Hello all!
First of all, I would like to thank the entire XDA for all the help and great developers for all their hard work and everything! You're THE BEST REALLY!
I hope you could help me with my problem :/
A few days ago, I flashed a custom rom (i've changed a lot of them already and this has never happened to me before). After flashing the phone the android system worked perfectly fine but after rebooting, phone just keept (and still is) restarting every 3 seconds. I cannot go into CWM recovery, only into Download mode. I've tried flashing stock rom with odin and in the end when it says > Close serial port and wait until rebooting, phone just keeps rebooting again. (Black screen, flash for a second and then again reboot). I've found someone on YT who has recorded the same problem so that you would understand what am I trying to say.
Type SAMSUNG GALAXY ACE (NEED HELP IT WON'T BOOT!) into YT and you will see the problem. ( i cannot paste the link)
What could i do? Btw, i've searched the forums for solutions but i didn't find a single 1 that would help me I cannot do it even with odin
PLEASEE HELP ME
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
Hi! I think your rom (read only memory) got demaged so nobody can help you now
MeltingSnowman said:
Hi! I think your rom (read only memory) got demaged so nobody can help you now
Click to expand...
Click to collapse
Hello! So the only option would be to change the motherboard I guess?:/ Phone is in warranty unitil 17th of February but I don't know if they will repair it because I don't have stock rom on it anymore :/. I've changed many roms and the latest installed is CM10. Do you think that they will see which ROM and other stuff is on if It doesn't even boot? Is there a change that I could format the intrernal storage to cover up my previous installations? (hope you understand what I am trying to say)
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
I understand what you mean, don't worry I think you should try the recovery procedure to unbrick the Ace as last thing you can do to use it back again. If EVRYTHING you can do (or you want to do) doesen't work send your device to service and hope that Samsung repair it for free because covered by warranty. Probably they will never know what you've done on it because memory is demaged. Some time ago I was too lazy to flash an original stock rom and I could not find the one I needed on the web so I sent my device to service with CWM on and no rom (formatted partition) and got it back with stock rom for free (was in warranty time). Best whishes
Inviato dal mio GT-S5830
Ok was afraid that you wouldn't hehe Yea well I tried like 10 times already with Odin but the problem is when Odin is kind of finished and it's time for phone restarting, phone just gets into a bootloop again (or how is it called). So I don't know :/ Maybe I need a new boot file? I can only enter download mode but unable to enter any recoveries modes although I have CWM. Ok I hope so, will probaby take it to the service tomorrow. Btw, do you know any other recovery procedures besides Odin? And thanks a lot for replying to my problem
If you have download mode still try kies to see if it will flash stock again
Sent from my GT-S5830
Ok thank you! Haven't tried that yet. Gonna try it right now.
Or try a different rom downloaded for xda and reflash, sometimes some roms get corrupted
Sent from my GT-S5830
Tried to use KIES but it says that the phone is unsupported :S Could the problem be that I'm using Win8? I've tried other roms already but I think that MeltingSnowman is right, it's damaged and I guess it's only fixable at service.
Nothing to do with win8 really and what method are you using on odin ? One package method or are you using all options
And try using a diff sd card as i had a damaged one that effected my flashing a while back
Sent from my GT-S5830
Oh ok I just thought that the compatibility could be the problem. I'm using one package method because I cannot find other single files :/. I've serched google already but all I ever found ware one packages. Sd card is fine. Do you maybe know where I could find single files? Please don't think that I am lazy but I really haven't found them
Your single files are in your rom you already have downloaded you just untick one package then apply them one by one which rom are you trying to flash ?
Sent from my GT-S5830
I've downloaded some stock 2.3.6 from SamFirmware but it's only 1 file (.tar )S5830DXKT7_S5830OLBKT3_S5830DXKT5_HOME.tar.md5.
It most likely to be a corrupt file, iv heard all sorts of stories from that site, find a stock rom on here thats flashable through odin and try your one package method again and also download the cooper ops file again, if you go to stickies at the top of this forum you will find what you need and hopefully get your ace to boot up again
http://forum.xda-developers.com/showthread.php?t=1034145
Sent from my GT-S5830
R: Bricked ace keeps restarting (cannot go into recovery/CWM)
1) Kies can't flash firmwares because you need an operative phone connected to PC and if you have anything different from stock rom on your mobile will obiviously say "Uncompatible Device", no matter wich SO you're running
2) A corrupted file from internet is almost impossible to get
3) A demaged bootloader would cause bootloops so if someone knows a way to load a new one to your device you'll be alright
4) One package or 100000 files can't cause a demage like that so the problem is sure not that
Inviato dal mio GT-S5830
Why cant there be a corrupt or faulty file ?
Sent from my GT-S5830
Didn't find any of these files. :/ Only ZIP files which are, If I am not mistaken, only supported by CWM.
MeltingSnowman said:
1) Kies can't flash firmwares because you need an operative phone connected to PC and if you have anything different from stock rom on your mobile will obiviously say "Uncompatible Device", no matter wich SO you're running
2) A corrupted file from internet is almost impossible to get
3) A demaged bootloader would cause bootloops so if someone knows a way to load a new one to your device you'll be alright
4) One package or 100000 files can't cause a demage like that so the problem is sure not that
3) I already tought of that but I couldn't find a way to install it, nor the bootloader itself. Hope some1 could provide this.
Click to expand...
Click to collapse
Did you download the coopers ops file again from the link i sent you and try and get stock XWKTR firmware from samfirmware site i flashed it today and im currently using it and put your phone in download mode and try and flash again ill keep looking around to see if i can help you further
Sent from my GT-S5830
---------- Post added 24th January 2013 at 12:03 AM ---------- Previous post was 23rd January 2013 at 11:56 PM ----------
Here is a link for cwm recovery via odin http://forum.xda-developers.com/showthread.php?t=1465599
Sent from my GT-S5830
Still can't access CWM. Bootloops continue. I don't know what to do anymore. I've tried almost everything really. Will probaby sent it to repair tomorrow, I don't see any other option :/
Related
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
looks like the pic didn´t upload succesfully
I have no idea what you are doing . How did you set up Odin? did it detect your phone? Have you closed all Kies applications? You could post a link to the thread you got the download from... (Did you ask the thread where you got the download from?) Why is there only one file? Is it meant to be like that? (I know some roms can be zipped/tarred so you only need one file but is this that sort of file?)
The list can go on and on. Please provide more information... What is the status of your phone now? Can you boot up to your home screen or are you stuck at soft-brick screen? I ask this because i don't understand what safe means. I would consider a soft brick safe because i know what to do when i have one... Re-flash!
So to that image. I am assuming this is how you set up odin BEFORE you connected your phone. I would suggest tick re-partition, this WILL factory reset your phone. A suggestions not always necessary, read the thread. If you are on GB already then i don't think you need to. Also usually you are still required to have a .pit file. (I haven't flashed via odin in a long time, so things may have changed) Check you don't need one.
Finally sometimes when i flash via odin, it get stuck i think at the same point you do. I have to unplug and take battery out. If i boot up i get two symbols with a line of some sort in the middle. In this case i go back to download mode and re-flash and it flashes correctly this time.
Sorry for the long message its just the more information the better and quicker people can help. Hope i helped, if not please provide as much information as possible
domi525 said:
looks like the pic didn´t upload succesfully
Click to expand...
Click to collapse
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
I just rebooted it normaly, it isn't bricked or anything like that...
Thanks!
Sent from my GT-I9001
Gusta_HR said:
Go back here http://forum.xda-developers.com/showthread.php?t=1581193&page=21 and repeat a question. You didnt setup ODIN right...
Click to expand...
Click to collapse
Ok thanks!
Fala
Sent from my GT-I9001
So everything sorted?
Talon26 said:
So everything sorted?
Click to expand...
Click to collapse
yep
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Eirik2306 said:
Hello, ive got the same problem so what did you really do to fix the problem, change the odin version or what??
Click to expand...
Click to collapse
Search for the flashing tutorial under 9001 software development
Sent from my GT-I9001 using Tapatalk
domi525 said:
So a few hours ago, i tried to flash the value pack (XXKQB) ROM on my Galaxy S Plus,it started normally but sort of freezed on ˝setupconnection˝
The phone was still in download mode,and after about 20 minutes of siting there,restarted the phone since nothing was happening, and it´s safe (for now ).
It should look like this,right?(see attachment)
__________________________________________
WRONG VERSION OF ODIN heh,silly me
Click to expand...
Click to collapse
Replace Odin, and install the files as in the screenshot, the debug mode on the phone, turn off your phone, enter in the flashing mode after 3 buttons.
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
kunalteji1993 said:
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
Click to expand...
Click to collapse
I have no experience with this, but I did keep this video link on how to put a bricked Samsung into download mode just in case I needed it. The usb jig is the same for both the captivate and the Note from what I have read:
http://androidforums.com/captivate-...ung-captivate-usb-jig-video-start-finish.html
If you are able to enter download mode then Just try with different version of PC Odin , like V1.83, V1.85, V1.87. and do not worry about Stock ROM you can always download it from below link.
http://forum.xda-developers.com/showthread.php?t=1329360
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
kunalteji1993 said:
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
Click to expand...
Click to collapse
I fear your Note is done for, if your PC Odin session got interrupted.
chasmodo said:
I fear your Note is done for, if your PC Odin session got interrupted.
Click to expand...
Click to collapse
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
kunalteji1993 said:
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
Click to expand...
Click to collapse
Dont take it service centre.If you do so also dont say them you flashed custom rom.Then they wont fix it under warranty.Dont worry now.
Try different usb ports,uninstalling drivers and reinstalling it and try again.And as you are noob I recommend not to flash ICS customs at the moment.Stay with GB
I say go to your friend first who rooted your phone then ask him to try the various methods given in the forum recovering from softbrick.
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
kunalteji1993 said:
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
Click to expand...
Click to collapse
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
vijai2011 said:
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
Click to expand...
Click to collapse
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
kunalteji1993 said:
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
Click to expand...
Click to collapse
its a kernel with a custom recovery.Its like CWM(Clock Work Mod).You could find it in the development section.Download the kernel.Could you get into recovery mode by turning off the phone,holding "vol up+home button+powerbutton"?
---------- Post added at 09:08 AM ---------- Previous post was at 09:00 AM ----------
kvsandeepreddy said:
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
Click to expand...
Click to collapse
No need for jig because he can enter DL mode.And did using jig removed the yellow triangle for you
thanx guys for helping and current updates ---
i am in 12 th so untill my entrance exams are over i won't get to have the phone in my possession since my dad has it now ... so maybe after they are over i will continue on my quest to get it corrected!
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
how did you fix it? this may help some else in the future
ratcom said:
how did you fix it? this may help some else in the future
Click to expand...
Click to collapse
service centre guys....remember he/she saying in pm
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
wenn connecting to Kies at firmware Kies says something like LC1. lb2 (XXX) as product code? if so they have changed the board on the service center and they haven't activate the Pcode on your phone google "Pcode not active" you will find few posts till now only ppl from Germany had it who send their phones to service center via Saturn/Media Markt ist guess it was/is a technician you was sleeping on the seminare/briefing how to change the board on Note. hope it will help you if it is that try to replace your phone, had the XXX Pcode after service center got a replacement. after a month of arguing with the salesman.
Sent from my GT-N7000 using Tapatalk 2
Uninstall the Odin in your PC and install it again to see if it works.
i am pretty much sure that they didn't change the mother board. they must have added the firmware that's all as my mboard wasn't damaged at all , it was just that the battery failed when i gave it to samsung people that's why my phone overheated when they charged it and that's when the battery must have been destroyed maybe due to that overheating they must have thought to change mboard (but they didn't cause those engineers must have changed the battery prior to examining my phone for the problem). AND i didn't have pc odin on my THIS pc to start with. it was in my laptop and kies didn't even reckoned my phone there well that's why i installed kies on HERE . i guess service center people can update it the same way they installed this firmware here..... what do u suggest?
AND Braxos Pcode is active --- it's something :
GT-N7000ZBAINU
and no, the current firmware info kies shows is something like ---
N7000DDLC1/N7000ODDLC1/N7000DDLC1/N7000DDLC1(INU)
(now i think they have done something wrong - it's all n7000ddlc1 here. what is this? )
GUYS can u also tell me what does your firmware version shows (just for reference , pls do it!)
p.s my phone is still in warranty since they fixed my phone free of cost plus they also replaced the battery for free . before my phone was sent to service center my phone had a flash count of two yet they fixed it under warranty(yay!).And thank you everyone!
MY ADVICE TO NEWBIES----
If your phone is soft bricked and you don't know what to do and you think you will make the matter even worse then don't do anything to permanently brick it . you guys should go to service center , they might even fix it for u for free just like they did it for me!
Hey guys, ok so im superrrrrrrr new to this. Iv had an iphone and blackberrry half of my life and im just getting into the android world.
Point of the matter,
i have a galaxy ace, s5830m
just bought it a couple days ago here in venezuela
and everyting was running smooth, i really liked everything
since i sort of know about jailbreaking and all that stuff from having an iphone
i started reading up on how androids worked and managed to root my phone with out a problom
being that im a custom fanatic, i figured i wanted to update my gingerbread os to a ics using a custom rom from
cm9
this is what i did...
I downloaded the zip cm9 file,
loaded it into my sd card
went into recovery mode
and clicked update from sd card (totally forgot to clear cache and wipe/factory reset) as it was stated in the guide i was reading..
Anywhoo.. The instalation of the rom went fine, it said it installed correctly and with no errors
so i rebooted the phone, afterwards as it stated on the guide and boom!
Bootloop...
the phone is stuck on the samsung galaxy ace s5280m screen and wont finish booting up
iv left it like that for more then 30mins and nothing! Iv done several batter pulls and reboots and nothing
i went into recover mode and tried clearing cache and doing the wipe and rebooting again
but nothing! Its still stuck in the loop!
I did some reading and figured id load a stock firmware using odin hoping this would fix the problom
so i downloaded the latest one from my country from sammobile
downloaded the drivers
the cooper_v1.0 file
downloaded odin v4.38
did everything as the guide said but now odin isnt wanting to work,
i opened it as a administrator, i loaded the cooper file,
but when i want to load the single tar.md5 file..(the firmware)
it totally crashes on me, iv tried several times and it always crashes at the same point
iv tried on 3 diffrent computers and iv tried diffrent odim versoins and it always crashes at the same place!
This is when i started to worry, so i downlaoded samsung kies, to see if i can do a firmware update from there thinking itd be more reliable but now my computer doesnt want to reconize my phone
i can enter both download mode and recover mode having only the clear cache/factoryreset/and reboot options available.. Im really freakeddd out being that i just got this phone, and i feel pretty stupid i should have never done anything to the phone...but if anyone could help id really apreciate it!
Im desperate and i dont want to take it anywhere, cause im in venezuela at the moment
and i dont want to end up paying another dude a bunch of money to fix something that cud be fixed with some easy steps.
So any help is great!
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
hmm
121C4 said:
I think that:
The s5830M is the same as s5830i
The s5830M is NOT the same as s5830
That might be your problem. I may be wrong but it's worth looking up.
If I'm right you will need to change Cooper file for correct one for your device. Also correct ROM too!
If I'm wrong, then, sorry.
Search more before you take any action. If you can get into download mode it can usually be fixed the way you are doing it but with correct files.
Click to expand...
Click to collapse
Ok i can look that up,
i kind have the same feeling,
being that the models are always divided as such..
So your saying (if this is right)
i need to find the Cooper File for s5830i
AND the ROM
and Odin should work after that?
The thing thats worrying me, is that all odin is doing is crashing on me,
but im going to look for another cooper file
being that the rom is especifcally for s5830M already
thanks for your fast response
im going to try this and get back to you...cause i really want my phone back D:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
ok
dxppxd said:
You need odin 1.85 i think, not sure.
And yes, 5830i and 5830m are compatible, but roms for 5830 and 5830L can brick your device.
Click to expand...
Click to collapse
ok so i did some investigation
after you told me about the models not being the same and ur right
i and m models are the same
and they only work with odin 1.85 as yu just said
and supposedly
only full package roms work not one package roms
and as i kepted reading in a spanish form,
there arent any ICS custom mods availbale for the M series
the only roms they run are the original stock roms.
so i guess i can forget trying to load a custom ICS rom into it
if this all works as the spanish forum explained
ill get back and confirm everything
ok so i have everything ready now,
but now my pc doesnt want to read my phone wile its on download mode
it will only read wile its on boot loop mode
and the only thing that happens on odin
is that it says ADDED!! (wile on boot loop mode)
but it never says my phone is reconized like its suppose to..
and when i click start.. nothing happens..
anyway to get my pc to reconize my phone on download mode?
or am i doing something wrong?
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
121C4 said:
Maybe ask on the 5830i general thread?
I don't have the same phone as you so I don't really know what too suggest besides asking other people with the same phone as you.
Click to expand...
Click to collapse
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
JuniMatos said:
i actually finally got odin to reconize the phone,
i uninstalled keis and installed the samsung drivers alone..
and got it to work
but now i have another problom!
(when will this stoppppppp)
when i finally have everything setup on odin,
and i click START
some movement happens
and then my pc restarts on its own by itself?...
:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try on another pc. Dont give up!! There will be a solution
Sent from my GT-S5830 using xda app-developers app
After installing JellyPlus and Cor Plenus kernel on my Galaxy Mini for program compatibility, I find the rom a little unstable, and wish to retun the phone to its origional status
Using CWM to load new rom gives error of there not being enough room on the device
Using Odin downloader, either the phone is not recognised, or the operation works, but sends the phone into boot loop, depending on the version of Odin I use
Using Kies, well, my phone is not 5570 any more, but a 5360 which is not supported for firmware upgrade
I am computer literate, Pc, Tablets, Windows, Android etc - No, I only thought I was
I have tried many things, and do not see how to revert the phone to factory (ie GT-S5570I STOCK ROM from its current status of GT-S5360)
Please, please help. I am happy to take a big kicking if this is easy, obvious, or many times previously covered - a push in the right direction would be greatly appreciated
Thank you, Paul
If you have bootloop, wipe data from stock recovery. And as I read read your post, you flashed Mini Plus ROM and kernel! So be happy, that your phone works!
Sent from my GT-S5570 using xda premium
no he flashed a galaxy y rom on his mini plus
lol
now what you can do is boot into recovery and wipe everything except sdcard from mount and storage option (do not format sdcard) then flash a custom rom meant for mini plus and then try to flash a stock rom through odin
dheeraj (dhlalit11) said:
no he flashed a galaxy y rom on his mini plus
lol
now what you can do is boot into recovery and wipe everything except sdcard from mount and storage option (do not format sdcard) then flash a custom rom meant for mini plus and then try to flash a stock rom through odin
Click to expand...
Click to collapse
Same thing lol
Be happy, it still works!
Sent from my GT-S5570 using xda premium
What I did.!
My phone was a GT-S5570I
I flashed the following, thinking that it was for my phone - see last bit?!
[ROM][KERNEL][ICS/JellyBean mod] JELLYBLAST V3 for Galaxy MINI/POP PLUS [GT-S5570i]
I am grateful that the phone still works, and very grateful to all of you who have replied
What I would like to know is how to enable enough free space on the phone so that I can flash back to stock 2.3.6 (as it was when I bought it)
should I pretend that it is a pop plus now, and look for solutions from there?
The 'trasto' has let me flash once again to the above rom / kernel, but often I am stuck without carrier - emergency calls only. Other than hat, it works very nicely!
hmm try to flash a kernel made for ur device , coz the kernel has the main properties of ur device for kies to detect, tat shud be ok,wont be requiring much space for kernel flashing i suppose :good:
btw there shudnt besuch errors, the updater script is acually set to swipe everything out b4 cpying the new files into ur rom
or else flash a custom rom, its easy tat way
just flash a firnware through odin
dheeraj (dhlalit11) said:
just flash a firmware through Odin
Click to expand...
Click to collapse
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
rpaurey said:
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
Click to expand...
Click to collapse
Fix for bootloop: wipe data from stock recovery. Is it hard to read/search?
Tapatalk 2-vel küldve az én GT-S5570-ről
rpaurey said:
My phone was a GT-S5570I
I flashed the following, thinking that it was for my phone - see last bit?!
[ROM][KERNEL][ICS/JellyBean mod] JELLYBLAST V3 for Galaxy MINI/POP PLUS [GT-S5570i]
I am grateful that the phone still works, and very grateful to all of you who have replied
What I would like to know is how to enable enough free space on the phone so that I can flash back to stock 2.3.6 (as it was when I bought it)
should I pretend that it is a pop plus now, and look for solutions from there?
The 'trasto' has let me flash once again to the above rom / kernel, but often I am stuck without carrier - emergency calls only. Other than hat, it works very nicely!
Click to expand...
Click to collapse
rpaurey said:
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
Click to expand...
Click to collapse
Don't panic my friend ....
and YES, after upgrading to JellyBlast Samsung Kies recognized as 5360 ...
but everything is working well ..
I can backup / restore like normal phone ....
so why do u bother about that ...?
What I think is 5360 has the same hardware like 5570i ...
or maybe JellyBlast was ported from 5360 ... !!!!!
Here , your question is answered ...
U don't have to need the free space as flashing original FW doesn't need to put the file to phone ...
shwe said:
Don't panic my friend ....
and YES, after upgrading to JellyBlast Samsung Kies recognized as 5360 ...
but everything is working well ..
I can backup / restore like normal phone ....
so why do u bother about that ...?
What I think is 5360 has the same hardware like 5570i ...
or maybe JellyBlast was ported from 5360 ... !!!!!
Here , your question is answered ...
U don't have to need the free space as flashing original FW doesn't need to put the file to phone ...
Click to expand...
Click to collapse
Thank you, and .......... thank you!! I may be being hysterical, but main reason for wanting to go back to original is because the phone now often is stuck with emergency calls only. On rebooting I also sometimes get an Unlock Network screen (should I have unlocked the phone first? Hmm - I have read so much over the last few days that I am not too sure any more. Shall try flashing the original firmware cwm or odin, or both??!! Have you any views on the problems that >I have re the above posts? Kind regards, Paul PS sim works as normal in nokia phone
Hi Paul ...
According to your post I assumed that u have GT-S5570i like mine ...
I don't face any situation like you posted ...
The reason is may be ...
U didn't wipe the Dalvik cache
try wiping and see ...
And for the Network unlock screen ...
What I think is your country or region CSC code is different from the Jellyblast's default CSC code ...
in that case U need to know your original CSC code and need to change back ...
this is what I thought ...
all done and dusted
shwe said:
Hi Paul ...
According to your post I assumed that u have GT-S5570i like mine ...
I don't face any situation like you posted ...
The reason is may be ...
U didn't wipe the Dalvik cache
try wiping and see ...
And for the Network unlock screen ...
What I think is your country or region CSC code is different from the Jellyblast's default CSC code ...
in that case U need to know your original CSC code and need to change back ...
this is what I thought ...
Click to expand...
Click to collapse
Bueno, managed to find what I wanted (other than a functioning (for me!) 4.1.1 rom)
Phone back to original status, and only wasted 6 euros on a replacement sim which I didn't need!
Have located ´'stockrom+odin s5570i' zip - if anyone has similar problems can mail it to them
The zip has the PDA, PHONE(MODEM) and CSC all split up, and I zapped the BOOTLOADER as well, just in case
All as I want it, and at least I now know how to recover when I try a 422 Rom next time!
What a shame Odin not available for this phone in 'one packet option', and what a shame nothing like Nexus Root Toolkit for sgmini
Same problem
rpaurey said:
Bueno, managed to find what I wanted (other than a functioning (for me!) 4.1.1 rom)
Phone back to original status, and only wasted 6 euros on a replacement sim which I didn't need!
Have located ´'stockrom+odin s5570i' zip - if anyone has similar problems can mail it to them
The zip has the PDA, PHONE(MODEM) and CSC all split up, and I zapped the BOOTLOADER as well, just in case
All as I want it, and at least I now know how to recover when I try a 422 Rom next time!
What a shame Odin not available for this phone in 'one packet option', and what a shame nothing like Nexus Root Toolkit for sgmini
Click to expand...
Click to collapse
Hi, I have the same problem. Can you please send yours zip and instructions? For 5570 Odin not sees my phone and for 5360 See, but I do not know how to enter the pit. With it a little scared. I tried. Zip update, but everything just mods for 5570, which is now reports differently and therefore probably do not install via clockwork.
I play with it all day and google it to me a little laugh .. omg (when you have 20 tabs open and there is a mess).
Problem solved
So we solved the problem with rpaurey successfully. Odin really need to be right on the GT-S5570I and I think "I" even at the end.
Stock rom I had only a little English and other languages, but downloading Czech now. Thanks.
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
LordwinOfficial said:
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
Click to expand...
Click to collapse
I believe that kies has emergency firmware that you can use to revive your phone? Try that. What does it say when it fails in odin?
hello,
so you can still go into download modus?
try the latest recovery (2.7 if i'm correct...) and flash with odin.
then try to boot into recovery and reflash the latest mclaw (or any other) non stock firmware.
think about it that you have to unzip the odin firmware package you download from maclaws site ( i forgot it and got messing around 2hours ago.... also staring at the erro in odin and thinking W*F is happening :cyclops: but then i realized i need to unzip the package...
realy good luck.....
Hi
Odin flash pit file
It just says the big black FAIL in the red background where it's supposed to be PASS in the green background
Could you guys give me download links to the PIT files, TWRP and the firmwares so I could get the right ones please?
Thanks
LOOK HERE
(i8190_goldenxx.zip) is the pitfile for I8190 only and i8190N_goldenxx.zip for I8190N version
BUT: these are NO flashable files - extract them and choose xxx.pit in Odin.
MJ
Could you give me a link to the pit file please
Do you have a link to the firmware I should use because tys0n gave me one before which was the service firmware (like 1.29gb) but it wouldn't work for this problem
LordwinOfficial said:
Do you have a link to the firmware I should use because tys0n gave me one before which was the service firmware (like 1.29gb) but it wouldn't work for this problem
Click to expand...
Click to collapse
come on boy, it´s really easy to find it, but ok, it´s friday and weekend comes ...
Firmware
Look at the attached files in that post
to flash a pre-rooted, deodexed and zipaligned ROM try this one
MJ
LordwinOfficial said:
Hey XDA guys,
I've got an I8190N
I've got a pretty big problems and I need the help of your big brains.
Well a long time ago (17th September 2013) I posted a thread about a problem with my phone, when I booted up, it had this screen:
*Image should either be here or in the attached thumbnails*
So about 3 weeks ago from today I was trying to install a new CM11 ROM update from Maclaw but after I put the zip on my sd card and booted into TWRP recovery (2.6.3.0, just in case it needs mentioning), the phone shut off in the middle of the installation, I thought it was just the usual bugs I get whilst flashing ROMs so I tried to turn it on and it wouldn't turn on.
After a couple of attempts I finally realised that it's able to go into download mode only, I think that means it's soft-bricked right?
So I kept trying to re-install the stock ROM (unroot, unbrick etc) through odin but it kept failing.
I sent the phone to repairs and they wouldn't repair it (because it's rooted obviously, I thought maybe they wouldn't know but of course they did).
I obviously can't get a replacement and start over again because the warranty is void now that I've rooted it
So now they've sent it back and it's currently a paper weight that can go into download mode and refuses to install stock ROMs through Odin.
What do I do? I really need help guys (I don't need to worry about backups because I always backup)
Please answer soon, otherwise I'll be without a phone and my phone company will keep charging me for my contract eventhough I'm not using the phone.
Thanks in advance for any help given
Click to expand...
Click to collapse
You can go to recovery mode then by using three button combo
if its no working flash it from here using odin
Sorry, it's just not my day, phone breaks, gf breaks up with me because I didn't reply to her because my phone broke lol just ain't able to fix my phone myself like usual, I got a USB jig on the side just in case I need it if that'll be of any help? & Thanks for the links, appreciate the help
Fixed
Thanks guys, the phones fixed
Really appreciate all the help