Database Develop

Call drop issues

I just flashed my captivate the other day to 2.3.3
kernel version 2.6.35.7-I897uckf1-CL273832
build gingerbread.uckf1
baseband I9000UGJL2
for some reason everytime i get a call it rings once then i lose all signal and it sends the caller to vm. I know its a modem issue and i have searched high and low. can someone please give me the steps to fix this issue please.
EDIT: I did a factory reset and it fixed the issue but When I answer calls now or make outgoing I cannot hear anything through the phone and through the speaker. PLEASE HELP

U need to install an i897 modem instead of the i9000 u have. Modems and Kernels have to be matched... i897/i897 and i9000/i9000.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Flash KF1, KE3, or KB1 modem.
See Modem Stickied Thread attatchment paperclip at the Title of the thread to find these.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

im sorry im a newb. can you send me a link to the modem i would need to download and flash with odin? and instructions if possible thank you.

SHIFTY666 said:
im sorry im a newb. can you send me a link to the modem i would need to download and flash with odin? and instructions if possible thank you.
Click to expand...
Click to collapse
Modem Stickied Thread Link U will have to back out to the Title of the Thread to see the modems that are behind the paperclip. Try the cwm3 uckf1. U can download it and extract the "modem.bin" out of it and open Odin3 v1.81 and place the modem.bin in the Phone slot and having already connected ur phone in download mode, hit start. Then u should be good to go.
View attachment 693540

so i found the KF1.zip and the KE3.zip and put them in the root of the phone and tried to do them with CWM and i keep getting an error during insall. any other suggestions or links to get the file so i can use odin to do it or any other trick to get back to stock modem just to get it working again.

sorry posted i guess same time as you lol. i still dont see that file on that page and dont know what paperclip you are talking about?
i see a uckb1 but not the one you said. can you email me the file please im at [email protected] thanks for the help

Paperclip at [Modems] Thread
If u want to go back to Stock i897uckf1 Gingerbread, use the last link below in my signature.

found the paperclip. sorry about that. do you load it under phone in odin the modem. bin file?

SHIFTY666 said:
found the paperclip. sorry about that. do you load it under phone in odin the modem. bin file?
Click to expand...
Click to collapse
Flash using CWM.

^^ yes... and that should get u back to good.

i think i fixed it all now. Thank you for all your help.

all good think its all fixed now!!!! thanks guys

Good deal. And glad to help.

welll new issue now heh. so i restored all my apps from TB and they all went back in fine. but now its doing the ring once and go to VM again. what could be causing this??

Galaxy Tab 8.9 Dangerous odd behavior??

I hope some one can help. I have never seen anything like this. I have an 8.9 GT-P7310 and its acting very strange. I have tried to Odin anything I can from stock ICS to custom recovery to stock honeycomb and stock recovery. Everything, I repeat everything fails. It looks like it will go and fails everytime. In this case I would look at it as a brick with the firmware upgrade failure message but no. All I have to do is boot it into recovery reset and it turns on. I just cant do anything :crying: Also the tab flickers red whenever I make a selection but I am out of ideas here..
I have a new Sam cable and tried all Usb ports

Make sure to turn off all the developer options. Sounds like you have USB debugging and 'Screen Flash' turned on ... at least.

boscorama said:
Make sure to turn off all the developer options. Sounds like you have USB debugging and 'Screen Flash' turned on ... at least.
Click to expand...
Click to collapse
Thanks for the quick reply.. Ill check it right now and report back
Edit: Odin still fails

I feel like it has a corrupted bootloader or so,
how to circumvent this?
well maybe if you use the pit file to repartition the tablet then install a boot loader from an old and complete stock honeycomb would make a difference.
you can check sammobile for a stock complete honey comb and check additional downloads for a PDF to describe how to flash using ODIN and another link to the 7300 and 7310 pit file to repartition.
after all I am not sure, but I am rather giving a shot, so you might wait for a more experienced senior user who can figure it out straight

prince93 said:
I feel like it has a corrupted bootloader or so,
how to circumvent this?
well maybe if you use the pit file to repartition the tablet then install a boot loader from an old and complete stock honeycomb would make a difference.
you can check sammobile for a stock complete honey comb and check additional downloads for a PDF to describe how to flash using ODIN and another link to the 7300 and 7310 pit file to repartition.
after all I am not sure, but I am rather giving a shot, so you might wait for a more experienced senior user who can figure it out straight
Click to expand...
Click to collapse
I felt like I needed the pit file but wasn't sure. I will look for it but doubt that I will find. If you know where to get the pit file please get me the link. I appreciate it.
Edit: Can I just pull the pit file from a stock ROM
ReEdit: I think I found what I need. Ill report back.

addictedhacks said:
I felt like I needed the pit file but wasn't sure. I will look for it but doubt that I will find. If you know where to get the pit file please get me the link. I appreciate it.
Edit: Can I just pull the pit file from a stock ROM
ReEdit: I think I found what I need. Ill report back.
Click to expand...
Click to collapse
you can find the pit file at samfirmware if you search for the tab in "firmware and files"
But I'm really not sure of this. I'm just thinking with you, so my advice is to wait some time for a senior member who can help you without guessing, because they may render the tablet unusable, so it might be abit dangerous to go for these guesses right now .

prince93 said:
you can find the pit file at samfirmware if you search for the tab in "firmware and files"
But I'm really not sure of this. I'm just thinking with you, so my advice is to wait some time for a senior member who can help you without guessing, because they may render the tablet unusable, so it might be abit dangerous to go for these guesses right now .
Click to expand...
Click to collapse
Ok now i am screwed tablet stuck in download.
Doesnt work with the pit file either.

Have you flashed the pit file with repartition ticked?
Also after repartitoning, have you flashed the bootloader of stock honeycomb then flashed a stock honeycomb for your tablet? (@ PDA & CSC)?
Sent from my GT-P7300 using xda app-developers app

prince93 said:
Have you flashed the pit file with repartition ticked?
Also after repartitoning, have you flashed the bootloader of stock honeycomb then flashed a stock honeycomb for your tablet? (@ PDA & CSC)?
Sent from my GT-P7300 using xda app-developers app
Click to expand...
Click to collapse
I did... There is only one and only one thing that will flash successfully and thats the pit. Nothing else will flash.

addictedhacks said:
I did... There is only one and only one thing that will flash successfully and thats the pit. Nothing else will flash.
Click to expand...
Click to collapse
Have you checked the service manual for changing the software for the tablet on samfirmware?
I read that after you flash the pit file, you should remove the battery then connect to odin and flash the bootloader, PDA, CSC files from a previous complete stock.
Please read the service manual carefully from samfirmware to check the steps accuratley.
Sent from my GT-P7300 using xda app-developers app

prince93 said:
Have you checked the service manual for changing the software for the tablet on samfirmware?
I read that after you flash the pit file, you should remove the battery then connect to odin and flash the bootloader, PDA, CSC files from a previous complete stock.
Please read the service manual carefully from samfirmware to check the steps accuratley.
Sent from my GT-P7300 using xda app-developers app
Click to expand...
Click to collapse
Yea I tried that just now. No luck... I am going to read the instructions but I am sure I have done everything correctly.
Edit: I am doing everything correctly. Only the Pit will flash successfully. Since I have flashed the pit I have lost my stock recovery. Before I used to just factory reset and turn it back on now I cant..

Need some stock t679 files

Hey guys forgive me in advance I seem to always post in the wrong spots. I need some stock files for the t679. I can’t find them anywhere. I looked hard so now I’m asking. Can anyone please get me the stock:
.pit
Factor FS
Kernel (zImage)
Param.lfs
Primary Bootloader
Secondary Bootloader
CSC Cache
Database Data
Modem
Recovery
Man I would really appreciate anyone who could zip these for me or even just point me to a link. Like I said I’ve been trying really hard to find them and now I give up and turn it over to the gooroos. Thanks guys.

aaront596 said:
Hey guys forgive me in advance I seem to always post in the wrong spots. I need some stock files for the t679. I can’t find them anywhere. I looked hard so now I’m asking. Can anyone please get me the stock:
.pit
Factor FS
Kernel (zImage)
Param.lfs
Primary Bootloader
Secondary Bootloader
CSC Cache
Database Data
Modem
Recovery
Man I would really appreciate anyone who could zip these for me or even just point me to a link. Like I said I’ve been trying really hard to find them and now I give up and turn it over to the gooroos. Thanks guys.
Click to expand...
Click to collapse
Check the wiki. So Google xda wiki, go there and find the phone, the stock files are there.
Sent from my Nexus 7 using xda app-developers app

theAPANT said:
Check the wiki. So Google xda wiki, go there and find the phone, the stock files are there.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I've been there and all over the web several times trying to locate these files. I have the firmware, but I have not been able to find or extract the files I listed above inside the firmware. I figured they must be in there but I couldn't get to them. Is this the file you were talking about?
T679LG3.tar
I have that and have tried to get the files I need out of it but haven't been able to. Is there a way to do that or were you referring to something else? Thanks for the help.

http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G
All files are here to flash to stock or Odin to stock.
Sent from my CM10 Linero Odexed Powered by Evil

afwolfpacked said:
http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G
All files are here to flash to stock or Odin to stock.
Sent from my CM10 Linero Odexed Powered by Evil
Click to expand...
Click to collapse
Where? I’ve read the entire page and never saw a link where I could download these files
.pit
Factor FS
Kernel (zImage)
Param.lfs
Primary Bootloader
Secondary Bootloader
CSC Cache
Database Data
Modem
Recovery
What am I missing?

aaront596 said:
Where? I’ve read the entire page and never saw a link where I could download these files
.pit
Factor FS
Kernel (zImage)
Param.lfs
Primary Bootloader
Secondary Bootloader
CSC Cache
Database Data
Modem
Recovery
What am I missing?
Click to expand...
Click to collapse
I am confused. What do you need this list of files for? What are you trying to accomplish with them?

I am also confused as to files needed. The link I provided will get you to stock via cwm or Odin. If what you want to do is build then the github is where to look.
Sent from my CM10 Linero Odexed Powered by Evil

afwolfpacked said:
I am also confused as to files needed. The link I provided will get you to stock via cwm or Odin. If what you want to do is build then the github is where to look.
Sent from my CM10 Linero Odexed Powered by Evil
Click to expand...
Click to collapse
Right I understand but I'm not using cwm or Odin at all. I'm sorry I'm not trying to be confusing I just need those files I asked for. If I can extract them from the firmware let me know, but I've tried that already. Yeah, let’s just say I'm trying to think about building a little maybe, not sure yet.
So the "github" is a place I can find these files? Where do I find the” github?” Forgive my ignorance I’m just getting going with all this. Again I’m not trying to flash to stock via Odin or cwm. Thanks guys.

aaront596 said:
Right I understand but I'm not using cwm or Odin at all. I'm sorry I'm not trying to be confusing I just need those files I asked for. If I can extract them from the firmware let me know, but I've tried that already. Yeah, let’s just say I'm trying to think about building a little maybe, not sure yet.
So the "github" is a place I can find these files? Where do I find the” github?” Forgive my ignorance I’m just getting going with all this. Again I’m not trying to flash to stock via Odin or cwm. Thanks guys.
Click to expand...
Click to collapse
OK, zimage is in boot.IMG , Google how to extract. The other stuff i don't know why you want to mess with that stuff, especially the boot loaders, those can get a hard brick. If you are just trying to compile a ROM, go to exhibit cm9 jocala thread and scroll to building instructions. Those are way out of date, but you can figure stuff out from there. github.com/arco is good, so is github.com/camcory, find files change them, whatever
Sent from my Nexus 7 using xda app-developers app

Please help me

So im lost. I flashed the wrong rom and bricked my vzw tab. First time iv ever bricked any device unfortunately. How do i fix it? Odin? Im not boot looping and i cant get into recovery but i believe i can get into download mode. And advice and id be very thankful. Or do i have a new paperweight
Sent from my LG-LS970 using xda app-developers app

Odin/heimdall flash stock rom in download mode should take care of it.
Sent from my GT-P1000 using xda app-developers app

Thanks im.stressed because its not charging...that okay to odin on low batt
Sent from my LG-LS970 using xda app-developers app

so im working on this today and i cant get into download mode. i only see the phone and a computer with a orange triangle in the middle. i saw a video of how to fix it but i couldnt download the files. can anyone please point me to the right thread.

In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.

priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
iv been messing with it all day and odin wont see it. any tricks?

Which file to flash?
priyana said:
In that mode (secondary download mode) you should be able to flash if Odin detects.
Sometimes you need to keep trying until suddenly Odin detects it, and flash away.
Click to expand...
Click to collapse
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks

Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Not for ruthlessbeatle, as this is for GSM P1000 only.
Sent from my GT-P1000 using xda app-developers app

hotstart said:
Hi priyana,
I do have the same problem with my Galaxy Tab GT-P1000 and I am getting the same screen.
Did flash my device with Odin but the wrong something cwm10.x , forgot which one I used (well done I know )
It is a Vodafone (Germany) Galaxy Tab 7 (GT-P1000).
May I ask some questions:
What do you mean with "flash it away" what do you suggest him to use for flashing?
What is it? A Recovery? A Bootloader ...? And where can one find/get it?
Stupid questions - I got confused while reading thousands of threads on different websites...
But anyway, I would be thankful if you could point me to the right file I could use to flash on my Galaxy Tab ...
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1133590
this helped me a ton i was bricked and now im back kinda of. remember read everything 2 twice if you have to. i could use a hand again though im back to bootlooping at the vzw screen after i used the link above. i wiped after flash but still bootlooping. its not cuz i converted to ext4 because i saw others who had converted and didnt have a problem. any advice on how i get this bad boy to spot boot looping thanks

priyana said:
Hi Hotstart,
I mean flash a stock ROM in Odin once Odin see the tab.
One good complete ROM is gb-stock-save-v5 that Team Overcome packed together.
Follow my signature.
There is that and a PDF guide, you need the page 7 of it for what to put in Odin.
Click to expand...
Click to collapse
Hi priyana,
thank you for your advice!
Currently I am stuck because in the middle of the flashing process the tab switched off maybe due to a low battery.
But is starting with the secondary download screen again - so I am hoping to be able to load it bit better for the next try.
Will let you know whatever outcome there will be.
Cheers

[Q] Tab stuck on samsung logo after flashing, need help

My sister owns this tab, and she wanted me to update its firmware from stock 2.2 (froyo) to 2.3.6 (gingerbread). I followed a guide on youtube, and I downloaded the files provided in the description tab. The flashing went smoothly, but after rebooting, the tab won't get past the samsung logo. Have I killed her tab? If I did, she'd kill me too Please help..
Additional info:
Model: GT-P1000
FCC ID: A3LGTP1000
I think she bought the tab in germany, if so then what firmware should I download?
Is it possible to just download any FW file to use for flashing? If not can anyone please direct me to the proper firmware?
I've been googling for a day..Download 2 firmwares but still no luck.. also tried wiping user data and cache.
Thanks for any help..much appreciated!

You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium

Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!

chir0n said:
Thank you very much atlast someone replied!
Anyhow i downloaded the pit(s) for my device, but i got 4 pit files, (gt-p1000_mr, pit-909, pit-EUR and pit-p1) which one do i have to use?
Also i already downloaded 2 germany firmwares, one is released 2011, the other 2012. Theyre both at version 2.3.6, should i use them? or do i have to download a 2.2 froyo firmware (you said restore)
I'm really confused, but i'll try them all now. thanks very much!!!!!!
Click to expand...
Click to collapse
I forgot to mention did you boot into recovery and wipe data and see if you got it to boot? Often times after an update you have to boot into stock recovery and wipe cache and factory reset but if that failes just use the pit gt-p1000 and the firmware I would try froyo then if that fails to work do 2011 then if that don't work try 2012 but always use the pit file if none of these work then it means your internal sdcard gave out. Also before trying all of this try doing a factory reset in recovery and if you get errors post a screenshot of it so I get a better idea of what happened. Hope this helps
EDIT: sorry just read the part where u already did the factory reset and wipe cache was it in stock recovery? And did you get any errors?
Sent from my SPH-L710 using xda premium

Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..

chir0n said:
Yes i did try factory resetting and wiping off cache data every flash/recovery i do, but it doesnt help. when i reset userdata, it always says that it cannot access "system/csc/via/something", and rfs format failed on /dev/block/stl10. I know i'm doing something wrong and i just cant figure it out because there are thousands of threads here, sticky posts doesn't help..im no techie guy but im trying to deal with the situation with positive thinking.. anyway thanks for the help bud, please bear with me until i fix this off..thank you so much..
Click to expand...
Click to collapse
Oh I see what happened has this tablet previously been rooted or on a custom ROM? Because normally when on a custom ROM specially with our tablets the partition format changes from rfs to ext4 because its faster and more reliable. That being said what your experiencing is your tablet trying to boot but its not the right format because touch wiz only runs on rfs format. This happened to my tablet too when I tried to restore to stock and all I did was flash the pit and the stock firmware in Odin and it booted right up. Took my tablet about 20 minutes the first time to boot up though but it eventually did.
Sent from my SPH-L710 using xda premium

oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!

chir0n said:
oh, is that the case? but my sister's tab isnt rooted nor had any custom roms before i flashed it. it was on stock firmware.. would it really take that long (20mins+) for a newly flashed device to boot up? approximately how long would should i keep it stuck at the samsung logo before i quit? im willing to wait hours, just for the tab to work. im gonna flash it again using 2.3.6 gingerbread firmware and a pit file using odin, and gonna let it stand until i wake up later and report the results. thank you so much!
Click to expand...
Click to collapse
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium

jazz995756 said:
I would say wait 20 minutes or just stare at the Samsung logo if it appears to blink and stay at the Samsung logo then your still in a boot loop BTW how did you update the tab? If you did it correctly it should have been just OTA correct? Or did you flash it manually in stock recovery?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?

chir0n said:
i flashed it using odin the first time, using a german firmware+pit file i downloaded at sammobile. is that called stock recovery? YES, the samsung logo blinks, so i am in a boot loop now..how can i fix this.. my sister's getting angry now i really need to fix this asap
ps. what is OTA?
Click to expand...
Click to collapse
OTA stands for over the air update and well do you still get errors in recovery? And did you flash that pit file with all the other firmwares u had?
Sent from my SPH-L710 using xda premium

i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you

chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium

That is because yours is CDMA tab.
Overcome is for GSM only.
Sent from my GT-P1000 using xda app-developers app

jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
priyana:
That is because yours is CDMA tab.
Overcome is for GSM only.
Click to expand...
Click to collapse
That's some really bad thing that's gone, anyway if you can afford the $170 then why not? instead of just forsaking the tab away. again thanks for all the help dude, it was my first time flashing android devices, but not nokias. it was different in someway, anyhow just always be cautious of what you do always. please close thread tnx

i need help
chir0n said:
i fixed it, finally.
i followed instructions from the Overcome Rom 4.0 tutorials by sos_sifou which is located on the samsung galaxy tab general forum.
first, i downloaded the GB-stock-safe-v5 rom, flash the pda, pit, and the phone modem.bin file. i think what my error really is was i wasn't adding a modem file. after flashing, still i got a couple of errors in recovery mode BUT after it restarted by itself, it booted right away, no 20 minute waiting time. then from there, i was really happy that i managed to fix it but i had gone for a little more. i installed overcome kernel and rom which i was glad i did, its really fast now, and really stable. instructions are easy to follow, you cant miss anything but as pre se, you have to follow everything carefully.
thanks anyway for all the help dude, i wish you also could fix your bricked tab? i read your thread a while back, good luck to you
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
jazz995756 said:
Its still at Samsung they charge me $170 cuz I got a suggestion to flash overcome and I bricked it so I just bought a different one
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
jazz995756 said:
You need to restore via Odin first download Odin then head over to this link
http://allkindfile.blogspot.com/2012/07/odin-flasher-and-original-ops-pit-file.html?m=1 scroll down to the bottom and find the Samsung galaxy tab pit for the gt-p1000 after that go to this link http://www.sammobile.com/firmwares/ and search your tablet in the search box and it should say Germany on it download that file. Boit into download mode i believe its voljme down + power. Open Odin and click pit and open the pit file you downloaded. Then click PDA and find the firmware you got from the last link. Then just hit start and you should be good to go
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
please can i have the link to the pit file, the link is hosted on hotfile which is now down.

You may want to use the Overcome Method: http://forum.xda-developers.com/showthread.php?t=1881981
Sent from my GT-P1000 using XDA Premium 4 mobile app

tunjicool said:
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
after years with this tab, i decide to upgrade to ics so i can have bbm installed.
i flashed (root) the device with odin and now i am stuck in boot-loop.
please, where do i start?
---------- Post added at 11:33 PM ---------- Previous post was at 11:29 PM ----------
please can i have the link to the pit file, the link is hosted on hotfile which is now down.
Click to expand...
Click to collapse
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).

xz124 said:
Ensure that you flashed a correct ROM for your tablet model, and that you cleared data when you flashed (from recovery).
Click to expand...
Click to collapse
thank you for this reply. though it came a bit late.
the device is dead!!!
if i on it now, it will only on the camera flash light as long as i hold the power button and then off the light when i release the button.
i don't know what to do.
i guess i can still get help on reviving it somehow or else i should start planning the burial .