[Q] galaxy w t679? - Samsung Galaxy Exhibit 4G

im from pr and bougth a galaxy w t679 from claro and im trying to find roms for it but seems to finds either galaxy w i8150 or exhibit t679 it seems that the exhibit is the same but can i flash things from exhibit tmobile? being a cellphone from claro will everything work?

What does your 'about phone' says?
Sent from my SGH-T679 using xda app-developers app

N3Ti said:
What does your 'about phone' says?
Sent from my SGH-T679 using xda app-developers app[/QU
sgh-t679 to em looks like a exhibit but claro puerto rico name it galaxy w
i install cwm the same way as in exhibit but im afraid to flash a rom till im sure it wont brick it
Click to expand...
Click to collapse

If it says 679 then it is likely to be exhibit varient. If it says i8150 then it is more likely galaxy w varient. Go to setting and then about phone.

N3Ti said:
If it says 679 then it is likely to be exhibit varient. If it says i8150 then it is more likely galaxy w varient. Go to setting and then about phone.
Click to expand...
Click to collapse
rigth what worries me its the system seein that exhibit is from t mobile and t mobiles use other bands
examples
here in pr claro pr and att can switch phones without no problems but if i plug a tmobile sim card into a att or claro phones the internet got stuck at edge (problems with the bands ) the question will be will a rom from the exhibit contains things from tmobile ?
should i just flash 679 roms ?
i hate when carrier puts their own names to handsets
thanx for the reply

this is what my about phone have
model number sgh-t679
android version 2.3.6
baseband vers.
t679walg2
kernel
2.6.35.7-perf-t679walg2-cl1169838
buid
gingerbread.walg2
what ya think should i man up and flash the exhibits roms?

Make backup first if you ever decide to flash custom rom. that way you can go back where you were.
Do not flash tmobile stock or stock rooted or peach if you are worried about baseband as these will replace your current baseband with t-mobile one. So you will have to stay with cm9/10 related group of rom.
We have people from Canada flashing roms here just fine. I guess you may be the first one from pr. So decide if you want to take the risk.
Sent from my SGH-T679 using xda app-developers app

I looked around google but havent found a definitive answer. If you do flash post back and let us know how its working.
---------- Post added at 10:29 AM ---------- Previous post was at 10:23 AM ----------
It sure looks to be the same phone. Even our wiki speaks of a galaxy w.

gonna flash cm9 just to b sure thanxs
letting yall know in a couple of minutes

Dont forget the nandroid

*looks at watch

There has been a little confusion, so allow me to clear it up once again SGH-T679M is marketed in Canada as the Samsung Galaxy W 4G by Bell Mobility. With the exception of the M in it's model number, it is precisely the same as T-Mobile's Samsung Galaxy Exhibit 4G and it's former Samsung Exhibit II 4G monikor. It seems apparent that your carrier is doing the same thing. In other words, you're in the proper forum as long as your About Phone says T679 - stay away from the I8150 forum if you don't want to brick your phone (Well, you can go ahead and read - just don't flash anything from there)

ok so cm9 works like a charm
wonder if the others roms will to. i like the status bar toggles

If one works chances are the rest will as well
Sent from my SGH-T679 using xda app-developers app

thank u all for the comments im using cm9 and its working great planning on doing another nandroid and flash rebelrom i just hope my data wont stay in edge

Related

US Cellular Galaxy Tab Development

Is ther anyone working on development that would he compatible with the Galaxy Tab from US Cellular? Are any of the ROMs or CWM able to be put on the USCC Tab?
Sent from my SCH-I800 using Tapatalk
US Cellular Tab Question
I have the same question. I have a Tab for the US Cellular network. It says it's an SCH-i800 for CDMA. Isn't that the same model as the Verizon? Would "stuff" for Verizon work on this Tab??
Thanks for listening!
Ugh, I thought I'd read enough before going today to buy a used US Cellular tab from someone (I'm only using it in WIFI mode, have no need for data connection). Got rooted fine via z4Root but now don't know what else I can do.
I flashed ClockworkMod for Verizon as saw another post that said since both CDMA should work. It flashed but when boot into recovery goes into normal Samsung recovery.
Is rooting as far as you can get w/ US Cellular or can I flash ROMs somehow?
I'm not sure if this is the same as the Samsung Transform, but when I flashed a custom recovery, you have to make it stick somehow, i believe by flashing a custom rom. I'm not 100% so keep reading around the forums but thats how I had to do it for the Samsung Transform.
Sincerely,
D3luSi0n4L
I have a US Cellular Galaxy tab and I just flashed ICS to it and it runs like a champ!
I followed the instructions at [HOLY CRAP][SPRINT P100] Stock to ICS - Complete Walkthrough
I was afraid I would mess it up but it works great now!

Samsung Galaxy s3 4g (GT-I9305T)

hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:
Do you mean the Telstra GSIII LTE?
Do you mean the Telstra GSIII LTE?
If yes, then try asking Telstra, though probably they won't give an answer.
I believe they might not be compatible because Telstra has history of modifying models,
both hardware and software, which compromised the phone experience under other carriers.
And assume they are compatible, then why it is named I9305T instead of I9305?
Obviously making one model is easier than making an I9305 and another version with a "T".
So, I guess you probably should not try the firmware for another version of the GSIII LTE until you get a CLEAR answer
Good Luck!
NevErSn0w said:
hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:
Click to expand...
Click to collapse
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
NevErSn0w said:
hey all, just wondering if the GT-I9305 and the GT-I9305T are the same or not, and whether the GT-I9305 stock firmware is transferable over to the GT-I9305T. :laugh:
Click to expand...
Click to collapse
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:
awesome, thats great to know.
i was also doing some searching on the internet earlier today and realized that my s3 ( GT-I9305T) was only running the 4.1.1 version of android and that the GT-I9300 was updatable to 4.1.2, i then went on to check for an update which came back unsuccessful saying that i had the latest version of firmware, i understand that they are releasing it model by model but does anyone have any idea on whether the GT-I9305T will get the update? and also any estimate on when?
MrM77 said:
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:
Click to expand...
Click to collapse
Where did you get the stock telstra firmware? cheers
bretto_aus said:
Where did you get the stock telstra firmware? cheers
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/?page=3&model=GT-I9305T&pcode=TEL&os=1&type=1#firmware
there's the 4.1.1 stock telstra firmware.
cheers
txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
im wondering can istill root my devise its the gt-i9305t but it runs kitkat 4.44
just quickly hat do u mean by i9305t modem i dont understand
txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
thought id repeat myself since i dont know where to write my reply.i dont understand what you mean by using "i9305t modem". i always just thought a modem was a modem nessassary for internet?
---------- Post added at 08:18 AM ---------- Previous post was at 08:12 AM ----------
txr33 said:
This has been talked about a bit but Yes you can use I9305 firmware on a I9305T. But you need to use a I9305T modem otherwise you will not get 4G reception and some modems no reception
Sent from my GT-I9305 using XDA Premium HD app
Click to expand...
Click to collapse
ZachariahZ said:
Do you mean the Telstra GSIII LTE?
If yes, then try asking Telstra, though probably they won't give an answer.
I believe they might not be compatible because Telstra has history of modifying models,
both hardware and software, which compromised the phone experience under other carriers.
And assume they are compatible, then why it is named I9305T instead of I9305?
Obviously making one model is easier than making an I9305 and another version with a "T".
So, I guess you probably should not try the firmware for another version of the GSIII LTE until you get a CLEAR answer
Good Luck!
Click to expand...
Click to collapse
here do you find out excately what model phone it is mine syas in different places Samsung galaxy s3 GT-i9305t 4g/telstra, how do i found out if it is LTE?
binga517 said:
here do you find out excately what model phone it is mine syas in different places Samsung galaxy s3 GT-i9305t 4g/telstra, how do i found out if it is LTE?
Click to expand...
Click to collapse
Gt-i930[5] = lte(4g)
gt-i930[0] = regular 3g model
Reply and question
Hey m8 thanks for reply could u point direction to how to root my phne
https://forum.xda-developers.com/ga...msung-galaxy-s3-unified-toolkit-v8-0-t1703488
Search the XDA forums all the information you want is there already. Also remember to do a Nandroid backup.
question
MrM77 said:
As far as I know they are exactly the same aside from slight software differences. I've got a GT-I9305 bought from Kogan which is a Hong Kong version. In stock form it worked on the Telstra network but the signal strength was not all that great and it use to drop of the network on odd occasion which required a restart in some case to reconnect. I got a bit tired of it so I flashed it with the official Telstra ROM last Friday. So far everything is running great, signal strength is as expected and it did not drop of the network at all since the re-flash.
All I can say now my phone is now a GT-I9305T and it works as it should :good:
Click to expand...
Click to collapse
my phone is model no: S3 GT-I9305T 4G teltra modified, Android version 4.4.4 kitkat, Baseband Version I9305TDVUEOK1 i have been having trouble finding it correct CF-Auto-Root file. would you know of a site where i could find this. thanks my name is binga517
---------- Post added at 02:31 PM ---------- Previous post was at 02:16 PM ----------
Phone model GT-I9305T 4G telstra modified
Android version 4.4.4 kitkat
Baseband version I9305TDVUEOK1
Build number KTU84P.I9305TDVSEQA1
Kernal version 30.31-6186118 [email protected]#1
SE for Android Status: Enforcing SEPF_GI9305T_4.4.4_0048
Please can someone help me to find the correct CF-Auto-Root file. or since i would like to at least upgrade it to lollipop 5 can i use another file, im such a newbie i only learnt about unzipping couple days ago. PLEASE HELP
binga517 said:
my phone is model no: S3 GT-I9305T 4G teltra modified, Android version 4.4.4 kitkat, Baseband Version I9305TDVUEOK1 i have been having trouble finding it correct CF-Auto-Root file. would you know of a site where i could find this. thanks my name is binga517
---------- Post added at 02:31 PM ---------- Previous post was at 02:16 PM ----------
Phone model GT-I9305T 4G telstra modified
Android version 4.4.4 kitkat
Baseband version I9305TDVUEOK1
Build number KTU84P.I9305TDVSEQA1
Kernal version 30.31-6186118 [email protected]#1
SE for Android Status: Enforcing SEPF_GI9305T_4.4.4_0048
Please can someone help me to find the correct CF-Auto-Root file. or since i would like to at least upgrade it to lollipop 5 can i use another file, im such a newbie i only learnt about unzipping couple days ago. PLEASE HELP
Click to expand...
Click to collapse
Have you tried this search?
https://www.google.de/search?hl=de&...0...1.1j2.64.psy-ab..0.2.341....0.hub_oipjIe0
I guess you will find help in one of the search results
First of all download Samsung USB Drivers: https://drive.google.com/open?id=1I3ilHBfl1lSvkqQwHZTEOE6usggQqQGb
Download TWRP for GT-I9305T: https://drive.google.com/open?id=1kmpXSVGdd_XR2WojWqAe8rd_Xm7gZ8Lj (its an old version of twrp but it should work)
After downloading twrp download Odin3: https://drive.google.com/open?id=10CLH6TqF6PLiqnMnjqY5IgsfU5KjX-F-
Extract it od desktop
Now power off your s3 and boot into download mode holding Power Button + Volume Down + Home Button
You will see that screen turned on and press Volume up to continue into Download mode
Connect your s3 into your pc via usb cable. Open Odin3 and you will see on the left side message that says Added!!
Now click od the AP button and select twrp that you downloaded
Go to options tab and make sure that Re-Partition is unticked, Auto-Reboot and F. Reset Time keep ticked
Finally click Start button and the twrp should flash, you will see green text saying PASS!
After flashing twrp the phone should automatically reboot, download SuperSU: https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.82-201705271822.zip
Turn off the phone again and hold Power Button + Volume Up + Home Button and it should boot into twrp, swipe to allow system modifications, and select install and find the supersu.zip file, select it and swipe to confirm flash.
After reboot your s3 should be rooted. You will have SuperSU app in the menu.

Samsung galaxy s3 GT-I9305t rooting need help please

Hey guys I'm new to rooting devices and got one about a month ago mine is a Samsung galaxy s3 GT-1903T on Telstra 4G. I have done a lot of searching over the web and have only found one thing, the Samsung galaxy s3 toolkit but I don't know if it works for my phone so if anyone could help a noob out that would be really great thanks
80 views still no reply please someone
Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2
apsmiles said:
Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
But can u at least answer this for me is the GT 19305T the same as I9305? If so i already have toolkit but the first thing asks me for my build which could be 11,12,13,14. idk which one cant find the last letters in system info
Yes the "T" in the name is just the Telstra branding, if you follow ausdims rooting thread you will be fine
Sent from my GT-I9305 using Tapatalk 2
apsmiles said:
Mate, if you go onto the android dev forum for this handset you can get a full write up on how to root, backup your efs/nv data, and then how to flash a new rom (eg pandoriam, ripper, rxtreme, wanam etc) if you can't find something then search the forum for the answer. It should all be thsre , good luck!!
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
apsmiles said:
Yes the "T" in the name is just the Telstra branding, if you follow ausdims rooting thread you will be fine
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
Thank you
The 'T' in the model number isn't branding. The phone is actually slightly different.
I have a friend who works for Telecom here in NZ and they also sell the I9305T.
He said it is optimised for use on Telecom's network (and obviously Telstra's too) it uses different modems and the antenna is different inside the phone.
They do however use the same ROMs and firmware. Anything intended for the I9305 will also work the same on the I9305T, except modems.
Sent from my GT-I9305 using xda app-developers app
Obagleyfreer said:
The 'T' in the model number isn't branding. The phone is actually slightly different.
I have a friend who works for Telecom here in NZ and they also sell the I9305T.
He said it is optimised for use on Telecom's network (and obviously Telstra's too) it uses different modems and the antenna is different inside the phone.
They do however use the same ROMs and firmware. Anything intended for the I9305 will also work the same on the I9305T, except modems.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Hi all,
I have a question about rooting, i followed the ausdim rooting guide and installed triangleaway but system still shows modified. Anyway, Is there a ways not to use CWM recovery and use stock recovery? how can i flash stock recovery and keep root? and if i want to update to 4.1.2, can i do OTA without losing root? Thanking you in advance
Jro03c.i9305xxalk5
Hello everyone!
New to this forum and new to Android phone. I have searched the whole forum and read through the dev-sections. Also did searches on multiple sites and through searchengines to find out what device model to use in the ToolKit...didn't find any confirming answer to my question.
As I have no posts from before, I couldn't write this in the dev-section, so I chose the thread that was closest to what I was looking for.
Question: What is the correct device model to choose in the ToolKit (I have version 7.0.0).
Information from my "about section"...
Phone: Samsung Galaxy SIII 4G
Model: GT-I9305
Android-version: 4.1.1
Build: JRO03C.I9305XXALK5
Operator: Telenor (Norway)
The options I lean towards since the only choice showing 4G, is number 21 (International 4G).
Problem is that it says it's GT-I9305N and not GT-I9305. It also says (Build JRO03C ALIA) and that does not match to my build either.
Then I look at the (International LTE), which says (GT-I9305)...which is ok.
And then number 14, which says (Build JRO03C ALK5), which is the same as mine...but it doesn't say 4G, which I have.
It might sound silly, but I really dont want to make the wrong choice here and end up having a phone that either "does not work at all"
or "does not work as it should". And before anyone says that I then should just leave it alone, my only intention at this point is to let
my anti-virus get root-access, so that the firewall works and the anti-theft works.
Hope anyone can be of help and thanks in advance.
Anders - Norway
Jro03c.i9305xxalk5
awaeraas said:
Hello everyone!
New to this forum and new to Android phone. I have searched the whole forum and read through the dev-sections. Also did searches on multiple sites and through searchengines to find out what device model to use in the ToolKit...didn't find any confirming answer to my question.
As I have no posts from before, I couldn't write this in the dev-section, so I chose the thread that was closest to what I was looking for.
Question: What is the correct device model to choose in the ToolKit (I have version 7.0.0).
Information from my "about section"...
Phone: Samsung Galaxy SIII 4G
Model: GT-I9305
Android-version: 4.1.1
Build: JRO03C.I9305XXALK5
Operator: Telenor (Norway)
The options I lean towards since the only choice showing 4G, is number 21 (International 4G).
Problem is that it says it's GT-I9305N and not GT-I9305. It also says (Build JRO03C ALIA) and that does not match to my build either.
Then I look at the (International LTE), which says (GT-I9305)...which is ok.
And then number 14, which says (Build JRO03C ALK5), which is the same as mine...but it doesn't say 4G, which I have.
It might sound silly, but I really dont want to make the wrong choice here and end up having a phone that either "does not work at all"
or "does not work as it should". And before anyone says that I then should just leave it alone, my only intention at this point is to let
my anti-virus get root-access, so that the firewall works and the anti-theft works.
Hope anyone can be of help and thanks in advance.
Anders - Norway
Click to expand...
Click to collapse
Ok, so I rooted my device yesterday after reading through like 10 more threads...just took a chance, thought to myself "guts and glory" and went for it..went well =) I chose option 14 the build was the same as mine and it worked like a charm.
I am still left with a few quesitons though...might not be relevant to the thread anymore...
Does the rooting share the same build-match requirement as the flashing of a new operatingsystem?
How do I uninstall apps that were preinstalled on an operatorlocked phone?
Anders - Norway
I think you should look for app in app store, Root App delete or something like that. Then search for you operator apps/files and remove.
Hey guys
i have the internationa galaxy s3 running 4.1.2, i haven't done anything to my phone yet and im about to root it is the boot loader unlcoked and if not how do i unlock it , could someone please help me and give me clear instructions and links please thanks you so much,
BTw i know this is the wrong thread but i cant find the right one, thanks alot guys
regards nick
NickVHD said:
i have the internationa galaxy s3 running 4.1.2, i haven't done anything to my phone yet and im about to root it is the boot loader unlcoked and if not how do i unlock it , could someone please help me and give me clear instructions and links please thanks you so much,
BTw i know this is the wrong thread but i cant find the right one, thanks alot guys
regards nick
Click to expand...
Click to collapse
1. Bootloader is allready unlocked
2.For how to root look here http://forum.xda-developers.com/showthread.php?t=2255190&highlight=how+to+root
3. Flash custom recovery, would advice this one http://www.youtube.com/watch?v=lxZf39vI0Lc. Download the .tar.md5 and flash with Odin in PDA.
4. Go to the CM thread and download the latest nightly and Gapps (Google apps) and place on the sdcard.
5. Go in recovery and wipe cache, dalvik cache, format system and data factory reset and then flash the CM rom and Gapps right after another without rebooting, reboot and you`re done.
hi
hello does it matter that it's a different usb cable, its of htc because the one i got with the phone doesnt seem recognise my phone on the pc
thanks
Is it better to update (to current) android version?
Or is there ANY practical sense to ROOT at lower level android v. Then apply OS mainframe.. YDVTY

(Q) Very quick question on returning to stock...

I have a GT-I9305T (Telstra Version) currently running CM10.1, I would like to unroot the phone and return it to factory original stock...
1) can I flash a stock i9305 or does it have to be a i9305T based ROM? - where can I get these?
2) should I run triangle away in CM10.1 then flash the stock ROM, and run SU to unroot?
3) after all that is done I still have CWM right? how do I return that to stock?
THANKS IN ADVANCE...
GODSPD said:
I have a GT-I9305T (Telstra Version) currently running CM10.1, I would like to unroot the phone and return it to factory original stock...
1) can I flash a stock i9305 or does it have to be a i9305T based ROM? - where can I get these?
2) should I run triangle away in CM10.1 then flash the stock ROM, and run SU to unroot?
3) after all that is done I still have CWM right? how do I return that to stock?
THANKS IN ADVANCE...
Click to expand...
Click to collapse
1) Yes you'll need a I9305T based rom, it's to do with basebands and 4G (e.g. i9305 can't do 4G in Australia while i9305T can...)
2) I forget how it is with triangle away, but that's up to you. Whether or not that red exclamation mark bothers you or not. Also it'll automatically unroot when you flash the stock rom via Odin. So no worries about that!
3) CWM will be removed (stock recovery restored/added) and any custom kernels will be gone too.
Good luck, but becareful with Odin. If you don't feel certain about something, look it up on YouTube (as their explanations will be better as you'll be able to view it).
Hope this helped
thank you
there's a button for that
Valdorous said:
1) Yes you'll need a I9305T based rom, it's to do with basebands and 4G (e.g. i9305 can't do 4G in Australia while i9305T can...
Click to expand...
Click to collapse
This line is complete bull****. You need the "T" modem only not the rom for your model.
Sent from my GT-I9305 using Tapatalk 2
me_ashman said:
This line is complete bull****. You need the "T" modem only not the rom for your model.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
He wants to unroot and go back to stock, he is using a T model.
Research before you come and talk...
"The I9305 is the European version and the difference is:
The I9305 operates on the LTE800 & LTE2600MHz bands
The I9305T operates on the LTE1800 & LTE2600MHz bands
Therefore the I9305 will not currently operate in 4G mode in Australia (will only operate in 2G or 3G mode) as Australia is currently using the LTE1800MHz band (both Telstra & Optus).
If you are living overseas and want to visit Australia, then the I9305 will work (not at it's full potential though). If you live in Australia buy the I9305T."
Source?
http://crowdsupport.telstra.com.au/t5/Android/Difference-between-I9305-and-i9305T/td-p/113702
So please...
The likes of you are not wanted here.
In-case you meant he just needs any old rom for i9305 and just flash a modem for the T. There are from what I understand a complete different line of stock roms for the T version. Just simplify it and let him flash the official stock for the i9305T, if you want to go into details feel free to. I offered help and gave him a valid answer.
Claiming my answer is bull reflects badly on you and only you.
And to prove the existence of a stock rom specifically for the i9305T - here you go: http://forum.xda-developers.com/showthread.php?t=2080463
Get a life and stop trying to answer an already answered question.
Good day to you sir...
I live in Australia and have both t and international versions. Both work on 4g. I stand corrected if he wants to go back to stock on t version.
But you are wrong about the T version only doing 4g here. Both t and non t work perfectly here and you can use either rom on both its the modem that's specific that was my point.
Sent from my GT-I9305 using Tapatalk 2
me_ashman said:
I live in Australia and have both t and international versions. Both work on 4g. I stand corrected if he wants to go back to stock on t version.
But you are wrong about the T version only doing 4g here. Both t and non t work perfectly here and you can use either rom on both its the modem that's specific that was my point.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
The thing is, you're stating that Telstra themselves lied when they said using an i9305 Rom/firmware package is not something that is recommended and hasn't been tested.
They also said that there is a difference...
Also, they way you came and said that was 'bull' was childish and plain rude.
I answered the question correctly and showed facts.
You've done nothing but call part of my explanation 'bull' and nag about how there is then no difference when clearly there is.
Next time I recommend you be more friendly when claiming someone is wrong.
I recommend you leave it at that, cause I am.
Can Europe GT-I9305 run with Telstra Rom?
Hi,
I have a Galaxy S3 4G GT-I9305 bought via Kogan. Came with a French splash screen.
I currently am using Telstra but have rooted the phone and running Cyanogenmod.
I want to unroot the phone. Can I use the Telstra GT-I9305T rom? Will it work or is the modem different?
Thanks
Valdorous said:
He wants to unroot and go back to stock, he is using a T model.
Research before you come and talk...
"The I9305 is the European version and the difference is:
The I9305 operates on the LTE800 & LTE2600MHz bands
The I9305T operates on the LTE1800 & LTE2600MHz bands
Therefore the I9305 will not currently operate in 4G mode in Australia (will only operate in 2G or 3G mode) as Australia is currently using the LTE1800MHz band (both Telstra & Optus).
If you are living overseas and want to visit Australia, then the I9305 will work (not at it's full potential though). If you live in Australia buy the I9305T."
Source?
http://crowdsupport.telstra.com.au/t5/Android/Difference-between-I9305-and-i9305T/td-p/113702
So please...
The likes of you are not wanted here.
In-case you meant he just needs any old rom for i9305 and just flash a modem for the T. There are from what I understand a complete different line of stock roms for the T version. Just simplify it and let him flash the official stock for the i9305T, if you want to go into details feel free to. I offered help and gave him a valid answer.
Claiming my answer is bull reflects badly on you and only you.
And to prove the existence of a stock rom specifically for the i9305T - here you go: http://forum.xda-developers.com/showthread.php?t=2080463
Get a life and stop trying to answer an already answered question.
Good day to you sir...
Click to expand...
Click to collapse
"Unfortunately Jupiter you have been misinformed. Optus provide a 1800mHz LTE network and sell Samsung I9305 handsets to use on this network. The I9305 will also work on the Telstra 1800mHz LTE network.
Google is your friend. Try these links for some light reading and education."
Maybe you should have read the thread you linked to a bit better you arrogant clown, the above was the last post.
Valdorous said:
Therefore the I9305 will not currently operate in 4G mode in Australia
Click to expand...
Click to collapse
I know this is bulls#@t because I have the optus GT-I9305 not the I9305T, my girlfriend has the I9305 on optus too and we both get 4G.
Pull ya frikken head in and don't shout someone down when you appear to know sfa about the 4G networks in Australia.
Yes, to go back to stock the I9305T rom is needed for the OP but saying that the I9305 WON'T get 4G in Aus is complete and utter crap.

Root help GT-I9305T (vodafone)

Hey guys, I just got a galaxy s3 4g from vodafone and I need some help with rooting since it seems there might be a difference in things i need to flash depending on the model
Mine is GT-I9305T (I see a lot of people saying it's Telstra? but I got this from vodafone.. not sure if that is significant)
So can someone help me with rooting the GT-I9305T
Your question has been posted multiple times . Forum rules require you to search before posting .
Google <<< I9300 your search terms > xda
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
jay0514 said:
Hey guys, I just got a galaxy s3 4g from vodafone and I need some help with rooting since it seems there might be a difference in things i need to flash depending on the model
Mine is GT-I9305T (I see a lot of people saying it's Telstra? but I got this from vodafone.. not sure if that is significant)
So can someone help me with rooting the GT-I9305T
Click to expand...
Click to collapse
I have i9305 from optus running on Vodafone, would like to flash Vodafone modem to it. Can u pls tell me your phone baseband version ? Thanks
Sent from my Nexus 7 using Tapatalk 4
JJEgan said:
Your question has been posted multiple times . Forum rules require you to search before posting .
Google <<< I9300 your search terms > xda
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Click to expand...
Click to collapse
yes I'm sorry about that, I was just intimidated at first since I thought there was a significant difference between i9305 and i9305t
imatrix said:
I have i9305 from optus running on Vodafone, would like to flash Vodafone modem to it. Can u pls tell me your phone baseband version ? Thanks
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Well I rooted and flashed a custom rom on to my phone and so I don't know if this is the one I had originally in the stock rom.
Baseband version I9305TDVBLL3
Me to
jay0514 said:
yes I'm sorry about that, I was just intimidated at first since I thought there was a significant difference between i9305 and i9305t
Well I rooted and flashed a custom rom on to my phone and so I don't know if this is the one I had originally in the stock rom.
Baseband version I9305TDVBLL3
Click to expand...
Click to collapse
I have the same phone, GT-9305T from Vodaphone & flashed the Galaxyrom ver 4.1.2. Had problems with an earlier Galaxyrom 4.3, Ver 12.1 but Camera app has problem There are fixes available but haven't tried yet. Will try again with later release but for the moment I'm happy with 4.1.2.
Everything works & Aussie Developer so feel more confident that the rom will fit aussie phones.

Categories

Resources