Database Develop

(Mini-Guide) Flashing galaxy ace S5830i

Hi!!
PLEASE NOTE!!
This guide and these files are ONLY intented for samsung galaxy ace S5830i
If you use these files in any other model your phone will be unable to boot anymore and you might not be able to recover it from brick.
This guide is mainly for getting rid of the junk mobile companies put in your mobile phones.
When you are finished you will be updated to a Non-Branded STOCK 2.3.6 Turkish ROM. This rom is multilingual so you'll find no problems
You need to do the flasing:
-Odin v1.84
-ROM Files (multiple ROM files, as many people have problems with one-package file)
-PIT FILE (cooperve_0623.pit)
-Samsung Mobile Drivers 1.4.8.0
1 - Be sure to have installed the drivers properly. Reboot your system after de installation.
2 - Run ODIN 1.84 as administrator.
3 - Select the PIT File (do not change any option in ODIN, leave them as they are)
4 - Select all the four files in their proper place (this is the same as other samsung mobiles, do not use DEFAULTCALDATA file if you don't know what it is for, just use the other 4 files)
5 - Put your Galaxy ACE in download mode. To do so, shutdown your phone, remove the battery, remove simcard, remove microsdcard. Wait 10 secs. Put the battery (dont insert SIM or SDCARD). Now press vol+ vol- and power and wait until a warning screen appears. Then pres Vol UP to continue. You will see now DOWNLOAD MODE
6 - Connect your galaxy ace to your PC via USB. Odin will detect it and a yellow box will appear. Press START and do not touch anything until the proccess finishes. The phone will auto-reboot if everything goes well.
7 - When the android configuration screen appears, shutdown your phone, insert SIM and SDCARD and turn it on again. Finish the configuration proccess.
8 - DONE!!!
If you want to download all the files needed (except for the samsung drivers) download this .rar file
http://ul.to/ixtvnths
You are free to copy, send, upload in other server, etc in order for people to get the file.
I think it is easy but should you need an screenshot please feel free to tell me
Thanks for reading

[HOW TO GUIDE i9000] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★

I see there is a lot of people who post in here who dont know how to Flash JVU before Custom Rom with ODIN
Either they get the Red wipe error in Recovery or just arent sure on how to use it, hope this helps you...
THE TOPICS HERE ARE GUIDES ON HOW TO FIX OR USE :
RED WIPE DBDATA ERROR
FLASH JVU 2.3.6 BEFORE CUSTOM ROM
MANUALLY INSTALL CWM
FEAMOD RECOVERY INSTALL
FIX INTERNAL STORAGE ON GT-I9000M
FAILED TO MOUNT SD CARD (E: FAILURE IN RED)
COMPUTER NOT CONNECTING TO PHONE VIA USB
UPDATE TO CYANOGENMOD 10.
AND LINKS TO WHAT YOU NEED ......
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------
Red wipe error is because the problem is with the dbdata!
Install THIS FILE in the PDA section with ODIN and dont touch anything else!
DBDATA.RFS DOWNLOAD : If you need it
Open ODIN
Click the PDA button and choose the dbdata.rfs.tar file you downloaded
Make sure Re-Partition is unchecked
Boot your SGS into DOWNLOAD MODE
To do this : Hold down the Home, Volume Down and the Power button
Connect your device to your computer with the usb cable when in Download Mode
If your device is connected Odin will recognise it
Click Start in Odin and wait
When the process is completed your device will restart
No more dbdata errors!...
------------------------------------------------------------------------------------------------------------------------------------
HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
Samsung USB Drivers : DOWNLOAD MINE or LINK 1 : LINK 2
Needed to recognise Phone to your PC ... duh! :silly:
Reboot Computer once installed for changes to take effect :good:
Please do not attempt anything if you don’t know completely what it is.
If any damage occurs to you or your device, I will not be held liable ... you have been warned !!
If you arent sure ... just ask
FLASHING JVU ROM WITH ODIN v1.85
Why ODIN v1.85? ... I have not had any issues with it, plain and simple!
Use ODIN with PIT File
PIT File Incase you need it : DOWNLOAD
*Using PIT File just Tick Re-Partition and put PIT File in PIT ..simple!
ODIN 1.85
ODIN FILES HERE
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so continue..if not do it again...
VIDEO LINK : HOW TO GET INTO RECOVERY / DOWNLOAD MODE
Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
*PIT File isnt always needed to do this only if you get the 3 Red errors*
Plug in Phone with USB Cable To Computer
In ID:COM it should go yellow and you should see ADDED in the message box
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar
When you have all the files needed in ODIN, say JVU Rom as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone (computer will make a few noises like connect/disconnecting
Unplug the Cable to the Phone
Power Off Phone
Go into Download mode so that we can now root the Phone
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted
CF-Root is in ODIN FILES or DOWNLOAD HERE
Then Click START.. should take just a few seconds ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same again when you see S Logo on Phone unplug Cable
Close ODIN
Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want...
Reboot Phone when complete... DONE!
Please Check APN Settings.. for your area after you have done the following steps to give better signal
Sometimes Authentication Type is set to Default..try it at PAP and then Reboot Phone
As some ROMS APN settings are done manually for the user.. so be careful
Rom I am currently using : Blue SAUROM JWB
Hope this helps out a few people as there are quite a few posts opening up with the same problems or issues :good:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Manually Install CWM (need to have Root in your phone)
Download This FILE and copy it over to /sdcard/
Power off and Boot into Recovery with 3 Button Combo
Select 'apply sdcard:update.zip' and Install (Do not Delete this file from SD Card)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Deleting Cryption Meta Data Error : CWM6012-CM9-Recovery
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU CANT GET INTO RECOVERY (only if CWM doesnt work)...
Start ODIN
Put your Phone into Download mode and connect it via USB
(Volume Down + Home and then Power)
Download FeaModRecovery : HERE
Choose PDA and use the Downloaded File and put it in there > START
Wait for process to complete....
Exit ODIN..
Start Recovery ....
Install .. Reboot....Done
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU STILL RECIEVE THE : E: Failed to mount /sdcard
Try This :
Download This First SDFormatter (Windows)
1. Download "SDFormatter" from the link above
2. Install "SDFormatter"
3. Enable "USB Debugging Mode" from Developer Options in settings.
4. Connect your tablet to PC (USB).
5. Then, tap the "USB Strage Mode" to connect to PC.
6. Backup data on INTERNAL_SD card.
7. Run "SDFormatter".
8. Specify the drive letter of INTERNAL_SD in SDFormatter and click "(Option)" button.
9. "FORMAT TYPE" select "FULL OVERWRITE" and set "FORMAT SIZE ADJUSMENT" to "ON" and click "OK"
10. Now click "FORMAT" and wait for the procedure to complete. (Can take approximately 1 hour 40 minutes)
11. After format is completed you can recopy the backup files back onto the INTERNAL_SD
..or Try and Format SD card in your Computer
If none of the above works try this : Samsung Format Utility
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIX INTERNAL STORAGE ON GT-I9000M (/dev/block/mmcblk0 corrupted) : SEE THIS POST
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COMPUTER NOT CONNECTING TO PHONE VIA USB
Windows
Remove all traces of KIES in Add/Remove.. never use KIES anyway...Reboot PC
Unplug any attached USB Devices to PC
Use Latest Samsung USB Drivers HERE and install.. Reboot System when Done
Go to Device Manager and scroll to the Bottom > Universal Serial Bus controllers
Expand all Items >
Now Uninstall one by one all the way down...
Reboot Computer when Done.
Plug in Phone... wait till it recognises Device.
Some people have also tried ...
Going into Download Mode, Connect Phone to USB.
System should install a Driver.. and voila!
Done.
DOWNLOAD THIS AND FOLLOW INSTRUCTIONS IF YOU NEED MORE HELP
Please Hit the Thanks Button if I helped you... :victory:

A.I.O Rescue & Recover : LINK
Android Solutions : LINK
Samsung Updates : HERE
Latest Official I9000 and I9000M Firmwares collection : LINK
Modems : LINK
Perka's File Stash : LINK
Z4ROOT APP : HERE
3 BUTTON COMBO FIX : HERE
SECRET CODES : HERE *Use at your own Risk!*
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Procedure To Update Samsung Galaxy S With Cyanogenmod 10
Device must be running latest Gingerbread 2.3.6 with ROOT to begin .....
Remove KIES completely from Phone and reboot Computer then Install latest Samsung USB Drivers then Reboot Computer...
Ensure that your phone battery is at least 85 percent charged
Cyanogenmod 10 Download
Download Google Apps (Optional)
Connect your device to PC by using the cable.
Enable mass storage mode on it.
Now transfer / copy all the 2 files to your device’s internal SD card.
Ensure that you are not keeping it in deep directory.
Now disconnect the phone from computer.
You then need to enter into recovery mode.
To do so, switch off the device completely, press & hold Volume Up button + Home Button + Power key until recovery mode appears.
After entering into recovery mode, select “install zip from sdcard” & then “choose zip from sdcard“.
Navigate to the ROM file (which you’ve transferred earlier)
Select it & press on ‘Yes‘ to continue. ROM installation process will start.
Wait for the ROM to get installed.
After ROM gets successfully installed, your phone will land in the recovery mode again.
Now select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory.
The same procedure you have to do for installation Google Apps. (Just don’t do the above step i.e, don’t wipe the data after installations of Gapps).
After installaing both things, now press back button to land in recovery mode.
Select reboot system now from the Recovery mode to Restart the phone.
Usually first boot of the phone takes some time after flashing of new ROM so be patient....
Done!
Issues if you have any :
LOW STORAGE NOTIFICATION : HERE or See this LINK
If the above doesnt help TRY THIS APP
NO MOBILE DATA :
Toggle Flight mode ON/OFF
IMEI Issue :
Flash a stock version of Android for your device: GB 2.3.6 (JVU, or other) that will restore your IMEI
Then you can backup the /EFS folder.
NO 3G AVAILABLE :
The CSC you used is most likely not intended for your area.
This means that the broadband provider settings are not included and
need to be configured manually.
Go to : Settings->Wireless and Networks->Mobile Networks->Access Point Names, press the settings-button and select "New APN"

Galaxy S i9000 / 9001 Disassembly & Assembly
Will add more links when I can ...

Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial

Snowhiter said:
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Click to expand...
Click to collapse
Your most welcome!

Will add more when i get the time...:fingers-crossed:

Added more useful Links.. should be everything you need

HI,
thank you for this huge How to!
I have big trouble to update my Device.
It is not possible to get in the download mode. I tried SDFormatter, it crashes every time i connect SI, Samsungs Ex. HDD Formater runs but no effects on the Phone. Odin cant flash anything (maybe of course of download modus).
What do you recommend?
Sys:
WIN XP Pro SP3, Samsung Driver, Kies
Samsung SI, Android 2.3, Vodafone (Germany) Branding, No Simlock, SIM insert (E-Puls, Provider), No Ex SD Card, original Samsung USB-Cable

What are you trying to update to?
Using the Format tool try with USB Debugging ON
>
Uninstall Kies and reboot machine
Use my HOW TO Files ...
Install Samsung USB Drivers to install then reboot computer again..
Open ODIN and Check Re-Partition and put in PIT File
Make sure all 3 are ticked...
Also put in PDA / Modem / CSC press start when phone is connected via Download MODE
Press start....
Then just follow the rest to Root it...
Let me know if this helps
If you are wanting to go to CM 10 or JB Kies is no use anyway...no one uses KIES anymore

Thanks a lot. I pressed volume +... That was my fault.
Now runs CM 10.1 Nighlty with Helly Bean!

Tnak you
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now

grA$ said:
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
Click to expand...
Click to collapse
Glad it helped

** Updated :victory:

New links added ... should cover everything!
This should be more than enough for anyone with problems with there S i9000 Phones

Re: [HOW TO GUIDE] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★
Thanks for the amazingly helpful thread. I had spent amazing amounts of time looking for a JVU bootloader an could not find it. Now i don't need to as your GB odin files fulfilled all my needs.
Now to test out whether your section on drivers will solve my issues of connecting post GB ROMd phone to my computer.
Sent from my GT-I9000 using xda app-developers app

Your welcome, if you dont need Kies in your computer get rid of it ....
Reboot computer afterwards then Install the Samsung USB Drivers and reboot PC again to take affect....
If Phone doesnt recognise follow the Tutorial on the link if USB not Recognised

Random thought .......Life is so good!
High WAF Wireless Inductive Charging Mod Step by Step Guide

Ok i am a little confused with your guide so decided to ask a few questions
i have read your guide down to after odin and this is where i got stuck
i downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue

mazoshi said:
I downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
Click to expand...
Click to collapse
Re-Partition > ON
If you downloaded the ODIN Files all these are included in the files PDA / MODEM / CSC
HERE
What Rom are you coming from etc...

im useing what was on the phone and my phone is upto date so not sure

[Q] internal SD corrupt, how to install ROM on ExtSD?

hi guys....
i have a i9000.......... with soft-brick, i use a jig (301k whit miniusb ), and access to download mode and flashed a stock rom......
but the internal memory, keeps previous programs and gives me FC, ​​with CWM recovery after doing full wipe, and format the internal memory, restarting the computer maintains all, do not delete anything ........
now get a message that the internal sd is damaged, but not allow me to enter mode debbug because the phone is freeze ... I also recognize the pc to format the external memory .........
as I can do to install a ROM CM-10, in the external memory?
thanks for the help.
sorry for my eng.

You say the message says your internal SD is damaged. What EXACTLY does the message say?
Sent from my GT-I9000 using Tapatalk 2

try this! http://forum.xda-developers.com/showthread.php?t=1906089 i don't have an sgs, so i can't tell you if it works and i can't help you, but in that thread you can find someone to help you

I was having the same problem and found the solution here
I was having the same problem and found the solution here http://forum.xda-developers.com/showpost.php?p=35585404&postcount=8
this is my post to thanks for the kernel
http://forum.xda-developers.com/showpost.php?p=38210629&postcount=12
look for a sd fast I have a class 4 and was too slow and buy a class 10 and now works just like new.

far2 said:
I was having the same problem and found the solution here http://forum.xda-developers.com/showpost.php?p=35585404&postcount=8
this is my post to thanks for the kernel
http://forum.xda-developers.com/showpost.php?p=38210629&postcount=12
look for a sd fast I have a class 4 and was too slow and buy a class 10 and now works just like new.
Click to expand...
Click to collapse
Thank you.
I flash the kernel but got a boot loop.
I have the firmware JW4 not get the JVU ... my model is i9000t, could you help me get the firmware that worked with your phone.
Thanks in advance.
sorry for my English.

solved!!!
Downloading the ROM file: I9000XXJVU_I9000OXAJVU_OXA.rar
Downloading the ODIN & PIT files: Flashprogram_Samsung_I9000__Pits.rar
Downloading the Drivers for the PC: SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0.zip
Most importantly: KEEP YOUR PHONE FULL CHARGED OR AT-LEAST ABOVE 50% CHARGING LEVEL.
Once you are done with the prerequisites, you can move down to the installation procedure as below:
1. Unzip the ROM, ODIN and Drivers to their respective folders in case it requires any password, it will be “samfirmware.com”
2.Now, the first thing to be done is install the phone drivers on the PC which you are to use for flashing the ROM. To do this, navigate to SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0 folder and select the appropriate setup x86 or x64 based on the type of OS you are using on your PC.
Once this one has been installed, get your GT I9000 in the download mode by using the 3-Button combo. For that, first switch off the phone and wait for it to vibrate a little just to confirm that it is completely switched off. Then, press the three buttons: Power Key, Volume Down and Home Key and hold until you see a green android saying “Downloading”
3. Next, goto Flashprogram_Samsung_I9000__Pits folder and open I9003_Odin3 v1.82.exe (Don’t bother the I9003 in the file name. It is compatible for I9000 also)
4.Once ODIN has be opened, connect your phone to the PC while it is in download mode. Once connected, an “Added” remark will appear on the message window.
5. Next, click on the PIT button, navigate to the Flashprogram_Samsung_I9000__Pits folder and select s1_odin_20100512.pit
6. Then, click on the PDA button, navigate to the I9000XXJVU_I9000OXAJVU_OXA folder and select the CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.md5 file.
7. Then, click on the PHONE button, navigate to the I9000XXJVU_I9000OXAJVU_OXA folder and select the MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 file.
8. Then, click on the CSC button, navigate to the I9000XXJVU_I9000OXAJVU_OXA folder and select the GT-I9000-CSC-MULTI-OXAJVU.tar.md5 file.
PLEASE MAKE SURE TO SELECT THE FILE PROPERLY AS ABOVE AND DOUBLE CHECK BEFORE CONTINUING FURTHER.
9. Next, make sure that Re-Partition, Auto Reboot and F. Reset Time have been check marked.
Once all the above steps are done, click on Start button and wait for the message window to show “All threads completed” and “Pass” displayed on the top left box.
10. Then, click on PDA button, navigate to Kernel_JVU_Fix_sdcard file, and clic on Start!
and viola!!!
thanx far2

I glad this Solve the SGS problem for you
gerickt said:
solved!!!
and viola!!!
thanx far2
Click to expand...
Click to collapse
I glad this Solve the SGS problem for you, and all the people in the forum, hope some developer can make a kernel like this but for the new jw4+ or even better for the cm9 or cm10
I know some people has install the cm9 and cm10 do but they have a total sd failure, our sd is still readable and is even worse.
Gerickt yesterday I write to you a PM in Spanish wit more indication to you did you receive?
PD: nice you made a detail description for the procedure :good:

the developer answer to my
rxxxni was the developer to post the kernel here and he just answer the place to look for more info in his kernel here
htcmania.com/showthread.php?t=520348
I don't know if this is bad to post other links outside the xda but he made the kernel and there is more info

OTA Update 4BQL1 and "Installation Interrupted" Error

All, I have an AT&T Samsung S7 Edge (G935A) I have had for about 14 months. It is bone stock and I have always applied every OTA as they are pushed to the phone.
Three days ago I got the notice for a software update (4BQL1). I downloaded the 45 Mb update and told the phone to reboot. Upon rebooting the update installation got to 26% and then stopped with the message "installation interrupted". I tried the following fixes but nothing worked:
1. download and reapply update
2. Power down and restart in recovery mode then clear the cache. This was recommended AT&T in one of their forums for a previous update.
3. Factory reset and then restore of my backup settings.
These failed!!!!:crying:
Next step was to take a trip to my local AT&T corporate store. After 2 hours their only recommendation was to go home and use the Samsung Sync App on my PC to try and install any updates. I backed up my phone using the Sync app and then had it check for an update. Sync reported the phone to be on the most current firmware (4BQK2) which was incorrect.:crying:
Here is how I fixed my phone.
1. downloaded most current rev of Odin (3.12.3) I got from this website: https://odindownload.com/
2 Downloaded the full version of firmware 4BQK2. Note this is a 1.9 GB download. Thank you Norab for your post. https://forum.xda-developers.com/att-s7-edge/how-to/updates-g935a-servers-adb-sideloads-t3583165
Instructions:
1. BACK UP ANY FILES ETC YOU FEEL ARE CRITICAL BEFORE YOU START! (I used Samsung sync app on my PC with it connected to my phone). This install will ERASE all of your files and reimage your phone. Note: I am not responsible for your actions if you fail to heed this warning or you brick your phone.
Extract the 4Bk2 zip file. It will have 4 RAR files with BL, AP, CP and CSC appended to the file names. Use your favorite RAR app (I like 7 zip for windows) to extract the files into 4 folders. Each folders with will have one file with an .md5 extension.
2. Power down the Phone. Connect it to your PC with a USB cable (this assumes you already have drivers installed) and then restart the phone in update mode: Home button + Power button + Volume down button. You will need to follow the screen prompt and press volume up to enter download mode.
3. Launch Odin on your PC.
4. Verify Odin is connected to your phone via the USB cable. Odin will indicate this by showing a Comm port number in the upper left.
5. In Odin click the BL, AP, CP and CSC buttons (one at a time). This will a windows folder. navigate to the applicable folder and select the file with matching prefix (BL, AP, CP or CSC) then click Ok. Watch the log window. Odin will inspect the file and verify the MD5 hash. Odin will tell you if the file ok or if it is corrupted.
5. Once Odin has verified all four files, click start.
6. You will see a progress bar on your phone. If you left Odin at the default configuration it will restart your phone when the last file has been copied to your phone. Odin will display "PASS!" in the status area right above the comm port.
7. Wait for the phone to go through the installation process, you will see the AT&T globe for a while. This will take some time to complete. You should finally see the phone screen state "installing applications". Once this completed you will prompted to set up the phone.
8. Set the phone up as prompted.
9. If you backed up to Sync, now you can use it to restore all of your settings, apps etc. Otherwise log into your Samsung account and it will restore all of your settings over the air assuming you had previously configured your phone to backup your Samsung and Google accounts.
Once the restore is completed and your phone is stable, check for new updates. My phone showed me an update was available (4BQL1 in my case).
I downloaded the update and it installed correctly.
Good luck!
- Mike

Samsung Galaxy S9 Android Pie update on manually (One UI)

How to install Android 9 Pie update on Galaxy S9 [One UI update]
Compatibility: This section is compatible only with model SM-G960F of the Galaxy S9,
Step by step guide:
Step 1. Download the Android Pie firmware from the downloads section above – software version CRLI/CSAB. Make sure you have downloaded the correct firmware file on your PC. Remember, this is only for the Galaxy S9 model no. SM-G960F and Galaxy S9 model no. SM-G965F.
Step 2. Install Samsung USB driver (method 1 on the linked page) first of all. Double-click the .exe file of drivers to begin the installation. (Not required if you have already done this.)
Step 3. Also, download Odin PC software (latest version).
Step 4. Extract the firmware file now. You can use free software like 7-zip for this. Install 7-zip, then right click on firmware file and under 7-zip, select ‘Extract here’. You should get files in .tar.md5 format now. (You may a bunch of files, and you will find text like AP, BL, CP or CSC etc. written at the beginning of those files.) We will be loading this file into Odin, to be installed on the device.
Step 5. Extract the Odin file. You should get the Odin exe file (other files could be hidden, hence not visible).
Step 6. Disconnect your Galaxy S9 from PC if it is connected.
Step 7. Boot your Galaxy S9 into download mode:
Power off your device. Wait for 6-7 seconds after screen goes off.
Press and hold the three buttons Volume down + Bixby + Power together until you see the Warning screen.
Press Volume Up to continue to download mode.
Step 8. Double click on Odin .exe file (from step 5) to open the Odin window as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 9. Connect your device now using the USB cable. Odin should recognize your device. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in the bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
You can try different USB ports on your PC too.
Step 10. Load the firmware files into Odin. Click the AP button on Odin and the select the .tar.md5 file from above. See the screenshot below to find how the Odin window will look like after you have loaded the files.
Click on BL tab, and select the file beginning with BL text.
Click on AP tab, and select the file beginning with AP text.
Click on CP tab, and select the file beginning with CP text.
[Different!] Click on CSC tab, and select the file beginning with HOME_CSC text. If HOME_CSC file isn’t available, then select the file beginning with CSC text.
About CSC file: Using the HOME_CSC file won’t reset your device, and data on the phone shouldn’t be deleted. However, when we select regular CSC file, and it results in CSC on the device being different than that in CSC file, your phone will be formatted automatically. You can even choose to ignore loading the CSC file, that may do alright too. But if it doesn’t work out, repeat the whole process and select CSC file this time around.
Info: When you load files, Odin checks the md5 sum of firmware file, which takes time. So, simply wait until that’s done and the firmware file is loaded. Don’t worry if Odin gets unresponsive for a while, it’s normal. Binary size will also show up in Odin.
Step 11. Click on Options tab, and make sure Re-partition checkbox is NOT selected. Don’t use PIT tab, ever.
Go back to the Log tab now, as it will show the progress of the firmware installation when you hit the start button in the next step.
Step 12. Verify that everything is okay as mentioned above. When satisfied, click the Start button on Odin now to start flashing the firmware on your device.
Wait till installation is finished, after which your device will reboot automatically. You’ll get PASS message as shown below upon successful installation from Odin.
Some errors you may run into, and with respective solution.
If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the file and flash it again as said above.
If you get FAIL in the top left box, then also you need to flash the file again as stated just above.
Done!
Download Link:
Click Here To Download

Thanks bro

Bro,
The download link does not exist.