Boot image modification for JB 4.1.1 P3100ZSCLL1_P3100BRICLL1 (Taiwan) kernel 3.0.31-595683, please re-check your kernel version first before flashing BOOT_P3100ZSCLL1_P3100BRICLL1_595683_REV04_user_low_ship_blackhawk.tar.md5!
Mount external SD card as internal SD card. Link /sdcard, /mnt/sdcard, and /storage/sdcard0 to /storage/extSdCard. Mount /data/media on /storage/sdcard1, link /mnt/sdcard1 to /storage/sdcard1. You can disable this feature by copy /res/init.post_boot.sh to /system/etc/init.post_boot.sh
bootanimation.zip in /system/media or /data/local support, disable power off animation if bootanimation.zip exist
Disable power up sound
Post boot script support /system/etc/init.post_boot.sh
adb on charger mode, thanks codeworkx
adb on boot
Flash BOOT_P3100ZSCLL1_P3100BRICLL1_595683_REV04_user_low_ship.tar.md5 to restore the original boot image.
Overclocked kernel in post #9!
Reserved!
Can you make an oc kernel for the 4.1.2 release for france??? Also to add GPU oc/uc/uv/
Still fighting with pvr graphics subsystem. My compiled kernel boot successfuly but failed to start Android graphics If I can solve the graphics problem, we still lose the exFAT support.
ketut.kumajaya said:
Still fighting with pvr graphics subsystem. My compiled kernel boot successfuly but failed to start Android graphics If I can solve the graphics problem, we still lose the exFAT support.
Click to expand...
Click to collapse
Hmm okay what's the problem with the graphics
Sent from my GT-P3100 using Tapatalk HD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yoo..hoo... And my graphics driver [email protected] newer than yours Check it using "cat /proc/pvr/version". But as I said before, I lost exFAT support.
ketut.kumajaya said:
Yoo..hoo... And my graphics driver [email protected] newer than yours Check it using "cat /proc/pvr/version". But as I said before, I lost exFAT support.
Click to expand...
Click to collapse
Okay so are you going to fix the exFAT??
Sent from my GT-P3100 using Tapatalk HD
tapan15in said:
Can you make an oc kernel for the 4.1.2 release for france??? Also to add GPU oc/uc/uv/
Click to expand...
Click to collapse
Overclocked CPU and GPU
Update, restore back 1.008GHz:
Overclocked 3.0.31 kernel kkboot-0.4-jb-overclock-p31xx.zip! Tested on P3100 JB 4.1.1 P3100ZSCLL1_P3100BRICLL1, CPU clock: 300MHz 600MHz 800MHz 1.008GHz 1.2GHz, GPU clock 153.6MHz 307.2MHz 384MHz, latest PowerVR SGX 540 driver. Backup yours /system/lib/modules and /system/vendor folder before applying this flashable zip. By applying this boot image you will lose your exFAT kernel support. This kernel only support FAT16 and FAT32 SD card. Use this at your own risk.
Flash this using CWM recovery. Beware: this is totally different kernel with the OP and a flahsable zip to restore the original kernel not ready yet!
can you explain please how the blackhawk file is different from the other file in OP.
thank you ketut
edit : plz ignore..... just understood lol
Good Job man!
Is it possible to port this to the vers. P3100XXCLL2_P3100XEFCLK1 kernel??
Hello,
Is there possible to build ROM from opensource.samsung.com sir ?
Thanks.
nicosoftmedia said:
Hello,
Is there possible to build ROM from opensource.samsung.com sir ?
Thanks.
Click to expand...
Click to collapse
Android licensed as Apache and Samsung only released the GPL part of the source so it's quite difficult to build Android base on Samsung's GPL source only. Better you use Cyanogen's P3100 port as base.
coringabrazil said:
Good Job man!
Is it possible to port this to the vers. P3100XXCLL2_P3100XEFCLK1 kernel??
Click to expand...
Click to collapse
If you're brave enough, you can try this overclocked kernel on 4.1.2
coringabrazil said:
Good Job man!
Is it possible to port this to the vers. P3100XXCLL2_P3100XEFCLK1 kernel??
Click to expand...
Click to collapse
ketut.kumajaya said:
If you're brave enough, you can try this overclocked kernel on 4.1.2
Click to expand...
Click to collapse
Confirmed by my friend, my overclocked kernel works on his 4.1.2!
The overclocked kernel now "officially" in KK-Boot thread http://forum.xda-developers.com/showthread.php?t=1855700 with a small fix: give a regular user to access /sbin .
Can you make a oc kernel for 3110 ?
KingBeike said:
Can you make a oc kernel for 3110 ?
Click to expand...
Click to collapse
*p31xx.zip file name mean may be it compatible to P3110
kkboot 041 jb OC kernel will work with all stock and custom jb touchwiz roms right ? wont work with CM 10.1 ? thanks
seems like my tab cant handle any type of cpu overclocking
Related
Support Has been Dropped for xda...
Please Delete Thread Mods.
~Eugene
Via Source
All Source Codec is Updated by me.
ULF Source sztupy
/system Corruption fixed by me on Vibrant Kernel's... ( Mount Point issue's, Easy Fix )
UV Source raspdeep
What made you decide to support ReiserFS?
solarpanel said:
What made you decide to support ReiserFS?
Click to expand...
Click to collapse
Just trying to make Everyone Happy as all I keep hearing is Lagfix Lagfix... I only Use JFS on Data though.. I don't see the need to use anything else honestly..
I agree with you, JFS is a tried and true low-overhead file-system.
i got insanely goot battery w/ EB-Productions Kernel #2.
I wonder what the battery life is like on the A7/A8 kernels. i might have to try them out. (right now running TW kernel though, I love the work of both TW and eugene).
I'll have to compare battery of the TW kernel to the A8 kernel sometime soon.
are a7 and such overclocked like the one included in macnut? would be kinda sorta tight
Works great Eugene, thank you. Just a heads up - the external sd mounts as a protected cd drive and you are unable to copy to and from your computer. I'm using kernel A8.
Thanks for the kernels Eugene!
Whitehawkx said:
Works great Eugene, thank you. Just a heads up - the external sd mounts as a protected cd drive and you are unable to copy to and from your computer. I'm using kernel A8.
Click to expand...
Click to collapse
If you not using Macnut R12 likely will Happen... You have to edit the Vold.fstab to fix it..
Regarding OC / UV..
A7 & A8 is not OC nor UV.. I am however Working on those currently.. Easy enough to do..
would it be possible to add a no-RFS advanced EXT2 option?
thx
scrizz said:
would it be possible to add a no-RFS advanced EXT2 option?
thx
Click to expand...
Click to collapse
I could be wrong but I don't think Eugene plans to add lagfix options to this kernel. The advanced lagfix options are ported from the ULF Galaxy S kernel. But like I said I could be wrong...
One bug I noticed with this kernel is if performing a backup with ROM manager or any time you reboot from recovery, the phone just hangs on Galaxy S splash screen with no activity. It boots right up after a battery pull though.
eugene373 said:
If you not using Macnut R12 likely will Happen... You have to edit the Vold.fstab to fix it..
Regarding OC / UV..
A7 & A8 is not OC nor UV.. I am however Working on those currently.. Easy enough to do..
Click to expand...
Click to collapse
sweetness.. just flashed A8 overkill... and WOW! i cant wait till this is overclocked again!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DuH!! As Hommer Says... Fixing the GPS Screw up now.. Opps
~Eugene
Okay, 2 new Versions will be Replaced in the OP... GPS should be Fixed now...
Once I confirm it, I'll be adding in the OC/UV Mod in the Kernel.
Read more: http://eb-productions.proboards.com...ard=samsungsgs&thread=28&page=4#ixzz15gOIkAoA
htcfresh said:
so let me see if i got this right!?! you took someone else's work, did nothing to make it better, and managed to break the gps....
fix the gps issue and oc it and i'll forgive...hell i'll even donate!!!
Click to expand...
Click to collapse
I truly don't understand why it seems ppl are always giving Eugene ****. He does this as a hobby and is nice enough to share with everyone. Thanks for everything Eugene. Don't let the haters get you down. There are a barrage of ppl who appreciate your work. Keep it up!
A9 & A10 now Posted With GPS Fixed... Adding in the 1.2 OC/UV Mod now..
I'm just Super Happy I found what was causing the Battery Drain, remember I'm no kernel guy, so this takes alot of trial and error on my Part & the willingness of people posting Bugs
Both links appear to be for the same file on multi-upload.
And THANKS!!!!!!!!! You put in super hard work. Can't wait to flash these with R12.
Sent from my GT-I9000 using XDA App
qreffie said:
Both links appear to be for the same file on multi-upload.
And THANKS!!!!!!!!! You put in super hard work. Can't wait to flash these with R12.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I noticed that too. A10 link is still A9
i flash A8 and erase internal sd now im receiving a system data full and i lost all my paid apps that were installed on the phone. just to be sure,now i have to use odin back to sock and start all over again right?
[KERNEL]☆Jame Bond☆NS+NS4G w/BLN,ext4 & full voodoo (cm7-1.5.9,stk-1.5.9)
thread closed by me. see this post
·:*¨¨*:·..·:*¨☣☆Jame Bond☆☣·:*¨¨*:·..·:*¨
straight from The Land of Smiles
These kernels all run at 1ghz do not use setcpu or profiles!
additions include- voodoo sound♫, voodoo color and has ext4 optimizations (thanks supercurio)
benchmarks in quadrant will be 600+ over the 'stock' kernel owing to the ext4 mount mod
enjoy
Thanks to Neldar and Morfic we now have BLN (back light notification) for the Nexus S
-now thanks to Akent, bln is working on the 9023
-thanks to Netarchy as well for some clarification
-all kernels are "Sabai" Uv for incredible battery life
read about voodoo sound optimization HERE
read about ext4 speed improvement HERE
get the Voodoo control app HERE
better yet support the voodoo project with the donate app HERE
get the BLN control app HERE
for added functionality support neldar with the PRO app HERE
>source
instructions flash rom-reboot-then flash kernel
*note- if you haven't flashed any other kernels then just flash from recovery as long as you have rebooted at least once
*setcpu is not recommended for this kernel, underclocking/profiles will decrease battery life
**(stock rom)..if you are not coming from a stock kernel then go to system/etc/init.d and delete
([ S_10mountfix ] and [ S_99complete ] for morfic) and ([99nexusunit] and [placeholder] for netarchy) then go to system/ and delete the modules folder. then flash og kernel
note- all kernels have ext4 mount mod, voodoo sound, and bln
☢downloads☢
⇒note-2.3.4 roms only
cm7/any kernel
the ☆Jame Bond☆ sabai dee®
stock (rom) kernel
the ☆Jame Bond☆ sabai dee®
-amazing speeds!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks ogdobber. its not my flavor, but im sure lots will be using this kernel
Excellent man, thanks for posting this.
time to submit to CM This really should be the stock kernel used in CM7 until someone can update the prebuilt kernel with something that can be used stably for 95% of NS users
Very nice to have options. Thanks
Sent from my Nexus S using XDA App
simms22 said:
thanks ogdobber. its not my flavor, but im sure lots will be using this kernel
Click to expand...
Click to collapse
your welcome guys. Simms, I would have to make you a 1800
ogdobber said:
your welcome guys. Simms, I would have to make you a 1800
Click to expand...
Click to collapse
.......
Good stuff, thanks.
Will this work on all nightlies, or we need to a get a new one for each release?
Thanks.
AndyCr15 said:
Will this work on all nightlies, or we need to a get a new one for each release?
Thanks.
Click to expand...
Click to collapse
yes, it will work for all nighllies
Well that makes life much easier then! Muchos grassy ass!
i'll give this one a go when i flash tonight's nightly. thanks
I use CM7 #34 with Netarchies 1.2.2 on 1.3 Ghz
I would try this kernel tomorrow with the next Nightly...
Will i have to do more as flashing the next nightly and then this kernel to get ext4?
Or will I have to format the sd-card for ext4?
Thanks, Duffy
Duffy said:
I use CM7 #34 with Netarchies 1.2.2 on 1.3 Ghz
I would try this kernel tomorrow with the next Nightly...
Will i have to do more as flashing the next nightly and then this kernel to get ext4?
Or will I have to format the sd-card for ext4?
Thanks, Duffy
Click to expand...
Click to collapse
the ext4 "mount" hack is included with this kernel. flash rom - reboot - then flash this kernel
if you want to see the speed difference from the ext4 hack in the kernel run some quadrants first, then flash the kernel from recovery
the sd-card ext4 mod (different) can be very dangerous if you don't know what you are doing so I don't recommend it
Is putting the smartass governor in this out of the question?
Nexus S
Unfortunately this kernel breaks bluetooth.
jlevy73 said:
Unfortunately this kernel breaks bluetooth.
Click to expand...
Click to collapse
whoops...link will be down until I fix. thanks for the info
bluetooth now working. thanks for pointing that out jlevy sorry to anyone for the inconvenience
Thanks, works great now.
was waiting for this from you, cheers.
Excellent. Finally enhancements you can use without the useless instability of O/C. Thanks!
Edit: Crap, BT still broken for me. Same deal. Turns on but won't pair. I may try a clean install but that was disapointing.
Base on GT-I9000_OpenSource_GB_Update kernel source, I managed to compile some compatible kernel modules for Samsung Galaxy Ace XXKPH (2.6.35.7-perf-CL260130): btrfs.ko, cifs.ko, ext3.ko, ext4.ko, jbd.ko, jbd2.ko, libcrc32c.ko, and tun.ko . I am forced to use the HTC Dream (aka trout) platform, so the compiled modules compatible with armv6 processor (I9000 using armv7). Dirty hack here and there, so I am sure the generated zImage will not work on SGA, but the produced module is fine.
Sorry, my English not good enough
ketut.kumajaya said:
Base on GT-I9000_OpenSource_GB_Update kernel source, I managed to compile some compatible kernel modules for Samsung Galaxy Ace XXKPH (2.6.35.7-perf-CL260130): btrfs.ko, cifs.ko, ext3.ko, ext4.ko, jbd.ko, jbd2.ko, libcrc32c.ko, and tun.ko . I am forced to use the HTC Dream (aka trout) platform, so the compiled modules compatible with armv6 processor (I9000 using armv7). Dirty hack here and there, so I am sure the generated zImage will not work on SGA, but the produced module is fine.
Sorry, my English not good enough
Click to expand...
Click to collapse
So what do you want us to do?
Do you have screen shot on your own?
No screenshots. Examples of the use of cifs.ko, you can find here. Examples of the use of ext4.ko, you can find here.
how to flash it?
No need to flash, just copy files into /lib/modules (ex. using Root Explorer with root privs). Or could someone prepare update.zip for recovery?
I wonder if ext4 module works
i tried pushing this into
/lib/modules
is this what you mean?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is this the new kernel?
it is an SGS based KERNEL..
so we can use it and do overclock
With this kernel can i do overclock ???
still cant overclock.
this kernel does not do it.
Its only modules guys. You cant do overclocking etc. Because its not kernel its only a part of kernel.
Sent from my GT-S5830 using Tapatalk
To access your Windows/Linux Samba share:
1. Copy cifs.ko module to SGA microSD.
2. Using "adb shell", Terminal Emulator, or ConnectBot:
Code:
su
mount -o remount,rw /dev/stl12 /system
busybox cp /sdcard/cifs.ko /system/lib/modules/
mount -o remount,ro /dev/stl12 /system
exit
exit
3. Install CifsManager from Market.
4. In CifsManager's Settings page tick "Load cifs module" and "Load via insmod", CifsManager autodetect cifs.ko location.
5. Open About page, click Modules button. You will see cifs module listed if loaded successfully by insmod.
6. Add your network share in Add New Share page. Using cifs.ko and CifsManager, I can access my Windows share drive over Wi-Fi.
My ext3, ext4, and btrfs modules could be useful for firmware modder and advanced user. CODEROM is the first ROM using my ext4 module. Dark Tremor a2sd not a perfect script without journaling filesystem support
You need tun.ko module if you need vpn access. Don't ask me about vpn since I'm not expert about it.
Sent from my GT-S5830 using XDA App
yeap... it's working on my Ace with KPH not modifying fw. Thx. How to use other modules?
so what improvements have this part of the kernel?
vlc_marcos said:
so what improvements have this part of the kernel?
Click to expand...
Click to collapse
Some parts of kernel not compiled-in by Samsung, so compile the missing part as module is the solution. The improvements is now you can access Windows/Samba share, access ext4 partition, and vpn access.
Phuih, 158 downloads but I have 3 thanks only? Maybe I have to delete this unuseful post
that's not a useless post at all !!!!!! You guys, posting those things on this forum, are making the Ace a wonderfull phone! Thanks a lot... Take my thanks like 10000
@mr. ketut I already gave you cendol...
I think it would be nice if you collaborate with mr. code to equally develop a very powerful ROM for ace
btw I saw you post something on another forum but I have not seen it here?it's same or different?
nice work ...thanks a lot. I am sure more kernel modules can be compiled. Is it possible to compile overclock.ko for galaxy ace ?
ketut.kumajaya said:
Some parts of kernel not compiled-in by Samsung, so compile the missing part as module is the solution. The improvements is now you can access Windows/Samba share, access ext4 partition, and vpn access.
Phuih, 158 downloads but I have 3 thanks only? Maybe I have to delete this unuseful post
Click to expand...
Click to collapse
No way this is a useless thread.....
Sent from my GT-S5830 using XDA App
Hi all,
I present you superatmos kernel for ICS. Its built using ICS kernel sources released by samsung.
NOTE: *** WORKS ONLY ON SAMSUNG BASED ROMs. DOESN'T WORK ON AOSP BASED ROMs LIKE CM9 and MIUI. ***
DISCLAIMER: I don't bear any responsibility if you brick your device flashing this kernel. Flash it at your own risk.
Instructions for flashing:
Download the tar file from the link given below.
Flash it using Odin.
Download Link:
BETA VERSIONS:
SuperICS Kernel v2.0.1 (Everything works except bluetooth. Almost stable release.)
SuperICS Kernel v1.0.3
STABLE VERSIONS:
SuperICS Kernel v1.0.2(Thanks to incarnation95 for testing)
SuperICS Kernel v1.0.1 (Thanks to yogisays09 for testing)
Kernel Features:
Built from ICS kernel source released by samsung
Clockwokmod Recovery 5.5.0.4(v1.0.2)
CWM Touch Recovery 5.8.1.5 (v1.0.3)
Added a lot of governors and I/O schedulers(letting users decide which combination is better for them)
Faster memory read and write operations
Misc tweaks for faster I/O access and battery saving
Completely CF-root compatible(CWMManager.apk auto install) (Credits and THANKS TO Chainfire.)
Disabled MMC_CAP_ERASE capability flag (Thanks and Credits to codeworkx)
efs partition backup(you can find the backup in /data/superatmos folder)
Custom bootanimation(copy bootanimation.zip to "/data/superatmos" folder and reboot) and Custom bootsound(copy "PowerOn.wav" to /data/superatmos folder and reboot). (superatmos folder can be seen now in /data once you flash the kernel)
init.d script support (put your boot scripts in /system/etc/init.d or /data/etc/init.d folder)
Additional modules support (copy your .ko files to /system/lib/modules or /data/lib/modules and reboot)
Custom boot scripts support (copy your custom boot scripts to /data/customboot.sh and reboot)
Improved kernel performance.
CIFS module added
FUSE and NTFS file systems integrated with kernel
VERY STABLE
Kernel Source: HERE
Credits: I would to like to say thanks and give credit to all people who directly or indirectly helped me technically to become what I am today. Special thanks to Chainfire and codeworkx. They are just awesome and great inspiration.
Screenshots: (Courtesy: incarnation95)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
test ker
[email protected]
Thank you!
I would like to test your SuperICS kernel.
I would like to test your SuperICS kernel.
Check your PM.
Rdy Tor testing this !
[email protected]
Sent from my GT-I9100G using xda premium
Lets rock ......
Sent from my GT-I9100G using xda premium
Looks like kernel is working fine.. will try to add few more tweaks/optimizations and release it.
are there governors included such as abyssplug?
iXanza said:
are there governors included such as abyssplug?
Click to expand...
Click to collapse
Will try to add in the first version.. if not in the next one
willing to test!
this kernel got loop back device support...cos i wanna use linux on my G.. :O
time to boost!!!
Waitin fr tge release... Gnna be awesome B-)
Sent from my GT-I9100G using Tapatalk
I would like to test too
Gesendet von meinem GT-I9100G mit Tapatalk 2
i wan to test for u oso..can i?
SuperICS kernel v1.0 released
Hi all,
SuperICS kernel released. Check the OP.
Please test the kernel and reply the feedback/bugs here.
Also it will of great help if someone can provide screenshots of About Phone in settings and of CWM app.
Thanks to all my BETA testers.
hey superatmos,does this kernel got loop back device support..???
Hey, does this Kernel improve the 3D Performamce, that we can get as same fps as in CM 9?
Gesendet von meinem GT-I9100G mit Tapatalk 2
Hariiii said:
hey superatmos,does this kernel got loop back device support..???
Click to expand...
Click to collapse
In the defconfig, loopback device support is enabled by default.
please keep track to the original Franco's patch too.
the patch implemented here only for the color fixing and for faux speaker's patch (v3.2).. that's all. so i'm not sure if your phone reboots etc.. i will try to update with franco's update for the new release.
r209 - CM11
download
Previous releases:
r208 with rootfix - CM11
download
r205 - CM11
download
r204 - CM11
download
r204 - CM11 (with Wheatley governor)
a friend requested to put Wheatley governor.. so I just share this to you as well.. any other request will not be entertained hehehe
download
r204 - CM11 (with Wheatley governor and Faux 3.0)
download
turns out Franco also committed something on the sound control hence I can't put the patch directly.
I reverted his commit and then I put Faux's 3.2 driver (3.0 don't need that commit reversal)
this is with Faux 3.2 ... [CLICK HERE]
r203A (testing) - upgraded to kernel 3.4.82
AOSP : download
CM11: download
r203
download
r202
download
r201
download
download r201 with ziddey's script/zipfile
r200
download
I have put enormous time testing and compiling these releases.. if you are happy with I am doing, consider donating to my Paypal
XDA:DevDB Information
franco-gombak kernel, Kernel for the Google Nexus 4
Contributors
mnajem
Kernel Special Features: CM11, Faux patch
Version Information
Status: Testing
Current Stable Version: never
Current Beta Version: always
Created 2014-01-01
Last Updated 2014-07-03
Reserved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved
downloading now... thanks a lot
is governor bug present?
P.S.
dev console doesn't work with old board themes, you should post some mirrors
file
provolinoo said:
downloading now... thanks a lot
is governor bug present?
P.S.
dev console doesn't work with old board themes, you should post some mirrors
Click to expand...
Click to collapse
you are referring at my github, yes?
I am planning to revert them as these patches (governors) are non usable (conflicted) with the original Franco's code (since Franco seems does not have much interest on more governors). So I just disabled the governors during the compilation process.
Faux 3.0 upgraded to 3.2
Faux Upgraded to 3.2
Please check thread #1
Gombak? What strange name haha..
It's a name of a place in Malaysia lol
Sent from my Nexus 4 using xda app-developers app
any comment regarding the kernel? success/failure stories whatsoever.
mnajem said:
any comment regarding the kernel? success/failure stories whatsoever.
Click to expand...
Click to collapse
After sideloading the kernel, it causes the DSP Manager, NFC Service to FC.
arifhazwan said:
After sideloading the kernel, it causes the DSP Manager, NFC Service to FC.
Click to expand...
Click to collapse
do you use original CM 11 or Nexus 5 experience mentioned above or CM based ROM?
it'll not work on other CM based ROM except those two..
Sent from my Nexus 4 using Tapatalk
arifhazwan said:
After sideloading the kernel, it causes the DSP Manager, NFC Service to FC.
Click to expand...
Click to collapse
Same for me cm11
djdeeles said:
Same for me cm11
Click to expand...
Click to collapse
how about the interface, can you use it?
I realized I can't use Xposed.
not sure about the rest.
if so many problem I will stop the dev as I can't get enough patch(es)
I cant pass lockscreen full fc's
djdeeles said:
I cant pass lockscreen full fc's
Click to expand...
Click to collapse
hmm weird.
as I can pass the login screen and use it for several hours (same goes to my friend who test it here).
File updated.
No error during patch. so I think this one is OK.
Please refer first post
This kernel bootloops on incoming calls. Using your franco-r200 release
Sent from my Nexus 4 using Tapatalk
wow. that bad. ok. will put in known issues
Malaysia boleh!
Sent from my Nexus 4 using Tapatalk
aminroslan said:
Malaysia boleh!
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
if you don't mind please try