus and i was trying to flash Cyanogenmod 9 Beta 1 on CWM-based recovery v5.5.0.4 and it ended up as when i reload the phone after the Samsung logo's the recovery opens up again, no booting animation.
What can i do? How to fix it?! IS IT POSSIBLE?!!
Please help!
Click to expand...
Click to collapse
you may need a i9001 6.0 CWM recovery or Touch CWM recovery for performance, download link on My Android Collections link, below

Amazing! It works!
Running ICS on a full charge, i love you mate

Laurentyu1995 said:
here is the fix http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330 . Good luck !! :good:
Click to expand...
Click to collapse
Thankss uu i have this problem too thanks so much .. and thanks for [email protected]

bleros said:
Thankss uu i have this problem too thanks so much .. and thanks for [email protected]
Click to expand...
Click to collapse
can someone please advice me i have also stuck in recovery loop i download odin i download the files and then following the steps but odin cannot find the phone when i push the start button i get please connect phones
can u please advice.thanks

@ all: if you have this problem have a look at this thread: http://forum.xda-developers.com/showthread.php?t=2053350

dem012 said:
can someone please advice me i have also stuck in recovery loop i download odin i download the files and then following the steps but odin cannot find the phone when i push the start button i get please connect phones
can u please advice.thanks
Click to expand...
Click to collapse
You must install adb driver first i u dont have them then put in download mode is easy

bleros said:
You must install adb driver first i u dont have them then put in download mode is easy
Click to expand...
Click to collapse
I forgot to turn on usb debugging,will that be affected when using odin? And how long the duration when using odin?

Related

[Help] Stuck on boot

Hello, I have a samsung I9001 But now i have installed recovery clockworkmod thats was going then i wanted to install
cyangonemod 9 and then its go wrong when i boot it its keeps on booting i have a backup but thats fails to
I can go into recovey mode and download mode but thats was it
i tried to install a stock rom with odin but odin keeps saying setup connection
anyone who can help me
You can from your computer download cm9 and gapps...put them into a sd card...and put your sd card in your phone...go into recovery..fullwipe...cache dalvik...and then istall rom and after gapps...i do this way
sent from a phone surely better than iphone...
---------- Post added at 07:32 PM ---------- Previous post was at 07:31 PM ----------
Sorry i forgot to told you...before the rom download twrp recovery 2.2.1 and install...after that install the rom
sent from a phone surely better than iphone...
jordy55 said:
Hello, I have a samsung I9001 But now i have installed recovery clockworkmod thats was going then i wanted to install
cyangonemod 9 and then its go wrong when i boot it its keeps on booting i have a backup but thats fails to
I can go into recovey mode and download mode but thats was it
i tried to install a stock rom with odin but odin keeps saying setup connection
anyone who can help me
Click to expand...
Click to collapse
if it's boot in recovery mode( every time you start it go in recovery mode) you should flash the bootloader. at cwm recovery section from i9001 wiki page you can find.
edit: this is http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
Thank you both You make my day really better thanks thanks thanks !
jordy55 said:
Thank you both You make my day really better thanks thanks thanks !
Click to expand...
Click to collapse
if so then push the thanks button :good:
jordy55 said:
Thank you both You make my day really better thanks thanks thanks !
Click to expand...
Click to collapse
don't forget to hit thanks
Haha done, Its working fine Android 4.0 is new for me looks great
jordy55 said:
Haha done, Its working fine Android 4.0 is new for me looks great
Click to expand...
Click to collapse
enjoy it

Help ! Installation of flash cyanogenmod failed

i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Which phone do you have? Can you go into recovery/download mode?
my phone is samsung galaxy s plus and yes i CAN go into recovery mode
Donovan662 said:
Which phone do you have? Can you go into recovery/download mode?
Click to expand...
Click to collapse
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Habescha said:
yes both...can you help me? i mean...whats wrong? i used odin, recoveryclock 6.0.1.2, cm10, gapps...can i recover my phone in any way to the old 2.3.6 version or?
Click to expand...
Click to collapse
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
thx i will try it but can you tell me where i went wrong? is it because i didnt delete kies on my windowspc? or anything special bec i would like to have ics on my phone...do you recommend cm9 instead of 10 because it didnt worked on my sgsplus or do you recommend me to try again...carefully of course ?
amir karimi2 said:
see you this
http://forum.xda-developers.com/showthread.php?t=1922505:good:
Click to expand...
Click to collapse
how can i find out my right firmware for my phone? or is it not important which i download?
Habescha said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me? i tried to flash again but it wouldnt help...i tried cm10...is my phone useless know?
Click to expand...
Click to collapse
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
thx though zou helped me a lot...now cm9 is working fine on my sgs plus...does cm10 works too im wondering bec i tried and it stocked after rebooting it
educk said:
First of all, chill everything is gonna be fine...
Second, please tell us which version of CM10 did you installed and how did you installed it (did you wipe data/cache/dalvik).
Third, if you have a boot loop into recovery check this: http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330
If your phone doesn't have a bootloop into recovery try a full wipe again and flash CM10 again.
If you want to go back to stock to 2.3.6 go to http://www.sammobile.com/firmware/?page=3 scroll down, choose your phone model/OS/country than use this tutorial: http://forum.xda-developers.com/showthread.php?t=1922505:good:.
If I helped, please hit the thanks button.
Click to expand...
Click to collapse
no i did all the steps wiping and deleting the data im pretty sure...cm9 is as i already said working fine....do you recommend to try to flash cm10 again on my phone bec im afraid to brick my phone...used the one of the xdaforum 2012-11-22: CM10 alpha4
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
educk said:
yes. wipe everything and try to flash cm10 again.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Habescha said:
THX IM RUNNING CYANOGENMOD by ivendor alpha 5 know ITS JUST GREAT !!!!! i tried other cm10s but they didnt worked thank you guys for youre help !
Click to expand...
Click to collapse
I'm glad you managed to make it work.
educk said:
I'm glad you managed to make it work.
Click to expand...
Click to collapse
THX but ONE QUESTION?! does cm10 alpha 5 works without any problems? i mean can you go into youre mobile internet when youre outside? bec my phone with alpha 5 cm10 by ivendor does not work....:s i decided to flash the older alpha 4 until i found out the reason why it doesnt function...any guesses? =)
OK FOUND THE FIX ZIP ALREADY O XDA DDDDDD
ONE LAST THING : the vibration of the back and menu button is for me to hard....i found out that on my sgs plzs cm10 alpha 5 in settings-advanced there is NO VIBRATION setting in there, on my friends one there were several more options to choose!
is it maybe bec i flashed my phone with an older cwmrecovery?i think its 5.0 blabla...do i have to flash it again with the newer once 6.blabla?
thank you GUYS for youre quick help
help.....my xperia miro stuck at black screen after sony logo came out
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
AndrewLian said:
i followed all instructions of the cda developers site ...after i rebooted my phone the logo appears but after it its just a black screen....the phone doesnt start? can anybody help me?now my phone cannot go into cwm mode and stuck at sony logo....please help me!!:crying::crying::crying::crying:
Click to expand...
Click to collapse
Do you have a Sony? Post then better in the threads for your phone.
This is section for Samsung Galaxy S
tetakpatalked from N7100
cm 10.2.1.3 installation failed
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
chinarredij said:
I was installing cm 10.2.1.3 but it failed.i am having micromax a113.which recovery should i use?and it is necessary to unlick bootloader while flashing custom rom?
Click to expand...
Click to collapse
You have posted in wrong thread here.
tetakpatalked from 1+One

Help! Mini 2 Stuck in recovery loop.

Hello!
I wanted to flash CM 10.1 on a Galaxy Mini 2, after factory reset,wipe cache and dalvik cache the device just got stuck on recovery.
I tried to flash the CM 10.1 but there is a problem with it, it says "Installation aborted".
Please help me!
Wassupdog said:
Hello!
I wanted to flash CM 10.1 on a Galaxy Mini 2, after factory reset,wipe cache and dalvik cache the device just got stuck on recovery.
I tried to flash the CM 10.1 but there is a problem with it, it says "Installation aborted".
Please help me!
Click to expand...
Click to collapse
Flash with Odin the latest CWM Recovery and flash the rom again!
djfnz said:
Flash with Odin the latest CWM Recovery and flash the rom again!
Click to expand...
Click to collapse
Thanks for the answer!
Can you give me please a download link to the latest CWM please?
Wassupdog said:
Thanks for the answer!
Can you give me please a download link to the latest CWM please?
Click to expand...
Click to collapse
I use this CWM version (not latest but working fine) http://goo.im/devs/thewhisp/jena-recovery/cwm-6.0.3.3-jena.tar.md5
djfnz said:
I use this CWM version (not latest but working fine) http://goo.im/devs/thewhisp/jena-recovery/cwm-6.0.3.3-jena.tar.md5
Click to expand...
Click to collapse
Ty!
djfnz said:
I use this CWM version (not latest but working fine) http://goo.im/devs/thewhisp/jena-recovery/cwm-6.0.3.3-jena.tar.md5
Click to expand...
Click to collapse
The Odin got stuck on SetupConnection (The device is in recovery because I can't exit from it).
What should I do?
Wassupdog said:
The Odin got stuck on SetupConnection (The device is in recovery because I can't exit from it).
What should I do?
Click to expand...
Click to collapse
Open task manager on pc and kill Kyes tasks first before you connect your phone to pc and open odin! (maybe this is your problem with odin flash)
For the recovery stuk put out the batery hold power for 30 sec and pyt it back on and then try go to download mod (it woks for me)
Lol another thread about bootlooop? XD
Enviado desde mi GT-S6500D usando Tapatalk 2
larissamafia said:
Open task manager on pc and kill Kyes tasks first before you connect your phone to pc and open odin! (maybe this is your problem with odin flash)
For the recovery stuk put out the batery hold power for 30 sec and pyt it back on and then try go to download mod (it woks for me)
Click to expand...
Click to collapse
Thank you!
I will try both .
Guys I have same problem and the cwm links do not work for me help!!!

Galaxy S GT-I9000 not starting after using Oding to root

Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
http://theunlockr.com/2012/10/22/how-to-root-the-samsung-galaxy-s-i9000-cf-kernel-method/
Click to expand...
Click to collapse
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Hello!
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Don't worry, it is just a digestion problem (bootloop). CF-root doesn't work with every firmware. If yours wasn't compatible, bootloop is normal reaction. Check my last thread and there you can find step-by-by step guide how to unbrick it.
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Here you go!!!
Don't worry. It is just a little thing.
Read my post here in the below given link. The solution is given in easiest steps.
forum.xda-developers.com/showthread.php?p=47034690#post47034690
Thank you so much guys it's working now, (even though I put the original one)!
I'll try to root it again asap!
tetakpatak said:
If yours wasn't compatible, bootloop is normal reaction.
Click to expand...
Click to collapse
How do I know if it's compatible or not? What should I check?
_Flasher_ said:
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
Click to expand...
Click to collapse
Sorry for the late reply: anyway no, the only thing I could do was watch the phone reboot and reboot and reboot and reboot and, finally, reboot
Thank you again!
BeNdErR said:
Thank you so much guys it's working now.
How do I know if it's compatible or not? What should I check?
Click to expand...
Click to collapse
Great, mate- I'm glad it works again
CF-Root is made AMAIK for Gingerbread ROMs only, and if you have Froyo it is enough to flash SpeedMod root kernel that already features CWM recovery, Busybox and SU. You should always ready very carefully the first posts of the files you flash, so you will void many potential problems.
If you did it after my unbrick guide thread, backup your IMEI No as soon as you root your phone (described how to)
Just click "thanks" button beyond posts which were useful for you, it is our way to express it on this forum (and many us here are visiting the forum to help each other)
GT-I9000 blackout, can only go to download mode after Odin
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
jaysonuao said:
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
Click to expand...
Click to collapse
Which Odin version did you use and what exacactly did you try to flash? Which system / Android version is installed om the phone?
tetakpatalked from N7100

[Recovery]TWRP for Galaxy ON7 [SM-G600FY][Unofficial]

Introduction:
Team Win Recovery Project, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
About This Recovery:
First Of All, im not the one who syncyed this from source, All credits go to our Recognized Contributor @ashyx as he build this recovery for Galaxy ON7 for the request. So please thank him for this Awesome work
Warning
Either me or @ashyx is NOT responsible for anything happen to your mobile. Flash at your own risk..
ONLY TESTED ON SM-G600FY (6.0.1 MM)
Download
Flashing Steps:
1. boot up odin
2. load the reocvery in AP section
3. Uncheck auto reboot(Must)
4. Flash
5. pull out batterty
6. Boot to recovery Manually (Volume up+ Home+ Power)
Rooting Galaxy ON7(SM-G600FY)
1. Download SuperSU
2. Flash in TWRP
3. Reboot
Both TWRP and Root is verified by me personally and works fine.. Backup ur current rom INCASE
Reserved
Reserved 1
Is this for 5.1.1 or 6.0.1? I tried on 6.0.1 and the phone is stuck on the first Samsung logo screen. it does not boot into the custom recovery.
EDIT
I tried on 5.1.1 too, but same result. Stuck on the first screen and does not boot into TWRP
Title says 900 - content says 600
Is this one is for Samsung On 7 ? I tried ODIN download mode - TWRP recovery image. after pull out battery and tried login with recovery mode - got boot loader image and error - Set Warranty Bit : recovery and nothing happens after that.
When I reboot, stock recovery is overwritting TWRP. Please help.
Also... include a not responsible note.. NOT is missing.
Thanks.
prasanve said:
Is this one is for Samsung On 7 ? I tried ODIN download mode - TWRP recovery image. after pull out battery and tried login with recovery mode - got boot loader image and error - Set Warranty Bit : recovery and nothing happens after that.
When I reboot, stock recovery is overwritting TWRP. Please help.
Also... include a not responsible note.. NOT is missing.
Thanks.
Click to expand...
Click to collapse
Yes, that is the exact same problem I have too.
Any ideas please? Thanks!
TealSkit said:
Is this for 5.1.1 or 6.0.1? I tried on 6.0.1 and the phone is stuck on the first Samsung logo screen. it does not boot into the custom recovery.
EDIT
I tried on 5.1.1 too, but same result. Stuck on the first screen and does not boot into TWRP
Click to expand...
Click to collapse
Yes i have checked it on ON7 G600FY running MM(6.0.1), dont try it on LP, flash one more time and make sure u have auto reboot unchecked, so that u need to enter recovery manually..
prasanve said:
Is this one is for Samsung On 7 ? I tried ODIN download mode - TWRP recovery image. after pull out battery and tried login with recovery mode - got boot loader image and error - Set Warranty Bit : recovery and nothing happens after that.
When I reboot, stock recovery is overwritting TWRP. Please help.
Also... include a not responsible note.. NOT is missing.
Thanks.
Click to expand...
Click to collapse
TealSkit said:
Yes, that is the exact same problem I have too.
Any ideas please? Thanks!
Click to expand...
Click to collapse
My bad i have mistyped the title, and yes its for Galaxy ON7 (SM-G600FY) running marshmallow(6.0.1), repeat steps one more time and check manually reboot to recovery..
Wait for one day. I will reupload the twrp once..
amtra said:
Yes i have checked it on ON7 G600FY running MM(6.0.1), dont try it on LP, flash one more time and make sure u have auto reboot unchecked, so that u need to enter recovery manually..
Click to expand...
Click to collapse
Is there a way to directly reboot in recovery mode from download mode...? When I reboot from download mode by pressing Volume UP + Volume Down + Power it starts in system boot which overwrites the twrp recovery by system default recovery.
http://forum.xda-developers.com/android/development/twrp-3-0-2-1-samsung-galaxy-on7-sm-t3488220
every one please go to this thread
http://forum.xda-developers.com/android/development/twrp-3-0-2-1-samsung-galaxy-on7-sm-t3488220
every one please go to this thread
thank you, thank you. worked perfectly. now i can finally get rid of all that samsung bloatware:good:
TealSkit said:
thank you, thank you. worked perfectly. now i can finally get rid of all that samsung bloatware:good:
Click to expand...
Click to collapse
Make full nandroid backup before u root, and play with the files
TealSkit said:
thank you, thank you. worked perfectly. now i can finally get rid of all that samsung bloatware:good:
Click to expand...
Click to collapse
And I thank you for, at least, not clicking the thanks button of the OP. [emoji53]
ashyx said:
And I thank you for, at least, not clicking the thanks button of the OP. [emoji53]
Click to expand...
Click to collapse
Terribly sorry. I thought I had. My bad. I've hit the Thanks button now :good:
hey..
not working on my on7 G600F device.. stuck at samsung logo then nothing..
G600FXXU1APG1
Anyone could save us !
We need G600F root guys!
PLEASE.
Help me please
I need Twrp and root for my galaxy on7 g6100
It's new pocket livred un 3rd trimestre of 2016
robertdzdz said:
I need Twrp and root for my galaxy on7 g6100
It's new pocket livred un 3rd trimestre of 2016
Click to expand...
Click to collapse
Help me please
I need Twrp for my galaxy on7 G610L
It's new pocket livred un 3rd trimestre of 2016

Categories

Resources