My sister owns this tab, and she wanted me to update its firmware from stock 2.2 (froyo) to 2.3.6 (gingerbread). I followed a guide on youtube, and I downloaded the files provided in the description tab. The flashing went smoothly, but after rebooting, the tab won't get past the samsung logo. Have I killed her tab? If I did, she'd kill me too Please help..
Additional info:
Model: GT-P1000
FCC ID: A3LGTP1000
I think she bought the tab in germany, if so then what firmware should I download?
Is it possible to just download any FW file to use for flashing? If not can anyone please direct me to the proper firmware?
I've been googling for a day..Download 2 firmwares but still no luck.. also tried wiping user data and cache.
Thanks for any help..much appreciated!
You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium
Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!
chir0n said:
Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!
Click to expand...
Click to collapse
I forgot to mention did you boot into recovery and wipe data and see if you got it to boot? Often times after an update you have to boot into stock recovery and wipe cache and factory reset but if that failes just use the pit gt-p1000 and the firmware I would try froyo then if that fails to work do 2011 then if that don't work try 2012 but always use the pit file if none of these work then it means your internal sdcard gave out. Also before trying all of this try doing a factory reset in recovery and if you get errors post a screenshot of it so I get a better idea of what happened. Hope this helps
EDIT: sorry just read the part where u already did the factory reset and wipe cache was it in stock recovery? And did you get any errors?
Sent from my SPH-L710 using xda premium
Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..
chir0n said:
Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..
Click to expand...
Click to collapse
Oh I see what happened has this tablet previously been rooted or on a custom ROM? Because normally when on a custom ROM specially with our tablets the partition format changes from rfs to ext4 because its faster and more reliable. That being said what your experiencing is your tablet trying to boot but its not the right format because touch wiz only runs on rfs format. This happened to my tablet too when I tried to restore to stock and all I did was flash the pit and the stock firmware in Odin and it booted right up. Took my tablet about 20 minutes the first time to boot up though but it eventually did.
Sent from my SPH-L710 using xda premium
oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!
chir0n said:
oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!
Click to expand...
Click to collapse
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium
jazz995756 said:
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?
chir0n said:
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?
Click to expand...
Click to collapse
OTA stands for over the air update and well do you still get errors in recovery? And did you flash that pit file with all the other firmwares u had?
Sent from my SPH-L710 using xda premium
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium
That is because yours is CDMA tab.
Overcome is for GSM only.
Sent from my GT-P1000 using xda app-developers app
jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
priyana:
That is because yours is CDMA tab.
Overcome is for GSM only.
Click to expand...
Click to collapse
That's some really bad thing that's gone, anyway if you can afford the $170 then why not? instead of just forsaking the tab away. again thanks for all the help dude, it was my first time flashing android devices, but not nokias. it was different in someway, anyhow just always be cautious of what you do always. please close thread tnx
i need help
chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
jazz995756 said:
You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
please can i have the link to the pit file, the link is hosted on hotfile which is now down.
You may want to use the Overcome Method: http://forum.xda-developers.com/showthread.php?t=1881981
Sent from my GT-P1000 using XDA Premium 4 mobile app
tunjicool said:
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
please can i have the link to the pit file, the link is hosted on hotfile which is now down.
Click to expand...
Click to collapse
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).
xz124 said:
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).
Click to expand...
Click to collapse
thank you for this reply. though it came a bit late.
the device is dead!!!
if i on it now, it will only on the camera flash light as long as i hold the power button and then off the light when i release the button.
i don't know what to do.
i guess i can still get help on reviving it somehow or else i should start planning the burial .
Related
Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.
priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.
No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.
You can extract modem.bin from the rom that you have downloaded.
uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do
Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz
Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app
Hi, I have got my partners phone stuck, it will only go onto the Downloading screen. I cant get on kies or the recovery screen. Can anyone help me just want to get it back to a standard stock rom then update on kies later. A nice easy method would be good - odin thingy
Cheers Stu.
What have you done with it. And what happened to get stuck in download mode. Detail it and it will be easier to solve...
jabrif said:
What have you done with it. And what happened to get stuck in download mode. Detail it and it will be easier to solve...
Click to expand...
Click to collapse
It's not relevant how he got it into this situation, he's just looking for a way to bring it back to life.
Sent from my GT-I9000 using xda premium
---------- Post added at 09:32 AM ---------- Previous post was at 09:31 AM ----------
stuxda24 said:
Hi, I have got my partners phone stuck, it will only go onto the Downloading screen. I cant get on kies or the recovery screen. Can anyone help me just want to get it back to a standard stock rom then update on kies later. A nice easy method would be good - odin thingy
Cheers Stu.
Click to expand...
Click to collapse
I can't give much detail because I'm not on my Pc but take a look at this http://forum.xda-developers.com/showthread.php?t=1796807
Sent from my GT-I9000 using xda premium
you should download a stock rom and use odin to flash it ... it should fix it (i had this problem several times )
Here you go friend...this should solve your problem
Flashing tutorial for dummies:
http://forum.xda-developers.com/showthread.php?t=1494493
Just flash stock Boot loader with ODIN and everything will be OK. Your partners phone is not bricked.
Hi managed to sort usng heimdall
So im lost. I flashed the wrong rom and bricked my vzw tab. First time iv ever bricked any device unfortunately. How do i fix it? Odin? Im not boot looping and i cant get into recovery but i believe i can get into download mode. And advice and id be very thankful. Or do i have a new paperweight
Sent from my LG-LS970 using xda app-developers app
Odin/heimdall flash stock rom in download mode should take care of it.
Sent from my GT-P1000 using xda app-developers app
Thanks im.stressed because its not charging...that okay to odin on low batt
Sent from my LG-LS970 using xda app-developers app
so im working on this today and i cant get into download mode. i only see the phone and a computer with a orange triangle in the middle. i saw a video of how to fix it but i couldnt download the files. can anyone please point me to the right thread.
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
iv been messing with it all day and odin wont see it. any tricks?
Which file to flash?
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Not for ruthlessbeatle, as this is for GSM P1000 only.
Sent from my GT-P1000 using xda app-developers app
hotstart said:
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1133590
this helped me a ton i was bricked and now im back kinda of. remember read everything 2 twice if you have to. i could use a hand again though im back to bootlooping at the vzw screen after i used the link above. i wiped after flash but still bootlooping. its not cuz i converted to ext4 because i saw others who had converted and didnt have a problem. any advice on how i get this bad boy to spot boot looping thanks
priyana said:
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Click to expand...
Click to collapse
Hi priyana,
thank you for your advice!
Currently I am stuck because in the middle of the flashing process the tab switched off maybe due to a low battery.
But is starting with the secondary download screen again - so I am hoping to be able to load it bit better for the next try.
Will let you know whatever outcome there will be.
Cheers
Hi, two days ago I've soft bricked my tab: GT-P1000(SPAIN/VODAFONE).And yesterday I successfully unbricked it using these files:
P1000BUJQ5_P1000ATLJQ1_ATL.zip
P1_add_hidden.pit
When I tried to boot it just got stuck on the samsung logo, I saw some tutorials saying that you should Factory Reset it, but I got this Error:
rfs format failed on /dev/block/stl10
Please I really need some help
Thanks in advance.
please I need help
up
oussito said:
Hi, two days ago I've soft bricked my tab: GT-P1000(SPAIN/VODAFONE).And yesterday I successfully unbricked it using these files:
P1000BUJQ5_P1000ATLJQ1_ATL.zip
P1_add_hidden.pit
When I tried to boot it just got stuck on the samsung logo, I saw some tutorials saying that you should Factory Reset it, but I got this Error:
rfs format failed on /dev/block/stl10 .
Click to expand...
Click to collapse
Tried this guide?
immortalneo said:
Tried this guide?
Click to expand...
Click to collapse
Yeah I used that guide to unbrick my Tab, it successfully unbricked but I got stuck in the samsung logo.
I tried to factory reset but that error showed up.
Well can I still flash it with dbdata?
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
Good for you! Thanks for sharing! Please add [SOLVED] to the title of your post! :good:
immortalneo said:
Good for you! Thanks for sharing! Please add [SOLVED] to the title of your post! :good:
Click to expand...
Click to collapse
It's done xD
thanks men
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
thanks its work for me to
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
I have the same problem.
May i know where to download dbdata.rfs.tar ?
After downloading what should I do? Do I need .PIT files?
Thank you
I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:
Jarmezrocks said:
I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:
Click to expand...
Click to collapse
Thank you Jamez. Appreciate.
So I just upload the attached file right?
---------- Post added at 01:36 PM ---------- Previous post was at 01:30 PM ----------
I came across the following blog
galaxytabupdate.blogspot.sg
But note that gingerbird 2.3.3 link is not working redirecting to some video downloader.
Also the dbdata file size seems lot different.
ramsforums said:
Thank you Jamez. Appreciate.
So I just upload the attached file right?
---------- Post added at 01:36 PM ---------- Previous post was at 01:30 PM ----------
I came across the following blog
galaxytabupdate.blogspot.sg
But note that gingerbird 2.3.3 link is not working redirecting to some video downloader.
Also the dbdata file size seems lot different.
Click to expand...
Click to collapse
That was the one that I used that allowed my device to boot. I also noted that this file was a different size to the one in the stock firmware that I downloaded. I also found out that no matter how much I tried I could not get the device to even boot using stock carrier branded firmware? So yeah that is as much as I can give you mate. I am a n00b in these areas (have dev'd for SGS1 and a number of other devices but I am n00b here in Galaxy Tab section) so I am still learning about this device.
Jarmezrocks said:
That was the one that I used that allowed my device to boot. I also noted that this file was a different size to the one in the stock firmware that I downloaded. I also found out that no matter how much I tried I could not get the device to even boot using stock carrier branded firmware? So yeah that is as much as I can give you mate. I am a n00b in these areas (have dev'd for SGS1 and a number of other devices but I am n00b here in Galaxy Tab section) so I am still learning about this device.
Click to expand...
Click to collapse
Thanks James. I could able to recover
This is what I did
followed the blog galaxytabupdate.blogspot
downloaded all the files from the link on the blog except gingerbird. Ginger bird file for my carrier I got it from samsung-updates.com
my device booted in gengerbird.
thanks I hope you can recover your device
how did you do it and made odin reconize your tab
oussito said:
I solved the problem, I flashed using dbdata.rfs.tar and I could run GB 2.3.6
You can mark this thread as solved.
Click to expand...
Click to collapse
i am in exactly the same turn as you are after the update i cant use odin because odin wont reconize my phone i also want to use dbata.rfs an use ginger bread
please help i am begging you'
Jarmezrocks said:
I had the same issues as you guys. Gingerbread is so freakin unstable its not funny. I want to get off it but there seems to be no normal way to do this for my particular tab? Cause all the guides and recommendations I have followed do NOT work. I have posted my own thread in this section and have had not a single person reply? Is this place dead now? Are there no XDA members out there who are able to help?
Question. If a bootloader is locked at Froyo and you flash an unlocked Gingerbread bootloader is it now unlocked?
Anyway to the guy above me the attachment should be able to help you. Flash it with Odin as PDA :good:
Click to expand...
Click to collapse
Thank you about sharing the file to FIX the System Partition ;D
dbdata.rfs.tar only helped me .
Thanx very much, I managed to fix my tab too...
Where can I get the link
Hi guys sorry to post here, but I tried downloading the rfs file and the link's down, can you please reupload it or point me to where I can find it?
hi, i upgraded my tab p1000 to cm10, but now i want to go back to original version, i tried restoring using nanadroid backup, but after doing this i am stuck on boot screen, please help out.. i searched forum but its too techinacal for me, please sugeest some easy way
neteater said:
hi, i upgraded my tab p1000 to cm10, but now i want to go back to original version, i tried restoring using nanadroid backup, but after doing this i am stuck on boot screen, please help out.. i searched forum but its too techinacal for me, please sugeest some easy way
Click to expand...
Click to collapse
What was your stock rom version?
Hazaiez said:
What was your stock rom version?
Click to expand...
Click to collapse
it was 2.3.3
Restock. Then install cwm, then restore from nandroid. You can just restore nandroid from a different partition scheme.
Sent from my GT-N7100 using xda app-developers app
---------- Post added at 07:08 AM ---------- Previous post was at 07:08 AM ----------
I meant *can't* restore
Sent from my GT-N7100 using xda app-developers app
As Priyana said you have to restock your system if you want to downgrade from jb based rom to gb which are not working on the same file system, try the overcome guide to do so.
Sent from my GT-P1000 using xda app-developers app
32 329595533
any detailed guide to do overcome, i also messed my USB cable so might need to buy a new cable, btw will odin detect my phone, its going in download mode but odin not getting it
neteater said:
any detailed guide to do overcome, i also messed my USB cable so might need to buy a new cable, btw will odin detect my phone, its going in download mode but odin not getting it
Click to expand...
Click to collapse
Attached is the Overcome guide, after extracting and executing index.html, go to paragraph Re-“Stocking” Yer System… and follow the instructions, make sure to choose the appropriate files for your device, you can either preserve the GB stock rom or install the overcome custom rom.
new links for the dead ones are here : http://forum.xda-developers.com/showthread.php?t=1881981
Hazaiez said:
Attached is the Overcome guide, after extracting and executing index.html, go to paragraph Re-“Stocking” Yer System… and follow the instructions, make sure to choose the appropriate files for your device, you can either preserve the GB stock rom or install the overcome custom rom.
new links for the dead ones are here : http://forum.xda-developers.com/showthread.php?t=1881981
Click to expand...
Click to collapse
ok trying it.. links given in guide are dead so searched goolge to get all files, hope these are the same, will post back here once its finished, as my tab is of battery, so putting it on charging, also bought an original tab data cable..lets see if i could do that or need to go to repair shop
neteater said:
ok trying it.. links given in guide are dead so searched goolge to get all files, hope these are the same, will post back here once its finished, as my tab is of battery, so putting it on charging, also bought an original tab data cable..lets see if i could do that or need to go to repair shop
Click to expand...
Click to collapse
Don't look away, new links are right here: http://forum.xda-developers.com/showthread.php?t=1881981
also be sure (important) that downloaded files suit your device.
ok did all steps.. my tab reboots i listened to old original boot sound but now its stuck on samsung logo which is blinking
Are you sure you've downloaded the correct files for your device?
Sent from my GT-P1000 using xda app-developers app
i downloaded the rom from sammobile for india version and using the same procedure given in file shared by you, i am able to boot into default recovery not cwm and can read option like reboot/reset/wipe/cache/install from sd..
neteater said:
i downloaded the rom from sammobile for india version and using the same procedure given in file shared by you, i am able to boot into default recovery not cwm and can read option like reboot/reset/wipe/cache/install from sd..
Click to expand...
Click to collapse
Did you try to install the overcome custom rom?
it worked problem solved bingo.. rep added to you
neteater said:
it worked problem solved bingo.. rep added to you
Click to expand...
Click to collapse
good news