Hey guys
I got XZ C6603 today from handtec. I activated brand new LTE simcard at rogers store and set up lte apn.
Soon as I did that data connection rapidly changing from h+ to 3g for a while then drop the data connection and phone reception as well.
Seems like lot of ppl here in Canada having trouble getting LTE connection but I am having hard time getting my phone reception and H+ connection.
I'm not sure either XZ is defect or this phone is simply wont work with Rogers.
Any solutions?? or should I just return the phone back to handtec?
LTE doesn't seem to work with the Z on Rogers.
Go into network settings and network mode and change it to only WCDMA(preferred)/GSM.
3G and HSPA+ work flawlessly so keep it on those instead.
Basically the phone keeps searching for an LTE network but can't connect so it'll keep switching between the network modes.
I'm hoping there's a solution to this soon, because the Z can actually find the Rogers LTE network but can't connect for some reason.
Probably a work around fix that can be done. :good:
ssj_jaypee said:
LTE doesn't seem to work with the Z on Rogers.
Go into network settings and network mode and change it to only WCDMA(preferred)/GSM.
3G and HSPA+ work flawlessly so keep it on those instead.
Basically the phone keeps searching for an LTE network but can't connect so it'll keep switching between the network modes.
I'm hoping there's a solution to this soon, because the Z can actually find the Rogers LTE network but can't connect for some reason.
Probably a work around fix that can be done. :good:
Click to expand...
Click to collapse
Now I have solid reception + HSPA+ Thanks! :good:
Hope we can use LTE soon though
ssj_jaypee said:
LTE doesn't seem to work with the Z on Rogers.
Go into network settings and network mode and change it to only WCDMA(preferred)/GSM.
3G and HSPA+ work flawlessly so keep it on those instead.
Basically the phone keeps searching for an LTE network but can't connect so it'll keep switching between the network modes.
I'm hoping there's a solution to this soon, because the Z can actually find the Rogers LTE network but can't connect for some reason.
Probably a work around fix that can be done. :good:
Click to expand...
Click to collapse
HSPA+ will probably be unpredictable on a regional basis - many North American carriers use UMTS1900 and the 6603 does not support that band for HSPA+ operation.
6603 will not operate on LTE in any band in North America I'm aware of.
Entropy512 said:
HSPA+ will probably be unpredictable on a regional basis - many North American carriers use UMTS1900 and the 6603 does not support that band for HSPA+ operation.
6603 will not operate on LTE in any band in North America I'm aware of.
Click to expand...
Click to collapse
You are wrong,
Rogers does support LTE 2600
I would not use a phone on Rogers that can't get 1900Mhz but ... You should be able to use 2600 LTE. Have you entered the LTE APN ?
Entropy512 said:
HSPA+ will probably be unpredictable on a regional basis - many North American carriers use UMTS1900 and the 6603 does not support that band for HSPA+ operation.
6603 will not operate on LTE in any band in North America I'm aware of.
Click to expand...
Click to collapse
HSPA+ works fine where I am on my 6603.
People have been able to get LTE on theirs as well, depending on the region.
EG8196 said:
You are wrong,
Rogers does support LTE 2600
Click to expand...
Click to collapse
My LTE worked for an hour the other. I've read the 2600 band is a higher speed band, but it has weaker penetration and more sensitive.
Im beginning to think that you need both 2100 and 2600 bands for LTE to properly work in Canada since Rogers have both deployed simultaneously. Maybe Rogers need to improve their 2600 deployement in order for the XZ to work.
arlaken said:
My LTE worked for an hour the other. I've read the 2600 band is a higher speed band, but it has weaker penetration and more sensitive.
Im beginning to think that you need both 2100 and 2600 bands for LTE to properly work in Canada since Rogers have both deployed simultaneously. Maybe Rogers need to improve their 2600 deployement in order for the XZ to work.
Click to expand...
Click to collapse
You need band 4 and band 10. Each frequency is used for different reasons (upstream/downstream). Just having 2,600 Mhz won't do anything. It's already been confirmed by multiple users that LTE doesn't work in North America (AT&T, Rogers, etc.)
That's why the C6603 wasn't released in North America.
The leaked C6606 model should support it, as well as the ZL. (http://playstation.com/psm/certified.html)
LTE on Rogers explained: http://forum.xda-developers.com/showthread.php?p=38864511#post38864511
Then how does the optimus g on rogers use lte 2600? The optimus g 2600 on rogers only have lte band 700/2600 according to rogers website. This is the first carrier phone to use the 2600 network I believe
ccloudc said:
Then how does the optimus g on rogers use lte 2600? The optimus g 2600 on rogers only have lte band 700/2600 according to rogers website. This is the first carrier phone to use the 2600 network I believe
Click to expand...
Click to collapse
Because it uses 2,600 Mhz (band 7) for the downlink and 1,700 Mhz (band 4) for the uplink (even though it doesn't list it in the specs).
(Going into the Service Menu on the Optimus G shows off its full band support.)
Without the appropriate uplink AND downlink support, LTE will not work.
Rogers has LTE deployed on bands 4, 7, and 10.
The C6603 supports bands 1, 3, 5, 7, 8, and 20.
BluechipJ said:
Because it uses 2,600 Mhz (band 7) for the downlink and 1,700 Mhz (band 4) for the uplink (even though it doesn't list it in the specs).
(Going into the Service Menu on the Optimus G shows off its full band support.)
Without the appropriate uplink AND downlink support, LTE will not work.
Rogers has LTE deployed on bands 4, 7, and 10.
The C6603 supports bands 1, 3, 5, 7, 8, and 20.
Click to expand...
Click to collapse
Hi, can you tell me how to get the lte band menu?
Regards
Related
So good news for all Diamond euro owners in LA (and other places of course)...the tmobile network supports the 2100mhz band for 3G so no need for a US version!!
http://support.t-mobile.com/knowbase/root/public/tm23715.htm#7
Sorry if this is old news, but i just realized it =)
this is great if true?
T-Mobile devices use the 1700Mhz/2100Mhz frequency band (for 3G) and I thought Europe 3G devices use 900Mhz/2100Mhz. Could U clarify further...
you said it correct...tmobile does use 1700mhz/2100mhz, and the euro diamond supports 2100mhz which should work since tmobile will be using it...i spoke to a tmobile tier 2 rep, he confirmed it as well...
That can't be right. T-Mobile AWS 3G uses the 1700 MHz band for uplink and 2100 MHz for downlink. I doubt T-Mobile US set up aside any channels in the 2100 MHz band as uplink channels.
It's kind of academic, as I can't get 3G on T-Mobile USA using a Euro Diamond in NYC, where we've had 3G deployed for a few months now. I've never heard of anyone else doing it either. Oddly, there's a "UMTS(1700)" selection in the band settings in the phone control panel, but if I try selecting that, it just jumps back to using T-Mobile's normal PCS band with EDGE for data.
If that tier 2 tech can get you onto AWS 3G with your Diamond, definitely let us all know about it, but don't get your hopes up too high.
Drachen said:
That can't be right. T-Mobile AWS 3G uses the 1700 MHz band for uplink and 2100 MHz for downlink. I doubt T-Mobile US set up aside any channels in the 2100 MHz band as uplink channels.
It's kind of academic, as I can't get 3G on T-Mobile USA using a Euro Diamond in NYC, where we've had 3G deployed for a few months now. I've never heard of anyone else doing it either. Oddly, there's a "UMTS(1700)" selection in the band settings in the phone control panel, but if I try selecting that, it just jumps back to using T-Mobile's normal PCS band with EDGE for data.
If that tier 2 tech can get you onto AWS 3G with your Diamond, definitely let us all know about it, but don't get your hopes up too high.
Click to expand...
Click to collapse
AWS?? well the tier 2 tech did say it...i dont know if he was just talking out of his ass or not...but we'll see in the coming weeks...ill try to get tmobile rep on the phone again to ask them how i can get it...or if i can, even though its supported..
Malik05 said:
AWS?? well the tier 2 tech did say it...i dont know if he was just talking out of his ass or not...but we'll see in the coming weeks...ill try to get tmobile rep on the phone again to ask them how i can get it...or if i can, even though its supported..
Click to expand...
Click to collapse
As I understand it, if a phone says it supports 2100 it is referring to the UMTS Band 1 used in Europe which is 1920-1980MHz Uplink & 2110-2170Mhz Downlink (see UMTS Frequency Bands - Wikipedia). The 1700AWS Band (UMTS Band 4) uses 1710-1755MHz Uplink and 2110-2155MHz Downlink. So, while they do overlap some they are not identical (A Visual Guide to AWS - PhoneScoop)
So, I don't believe that a phone with 2100 EU support will work with T-Mobile 3G because it doesn't support the 'right' 2100 nor the 1700. Likewise, I don't believe that a phone with 1700 support will work for 2100 EU.
If you want to get technical the "US" Diamond won't work for 3g on T-Mobile either. The 3g band is only for 850/1900. (so i guess we're screwed either way) I'm in Salt Lake City and I don't believe Utah is slated to get 3g until 2009 at this point. I bought the diamond knowing full well that 3g was going to be a slim possibility on this phone. However, a user with a DIAM100 is claming that he's been getting 3g service on T-Mobile in NJ. He said that he'd post screenshots.. I don't know if he's done that or not. I guess all we can do is wait and see.
RavenGirl said:
If you want to get technical the "US" Diamond won't work for 3g on T-Mobile either. The 3g band is only for 850/1900. (so i guess we're screwed either way) I'm in Salt Lake City and I don't believe Utah is slated to get 3g until 2009 at this point. I bought the diamond knowing full well that 3g was going to be a slim possibility on this phone. However, a user with a DIAM100 is claming that he's been getting 3g service on T-Mobile in NJ. He said that he'd post screenshots.. I don't know if he's done that or not. I guess all we can do is wait and see.
Click to expand...
Click to collapse
Do you know who this user is? maybe i can PM him and get some details...i knew i wasn't going to get 3G with the diamond, but after talking to the rep. i kind of want to look into it more since there may be a possibility.
RavenGirl said:
If you want to get technical the "US" Diamond won't work for 3g on T-Mobile either. The 3g band is only for 850/1900. (so i guess we're screwed either way) I'm in Salt Lake City and I don't believe Utah is slated to get 3g until 2009 at this point. I bought the diamond knowing full well that 3g was going to be a slim possibility on this phone. However, a user with a DIAM100 is claming that he's been getting 3g service on T-Mobile in NJ. He said that he'd post screenshots.. I don't know if he's done that or not. I guess all we can do is wait and see.
Click to expand...
Click to collapse
Honestly I'm gonna go ahead and call BS on him for that, I've never heard of anyone getting T-Mobile 3G and I know quite a few people with the Diamond/Raphael on T-Mobile in 3G areas.
wpsantennas said:
As I understand it, if a phone says it supports 2100 it is referring to the UMTS Band 1 used in Europe which is 1920-1980MHz Uplink & 2110-2170Mhz Downlink (see UMTS Frequency Bands - Wikipedia). The 1700AWS Band (UMTS Band 4) uses 1710-1755MHz Uplink and 2110-2155MHz Downlink. So, while they do overlap some they are not identical (A Visual Guide to AWS - PhoneScoop)
So, I don't believe that a phone with 2100 EU support will work with T-Mobile 3G because it doesn't support the 'right' 2100 nor the 1700. Likewise, I don't believe that a phone with 1700 support will work for 2100 EU.
Click to expand...
Click to collapse
I have the USA sold "quad band" euro diamond distributed by htc USA. This is essentially re-flashed euro diamond hardware sold to support american networks, not the 850/1900 newest USA 3G diamond compatable with AT&T. I have looked into this issue and also talked to T-mobile and there seems to be alot of confusion regarding T-mobile's AWS USA 3G network (or maybe they have simply confused me). Here is what I have found out: Assuming they are correct, they are telling me 3G voice for T-mobile usa runs in both the 1700 AND 1900 mhz band, and therefore my euro diamond shoud be supported at 1900mhz for voice 3g support. This 1900mhz is part of the "quad band" voice radio hardware on the euro diamond. Data (AWS 3G for USA) "HSDPA" , which T-mobile has not yet released, runs in the 2100mhz bandwidth, and Data AWS "HSUPA 3g" runs in the 1700mhz bandwidth. Therefore my hardware would not support HSUPA @ 1700mhz, but would support the HSDPA @ 2100mhz. As to the idea that euro bandwidths are different than USA bandwidths, well apparently they are. For example "2100mhz" networks in europe might be actually using 2110mhz-2170mhz, whereas in the USA T-mobile's network may use 2100-2140mhz actual bands. However because these are close and still in the 2100mhz band, there should still be compatability with 2100mhz hardware radios regardless of networks varying the bandwidth slightly.
Of course this may be too optimistic, but it would be very cool if true and I am hoping for the best .
sureloch said:
I have the USA sold "quad band" euro diamond distributed by htc USA. This is essentially re-flashed euro diamond hardware sold to support american networks, not the 850/1900 newest USA 3G diamond compatable with AT&T. I have looked into this issue and also talked to T-mobile and there seems to be alot of confusion regarding T-mobile's AWS USA 3G network (or maybe they have simply confused me). Here is what I have found out: Assuming they are correct, they are telling me 3G voice for T-mobile usa runs in both the 1700 AND 1900 mhz band, and therefore my euro diamond shoud be supported at 1900mhz for voice 3g support. This 1900mhz is part of the "quad band" voice radio hardware on the euro diamond. Data (AWS 3G for USA) "HSDPA" , which T-mobile has not yet released, runs in the 2100mhz bandwidth, and Data AWS "HSUPA 3g" runs in the 1700mhz bandwidth. Therefore my hardware would not support HSUPA @ 1700mhz, but would support the HSDPA @ 2100mhz. As to the idea that euro bandwidths are different than USA bandwidths, well apparently they are. For example "2100mhz" networks in europe might be actually using 2110mhz-2170mhz, whereas in the USA T-mobile's network may use 2100-2140mhz actual bands. However because these are close and still in the 2100mhz band, there should still be compatability with 2100mhz hardware radios regardless of networks varying the bandwidth slightly.
Of course this may be too optimistic, but it would be very cool if true and I am hoping for the best .
Click to expand...
Click to collapse
Unfortunately, they've provided you some bad information. Each frequency band/range has a pair of uplink and downlink frequencies - you can't use one without the other - you have to use both. Generally, the uplink and downlink frequencies are relatively close to each other however, the 1700 AWS band has uplink and downlink spread quite a distance apart. Uplink is in the 1700MHz range, downlink is in the 2100MHz range and both have to be used. In the US, 1700 & 2100 is essentially one band.
1900MHz (the PCS band) isn't 3G for T-Mobile (although they technically could put it there at some point.) Right now, 1900MHz for T-Mobile is EDGE voice and data. Most other carriers do have 3G on the 1900MHz band, T-Mobile just doesn't have enough spectrum available in that band.
In short: A phone that supports UMTS 2100 will not work for T-Mobile US 3G. A phone that supports AWS/UMTS 1700 will work for T-Mobile US 3G but not for European 2100 3G. (And 1900MHz PCS will give you traditional EDGE on T-Mobile US.)
Malik05 said:
Do you know who this user is? maybe i can PM him and get some details...i knew i wasn't going to get 3G with the diamond, but after talking to the rep. i kind of want to look into it more since there may be a possibility.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=427755
post 3, ll
and
http://forum.xda-developers.com/showthread.php?p=2610960#post2610960
so i bought a unlocked phone on ebay bout a few months from now. i live in canada, also im in rogers network and everything works fine except my connection. i can only go 2g/edge speed but not 3g!! i have a t-mobile phone unlocked.. anybody know what i can do to get a 3g connection? do i need to install a new image or rom!!!!? please help
You may be out of luck on 3G. To the best of my knowledge, I believe Roger's 3G network runs on the 850 and 1900 MHz bands. However, the G1 runs on T-Mobile's 1700 and 2100 MHz bands. So Edge is the best you'll get (speed-wise).
TaurusBullba said:
You may be out of luck on 3G. To the best of my knowledge, I believe Roger's 3G network runs on the 850 and 1900 MHz bands. However, the G1 runs on T-Mobile's 1700 and 2100 MHz bands. So Edge is the best you'll get (speed-wise).
Click to expand...
Click to collapse
T-Mobile's rollout of UMTS in the US will focus on the 2100/1700 MHz bands, whereas UMTS coverage in Canada is being provided on the 850 MHz band of the Rogers Wireless network. I think 1900 was added later as well.
My HTC HD is edge (2G only). But I use a lot of WiFi when ever possible.
I'm only getting EDGE connection /speeds from t-mobile. However according to a press release a couple months back, my area was supported (goleta/Santa Barbara area) for HSPA+). How can I enable this network or why am I only getting edge? I am using a Criskelo rom.
Correct me if I am wrong but international note can ONLY be used at edge with US T-Mobile. The note doesn't have the radios for the Baseband of T-Mobile frequencies. As I have read in the forums in the past only at at&t can connect the note for 3g, not 100% sure for the last.
Sent from my GT-N7000 using Tapatalk 2
seraphus said:
I'm only getting EDGE connection /speeds from t-mobile. However according to a press release a couple months back, my area was supported (goleta/Santa Barbara area) for HSPA). How can I enable this network or why am I only getting edge. I am using a Criskelo rom.
Click to expand...
Click to collapse
if you are on GSM network .. switch to WCDMA only network in your network settings
3G/4G of T-Mobile USA uses a relatively rare frequency 1700/2100 UMTS Band IV (aka AWS). The Note can't support it. You choice is either stick at the EDGE speed or switch to AT&T(or its MVNO).
TMOUS is starting to refarm their 3G/4G frequency to which the Note will support. But I think it might takes years to get the work done.
Braxos said:
Correct me if I am wrong but international note can ONLY be used at edge with US T-Mobile. The note doesn't have the radios for the Baseband of T-Mobile frequencies. As I have read in the forums in the past only at at&t can connect the note for 3g, not 100% sure for the last.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
tmous is rolling out 1900 frequencies so it will be able to get 3g and possibly 4g depending on where you are... currently there are members on here from the northwest that have confirmed this working...
as for the question at hand i would contact tmo and ask if the towers are running and where in your area to make sure... the auto gsm/wcdma mode should work fine because if you leave the area where there is 1900 and are on wcdma only you will get no svc...
Well here's the press release: newsroom.t-mobile.com/articles/new-4g-markets-nov2011
Hmm...I'm a total noob at this stuff and guess I was assuming I was gonna get HSPA+ due to it listing 1900 mhz in Santa Barbara on the Wirelessadvisor website in a zipcode search.
Am I wrong to assume that if the network is 1900 mhz band? Changing the gsm/wcdma didn't do anything. Guess I should contact t-mobile to make sure?
meant model Z.........So I just read about this model and see it has AWS and 700 Mhz for LTE - does this mean if I get this phone it will work on AT&T LTE in the U.S? Anyone tried this yet?
also.....Negri Electronics has a unlocked Z Tmobile in black that says it has 700Mhz and AWS LTE bands but they say it can only be used outside U.S. (they list it as international) that AT&T would block it? WTF over?
i dont think at&t will block it. if it supports the at&t lte bands it will get lte but there are multiple lte bands for at&t so if it only supports one of them lte will be spotty depending on the area the phone is used in
skinsfanbdh said:
i dont think at&t will block it. if it supports the at&t lte bands it will get lte but there are multiple lte bands for at&t so if it only supports one of them lte will be spotty depending on the area the phone is used in
Click to expand...
Click to collapse
Yeah, I don't know......I chatted with a rep there and all he would say is that you cannot use this in the U.S. - I asked if this is because tmobile has a contract w/ Sony and he said I'd have to ask Sony about that. It almost seems like that is what they have to say - but i'm wondering if it would work.
this is what the site says about the frequencies for this model:
2G Network GSM 850 / 900 / 1800 / 1900
3G Network WCDMA 850 / 900 / 1700 / 1900 / 2100
4G Network LTE 700 / 850 / 1700 / 1900 / 2100
i think other users in this forum are using one of the xperia z's with at&t
skinsfanbdh said:
i think other users in this forum are using one of the xperia z's with at&t
Click to expand...
Click to collapse
Yeah, but are they getting LTE? Why the hell Sony chose to release the ZL with AT&T LTE frequencies but not the Z (at least not officially) is beyond me......
probably the same reason it took 6 months for tmobile to get it(which is the the one i have)
I already tried flashing 6616 baseband. Unfortunately, it doesn't have 700 band LTE. It is from Bell, even though they state that their 6616 has AWS and 700.
I'm currently using 6506 baseband but I can't get access to at&t LTE network.
Sent from my C6606 using Tapatalk 4
So, has anyone successfully gotten LTE on AT&T anywhere with the Xperia Z?
yes in So Cal on 1700 mhz towers only
keith777 said:
So, has anyone successfully gotten LTE on AT&T anywhere with the Xperia Z?
Click to expand...
Click to collapse
I have successfully had LTE on AT&T in Southern California but that is the only location..
I was hoping the ATT S5 would get UMTS 900 and LTE Band 20 (Europe Digital Dividend 800 Mhz), I was disappointed to see that it does not.
I live 45 min. North, Northwest of Philly and AT&T is the best carrier in PA - HANDS DOWN! I also travel every week, all over the US for work - and I'm very happy with AT&T in general. One thing I noticed on my S4 is that I could not get LTE in Burlington, VT on it - but I had full bars of LTE on my iPad Air. Side question; What band does ATT use for LTE there that the S4 don't support?
Anyways,
on the S4 I was able to activate AWS freq. for UMTS by flashing it. I need to do this for UMTS 900 and/or (pref. AND LTE Band 20, since I travel to Northern Norway all the time - and there is only UMTS 900 and LTE 20 some places there.... If I cannot have the phone flashed to have the current bands AND the wanted bands - would there be a way to flashing it back and forth from ATT to "Euro/International" mode?
M:good:
mgullvik said:
I was hoping the ATT S5 would get UMTS 900 and LTE Band 20 (Europe Digital Dividend 800 Mhz), I was disappointed to see that it does not.
I live 45 min. North, Northwest of Philly and AT&T is the best carrier in PA - HANDS DOWN! I also travel every week, all over the US for work - and I'm very happy with AT&T in general. One thing I noticed on my S4 is that I could not get LTE in Burlington, VT on it - but I had full bars of LTE on my iPad Air. Side question; What band does ATT use for LTE there that the S4 don't support?
Anyways,
on the S4 I was able to activate AWS freq. for UMTS by flashing it. I need to do this for UMTS 900 and/or (pref. AND LTE Band 20, since I travel to Northern Norway all the time - and there is only UMTS 900 and LTE 20 some places there.... If I cannot have the phone flashed to have the current bands AND the wanted bands - would there be a way to flashing it back and forth from ATT to "Euro/International" mode?
M:good:
Click to expand...
Click to collapse
AT&T uses bands 2, 4, 5, & 17 for LTE. Band 17 (700mhz) is what most of their LTE is on. That's why the signal is always good. I am starting to see Band 2 (1900mhz) in some areas. I saw Band 4 (AWS) in Chicago in a few areas (probably were capacity is weak).
Yes, with the S4 you could unlock the AWS frequencies. I do not know if you could flash UMTS 900 with an S4. You will not be able to flash anything with frequencies on the S5 as AT&T has locked down the phone entirely. It will follow in the Note 3's footsteps.
I think they discourage people unlocking their devices and using them on other networks. AT&T is forgetting what GSM is all about IMO. If AT&T LTE is not that important to you, you may want to consider the international variant which will support your European frequencies. It will NOT work on AT&T LTE though.
Hope I helped.
MattMJB0188 said:
AT&T uses bands 2, 4, 5, & 17 for LTE. Band 17 (700mhz) is what most of their LTE is on. That's why the signal is always good. I am starting to see Band 2 (1900mhz) in some areas. I saw Band 4 (AWS) in Chicago in a few areas (probably were capacity is weak).
Yes, with the S4 you could unlock the AWS frequencies. I do not know if you could flash UMTS 900 with an S4. You will not be able to flash anything with frequencies on the S5 as AT&T has locked down the phone entirely. It will follow in the Note 3's footsteps.
I think they discourage people unlocking their devices and using them on other networks. AT&T is forgetting what GSM is all about IMO. If AT&T LTE is not that important to you, you may want to consider the international variant which will support your European frequencies. It will NOT work on AT&T LTE though.
Hope I helped.
Click to expand...
Click to collapse
AT&T is most important, as I am in the US 95% of the time. At least the S5 will have LTE 1800 and 2600. My hometown in Norway should get LTE 1800 later this year. So at least I will have GSM 900, UMTS 2100 and LTE 1800.
Do you, or anyone else know if AT&T will unlock Phones on the Next plan? I got the S4 full price, but I'm using the Next plan for the S5.
M
mgullvik said:
AT&T is most important, as I am in the US 95% of the time. At least the S5 will have LTE 1800 and 2600. My hometown in Norway should get LTE 1800 later this year. So at least I will have GSM 900, UMTS 2100 and LTE 1800.
Do you, or anyone else know if AT&T will unlock Phones on the Next plan? I got the S4 full price, but I'm using the Next plan for the S5.
M
Click to expand...
Click to collapse
They'll unlock it if its paid off entirely. But that doesn't mean you can't unlock it yourself.