THIS IS FOR UNLOCKED BOOTLOADER ONLY!!!
Credits
@FXP @Kali- @codeworkx @binary for all the work on the hardware bringup for yuga
@cdesai @Entropy512 @championswimmer for their work on the device tree
FreeXperia team
CyanogenMod team
TWRP team
@faux123 for using a lot of his features
@DooMLoRD for using some of his sources.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
All the functionality of the great CM/FXP kernel! Thanks a lot to them, who made this all possible!
Includes TWRP 2.6.3.0 recovery
Updated GAMMA settings for the screen for more realistic colours
Sweep 2 Wake
Doubletap 2 Wake
Proper and stable CPU overclocking upto 1836 MHz
Proper and stable GPU overclocking upto 627 MHz
CPU & GPU voltage control
Undervolt for better battery life
Intelli thermal module to prevent heat of device
Hotplug msm_mpdecision
Extra CPU governors: wheatly and intellidemand
Extra GPU governor: simple
Extra I/O scheduler: row
Fast charging
Fast charging for unkown (cheaper) chargers
Faux Sound 3.0 support
More smoothness by misc. tweaks
UPCOMING FEATURES:
Dual Recovery
..........
BOOTLOGO:
COMPATIBILITY:
This kernel is currently compatible with the following 4.3 ROMS (only MEOW-kernel_v1.11.13-yuga.zip and LOWER versions)
PAC-rom (recommended, confirmed)
ChameleonOS (confirmed)
CM 10.2 (confirmed)
Carbon (confirmed)
Asylum ROM (confirmed)
CyanX (confirmed)
JellyBam (confirmed)
MoKee Open Source (confirmed)
Vanir AOSP (confirmed)
Omnirom (confirmed)
All ROM's that are based on CM10.2
Not working on
pabx's 4.3 rom
This kernel is currently compatible with the following 4.4 ROMS (only MEOW-kernel.v1.11.27-kitkat-yuga.zip and HIGHER versions)
PAC-rom (recommended, confirmed)
Beanstalk (confirmed)
Omnirom (confirmed)
All ROM's that are based on CM11
DOWNLOAD:
http://forum.xda-developers.com/devdb/project/?id=666#downloads
INSTALLATION:
1. Download the .zip and save it to your sdcard
2. Reboot phone to recovery
3. Flash the .zip from your sdcard
4. Laugh because of the installation images
5. Make loud MEOW sounds
6. Calm down your neighbourhood
4. Reboot and enjoy
if you like my stuff, you are welcome to donate a beer or a coffee via PayPal or Bank
SOURCES:
https://github.com/MEOW-kernel/android_kernel_sony_apq8064
Seperate commits of squashed commit:
https://github.com/jeroenqui/android_kernel_sony_apq8064
XDA:DevDB Information
MEOW-kernel (For CM10.2/CM11-based ROMS), Kernel for the Sony Xperia Z
Contributors
jeroenqui
Kernel Special Features:
Version Information
Status: Testing
Created 2013-09-17
Last Updated 2014-07-15
Changelog
0504:
Enabled all features again
0429:
Good old MEOW-kernel logo is back
Temp. switched to CWM instead of TWRP
Should be compatible with new builds of PAC, CM11, Beanstalk and OmniROM (and probably more, please report)
Please report if you experience lag
0204:
New kernel base
Better compatibility with other ROMS
Fixed sweep2wake and dt2wake
Small improvements
1217:
Tested on Beanstalk and Omnirom (please report other working/not working)
Should be compatible with CM & AOSP based 4.4.x ROMS
WiFi prima drivers: update to 3.2.7.13
Small fixes & improvements
1127:
All features ported to Android 4.4 kitkat
ONLY for Android 4.4 AOSP based ROMS
1113:
Misc. small fixes and improvements
Should solve incompatibility problems with other CM10.2 based ROMs
Compatible with CM10.2 based ROMs built AFTER October 15
1027:
Added GPU overclock to max. 627 MHz
Added GPU voltage control
Update WiFi prima driver to 3.2.6.121
Sweep2Wake & Doubletap2Wake fixes
Implement conservative scaling policy
Fix pop noise seen with touch tone during playback
Show LTE instead of 4G
Update SELinux policies for WLAN
Camera: Video HDR
Camera: disable verbose logging
Enable frequency synchronization on thread migration
Misc. cleanups and improvements
1013:
Added torch overlay
Fix crash during network selection
Adjust bandwidth parameters (fix screen flickering)
WiFi Prima driver update to 3.2.6.113
Switch to Sony Illumination service for notification lights
1004:
Modified default voltages for better stability
Should solve problems with the ROM not booting for some people
1001:
New bootlogo !!! (tnx @domicq)
Increased speed during installation
Added msm_mpdecision hotplug binary (better battery life + performance)
Proper and stable overclock up to 1836MHz !!!
0930:
Updated GAMMA settings for the screen for more realistic colours (let us know if you all like it)
Fixed screen freeze while Sweep2Wake and DoubleTap2Wake are on
Intelli-thermal is now controllable via Trickster Mod
Removed 192 MHz CPU clock speed (the processor has a lowest clock of 384 MHz (hardware limit), so there is no use for it)
Set default min CPU clock to 384 MHz and default max CPU clock to 1512 MHz
Minor GPU/USB/Wireless/sound driver updates/fixes
0921:
Sweep 2 Wake (use 2 fingers to scroll from top to bottom to wake the device when screen is off)
Doubletap 2 Wake and Sweep 2 Wake are controllable via Trickster Mod
0920:
DoubleTap 2 Wake (huge thanks to @alnikki25k)
Merge of Sony release 10.3.1.A.2.67
Several small fixes
0917:
- First release of MEOW-kernel
FAQ
Frequently Asked Questions will be added here soon.
Finally the first flashable AOSP kernel for XZ
flashing it....
thanks mate...
was gonna build a kernel myself....with sources from doomkernel as i hated not being able to overclock and stuff..... thanx..... also do think about overclocking the GPU....
thanks anyways
rohit25 said:
flashing it....
thanks mate...
was gonna build a kernel myself....with sources from doomkernel as i hated not being able to overclock and stuff..... thanx..... also do think about overclocking the GPU....
thanks anyways
Click to expand...
Click to collapse
Yea, I will add GPU overclock to the list.
Sent from my C6603 using Tapatalk 4
I need to cm10.1.3RC2. will this kernel work on it??
C.Eduardo said:
I need to cm10.1.3RC2. will this kernel work on it??
Click to expand...
Click to collapse
No, only works on CM10.2 (based) and AOSP 4.3 (based) ROMS.
Flashed on Asylum ROM. Its working as it should....thanks for your work
Sent from my C6603 using XDA Premium 4 mobile app
golfgtiedition30 said:
Flashed on Asylum ROM. Its working as it should....thanks for your work
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
If I'm honest I like the current one. But out of the two images above I like number 2
Sent from my C6603 using XDA Premium 4 mobile app
Yeah, No. 2 looks great! :thumbup:
Gesendet von meinem C6603 mit Tapatalk 4
jeroenqui said:
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
Click to expand...
Click to collapse
Alt 2 looks really nice, better than the current one.
Sent from my C6603 using Tapatalk 4
jeroenqui said:
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
Click to expand...
Click to collapse
Definitely the 2nd one
i wanna try it on FXP 10.2 builts . with this kernel I can skip the fastboot kernel flashing method, can't I?
highKo said:
i wanna try it on FXP 10.2 builts . with this kernel I can skip the fastboot kernel flashing method, can't I?
Click to expand...
Click to collapse
It depends if you already have CWM or TWRP recovery installed. If you have, you shouldn't need to flash via fastboot.
jeroenqui said:
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
Click to expand...
Click to collapse
I like more no 1.
jeroenqui said:
Thanks for your report. I have added Asylum ROM to the confirmed list of compatible ROM's.
Also, I have received 2 alternative designs from @domicq regarding to the bootlogo:
1. http://i.imgur.com/SegB97z.jpg
2. http://i.imgur.com/5Rn0IkR.jpg
What do you guys think? Do you like it over the current one?
Which one do you like most?
Click to expand...
Click to collapse
Number 1 is much better, thanks for your effort!
will it be possible to implement the double tap to wake feature?
leongzxc said:
will it be possible to implement the double tap to wake feature?
Click to expand...
Click to collapse
I'm already working on that It's pretty hard, because I have to modify the touchscreen driver to support that.
But I'm making good progress and I hope to include it in the next version.
Related
Hey hey hey,
proudly presenting my aosp kernel for you. Big thanks to Codeworkx, this kernel is based on his source! I´m not responsible if something happens to your device!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel can be used on:
- Every AOSP based rom (e.g. AOKP, CM9, Rootbox...)
Features:
- OC to 1.35Ghz
- GPU OC to 383mhz
- RAM OC
- UV
- I/O Tweaks
- Patches for better batterylife
- Performance Tweaks
- Fastcharge
- Swpa
- zRam
- NTFS and CIFS
Changelog (3.2.0):
Based of latest source code (the updated one)
Only compiled for jellybean (based on that updates)
Massive cleanup
Optimized code used
Optimized undervolting
Really the fastest horsepower ever
Added 1.5Ghz Overclock
Added OMAP_IPU_IDLE_CONFIG
Added reduced wifi voltages for power savings
Updated SIO
Tweaked CPU-IDLE governor
Fixed 1.35Ghz jumping back
Fixed screenFlickring
Fixed screenoff animation failing sometime
Fixed heat -> lower cpu voltages should be stable enough
Changelog (3.1.0):
Now again booting
Horsepower is complete rebased - clean - fast - stable
ClockWorkMod autoreboot issue is fixed
All sources updated -> speed
USB Mass storage is working correct now on aosp kernel
Default governor is now abyssplug
Changelog (3.0.0):
Horsepower is now available as a BETA version for stock roms
Low RAM OC
Performance tweaks
Code Cleaning
Preparing for dualboot (still long way to go)
Changelog (Release 2.1.5):
Added savagedzen governor
Added sakuractive governor
Added brdzilianeax governor
Added minmax governor
[*]Added abyssplug governor
Added lulzactive governor
Added lazy governor
Added pegasusq governor
Added smartassv2 governor
Added scary governor
Added HYPER governor
Added wheatley governor
Updated interactive governor
Updated interactiveX governor
Updated lagfree governor
Changed default governor to smartassv2
Changelog (Release 2.0.6):
Rebased ics kernel
No Touch recovery for both (ics and jb) versions
Added possibility to undervolt
300 mhz as default cpu speed
Changelog (Release 2.0.0):
Jellybeaned! Both versions (ics and jb) contain same features
Changelog (Release 1.3.5):
Added core2 managemend
Fully working settingsfor fastcharge (through app)
Hope to improve stableness by disabling interactivex governor. Thanks to aidfarh!
Touch and no touch recovery versions
Changelog (Release 1.3.1):
Added interactiveX governor
Added lazy governor
Enabled ip tunneling
Changelog (Release 1.3.0):
Enabled fastcharge (enable in app)
Enabled zRam (partly working, full support in jellybean)
Enabled NTFS support
Enabled CIFS support
Added Touch CWM (Swipe up + down to navigate; swipe right to select; swipe left to go back)
Improved CWM
Improved TouchScreen support
Changelog (Release 1.1.0):
Fixed Wlan
Fixed OC
OC Tweaks
Initial GPU OC to 384mhz
Set min processor speed to 0.15Ghz for better batterylife
Rebuild whole kernel
Added more I/O tweaks
Added USB fast charging
First start at deep idle not fully working yet
Improve kernel stability by not killing kernel threads
Changelog (Initial Release 1.0.3):
keyboard: cypress: Stop notification on low battery
improve the performance of memcpy and memmove of the general version
i/0 tweaks
initial OC to 1.3Ghz
expanded OC to 1.35Ghz
prepared for lulzactive gorvernor
For detailed information visit my github commit list
Installation instructions:
- Download the attached .zip
- Put it to your internal sd-card
- Go into recovery mode
- Hit "install zip from sdcard"
- Reboot and enjoy
Download:
Horsepower 3.0.0 for Stock ICS Roms BETA!
Horsepower 3.0.0 for AOSP ICS Roms
Horsepower 3.1.0 for AOSP Jellybean Roms
__________
Core2Management:
Save your battery and disable the second core of your android device when you dont need it!
!- This app is only for dual core devices made by Samsung -!
This app should work on most android dual core devices from Samsung (maybe also on others but these are untested!). Please report on which devices the app works and on which it doesnt. You have to be rooted! Every time you reboot you need to redisable second core! If the second core starts again at some time use another governor. Not working with hotplug!
Tested devices:
* Galaxy S2 I9100
* Galaxy S2 I9100G
* Galaxy S3
* Galaxy S1
* Galaxy R I9103
* Galaxy Nexus
The app is working with stock cm10 kernel, too!
__________
Sources:
https://github.com/fuss132/android_kernel_samsung_t1/
Awesome!
Gesendet von meinem GT-I9100G mit Tapatalk 2
Now that's what i'm talking about !!
You are the BEST fuss!
This is God like! ^^
YESSSSS :beer:
Sent from my GT-I9100G using Tapatalk 2
Than man u are the best
great.... fuss does this kernel have MMC_CAP_ERASE capability flag disabled like super ICS kernel..? and does the OC include GPU as well?
Great but am I missing something or the download link isn't available yet ?
dante10 said:
great.... fuss does this kernel have MMC_CAP_ERASE capability flag disabled like super ICS kernel..? and does the OC include GPU as well?
Click to expand...
Click to collapse
First one if cm9 kernel has it then this one too I didnt looked at every single commit sorry ^^ and second one not at the moment but maybe some times
Madarox said:
Great but am I missing something or the download link isn't available yet ?
Click to expand...
Click to collapse
I added it in this second
I've no access to market! Could you upload the app please ?
pesiran said:
I've no access to market! Could you upload the app please ?
Click to expand...
Click to collapse
See the attachement
But for all the others you should prefer the play store one as it will be updated regulary
The things looks better for our G version thanks to those awesome devs
Enviado desde mi GT-I9100G usando Tapatalk 2
fuss132 said:
First one if cm9 kernel has it then this one too I didnt looked at every single commit sorry ^^ and second one not at the moment but maybe some times
I added it in this second
Click to expand...
Click to collapse
oh...sorry didn't see it was based on CM9 kernel..code says CM9 kernel have those MMC thing disabled so its safe from those brick bug...i assume this kernel also safe because it is based on CM9 kernel...good work buddy...
fuss132 said:
See the attachement
But for all the others you should prefer the play store one as it will be updated regulary
Click to expand...
Click to collapse
Not found Error !
ok,1st problem:I can't turn on wifi...I'm on CM9 RC.
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
philippsp said:
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
Agree, but cpu is stable. Now higher scores in benchies Thanks man, hope you will fix the wifi problem.
wifi cm9 rc1?
fuss, thanks for great work, but there is a problem of wifi in CM9 rc1 does not function
philippsp said:
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
Madarox said:
ok,1st problem:I can't turn on wifi...I'm on CM9 RC.
Click to expand...
Click to collapse
cesco73 said:
fuss, thanks for great work, but there is a problem of wifi in CM9 rc1 does not function
Click to expand...
Click to collapse
Youre all on CM9 right?
I already found the problem fix soon... Your rom needs an updated wlan.ko module Those cm9 roms these days
If you would use aokp it would be working ^^
WIFI is not working on rootbox too !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ARM.
The Next Reliable Managed Architecture.
NOTE
- ARM or Android Reliant Management, Aims to bring full battery saving to our devices and add features not introduced. This would of course reduce battery hunger and at the same time, sustain the performance of our phones.
THIS IS A MODDED Kernel with Many fantastic features within. I am not responsible or credited for the kernel source codes whatsoever. I only modify the kernel to my needs and add more features not available from the base which will be beneficial to all of us. This Kernel is GPL Compliant and is fully Open Source. Please provide a CLEAR Credit should you use this Source as your base.
Click to expand...
Click to collapse
- Dynamic Frequency Mode - Improves Battery Life & Performance
- Added Governors for more options
- Tweaked to the limit for more performance
- Sustained Battery Life while improving Performance
- Added More I/O Schedulers for more options
- Edited/Re-Engineered Hardware modules for more Power Savings
- Overclocking up to 1.5GHz (EXPERIMENTAL. Use at your own risk)
- Overvolting for high performance activities
- Undervolting for Power Saving
Click to expand...
Click to collapse
Source Code Distribution
Github [CM] - Source
===============CHANGELOG=================
Base : CyanogenMod 10
Maintainers : nicholaschw
=Older Bootloader=
~~~~~~~~~~~~~~
Nightly 1
- Initial build
- Toolchain Fixes
- Added Powersave governor
Nightly 2
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
=Newer Bootloader=
~~~~~~~~~~~~~~
Nightly 3
- Initial Build
- Fixes for Wireless compiling bugs
- Toolchain fixes
- Added Powersave, Hotplug & SmartAssV2 Governors
- Added SIO Scheduler 2012
- Tweaked I/O Schedulers
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
Nightly 4 FINAL
- Added lulzactive governor
- Added 1.5GHz OC
- Add OV Support
- Add UV Support
- Tweaks into drivers
Nightly Plus
- Fixed Zip (Thanks to benee)
- Added some extra modules
- Rebased Sources to fix toolchain related errors
Nightly Build 6
- Reduced OC to 1.3GHz
- Fixed voltage arrays
Nightly Build 7
- Added configs for OC
- Disabled OC for now
v1.00 Golden Master
- Tweaked OC for stability
- Reduce backlight brightness to minimum
- Tweak the DVFS for UV and OV Stability
Click to expand...
Click to collapse
====================
Bugs + CM +
--------
- All CM10 Kernel Bugs
-Credits-
CyanogenMod, for providing AND fixing the source codes actively
YOU, Readers, for providing me a place to allow you to give me suggestions
Xonar, For assisting in many parts of the modifications
cyclon, for introducing new modifications
Google, For allowing me to identify whatever errors i face.
Vork & Koush, For AnyKernel Flashable Zip
benee for the zip fix
The Other Githubers who I merged commits into source
> XDA Community, Giving comments on whatevers best for implementations
ANY FLAMING OR CRITICISM WILL BE REPORTED.
ARM., Is not to be mistaken with ARM. ARM. Is not related to ARM Whatsoever in terms of name.(We use ARM for our processor, so we are related somehow by, the ARM architecture used in our phones.)
+DO NOT MIRROR+
EVERYTHING IS GOING ACCORDING TO DATE OF RELEASE.
Bug Reports? Post them here. Please include a logcat and dmesg and a brief situation of what happened visually. Doing this will get your bugs fixed faster.
How To Install
- Download the flashable zip below
- Put it into your sdcard (Anywhere you like. Just remember its location)
- Boot into recovery
- Wipe cache, Dalvik Cache (NO NEED TO WIPE DATA UNLESS YOU WANT TO)
- Install the zip package
- Reboot
- Enjoy the Excitement!
Troubleshooting?
- WIFI Failure = - WifiModule-ConservativePM-V3.zip -> super conservative on battery, less wifi reception
Download
- WifiModule-NormalPM-V3.zip -> will go in full mode when not asleep, a bit more power hungry, full wifi reception
Download. (Thanks to pengus77)
Link List - CYANOGENMOD BASED (Old Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-Nightly1-P990.zip - 5.08 MB [28-12-12]
md5: 7d36e7ac1891345ce89e62326a9979be
ARM-Nightly2-P990.zip - 5.08 MB [28-12-12]
md5: e46c3a8c989d61b67d8a4d2e437a26b9
*NOTE* OLD Bootloader Version will carry on, but each release takes longer than the new bootloader
Link List - CYANOGENMOD BASED (NEW Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-P990-Nightly3.zip - 5.08 MB
md5: d52342cb01a3b60a11cca65a8b208a0a
ARM-P990-Nightly-FINAL.zip - 5.09 MB
md5: 7c4ccf986c9fda2105b6462adcd51487
ARM-P990-NFPlus.zip - 4.78 MB
md5: 580c2e29326ea0b5d016baccffadf7f4
ARM-P990-B6.zip - 4.78 MB
md5: 0f2842812e41b235d6bf14acac2511a3
ARM-P990-B7.zip - 4.78 MB
md5: f3cde8f65bf3e7875f84247799d0e235
FAQs
+ Q: Whats the difference?
A: Read the disclaimer.
+ Q: Will I get worse performance than the Official CyanogenMod Kernel?
A: It depends on what commits are added. My Kernel only fixes bugs i can fix and which are unsolved and Of course, I will add more features not available in CyanogenMod Official
+ Q: What makes the stock kernel different?
A: You get goodies, and furthermore, better battery life and performance in this project.
Nice to see a singaporean are so gd in it. Gd job Bro
Is it compatible with unlocked new boot loader?
Sent from my LG-P990 using xda app-developers app
oOPS, me forgot to mentionn,
New bootloader version to be released next week.
This is a clean build of the old bootloader, note that only features come in next week.
For the new bootloader, the initial is next week and features come in the following week.
EDIT~
Push the newsworthy thread link now! When we go on the portal news, you get ten times more goodies! Help ARM. develop its potential!
good luck with your arm project sir. cant wait to test for the new bootloader version.
mkchan said:
good luck with your arm project sir. cant wait to test for the new bootloader version.
Click to expand...
Click to collapse
sure!
almost want to go to old BL just to try it =D. sounds erpic!
no testers reported back yet?
If it is not to much for you can you please releas the nightly not only for the new (bl) in the future. also for the old (BL).
Gr8 News, cant wait next week to try the new bootloader version :good:
Thanks for the Hard Work!
Great! Thanks for your work man, tried and seems very good! But the freq of the cpu in interactive gov is always at 1000mhz xD
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
nicholaschw said:
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
Click to expand...
Click to collapse
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
kekks said:
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Its a Kernel. -_-
thanks definitely gonna try it.....working with new bl is the great news.....Thanks....
Me gusta
nicholaschw said:
Its a Kernel. -_-
Click to expand...
Click to collapse
xD
--------------
Well, I don´t know where the 'bug' is coming from, but since the new CM10, notification light isn't working anymore. I'm no kernel developer but I think the issue is there anywhere.
It would just be nice if you maybe could have a look there, as it's a feature, I miss for more then a month now.
With the kernel on the new bootloader my Wifi doesn' t work -.-
Gesendet von meinem LGP990 mit CM10.
Please Read the 2nd OP before posting bugs here.
And, updated OP for WIFI Fix.
Take note, the fix is only for those who get those issues. DON'T Flash unless you get the problem.
Now, If you let me peacefully add more features
Saving up for an O2X!
EDIT
Updated OP for final Nightly.
Next version is the GM. Its the final version before release channel, which will be uploaded to ROM Manager's database.
hi there nicholas, i was just wondering, since this kernel looks very promissing, is there any chance of merging voodoo sound support in the future?
Standard disclaimer:
Your warranty is now void. Use at your own risk.
In other words: It is your choice to use this software,
I am not responsible for any damage or problems!
Click to expand...
Click to collapse
Futures:
- under voltage support
- gamma control (to use it you need to run insmod /system/lib/modules/msm_kcal_ctrl.ko or add such file in init.d:
Code:
#!/system/bin/sh
insmod /system/lib/modules/msm_kcal_ctrl.ko
- sound control (faux code)
- gpu oc to 450Mhz
- gpu voltage control (you can access it via /sys/devices/system/cpu/cpufreq/vdd_table/gpu_mv_table default values are 945 mV, 1050 mV, 1150 mV to change the voltage run for example
Code:
echo "935 950 1150" > /sys/devices/system/cpu/cpufreq/vdd_table/gpu_mv_table
- cpuquiet for best cpu hotplug policy, I suggest to use load_stats for best balance between battery live and performance
- cpu governors (default preservative):
preservative for best battery live without losing any smoothies in system UI and ever day usage! http://forum.xda-developers.com/showpost.php?p=50173462&postcount=662
inteliactive for best performance
- LoUIS cache
- kernel runs in NEON mode
- optimized ARM RWSEM algorithm
- memutils optimization
- uksm - optimized RAM usage, using only a little bit of cpu power for that
- dynamic writeback - dynamically manage the dirty page writebacks with two different intervals, one when the screen is on and another when the screen is off. more info http://forum.xda-developers.com/showthread.php?p=42354290#post42354290
- interactive gpu governor
- Linaro and compile optimization -Ofast
- other small changes, to read in github commits
Big thanks goes to:
- rebelos for SlimKat (base source for this kernel)
- DooMLoRD, alnikki25k, jeroenqui, aidfarh for they kernel for yuga, often explored they repos for interesting things and changes
- faux123, ak and francisfranco for they kernel for other devices, I have taken much from they work
- And others with I not remember now!
-
FAQ:
- this kernel should run on most AOSP 4.4 based ROM's but I am testing it only on SlimKAT, report on with ROM's it works too
- for now no OC support - Z is fast enough phone, but is is getting hot on high usage and eats the battery fast so I don't think OC is really usefully
- on default settings you will got lower benchmark score in for example Antutu it got ~17k instant 20k - this is because we are using preservative cpu governor as default but since they are no lags in every day usage I don't care about it! Change to inteliactive if you want higher benchmark scores
Download
https://dl.dropboxusercontent.com/u/1664131/firekernel-yuga_v0.3.1beta.zip
https://dl.dropboxusercontent.com/u/1664131/firekernel-yuga_v0.3beta.zip
https://dl.dropboxusercontent.com/u/1664131/firekernel_yuga_v0.2beta.zip
Source
https://github.com/dragonnn/kernel_sony_apq8064
ROM's on they it doesn't work (for now, tested by other users):
- Vanir
- DU
- Pabx
- OmniROM
Changelog:
v0.3.1
- fixed wakeup gestures - now they should work
v0.3
- gpu voltage control
- force run all cores on one freq when user sets other min/max freq
- small gpu code cleanup form xzaosp
- gamma control
- true cd-rom emulation mode
- doubletap2wake and sweep2wake via generic sysfs files
- fixed wifi speed (I had some problem to get my full network speed on wifi)
XDA:DevDB Information
Firekernel for yuga, Kernel for the Sony Xperia Z
Contributors
dragonnn
Kernel Special Features: UV, dynamic fsync, dynamic writeback, UKSM, cpuquiet
Version Information
Status: Beta
Current Beta Version: v0.3
Beta Release Date: 2014-05-07
Created 2014-05-07
Last Updated 2014-05-14
OMG....downloading bro..
EDIT:- booted successfuly with AICP rom..no issues so far..good work bro
Sent from my Xperia Z using Tapatalk
Awesome !!!
Hey, you made my Day.
Downloading and testing on 4.4.2 slimkat weekly 4.9.
I will report back soon.
Best Regard's
Alex1911
MY configuration
Governor : Preservative
Scheduler: Fiops
Fsync : On
Cpu Quiet : load_stats
Mp decision : off
the only missing thing was Double tap to wake..but that's not an issue its running smoothly..:good::good::good::good::good::fingers-crossed:
Excellent, will give it a shot on Vanir 4.4.2.
EDIT:
Doesnt work with Vanir, get past boot logo, during boot animation, it then goes into a boot loop, without the kernel logo being displayed again, screen gets lit (although still black)and just loops on and off like this,
Cheers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Xperia Z using Tapatalk
spida_singh said:
Excellent, will give it a shot on Vanir 4.4.2.
EDIT:
Doesnt work with Vanir, get past boot logo, during boot animation, it then goes into a boot loop, without the kernel logo being displayed again, screen gets lit (although still black)and just loops on and off like this,
Cheers
Click to expand...
Click to collapse
Does other kernels like MOEW works on it? Could you give me a logcat?
Wysłane z mojego C6603 przy użyciu Tapatalka
Very Nice. Tested on Pabx rom and it boots but serious issue when you hit the power button screen goes black but is still on Baseband unknown so wifi and cellular radio dont work
Techpenguin5 said:
Where did you find AICP rom for the yuga
Click to expand...
Click to collapse
http://dwnld.aicp-rom.com/
Sent from my Xperia Z using Tapatalk
That is exactly the best kernel, in my opinion.
Alex1911 said:
Hey, you made my Day.
Downloading and testing on 4.4.2 slimkat weekly 4.9.
I will report back soon.
Best Regard's
Alex1911
Click to expand...
Click to collapse
I tested it on SlimKat 4.9 weekly build.
Kernel confug with TricksterMOD:
CPU Governour: Preservative
FSync: On
SOC Temperaturlimt: On
CPU Clock 384-1512 mhz
GPU Clock: 400 mhz
Undervolt on all Frequencies: -37,5 mV
CPU Quiet: load stats
CPU powersave: very agressive
Soooo...this kernel is in beta stage ? are you kidding, @dragonnn ?
This is the best and fastest working kernel i have had for my Device and i will surely stick with it
Keep up the very good and hard work
Best Regard's
Alex1911
Yes, you have post your kernel in the new thread Very good news!
Thanks... Very thanks man
anything other good has future ?
* Gamma control
* Sweep 2 Wake
* Doubletap 2 wake
* USB Fastcharge
usb fastcharge is already , about s2w and dt2w in next version I think. With Gamma Control I will see what can I do.
It is beta because it wasn't tested by many users for now.
Wysłane z mojego C6603 przy użyciu Tapatalka
dragonnn said:
usb fastcharge is already , about s2w and dt2w in next version I think. With Gamma Control I will see what can I do.
It is beta because it wasn't tested by many users for now.
Wysłane z mojego C6603 przy użyciu Tapatalka
Click to expand...
Click to collapse
It has already been tested by me and I'm very happy (3 days already I am with your kernel)
Ok i'm very happy to your work because optimise kernel are very rare
PS: Gamma Control is really very good and will be appreciated
dragonnn said:
Does other kernels like MOEW works on it? Could you give me a logcat?
Wysłane z mojego C6603 przy użyciu Tapatalka
Click to expand...
Click to collapse
MOEW does not work with Vanir, im trying to get logcat during boot, ill also grab a syslog and upload, hopefully it helps. I managed to logcat usin adb and write output to PC, but dont know if it stopped once the device booted up with your kernel.
Will upload shortly
EDIT
Logs attatched
Screen flickering on DU v.07,.
Sent from my C6603 using XDA Premium 4 mobile app
spida_singh said:
MOEW does not work with Vanir, im trying to get logcat during boot, ill also grab a syslog and upload, hopefully it helps. I managed to logcat usin adb and write output to PC, but dont know if it stopped once the device booted up with your kernel.
Will upload shortly
EDIT
Logs attatched
Click to expand...
Click to collapse
muphetz said:
Screen flickering on DU v.07,.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It looks like booth of your ROM's uses different gpu driver with isn't compatible with my, unfortunately I can not do much for now without breaking the support for CM/SlimKat and other ROM's on they it works.
dragonnn said:
It looks like booth of your ROM's uses different gpu driver with isn't compatible with my, unfortunately I can not do much for now without breaking the support for CM/SlimKat and other ROM's on they it works.
Click to expand...
Click to collapse
No problem, i had a feeling it may have been ROM specific, any way to 'fuse' the ramdisk with the kernel similar to how alnikki25k does it, he has managed to keep compatibility by doing it this way, although there are still some graphical issues, which I think have been resolved, but not built / released since.
Either way, thanks for your work. I may have to switch ROMS, or wait for a solution.
Regards
spida_singh said:
No problem, i had a feeling it may have been ROM specific, any way to 'fuse' the ramdisk with the kernel similar to how alnikki25k does it, he has managed to keep compatibility by doing it this way, although there are still some graphical issues, which I think have been resolved, but not built / released since.
Either way, thanks for your work. I may have to switch ROMS, or wait for a solution.
Regards
Click to expand...
Click to collapse
I know what about are you talking - this needs are reworked flashable zip with generates the boot.img by using ramdisk form you old ROM with zImage (with is the kernel) when you flash it. I will provide such zip, but as you says this will not fix all problems.
Great work @dragonnn!
Working nicely on PA 4.3
This is a fantastic kernel...working on AOKP , thanks a lot @dragonnn
Sent from my Xperia Z using XDA Premium 4 mobile app
By flashing this kernel, you accept your fate.
This is my personal project, because of the lack of any custom kernels that had the features I want. So let me introduce myself. First of all, I'm noob in kernel developing. I've been using many great kernels on my Desire HD and Nexus 4. I've been hoping for such a kernel for our devices for the last 3 months but as it seems, more time is spent on cooking roms instead of kernel development. So well, here we are. I've been working on that for the last two weeks so, this is probably stable, but the alpha tag will stay at least till more people confirm that it works on different roms.
Initial kernel features:
Compiled with stock toolchain (for now)
Disabled software CRC + option to turn it on
Disabled fsync + option to turn it on
Fixes for high cpu load times, which can cause some governors to not work as they should
Disabled zram - with 2/3 GB of ram in our devices, we don't really need that.
Added Kernel Samepage Merging - off by default
Added FIOPS and SIO i/o schedulers
Added ZZmove and ElementalX cpu governors
Added toggle for Touch boost - you can now turn that off.
Added full KCAL display settings support.
Other optimizations
Safe roms confirmed to be working with the kernel
Official AICP - tested by me
Official RR - tested by @nexuspur (Huge thanks to you mate!)
AOSP+RRO - tested by @sheshuvadrevu
Official AOKP - tested by @DarkHero140
CM by banmeifyouwant - tested by @CodeBreaker13
DU - tested by @Windslash31 and @DarkHero140
Not safe roms
Mokee - giving bootloops
Santosh's CM13 - giving bootloops.
Flashing Instructions
Flash only if you're using CM based roms that follows the official CM device/kernel/proprietary repos! That kernel IS NOT FOR MIUI or AOSP Rom
Make backup of boot in twrp
Flash the kernel zip and reboot
About feature requests
I'm sure that many of you will ask for feature A B C. Please don't mention wake gestures as dt2w and swipe2wake, because I will NOT add them. To rework all the gestures for that is a massive job. Even if it was an easy commit to cherry-pick, I still wont add it, because this is battery drainer. We have FP sensor so use it, or wake the device with the power/volume buttons.
Everything else as request is welcomed, but not guaranteed that it will get in the kernel. Remember this is my project and I'll be adding only features that I find useful.
Downloads
KTO Kenzo Alpha4 (09-07-2016)
KTO Kenzo Stable 1.0 (11-07-2016)
KTO Kenzo Stable 1.1 (17-07-2016)
KTO Kenzo Stable 1.2 (21-07-2016)
KTO Kenzo Stable 1.3 (13-08-2016)
Recommended settings and app for tuning Kernel Adiutor-Mod
CPU
Governor: Alucard on both clusters
Touch boost: Off
Freqs: Little cores - 691-1440; Big cores - 400-1804
GPU
Don't touch it. Let Adreno idler do its job
Power and battery
Power suspend mode: Hybrid
I/O Scheduler
Scheduler: bfq
Read-ahead: 512kb
Add random: on
I/O stats: on
RQ Affinity: 1
KSM
KSM: Off
Entropy
Read: 192
Write: 384
Network
TCP congestion: Westwood
Android logging: Off
Software CRC: Off
Fsync: Off
XDA:DevDB Information
KTO Kenzo, Kernel for the Xiaomi Redmi Note 3
Contributors
ktomov, banmeifyouwant, TheStrix
Source Code: https://github.com/ktomov/android_kernel_xiaomi_msm8956
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-07-11
Created 2016-07-10
Last Updated 2016-07-11
Changelogs:
KTO Stable 1.0
Added adreno idler driver for lowering the GPU power usage
Added the following tcp congestion algorithms: veno, reno, bic, westwood, highspeed, hybla, htcp, vegas, scalable, lp, yeah, illinois (Cubic as default)
Some optimizations here and there
KTO Stable 1.1
Added Alucard and Darkness governors. They both perform well. I'm using Alucard which is tuned a bit.
Some vibration tunes
Changed the toolchain from google's default to @DespairFactor UberToolchain 4.9. Sadly I get bootloops after Miui logo with 5.X so can't even get a logcat. Will debug that in the future.
KTO Stable 1.2
Unlocked 1440MHz for a53 and 1804MHz for a72 cores freqs, just like on Xiaomi's original kernel. (Thanks for the tip @Umang96)
QC 2.0 is added - Haven't seen any change with the stock charger. Temperature is normal. Charging around 1600 mah.
Alucard - tuned one more time for the new freqs.
KTO Stable 1.3
Synched with latest CM sources, so we have new led driver and many bugfixes.
Added hardware CRC32 accelerator
Fixed -2/50% bug for people that had if before
Fixed the sudden 2% battery drop bug
Added power suspend driver
Remove the so called "qc 2.0" fast charging. To be fair, I haven't seen any improvement in charging time, but the batter was going hot. Charge your device overnight.
Some entropy tuning
Other patches for better memory speeds
Damn finally someone understands that dt2w is pointless on our device lol.thanks for another kernel.will flash on mokee and let you know?
Sent from my Redmi Note 3 using Tapatalk
Obviously we wait for working fingerprint of Goodix sensor
thx, try it
Thanks for the share @ktomov :highfive:
"First of all we are usung atmel touchscreen driver" Not true
check output from geteven -l and post ur screenshot here sir
picarito said:
Damn finally someone understands that dt2w is pointless on our device lol.thanks for another kernel.will flash on mokee and let you know?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Update: doesn't work with mokee.it boots and stays in mokee bootscreen and stays there.i wiped cache and dalvik before and after flashing kernel.oh well thanks for the kernel anyways.[emoji106]
Sent from my Redmi Note 3 using Tapatalk
Working on aosp too [emoji4]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Redmi Note 3 using Tapatalk
Shahan_mik3 said:
"First of all we are usung atmel touchscreen driver" Not true
check output from geteven -l and post ur screenshot here sir
Click to expand...
Click to collapse
My mistake. It looks like I got focaltech. Guess I got confused with xiaomi's changes to the atmel folders in their kernel source
picarito said:
Update: doesn't work with mokee.it boots and stays in mokee bootscreen and stays there.i wiped cache and dalvik before and after flashing kernel.oh well thanks for the kernel anyways.[emoji106]
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Can you share what recovery are you using?
sheshuvadrevu said:
Working on aosp too [emoji4]
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the info! Will add it in the first post
ktomov said:
My mistake. It looks like I got focaltech. Guess I got confused with xiaomi's changes to the atmel folders in their kernel source
Can you share what recovery are you using?
Thanks for the info! Will add it in the first post
Click to expand...
Click to collapse
what changes in alpha 4?
Plamb1r said:
what changes in alpha 4?
Click to expand...
Click to collapse
That's the initial version, so everything is in the first post. Alpha 1/2/3 were very early testing versions that @nexuspur tested for me on RR rom.
good luck my friend, hope you ll your best, i am testing right now your kernel, seems to be good
DarkHero140 said:
good luck my friend, hope you ll your best, i am testing right now your kernel, seems to be good
Click to expand...
Click to collapse
Can you mention on what rom are you using it? Thanks in advance!
ktomov said:
Can you mention on what rom are you using it? Thanks in advance!
Click to expand...
Click to collapse
i am on aokp rom) official one, but ater will flash dirty unicorns, dont like cyanogen based roms, they are getting laggy after some time, but aosp based roms still smooth even after 2-3 month))
DarkHero140 said:
i am on aokp rom) official one, but ater will flash dirty unicorns, dont like cyanogen based roms, they are getting laggy after some time, but aosp based roms still smooth even after 2-3 month))
Click to expand...
Click to collapse
The reason I'm asking, is so to know on which rom the kernel is working fine so I could add it on the first post. No one wants bootloops lol
ktomov said:
My mistake. It looks like I got focaltech. Guess I got confused with xiaomi's changes to the atmel folders in their kernel source
Can you share what recovery are you using?
Thanks for the info! Will add it in the first post
Click to expand...
Click to collapse
I'm using alka twrp recovery
Sent from my Redmi Note 3 using Tapatalk
ktomov said:
The reason I'm asking, is so to know on which rom the kernel is working fine so I could add it on the first post. No one wants bootloops lol
Click to expand...
Click to collapse
i understood already, it is okay
So far so good with cm from banmeifyouwant and TheStrix.
picarito said:
I'm using alka twrp recovery
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Guess Mokee have changed something :/ Too bad I can't see their sources
Tried to transfer information from their original thread. Posting my edits with the permission of @Pafcholini and the rest of the Emotroid Team. They Have done great work on the emotion kernel, if you want any more info and it is missing here, you can check out the main thread here ----> http://forum.xda-developers.com/note-4/orig-development/tw-kernel-emotroid-team-t2990557
This is my first time really contributing anything to the dev community even it is kind of small, I am just happy to help out some way! Enjoy folks
Pafcholini said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Emotion nightly Kernel Note 4 -
-SM-N910F SM-N910G -
Developed by Placiano and Pafcholini
More stable, more performance, more of everything!
Introduction
Introducing the Emotion Revolution Roms & Kernels for Android Devices.
Emotion Rom/Kernel is a modified, aftermarket firmware/Kernel distribution few Android devices (Note 2, Note 4, HTC M7, Newman N2). Based on the Android Open Source Project , Emotion Rom & Kernel is intended to increase performance and stability over Android-based Devices released by sellers, for example, Samsung, HTC and so forth. Emotroid additionally offers a mixed bag of features & improvements that are not presently found in stock variants of Android.
POST 1: Kernel Information, Changelog, Credits,Screenshots
POST 2: Synapse, Recommended settings, FAQ, etc.
POST 3: Know/Reported issues
Request new features here
Features:
Kernel compatible with SM-N910V
Based on Samsung Open Source Code
Kernel compatible with TW and CM
Compiled with Toolchain Linaro GCC 5.1.2 Stable
Linux version 3.10.40
GPU OC/UC -> 800MHz / 166MHz
PowerSuspend Driver
KSM enabled
Wake Gestures (DT2W, DT2S, S2W, S2S)
Adreno idler Algorithm
Simple GPU Algorithm
Voltage Control
KCAL - Advanced color control
Led Control / Fading
CRC Settings
Advanced TCP control
Selinux Permissive
CIFS Support
NTFS Support
LZ4 compression algorithm
Reduced wakelocks
Kernel Adiutor
Governors: Barry-Allen, interactive_pro, intelliactive, bluactive, conservativex, alucard,darkness, nightmare, smartassV2, ondemandplus, umbrella_core, yankactive, dancedance, bioshock, lionhearth, conservative, interactive, ondemand,powersave, userspace, performance, impulse, zzmoove
I/O Scheldures: bfq, vr, fiops, zen, fifo, sio, test-ioshed, cfq, row, deadline, noop
Installation instructions
You need to have TWPR, CWM o Philz Recovery.
Download the last kernel
Reboot in recovery mode
Make backup (recommended)
Flash the zip
Wake Gestures:
Thanks To/Credits
Thanks to @hsbadr for contribute on the SM-N910V source code
Andip71, AndreiLux, apb_axel, Arter97, Civato, Christopher83, Codeaurora, DerTeufel, Faux123, Ffolkes, Flar2, Franciscofranco, Franlov, Friedrich420, Gokhanmoral, Imoseyon, Infernum, Javilonas, ktoonsez, Linaro, LoungeKatt (TwistedUmbrella), myfluxi, neobuddy89, savoca, UpInTheAir, Yank555.lu, ZaneZam.
Testers: @myaslioglu @Jdidtht @aloom @moe67er @anthony92170 @ronnie498 @blacklabel2020 @ravenseb @TheGrandFinale2001 @coolfire @monleylord @_Sofos_ @Rsroms @masterchif92 @piretia @nymikey @vanito @Teknodad1974 @JoeBear1975 and @Flashvetrin (R.I.P.)
And all users that support the thread and the kernel!
I hope I have not forgotten anyone!
Hit the "thanks" button if you like our work.
You can follow new updates here (Spanish)
XDA:DevDB Information
Emotion Kernel, Kernel for the Samsung Galaxy Note 4
Contributors
Pafcholini, aukhan, placiano
Source Code: https://github.com/Pafcholini/emotion_kernel_note4_mm
Kernel Special Features:
Version Information
Status: Nightly
Current Stable Version: Emotion nightly r25.
Stable Release Date: 2016-09-09
Created 2015-01-01
Last Updated 2016-09-09
Click to expand...
Click to collapse
Pafcholini said:
Know issues
1. Synapse doesn't show CPU governor tunables.
I'm trying to fix it. FIXED
2. Sometimes Synapse (and others kernel control apks) show that the min frequency is 1190MHz (or other frequency).
Just cancel it. FIXED
3. Ondemand doesn't work well. FIXED
Thanks for the report @Vangelis13
4. The OTG doesn't work in r8. FIXED
Click to expand...
Click to collapse
XDA:DevDB Information
[TW/CM][Emotion Kernel r26][SM-N910F-G][9-SEP-2016][6.0.1]Emotroid Team, Kernel for the Verizon Samsung Galaxy Note 4
Contributors
KingVekxin, Pafcholini, Placiano, The rest of the Emotroid Team
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Emotion r26
Stable Release Date: 2016-09-12
Created 2016-09-14
Last Updated 2016-09-13
CHANGELOG
9/13/2016: Moved thread to the Dev section, added ZL Kernel CHECK IN DOWNLOADS SECTION (upper section in browser view)
DOWNLOADS
Emotion ZL Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=20389
Emotion 4 Verizon Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=20388
Let me ask this.. This is from what I guess is for TW and CM roms? Also what is the N910F-N910G, are they international phones? I saw a few roms and was woundering how easy it would be to port them to verizon.. I will download and flash this kernel.. Thanks.
doubledragon5 said:
Let me ask this.. This is from what I guess is for TW and CM roms? Also what is the N910F-N910G, are they international phones? I saw a few roms and was woundering how easy it would be to port them to verizon.. I will download and flash this kernel.. Thanks.
Click to expand...
Click to collapse
Yes they are international variants of our device. But as far as rom porting, thats beyond what I know how to do right now so I dont want to steer you in the wrong direction with how to do it.
Sweep2Sleep only works right to left not left to right
Running on Paul Rizz, works great, I love this kernel
Sent from my SM-N910V using XDA-Developers mobile app
Does this support F2FS format?
Thanks. Gonna try it with cm 13!
@KingVekxin thank you sir for post the link, very much appreciated!
Advanced Labs V.I.P Member
---------- Post added at 02:36 PM ---------- Previous post was at 02:32 PM ----------
I'm running Modest ROM and Oscars kernel, I tried xposed but can't get it to work. I was hopping by flashing this kernel that I could use xposed, and maybe battery life it be just a little better.
Advanced Labs V.I.P Member
I can't get Synapse to work with this kernel -- it keeps saying "No UCI support detected". According to the main thread, this means a bad flash. I've reflashed it with the same results.
Any ideas?
CM 13 bootloops with this kernel.
Running smooth for me.
Coldblackice said:
I can't get Synapse to work with this kernel -- it keeps saying "No UCI support detected". According to the main thread, this means a bad flash. I've reflashed it with the same results.
Any ideas?
Click to expand...
Click to collapse
I've been using kernel adiutor to set things up but I can try to run synapse to get some sort of clarity
Bren123 said:
CM 13 bootloops with this kernel.
Click to expand...
Click to collapse
Try checking the main thread, I havent run a CM rom in years unfortunately
KingVekxin said:
Try checking the main thread, I havent run a CM rom in years unfortunately
Click to expand...
Click to collapse
I tried the cm international one it works just no wifi as expected do you know where I could get a compatible cm kernel?
Working fine with kernel adiutor... having fun with doubletap2wake. Haven't had that since my lg g3!
sulpher said:
Working fine with kernel adiutor... having fun with doubletap2wake. Haven't had that since my lg g3!
Click to expand...
Click to collapse
Glad to hear it's working smoothly for you
KingVekxin said:
Glad to hear it's working smoothly for you
Click to expand...
Click to collapse
Have you been able to get the ZL Emotion Kernel working properly? I'd love to make the switch from Oscar to have my ZL show proper stats, but I saw a couple of your posts on the main thread that seemed to indicate that it still doesn't show the correct battery stats or have all of the Governors listed in the OP. Thanks for the help and the post!
shadeau said:
Have you been able to get the ZL Emotion Kernel working properly? I'd love to make the switch from Oscar to have my ZL show proper stats, but I saw a couple of your posts on the main thread that seemed to indicate that it still doesn't show the correct battery stats or have all of the Governors listed in the OP. Thanks for the help and the post!
Click to expand...
Click to collapse
I'm still waiting to hear from someone on that issue, but it seems a lot of the Governors were taken out a few builds ago unfortunately, I saw no real explanation for it either I was looking all through the thread