[ROM][KERNEL][RECOVERY][JB4.2]Infamous AOKP 1.9.1 (12-Jul) && Kernel 2.4 (7-Aug)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on our existing work, we (djmatt604 & kasper_h) have joined forces to bring you the AOKP experience Infamous-style!
This ROM is based on the AOKP jellybean 4.2 sources
To this we added:
-The pershoot device & vendor trees, adapted to our needs
-Our own kernel (based on pershoot's p4 kernel with a large range of additions)
-Some CM/AOKP cherries
-A unique set of homemade patches
Changelog version 1.9.1
-AOKP source code 11-Jul-2013 (including the patch solving the masterkey security flaw in android)
-Kernel 2.2 (see below for details)
Changelog version 1.9.0
-AOKP source code 30-Jun-2013
-Kernel 2.1:
> Updated WiFi driver
> Solution to l2_hsic issue
> Fix for p4 LTE modem
> Update to BFQ
> All these are upstream fixes of pershoot!
-Updated wifi vendor blobs
-Fixes some coding issues with some patches to make things more stable
-Gapps are no longer included, you can flash the gapps package (see download links below)
-Gapps need to be installed for every ROM - no automatic backup/restore
Changelog version 1.8.0
-AOKP source code 26-May-2013
-Kernel 1.7: Revert the wifi-driver patches from kernel & device-tree
-Enabled frandom in device tree
-Solved some problems in Tablet mode with touch screen sensitivity
-Allow custom density & allow changing sys-bar font size
-Allow sys-bar hiding
-Some small under-the-hood improvements
Changelog version 1.7
-AOKP source code 28-Apr-2013
-Many upstream improvements (Ribbon, PermissionManager to name a few)
-Some cherries (see our github for details)
-Some updated gapps
-Kernel version 1.4 (Improved wifi driver thanks to pershoot)
>>This ROM can only be used with this kernel, other custom kernel may cause issues with WiFi!
Changelog version 1.4
-AOKP source code 13-Apr-2013
-Kernel version 1.3 (Added GPU OC)
-Updated gapps (new google play & calendarsync)
Changelog version 1.3
-Added p4vzw/p4tmo to build target
-AOKP source code 06-Apr-2013
Changelog version 1.2
-AOKP source code 04-Apr-2013
-Kernel version 1.2 (see github for details)
-Added the option to add date to systembar clock
-Some small under-the-hood stuff
-Patches added to make CIFS work (I hope, fingers crossed)
All our source code can be found on github:
https://github.com/InfamousAOKP
Installation instructions:
-Reboot to recovery (CWM or TWRP)
-Make a backup of your current ROM
-Wipe system
-Factory reset
-Flash the zip
-Flash a gapps package
-Reboot and enjoy!
Disclaimer:
General disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!
Specific disclaimer for p4
Code:
#include
/*
* Your warranty is now void.
*
* Both developers involved in this work own a p4wifi/p7510 device. The ROM
* build for p4/p4vzw is based on the same code, using the CyanogenMod device
* tree for p4/p4vzw. Although this should work perfectly fine, we have not tested this
* ROM ourselves on p4/p4vzw. Only use this ROM on p4/p4vzw if you know how to recover
* from a bad flash!
*/
By using the rom you agree with the above terms!
Credits:
-AOKP team
-CyanogenMod team
-pershoot
-rootaxbox & xdafileserver for their download servers
Kernel 2.4
-Upstream updates from pershoot to fix screen flickering
Kernel 2.3
For details:
https://github.com/InfamousAOKP/android_kernel_samsung_p4
Separate download that can be flashed on top of Infamous 1.9/1.9.1, from the download link below.
Recovery
A modded version of TWRP is available. This is based on the latest TWRP source (2.5.0.0 + patches for 2.6 -> 2.6beta). We added a custom boot splash and themed it holo. It can be downloaded from the TWRP folder in the download links below.
Three options to install:
-zip: can be flashed in any recovery you are currently running
-.tar.md5: can be flashed using both Mobile Odin and regular Odin, after renaming to recovery.tar.md5
-.img: copy to sdcard root and rename to recovery.img and use raw writing from terminal (dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p2)
Errors have been reported with flashing using Odin. Our advice is therefore to flash the zip from CWM or an older TWRP recovery.
Downloads:
p4
http://rootaxbox.no-ip.org/kasper_h/roms/p4/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4
p4wifi
http://rootaxbox.no-ip.org/kasper_h/roms/p4wifi/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4wifi
p4vzw
http://rootaxbox.no-ip.org/kasper_h/roms/p4vzw/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4vzw
p4tmo
http://rootaxbox.no-ip.org/kasper_h/roms/p4tmo/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/p4tmo
gapps
http://rootaxbox.no-ip.org/kasper_h/roms/gapps/
http://www.xdafileserver.nl/index.php?dir=Samsung/Galaxy+S/MackayROM/gapps
Reserved the second post for more info later
Looks good.. Have any screenshots?
kilometers4 said:
Looks good.. Have any screenshots?
Click to expand...
Click to collapse
Like all JB4.2 ROMs. The ROM has not been themed in any way, but can easily be themed by the user (e.g. choice between phone, phablet, tablet UI, themes etc.).
Right on brother! Welcome aboard! This is gonna be special.
Welcome to the team bro! Now this is what I am talking about!! Might even let my wife take over my N8013 and take her 7510.
Just flashed your recovery with Mobile Odin and now I am stuck on the Samsung Screen. I will try to re-flash it with Odin or go back to CWM if that doesn't work.
Dreameagl said:
Just flashed your recovery with Mobile Odin and now I am stuck on the Samsung Screen. I will try to re-flash it with Odin or go back to CWM if that doesn't work.
Click to expand...
Click to collapse
A flash with Desktop Odin should do the job. I personally only use Desktop Odin...never bought into the mobile one, no offense to the godlike dev responsible for it
Sent from my Infamous Tab.
Sweet
---------- Post added at 09:24 AM ---------- Previous post was at 08:34 AM ----------
jittusm said:
Sweet
Click to expand...
Click to collapse
I guess only a cache and dalvik wipe is sufficient if i am coming from ur previous aokp build right?
That should be all if coming from that previous build, yes. However, there are some other patches and chunks that were not previously part of the base build - back up your apps first in case you do run into any issues, and do a clean flash if something does happen.
jittusm said:
Sweet
---------- Post added at 09:24 AM ---------- Previous post was at 08:34 AM ----------
I guess only a cache and dalvik wipe is sufficient if i am coming from ur previous aokp build right?
Click to expand...
Click to collapse
I always do flashes without wipes. Already did eight in the last days during
testing. Did not wipe anything.
Dreameagl said:
Just flashed your recovery with Mobile Odin and now I am stuck on the Samsung Screen. I will try to re-flash it with Odin or go back to CWM if that doesn't work.
Click to expand...
Click to collapse
Did you take the correct version for your device? I actually used mobile Odin myself before and it works fine. But I actually think flashing in recovery of the zip file is easiest...
Verstuurd van mijn GT-I9000
Finally we have Infamous AOKP on our p4! Thanks a lot kasper
Could you please add your TWRP link to first post or give me link for the p4 one?
soroush0313 said:
Finally we have Infamous AOKP on our p4! Thanks a lot kasper
Could you please add your TWRP link to first post or give me link for the p4 one?
Click to expand...
Click to collapse
If you go to xdafileserver or rootaxbox (download link ROM in OP) you can find a folder twrp. Easiest is to download the zip and flash this in your current recovery.
Verstuurd van mijn GT-I9000
kasper_h said:
I always do flashes without wipes. Already did eight in the last days during
testing. Did not wipe anything.
Did you take the correct version for your device? I actually used mobile Odin myself before and it works fine. But I actually think flashing in recovery of the zip file is easiest...
Verstuurd van mijn GT-I9000
Click to expand...
Click to collapse
I used the P4wifi for my wifi device. There might be an issue with the file as Odin says the md5 hash value is invalid.
Dreameagl said:
I used the P4wifi for my wifi device. There might be an issue with the file as Odin says the md5 hash value is invalid.
Click to expand...
Click to collapse
Did you also try the zip file? A wrong md5 hash seems to point at a faulty download. That is the advantage of the .tar.md5 file, that it checks the file before flashing it.
Verstuurd van mijn GT-I9000
I tried the zip file but I got an error installing it and the installation quit. I actually had to go back to a cwm 4.0.0.4. When I tried to install the zip file this time it worked???
I didn't change anything on the file. I previously had cwm 6.0.3.0. Not sure if that had a bad install or what.
Well now everything seems to be working ok.
Thanks again for this! Running awesome....just in case I'm blind, there is not an option to change the lockscreen image right?
Sent from my GT-P7500 using xda app-developers app
Dreameagl said:
I tried the zip file but I got an error installing it and the installation quit. I actually had to go back to a cwm 4.0.0.4. When I tried to install the zip file this time it worked???
I didn't change anything on the file. I previously had cwm 6.0.3.0. Not sure if that had a bad install or what.
Well now everything seems to be working ok.
Click to expand...
Click to collapse
First time I tried installing I was using TWRP 4.2.1 and it would fail every time but using CWM I had zero issues. I haven't tried with TWRP 4.2.2. So I think the issue was with the older TWRP
Is there something wrong with the ROM. It seems that when I play any video the volume seems super soft. Loving the rom BTW. Its just this issue I'm having.
Sent from my GT-P7500 using XDA Premium HD app
I want to thank you so much for bringing AOKP to the Tab. I've had AOKP (Euroskank's AOSKP) on my Galaxy Nexus for a long time and love it.
I'd been using CM10.1 on my Tab and felt like I'd been in chains for the longest time. Now that I have AOKP it's like the handcuffs have been removed.
Thanks!
Is there a Goo.im page to look for updates?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
CPA-Poke
Cdub50
Code:
Linaro 4.9 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="http://pastebin.com/WNTJMS6k"]LiquidSmooth v3.0 Full list of features[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
Code:
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Xperia%20Z%20Tablet%20GSM/"]Pollux Download[/URL]
[url="http://www.drdevs.com/devs/teamliquid/Nightly/Xperia%20Z%20Tablet%20Wifi/"]Pollux_Windy Download [/URL]
[url="http://www.drdevs.com/devs/teamliquid/Gapps/"]Slim AIO Gapps Download[/URL]
Please Support Liquid by Donating HERE
XDA:DevDB Information
[ROM] [4.4.2] [OFFICIAL] LiquidSmooth v3.0 Beta, a ROM for the Sony Xperia Tablet Z
Contributors
deadman96385
Version Information
Status: Testing
Created 2014-03-06
Last Updated 2014-03-09
This is a stable beta build for the Xperia Tablet Z.
Bugs:
No confirmation that Theme has been applied, requires reboot to see the theme
Pie needs a reboot to show up
Click to expand...
Click to collapse
Xperia Tablet Z specific bugs:
Boot Animation is not sized properly
Click to expand...
Click to collapse
Mine just in case
Hey deadman96385,
will try ur pollux_windy build tomorrow.
my build wont install through TWRecovery ... today i did a fresh build ... again installation aborted.
i ftf flashed back to stock to get rid of my fotakernel TWRecovery and tried to install my build through
cwm ... installation was ok but it wont boot.
so lets see if ur build is usable.
btw i can test the whole stuff for u and sen u some logs and error reports ef u like!
Greetings and thanks for ur help in the last days!
c0llal0 said:
Hey deadman96385,
will try ur pollux_windy build tomorrow.
my build wont install through TWRecovery ... today i did a fresh build ... again installation aborted.
i ftf flashed back to stock to get rid of my fotakernel TWRecovery and tried to install my build through
cwm ... installation was ok but it wont boot.
so lets see if ur build is usable.
btw i can test the whole stuff for u and sen u some logs and error reports ef u like!
Greetings and thanks for ur help in the last days!
Click to expand...
Click to collapse
There our three methods (That may work) to try if it does not want to flash in twrp they our
1. Unmount system then flash
2. Factory Reset, reboot to recovery again then flash
3. Flash CWM and in this case try flashing a alt kernel
Edit: Windy is up
deadman96385 said:
There our three methods (That may work) to try if it does not want to flash in twrp they our
1. Unmount system then flash
2. Factory Reset, reboot to recovery again then flash
3. Flash CWM and in this case try flashing a alt kernel
Edit: Windy is up
Click to expand...
Click to collapse
Seen ... downloaded and tested ...
same bug with ur build ... i get bootloops ... it wont come pass sony logo.
can anybody confirm this or is something different broken over here???
need some sleep now
c0llal0 said:
Seen ... downloaded and tested ...
same bug with ur build ... i get bootloops ... it wont come pass sony logo.
can anybody confirm this or is something different broken over here???
need some sleep now
Click to expand...
Click to collapse
You sure none of those methods worked?
Need to try third method.
I need some sleep first got to be at work in about 7 hours.
But first and second method left me behind with the same bugs i had with my build.
Sent from my C6603 using XDA Premium 4 mobile app
I give up for now ... no chance to mek it boot over here!
maybe the fault sits in front of the tablet, don't know ...
anybody else tested to install liquidsmooth???
any feedback for deadman??? come on ...
Edit:
Going back to stock rom and try to flash again.
It must be something wrong over here, i even can't
get omni to install.
Im following u guyz on G+ nice
So cool to see liquidsmooth spreading all over xperia models...i luv this rom on Yuga and will give a shot a bit later on tonite with my polluxwindy.
So cool thank u sir!
Whenever u need testerz pm me.
Tapatalked with my Yuga
c0llal0 said:
I give up for now ... no chance to mek it boot over here!
maybe the fault sits in front of the tablet, don't know ...
anybody else tested to install liquidsmooth???
any feedback for deadman??? come on ...
Edit:
Going back to stock rom and try to flash again.
It must be something wrong over here, i even can't
get omni to install.
Click to expand...
Click to collapse
Installed with no problem using TWRP 2.6.3.0 :good:
Backed up using TWRP (Was running PAC ROM android 4.3)
Factory wipe, + wipe Dalvik & cache to be sure.
Flashed LiquidSmooth
Wipe Dalvik & cache again - just incase
Reboot - no problem - running LiquidSmooth
I'm now going to flash the provided Slim Gapps zip. Will report back if there's a problem
Testing beta
I will flash this rom also once i'm off work. Thanks for bringing this to the tab Z!
I am curious about this rom. Does it have double tap to wake?
Not yet or i didnt see where to activate it...but double tap status bar to sleep yes :angel:
SplitView aka multiwindow is working perfect...only Pie; i had to reboot to get it work.
And getting some fc's here and there...will bring back logcats tomorrow
GretaLewd said:
Installed with no problem using TWRP 2.6.3.0 :good:
Backed up using TWRP (Was running PAC ROM android 4.3)
Factory wipe, + wipe Dalvik & cache to be sure.
Flashed LiquidSmooth
Wipe Dalvik & cache again - just incase
Reboot - no problem - running LiquidSmooth
I'm now going to flash the provided Slim Gapps zip. Will report back if there's a problem
Click to expand...
Click to collapse
Thanks for that, but i know how To .... Important for me is the information that it works because for me it always ends up in bootloops ... wether lsrom or omni ....
I got some serious trouble over here. Need to flash some older stock Rom than 4.3 and try again. God damn it
Sent from my C6603 using XDA Premium 4 mobile app
Is tape2wake feature implemented?
lupick said:
Is tape2wake feature implemented?
Click to expand...
Click to collapse
How about looking 2 posts before?
So far this ROM is working excellent on Pollux in Dalvik.
Been using for two days for a total of around 24 hours and not had a single major problem. Very impressed its the slickest ROM I have used yet on 4.4.
I was using cm11 fidelity, then got a random reboot halfway through a game and got stuck in bootloop so thought I'd give this a try.
For anyone having issues, I had flashed cm11 fidelity inc mods then booted into CWM, didn't reflash kernel from laptop (no access at minute) just factory reset and wiped cache and dalvik cache.
Not major but once orr twice on MX player had the common sound bug, where the sound seems to stall for half a second, didn't have this on fidelity but had it on every other 4.4 ROM. One other issue is if you get a notification with headphones in, it still plays through loudspeakers too.
Very well done with this ROM guys thank you.
I dirty flashed it and i dont know why people says to modify first post i got it first try and apparently im not the one...
Well, someone else having trouble to mount SD?
I tried then a clean install and same thing, and also tried it with omni kernel...same thing, also no sd access from rom.
Tapatalked with my Yuga
Could someone please test this new boot animation it is sized for this tablet, it is not flashable you will need to manually replace it, rename the 2560.zip to bootanimation.zip
Download Link: https://www.dropbox.com/sh/1h0mp8ekusdz1b9/5VRu5mD9VN/2560.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
cameron581
cdub50
Cl3Kener
CPA-Poke
deadman96385
iiD4x
itsmikeramsay
Jarrid42
johnnyslt
jsnweitzel
liquid0624
mtb300gt
Ntemis
reginald476
rkpeterson
rwaempires
sandtod
Somber73
sspencer10ls
TheBr0ken
timpohladthomas
Code:
SaberMod 4.7 GCC Toolchain for Rom
SaberMod 4.10 GCC Toolchain for Kernel
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Code Aurora Optimaztions
Display CAF
Dynamic Color Changer
Slims DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slims QuickSettings
Halo (Renamed to bubble in settings)
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working wifi Tethering
Cell Broadcasts
Slims Configurable Power Menu
Slims Configurable Nav Bar
Custom animation controls (Listview)
LockScreen Notifications
And way more than this...
Code:
[url="https://plus.google.com/b/102153960718796996774/communities/117452480298315341829/stream/d5e8c0fe-5ee7-44df-97a5-6dd8cdcf8bb8"]Check our Google+ for a updates[/URL]
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[URL="https://github.com/LiquidSmooth-Devices/kernel_lge_msm8974"]Kernel Source[/URL]
Code:
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_ATT/"]D800 (ATT) Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608654"]D800 (ATT) Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_TMobile/"]D801 (T-Mobile) Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608657"]D801 (T-Mobile) Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_d802/"]D802 Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608285"]D802 Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_d803/"]D803 Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608661"]D803 Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_Sprint/"]LS980 (Sprint) Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608663"]LS980 (Sprint) Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Milestone/LG_G2_Verizon/"]VS980 (Verizon) Milestone Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608666"]VS980 (Verizon) Mirror[/URL]
[url="http://drdevs.com/devs/teamliquid/Gapps/"]Liquid Gapps Download[/URL]
[url="https://www.androidfilehost.com/?fid=95784891001608668"]Liquid Gapps 8.1 Mirror[/URL]
LG G2 (All Variants) specific bugs:
Code:
if knock on/dt2w is not working. please run this in android terminal emulator:
echo "1" > /sys/devices/virtual/input/lge_touch/firmware (then press enter)
Thanks @savoca for pointing this out
Install Instructions:
Code:
- Make sure you're running latest Recovery (I personally use TWRP)
- Copy GApps and Liquid ZIP to your internal SDCard
- Boot into Recovery
- Wipe Data / Factory Reset
- Wipe Cache & Dalvik Cache
- Flash Liquid zip from internal SDCard
- Flash GApps zip from internal SDCard
- Reboot
- Restoring Apps + Data might cause problems and is not recommended
Have questions or want answers? Head to the Q&A Thread:
Code:
[URL="http://forum.xda-developers.com/lg-g2/help/question-answer-liquid-smooth-rom-t2873537"][CENTER]LG-G2 LiquidSmooth Q&A Thread[/CENTER][/URL]
CLICK HERE TO SHOW LIQUIDSMOOTH SOME LOVE
[ROM][4.4.4][OFFICIAL][D800/801/802/803/LSVS980] LiquidSmooth [9/1]
The original OP
Official Builds of LiquidSmooth
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid Members:
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
Cdub50
Features:
Code:
Linaro 4.8 GCC Toolchain
O3 Strict-Aliasing & ISO C++11 Mode
ARM Optimized String Handling Routines
Linaro and Code Aurora Optimaztions
SaberMod 4.7 Toolchain for the kernel
Slim's DPI on the fly
Custom animation controls
TRDS 3.0 (Liquid Blackout in settings)
Active Display
Slim's QuickSettings
Ram Bar
T-Mobile Theme Engine
Privacy Guard
Built in SuperUser
Working WiFi Tethering
Cell Broadcasts
Slim's Configurable Power Menu
Slim's Configurable Nav Bar
Slim's Recents
Custom animation controls (Listview)
LockScreen Notifications
LiquidOTA
And way more than this...
Build Change Log:
Code:
**9/1**
Initial posting
Source Code:
Code:
[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
[url="https://github.com/IllusionRom/android_kernel_lge_msm8974"]IllusionROM's Kernel[/URL]
Downloads:
Code:
[url=" "]D803 ROM Download[/URL]
[url=" http://forum.xda-developers.com/showthread.php?t=2012857 "]BaNkS GApps Download[/URL]
Screenshots:
Please Support Liquid by Donating HERE
Know Issues - please do not post about bugs that you see on this list:
- Font Size picker does not work
- LCD Density force closes settings once you change the density and click the home or back buttons.
- Slim Pie needs a reboot before the trigger areas work
- There is no way to disable Nav bar and pie currently
- OTA App is still in the testing phase, so it will be buggy so do not use it.
If you see something not in this list, let me know below. :cyclops:
New Features:
Custom Progress Bar.
LG apps known to work:
RieGo's LG QuickRemote v8
My personal settings:
System DPI at 360
Navigation Height at 36
Action Launcher Pro
Kernel settings:
TCP Congestion Control: reno
I/O Scheduler: zen
CPU Governor: ondemand
CPU Max Frequency: 2265600
GPU Max Frequency: 320 MHz
Please note, I do not have this device, so let me know if you have issues or things don't seem right as I can't test this exact build.
Will test and report back
Sent from my g2 using Tapatalk
theghazi said:
Will test and report back
Sent from my g2 using Tapatalk
Click to expand...
Click to collapse
The link is live now, I was waiting for the upload to finish.
Edit: did it boot? I am very interested to hear feedback on this build!
Will test and report after
---------- Post added at 01:47 PM ---------- Previous post was at 01:30 PM ----------
OK so while flashing encountered some errors. TWRP 2.6.3.4 gives FAILED and philz gives a status 7 error. I ignored them and booted and the os was installed. Another thing is that there is no camera app. It is in system but it doesn't show up in drawer or anywhere. Thanks for the rom!
[email protected] said:
Will test and report after
---------- Post added at 01:47 PM ---------- Previous post was at 01:30 PM ----------
OK so while flashing encountered some errors. TWRP 2.6.3.4 gives FAILED and philz gives a status 7 error. I ignored them and booted and the os was installed. Another thing is that there is no camera app. It is in system but it doesn't show up in drawer or anywhere. Thanks for the rom!
Click to expand...
Click to collapse
Thank you for the feedback, I use TWRP and there has been an issue where if you wipe system TWRP has an issue formating it while it is mounted so if you manually unmount /system that should take care of it. I would guess the missing camera could be an issue with the flash.
Reginald476 said:
Thank you for the feedback, I use TWRP and there has been an issue where if you wipe system TWRP has an issue formating it while it is mounted so if you manually unmount /system that should take care of it. I would guess the missing camera could be an issue with the flash.
Click to expand...
Click to collapse
Checked in the mounts and system wasn't mounted. Ticked and unticked and it still had the same issue after flashing. I'll post here the flash log when I get home in a couple of hours
Alright, I have an updated build using IllusionRom's kernel and the SaberMod 4.7 Toolchain. This, to me, has been the fastest and most stable my G2 has run, I have had this tested on every G2 variant and so far it seems to be stable and run well. If you are feeling up to it please try the OTA, if not I will post links a bit later tonight.
Please feel free to give me feedback on the OTA experience and how the kernel works for you.
Changelog is in the OTA, to manually update go to Settings > About Phone > LiquidSmooth Updates if it does not show 3.0-20140331 use the menu to Refresh.
Thanks for checking out my build and I hope it works as well for you as it has been working for me!
I was hopping roms the last few days because of the call echo. Is that fixed in d802? I really need my daily Dosis of liquid.
Edit : nvm, looks like i can't tell the difference between d802&d803
Gesendet von meinem LG-D802 mit Tapatalk
ckyy said:
I was hopping roms the last few days because of the call echo. Is that fixed in d802? I really need my daily Dosis of liquid.
Edit : nvm, looks like i can't tell the difference between d802&d803
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
It is fixed on all of my builds. Here is the thread for the d802: http://forum.xda-developers.com/showthread.php?t=2656704 :cyclops:
Reginald476 said:
It is fixed on all of my builds. Here is the thread for the d802: http://forum.xda-developers.com/showthread.php?t=2656704 :cyclops:
Click to expand...
Click to collapse
Any d801 love?
Sent from my LG-D801 using Tapatalk
bouzouki said:
Any d801 love?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I have one for each variant. :victory:
d801: http://forum.xda-developers.com/showthread.php?t=2656692
I know all I've been doing is posting bugs but I have to report my findings haha
When I go to Liquid OTA it says
"Unsupported Rom: The ROM developer has not enabled support for the OTA Updater! Please ask them (Kindly) to add support before using this app!
(otaupdater.otaid value empty or missing)"
I press "Ignore" and head to where the OTA should be. Pressed refresh a couple of times and it didnt show anything.
Thanks for showing interest in one of the variants that has gotten the least support compared to other variants. This looks promising!
[email protected] said:
I know all I've been doing is posting bugs but I have to report my findings haha
When I go to Liquid OTA it says
"Unsupported Rom: The ROM developer has not enabled support for the OTA Updater! Please ask them (Kindly) to add support before using this app!
(otaupdater.otaid value empty or missing)"
I press "Ignore" and head to where the OTA should be. Pressed refresh a couple of times and it didnt show anything.
Thanks for showing interest in one of the variants that has gotten the least support compared to other variants. This looks promising!
Click to expand...
Click to collapse
I must have screwed something up when I added it to the OTA.
No problem, I am just glad you are responding and giving feedback.
Edit: OTA should be fixed in the next build. The OP link has been updated.
Reginald476 said:
I must have screwed something up when I added it to the OTA.
No problem, I am just glad you are responding and giving feedback.
Edit: OTA should be fixed in the next build. The OP link has been updated.
Click to expand...
Click to collapse
Hm, I'd like to know what have been the results for other users. I flashed the latest 31/3 one and got the same failed, flashed gapps after, booted, same camera issue and when I went to the OTA updater it gave the same "device not supported" message. Apart from that, the rom is completely fine.
I took the d802 version, changed the updater-script and flashed Furnace 1.8.1 on top of it, and so far so good, no issues on the d803. Loving the work you've done on it, will use that one from now on
[email protected] said:
Hm, I'd like to know what have been the results for other users. I flashed the latest 31/3 one and got the same failed, flashed gapps after, booted, same camera issue and when I went to the OTA updater it gave the same "device not supported" message. Apart from that, the rom is completely fine.
I took the d802 version, changed the updater-script and flashed Furnace 1.8.1 on top of it, and so far so good, no issues on the d803. Loving the work you've done on it, will use that one from now on
Click to expand...
Click to collapse
Sorry, I meant the build after 31/3 will have a working OTA. If really like to hear from others as well. ~30 people have downloaded it so someone other than you should have installed it by now.
I will look at the build.prop and configs to make sure something wasn't missed in the bring up.
Sent from my LG-VS980 using Tapatalk
Reginald476 said:
Sorry, I meant the build after 31/3 will have a working OTA. If really like to hear from others as well. ~30 people have downloaded it so someone other than you should have installed it by now.
I will look at the build.prop and configs to make sure something wasn't missed in the bring up.
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
Oh my, missed that one haha
Hopefully some other users report soon!
Any reason Skype notifications would not be coming through on vs980?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great Devs have been working hard for our little device. Hats off to them.
This thread aims to reduce flooding of queries not related to development in dev threads
so as not to hamper their work.
And hopefully not to flood other devices' forums as well.
Let's discuss here, provide logcats if necessary and report bugs to help the developers.
CyanogenMod 11.0 is a free, community built, aftermarket firmware distribution of Android 4.4.4 KK(),
which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions
from many people within the Android community. It can be used without any need to have
any Google application installed. Linked below is a package that has come from another
Android project that restore the Google parts. CyanogenMod does still include various
hardware-specific code, which is also slowly being open-sourced anyway.
From CM11 Dev thread.
Current issues (06/10/2014)
OMX codecs (for accelerated audio/video - may never be solved)
SIM unlock doesn't work (you must remove your SIM lock in another device/ROM)
Video recorder
First-time installation:
Read first posts of DEV Thread:
1.http://forum.xda-developers.com/showthread.php?t=2766229
ClockworkMod v6 is mandatory to install CM11.
Download the latest full OTA build for cooperve from:
RC9: http://download.androidarmv6.org/_builds/cooperve/stable/
Nightlies: http://download.androidarmv6.org/_builds/cooperve/
Quote of dev: psyke83
"IMPORTANT!!! mandatory recovery
update required for cm11 builds later
than 23/07/2014
IMPORTANT!!!
As of 23/07/2014, all CM11 builds for the
bcm21553 series will be switched over to
the MTD flash drivers. In order for these
packages to work correctly, you must first
flash an MTD-compatible recovery (CWM
v6.0.5.2 or later only).
Don't flash the updated recovery until a)
you've backed up your data, b) the CM11
23/07/2014 build (or later) is available,
and c) you're ready to switch to the MTD
build.
How to update to MTD build:
Download an MTD-compatible recovery
(linked below) and a full CM11 OTA build
dated 23/07/2014 (or later).
Perform a full backup using the old
recovery (mandatory!)
Flash the updated recovery, and reboot
into the new recovery.
In the new MTD recovery, perform a data-
wipe, and manually format /system (this
step is critical in order for your partitions
to be properly converted to the mtd/
yaffs2 format - don't ignore it!)
Flash the CM11 package.
Once you've data-wiped and flashed the
initial MTD build, future CM11 updates
can be installed normally (delta or full
packages, as you desire).
Notes:
Older ROMs will no longer be compatible
with the MTD recovery and yaffs2-
formatted partitions. If you wish to use a
stock/modded Gingerbread ROM, CM7 or
CM9, you should wait until MTD versions
of these ROMs become available.
If you want to go back to a non-MTD
ROM, you must flash an entire stock ROM
(CSC+MODEM+PDA) via Odin, or else
your partitions will be stuck in MTD
format."
###_________________
MTD-COMPATIBLE RECOVERY @Post #308 by lesikvip
###_________________
Some Screens:
Full Screenshots: http://forum.xda-developers.com/showthread.php?p=54014189
Gapps link: http://madteam.co/forum/index.php?topic=6285.0
How to update (via OTA):
Please consult the cm-ota instructions on Jenkins.
Summary of major work done:
Forked broadcomCM devices into androidarmv6 repository (forked from ics branches).
Initial changes needed for cm-11.0 have been committed to cooperve, tassve, totoro and bcm21553-common device trees.
All of Broadcom's code has been adapted for the cm-11.0 branch.
After some reverse engineering of the vendor binaries, "adbd" and "init" built from source now work correctly.
ADB will now set the proper USB mode, can give a root shell, and no longer has a hardcoded dependency on /system/bin/sh,
which should help a great deal with debugging. We also no longer need to use the init prebuilt binary - the source-built version
is now compatible.
Implemented common kernel source for totoro, cooperve and tassve.
Implemented hybrid boot/recovery/charge ramdisk.
Fixed WiFi, Bluetooth, Bluetooth tether & mac addresses.
Fixed graphical performance regression on CM11 branch.
Fixed basic audio (speaker, microphone, software encoders/decoders)
Fixed GPS.
Fixed Gallery, wallpaper chooser, live wallpapers, RenderScript, and possible EGL crashes in other apps
Added workaround for SystemUI corruption
Fixed graphical corruption/stability issues (caused by buggy GL_EXT_discard_framebuffer extension)
Fixed RIL, telephony and audio routing to speakers, headset, earpiece, microphone and microphone mute.
* = this code is work in progress, meaning that it won't be available in OTA builds.
IMPORTANT NOTICES from the dev:
psyke83 said:
OK, I managed to fix routing and volume control while in-call. I've merged the changes and started OTA builds for the three devices, so that you can have a build with working telephony. Enjoy!
To see the build status (to know when they will be available from the updater):
totoro: http://jenkins.androidarmv6.org/job/cm-ota/390
tassve: http://jenkins.androidarmv6.org/job/cm-ota/391
cooperve: http://jenkins.androidarmv6.org/job/cm-ota/392
If telephony doesn't work in the tassve or cooperve builds, try updating to the latest baseband. If that still doesn't work, please send me a radio log:
Code:
adb shell logcat -b radio >radio.log
Click to expand...
Click to collapse
psyke83 said:
Folks,
If you're using Link2SD, Mounts2SD, or want a functional app2sd method, keep reading.
These applications are (IMHO) a little too intrusive to be used on my ROM. The main reason is that the apps install their respective mount scripts in a non-optimal location (/system), which can cause problems when you perform ROM upgrades. Link2SD is particularly egregious, because it overwrites a core system file with its script (/system/bin/debuggerd, which is needed by a system service), and this breaks delta updates.
In the past (for CM7), I always favoured S2E on my devices due to it being a much cleaner app2sd implementation, but it had some problems with corruption due to some (IMHO) unnecessary filesystem tweaks. Additionally, S2E doesn't yet support KitKat/CM11. With these issues in mind, I decided to release a fork of the application (called simple2ext_mod), which is focused on maximizing stability and providing support for CM11 ROMs.
I would strongly suggest that you give this app a try. If you're already using Mount2SD or Link2SD, you'll probably have some problems (as they will leave their mount scripts behind). So, it might be a good idea to do a data-wipe beforehand.
Here's the release thread: http://forum.xda-developers.com/android/apps-games/app-simple2extmod-cyanogenmod-11-t2840295
Click to expand...
Click to collapse
Im pretty sure everybody will use the cm7 and cm9 discussion thread for cm11 too.
Someone tried to install some gapps. Official gapps for cm (small version) can't install. Status 7 (with cwm 6).Banks gapps install ok but always fc's
Enviado desde mi GT-I9300 mediante Tapatalk
Hi, does CM11 required EXT4 file sistem and (or) CM7? I tried to install this on stock rom it's says E:Can't mount /data. Thanks!
Sent from my GT-S5830i using Tapatalk 2
yusrilramadhan said:
Hi, does CM11 required EXT4 file sistem and (or) CM7? I tried to install this on stock rom it's says E:Can't mount /data. Thanks!
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
You need EXT4 flash it on CM 7.
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
luilly said:
Someone tried to install some gapps
Click to expand...
Click to collapse
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
lesikvip said:
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
Click to expand...
Click to collapse
Wait, did you insert the SIM Card too? Cause it's only show blackscreen when using SIM Card
Sent from my GT-S5830i using Tapatalk 2
Just wanted to thank the developers for great the work.
I have closed my thread for discussion for cm7/cm9/cm10 so this is the new thread for future.
So best of luck to OP for good maintainence of discussion thread.
cooperve/cm-11-20140707-NIGHTLY-cooperve.zip
does this fix the sim card issue for cooperve?
yusrilramadhan said:
Wait, did you insert the SIM Card too? Cause it's only show blackscreen when using SIM Card
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
No, when you run the sim black screen ..
But the problem with crash on startup with sim solved! Firmware modem part S5360_XXMK1, through Odin.
Addressing 4pda. ru/forum /index.php? showtopic= 585296&view =findpost&p =32722332
Links can not place restrictions on the forum (10 posts)
lesikvip said:
I have no problem with the stock firmware ask. Also there was an error Error mount / system, but I ignored her and flashed CM11 successfully!)
I tried, but all in vain. Flashing by cwm, installs successfully, the phone appears at startup window "Updating Applications", but when the system is running ... no gapps Separately, through the APK file, installs gallery, play store, sync and something else. Play market behaves erratically, often crash.
smbe.
Click to expand...
Click to collapse
Thanks. We Have to Wait for a nightly which could install gapps. Thanka for this hard word guys.
Enviado desde mi GT-I9300 mediante Tapatalk
Screenshots CM11 [GT-S5830i]
Updating...
Can i put these on first post?
Thanks
patrol31 said:
Can i put these on first post?
Thanks
Click to expand...
Click to collapse
Yes, you can! @patrol31
luilly said:
Thanks. We Have to Wait for a nightly which could install gapps. Thanka for this hard word guys.
Enviado desde mi GT-I9300 mediante Tapatalk
Click to expand...
Click to collapse
Ggaps up from the usual 5830, here is the link 4pda.ru/forum/index.php?showtopic=531172&view=findpost&p=28339926. I advise you to remove setupwizard.apk, to avoid mistakes when you first start.
Cm 11 is a bit slow but in airplane mode it is fast
in notification bar it shows no internet connection and emergency calls ( blinking)
I think that is why the phone is slow
lesikvip said:
Ggaps up from the usual 5830, here is the link 4pda. ru / forum / index.php? showtopic = 531172 & view = findpost & p = 28339926. I advise you to remove setupwizard.apk, to avoid mistakes when you first start.
Original 4pda. ru/forum/index.php? showtopic=585296& view=findpost&p=32708265
Click to expand...
Click to collapse
Thanks but Error 404 in anyone link inside. Please, can you upload the gapps?
Gapps link now provided on the first post.
luilly said:
Thanks but Error 404 in anyone link inside. Please, can you upload the gapps?
Click to expand...
Click to collapse
Posted a link to a personal, if you have the opportunity to lay out in the subject as an alternative. Because I have been to most gapps problem.
Code:
#include
/*
* Your warranty is now void.
* This is [B]NOT[/B] CyanogenOS (Stock ROM), This is CyanogenMod ROM (CM-11.0)
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research if
* you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I build this ROM using CM11.0 source for tomato aka YU Yureka.
I am not the developer of this ROM. I just build this ROM.
This ROM does not have gapps (Google Play Strore & other google goodies). But you can download & install it from http://wiki.cyanogenmod.org/w/Google_Apps
Prerequists: YU should be on stock rom.
Please don't just leech the files and go away. You can easily say thanks just by pressing "Thanks" button.
Download:
ROM: cm-11-20150325-UNOFFICIAL-tomato.zip - 227.45 MB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MD5Sum: cm-11-20150325-UNOFFICIAL-tomato.zip.md5sum - 124 bytes
Philz Recovery: philz_recovery.img - 8.54 MB
Recovery: cwm_tomato.img - 8.20 MB
gapps: gapps-kk-20140105-signed.zip
Download previous version:
ROM: cm-11-20150313-UNOFFICIAL-tomato.zip - 227.41 MB
MD5Sum: cm-11-20150313-UNOFFICIAL-tomato.zip.md5sum - 124 bytes
ROM: cm-11-20150306-UNOFFICIAL-tomato.zip - 227.98 MB
ROM: cm-11-20150223-UNOFFICIAL-tomato.zip - 227.36 MB
Kernel Update: boot.img - 6.07 MB
MD5Sum: cm-11-20150207-UNOFFICIAL-tomato.zip.md5sum - 124 bytes
ROM: cm-11-20150207-UNOFFICIAL-tomato.zip - 227.35 MB
ROM 05/02/2015 - 227.16 MB
Installation:
First flash recovery image file (CWM recovery)
Code:
sudo fastboot -i 0x1ebf flash recovery cwm_tomato.img
Now boot to this CWM recovery.
FactoryReset/ Clear Data. Clear Cache.
Install cm-11-2015????-UNOFFICIAL-tomato.zip (ROM file) from sdcard.
Reboot system & enjoy CM-11.0 ROM.
If needed download & flash gapps also.
Update Installation:
Download kernel update -> boot.img file.
Go to downloaded file location.
Then flash your kernel (boot.img) using following command.
Code:
sudo fastboot -i 0x1ebf flash boot boot.img
Tested following all are working...
3G, WiFi, voice, Camera, Bluetooth, OTG
Contributors
Cyanogenmod dev, YU Developers
ROM: CyanogenMod
Build date 2015-02-04
Last Updated 2015-03-25
Reviews:
mani30bloom said:
This ROM + ThunderZap Kernal. Working Awesome! Battery back up is decent. Like this one more than Stock ROM. Thanks!
Click to expand...
Click to collapse
RajGopi said:
No i dont have reboot to recovery issue. Mine goes to recovery when i opt for reboot to recovery from power menu.
Battery life awesome than stock rom n than any other rom
Click to expand...
Click to collapse
RohanAJoshi said:
@dumtara : i m using this rom from yesterday..
overall impression is good..
one major thing is transition animations are lot more smoother than any other rom, even better than stock cm11s rom..
thanks for this dev..
keep updating when there are new device or kernel commits done..
Click to expand...
Click to collapse
freakzapster said:
More smooth and battery friendly than what we get out of box.
This is more light.
Sent From My Yureka
Click to expand...
Click to collapse
RohanAJoshi said:
stock is cm11s and this is cm11, so most of things will be same. but we will get fresh build over cm11s (compiled with latest device and kernel commits)
Click to expand...
Click to collapse
PRRash said:
Doesn't install with twrp. Any specific reason for this ?? Able to do good with the shared recovery though..
Rom is smooth and camera has improved a lot with stock CM app.
Click to expand...
Click to collapse
PRRash said:
Anybody facing issue with proximity when on call for longer periods.. For me the screen keeps on during call often i use the dialpad and does not go off again. Also the call screen goes to background after some, i gotta pull down the status bar to get it back. Could not find any settings for this,, am i missing anything here ??
Click to expand...
Click to collapse
My system's status when building ROM.
Anything different from the stock rom..?? Congrats on the rom build..
Sent from my AO5510 using XDA Free mobile app
Any changes apart from the stock
dumtara said:
I build this ROM using CM11.0 source for tomato aka YU Yureka.
I am not the developer of this ROM. I just build this ROM.
This ROM does not have gapps (Google Play Strore & other google goodies)
Prerequists: YU should be on stock rom.
Here is how to install this ROM.
First flash this recovery image file cwm_tomato.img - 8.20 MB (CWM recovery)
Code:
sudo fastboot -i 0x1ebf flash recovery cwm_tomato.img
Download: ROM - 227.16 MB
Now boot to this CWM recovery.
FactoryReset/ Clear Data.
Clear Cache.
Install Zip (ROM file) from sdcard.
Reboot system & enjoy CM-11.0 ROM. If needed flash gapps also.
Tested following all are working...
3G, WiFi, voice, Camera, Bluetooth
Contributors
Cyanogenmod dev
ROM: CyanogenMod
Build date 2015-02-04
Last Updated 2015-02-04
Please check this : http://forum.xda-developers.com/yureka/help/help-build-warning-radio-update-t3021636 Build warning - radio update
Click to expand...
Click to collapse
Dear dumatara,
if i am not offending you. can u tell me ,any new features you have included.
PRRash said:
Anything different from the stock rom..?? Congrats on the rom build..
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
androidgalaxyman said:
Dear dumatara,
if i am not offending you. can u tell me ,any new features you have included.
Click to expand...
Click to collapse
stock is cm11s and this is cm11, so most of things will be same. but we will get fresh build over cm11s (compiled with latest device and kernel commits)
In CPU-Z this ROM is showing battery capacity as 2500mAh, where as in stock rom it shows 2000 mAh
PRRash said:
Anything different from the stock rom..?? Congrats on the rom build..
Sent from my AO5510 using XDA Free mobile app
Click to expand...
Click to collapse
More smooth and battery friendly than what we get out of box.
This is more light.
Sent From My Yureka
Battery.
@dumtara : i m using this rom from yesterday..
overall impression is good..
one major thing is transition animations are lot more smoother than any other rom, even better than stock cm11s rom..
thanks for this dev..
keep updating when there are new device or kernel commits done..
@dumtara : will you please update this rom with new commits from device and kernel tree ?
there are new kernel commit for camera.
https://github.com/CyanogenMod/android_kernel_yu_msm8916/commits/cm-11.0
.
edit : there are also update in blobs :
https://github.com/TheMuppets/proprietary_vendor_yu/commits/cm-11.0
RohanAJoshi said:
@dumtara : will you please update this rom with new commits from device and kernel tree ?
there are new kernel commit for camera.
https://github.com/CyanogenMod/android_kernel_yu_msm8916/commits/cm-11.0
.
edit : there are also update in blobs :
https://github.com/TheMuppets/proprietary_vendor_yu/commits/cm-11.0
Click to expand...
Click to collapse
work started :good:
dumtara said:
work started :good:
Click to expand...
Click to collapse
how much time it will take ?
waiting..
RohanAJoshi said:
how much time it will take ?
waiting..
Click to expand...
Click to collapse
May be by tomorrow I will upload the updated ROM.
edit: updated cm-11-20150207-UNOFFICIAL-tomato.zip - 227.35 MB
dumtara said:
May be by tomorrow I will upload the updated ROM.
edit: updated cm-11-20150207-UNOFFICIAL-tomato.zip - 227.35 MB
Click to expand...
Click to collapse
very fast bro, will test asap and report back..
dumtara said:
May be by tomorrow I will upload the updated ROM.
edit: updated cm-11-20150207-UNOFFICIAL-tomato.zip - 227.35 MB
Click to expand...
Click to collapse
is dirty flash ok or clean flash
freakzapster said:
is dirty flash ok or clean flash
Click to expand...
Click to collapse
If updating from previous build i.e. cm-11-20150204-UNOFFICIAL-tomato.zip, nothing to clean/wipe, I just flashed the newly updated ROM.
But if flashing on Stock ROM, I did clean flash. I have not tested dirty flash.
dumtara said:
If updating from previous build i.e. cm-11-20150204-UNOFFICIAL-tomato.zip, nothing to clean/wipe, I just flashed the newly updated ROM.
But if flashing on Stock ROM, I did clean flash. I have not tested dirty flash.
Click to expand...
Click to collapse
Can you give change log if possible
I'm on 31 / 01 / 15 built
Sent From My Yureka
freakzapster said:
Can you give change log if possible
I'm on 31 / 01 / 15 built
Sent From My Yureka
Click to expand...
Click to collapse
RohanAJoshi said:
@dumtara : will you please update this rom with new commits from device and kernel tree ?
there are new kernel commit for camera.
https://github.com/CyanogenMod/android_kernel_yu_msm8916/commits/cm-11.0
.
edit : there are also update in blobs :
https://github.com/TheMuppets/proprietary_vendor_yu/commits/cm-11.0
Click to expand...
Click to collapse
As mention by RohanAJoshi, new commits over my previous build dated:04022015, included in this ROM.
@dumtara : any new build bro ?
also will you plz try clobbered build this time ?
in new builds, camera quality also improved, will wait for new update.
also manually update blob from this link because sometimes blob remains old. (just delete your blob folder and resync)
RohanAJoshi said:
@dumtara : any new build bro ?
also will you plz try clobbered build this time ?
in new builds, camera quality also improved, will wait for new update.
also manually update blob from this link because sometimes blob remains old. (just delete your blob folder and resync)
Click to expand...
Click to collapse
blob was updated last time from the link given by you using git clone option.
regarding update, is there any new commits.
dumtara said:
blob was updated last time from the link given by you using git clone option.
regarding update, is there any new commits.
Click to expand...
Click to collapse
Yes, some kernel commits.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Interested in Porting/Building BeanStalk on another device?
Please visit the BeanStalk Development Thread to avoid cluttering this thread.
CyanogenMod 13 based
PIE
Built in Task Manager switcher
OnTheGo Mode
App Circle bar
System UI Tuner
Quicker system animations
Trimmed down fat and excess bloat
Option to enable all widgets
Numerous extra lockscreen options
LCD Density
Custom original BeanStalk Wallpapers by skyliner33v
Custom BeanStalk bootanimation by skyliner33v
3-minit battery support
Clock and date options
Contextual Header - Original and Polygraphic
Battery styles - Includes specific colors and styles. Also includes battery bar
Do not disturb option
Show notification count
Recent screen options
Customizable navigation bar
Use Omniswitch as default recents
Built-in screen record
Toast animations
App Circle bar
Gesture Anywhere
Disable FC warnings
Disable Immersive message
Force expanded Notifications
Configure scrolling cache
Build.prop MOD options to enable/disable tweaks as preferred
Less frequent Notification sounds options
CRT screen off/on options to specify how the animation shows
Enable/disable wake up on charge option
Superuser fully embedded into the build and accessed from settings menu
CM Performance options and features
Hide superuser icon
Developer options and advanced reboot enabled by default
Numerous cherry-picks and improvements throughout the build.. baked into the awesomeness of existing CM layout.
Numerous other options hiding throughout the build. For a full list of changes and features, please be sure to checkout changelog below.
- To be determined...
Download 6.0.x GAPPs from here - Thanks Open Gapps team.
** Please make sure you select the correct GAPPs for your device requirements. I suggest the mini package. Anything
else is overkill IMO. **
For a complete listing of all (other) supported BeanStalk devices and downloads, please visit BeanStalk Downloads page
New Builds:
P3100
BeanStalk-6.15-20160501-espresso3g.zip
P3110/P3113
BeanStalk-6.15-20160501-espressowifi.zip
Old Builds
p3100 (espresso3g)
BeanStalk-6.15-20160424-espresso3g.zip
BeanStalk-6.14-20160417-espresso3g.zip
BeanStalk-6.14-20160409-espresso3g.zip
BeanStalk-6.13-20160403-espresso3g.zip
BeanStalk-6.13-20160331-espresso3g.zip
p3110/p3113 (espressowifi)
BeanStalk-6.15-20160423-espressowifi.zip
BeanStalk-6.14-20160416-espressowifi.zip
BeanStalk-6.14-20160408-espressowifi.zip
BeanStalk-6.13-20160402-espressowifi.zip
BeanStalk-6.12-20160330-espressowifi.zip
Beanstalk Change Log
Change log can also be found from within the ROM by going into settings menu -> about phone -> about beanstalk -> changelog
* Download ROM and latest GAPPs.
* Copy ROM and GAPPs from above to sdcard.
* Reboot into recovery (TWRP 3.0.0 recommended for backwards compatibility)
* Full wipe and format is ALWAYS suggested to avoid odd issues.
* Flash ROM and then flash GAPPs.
* Reboot and enjoy BeanStalk goodness.
BeanStalk source can be found HERE
CyanogenMod source can be found HERE
Device-Source
https://github.com/cyanogenmod/android_device_samsung_espressowifi, https://github.com/cyanogenmod/android_device_samsung_espresso3g
Kernel-Source https://github.com/cyanogenmod/android_kernel_samsung_espresso10
XDA:DevDB Information
Beanstalk6, ROM for the Samsung Galaxy Tab 2
Contributors
CodyTXR0KR, @scott.hart.bti, @Android-Andi, @Ziyan
Source Code: https://github.com/scotthartbti/android
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-04-02
Last Updated 2016-04-01
Good job - always good to have options!?
Sent from my Nook HD+ using XDA-Developers mobile app
Why does everything say MOD?
hkjr said:
Why does everything say MOD?
Click to expand...
Click to collapse
There was a bad commit in the CM source. It's been reverted, running new builds now. If you're using a p3113 the 6.12 build works well, if not new downloads will be available this weekend.
I will test the new build soon and provide feedback!
hope it will defeat some roms...
This would be compatible with 10.1 series as well, OP can update?
Everything is working fine for me on p3100 build 6.13
Sent from my Galaxy Tab 2 3G using Tapatalk
billysam said:
This would be compatible with 10.1 series as well, OP can update?
Click to expand...
Click to collapse
I will look into it. These take between 5 and 13 hours to compile on my old laptop(each), so 2 devices is already a big time commitment. However, I don't plan on building "nightlies", so I'll look into supporting my 10 inch borthers/sisters anyways.
joblee said:
Everything is working fine for me on p3100 build 6.13
Sent from my Galaxy Tab 2 3G using Tapatalk
Click to expand...
Click to collapse
That's great to hear. The 6.13 p3113 build has a nasty bug (as shown above), glad to hear one of them came out.
MOVING FORWARD:
I plan to build these as quickly as I can until it's as stable and bug free as I can get it, after which I'll probably only run updates bi-weekly. I really love this ROM, but it's a pain in the ass to build and I'm working with a very dated computer so please be patient. :good:
Work fine in p5110
Nice work, dude! Thank you for the new rom.
Everything works fine on the P3100.
No problems have been found yet .
I think that the update once a week , it is a good idea .
We are waiting your new builds )
Good luck !!!
Is it possible to overclock this kernel?
Ratata82 said:
Is it possible to overclock this kernel?
Click to expand...
Click to collapse
I don't believe so, but I haven't tried it myself to know for certain. It's just an unmodified CM13 kernel, so I doubt it, but IF it's possible it would be in "Settings>>Kernel Adiutor>>CPU"
Thanks Dude
A New ROM for our Device, Download and Test it on My P3100. Thanks Man :good:
armuttaqin said:
A New ROM for our Device, Download and Test it on My P3100. Thanks Man :good:
Click to expand...
Click to collapse
How is it?
Is 03.31 build compatible with twrp 3.0.0.2?
it's my fault, iam sorry, TWRP 3.0.1.0 make my device to espresso wifi
Marecki_ said:
Is 03.31 build compatible with twrp 3.0.0.2?
Click to expand...
Click to collapse
I don't see why it wouldn't be. I test with 3.0.0-0 because the newer ROMS build with a device name of "esspresso[wifi/3g]" and 3.0.1+ (afaik) doesnt support the old device names (p31xx) breaking backwards compatibility. 3.0.1+ will install espresso ROMS, 2.9x and older does p3xx ROMS, 3.0.0-0 is the newest 'old' recovery that does both, which I need.
I'll test it against the current TWRP this week.
Stuartz22 said:
Why no Phone Data ? I can't download whatsaapp Mesengger, they told not compatible phone.
---------- Post added at 07:26 PM ---------- Previous post was at 07:00 PM ----------
Why i can't use rom espresso 3g, system error in twrp 3.0.1.0
Click to expand...
Click to collapse
In both cases I need you to send me a logcat to help you. How to fetch a logcat
Beanstalk and TWRP both have built-in Terminal emulators.
Be sure you did a full wipe of Dalvik, System and Data. And the ROM matches your device, as that's the most common problem.
** edit: I see you worked it out. Hope you enjoy.
CodyTXR0KR said:
I don't see why it wouldn't be. I test with 3.0.0-0 because the newer ROMS build with a device name of "esspresso[wifi/3g]" and 3.0.1+ (afaik) doesnt support the old device names (p31xx) breaking backwards compatibility. 3.0.1+ will install espresso ROMS, 2.9x and older does p3xx ROMS, 3.0.0-0 is the newest 'old' recovery that does both, which I need.
I'll test it against the current TWRP this week.
In both cases I need you to send me a logcat to help you. How to fetch a logcat
Beanstalk and TWRP both have built-in Terminal emulators.
Be sure you did a full wipe of Dalvik, System and Data. And the ROM matches your device, as that's the most common problem.
** edit: I see you worked it out. Hope you enjoy.
Click to expand...
Click to collapse
I flashed the 20160402 build and Slim Gapps on my p3110 with TWRP 3.0.0.1 and it boots OK. The Rom seems working fine. Back botton kill app don't work and I don't like bootanimaton in landscape mode, but it's cosmetic. Great work. Good to see other options for the old tablet. Thank you so much
New Builds:
P3100
BeanStalk-6.13-20160403-espresso3g.zip
P3110/P3113
BeanStalk-6.13-20160402-espressowifi.zip
(*Tested 'MOD' bug fixed*)