Database Develop

** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly **

Fixing so-called "Bricks"/Odin Errors
This guide is open to contribution/editing/correcting
I DO REALIZE THAT MOST OF THESE LINKS ARE BROKEN, PLEASE SCAN THE THREAD TO FIND UPDATED LINK. I'M NOT VERY ACTIVE ANYMORE, SORRY!
-----------------------------------------------------------------------------------------------------
BOOT CYCLE
This is where you get the annoying Samsung Screen/Galaxy S screen.
DOWNLOAD REQUIRED (CREDITS TO Woodrube):
JFD ODIN Images from Samsung (PDA)
Stock JFD Image
512 PIT File (PIT Extract first!)
Stock 512Pit
ODIN
Odin3_v1.0.exe.zip
Click to expand...
Click to collapse
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
-----------------------------------------------------------------------------------------------------
NO-BOOT PHONES
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "BOOT CYCLE" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "BOOT CYCLE" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, except for the downloading parts, obviously.
-Phone not responsive?
*Try "NO-BOOT PHONES"section of this guide
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
-Cannot get into download mode using the method I listed? Use the method(s) below:
Soldering Method
More methods coming soon
-----------------------------------------------------------------------------------------------------
I know how much of a pain posting in the Q/A section can be and the wait time is pretty bad, so if you need help regarding UNBRICKING and ONLY UNBRICKING feel free to post in here.
Hope you enjoy, this is my first guide, please don't flame. Any comments or suggestion is suggest, or if you have your own method I'll also post it
POST YOUR RESULTS!
-Steven
The only forums this guide should be posted on is XDA, DZ, and PHANDROID under the username DRAIKZ and EXPLOSIVE. If it helped you, feel free to donate a coke or two!
​

Nice Guide! One thing I noticed is that the color is overdone and instead of helping with reading it has the opposite effect. Made everything look semi-messy and crowded.

good guide..
one question though, the PIT file is the one for the Tmobile JFD file. would that affect any unlocked vibrant? I mean, would it lock the phone back to Tmo??
thanks for sharing,
Cheers

I thought there's no fix to a phone which is really BRICKED? oh well, everything's possible at this time.

Please be more descriptive in your terms of "brick(ed)". The term bricked is meant that your phone isb rendered COMPLETELY & UTTERLY USELESS, FOREVER! The phone will never get used again... Hence.... Brick!?
I like the guide just think it would better off with more descriptive details of what caused the phone to boot loop or not boot.

Ok let me fix up the terms when I get home. I don't think you can ever make the vibrant utterly useless haha. Android phones are nearly impossible to brick
Sent from my SGH-T959 using XDA App

angel6677 said:
good guide..
one question though, the PIT file is the one for the Tmobile JFD file. would that affect any unlocked vibrant? I mean, would it lock the phone back to Tmo??
thanks for sharing,
Cheers
Click to expand...
Click to collapse
I'm not too sure as I do not have an unlocked phone myself and was wrong the same thing a few days back.
Sent from my SGH-T959 using XDA App

Is there a fix for the brick where the phone does not turn on at all amd does not even respond to the usb in the phone like for example plugging in the phone a wall charger and not even a grey battery or a little circle symbol?
Sent from my SGH-T959 using XDA App

Yeah, read the info under the "HARD BRICK" section Good luck, it should work as that also happened to me, I had it fixed with the method I listed up there.
If you need help or some questions answered during the process, I'll be online for another hour or so, or just PM me

OP. Can you add the soldering option as well? Would be good to have it in here. Added this Guide to the WIKI.

swehes said:
OP. Can you add the soldering option as well? Would be good to have it in here. Added this Guide to the WIKI.
Click to expand...
Click to collapse
Will do and thanks for the add
Now off to find the soldering guide x]

what do you do when you use odin and it STILL boots back to the samsung screen??

If the black screen doesn't change after like 15 minutes, then just do the whole process all over again. It could just mean a bad install
Even programs messes up sometimes
Goodluck!

Remember, please post your results so I can see how I can improve this guide!

So, i think i have actualy made a brick. I was running macnut r12/a13 kernal for about a week and had some issues with the overclock so i figured i would just flash aver itself as that has fixed a few issues in the past. booted into clockwork, flashed the rom, no worries. Hit reboot system and it hung at the vibrant/i9k boot screen. At this point i was still not worried. Here is where it gets fun. My Phone will now not boot into recovery, i have been trying now for about 4 hours. I can boot into download mode, but i can not get odin to see my phone. On the same PC, odin sees other vibrants, just not mine. If i turn on the phone it just boot loops at the vibrant/i9k screen. My pc makes the usb plug/unplug noise as it boot loops turning on and off with the vibrant/i9k screen telling me that the drivers could not be installed. If i plug my gf's vibrant in, i have no issues and odin gives me a com port. Any suggestions?

THANKS dude only if if you posted this before when my vibrant was soft bricked... I sent it back I didn't know what to do hehe!
Also a question... if I do this.. will it remove root and everything also does my phone HAVE to be soft/hard bricked to use these methods because I might want to just use the soft brick Odin thing when I want to get back to normal without being soft bricked...
Sent from my SGH-T959 using XDA App

@ Adam, have you tried installing the drivers manually? If not, then I don't know what to say =/ But I'm SURE people around here can offer some help
@Rider, You're welcome, and yes it does remove everything, and yes it does work even when you're not stuck in bootloops

draikz said:
@ Adam, have you tried installing the drivers manually? If not, then I don't know what to say =/ But I'm SURE people around here can offer some help
thanks for your reply
If odin recognizes one vibrant( the working one, my gf's) and not the other(my bootlooping) do you still think its a driver issue.
Macnut is a amalgam of almost all the galaxy s's. when my phone booted it would startsaying vibrant, then flash i9k. i did install kies thinking it would have some drivers for the i9k. I will try monkeying with the drivers a bit and let you know.
Click to expand...
Click to collapse

Ok, try playing around with the USB cable, trying different USB ports, too.

No problem, remember to post your results once you try it

NEED HELP!!! Screen black!

I have a big problem! i wanted to flash with Heimdall... I tested a rom, but not satisfied, i wanted to test another one and my Samsung Galaxy Tab don't want to turn on...
No Samsung logo, No Galaxy Tab logo... Nothing! Like the Samsung Galaxy tab don't want to turn on when i push the ON/OFF Button!!!
What can i do???
Please help!

Please HELP!

EmryX said:
Please HELP!
Click to expand...
Click to collapse
If you're able to provide information as to exactly what you did to get your device in this state that would be immensely helpful in regards to diagnosing the problem. However you'll probably be able to recover your device using a custom jig.

I can not be more explicit. I wanted to try a rom. Wasn't satisfied so i downloaded another one (with cache file, database file, bootloader, etc... ) but the file have been dowloaded too quickly (i think the zip file was corrupted...)
So i did the flash, and my tab don't wake up. I don't have a brick state (with the usb and pc logo). I don't have the samsung/galaxy tab logo. Ihave nothing on my screen. Like my on/off button was broken...
And whatever i do(like the combo on/off with the volume down), my computer don't recognize the tab. So i can't flash it again.

EmryX said:
I can not be more explicit.
Click to expand...
Click to collapse
Well you're going to have to be if you want anyone's help.
What files did you flash? Which software did you use? Which version? Were you given errors? How did you flash the files?
Please provide a detailed step by step run-down of exactly what you did.

I can't remember, and i'm french, i can't find the right word to explain the situation...
I flashed my tab with HEIMDALL (the last version on the website) i think the problem is when i wanted to flash with the file EURO.pit (i choose this file in the "bootloader" category of the software HEIMDALL).
The problem... My computer can't recognyze the tab because i can't turn on the tab, so... I don't know what can i do.
EDIT: And HEIMDALL don't tell me any error. Just "Flash Complete, Rebooting"
EDIT 2: I think i used the wrong bootloader...

Up?
What can i do? Is a batterie problem?

Let your Tab charging for 5 Hours and then try again.

Sounds like you've flashed a bootloader not designed for your tablet. Luckily all Galaxy S devices store a backup copy of the secondary bootloader which is utilised when a certain resistance is detected on the USB port. You can send it off to Samsung and they'll repair it, but they might charge you. The other option is to build your own custom jig which will activate the backup secondary bootloader.

now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today

@Benjamin: I can do a custom jig for a galaxy tab?
EDIT: But i don't think the jig will help me..
"If your phone screen is always black, that is it does not display the white Galaxy S/Samsung/AT&T logo when you switch it on, then sorry, this jig will not help you. "

HELP please? Can i do a custom jig for the galaxy tab? And How?

press and hold the power button for 10 second make sure it totally off
then try to enter download mode
if u are able to enter download mode
flash roto jme v4
if it a battery problem
i think it may be battery flat, try plug it in to the charger see if it work after 10 min

suprajztwenty said:
now ive got the same problem. i tried a custom recovery i found in the "bible" sticky...clock work wasnt working when i was doing adb commands. the recovery i tried is called 3e. all it would do is reboot, t-mo logo and then bootloader words would flash very quick and black screen (backlit) press the back button and i got the triangle droid.
then i got it to go into download mode and tried a rom with odin this is the rom if it helps
GT-P1000_P1000XXJME_P1000OXAJME_P1000XXJMB_P1000XXJME_XX_ITV.zip.enc
unzipped, selected in pda and clicked start. failed at the last second and the downloading android screen on tab was stuck so i powered it down.
stupid stupid stupid!
now it wont turn on period, i get nothing from usb connection or secret button presses.
ill try the "rig" tomorrow, but how will i hack up this galaxy usb to work? the guide says micro usb but obviously thats for a phone.
please help if you can, i just got this thing today
Click to expand...
Click to collapse
almost the same thing happened to me. how ever mine will not turn on at all. it gets warm when it charging and then cold when the battery is dead. i have it sitting until it drains.
i am waiting to hear from Samsung. I will keep you posted.

Can anyone out there help. I tried to load overcome's rom and it passed all the steps, and then the screen just went dead

Try to power on together with volume down bro. Lets see if the android image with broom will pop.
Sent from my GT-P1000 using XDA App

[Q] Phone, Exclamation Triangle, PC - No Download mode

I'm really sorry, I searched for solutions but didnt found one that fits my problem.
I'm a total newbie and ****ed up my phone in many ways. I started trying to install something it wasnt suposed to work on my phone (rom destinated to 9000 and stuff). I have a Samsung Galaxy S GT-I9000b (sold to latin amarica) and came from factory with android 2.2.
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Before I try any further I'd like your advices as how to procede regarding my 9000b. Pulling the battery out, putting it in again and holding either vol down or both volumes and either pluging the phone on usb or pressing power allways gives me the same result, the screen with phone exclamation triangle and pc.
So, before I buy a jig cable on ebay that will probably take 3 weeks to get here (Brasil) is there anything else I can try?
Please help me, I'm desperate and I dont want to take it to assistence, it would cost me much money and ruin all my courage in trying to use Roms.
Thanks alot and sorry for the bad english.

so did you have the 3 button combination before this happened ??
have you tried to charge the phone whilst powered off, then when the phone gets hot, try download mode then ? sometimes this works, as heat can help download mode work.
another thing that has worked for SOME people, is leaving the battery out for 10mins, doing the 3 button combo, and whilst holding the 3 buttons, insert the battery.
you could try these and see what happens,
And 3 weeks delivery for the JIG is a long time, couldnt you make one in less that 3 weeks.

If you can't get into download mode, you are screwed until you get your hands on a jig, simple as that. Just wait. Patience is a virtue.

Thanks in advance for the quick reply guys, I ordered the jig, estimated 20 days, usualy it takes the same amount from the central postal ofice to my home since they allways restrict packages from hong kong. I'm considering making one but I'm a total denial in eletronics.
I was able to get to download mode before this problem yes. I would just hold down vol and center key and then power. Now even when I plug it in to charge I get the screen with the exclamation.
Any more sugestions?

no other suggestions other than whats listed above
looks like you will have to wait for the JIG to arrive.
Loner-phone here you come lol

Then I have a couple of questions.
1) Since I plut it in directly on the power and still recive the same screen is the phone still charging? Or once the battery is over I'm ****ed up twice?
2) Is there any chance that the jig wont work or I in some way ****ed up my I-9000b permanently?
3) After I make/get a jig how should I procede? I heard about one-click odin, but apears that its for another model of phone, and since I got on all this trouble exactly for trying to do things to my phone that were suposed to be only for another model, I'm kind of lost.
Inputs?
Thank you all for already awnsering my questions.

1) the system is corrupted so the charging indicator will be too - thus leading to Phone ! PC image - this is the only image the phone can now produce
2) The 'JIG' has a 100% success rate - providing that the motherboard is not fried - which it isnt as it still shows an image
3) the jig is just a modified USB, just plug it into the phone whilst powered off and download mode will appear, and then you just attach your genuine USB cable and flash stock ROM thru ODIN.

azzledazzle Thank you very much for your patience, but since I`m a total newbie to all this, some of your awnsers I didnt understood fully, do you care explain me better?
Regarding question 1) The power indicator is corrupted, ok. But this means if my battery die out of usage it wont charge again or just that the indicator wont show that is charging but the battery actualy is charging?
and for question 3) Is ther any tutorial directed to I-9000 on how to use odin to flash a stock ROM ? like baby steps? After all that I'm even afraid to turn the phone on, so I would like to know exactly what to do. I`m cosindering asking someone with technical skills to help me on a home made jig.

oh im sorry, i get carried away sometimes.
1) i assume the battery will be charging yes. only the phone will not be able to show this due to the corruption.
2) when you have made / bought a JIG (link below) you ideally want to flash a Stock ROM, you can get this from samfirmware (link below) and also on this site is a tutorial on how to use ODIN, its fairly easy if you just read the instructions provided.
JIG: http://forum.xda-developers.com/showthread.php?t=819551&page=3
Firmwares : www.samfirmware.com
ODIN download and guide : http://forum.xda-developers.com/showthread.php?t=846913

Its a miracle, somehow I managed to get into download mode. But I'm still a bit insecure
Here is the deal, I dowloaded a .tar file that alledgedly from my carrier and for my country. The tar is named JPA_JP3_JPA.
Inside the file there are cache.rfs factoryfs.rfs modem.bin param.lfs zimage
But what should I put where on ODIN if I only have PIT PDA PHONE and CSC?
And how can I discover if I should use pit 512 or 803?

Should I consider a master clear setting?

the file you downloaded is a full firmware compressed into 1 .tar file.
so in odin load the .tar file into PDA section and THATS IT !!
DO NOT USE PIT WITH THIS FILE.
press start and enjoy
PS do a factory reset after the flash

vongikking said:
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Click to expand...
Click to collapse
Hello all!
I've got my hands on a GT-I9000 today.
It's got 2.3.3 Android on it.
Wanting to install CM7, I was first of all trying to root it.
I'm on Mac OS X 10.6.8, thus I downloaded heimdall-frontend and the "Hardcore's SpeedMod kernel with ClockworkMod Recovery".
When I put my phone into DL Mode and connect it to my Mac, I can't write the image to it.
Heimdall is failing with "Failed to receive device info response!"
What do you ppl suggest me to do now?
Thanks,
F.

Try to flash with Windows!
Sent from hell to take your soul

Lunchbox115 said:
Try to flash with Windows!
Sent from hell to take your soul
Click to expand...
Click to collapse
Indeed I now managed to get Windows XP PC.
one trouble still remains: after rooting the device remains in an infinite reboot loop!!!
It only stops when WiFi is disabled.
Any help bout this?
Or at least any means to get back to a factory ROM?
I got 2.3.3 before flashing...
Thanks!

Try to flash the nightly again, should solve the bootloop-issue.
Or you can wipe cache/dalvik cache, this helped me too.

Lunchbox115 said:
Try to flash the nightly again, should solve the bootloop-issue.
Click to expand...
Click to collapse
Which nightly do you intend me to re-flash?
Or you can wipe cache/dalvik cache, this helped me too.
Click to expand...
Click to collapse
How do I achieve these two things?
Thanks,
F.

Just take the latest nightly. To wipe the cache/dalvik cache you have to boot into recovery (hold volume UP + home button + power button.
Sent from hell to take your soul

Staying optimistic....

Hi all,first off im not gonna say my tab is bricked im to much of a noob to do that,but I've gotta say I'm really worried that my tab might be toast.To cut a long story short my son gotta hold of my tab without my knowledge and flashed a rom onto it.From what i can ascertain he's not followed the instructions on installation,instead of using the computer he's downloaded a zip file with the rom on it,then he's gone into recovery mode via clockworkmod(i have rom manager app on my tab)he's then wiped the cache and the dalvik and then proceeded to install the rom from the SDcard that he'd downloaded earlier.Anyway he said it seemed to have worked because he got a message on screen saying thank you for installing overcom rom v2.0.1 hermes installation complete enjoy using it.The message was roughly like that anyway.It also said that the 1st boot could take a long time as it had to rebuild the cache and the dalvik.So wait he did,4 hours later and all that was on screen was.....GALAXY TAB
SAMSUNG......plus all the hardware keys were constantly lit.By this time id come in and discovered what he done.So i tried to put it into recovery mode so i could hopefully put another rom onto it.But when i press power and the up volume key it just goes straight to the screen i described above,I've not had a problem getting into recovery before but now zilch....Plus another thing when i plug in the charger in instead of getting the green battery symbol gradually filling up i instead get a grey battery symbol that just sits there and does nothing.
I'll be eternally grateful if anyone can get my tab going again,i bought it in the uk open to any network,so i guess its a european tab(ON BOX IT SAYS GT-P1000).Can anyone help me,I'm trying my best to stay positive lol.
Cheers dave.
Sent from my MoDaCo Custom ROM for the Advent Vega r8 using Tapatalk

Make sure your tab has enough charge (charge it if necessary by plugging it in wall socket even if there is no indication) After that try to boot it into download mode (power & volume down) or any detectable download mode by your pc. Get a stock rom from here or from anywhere (what rom was tab originally on froyo? Gingerbread?). Follow the instructions to flash that stock rom. Overcome guide has great instructions on how to restock your tab.
Kindly ask your questions in appropriate forums.

Thanks darkpal,i was on froyo,although i couldn't get into recovery mode i tried what you said,power button and volume down and was able to get into download mode.
So when i can get access to a suitable computer I'll try what you recommended.
Sorry if this post was in the wrong place my heads been all over the place since my tab has been down.
Thanks again for the tip and fingers crossed it will work. Dave
Sent from my Liquid using Tapatalk

I was about 99% sure thats what your son did. He tried loading the gingerbread overcome rom over froyo. And that resulted on a non bootable state (or as some call it soft brick). GB has different bootloaders than froyo thats why a stock gingerbread should be installed first before overcome 2.X.
Hope to see you up and running soon

Good luck man... just try everything, never give up!
It's because of the wiped dalvic cache!
ps: you should check out some bootloop problem threads. use search!

Soft Bricked GSM Galaxy tab (phone---!---computer symbol(

my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!

sourabh12 said:
my tab is rooted and is running 2.2.I decided to flash cwm via odin,i put it in download mode and flashed cwm but odin showed a 'fail'.i tried flashing it again,there was a power cut and the computer unfortunately stopped in the middle of flashing.the tab since then is showng a phone--!---computer symbol.i tried going back into download mode,but luck.odin was still detecting it,i tried to flash cwm again,but no luck.i let it discharge completely.
now the screen with the phone---!---computer wont come up until i plug it into the charger,as soon as i remove the cable,the screen vanishes.i tried to charge it for nearly 6 hours,but still that screen wont come up after i unplug the charger.when i press and hold the power button while the tab is connected to the charger,the screen with the symbol again comes up and vanishes after a few seconds,ive seen a one click unbrick solution for this,but for that to happen the tab should charge and the screen with the symbol should come up even when the tab is unplugged.please help!!
Click to expand...
Click to collapse
i guess your gonna download a firmware on 2.2.1 and flash it..........but i recommend 2.3.3 firmware..try it on mine the ......!....... but still odin detects it......2.2.1 is old try AOKP for are tab....best rom

First, which tab is yours.
Edit: from your pm you indicate P1000.
OK, I sounds luke a broken record now but here goes.
Have you had a look at overcome method.
You need to flash GB-stock-safe-v5.
Sometimes even when screen is blank, it can still be a download mode.
So, be sure that it is charged (using original wall charger).
Then ready Odin and the files in proper places and pre connect the tab to PC.
Then boot to download mode and quickly flash using Odin.
http://www.teamovercome.net
Read the guide,
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
Missing pictures can be seen there.
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
After it is revived, you may want to continue.
If so.
Jump here for the kernel
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Sent from my GT-P1000 using xda app-developers app

Read my post at the bottom of this thread:
http://forum.xda-developers.com/showthread.php?t=1826324
I had the same issue but I've now sorted it.

tab working again!!
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.

What about a Tab P1000N? What can be done with that one?

One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.

priyana said:
One Click Unbrick (by Adam Outler) is not a P1000 specific software.
It should work for P1000N too.
Click to expand...
Click to collapse
Thanks, it did work for me.

You saved my world
sourabh12 said:
i thank everyone who replied to my post,i have found an easier way to unbrick it.i connected the tab to the computer and after 20 min it showed the screen with the mobile---!---computer symbol.i downloaded an application called one click unbrick,in the app i clicked unsoft brick and the tab imediately started to my surprise.it is now working properly,only the time and date of the device were reset.agai thank everyone for giving me these valuable info.=):highfive
one click unbrick tool in attachments (you need java installed for this to work)
i now have to flash cw and install that jellybean rom right away.
Click to expand...
Click to collapse
I looked every where for 24 hours and then I ran across your post simply......now I and anyone else that has this problem knows to let the tablet charge on the computer our laptop for 20 mind and then the bricked download screen will appear and your good to go you post was very helpful maybe the only real method out there thanks a million:angel::good: