Hi There,
I Recently try a mod for my S5830m Wich is hardware compatible with "i" and "C" but not to "L", My carrier is Movistar from Argentina, and start giving me no more network service (call, sms, mms and 3g)
Since I installed the nice version of Jelly Blast, works almost everything fine but the earphones which was not detected and.... the network service.
When I goes to the download mode, ready to install the proper stock rom via odin ( a Mexican one because they haven't one for Argentina) I noticed my product name was changed to GT-S5830i, i guess it's no too important, after all they are compatible, but movistar doesn't recognice this model and therefore give me not service.
If you have the same problem be calm and try to get a proper firmaware from sammobile and flash it via odin.
As an adittional information the download mode is set by pressing this key combination, Vol UP + Vol DN + PWR.
:good:
:angel: I promise you to tell how it was with the new and debranded stock rom.
It's work like a charm
:victory: Wiiiiii :victory:
I used:
* Odin
* Stock Debranded Rom From Sammobile
Note: I recommend you to try to get a new fresh one from Sammobile , but if not sure how to search/pick one for your self always can use same as I used.
Step by Step
0) Read all steps before you start, verify you have everything.
===============================================
1) Unzip the rom
2) Sart Odin.
3) Set your phone in download mode (Vol UP + Vol DN + PWR).
4) Plug your phone to your computer.
5) Verify your phone is detected by odin and it's using a comm port.
6) Select the rom using the PDA Field, and lefting only checked the Auto Reboot and Reset Time Check Box.
7) Start
8) After Done, the phone automatically restart and probably you get stucked on the Samsung screen or got a boot loop, to solve this you have to restart your phone in recovery mode ( Vol UP + Home + Power ) and select Wipe Cache then Wipe User Data using Vol UP, Vol DN to navigate the menú and Home to select. After that restart your phone. If not, I recommend you to do just in case.
Note: Be patient, first boot took much time than others.
Troubleshooting:
I've done one thousand and one times this procedure with other samsung phones and never got a bricked one. If you are using secure roms (stock from samsung or carriers) your flash count reset to 0, and have 100% of assurance to successful.
If Odin doesn't recognize your phone, be sure to have installed the Samsung USB Drivers and Kies, If you still with problems, try to change the USB Port or restart your computer and start again the procedure.
Remember: Before start a panic attack, wipe chache and user data from recovery menu
I Hope this post help you to get back your phone to a usefull state. :fingers-crossed:
No service means wrong MODEM try PHONE_S5830CVJKL4.tar.md5 you can find it on the net.
Don't worry S5830m=S5830c=S5830i
Thanks!
Styrke said:
No service means wrong MODEM try PHONE_S5830CVJKL4.tar.md5 you can find it on the net.
Don't worry S5830m=S5830c=S5830i
Click to expand...
Click to collapse
Thanks a lot Styrke! I will try.
Ayuda! Help!
Hola!! Supongo que sos de Argentina ya que el problema lo tenias con una ROM de ARG. Queria sabar si pudiste solucionar el problema de que no levantaba 3G en tu s5830m. Yo instale previamente 5 o 6 ROMS hasta que di con tu post e instale la que vos publicaste y tampoco. Nunca levanto 3G. Que puede ser que no levanta señal???
Desde ya muchas gracias!!
elgorra78
Related
Hi,
I was using my Captivate well for almost 10 days (except for the GPS), but suddenly today after a battery reset the phone stop working (no apps installed before this occur).
When I turn it On ot just dont respond to commands.
I already try hard reset without success.
(Mods) I only unlock the phone for use DATA in Mexico.
I add a video of what happens when I try to unlock it (it simply dont respond) and also the phone turn on screen on and off when I dont do anything to it.
youtube_com/watch?v=7yAnSY_oUn8 (change _ for .)
Any other Ideas=?
Thanks
You should probably flash back to stock using odin.
Now in spanish(En espanol)
Deberias usar odin (el que te pone el telefono como quando salio de la factoria) para resetear el telefono
hello insert the system folder of froyoo in eclair now answers calls automatically, no WiFi, not enter download mode, does not enter recovery, as I fix it? update.zip could make a root with the application of explorer? any way let me install it thanks!
hola inserte la carpeta system de froyoo, en eclair ahora responde llamadas automaticamente, no conecta wifi, no ingresa en download mode, no ingresa en recovery, como lo soluciono? podrian hacer un update.zip con la aplicacion de root explorer? de ninguna manera me deja instalarlo gracias!!!
congratulations....i have no idea what you just said, but it sounds like you were doing something that you should not have been....take the phone back, ask for an iphone in exchange and let steve tell you how you want to use your phone
That isn't crazy talk, this is crazy talk, KA-BLA-BLA-BLA, KA-BLA-BLA-BLA, LOO-LOO!
obviously it is a poor translation from spanish.
hello i inserted the system folder from froyo in eclair and it now answers calls automatically. there is no wifi, no download, no recovery, can i fix it? can i make an update.zip run in root explorer?
that's my best guess at what he means.
can anyone speak spanish?
http://forum.xda-developers.com/showthread.php?t=819551&highlight=micro+usb+jig+download+mode
^ try this and flash over with odin oneclick
http://forum.xda-developers.com/showthread.php?t=731989&highlight=stock+rom
Seems he messed up his phone and can't get into download mode, he is requestingfor someone to make an update.zip with root explorer. It doesn't make all that much sense in Spanish either but I think is not fair to tease the guy, he seems to be in panic.
xybe said:
Seems he messed up his phone and can't get into download mode, he is requestingfor someone to make an update.zip with root explorer. It doesn't make all that much sense in Spanish either but I think is not fair to tease the guy, he seems to be in panic.
Click to expand...
Click to collapse
understandable that hes panicking....let that be a lesson to learn wtf you are doing before you do it! i have no sympathy for people that refuse to educate themselves first before doing something stupid.
he needs to get into download mode and restore stock jf6.
Did you try Odin? Download Odin, hold volume up and down before plugging in the phone. Connect phone with computer while pressing volume buttons down that shops put your phone in download mode and voila you stock Tom on there.
Sent from my SAMSUNG-SGH-I897 using XDA App
PPPeterP8nts said:
Did you try Odin? Download Odin, hold volume up and down before plugging in the phone. Connect phone with computer while pressing volume buttons down that shops put your phone in download mode and voila you stock Tom on there.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
LOL. i love our phone's auto correction abilities! i have this problem all the time!
no my captivate its atyt and de boton volume + - and power dont work
i guess what he did was that he copied the froyo folder in his eclair captivate to update to froyo....ahh i wish flashing was as simple as copying and pasting....
chumbalaca said:
no my captivate its atyt and de boton volume + - and power dont work
Click to expand...
Click to collapse
Being on AT&T has nothing to do with the Download Mode working.
chumbalaca said:
no my captivate its atyt and de boton volume + - and power dont work
Click to expand...
Click to collapse
Only option is to do the ADB command line - adb reboot download
HOWEVER...
Your one-click stock had BETTER work or you're screwed and have to send your phone back to AT&T. They exchanged mine for free once I explained that I couldn't use the buttons to get into download or recovery, but I was still without a phone for 2 days (happened on a weekend).
What thread did you find that method in :O
Captivate
Cog 2.2
Guys, I bought my ACE 2 weeks, and yesterday was trying to put the CyanogenMod, but before I decided to make a backup of the Stock Rom, downloaded the Rom Manager of the Market itself, and when I went back up, the phone hung up and not turn over, I believe that the software has corrupted him, searched the net methods all need to do more I go into download mode, and that's where comes the second problem, it does not enter or Recovery mode or the download, the only thing I I could do was volume - home power, and put the battery, and it appears in the Windows drivers. Anybody can help me?
Sorry for my bad English!
Thank you very much!
Well done my boi! This is what happens wen u dont take d trouble to SEARCH. Questions related to rom manager hv been answered tons of times. If u cant go in download mode then
1.) Use it as a paper weight
Or
2.) Go to the service center.
Sent from Galaxy Ace GT-S5830 using Grif's Cyanogenmod & allinone ram script.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]
He does not access the Download Mode, but when I plug it into my PC it appears in the list of drivers, but the phone does not appear anything, it all off! The Odin he acknowledges, but not upload the new ROM, is there another solution?
Refer to Dom's post. Pick either 1 or 2.
try this. unplug the phone from pc, remove the battery, leave it for 5 seconds. then press 3 button combination for download mode (vol down+home+power) and while u still holding those three button, reinsert the battery. this should force the device into download mode. of nothing happen, samsung service center is ur only solution.
I did what you said, but he's no sign, plus the PC recognizes, is there anything I can do?
kilderr said:
Eu fiz o que você disse, mas ele não da sinal nenhum, mais o PC reconhece, tem algo que eu possa fazer?
Click to expand...
Click to collapse
mmmmm ???? lol
neways the only option left for you is service center thas it and use english if you cant, then type your question in your language translate it in english through google and paste here one cant help if cant understand you see
kilderr said:
Guys, I bought my ACE 2 weeks, and yesterday was trying to put the CyanogenMod, but before I decided to make a backup of the Stock Rom, downloaded the Rom Manager of the Market itself, and when I went back up, the phone hung up and not turn over, I believe that the software has corrupted him, searched the net methods all need to do more I go into download mode, and that's where comes the second problem, it does not enter or Recovery mode or the download, the only thing I I could do was volume - home power, and put the battery, and it appears in the Windows drivers. Anybody can help me?
Sorry for my bad English!
Thank you very much!
Click to expand...
Click to collapse
Dis mite help. Read all d posts
http://forum.xda-developers.com/showthread.php?t=1167108&page=2
http://forum.xda-developers.com/showthread.php?t=1071970
Sent from Galaxy Ace GT-S5830 using Grif's Cyanogenmod & allinone ram script.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]
kilderr said:
Guys, I bought my ACE 2 weeks, and yesterday was trying to put the CyanogenMod, but before I decided to make a backup of the Stock Rom, downloaded the Rom Manager of the Market itself, and when I went back up, the phone hung up and not turn over, I believe that the software has corrupted him, searched the net methods all need to do more I go into download mode, and that's where comes the second problem, it does not enter or Recovery mode or the download, the only thing I I could do was volume - home power, and put the battery, and it appears in the Windows drivers. Anybody can help me?
Sorry for my bad English!
Thank you very much!
Click to expand...
Click to collapse
Hey!
Here is too some things, with little differences. Try them WORD BY WORD, maybe some works for you!
CHEERS!
Use a gig to simulate it into download mode.
Sent from my GT-S5830 using xda premium
I try this,
1)Remove sim, battery, sd.
2)Connect to PC
3)Power+ Vol down + Home
4)Put in Battery
5)Again: Power + Vol down + Home
6)Now my phone apeared in Odin slot
but when I do the flash, the connection setup on odin stuck!
Do you try to flash a full package firmware? And try to flash using another USB port or computer.
I tried another PC and another USB Port, but nothing happens!
Stop Setup Connection on ODIN! =(
I Lost my Phone?
kilderr said:
I try this,
1)Remove sim, battery, sd.
2)Connect to PC
3)Power+ Vol down + Home
4)Put in Battery
5)Again: Power + Vol down + Home
6)Now my phone apeared in Odin slot
but when I do the flash, the connection setup on odin stuck!
Click to expand...
Click to collapse
btw when you did this then was your phone in download mode.. means "downloading" appeared on screen?
if not then you should try to get that in download mode... odin will detect it any day but download mode is most important....
and after trying most of things if it doesn't work then go to service center and dont tell them you bricked it.. give foolish reasons
Why is it that everyone wants to give the already stated suggestions when it's the same thing over and over in the same thread again and again?
consegregate said:
Why is it that everyone wants to give the already stated suggestions when it's the same thing over and over in the same thread again and again?
Click to expand...
Click to collapse
relak ah brudder why today you seem so pek chek here and there in the forums?
go sleep early lah
Dude, just follow the instructions (if you read deeper you will realize all of them are basically the same as Consegregate said) ... Try with the USB Jig (but you need to have one)... Nothing worked? Use your phone warranty... Don't have warranty? Use it as paper weight
happily1986 said:
relak ah brudder why today you seem so pek chek here and there in the forums?
go sleep early lah
Click to expand...
Click to collapse
Need to abstain from general forum... LOL.
O Problema é que ele não entra em Modo Download, o ODIN reconhece, mas não aparece Downloading no visor!!!
kilderr said:
O Problema é que ele não entra em Modo Download, o ODIN reconhece, mas não aparece Downloading no visor!!!
Click to expand...
Click to collapse
English dude! English
Sent from Galaxy Ace GT-S5830 using Grif's Cyanogenmod & allinone ram script.
Dont jus say thanks, use d 'THANKS' button. [XDA RULE]
I have a Samsung Galaxy Tablet 7" (Verizon) using wifi only. I was updating the OS and ended up with a picture of a phone then a triangle with "!" then a computer icon. the tablet wont communicate with the computer and wont do a reset with the power and volume button. Can anyone give me a step by step assistance. This was the first time I used ODIN. I had no issues prior to this. Now the battery wont take a charge either.
I think the symbol means kernel failure.
PLEASE HELP!!
Have had that display for me too during a rom upgrade. Fixed it by just downloading the Overcome files from the page below and run through to the first part where it installs the Stock gingerbread rom, where it states "Once it’s done booting up, you should get your Tab in a new, factory-fresh JQ1 Gingerbread", unless you wish to go all out and do the Overcome one completely, which is a great rom by the way.
p1000.teamovercome.net/?page_id=64
Cheers
Paul
How did you get the tab to connect to your computer again..because it doesn't recognize mine when in this stage and the battery wont charge after this incident
Amigo la solucion solo es cargar el fille .PIT de La ROOM correcta de tu modelo de galaxy con el ODIN.... a mi me sucedio y de esa manera pude salir de ese error..
do you know where I can find the PIT file for a samsung galaxy tab 7 inch Model SCH-1800 and how to do it step by step with ODIN? Also what about the connection to the computer that is not connecting or maintaining a battery charge because of this error.
It might not help you, but when I had this problem and Odin failed, I tried flashing fresh kernel, PIT and ROM images to the Tab using Heimdall. It even has a dedicated button to remove the computer-triangle-phone screen and theoretically return you to the standard Download mode.
I know
Had this problem to, don't worry it's just like a soft brick, and can easilly be recovered using a stock samsung firmware
I've used Odin to flash back.
Had the problem where odin dosen't detect the tab, just ignore that and flash the firmware as you would normally do.
Is there any guide to solve this issue? Because everybody say something, but I can't put them together.
First I will write my case:
-- I was trying to install cynogenmod, the first thing I do is pressing 'home+volDown+power" buttons. Then I saw a downloading screen, I waited here for 1-2 hours, nothing changed. Then dummy me decided to restart the device, when I do so I saw the screen exactly the same with @evenground attached.
-- I opened the case and removed the battery then replaced it. Nothing changed.
Things that I don't understand:
** How can I do something with my PC while my PC do not recognize the device via USB?
** Is my tab be able to charge? Because when I try to charge (not with PC, normal way), the screen that I mentioned is on for 2-3 sec then off for 2-3 sec. (flashing)
** Is its name "Hard Brick" or "Soft Brick"?
** How to use odin or heimdall in that situation?
I really stuck and dont know what to do. :/
As Erkanger stated above again HOW DO I USE ODIN if my computer and re-flash original firmware if my computer doesn't recognize the device and doesn't hold charge..can someone give the step by step and download locations for which ODIN and FIRMWARE to use PLEASE!!!
pgp66 said:
Have had that display for me too during a rom upgrade. Fixed it by just downloading the Overcome files from the page below and run through to the first part where it installs the Stock gingerbread rom, where it states "Once it’s done booting up, you should get your Tab in a new, factory-fresh JQ1 Gingerbread", unless you wish to go all out and do the Overcome one completely, which is a great rom by the way.
p1000.teamovercome.net/?page_id=64
Cheers
Paul
Click to expand...
Click to collapse
this is the download mode ...just flash other rom and will work. this happen to me today .
site you posted doesnt work I get "Error establishing a database connection"
I apologize, because I don't know much about this kind of stuff. And I don't mean to post this in the wrong place, but, I have an issue and i have been looking around for a few hours for a solution, but I haven't found anything that really even describes what my problem is.
I was trying to root my Samsung Galaxy Tab 3, SM-T2109, I set it into Download mode, and opened up Odin. I had Auto Reboot and F. Reset time checked. I checked the PDA box and loaded a ROM called "prerooted.tar.md5". I then clicked start and waited for it to work. Odin reported no errors and my tablet rebooted, the samsung galaxy tab 3 logo looked completely normal. But as soon as it reached the screen with the animation, before the tablet boots up, i knew something was wrong, because the animation never came up, only the booting up noise. Then, when the tablet was supposed to be started up, it never displayed anything on the screen. In order to get it to work I push the lock button once, then the screen shuts off, then i push it again and the display comes up. When i do this, i notice that the screen flashes, notably especially on blue colors, between random colors. Constantly flickering. The touch screen works fine, and everything else seems to be completely normal. I fiddled around with the settings for a bit and decided i wanted to try to factory reset.
I shut down the tablet and did a factory reset, but that didn't work. Still the same thing, I researched some more and found a video that said to flash something using odin, that would apparantly unroot the device. I tried this, the thing is called "KIES_HOME_T210RUEAMG4_T210RXACAMG4_1304745_REV00_user_low_ship.tar" I did it, and once again, when i booted up the device it did the same exact thing.
I do not believe that there is anything physically wrong with the display, because when i set it to download mode, the screen returns to normal, and does not have this problem, but when i am in recovery mode, or using the regular tablet, it has this problem.
I'm wondering how i can fix this, because it is quite the annoyance, though the tablet is still theoretically useable, it's very very annoying to have to watch the screen flicker like this.
Im sorry if i left out any details, I didn't mean to. This is my first time doing this and i dont know much, if you need any more information i'd be happy to comply.
Thank you for taking the time to read this.
There seems to be no end of Tab 3 owners posting on Galaxy Tab 7" original forum.
Sent from my GT-N7100 using xda app-developers app
priyana said:
There seems to be no end of Tab 3 owners posting on Galaxy Tab 7" original forum.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Oh, I'm sorry. I'll post in the right spot
any fix yet? I tried installing the Blackhawk kernel 1.7 and 1.8 and I get an error. Also there is no rockettab kernel that I can find.
I managed to fix mine by installing the "RocketTab2.1_MOD_T210_MK9_Kernel.zip (original T210 MK9 RocketTab kernel, if you want to revert)" from the Rockettab thread after installing my custom ROM that I wanted to install.
i have the same proble with my galaxy can anybody help me out please??
rooted flickering screen problem
having same problem can any one help
Come on guys.
Go to
http://forum.xda-developers.com/galaxy-tab-3
And leave us to our tab 1 forum.
Sent from my GT-P1000 using xda app-developers app
solucion
cam105 said:
i have the same proble with my galaxy can anybody help me out please??
Click to expand...
Click to collapse
prueba la preroot es normal el parpadeo, falla el kernel toma el archivo rockettab 2.1 e instalalo por recovery
si sirve ya lo probe
SOLUCION
cam105 said:
i have the same proble with my galaxy can anybody help me out please??
Click to expand...
Click to collapse
HELLO, FOLLOW THESE STEPS
1. INSTALL prerooted.tar.md5 through ODIN. In this step it is normal for the screen to flicker.
Two. By Odin INSTALL RECOVERY, flash is normal to continue
3 DOWNLOAD the kernel "RocketTab2.1_MOD_T210_MK9_Kernel" en google input "RocketTab2.1_MOD_T210_MK9_Kernel.zip" select first link
select first link
4 install zip from the tab 3 recovery you installed in step 2
5 enjoy
HOLA, SIGUE LOS SIGUIENTES PASOS
1. INSTALA prerooted.tar.md5, mediante de ODIN. En este paso es normal que la pantalla que parpadean.
2. Mediante Odin INSTALL RECOVERY , es normal que siga parpadean
3 DESCARGAR el kernel "RocketTab2.1_MOD_T210_MK9_Kernel" desde google "RocketTab2.1_MOD_T210_MK9_Kernel.zip"
escoger primer link
4 instala el zip desde el recovery desde la tab 3 que instalaste en el paso 2
5 enjoy
Solution
I had the same problem, I fixed with these instructions: use SAMSUNG Kies, plug ur mobile cable to both the pc and your device, then the program tells you that a firmware is available to be downloaded into your device, download & Enjoy ::laugh:
can anyone help me out i want to root my tablet is a samsung galaxy tab 3 7.0 wifi model but whne ever a press the power and the volume up and home button the screen come with an androir laying down with a triangle and exclamation mark in it. it gives me different options like wipe and factory reset. i am usig odin to root it but the tablet does not appear so i dont know ho can a rooted can someone please help me out i will appreciated thank you