{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ARM.
The Next Reliable Managed Architecture.
NOTE
- ARM or Android Reliant Management, Aims to bring full battery saving to our devices and add features not introduced. This would of course reduce battery hunger and at the same time, sustain the performance of our phones.
THIS IS A MODDED Kernel with Many fantastic features within. I am not responsible or credited for the kernel source codes whatsoever. I only modify the kernel to my needs and add more features not available from the base which will be beneficial to all of us. This Kernel is GPL Compliant and is fully Open Source. Please provide a CLEAR Credit should you use this Source as your base.
Click to expand...
Click to collapse
- Dynamic Frequency Mode - Improves Battery Life & Performance
- Added Governors for more options
- Tweaked to the limit for more performance
- Sustained Battery Life while improving Performance
- Added More I/O Schedulers for more options
- Edited/Re-Engineered Hardware modules for more Power Savings
- Overclocking up to 1.5GHz (EXPERIMENTAL. Use at your own risk)
- Overvolting for high performance activities
- Undervolting for Power Saving
Click to expand...
Click to collapse
Source Code Distribution
Github [CM] - Source
===============CHANGELOG=================
Base : CyanogenMod 10
Maintainers : nicholaschw
=Older Bootloader=
~~~~~~~~~~~~~~
Nightly 1
- Initial build
- Toolchain Fixes
- Added Powersave governor
Nightly 2
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
=Newer Bootloader=
~~~~~~~~~~~~~~
Nightly 3
- Initial Build
- Fixes for Wireless compiling bugs
- Toolchain fixes
- Added Powersave, Hotplug & SmartAssV2 Governors
- Added SIO Scheduler 2012
- Tweaked I/O Schedulers
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
Nightly 4 FINAL
- Added lulzactive governor
- Added 1.5GHz OC
- Add OV Support
- Add UV Support
- Tweaks into drivers
Nightly Plus
- Fixed Zip (Thanks to benee)
- Added some extra modules
- Rebased Sources to fix toolchain related errors
Nightly Build 6
- Reduced OC to 1.3GHz
- Fixed voltage arrays
Nightly Build 7
- Added configs for OC
- Disabled OC for now
v1.00 Golden Master
- Tweaked OC for stability
- Reduce backlight brightness to minimum
- Tweak the DVFS for UV and OV Stability
Click to expand...
Click to collapse
====================
Bugs + CM +
--------
- All CM10 Kernel Bugs
-Credits-
CyanogenMod, for providing AND fixing the source codes actively
YOU, Readers, for providing me a place to allow you to give me suggestions
Xonar, For assisting in many parts of the modifications
cyclon, for introducing new modifications
Google, For allowing me to identify whatever errors i face.
Vork & Koush, For AnyKernel Flashable Zip
benee for the zip fix
The Other Githubers who I merged commits into source
> XDA Community, Giving comments on whatevers best for implementations
ANY FLAMING OR CRITICISM WILL BE REPORTED.
ARM., Is not to be mistaken with ARM. ARM. Is not related to ARM Whatsoever in terms of name.(We use ARM for our processor, so we are related somehow by, the ARM architecture used in our phones.)
+DO NOT MIRROR+
EVERYTHING IS GOING ACCORDING TO DATE OF RELEASE.
Bug Reports? Post them here. Please include a logcat and dmesg and a brief situation of what happened visually. Doing this will get your bugs fixed faster.
How To Install
- Download the flashable zip below
- Put it into your sdcard (Anywhere you like. Just remember its location)
- Boot into recovery
- Wipe cache, Dalvik Cache (NO NEED TO WIPE DATA UNLESS YOU WANT TO)
- Install the zip package
- Reboot
- Enjoy the Excitement!
Troubleshooting?
- WIFI Failure = - WifiModule-ConservativePM-V3.zip -> super conservative on battery, less wifi reception
Download
- WifiModule-NormalPM-V3.zip -> will go in full mode when not asleep, a bit more power hungry, full wifi reception
Download. (Thanks to pengus77)
Link List - CYANOGENMOD BASED (Old Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-Nightly1-P990.zip - 5.08 MB [28-12-12]
md5: 7d36e7ac1891345ce89e62326a9979be
ARM-Nightly2-P990.zip - 5.08 MB [28-12-12]
md5: e46c3a8c989d61b67d8a4d2e437a26b9
*NOTE* OLD Bootloader Version will carry on, but each release takes longer than the new bootloader
Link List - CYANOGENMOD BASED (NEW Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-P990-Nightly3.zip - 5.08 MB
md5: d52342cb01a3b60a11cca65a8b208a0a
ARM-P990-Nightly-FINAL.zip - 5.09 MB
md5: 7c4ccf986c9fda2105b6462adcd51487
ARM-P990-NFPlus.zip - 4.78 MB
md5: 580c2e29326ea0b5d016baccffadf7f4
ARM-P990-B6.zip - 4.78 MB
md5: 0f2842812e41b235d6bf14acac2511a3
ARM-P990-B7.zip - 4.78 MB
md5: f3cde8f65bf3e7875f84247799d0e235
FAQs
+ Q: Whats the difference?
A: Read the disclaimer.
+ Q: Will I get worse performance than the Official CyanogenMod Kernel?
A: It depends on what commits are added. My Kernel only fixes bugs i can fix and which are unsolved and Of course, I will add more features not available in CyanogenMod Official
+ Q: What makes the stock kernel different?
A: You get goodies, and furthermore, better battery life and performance in this project.
Nice to see a singaporean are so gd in it. Gd job Bro
Is it compatible with unlocked new boot loader?
Sent from my LG-P990 using xda app-developers app
oOPS, me forgot to mentionn,
New bootloader version to be released next week.
This is a clean build of the old bootloader, note that only features come in next week.
For the new bootloader, the initial is next week and features come in the following week.
EDIT~
Push the newsworthy thread link now! When we go on the portal news, you get ten times more goodies! Help ARM. develop its potential!
good luck with your arm project sir. cant wait to test for the new bootloader version.
mkchan said:
good luck with your arm project sir. cant wait to test for the new bootloader version.
Click to expand...
Click to collapse
sure!
almost want to go to old BL just to try it =D. sounds erpic!
no testers reported back yet?
If it is not to much for you can you please releas the nightly not only for the new (bl) in the future. also for the old (BL).
Gr8 News, cant wait next week to try the new bootloader version :good:
Thanks for the Hard Work!
Great! Thanks for your work man, tried and seems very good! But the freq of the cpu in interactive gov is always at 1000mhz xD
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
nicholaschw said:
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
Click to expand...
Click to collapse
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
kekks said:
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Its a Kernel. -_-
thanks definitely gonna try it.....working with new bl is the great news.....Thanks....
Me gusta
nicholaschw said:
Its a Kernel. -_-
Click to expand...
Click to collapse
xD
--------------
Well, I don´t know where the 'bug' is coming from, but since the new CM10, notification light isn't working anymore. I'm no kernel developer but I think the issue is there anywhere.
It would just be nice if you maybe could have a look there, as it's a feature, I miss for more then a month now.
With the kernel on the new bootloader my Wifi doesn' t work -.-
Gesendet von meinem LGP990 mit CM10.
Please Read the 2nd OP before posting bugs here.
And, updated OP for WIFI Fix.
Take note, the fix is only for those who get those issues. DON'T Flash unless you get the problem.
Now, If you let me peacefully add more features
Saving up for an O2X!
EDIT
Updated OP for final Nightly.
Next version is the GM. Its the final version before release channel, which will be uploaded to ROM Manager's database.
hi there nicholas, i was just wondering, since this kernel looks very promissing, is there any chance of merging voodoo sound support in the future?
Related
Hey hey hey,
proudly presenting my aosp kernel for you. Big thanks to Codeworkx, this kernel is based on his source! I´m not responsible if something happens to your device!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel can be used on:
- Every AOSP based rom (e.g. AOKP, CM9, Rootbox...)
Features:
- OC to 1.35Ghz
- GPU OC to 383mhz
- RAM OC
- UV
- I/O Tweaks
- Patches for better batterylife
- Performance Tweaks
- Fastcharge
- Swpa
- zRam
- NTFS and CIFS
Changelog (3.2.0):
Based of latest source code (the updated one)
Only compiled for jellybean (based on that updates)
Massive cleanup
Optimized code used
Optimized undervolting
Really the fastest horsepower ever
Added 1.5Ghz Overclock
Added OMAP_IPU_IDLE_CONFIG
Added reduced wifi voltages for power savings
Updated SIO
Tweaked CPU-IDLE governor
Fixed 1.35Ghz jumping back
Fixed screenFlickring
Fixed screenoff animation failing sometime
Fixed heat -> lower cpu voltages should be stable enough
Changelog (3.1.0):
Now again booting
Horsepower is complete rebased - clean - fast - stable
ClockWorkMod autoreboot issue is fixed
All sources updated -> speed
USB Mass storage is working correct now on aosp kernel
Default governor is now abyssplug
Changelog (3.0.0):
Horsepower is now available as a BETA version for stock roms
Low RAM OC
Performance tweaks
Code Cleaning
Preparing for dualboot (still long way to go)
Changelog (Release 2.1.5):
Added savagedzen governor
Added sakuractive governor
Added brdzilianeax governor
Added minmax governor
[*]Added abyssplug governor
Added lulzactive governor
Added lazy governor
Added pegasusq governor
Added smartassv2 governor
Added scary governor
Added HYPER governor
Added wheatley governor
Updated interactive governor
Updated interactiveX governor
Updated lagfree governor
Changed default governor to smartassv2
Changelog (Release 2.0.6):
Rebased ics kernel
No Touch recovery for both (ics and jb) versions
Added possibility to undervolt
300 mhz as default cpu speed
Changelog (Release 2.0.0):
Jellybeaned! Both versions (ics and jb) contain same features
Changelog (Release 1.3.5):
Added core2 managemend
Fully working settingsfor fastcharge (through app)
Hope to improve stableness by disabling interactivex governor. Thanks to aidfarh!
Touch and no touch recovery versions
Changelog (Release 1.3.1):
Added interactiveX governor
Added lazy governor
Enabled ip tunneling
Changelog (Release 1.3.0):
Enabled fastcharge (enable in app)
Enabled zRam (partly working, full support in jellybean)
Enabled NTFS support
Enabled CIFS support
Added Touch CWM (Swipe up + down to navigate; swipe right to select; swipe left to go back)
Improved CWM
Improved TouchScreen support
Changelog (Release 1.1.0):
Fixed Wlan
Fixed OC
OC Tweaks
Initial GPU OC to 384mhz
Set min processor speed to 0.15Ghz for better batterylife
Rebuild whole kernel
Added more I/O tweaks
Added USB fast charging
First start at deep idle not fully working yet
Improve kernel stability by not killing kernel threads
Changelog (Initial Release 1.0.3):
keyboard: cypress: Stop notification on low battery
improve the performance of memcpy and memmove of the general version
i/0 tweaks
initial OC to 1.3Ghz
expanded OC to 1.35Ghz
prepared for lulzactive gorvernor
For detailed information visit my github commit list
Installation instructions:
- Download the attached .zip
- Put it to your internal sd-card
- Go into recovery mode
- Hit "install zip from sdcard"
- Reboot and enjoy
Download:
Horsepower 3.0.0 for Stock ICS Roms BETA!
Horsepower 3.0.0 for AOSP ICS Roms
Horsepower 3.1.0 for AOSP Jellybean Roms
__________
Core2Management:
Save your battery and disable the second core of your android device when you dont need it!
!- This app is only for dual core devices made by Samsung -!
This app should work on most android dual core devices from Samsung (maybe also on others but these are untested!). Please report on which devices the app works and on which it doesnt. You have to be rooted! Every time you reboot you need to redisable second core! If the second core starts again at some time use another governor. Not working with hotplug!
Tested devices:
* Galaxy S2 I9100
* Galaxy S2 I9100G
* Galaxy S3
* Galaxy S1
* Galaxy R I9103
* Galaxy Nexus
The app is working with stock cm10 kernel, too!
__________
Sources:
https://github.com/fuss132/android_kernel_samsung_t1/
Awesome!
Gesendet von meinem GT-I9100G mit Tapatalk 2
Now that's what i'm talking about !!
You are the BEST fuss!
This is God like! ^^
YESSSSS :beer:
Sent from my GT-I9100G using Tapatalk 2
Than man u are the best
great.... fuss does this kernel have MMC_CAP_ERASE capability flag disabled like super ICS kernel..? and does the OC include GPU as well?
Great but am I missing something or the download link isn't available yet ?
dante10 said:
great.... fuss does this kernel have MMC_CAP_ERASE capability flag disabled like super ICS kernel..? and does the OC include GPU as well?
Click to expand...
Click to collapse
First one if cm9 kernel has it then this one too I didnt looked at every single commit sorry ^^ and second one not at the moment but maybe some times
Madarox said:
Great but am I missing something or the download link isn't available yet ?
Click to expand...
Click to collapse
I added it in this second
I've no access to market! Could you upload the app please ?
pesiran said:
I've no access to market! Could you upload the app please ?
Click to expand...
Click to collapse
See the attachement
But for all the others you should prefer the play store one as it will be updated regulary
The things looks better for our G version thanks to those awesome devs
Enviado desde mi GT-I9100G usando Tapatalk 2
fuss132 said:
First one if cm9 kernel has it then this one too I didnt looked at every single commit sorry ^^ and second one not at the moment but maybe some times
I added it in this second
Click to expand...
Click to collapse
oh...sorry didn't see it was based on CM9 kernel..code says CM9 kernel have those MMC thing disabled so its safe from those brick bug...i assume this kernel also safe because it is based on CM9 kernel...good work buddy...
fuss132 said:
See the attachement
But for all the others you should prefer the play store one as it will be updated regulary
Click to expand...
Click to collapse
Not found Error !
ok,1st problem:I can't turn on wifi...I'm on CM9 RC.
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
philippsp said:
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
Agree, but cpu is stable. Now higher scores in benchies Thanks man, hope you will fix the wifi problem.
wifi cm9 rc1?
fuss, thanks for great work, but there is a problem of wifi in CM9 rc1 does not function
philippsp said:
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
Madarox said:
ok,1st problem:I can't turn on wifi...I'm on CM9 RC.
Click to expand...
Click to collapse
cesco73 said:
fuss, thanks for great work, but there is a problem of wifi in CM9 rc1 does not function
Click to expand...
Click to collapse
Youre all on CM9 right?
I already found the problem fix soon... Your rom needs an updated wlan.ko module Those cm9 roms these days
If you would use aokp it would be working ^^
WIFI is not working on rootbox too !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ARM.
The Next Reliable Managed Architecture.
NOTE
- ARM or Android Reliant Management, Aims to bring full battery saving to our devices and add features not introduced. This would of course reduce battery hunger and at the same time, sustain the performance of our phones.
THIS IS A MODDED Kernel with Many fantastic features within. I am not responsible or credited for the kernel source codes whatsoever. I only modify the kernel to my needs and add more features not available from the base which will be beneficial to all of us. This Kernel is GPL Compliant and is fully Open Source. Please provide a CLEAR Credit should you use this Source as your base.
Click to expand...
Click to collapse
- Undervolted Clock values for more battery life
- Various Tweaks In Kernel
- Optional OC
- Each Clock Speed fully utililises its Voltage
- Powersave Tweaks on various modules
- Dimmer LED Lights for more Energy savings
- Lower Battery Consumption
- Maximised Minimal Brightness ! >v5.10 !
- UnderClocked minimal value to <300MHz
Click to expand...
Click to collapse
Source Code Distribution
Github [CM] - Source
Github [Stock] - Source
===============CHANGELOG=================
Base : CyanogenMod 10
Maintainers : nicholaschw & JaredMLG
v5.06
- Initial Release
v5.11
- Fixed 5.10 Wakelock Bug
v5.11a
- Fixed Issues on Source
- Final Compile for KU Only Source
- Tweaked 200Mhz again
v5.12b
- Changed Source for v30B
- Removed v5.12a Commits
- Compile with v30b Drop commit
v5.2 FINAL
Milestone Codename : EXO
- Fix OPP Segmentation Fault
- Fully implement Smartreflex fixes
- Add Voltage Control for AOKP
- Bump down Vibration
- Added 2012 SIO Scheduler
- Re-added SmartAssV2
- Re-added InteractiveX
- Re-added OndemandX
- Fix SmartAssV2 Lags
NEXT RELEASE : v5.2
Following Release : v5.2a
Click to expand...
Click to collapse
====================
Base: Stock v30B bproj
Maintainer: nicholaschw
NOTE: ALL v0 are not released publicly.
v0.01
- Re-build from bproj source
v0.02
- Switch in toolchain to better fit source
- Fix a few compile errors
v0.03
- Integrate LED 1mA
- Integrate Minimal Brightness
- Cleaned Source
v0.04
- Update 4.4.3 tool chain
- Fix a few flickering LED bugs
- Bump up the value for OPP
- Add 1.1GHz OC
- Reduced Minimal Sleep Clock to bypass minimum limit
NEXT RELEASE : v1
Following Release : v1.1
Click to expand...
Click to collapse
Bugs + CM +
--------
- LED on errors as shown in dmesg (All CM10 versions has this)
- Setting brightness flickers the LEDs
Bugs + STOCK +
--------
- LED on errors as shown in dmesg (All CM10 versions has this)
- Setting brightness flickers the LEDs
-Credits-
CyanogenMod, for providing AND fixing the source codes actively
YOU, Readers, for providing me a place to allow you to give me suggestions
Xonar, For assisting in many parts of the modifications
cyclon, for introducing new modifications
Google, For allowing me to identify whatever errors i face.
> XDA Community, Giving comments on whatevers best for implementations
This Thread is Started due to our previous moderator, Reinbeau who suggested not to re-open the old thread and instead, start a fresh one.
ANY FLAMING OR CRITICISM WILL BE REPORTED.
ARM., Is not to be mistaken with ARM. ARM. Is not related to ARM Whatsoever in terms of name.(We use ARM for our processor, so we are related somehow abit.)
+DO NOT MIRROR+
EVERYTHING IS GOING ACCORDING TO DATE OF RELEASE.
How To Install
- Download the flashable zip below
- Put it into your sdcard (Anywhere you like. Just remember its location)
- Boot into recovery
- Wipe cache, Dalvik Cache (NO NEED TO WIPE DATA UNLESS YOU WANT TO)
- Install the zip package
- Reboot
- Enjoy the Excitement!
Link List - CYANOGENMOD BASED
AVAILABLE ON ROM MANAGER!
ARM-Project-v5.06.zip - 4.68 MB
ARM-Project-v5.10.zip - 4.68 MB
ARM-Project-v5.11.zip - 4.68 MB - *Current Most Stable*
+ Should there be wakelocks, Flash the Official CyanogenMod and then flash the kernel.
+ Flashing on other CyanogenMod-based ROMs are experimental. Always ask in the thread of the ROM whether it works with ARM. . Never attempt anything that fails.
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-Project-v5.10N2.zip - 4.68 MB
ARM-Project-v5.10N3.zip - 4.68 MB
ARM-Project-v5.12b.zip - 4.68 MB
Link List - STOCK BASED
None yet
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
None yet
FAQs
+ Q: Whats the difference?
A: Read the disclaimer.
+ Q: Will I get worse performance than the Official CyanogenMod Kernel?
A: It depends on what commits are added. My Kernel only fixes bugs i can fix and which are unsolved and Of course, I will add more features not available in CyanogenMod Official
+ Q: What makes the stock kernel different?
A: You get goodies, and furthermore, better battery life and performance in this project.
After I flashed your kernel, I noticed Google Now's voice response does not work anymore - English (United States) is set as default.
chuayx1 said:
After I flashed your kernel, I noticed Google Now's voice response does not work anymore - English (United States) is set as default.
Click to expand...
Click to collapse
The point is that CM10 Nightlies dont even have Google Now Working properly. Besides, tell me how Google Now links to the Kernel. What, it needs more power? Note that Google Now may or may not work on each CM10 Build.
Afternoon.
nicholaschw said:
The point is that CM10 Nightlies dont even have Google Now Working properly. Besides, tell me how Google Now links to the Kernel. What, it needs more power? Note that Google Now may or may not work on each CM10 Build.
Click to expand...
Click to collapse
Most of the nightlies have the Google Now working....
@skate4life stop the hate dude, if you don't like Nick's work, just ignore him. Maybe he is crazy maybe he is not, but one crazy in this forum is enough.
sent from my Optimus Black V28c
chuayx1 said:
Most of the nightlies have the Google Now working....
Click to expand...
Click to collapse
I will see to that issue if its related to my kernel. But one thing sure is my kernel stops BLN from working.
Sent from my GT-I9300 using xda app-developers app
chuayx1 said:
Most of the nightlies have the Google Now working....
Click to expand...
Click to collapse
Sry for OT but apparently Google Now voice thingamabob does not work for me and im on stock kernel.Weird cuz the first few nightlies has it working
EDIT: I found a fix,First set your language in the language and input settings to Engish(United States)
then set the language of Google Now to English(US).After that,it should work with or without ARM kernel.Thanks for trying the kernel though...
re4lsk said:
@skate4life stop the hate dude, if you don't like Nick's work, just ignore him. Maybe he is crazy maybe he is not, but one crazy in this forum is enough.
sent from my Optimus Black V28c
Click to expand...
Click to collapse
Because of this I really wonder if this is really a custom kernel or not. *refers to Jellybam thread*.
chuayx1 said:
Because of this I really wonder if this is really a custom kernel or not. *refers to Jellybam thread*.
Click to expand...
Click to collapse
It is because the kernel now has a noticeable feature from CM kernel. It has a dimmer Backlight.
Sent from my GT-I9300 using xda app-developers app
nicholaschw said:
It is because the kernel now has a noticeable feature from CM kernel. It has a dimmer Backlight.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
The dimmer backlight only works fine if you also mod the rom. So i would (like i did) release a rom with kernel.
I have a link somewhere how to do it, someone on xda is the original source for backlight modifications, if you're interested i can send you the diffs for the mod.
cyclon1978 said:
The dimmer backlight only works fine if you also mod the rom. So i would (like i did) release a rom with kernel.
I have a link somewhere how to do it, someone on xda is the original source for backlight modifications, if you're interested i can send you the diffs for the mod.
Click to expand...
Click to collapse
Its better if you inject it into your ROM. That way i do not have to add a ROM into this thread. I told myself to fully work ONLY on kernels and thus this thread will only be purely kernels.
Hope you understand
So, inject my kernel into your ROM if, you want to combine both of our works. You should notice Dark Mod has still a bright backlight,which if you add this, will benefit into a darker environment
...i'm not trying to be pushy or anything, but will there be a chance of OC to 1.3 just like the Zeus Rom??
xX3m0Xx said:
...i'm not trying to be pushy or anything, but will there be a chance of OC to 1.3 just like the Zeus Rom??
Click to expand...
Click to collapse
Yes. Definitely.
Please try this out, Its been tested. I just need to see if Underclocking works to reduce battery drain.
This Nightly has reduced battery drain with 200MHz Underclocking
ARM-Project-v5.10N2.zip - 4.68 MB
nicholaschw said:
Its better if you inject it into your ROM. That way i do not have to add a ROM into this thread. I told myself to fully work ONLY on kernels and thus this thread will only be purely kernels.
Hope you understand
So, inject my kernel into your ROM if, you want to combine both of our works. You should notice Dark Mod has still a bright backlight,which if you add this, will benefit into a darker environment
Click to expand...
Click to collapse
The dark mod sets the brightness in aat2870_bl.c
val = (unsigned char) (level * 0x1F / 255);
val = 0xE0 | val;
aat2870_write_reg(client, AAT2870_REG1, val);
so we set in the register 0XE0 as lowest value for the brightness.
This is according to the aat2870 doku (http://www1.futureelectronics.com/doc/ANALOGICTECH - AATI/AAT2870IUW-DB1.pdf)
the absolute lowest technically possible value for the chip.
So, no, nothing is darker than dark mod
Except you use screen filters, but that wont save battery.
There are some really interesting information about ALS, and other things in the document. You'll realize that the driver is badly written and the hardware is... not assembled as optimal according to the document. lg should have used an additional cheap part of hardware for the als....
nicholaschw said:
Yes. Definitely.
Please try this out, Its been tested. I just need to see if Underclocking works to reduce battery drain.
This Nightly has reduced battery drain with 200MHz Underclocking
ARM-Project-v5.10N2.zip - 4.68 MB
Click to expand...
Click to collapse
After reading your posts history...well, can I trust your words on your developing?
I've flashed this kernel once more, I hope you're really committed and not repeat the same mistakes as said by the others on your previous thread..
All 4 touch LED buttons blue light up when one key is pressed. That's a bug. And if you can make an option somewhere to turn the entire front lights off/on at free will maybe you can try it. It it flickers when it's turned on from standby mode. Also, the screen getting brighter for 1 sec before returning to normal when the screen is turned on from standby mode, maybe that can be fixed too. I'm not a dev, but i'm testing out all.
have set your 200Mhz for underclocking, but I think it's best to leave the 1000Mhz clock frequency for those who don't wish to overclock their device - 900Mhz is what i'm using now, and not everyone might want to be on 1100mhz. just my 2 cents.
nicholaschw said:
ARM-Project-v5.10N2.zip - 4.68 MB
Click to expand...
Click to collapse
One question: what's not working in this? Cause there's just "LED on errors as shown in dmesg (All CM10 versions has this)" in OP... and last time I got SOD...
So I asked.
chuayx1 said:
All 4 touch LED buttons blue light up when one key is pressed. That's a bug. And if you can make an option somewhere to turn the entire front lights off/on at free will maybe you can try it. It it flickers when it's turned on from standby mode. Also, the screen getting brighter for 1 sec before returning to normal when the screen is turned on from standby mode, maybe that can be fixed too. I'm not a dev, but i'm testing out all.
Click to expand...
Click to collapse
... i'm having the same exact problems... hopefully, this will be fixed soon
Sent from my LG-P970 using xda premium
nicholaschw said:
ARM.
The Next Reliable Managed Architecture.
NOTE
- ARM or Android Reliant Management, Aims to bring full battery saving to our devices and add features not introduced. This would of course reduce battery hunger and at the same time, sustain the performance of our phones.
COMPATIBLE WITH (Kernel)
- ALL CyanogenMod 10 Based ROMs
Source Code - Github
Last Commits: 6 December 2012
Screenies
Base : CyanogenMod 10
Maintainer : nicholaschw
v5.06
- Re-Initialized Release
- Initital Public Release
- Reduce both White and Blue LEDs to 1mA
- Added SmartAssV2
- Fixed SmartAssV2 Compiling errors
- Reduce 400MHz clock rate to 300MHz
- Reduce voltages on all clock rates
v5.10 Nightly 1
- Attempted 1.2GHz
v5.10 Nightly 2
- Removed Previous attempt for further OC
- Added 200MHz Underclocking for more battery life
Click to expand...
Click to collapse
Bugs
--------
- LED on errors as shown in dmesg (All CM10 versions has this)
-Credits-
+ CyanogenMod, for providing AND fixing the source codes actively
+ YOU, Readers, for providing me a place to allow you to give me suggestions
+ Xonar, For assisting in many parts of the modifications
+ Google, For allowing me to identify whatever errors i face.
♥ XDA Community, Giving comments on whatevers best for implementations
This Thread is Started due to our previous moderator, Reinbeau who suggested not to re-open the old thread and instead, start a fresh one.
ANY FLAMING OR CRITICISM WILL BE REPORTED.
Click to expand...
Click to collapse
The main theme to use some KERNEL is to get good speed and performance of phone.
After seeing the benchmark in ur post, it looks funny for me.
Bcoz, without using ur Kernel, I am getting the same or above benchmark of CM10 ROM, then why to use ur Kernel ?
Click to expand...
Click to collapse
THIS IS FOR UNLOCKED BOOTLOADER ONLY!!!
Credits
@FXP @Kali- @codeworkx @binary for all the work on the hardware bringup for yuga
@cdesai @Entropy512 @championswimmer for their work on the device tree
FreeXperia team
CyanogenMod team
TWRP team
@faux123 for using a lot of his features
@DooMLoRD for using some of his sources.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
All the functionality of the great CM/FXP kernel! Thanks a lot to them, who made this all possible!
Includes TWRP 2.6.3.0 recovery
Updated GAMMA settings for the screen for more realistic colours
Sweep 2 Wake
Doubletap 2 Wake
Proper and stable CPU overclocking upto 1836 MHz
Proper and stable GPU overclocking upto 627 MHz
CPU & GPU voltage control
Undervolt for better battery life
Intelli thermal module to prevent heat of device
Hotplug msm_mpdecision
Extra CPU governors: wheatly and intellidemand
Extra GPU governor: simple
Extra I/O scheduler: row
Fast charging
Fast charging for unkown (cheaper) chargers
Faux Sound 3.0 support
More smoothness by misc. tweaks
UPCOMING FEATURES:
Dual Recovery
..........
BOOTLOGO:
COMPATIBILITY:
This kernel is currently compatible with the following 4.3 ROMS (only MEOW-kernel_v1.11.13-yuga.zip and LOWER versions)
PAC-rom (recommended, confirmed)
ChameleonOS (confirmed)
CM 10.2 (confirmed)
Carbon (confirmed)
Asylum ROM (confirmed)
CyanX (confirmed)
JellyBam (confirmed)
MoKee Open Source (confirmed)
Vanir AOSP (confirmed)
Omnirom (confirmed)
All ROM's that are based on CM10.2
Not working on
pabx's 4.3 rom
This kernel is currently compatible with the following 4.4 ROMS (only MEOW-kernel.v1.11.27-kitkat-yuga.zip and HIGHER versions)
PAC-rom (recommended, confirmed)
Beanstalk (confirmed)
Omnirom (confirmed)
All ROM's that are based on CM11
DOWNLOAD:
http://forum.xda-developers.com/devdb/project/?id=666#downloads
INSTALLATION:
1. Download the .zip and save it to your sdcard
2. Reboot phone to recovery
3. Flash the .zip from your sdcard
4. Laugh because of the installation images
5. Make loud MEOW sounds
6. Calm down your neighbourhood
4. Reboot and enjoy
if you like my stuff, you are welcome to donate a beer or a coffee via PayPal or Bank
SOURCES:
https://github.com/MEOW-kernel/android_kernel_sony_apq8064
Seperate commits of squashed commit:
https://github.com/jeroenqui/android_kernel_sony_apq8064
XDA:DevDB Information
MEOW-kernel (For CM10.2/CM11-based ROMS), Kernel for the Sony Xperia Z
Contributors
jeroenqui
Kernel Special Features:
Version Information
Status: Testing
Created 2013-09-17
Last Updated 2014-07-15
Changelog
0504:
Enabled all features again
0429:
Good old MEOW-kernel logo is back
Temp. switched to CWM instead of TWRP
Should be compatible with new builds of PAC, CM11, Beanstalk and OmniROM (and probably more, please report)
Please report if you experience lag
0204:
New kernel base
Better compatibility with other ROMS
Fixed sweep2wake and dt2wake
Small improvements
1217:
Tested on Beanstalk and Omnirom (please report other working/not working)
Should be compatible with CM & AOSP based 4.4.x ROMS
WiFi prima drivers: update to 3.2.7.13
Small fixes & improvements
1127:
All features ported to Android 4.4 kitkat
ONLY for Android 4.4 AOSP based ROMS
1113:
Misc. small fixes and improvements
Should solve incompatibility problems with other CM10.2 based ROMs
Compatible with CM10.2 based ROMs built AFTER October 15
1027:
Added GPU overclock to max. 627 MHz
Added GPU voltage control
Update WiFi prima driver to 3.2.6.121
Sweep2Wake & Doubletap2Wake fixes
Implement conservative scaling policy
Fix pop noise seen with touch tone during playback
Show LTE instead of 4G
Update SELinux policies for WLAN
Camera: Video HDR
Camera: disable verbose logging
Enable frequency synchronization on thread migration
Misc. cleanups and improvements
1013:
Added torch overlay
Fix crash during network selection
Adjust bandwidth parameters (fix screen flickering)
WiFi Prima driver update to 3.2.6.113
Switch to Sony Illumination service for notification lights
1004:
Modified default voltages for better stability
Should solve problems with the ROM not booting for some people
1001:
New bootlogo !!! (tnx @domicq)
Increased speed during installation
Added msm_mpdecision hotplug binary (better battery life + performance)
Proper and stable overclock up to 1836MHz !!!
0930:
Updated GAMMA settings for the screen for more realistic colours (let us know if you all like it)
Fixed screen freeze while Sweep2Wake and DoubleTap2Wake are on
Intelli-thermal is now controllable via Trickster Mod
Removed 192 MHz CPU clock speed (the processor has a lowest clock of 384 MHz (hardware limit), so there is no use for it)
Set default min CPU clock to 384 MHz and default max CPU clock to 1512 MHz
Minor GPU/USB/Wireless/sound driver updates/fixes
0921:
Sweep 2 Wake (use 2 fingers to scroll from top to bottom to wake the device when screen is off)
Doubletap 2 Wake and Sweep 2 Wake are controllable via Trickster Mod
0920:
DoubleTap 2 Wake (huge thanks to @alnikki25k)
Merge of Sony release 10.3.1.A.2.67
Several small fixes
0917:
- First release of MEOW-kernel
FAQ
Frequently Asked Questions will be added here soon.
Finally the first flashable AOSP kernel for XZ
flashing it....
thanks mate...
was gonna build a kernel myself....with sources from doomkernel as i hated not being able to overclock and stuff..... thanx..... also do think about overclocking the GPU....
thanks anyways
rohit25 said:
flashing it....
thanks mate...
was gonna build a kernel myself....with sources from doomkernel as i hated not being able to overclock and stuff..... thanx..... also do think about overclocking the GPU....
thanks anyways
Click to expand...
Click to collapse
Yea, I will add GPU overclock to the list.
Sent from my C6603 using Tapatalk 4
I need to cm10.1.3RC2. will this kernel work on it??
C.Eduardo said:
I need to cm10.1.3RC2. will this kernel work on it??
Click to expand...
Click to collapse
No, only works on CM10.2 (based) and AOSP 4.3 (based) ROMS.
Flashed on Asylum ROM. Its working as it should....thanks for your work
Sent from my C6603 using XDA Premium 4 mobile app
golfgtiedition30 said:
Flashed on Asylum ROM. Its working as it should....thanks for your work
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
If I'm honest I like the current one. But out of the two images above I like number 2
Sent from my C6603 using XDA Premium 4 mobile app
Yeah, No. 2 looks great! :thumbup:
Gesendet von meinem C6603 mit Tapatalk 4
jeroenqui said:
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
Click to expand...
Click to collapse
Alt 2 looks really nice, better than the current one.
Sent from my C6603 using Tapatalk 4
jeroenqui said:
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
Click to expand...
Click to collapse
Definitely the 2nd one
i wanna try it on FXP 10.2 builts . with this kernel I can skip the fastboot kernel flashing method, can't I?
highKo said:
i wanna try it on FXP 10.2 builts . with this kernel I can skip the fastboot kernel flashing method, can't I?
Click to expand...
Click to collapse
It depends if you already have CWM or TWRP recovery installed. If you have, you shouldn't need to flash via fastboot.
jeroenqui said:
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
Click to expand...
Click to collapse
I like more no 1.
jeroenqui said:
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
Click to expand...
Click to collapse
Number 1 is much better, thanks for your effort!
will it be possible to implement the double tap to wake feature?
leongzxc said:
will it be possible to implement the double tap to wake feature?
Click to expand...
Click to collapse
I'm already working on that It's pretty hard, because I have to modify the touchscreen driver to support that.
But I'm making good progress and I hope to include it in the next version.
Moretz Kernel 0.2.2 - Galaxy Note 8.0 EditionGT-N5110 & GT-N5100
Features:
Linux 3.0.101
Frandom
Network speed enhancements
Dynamic read ahead
CPU OC to 1.8GHz
GPU OC to 533MHz
CPU Voltage Control (OV/UV)
Tuned ZZMoove CPU governor (removed all other governors)
Intelligent CPU core hot plugging
Touchboost control, set to 800MHz
ARM CPU topology
LCD frequency switching (40Hz on screen dim, 60Hz on active)
Intelligent GPU scaling (Mali GPU control)
Lots of other fixes/tweaks
Intelligent zipalign at boot (init.d)
Intelligent sql db optimization at boot (init.d)
So, what's so special here?
A few things actually. I grabbed various code bits from many well known developers and worked some of my own magic on this build. First, I bumped the kernel up to 3.0.101 (FINAL) form kernel.org as a base on top of the stock CM 11.0 kernel. Once I pushed all of the enhancements listed above, I focused on tuning ZZMoove to balance performance and battery. I believe I've succeeded in that realm, so all other governors have been removed. This is a flash and forget kernel package. That's what makes it special ... the users do not have to do any tuning, it works, and it works well.
Credits:
Faux123, Andy P, googyanas, psndna88, ryukuri, sbrissen, Cyanogenmod team and may others. Please let me know if I missed you.
Source Code:
https://bitbucket.org/carvsdriver/android_kernel_samsung_smdk4412 (Moretz-New Branch)
Standard Disclaimer:
By flashing this you hold the developer (car vs driver) and anyone else not responsible or liable for any damage to your device, up to and including hard bricking. Basically, there's no warranty - flash at your own risk.
This release is not affiliated to CyanogenMod or Cyanogen Inc. This is my own personal work with lots of kangs from others.
This was tested with CM-11 on a GT-N5110 device. Any other devices or ROMs may not work or exhibit poor behavior. That being said, I only support use of this kernel with CM-11 and the GT-N5110.
Requirements:
Device - Samsung GT-N5110
ROM - CyanogenMod 11.0
XDA:DevDB Information
Moretz Kernel - Galaxy Note 8 Edition (N5110 & N5100), Kernel for the Samsung Galaxy Note 8.0
Contributors
car vs driver, psndna88, faux123, googyanas, AndiP, sbrissen
Kernel Special Features: GPU/CPU OC, UV/OV, UKSM, HotPlug, ARM Topology, LCD Freq Scaling, Linux 3.0.101
Version Information
Status: Stable
Current Stable Version: 0.2A
Stable Release Date: 2014-03-21
Created 2014-03-21
Last Updated 2014-07-03
Change Log:
Moretz 0.2.2 -- Upstream CM11.0 Changes Merged -- 7.4.2014
98865a3: n_tty: Fix n_tty_write crash when echoing in raw mode
7735075: mc1n2: Allow swapping of microphone ADC channels
ed8b659: smdk4412: update sound soc and codecs
5e96596: d710: build stage2 initramfs into kernel
8a5d38c: Fix CVE-2014-3153
6922ae0: Merge "synaptics_s7301: add disabling keypad" into cm-11.0
daf9635: Merge "smdk4412: cypress-touchkey - add keydisabler" into cm-11.0
fd94358: n_tty: Fix n_tty_write crash when echoing in raw mode
969b384: mc1n2: Allow swapping of microphone ADC channels
eba4e20: smdk4412: update sound soc and codecs
Moretz 0.2.1 -- Upstream CM11.0 Changes Merged -- 4.8.2014
c0dce37: dm crypt: optionally support discard requests
15b6c83: dm table: share target argument parsing functions
1886fef: dm: ignore merge_bvec for snapshots when safe
2b791d9: dm: suppress endian warnings
Moretz 0.2a -- Initial Release -- 3.21.2014
Instructions:
1. Download the flashable zip
2. Reboot into recovery
3. Flash the zip
4. Reboot
5. Done
I like to make things simple. Let your device boot up and that's it. No configuration necessary. But, if you want to screw with the CPU governor and ZZMoove settings, I made that easy for you. Just edit the zzmoove file in your init.d directory with the settings you want and reboot.
Click to expand...
Click to collapse
Code:
[CENTER][SIZE="5"][COLOR="Magenta"][B]GT-N5110 Download link:[/B][/COLOR][/SIZE]
[url]http://d-h.st/Gkd[/url]
[B]Version[/B]: Moretz-0.2.2
[/CENTER]
Code:
[CENTER]
[SIZE="5"][B][COLOR="magenta"]GT-N5100 Download link:[/COLOR][/B][/SIZE]
[url]http://d-h.st/ZyZ[/url]
[B]Version[/B]: Moretz-0.2.2
[/center]
Just a couple more things ...
Please do not post mirrors, if one is needed just let me know and I'll post one.
Please leave a review on this project by clicking here.
If you like my work, feel free to buy me a beer or pack of guitar strings by donating.
Click to expand...
Click to collapse
[/CENTER]
How to properly report bugs:
When reporting a bug, you must provide me with some very specific information so that I am able to either reproduce the problem or diagnose it based on logs. If you cannot provide information that I need, I cannot attempt fix the issue.
If the device is crashing:
Please make a copy of your last_kmsg immediately after rebooting the device.
Please make a copy of your logcat for the subsequent reboot.
Attach both files to your bug report and specifically state exactly what happens (are there steps to reproduce it?).
In all cases, please provide a logcat of when the issue occurs or specifically describe what is happening and how you can reproduce the error.
If you have any current issues prior to flashing my kernel, don't expect me to fix them.
The more detail you provide, the more helpful your bug report will be for me.
Feature Requests:
I'll make this one easy, I don't do feature requests. I used to do that, it became a real pain in the ass to keep everyone happy and the project I was working on bug free. Put simply, I put this together to work specifically for me and then decided to share it here. If at some point I decide to add new features, then I'll release new versions to you.
car vs driver said:
Reserved just in case.
Click to expand...
Click to collapse
I'm looking into building my own kernel for the konawifi because I feel like we need more kernel options, so thank you for this awesome customized kernel.
ztotherad said:
I'm looking into building my own kernel for the konawifi because I feel like we need more kernel options, so thank you for this awesome customized kernel.
Click to expand...
Click to collapse
You're welcome, that's what this one is for. Makes the device scream and battery life is excellent.
Sent from my Nexus 5 using XDA Premium 4 mobile app
car vs driver said:
You're welcome, that's what this one is for. Makes the device scream and battery life is excellent.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
freakin' nice. definitely can't wait then! thanks again for your awesome gift to the Note 8.0 family.
is n5100 model will be supported in next future ?
messi2050 said:
is n5100 model will be supported in next future ?
Click to expand...
Click to collapse
Would you be willing to test? Only reason I didn't publish for n5100 is because I don't have one to verify that I didn't break anything.
I just have to update a few configs and run a new build, let me know.
as an owner of the n5100 I´ll be very interested in your work. so my first question - will this kernel work with probam 1.3.2? maybe I could test it
redukt said:
as an owner of the n5100 I´ll be very interested in your work. so my first question - will this kernel work with probam 1.3.2? maybe I could test it
Click to expand...
Click to collapse
I suppose it should, I did a quick check and looks like that ROM uses the same base 3.0.y kernel that CM 11.0 does. The partition scheme on the devices is the same too (both devices us /dev/block/mmcblk0p5 for the boot partition) ...
There's only one real way to find out though, someone has to flash it - worst case is that it doesn't boot up.
Go ahead and give this a rip and let me know how it goes. It's the same build as the OP with the 5100 defconfig updated to include the features that I added for the 5110.
Download:
REMOVED ... SEE OP FOR DOWNLOADS
MD5:
7864a8e5eb18321c2201cba314fc7a06
If it doesn't boot, just reflash your previous ROM - that'll replace this kernel with whatever one is included there.
Yeah, kernel runs nice So I`ll kept my device on standby, make a wow raid and check the battery stats
Thx for your hard work
Assuming all goes well, I'll update the op to state that both devices are supported and working.
Sent from my Nexus 5 using XDA Premium 4 mobile app
car vs driver said:
Would you be willing to test? Only reason I didn't publish for n5100 is because I don't have one to verify that I didn't break anything.
I just have to update a few configs and run a new build, let me know.
Click to expand...
Click to collapse
i'm using original rom 4.1.2 now so i can't test it sorry
3,5 h standby time loosing NOTHING in battery percentage - full 100% So I`ll check this tomorrow and report my results
edit: very nice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
edit: bug: no 3g network :/
Hmmm ... no 3G? Y'know what, I think I know why. I'll post another build for you to test in a bit.
Edit: @redukt .... give this one a rip: <EDIT>SEE OP FOR DOWNLOADS.</EDIT>
car vs driver said:
give this one a rip:]
Click to expand...
Click to collapse
3G runs now
Many thanks for your quick reply
Excellent. I'm going to update the OP and support both devices then. Thanks for the quick turn around with testing, I appreciate it.
does anybody tested it on AOSB rom?
lolek2382 said:
does anybody tested it on AOSB rom?
Click to expand...
Click to collapse
yeppp, runs with AOSB 1.3.2
car vs driver said:
Hmmm ... no 3G? Y'know what, I think I know why. I'll post another build for you to test in a bit.
Edit: @redukt .... give this one a rip: <EDIT>SEE OP FOR DOWNLOADS.</EDIT>
Click to expand...
Click to collapse
3G is working on my N5100 did I download the updated file just install a few minutes ago oh thankyou for supporting our tab the the Devs on the the better
brisK Kernel
brisK is a KitKat kernel for stock-based ROMs for the Samsung Galaxy S4 mini LTE (GT-I9195).
It aims to be faster and more a bit more battery-friendly than the stock kernel, while retaining its stability.
To prevent bloat I will only apply useful features like BLN. Adding 10 random governors and schedulers is not useful in my eyes, and is also not the goal of this kernel.
Goals
Stability: The original Samsung kernel is stable, so let's not go too far away from it. This kernel doesn't need bleeding edge code - it just works(TM).
Efficiency: Less power consumption by faster computation.
Battery: A battery drain patch is included, which is not in Samsungs original code.
Speed: Minor changes, for example: Trade some screen smoothness for less kernel overhead. Should not be noticeable, though. Also lowers power consumption slightly.
Changelog
v6 (brisk_kk-stock_2015-07-28_15-07-08_64d9234.zip)
Removed more KNOX stuff (--> This fixed some random reboots!)
Finally upgraded to new toolchain: Linaro GCC 4.9.4-2015.06 (Cortex-A15)
Thanks @impactor and @SilviuMik for providing help!
v5
Revert default IO scheduler back to CFQ
Apply changes from new released kernel source (GT-I9195_EUR_KK_Opensource.zip - I9195XXUCOA2)
Apply changes from new released kernel source (GT-I9195_EUR_KK_Opensource.zip - I9195XXUCOE4)
Older versions
v4
Fixed USB-to-PC problems by re-enabling some debugging code
v3
Users reported: USB-to-PC (MTP) doesn't work? (Logfiles appreciated)
Apply changes from Samsungs GT-I9195_EUR_KK_Opensource_Update1.zip
Replace stock Wlan module with kk_2.7_rb1.43
Various kernel config changes:
Disable various unused and debugging features
Re-enable heap randomization
Enable "Optimize very unlikely/likely branches"
Set default IO scheduler to noop
Reduce preemption from "Low-latency desktop" to "Desktop"
Disable Samsungs Rooting Restriction
Added init.d support
v2
Added OTG support (UNTESTED) - Edit: NOT WORKING YET
Removed TIMA
Change to XZ compression
Add BLN support (UNTESTED) - Edit: NOT WORKING YET
v1
Added battery drain patches
Optimize kernel for speed, not size
Preparation for init.d support
Permissive SELinux
Future plans
Add proper Prima WLAN driver - Done!
Add a few more optimizations - Done!
Add init.d - Done!
JellyBean Kernel
The old JellyBean kernel is no longer maintained, but it is stable and its uptime was above 2000 hours on my device. I published it here too, in case someone is happy with their JellyBean ROM and wants this.
Features: BLN, Battery drain patches, kernel config optimized, most debugging code deactivated
Source: https://github.com/TheBootloader/android_kernel_samsung_msm8930-common/tree/jb-stock
Awesome people
@SilviuMik for helping me getting started and providing useful tips - You rock!
@Christopher83 for his toolchains
@F4k for providing source code where I can snoop around
@junkyde for his kernel and his OTG and BLN patches
@arco68 for being another great resource
Downloads & Sources
Source code is on my GitHub.
Releases are at the bottom of this post and on GitHub.
See 2nd post if you need checksums.
PLEASE MAKE FULL BACKUP (/system TOO!) BEFORE FLASHING ANYTHING. The strangest things can happen if you don't have a backup - even if it *should* work.
Downloads are ordered from oldest to newest, so the newest release is at the bottom.
Checksums
brisK JB (brisk_jb_2014-05-16_16-40-39.zip)
MD5: 0f916929e85ae1f8d7b2d1aa8c4e5e1f
SHA256: 8cb1b01358eeb6bc7fb68bbb2fd641d5cda852b78d7e22605ffb28eba6da4156
brisK KK v1 (brisk_kk_2014-08-19_17-33-50_cd36751.zip)
MD5: 8edf28d8a2d1d89d40f8a8f1863d7b57
SHA256: aed1caf0d13ada04888e7c3a020fa6b679fc0fc36ad89678e617ae9a36d637e6
brisK KK v2 (brisk_kk-stock_2014-08-21_01-04-03_765f3f6.zip)
MD5: c004e49779f21f706e76a00233f8fb80
SHA256: df57729a66d425a970d8c8ef222edf6073e4cfc562d8dccea96f12ac0eac7aef
brisK KK v3 (brisk_kk-stock_2014-12-07_00-57-00_23da34c.zip)
MD5: d64b2c7049339eaed9d14bafdc8a9ee3
SHA256: 47741a492077d3e385e120c3596bf6df63426930fffcaa7aa84c924ff43fee91
brisK KK v4 (brisk_kk-stock_2014-12-07_15-31-03_1091455.zip)
MD5: d5fb48434fe9a206a9544968081ee654
SHA256: 122189fb11068be07e6d24cbe179ed57a9872944664e028d0d288fcf804ea4d2
brisK KK v5 (brisk_kk-stock_2015-07-23_23-57-24_518a15c.zip)
MD5: 2a5086c1354e6f475d73b77b41bcfe40
SHA256: 7dce6a173c9e6ddf6f573c802cc8aea7900239a2253ca31722e651e791bb6e6e
brisK KK v6 (brisk_kk-stock_2015-07-28_15-07-08_64d9234.zip)
MD5: 567d7e6ea8762559d218bb092c4cdac4
SHA256: b5b3b41fa7ed10210e4964fa2cd98d14d4572a30b68f7b939e945a3458063a43
Samsungs stock JellyBean Kernel (samsung_jb.zip)
Description: Reverts all changes made by brisK JB by overwriting it with Samsungs original JB kernel (extracted from I9195XXUBML4).
MD5: 388336cec2e9686e258985d0dded0dc9
SHA256: 35777926edee3558208175d5359ef1c466dc3d4dbb1276e233f6727d64b83aa3
Samsungs stock KitKat Kernel (samsung_kk2.zip)
Description: Reverts all changes made by brisK KK by overwriting it with Samsungs original KK kernel and files (extracted from I9195XXUCNE6).
MD5: c71112214620a50841731f4899dd2ca2
SHA256: d2d70f212ee898cf1cedef2d84b3e6345e2388a13579a7112181a254a2c2f3de
Installing
To flash any of these zip-files, you need to install a custom recovery on your phone. (For example: http://forum.xda-developers.com/showthread.php?t=2364980 )
Put zip file on your phone or on its microSD
Boot into recovery: Hold "Volume UP", "Home Button", and "Power Button" when it is off or rebooting
MAKE A FULL BACKUP BY USING THE BACKUP-MENU
Select "Install from zip" or something similar
Navigate to your zip file, select it, and flash it
Reboot your phone
Uninstalling
If you want to go back to Samsungs stock kernel or flash another kernel, you need to install "samsung_jb.zip" or "samsung_kk.zip" first.
brisK uses custom kernel modules. When you run on brisK and then directly install another custom kernel which has no custom modules, you will probably experience issues with WLAN and other stuff. To solve this, flash "samsung_jb.zip" or "samsung_kk.zip" (which flashes the stock modules), and THEN flash whatever custom kernel you want. - Of course you do NOT need to do this if you update to a newer version of brisK.
thank !
GREAT !!!
but for governors and schedulers , i agree with you in half ... but "few" of them are very useful !
what do you think about the recent "zen" ...or "row" ( by default in all customs like cyanogenmod ) ?
for you ,what are the "best" (more adapted ) for better compromise in performance/baterry save ?
why you don't add just 1 or 2 among the best of ones ?
Now running on brisK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Loulou-13 said:
but for governors and schedulers , i agree with you in half ... but "few" of them are very useful !
Click to expand...
Click to collapse
I agree that some governors might actually improve performance, but there isn't much information available, some people say governor A is better, some say B is best...
But also: Kernel goal nr. 1 is stability, and ondemand is well tested. That's why I probably won't add any new governor before testing them a lot.
Can you suggest any governors? And do you have proof or URLs why they are better? Thanks!
If you want more features, more governors, etc, f4k will probably release a stock kernel soon. So keep an eye out for that!
Loulou-13 said:
what do you think about the recent "zen" ...or "row" ( by default in all customs like cyanogenmod ) ?
for you ,what are the "best" (more adapted ) for better compromise in performance/baterry save ?
why you don't add just 1 or 2 among the best of ones ?
Click to expand...
Click to collapse
Zen: I don't know what this does different than other schedulers, I have to read about this first.
I considered "row" when I had an Evo 3D, but I didn't notice a difference between "noop" and "row" in normal daily usage, so I'm not sure yet if I will include it or not - needs more testing.
ladislav.heller said:
Now running on brisK
Click to expand...
Click to collapse
Awesome!
If you have any problems, please report them here. And if you don't have any problems at all, please report that here too!
TheBootloader said:
I agree that some governors might actually improve performance, but there isn't much information available, some people governor A is better, some say B is best...
But also: Kernel goal nr. 1 is stability, and ondemand is well tested. That's why I probably won't add any new governor before testing them a lot.
Can you suggest any governors? And do you have proof or URLs why they are better? Thank!
If you want more features, more governors, etc, f4k will probably release a stock kernel soon. So keep an eye out for that!
Zen: I don't know what this does different than other schedulers, I have to read about this first.
I considered "row" when I had an Evo 3D, but I didn't notice a difference between "noop" and "row" in normal daily usage, so I'm not sure yet if I will include it or not - needs more testing.
Click to expand...
Click to collapse
Same thinking as me ...
ondemand for CPU Gov / No-op for I/O sched , they work great and don`t cause problems
SilviuMik said:
Same thinking as me ...
ondemand for CPU Gov / No-op for I/O sched , they work great and don`t cause problems
Click to expand...
Click to collapse
Yes, my experience too!
Although, when I copy big files with "noop", android freezes for the duration of the copy process. That's the nature of "noop", but "row" might actually fix that. But then again: I rarely need to copy big files, so "noop" is okay for now.
TheBootloader said:
Awesome!
If you have any problems, please report them here. And if you don't have any problems at all, please report that here too!
Click to expand...
Click to collapse
No problems, everything works well.
Please add support for USB Host with additional power supply, is very necessary !!!!
killov1982 said:
Please add support for USB Host with additional power supply, is very necessary !!!!
Click to expand...
Click to collapse
+1 for USB OTG support.
Working good so far
Thanks
TheBootloader said:
Yes, my experience too!
Although, when I copy big files with "noop", android freezes for the duration of the copy process. That's the nature of "noop", but "row" might actually fix that. But then again: I rarely need to copy big files, so "noop" is okay for now.
Click to expand...
Click to collapse
NOOP hangs in general when the read/write task becomes too intensive. Consider CFQ if you're going to do a bit write operation, else ROW is better. That my two cent when I tried on my S3 with Boffela kernel.
PS. ZEN hangs even worse than NOOP.
ladislav.heller said:
+1 for USB OTG support.
Click to expand...
Click to collapse
I second that
thank for your work...
is your kernel working with old knox-free bootloaders like Silviumik's kernel?
thanks
battery life compared with carbon 4.4.4 ? PLEASE
s.goten said:
thank for your work...
is your kernel working with old knox-free bootloaders like Silviumik's kernel?
thanks
Click to expand...
Click to collapse
For now i think no, because he did not remove Knox reference from source, i could be wrong tho !
I just released a new version!
A lot people asked for OTG, so here you go! I added OTG and BLN (untested!!!), thanks to junkyDE!
The highest kernel goal is stability, but I don't have time to test these features right now - maybe I can do one quick emergency fix tomorrow if something breaks, but after that I will probably not respond for 2 weeks or more.
So, have fun and enjoy!
brisK v2
Added OTG support (UNTESTED)
Removed TIMA
Change to XZ compression
Add BLN support (UNTESTED)
-----
s.goten said:
thank for your work... is your kernel working with old knox-free bootloaders like Silviumik's kernel?
Click to expand...
Click to collapse
SilviuMik said:
For now i think no, because he did not remove Knox reference from source, i could be wrong tho !
Click to expand...
Click to collapse
I removed TIMA in brisK v2, so.... it -should- work now right?
If it doesn't boot, just restore your boot partition from a backup or re-flash your previous kernel if you had any.
-----
TNCS said:
NOOP hangs in general when the read/write task becomes too intensive. Consider CFQ if you're going to do a bit write operation, else ROW is better. That my two cent when I tried on my S3 with Boffela kernel. PS. ZEN hangs even worse than NOOP.
Click to expand...
Click to collapse
Thanks a lot for your input! Now I know I don't need to consider ZEN, and will stay with NOOP, and aim for ROW when I have time to add it.
I9192?
Sent from my GT-I9192 using XDA Premium 4 mobile app
SilviuMik made a 9192 kernel:
http://forum.xda-developers.com/showthread.php?t=2592308