I just got a pair of Jabra BT8010 for my Tilt and was looking forward to enjoying them but they won't play music for me. The Jabra BT8010 has a regular BT headset that works like any other BT set but it also has a cable you can attach and make it into a stereo headset with another ear bud. You press a mode button to turn on the stereo/music function.
However, the music function of the headset is on and I can control the media player but either the sound plays for about 10 seconds and goes out or no sound comes through the headset at all. Jabra & ATT were no help. HTC claimed that phone doesn't work with this BT set because the device must have a dedicated BT music headset. That sounded shady to me so I decided to check several forums and noticed some people use the same model. I've contacted these people but no reply yet. Anyone have advice on what to do for a fix?
I had the same problem at first. Using the menu on the headset itself, I was able to reset it to the factory settings, repair it with my phone, and it worked just fine after that.
Hope that helps you out.
I tried paring my BH-503 headset from nokia and it seems i cant make good use of the call button, forward and reverse button, and play and pause button.
Do you have solutions to this?
Just tested it on my xperia x1 and all seemed to work fine.
Maybe try a hard reset and pair the device again?
Good luck
i just noticed that bluetooth controls on my headset didn't work on the Media Panel. Tsk..
Anyway... For owners of BH-503 (or maybe other bluetooth stereo headsets) try using Windows Media so that you could use the controls.
I hope this one helps..
Hi.
I've a problem with my "old" Diamond^^
When I connect a bluetooth headset to my Diamond and want to listen to my music it works.. but when I use the hardware-keys on my headset (play/pause, skip) it quits the bluetooth connection after 10 to 15 seconds and plays the music loud with the build in speaker. The keys still work but I can't get any music output from the headset. I have to reconnect it to use it again..
When I just use the software buttons (TF3D or WMP) to navigate through my music there is no problem neither.
With my Diamond2 there is no problem. I can listen, and skip and do whatever I want and it stays connected.
Anyone knows how to solve this issue?
[edit]
tryed different roms! Gen.Y, AZTOR, BsB's...
No one has any idea?
[edit] With my Bluetooth Car radio everything works fine. But it doesn't have any button to interact with the phone but the answer call button.. So why did my Stereo headset work with the Diamond1 for month and now acts like this?
Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.
Hi,
I have a set of Sony earphones/headset that I used on my iPhone. It has a button and mic like the stock iPhone ones.
I have a couple of questions:
1) I have tried a 'droid' app that enable music controls from the headset button, it didn't work.
Is there anyway to disable the default option that 'doubleclick' redials the last number? (Some other music apps include this feature, but I have found them all to have problems. bTunes was close, but it crashes with 12g of music.)
2) The iPhone heaset mic works on my HTC, the Sony one doesn't. The Sony one is fine on the iPone, but the mic doesn't work on the HTC. (Although the headset icon appears)
Any help much appreciated.
gdgt profile Chipdeep