I see there is a lot of people who post in here who dont know how to Flash JVU before Custom Rom with ODIN
Either they get the Red wipe error in Recovery or just arent sure on how to use it, hope this helps you...
THE TOPICS HERE ARE GUIDES ON HOW TO FIX OR USE :
RED WIPE DBDATA ERROR
FLASH JVU 2.3.6 BEFORE CUSTOM ROM
MANUALLY INSTALL CWM
FEAMOD RECOVERY INSTALL
FIX INTERNAL STORAGE ON GT-I9000M
FAILED TO MOUNT SD CARD (E: FAILURE IN RED)
COMPUTER NOT CONNECTING TO PHONE VIA USB
UPDATE TO CYANOGENMOD 10.
AND LINKS TO WHAT YOU NEED ......
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------
Red wipe error is because the problem is with the dbdata!
Install THIS FILE in the PDA section with ODIN and dont touch anything else!
DBDATA.RFS DOWNLOAD : If you need it
Open ODIN
Click the PDA button and choose the dbdata.rfs.tar file you downloaded
Make sure Re-Partition is unchecked
Boot your SGS into DOWNLOAD MODE
To do this : Hold down the Home, Volume Down and the Power button
Connect your device to your computer with the usb cable when in Download Mode
If your device is connected Odin will recognise it
Click Start in Odin and wait
When the process is completed your device will restart
No more dbdata errors!...
------------------------------------------------------------------------------------------------------------------------------------
HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
Samsung USB Drivers : DOWNLOAD MINE or LINK 1 : LINK 2
Needed to recognise Phone to your PC ... duh! :silly:
Reboot Computer once installed for changes to take effect :good:
Please do not attempt anything if you don’t know completely what it is.
If any damage occurs to you or your device, I will not be held liable ... you have been warned !!
If you arent sure ... just ask
FLASHING JVU ROM WITH ODIN v1.85
Why ODIN v1.85? ... I have not had any issues with it, plain and simple!
Use ODIN with PIT File
PIT File Incase you need it : DOWNLOAD
*Using PIT File just Tick Re-Partition and put PIT File in PIT ..simple!
ODIN 1.85
ODIN FILES HERE
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so continue..if not do it again...
VIDEO LINK : HOW TO GET INTO RECOVERY / DOWNLOAD MODE
Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
*PIT File isnt always needed to do this only if you get the 3 Red errors*
Plug in Phone with USB Cable To Computer
In ID:COM it should go yellow and you should see ADDED in the message box
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar
When you have all the files needed in ODIN, say JVU Rom as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone (computer will make a few noises like connect/disconnecting
Unplug the Cable to the Phone
Power Off Phone
Go into Download mode so that we can now root the Phone
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted
CF-Root is in ODIN FILES or DOWNLOAD HERE
Then Click START.. should take just a few seconds ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same again when you see S Logo on Phone unplug Cable
Close ODIN
Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want...
Reboot Phone when complete... DONE!
Please Check APN Settings.. for your area after you have done the following steps to give better signal
Sometimes Authentication Type is set to Default..try it at PAP and then Reboot Phone
As some ROMS APN settings are done manually for the user.. so be careful
Rom I am currently using : Blue SAUROM JWB
Hope this helps out a few people as there are quite a few posts opening up with the same problems or issues :good:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Manually Install CWM (need to have Root in your phone)
Download This FILE and copy it over to /sdcard/
Power off and Boot into Recovery with 3 Button Combo
Select 'apply sdcard:update.zip' and Install (Do not Delete this file from SD Card)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Deleting Cryption Meta Data Error : CWM6012-CM9-Recovery
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU CANT GET INTO RECOVERY (only if CWM doesnt work)...
Start ODIN
Put your Phone into Download mode and connect it via USB
(Volume Down + Home and then Power)
Download FeaModRecovery : HERE
Choose PDA and use the Downloaded File and put it in there > START
Wait for process to complete....
Exit ODIN..
Start Recovery ....
Install .. Reboot....Done
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU STILL RECIEVE THE : E: Failed to mount /sdcard
Try This :
Download This First SDFormatter (Windows)
1. Download "SDFormatter" from the link above
2. Install "SDFormatter"
3. Enable "USB Debugging Mode" from Developer Options in settings.
4. Connect your tablet to PC (USB).
5. Then, tap the "USB Strage Mode" to connect to PC.
6. Backup data on INTERNAL_SD card.
7. Run "SDFormatter".
8. Specify the drive letter of INTERNAL_SD in SDFormatter and click "(Option)" button.
9. "FORMAT TYPE" select "FULL OVERWRITE" and set "FORMAT SIZE ADJUSMENT" to "ON" and click "OK"
10. Now click "FORMAT" and wait for the procedure to complete. (Can take approximately 1 hour 40 minutes)
11. After format is completed you can recopy the backup files back onto the INTERNAL_SD
..or Try and Format SD card in your Computer
If none of the above works try this : Samsung Format Utility
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIX INTERNAL STORAGE ON GT-I9000M (/dev/block/mmcblk0 corrupted) : SEE THIS POST
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COMPUTER NOT CONNECTING TO PHONE VIA USB
Windows
Remove all traces of KIES in Add/Remove.. never use KIES anyway...Reboot PC
Unplug any attached USB Devices to PC
Use Latest Samsung USB Drivers HERE and install.. Reboot System when Done
Go to Device Manager and scroll to the Bottom > Universal Serial Bus controllers
Expand all Items >
Now Uninstall one by one all the way down...
Reboot Computer when Done.
Plug in Phone... wait till it recognises Device.
Some people have also tried ...
Going into Download Mode, Connect Phone to USB.
System should install a Driver.. and voila!
Done.
DOWNLOAD THIS AND FOLLOW INSTRUCTIONS IF YOU NEED MORE HELP
Please Hit the Thanks Button if I helped you... :victory:
A.I.O Rescue & Recover : LINK
Android Solutions : LINK
Samsung Updates : HERE
Latest Official I9000 and I9000M Firmwares collection : LINK
Modems : LINK
Perka's File Stash : LINK
Z4ROOT APP : HERE
3 BUTTON COMBO FIX : HERE
SECRET CODES : HERE *Use at your own Risk!*
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Procedure To Update Samsung Galaxy S With Cyanogenmod 10
Device must be running latest Gingerbread 2.3.6 with ROOT to begin .....
Remove KIES completely from Phone and reboot Computer then Install latest Samsung USB Drivers then Reboot Computer...
Ensure that your phone battery is at least 85 percent charged
Cyanogenmod 10 Download
Download Google Apps (Optional)
Connect your device to PC by using the cable.
Enable mass storage mode on it.
Now transfer / copy all the 2 files to your device’s internal SD card.
Ensure that you are not keeping it in deep directory.
Now disconnect the phone from computer.
You then need to enter into recovery mode.
To do so, switch off the device completely, press & hold Volume Up button + Home Button + Power key until recovery mode appears.
After entering into recovery mode, select “install zip from sdcard” & then “choose zip from sdcard“.
Navigate to the ROM file (which you’ve transferred earlier)
Select it & press on ‘Yes‘ to continue. ROM installation process will start.
Wait for the ROM to get installed.
After ROM gets successfully installed, your phone will land in the recovery mode again.
Now select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory.
The same procedure you have to do for installation Google Apps. (Just don’t do the above step i.e, don’t wipe the data after installations of Gapps).
After installaing both things, now press back button to land in recovery mode.
Select reboot system now from the Recovery mode to Restart the phone.
Usually first boot of the phone takes some time after flashing of new ROM so be patient....
Done!
Issues if you have any :
LOW STORAGE NOTIFICATION : HERE or See this LINK
If the above doesnt help TRY THIS APP
NO MOBILE DATA :
Toggle Flight mode ON/OFF
IMEI Issue :
Flash a stock version of Android for your device: GB 2.3.6 (JVU, or other) that will restore your IMEI
Then you can backup the /EFS folder.
NO 3G AVAILABLE :
The CSC you used is most likely not intended for your area.
This means that the broadband provider settings are not included and
need to be configured manually.
Go to : Settings->Wireless and Networks->Mobile Networks->Access Point Names, press the settings-button and select "New APN"
Galaxy S i9000 / 9001 Disassembly & Assembly
Will add more links when I can ...
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Snowhiter said:
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Click to expand...
Click to collapse
Your most welcome!
Will add more when i get the time...:fingers-crossed:
Added more useful Links.. should be everything you need
HI,
thank you for this huge How to!
I have big trouble to update my Device.
It is not possible to get in the download mode. I tried SDFormatter, it crashes every time i connect SI, Samsungs Ex. HDD Formater runs but no effects on the Phone. Odin cant flash anything (maybe of course of download modus).
What do you recommend?
Sys:
WIN XP Pro SP3, Samsung Driver, Kies
Samsung SI, Android 2.3, Vodafone (Germany) Branding, No Simlock, SIM insert (E-Puls, Provider), No Ex SD Card, original Samsung USB-Cable
What are you trying to update to?
Using the Format tool try with USB Debugging ON
>
Uninstall Kies and reboot machine
Use my HOW TO Files ...
Install Samsung USB Drivers to install then reboot computer again..
Open ODIN and Check Re-Partition and put in PIT File
Make sure all 3 are ticked...
Also put in PDA / Modem / CSC press start when phone is connected via Download MODE
Press start....
Then just follow the rest to Root it...
Let me know if this helps
If you are wanting to go to CM 10 or JB Kies is no use anyway...no one uses KIES anymore
Thanks a lot. I pressed volume +... That was my fault.
Now runs CM 10.1 Nighlty with Helly Bean!
Tnak you
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
grA$ said:
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
Click to expand...
Click to collapse
Glad it helped
** Updated :victory:
New links added ... should cover everything!
This should be more than enough for anyone with problems with there S i9000 Phones
Re: [HOW TO GUIDE] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★
Thanks for the amazingly helpful thread. I had spent amazing amounts of time looking for a JVU bootloader an could not find it. Now i don't need to as your GB odin files fulfilled all my needs.
Now to test out whether your section on drivers will solve my issues of connecting post GB ROMd phone to my computer.
Sent from my GT-I9000 using xda app-developers app
Your welcome, if you dont need Kies in your computer get rid of it ....
Reboot computer afterwards then Install the Samsung USB Drivers and reboot PC again to take affect....
If Phone doesnt recognise follow the Tutorial on the link if USB not Recognised
Random thought .......Life is so good!
High WAF Wireless Inductive Charging Mod Step by Step Guide
Ok i am a little confused with your guide so decided to ask a few questions
i have read your guide down to after odin and this is where i got stuck
i downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
mazoshi said:
I downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
Click to expand...
Click to collapse
Re-Partition > ON
If you downloaded the ODIN Files all these are included in the files PDA / MODEM / CSC
HERE
What Rom are you coming from etc...
im useing what was on the phone and my phone is upto date so not sure
Related
Ok, so I was updating my phone to froyo according to these instructions by Virnik0 (meh, it seems I can't use links in my posts), but the name of the topic is "[HOWTO] manually flash Samsung Galaxy S with JPM firmware ** WORKS **" And you can find it from these forums.
Everything went fine. I successfully updated my phone to froyo, but I didn't root my phone or install lagfix even though the person gives instructions on how to do so, instead I just jumped into this part. This is a quote from the instructions.
GUI Medthod:
Download Android Mate from the Market
- Open the Android Mate, and switch to File Explorer bookmark at the top
- navigate to the /efs folder
- by ticking, select nv_data.bin, and from the bottom menu, choose copy.
- navigate to your sdcard directory (/sdcard for internal SD, or /sdcard/external_sd for external SD, does not matter)
- press Paste from the bottom menu.
- Connect you're SGS to the usb and download ''nv_data.bin'' to your computer
- Open ''nv_data.bin'' with notepad or wordpad and search for ''KOR'' change this to the product code matching your country
Click to expand...
Click to collapse
Now after I have downloaded "Android Mate" and navigated to the /efs folder to my surprise I find that it's empty and doesn't have such file named "n_data.bin" or any other files for that matter.
What does this mean and how do I get such files there?
After searching forums I found out that you should take backup from those files in /efs, but that was not mentioned in the instructions I was following
Edit: This is what I did before I jumped into the part I have quoted above.
1] Download both I9000XXJPK and I9000XXJPM firmwares
2] Download Odin 1.3
3] Download 803 pit file
4] Startup Odin.
5] Extract I9000XXJPK and I9000XXJPM tar files which you have downloaded to separate folders.
6] Then in Odin: (Now we will flash JPK firmware)
a) Click PIT Button, select s1_odin_20100803.pit file
b) Click PDA Button, select I9000XXJPK-REV03-PDA-low-CL584433.tar.md5 file
c) Click PHONE Button, select MODEM_I9000XXJPK.tar.md5 file
d) Click CSC Button, select GT-I9000-CSC-MULTI-OXAJPK.tar.md5
e) Tick Re-Partition Button
f) Power off your phone and make sure you have SIM card out, SD card out.
g) Press and hold 3-button combo, to boot your phone in Download mode (Volume down, Menu, Power)
h) Once in Download mode, connect your phone to your PC via USB cable
i) In odin, ID:COM field shall change color to yellow, and in Message window, you will see message "Added"
j) Now press Start button.
k) Go and take cigarette, coffee, etc. This will take up to 15 minutes.
7] After successfull flash, phone will reboot itself, and Odin will write Success message. First boot can take another 10 minutes, so be patient during stare at glowing S logo on the screen.
8] If phone stays in text console (Recovery Mode) after reboot, writing (with red), that it is having problem with internal SD Card, do not panic, it will take another minute:
a) Just use Volume Down/Up to up or down movement and selection.
b) Select "Wipe cache partition" and press Home
c) Select "Format internal sd card" and press Home
d) Select "Wipe data / Factory reset" and press Home
e) Select "Reboot" and press Home
9] Get back to point 7]
10] Power off your phone again, press button combo for Download mode again.
11] Close Odin, start it again. It shall detect ID:COM port again.
12] Now press PDA, choose JPM_JPM_U_JPM.tar file (finally, JPM firmware).
13] Make sure Re-partition tick box is unticked.
14] Press Start
15] After reboot, you will have newest Froyo firmware available.
Click to expand...
Click to collapse
Edit2: Could it be that I need to root my phone in order to see the files in /efs?
Yes you need root.
Sent from GT-I9000 jpo. My own kernel for z4mod and with 341MB Ram
DamianGto said:
Yes you need root.
Click to expand...
Click to collapse
Thanks, now I see them and I was able to change the product code
Hi All,
These are my mobile details previously :
Mobile details: Samsung Captivate
ROM:FROYO.UCJI6
KERNEL VERSION: 2.6.32.9 [email protected] #1
BASEBAND VERSION:I897UCJI6
FIRMWARE VERSION:2.2
nUMBER OF aPPS: 46
I am new to the ROM world and this is my first time.
So i strictly followed the tutorial in this link on "[HowTo W/Pack] Flash Stock I9000 2.3.3 NEE Updated (again) 4/25/11"
http://forum.xda-developers.com/showthread.php?t=1045734
Which says :
1. Wipe data and cache/Factory Reset with CWM. (pull battery when complete to shut off phone)
2. Find the "GT_I9000_XWJVB_XXJVK_NEEJV3_Sbl.exe" file and click it and extract its contents into its current folder.
3. Open up Odin 1.7 and now select the 512 pit file I included, and select all the files in the necessary place in Odin and make sure "repartition" is selected". your odin should look like this http://d.pr/Ixt2
4. Put Your phone in download mode and connect, now hit start. (THIS IS WHERE THE ONLY DANGER IS, YOU ARE NOW FLASHING 2.3.3 AND THE NEW BOOTLOADER INCLUDED WITH 2.3.3 Just dont unplug your cable or have your computer die, otherwise you will be 100% Clear)
5. Boot up normally and let things settle.
6. now power off the phone and wait for it to shut off completely. at this point hold down "Volume down and Power" at the same time and wait till download digger appears. Open up Odin and select the 512 pit and xcals kernel(In the PDA box) I included and DE-select repartition if it auto selects and go ahead and connect your phone (Obviously needs to be in download mode) and flash.
7. The phone will reboot and once again let things settle (media scanning and whatnot). Plug in the USB cable and transfer the folders included in this pack named "Fixes and modems" and also "For Rooting" to your phone. then power off the phone once again. this time hold down "Volume Up and Power" as soon as you see the screen turn on let go of the power button and continue to hold volume up until you see CWM.
8. at this point you should be in CWM (Woot!). navigate to flash zip from SD and then navigate to the folder "Fixes and Modems" and flash "Enable CRT Lock.zip" and "update-xvjvb-home_button_fix.zip" and I recommend flashing "modem_ugjk4.zip" as JK4 seems to do the best.
9.Reboot. At this point reboot and you should be on stock 2.3.3! Congrats!!
10. If you want to root read the txt file i included for rooting!
I was able to install the ROM till the 7th step,but from there iam not able to apply the fixes and modems.
Once i press the volume up and power button its taking me to Andriod system recovery <3e> mode:
I have four options here:
1)reboot
2)update from sd card
3)wipe data card / factory reset
4)wipe cache parition
when i choose update from sd card by pressing power button,nothing is happing.
Can anyone help me in this regard.
Another issue iam facing is when i make call installing this rom my normal speaker under the at &T logo is not working,i have to switch on the speaker to talk to anyone, and thereturn key is also not working.
Best Regards,
Chandu.
I gt it resolved after installing the correct rom
Sent from my GT-I9000 using XDA App
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Would be great if you tried to explain what you tried to do with odin anyway.
what rom you tried to install?
ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Who says?
Which Rom are you trying to use and what are you coming from?
If flashing ODIN for JVU Rom :
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and put in your files for : CSC, PDA, MODEM.
Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Attach Phone
When you have all the files needed in ODIN, say JVU Rom for example as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted *File is included in ODIN Files*
Same again when you see S Logo on Phone unplug Phone Cable
Close ODIN
Let phone boot up ....
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Before doing this make sure you have what you need from the phone as it will ERASE everything!
Enable USB Debugging by going to Settings > Applications > Development > Check USB Debugging
Plug in Phone and copy over your chosen Custom ROM that you want
Reboot into Recovery : VOL UP + MENU + POWER
Wipe the 4 things (probably know these... you should do)
If not you choose these by using the left side keys on the phone and to apply changes click Menu key
WIPE : data/factory reset > cache partition
Scroll down and go to advanced
Dalvik Cache > Battery stats
Go Back
Install ZIP (ROM) from Zip Card
Reboot Phone when complete... DONE!
Hope this helps a lot of people if not just ask here if you are still having issues to save peole posting same questions again and again
I made up the first part, but after the phone went into recovery mode
The screen shows the following:
installin update ...
successfully installed package.
- Copying media files ...
e: failed to mount / sdcard (file exists)
e: copy_dbdata_media: cant mount / sdcard your storage not prepared yet. please use meny VI for format and reboot actions.
meida files copy failed.
- Wiping data ...
Formatting / data ...
e: format_volume: rfs format failed on / dev/block-mmcblkqp2
Formatting / dbdata ...
Formatting / cache ...
deleting meta data
Data wipe failed.
- Appling Multi-CSC ...
installing multi-csc
Cant access to / system / csc / eng / system /.
successfuly applied multi-csc.
Flash dbdata.rfs as PDA in Odin 1.85. Reboot. Congratulate yourself.
Sent from my GT-I9000 using Tapatalk 2
Helpppp
I have exactly the same problem. I had froyo 2.2 im new to this odin all these settings. Yesterday i was tried rooting my phone and I did. but after I mounted a courrupted rom from the recovery. and my android doesn't want to load. I followed the same instructions you just gave him. on these posts but now when i turn on the phone its the logo comes and nothing loads. Only Downloading VOL DWN + MENU + PW is working.
Are you talking to me devildrake? No, your problem is different and you need to flash the rom again too, not just dbdata lol. Do this.
Flash Gingerbread, in Odin (I always used JW4 but JVU will be fine) with 512 pit file and repartition checked. Untick reboot. Once its finished, unplug the USB cable and take the battery out. Put the battery back in and boot into download mode. Reset Odin. USB cable back in. Tick reboot again. Put dbdata.rfs in PDA. Flash.
Should boot into gingerbread. I've done this a LOT of times... Then you can go back to Odin and root.
If that doesn't work then I'd download a different version of GB, download new 512 pit, and download a new dbdata.rfs. Must be one of those corrupt.
Sent from my GT-I9000 using Tapatalk 2
Hi Guys,
Some people faced some problems with flashing stock ROM with Odin, so here is a guide for a perfect flash.
Steps:
1) Download all files attached downwards.
2) Check that you have Samsung Kies on your PC.
3) Install Samsung USB drivers then restart your PC (in this step don't connect your phone to PC or you must restart your PC to install it.
4) Open recovery mode on your phone( volume up + home + power) and wipe data/cache via CWM (if you want it it will be attached downwards), then format your phone with rio's multi formatter to RFS (stock format type)
5) Open odin v.3.07
6) Open download mode on your phone ( volume down + home + power) and then connect it to your PC.
7) Put your ROM in PDA as SS attached downwards then tick PDA.
8) Make sure that Re-Partition is not ticked.
9) Press Start and wait few minutes.
10) If your Odin is stuck in connections, close Odin and Reinstall Samsung USB drivers.
Enjoy!!!!!!!!!!!!!!!
Downloads:
1) Samsung USB drivers:
http://www.mediafire.com/download/4ano45gsfx8lfub/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
2) Odin v.3.07:
http://www.mediafire.com/download/n5hdq5v5j55saie/Odin307.zip
3) Egyptian Last ROM:
http://www.mediafire.com/download/kld6y1wi8jns14c/S5570IJPLF1_S5570IOJPLE2_EGY.zip
4) Rio's Multi Formatter:
http://www.mediafire.com/download/72cxxiyamm755w6/multi-formatter-v1.zip
5) Clockwork mod ( will not remove your recovery):
http://www.mediafire.com/download/ct8m3ap7320lf43/pop_plus_CWM.zip
CREDITS:
@rio. for his multi formatter
@myaservip for some steps
@biso46
If you need you stock region ROM you can go here:
http://www.sammobile.com/firmwares/2/
Another Method
myaservip said:
Another Method
Click to expand...
Click to collapse
But btw my method is easier and It works.
You musn't divide the .md5 to let it flash.
And I'm not arguing that your method is good, but my method is esaier for noobs .
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
installing stock roms r toooo long fineshed with
why u descusing something we already used and known
stop this ...flashing stock roms not a game for pro or noobs !!!
I have a big problem with my Samsung Galaxy Mini 2 GT-S6500D. My SD Card and USB storage is not loading up. If I try to open my files or gallery or listen to music it tells me there is not card inserted. When I go see the amount of storage used, It says 0,00B/0,00B for both USB and SD Card. Also, the upper part of the screen where it's suppose to give me notifications and battery stats and time is missing. As well as my Wi-Fi won't turn on, when I try to it gives me an error. I can't plug it onto my computer.I tried a few ways of fixing but to no avail. Anyone know how to fix this, people if it's possible not to lose my memory?
do you use cm 10.1 or stock
if stock try to flash it with odin3 and pit file
Please explain me what are you talking about. I am a noob to these stuff about and around phones
I think im using the stock one but the I can't connect my phone to the usb on the computer and use it normal. Nor I can't use internet
you should flash your phone this is the instructions
download odin3 https://www.copy.com/s/qmTqyZFweDIj/Odin3_v3.09.zip
samsung driver for s6500 downloadcenter.samsung.com/content/SW/201401/20140121132354500/SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0.exe
frimware for s6500 fileparadox.com/0bi6jri969ai/S6500DBGMK1_S6500DXECML1_XEC_.zip
install samsung drivers and
Download firmware from the above list
and extract the zip file, you should get
.tar.md5 file along with few other files.
2. Download Odin v3.09 and extract the zip
file, you should get Odin v3.09.exe file
along with other files.
3. Now Open/Run Odin v3.09.exe file as an
administrator (to open program with
admin privilege, right click on the Odin
v3.09.exe file and click on the “Run as
administrator” from the context menu, this
is applicable only on Windows Vista,
Windows 7 or higher PC)
4. Switch off and boot Galaxy Mini 2 S6500
into Download Mode by pressing and
holding the Volume Down+Home+Power
buttons together (long press until the
boot screen appear). A warning message
will flash, now press Volume Up key to
proceed to Download Mode .
5. Now connect your Galaxy Mini 2 S6500 to
your PC via USB cable
6. In Odin screen, you should see a COM
Port number like “0:[COM7]” at ID:COM
section and “Added!” text at the message
box. This means your device has been
successfully detected by Odin. (If not, then
try connecting through another USB port.
If you are using desktop PC, use USB port
located at the back of the CPU. If still
don’t work, then you should reinstall the
USB driver and try again)
7. Make sure that, only the “Auto Reboot”
and “F. Reset Time” options are checked
in Odin screen.
8. Now, click on the AP button and select
the .tar.md5 file that you get by
extracting the firmware zip file in step 1.
9. Now, click on the Start button to begin
the installation process, and wait few
moments.
10. Once completed, you would see “PASS!”
message in ID:COM port having green
background
11. Your phone should automatically reboot
after completion
12. You can now disconnect/unplug your
phone from computer
Done it all, just one thing, when I completed it, it showed me RESET with blue background.................... After which, later when my phone loaded it turned into PASS.
Thank you for helping me fix the problem with my phone
if i help you press thanks