OK as i promised i built my kernel.
Before anything i want to thank iodak which gives us nice codes and nice ideas i never took alone, laufersteppenwolf and kholk.
The code is substantially the iodak v1 code but i added some bugfixes from externity project and some Werewolf kernel features.
I'm not the "author" but just for the community i "mixed" all the best i can found actually in the net and during the time i'll research and add some interesting feature i'll found.
The new Revolution version is based on Demetris codes (Optimus Prime-play) but indeed i mixed most of the codes i found on the net.
CHANGELOG and UPDATES
Initial features:
- Same as iodak v1
- CPU at 1.7 ghz
- Optimized ksem algorithm [by Ezeekiel]
- Gpu clock interactive regulation, max frequence 766 mhz but i suggest to not go more than 600 mhz
- Added gaming and pmc cpu governors [Thanks Laufersteppenwolf]
- Temp throttle skin raised at 48 ° C and cpu throttle frequence increased at 1300 mhz
- Lot of bugfixes from Linux developers
V1.5
- implemented uhid support (for usb peripheric but i can't test it)
- modified freeze-wake-standby system (thanks TripNRaVeR)
- added araragi fix for wakelock
- various bugfixes and tweaks
- added cpu topology definitions, new voice in trickstermod for powersaving
- rebased clock table on multiple of 102 mhz for cpu_0 and cpu_g
- some other tweaks and bugfixes
V1.51
- Improved cpu topology code
- Restored interactive number of active cpu selectable
- other various bugfixes
V1.52
- added cfg i/o scheduler
- some other little patch and bugfix
V1.55 "BE CAREFUL, THIS IS NOT STABLE FOR ALL PHONE, I CAN JUST TELL IT'S REALLY STABLE ON MINE"
- raised voltages
- added fastcharge
- rebased all cpu clocks
- unlinked gpu
- raised some clocks
- compiled with Linaro toolchain gcc 4.7.3 13.04
V2
- Various bugfixes from different authors in the net
- Lot of commits from TripNraver optimized kernel for HTC ONE X
- Zram updated with Snappy google compression, it should give more i/o speed
- araragi features with the new inspired by kholk Livecolor code
- HTC ONE X clock table
- LP core voltage table editable in Trickster mod
- Enabled Swap
- Enabled 100 200 and 300 mhz clock step usable
- OC for gpu and ram
- Compiled with Linaro toolchain 4.7.4 and optimizations
- UKSM script ported from 3.0 kernel
- Restored stock thermal framework
V2.1
- New thermal tweaks from demetris
- balanced cpuquiet governor from demetris
- enabled zcache (thanks faux)
- Xpad support
- some other thing not worth to be explained here
- FOR ANDROID 4.3 only atm !!!!!
REVOLUTION 1
- Rebased entirely on Demetris' Optimus Codes
- Less controls in trickstermod, just cpu Voltage
- gpu at 520 mhz
- no more overclock since it's not stable with this code
- all the features of optimus primes except cpuquiet selectable governor
- huge number of patches and bugfixes
- need your feedback for stability
PRE-REQUIREMENTS
UNLOCKED BOOTLOADER, ROOT AND RECOVERY!
HOW TO INSTALL
1 Download the KERNEL version which fits with your needs
2 Copy the zip to your sdcard
3 Boot into recovery
4 Flash the zip
5 Wipe cache/dalvik (not required everytime)
6 Reboot
Download Links:
REV 1 05/09/2013
Stock REVOLUTION 1 link: https://www.dropbox.com/s/cxw92g7w8rx7cu7/PH85_REV1_KERNEL_STOCK_P880.zip
CM10.2 REVOLUTION 1 link: https://www.dropbox.com/s/acmnidv4bl7s4az/PH85_REV1_KERNEL_CM10.2_P880.zip CM10.2 VERSION NEEDS TO BE FIXED
PH85 old project
Stock best version v1.52: https://www.dropbox.com/s/ia0ohxouure2q1z/PH85_KERNEL_P880_V1.52.zip
- Bluetooth not working fine in following versions but it has great performances
CM10.1 version v2.15 : https://www.dropbox.com/s/bypkitzbm2b507o/PH85_V2.15_KERNEL_CM10.1_P880.zip
CM10.2 version v2.15 : https://www.dropbox.com/s/8s8ezn4ffbhgg6e/PH85_V2.15_KERNEL_CM10.2_P880.zip
My github
Original PH85 project: https://github.com/Pesach85/ph85-p880-kernel-project
Revolution 1 project: https://github.com/Pesach85/lge-kernel-p880
THANKS
I want to thank all the XDA community and all people which trasmitted me the passion to compile by myself a kernel and add features
People which i met here in xda from long time like berni and iodak and new developers i met here in p880 section like demetris, laufersteppen wolf and many other i can't nominate here.
Some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First a question: is it for stock or CM?
Then, do I get you right that this is kernel is more-less cherry-picked?
But anyways, thanks for your work
Sent from my LG-P880 using xda premium
If cherry picked stay for "i use your sources because i'm not able to code by myself", yes it is
Anyway yes almost it is.
Follow my github to see what i change
Sent from my LG-P880 using xda app-developers app
Pesach85 said:
If cherry picked stay for "i use your sources because i'm not able to code by myself", yes it is.
Anyway yes almost it is.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Yeah, that's what it means
It comes mainly from git, where you've got the ability to "cherry-pick" single commits
BTW, your github it down
Sent from my LG-P880 using xda premium
I not use exactly cherry pic function i use the old fashioned way copy-paste because i feel more comfortable with
You should see the commit with github app anyway
Sent from my LG-P880 using xda app-developers app
Tested it, and it appears that mobile data aand wifi are not working. It also lags at times when I unlock the screen. Everything else is ok though.
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Flying_Bear said:
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Click to expand...
Click to collapse
Theorically raising the throttle temps this Tegra 3 platform can reach the One X (customized) level but this phone overheats too soon so i tried to setup the best i can without raising too much the temperatures limit.
The GPU clock doesn't give increase in perfomance, i tested it before editing the sources, even if you raise all GPU frequency at 600 i guess for the same thermal reason.
So for now i think i found the best overlock/battery drain compromise without compromise stability.
We all know this nvidia platform could indeed give much more performance with a better thermal cooling.
Pesach85 said:
Theorically raising the throttle temps this Tegra 3 platform can reach the One X (customized) level but this phone overheats too soon so i tried to setup the best i can without raising too much the temperatures limit.
The GPU clock doesn't give increase in perfomance, i tested it before editing the sources, even if you raise all GPU frequency at 600 i guess for the same thermal reason.
So for now i think i found the best overlock/battery drain compromise without compromise stability.
We all know this nvidia platform could indeed give much more performance with a better thermal cooling.
Click to expand...
Click to collapse
Gpu overclocking helps the odd game, MC4 for example
Sent from my rooted P880
Can u do cwm zip to install from phone cause i have no pc here
Sent from my LG-P880 using xda app-developers app
emre81tr said:
Can u do cwm zip to install from phone cause i have no pc here
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Use tefminal emulator, you can flash it from there
Flying_Bear said:
Use tefminal emulator, you can flash it from there
Click to expand...
Click to collapse
How will i do ? Where do i put the image file
Any instaction
Sent from my LG-P880 using xda app-developers app
Flying_Bear said:
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Click to expand...
Click to collapse
how solve baseband xmm wakelock issue?
View attachment j794_root.rar
emre81tr said:
How will i do ? Where do i put the image file
Any instaction
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
1.download j794_root (if u dont have)
2.Extrat it
3. open the Extracted folder
4. j794_root/root/ copy the img file here.
5. go back and right click root folder by holding on SHIFT key.
6. Select "Open command windows here"
7. now you can type the commend in the instruction on command window i.e
Code:
adb push phv1boot.img /sdcard/
adb shell
su
cat /mnt/sdcard/phv1boot.img >/dev/block/mmcblk0p2
sync
reboot
Before doing this make sure the kernal iodakv2 is installed
Good luck:good:
I can in tegra overclock max set GPU freg 416MHz, CPU is ok 1,7GHz, how to set GPU higher frequency? I have before instaled iodak_v02 kernel, max GPU was 520MHz.
dann1989 said:
I can in tegra overclock max set GPU freg 416MHz, CPU is ok 1,7GHz, how to set GPU higher frequency? I have before instaled iodak_v02 kernel, max GPU was 520MHz.
Click to expand...
Click to collapse
Download trickster mod kernel settings, you can use this to raise the max gpu threshold
Sent from my rooted P880
plz cvm instaled
Whether there are improvements in battery?
Wifi not work for me and its not working on cyngmod
Sent from my LG-P880 using xda premium
emre81tr said:
Wifi not work for me and its not working on cyngmod
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
This kernel is not made for Cmod
Sent from my rooted P880
Related
The Ace Kernel-OC/Non-OC
FEATURES
Two versions-OC/Non-OC in single installer(Amarullz aroma installer).
Cleancache and frontswap support.
3 new frequencies to the overclocked kernel between 480 and 787 Mhz,i.e.,604,672 and 729.
Frequencies supported-OC-Version
122,200,245,320,480,604,672,729,787,806,825,844,864,883,902,921,940,960.
Frequencies supported-Non-OC-Version-
122,200,245,320,480,604,672,729,768,800
.Customizable governor adding and enabling/disabling logcat during install.
Total 19 cpu governors-
13-Default
Intellidemand
Smartass
Savagedgen
Smartass2
Scary
Performance
Lagfree
Interactive
InteractiveX
Brazillianwax
Ondemand
Conservative
6-Modules
Userspace
Powersave
ondemandx
lionheart
lazy
minmax
Ext4 patches from linux 3.0 kernel
Lib sha1 patches for 10% faster boot
6 I/O Schedulers-noop as default-Others being Deadline,SIO,VR,BFQ and CFQ.
Two way call recording.
Various performance improvements and battery life optimizations to the kernel.
BLN/TUN/CIFS/ZRAM
Some bug fixes
Disabled some logging and debugging options including logcat to improve battery life.If you require logcat you can enable it at boot time through amarulz installer.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
INSTALLATION
Download the zip from download section on project page as stated below on second post, put it in sdcard, reboot into clockworkmod recovery .Follow instructions in amarulz installer.Select OC/Non-OC.Select the next options(Governors/Logcat enable/disable).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
WARNING! CARELESS OVERCLOCKING MAY FRY YOUR PHONE.SO USE WITH CAUTION. I AM NOT RESPONSIBLE FOR ANY DAMAGE!
SOURCES
https://github.com/akashnk/android_kernel_samsung_cooper
Click to expand...
Click to collapse
DOWNLOADS
Latest Version-http://code.google.com/p/the-ace-kernel/downloads/detail?name=TheAceKernel-beta4.zip
All Downloads-http://code.google.com/p/the-ace-kernel/downloads/list
SOURCES
The linux kernel is under GPL.Whoever modifies it must share source code.
My sources-https://github.com/akashnk/android_kernel_samsung_cooper
http://code.google.com/p/the-ace-kernel/source/browse/#git%2Fsamsung_kernel_cooper
CHANGELOG
Code:
03/05/12-vBeta4
1.Added and enabled cleancache and frontswap.
2.Rewrote battery code again.
3.Added bfq i/o scheduler.
4.Enabled ksm.
5.Speed up access to cgroupfs mounted entries in /proc/mounts.
6.mmc: core: Fix possible race between runtime suspend and runtime resume.
25/04/2012-vBeta3.1
1.Deep sleep not working on wifi on should be fixed.
2.Modified lulzactive to tegrak lulzactive.
Lulzactive app from market working.
23/04/2012-Beta3
1. Add 3 more governors 13 default and 6 as modules.
2. Ext4 patches from linux 3.0 kernel.
3. change page writeback values.
4. Dm cache enabled
5. Lowered VDD levels of frequencies below 672 Mhz.
6. Add lib sha1 patches for 12% faster boot time.
7. Added ARM CPU topology
8. Fixed USB Tethering
9. use Amarulz installer script installer script.
10.Compiled wifi driver from ar6ksdk 3.0 source.
11.Disabled fsync.
12.Fixed memory leaks.
20/04/2012-Beta2
1.Optimized rcutree-better application responsiveness.
2.Added 3 governors-Intellidemand,Interactive and InteractiveX...Recommend Intellidemand for balanced battery and performance.
3.Removed some changes to drivers.
4.Performance update-removed some bugs and optimize more for performance.
18/04/2012-Initial Release
-Compiled from Samsung Kernel sources using Sourcery G++ Lite
-13 governors and 5 I/O schedulers
-3 new frequencies to overclock code in frequency table between 480 and 787 Mhz.
-Rewrote battery driver code(Thanks Anonymous and LibSc)
-Performance optimisations.Disabled some logging and debugging
-Added 2 way call recording
CREDITS
-Ketut Kumajaya for his source patches.
-Anonymous for his source patches.
-Developers of various kernels like SpeedMod,FreeXperia,Phiexz,TomGiordino etc. and their sources
-Code aurora
-Amarulz for the installer.
-LibiSC for formula showing correct mV
-Samsung for Source Code
-Google for Android.
FAQS
Why is logcat disabled and how do I enable it?
Logcat is a useful service to log and find out whats wrong with the system.But it runs even when it is not required
and eats battery.So I compiled it as module and disabled it by default.
You can enable it at boot by installer
or
To make it permanent Download This script here http://dl.dropbox.com/u/18323177/logcat-enabler.zip and flash it via cwm. If you want to delete it again just delete 37logcat
from /system/etc/init.d.
Click to expand...
Click to collapse
About Governor Modules?
Modules can be selected at boot which can be deleted from /system/etc/init.d later.
or
Governor modules can be loaded in the same way as other module.They are in /system/lib/modules.
e.g.- insmod /system/lib/modules/cpufreq_lionheart.ko
Remove modules
e.g.- rmmod /system/lib/modules/cpufreq_lionheart.ko
Click to expand...
Click to collapse
Why some can overclock to 921 Mhz and some only to 864 Mhz and others different frequency?
Every CPU is unique.The CPU may go upto different frequencies but they were tested for stability at a common 800 Mhz Frequency
only.
Click to expand...
Click to collapse
How to Overclock,Change Schedulers and Governors
You can use apps like No Frills CPU Control,SetCPU,CM settings or write some script yourself
Click to expand...
Click to collapse
What all these governors and schedulers do and how do I know what to use?
Have a look here
http://forum.xda-developers.com/showthread.php?t=1369817
Click to expand...
Click to collapse
First WOW! new Cm kernel
Sent from my GT-I9100 using xda premium
future may be
Welcome back! Will try your kernel
Excellent work
Cool.. will try..
Sent from my GT-S5830 using XDA
Nice work
Cool, hope it does something with the battery life
This is stable at 960 mhz?
Sent from my Nokia 3110i using xda premium
Cool...and, xda frequent question- how the battery life?
Spoiler
sent from my Nokia Pisang
dredremon said:
This is stable at 960 mhz?
Sent from my Nokia 3110i using xda premium
Click to expand...
Click to collapse
As stated in FAQ different phones will be stable at different frequencies.
encik_racun said:
Cool...and, xda frequent question- how the battery life?
Spoiler
sent from my Nokia Pisang
Click to expand...
Click to collapse
I need your feedback. I intend to increase battery life.
Testing now
Sent from my GT-S5830 using Tapatalk
Testing.
Sent from my GT-S5830 using xda premium
Who has tested?
Battery seems a little more consistent, percentage is not fluid thoug (eg 100% -> 91 in around 5 minutes of browsing on wifi).
Nice. This is a fusion of zImage-Mod and blackhawk? I am right? And one question more - why can by the frequency steps more normal - like in non-OC kernel, that means for example 800Mhz instant 806Mhz, or 735 instant 787, that will "look better".
Quadrant score?
Sent from my GT-S5830 using xda premium
dragonnn said:
Nice. This is a fusion of zImage-Mod and blackhawk? I am right? And one question more - why can by the frequency steps more normal - like in non-OC kernel, that means for example 800Mhz instant 806Mhz, or 735 instant 787, that will "look better".
Click to expand...
Click to collapse
I have used some parts of both anonymous and ketut sources and also other sources .
It is not about "looking better".It is about running at real frequency steps.Our Phone does not really run at 800 Mhz but at 787 Mhz.
On a stock Galaxy Ace the CPU gets its clock from different PLL's using dividers. Our device has 3 PLL's running at 245(PLL1), 960(PLL0) and 800(PLL2) MHz. The 480MHz step is using PLL0 divided by 2 and the "800MHz" step uses PLL2 divided by 1.
But this is not all.The PLL speeds are configured with a multiplier that can be configured up 63 (6-bits) and it multiplies with a clock called PLL_TCXO which runs at 19.2MHz. On the Galaxy Ace PLL2 is configred as 41*19.2MHz which means it really isn't running at 800MHz but rather at 787.2MHz.
The same applies for other speeds.
Hey hey hey,
proudly presenting my aosp kernel for you. Big thanks to Codeworkx, this kernel is based on his source! I´m not responsible if something happens to your device!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel can be used on:
- Every AOSP based rom (e.g. AOKP, CM9, Rootbox...)
Features:
- OC to 1.35Ghz
- GPU OC to 383mhz
- RAM OC
- UV
- I/O Tweaks
- Patches for better batterylife
- Performance Tweaks
- Fastcharge
- Swpa
- zRam
- NTFS and CIFS
Changelog (3.2.0):
Based of latest source code (the updated one)
Only compiled for jellybean (based on that updates)
Massive cleanup
Optimized code used
Optimized undervolting
Really the fastest horsepower ever
Added 1.5Ghz Overclock
Added OMAP_IPU_IDLE_CONFIG
Added reduced wifi voltages for power savings
Updated SIO
Tweaked CPU-IDLE governor
Fixed 1.35Ghz jumping back
Fixed screenFlickring
Fixed screenoff animation failing sometime
Fixed heat -> lower cpu voltages should be stable enough
Changelog (3.1.0):
Now again booting
Horsepower is complete rebased - clean - fast - stable
ClockWorkMod autoreboot issue is fixed
All sources updated -> speed
USB Mass storage is working correct now on aosp kernel
Default governor is now abyssplug
Changelog (3.0.0):
Horsepower is now available as a BETA version for stock roms
Low RAM OC
Performance tweaks
Code Cleaning
Preparing for dualboot (still long way to go)
Changelog (Release 2.1.5):
Added savagedzen governor
Added sakuractive governor
Added brdzilianeax governor
Added minmax governor
[*]Added abyssplug governor
Added lulzactive governor
Added lazy governor
Added pegasusq governor
Added smartassv2 governor
Added scary governor
Added HYPER governor
Added wheatley governor
Updated interactive governor
Updated interactiveX governor
Updated lagfree governor
Changed default governor to smartassv2
Changelog (Release 2.0.6):
Rebased ics kernel
No Touch recovery for both (ics and jb) versions
Added possibility to undervolt
300 mhz as default cpu speed
Changelog (Release 2.0.0):
Jellybeaned! Both versions (ics and jb) contain same features
Changelog (Release 1.3.5):
Added core2 managemend
Fully working settingsfor fastcharge (through app)
Hope to improve stableness by disabling interactivex governor. Thanks to aidfarh!
Touch and no touch recovery versions
Changelog (Release 1.3.1):
Added interactiveX governor
Added lazy governor
Enabled ip tunneling
Changelog (Release 1.3.0):
Enabled fastcharge (enable in app)
Enabled zRam (partly working, full support in jellybean)
Enabled NTFS support
Enabled CIFS support
Added Touch CWM (Swipe up + down to navigate; swipe right to select; swipe left to go back)
Improved CWM
Improved TouchScreen support
Changelog (Release 1.1.0):
Fixed Wlan
Fixed OC
OC Tweaks
Initial GPU OC to 384mhz
Set min processor speed to 0.15Ghz for better batterylife
Rebuild whole kernel
Added more I/O tweaks
Added USB fast charging
First start at deep idle not fully working yet
Improve kernel stability by not killing kernel threads
Changelog (Initial Release 1.0.3):
keyboard: cypress: Stop notification on low battery
improve the performance of memcpy and memmove of the general version
i/0 tweaks
initial OC to 1.3Ghz
expanded OC to 1.35Ghz
prepared for lulzactive gorvernor
For detailed information visit my github commit list
Installation instructions:
- Download the attached .zip
- Put it to your internal sd-card
- Go into recovery mode
- Hit "install zip from sdcard"
- Reboot and enjoy
Download:
Horsepower 3.0.0 for Stock ICS Roms BETA!
Horsepower 3.0.0 for AOSP ICS Roms
Horsepower 3.1.0 for AOSP Jellybean Roms
__________
Core2Management:
Save your battery and disable the second core of your android device when you dont need it!
!- This app is only for dual core devices made by Samsung -!
This app should work on most android dual core devices from Samsung (maybe also on others but these are untested!). Please report on which devices the app works and on which it doesnt. You have to be rooted! Every time you reboot you need to redisable second core! If the second core starts again at some time use another governor. Not working with hotplug!
Tested devices:
* Galaxy S2 I9100
* Galaxy S2 I9100G
* Galaxy S3
* Galaxy S1
* Galaxy R I9103
* Galaxy Nexus
The app is working with stock cm10 kernel, too!
__________
Sources:
https://github.com/fuss132/android_kernel_samsung_t1/
Awesome!
Gesendet von meinem GT-I9100G mit Tapatalk 2
Now that's what i'm talking about !!
You are the BEST fuss!
This is God like! ^^
YESSSSS :beer:
Sent from my GT-I9100G using Tapatalk 2
Than man u are the best
great.... fuss does this kernel have MMC_CAP_ERASE capability flag disabled like super ICS kernel..? and does the OC include GPU as well?
Great but am I missing something or the download link isn't available yet ?
dante10 said:
great.... fuss does this kernel have MMC_CAP_ERASE capability flag disabled like super ICS kernel..? and does the OC include GPU as well?
Click to expand...
Click to collapse
First one if cm9 kernel has it then this one too I didnt looked at every single commit sorry ^^ and second one not at the moment but maybe some times
Madarox said:
Great but am I missing something or the download link isn't available yet ?
Click to expand...
Click to collapse
I added it in this second
I've no access to market! Could you upload the app please ?
pesiran said:
I've no access to market! Could you upload the app please ?
Click to expand...
Click to collapse
See the attachement
But for all the others you should prefer the play store one as it will be updated regulary
The things looks better for our G version thanks to those awesome devs
Enviado desde mi GT-I9100G usando Tapatalk 2
fuss132 said:
First one if cm9 kernel has it then this one too I didnt looked at every single commit sorry ^^ and second one not at the moment but maybe some times
I added it in this second
Click to expand...
Click to collapse
oh...sorry didn't see it was based on CM9 kernel..code says CM9 kernel have those MMC thing disabled so its safe from those brick bug...i assume this kernel also safe because it is based on CM9 kernel...good work buddy...
fuss132 said:
See the attachement
But for all the others you should prefer the play store one as it will be updated regulary
Click to expand...
Click to collapse
Not found Error !
ok,1st problem:I can't turn on wifi...I'm on CM9 RC.
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
philippsp said:
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
Agree, but cpu is stable. Now higher scores in benchies Thanks man, hope you will fix the wifi problem.
wifi cm9 rc1?
fuss, thanks for great work, but there is a problem of wifi in CM9 rc1 does not function
philippsp said:
Wifi isnt working after flashing..
Gesendet von meinem GT-I9100G mit Tapatalk 2
Click to expand...
Click to collapse
Madarox said:
ok,1st problem:I can't turn on wifi...I'm on CM9 RC.
Click to expand...
Click to collapse
cesco73 said:
fuss, thanks for great work, but there is a problem of wifi in CM9 rc1 does not function
Click to expand...
Click to collapse
Youre all on CM9 right?
I already found the problem fix soon... Your rom needs an updated wlan.ko module Those cm9 roms these days
If you would use aokp it would be working ^^
WIFI is not working on rootbox too !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ARM.
The Next Reliable Managed Architecture.
NOTE
- ARM or Android Reliant Management, Aims to bring full battery saving to our devices and add features not introduced. This would of course reduce battery hunger and at the same time, sustain the performance of our phones.
THIS IS A MODDED Kernel with Many fantastic features within. I am not responsible or credited for the kernel source codes whatsoever. I only modify the kernel to my needs and add more features not available from the base which will be beneficial to all of us. This Kernel is GPL Compliant and is fully Open Source. Please provide a CLEAR Credit should you use this Source as your base.
Click to expand...
Click to collapse
- Dynamic Frequency Mode - Improves Battery Life & Performance
- Added Governors for more options
- Tweaked to the limit for more performance
- Sustained Battery Life while improving Performance
- Added More I/O Schedulers for more options
- Edited/Re-Engineered Hardware modules for more Power Savings
- Overclocking up to 1.5GHz (EXPERIMENTAL. Use at your own risk)
- Overvolting for high performance activities
- Undervolting for Power Saving
Click to expand...
Click to collapse
Source Code Distribution
Github [CM] - Source
===============CHANGELOG=================
Base : CyanogenMod 10
Maintainers : nicholaschw
=Older Bootloader=
~~~~~~~~~~~~~~
Nightly 1
- Initial build
- Toolchain Fixes
- Added Powersave governor
Nightly 2
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
=Newer Bootloader=
~~~~~~~~~~~~~~
Nightly 3
- Initial Build
- Fixes for Wireless compiling bugs
- Toolchain fixes
- Added Powersave, Hotplug & SmartAssV2 Governors
- Added SIO Scheduler 2012
- Tweaked I/O Schedulers
- Added Dynamic Frequency Mode
= In dynamic frequency mode, all parameters are managed for each frequency and the cpufreq governor can control system more fair for all frequencies.
Nightly 4 FINAL
- Added lulzactive governor
- Added 1.5GHz OC
- Add OV Support
- Add UV Support
- Tweaks into drivers
Nightly Plus
- Fixed Zip (Thanks to benee)
- Added some extra modules
- Rebased Sources to fix toolchain related errors
Nightly Build 6
- Reduced OC to 1.3GHz
- Fixed voltage arrays
Nightly Build 7
- Added configs for OC
- Disabled OC for now
v1.00 Golden Master
- Tweaked OC for stability
- Reduce backlight brightness to minimum
- Tweak the DVFS for UV and OV Stability
Click to expand...
Click to collapse
====================
Bugs + CM +
--------
- All CM10 Kernel Bugs
-Credits-
CyanogenMod, for providing AND fixing the source codes actively
YOU, Readers, for providing me a place to allow you to give me suggestions
Xonar, For assisting in many parts of the modifications
cyclon, for introducing new modifications
Google, For allowing me to identify whatever errors i face.
Vork & Koush, For AnyKernel Flashable Zip
benee for the zip fix
The Other Githubers who I merged commits into source
> XDA Community, Giving comments on whatevers best for implementations
ANY FLAMING OR CRITICISM WILL BE REPORTED.
ARM., Is not to be mistaken with ARM. ARM. Is not related to ARM Whatsoever in terms of name.(We use ARM for our processor, so we are related somehow by, the ARM architecture used in our phones.)
+DO NOT MIRROR+
EVERYTHING IS GOING ACCORDING TO DATE OF RELEASE.
Bug Reports? Post them here. Please include a logcat and dmesg and a brief situation of what happened visually. Doing this will get your bugs fixed faster.
How To Install
- Download the flashable zip below
- Put it into your sdcard (Anywhere you like. Just remember its location)
- Boot into recovery
- Wipe cache, Dalvik Cache (NO NEED TO WIPE DATA UNLESS YOU WANT TO)
- Install the zip package
- Reboot
- Enjoy the Excitement!
Troubleshooting?
- WIFI Failure = - WifiModule-ConservativePM-V3.zip -> super conservative on battery, less wifi reception
Download
- WifiModule-NormalPM-V3.zip -> will go in full mode when not asleep, a bit more power hungry, full wifi reception
Download. (Thanks to pengus77)
Link List - CYANOGENMOD BASED (Old Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-Nightly1-P990.zip - 5.08 MB [28-12-12]
md5: 7d36e7ac1891345ce89e62326a9979be
ARM-Nightly2-P990.zip - 5.08 MB [28-12-12]
md5: e46c3a8c989d61b67d8a4d2e437a26b9
*NOTE* OLD Bootloader Version will carry on, but each release takes longer than the new bootloader
Link List - CYANOGENMOD BASED (NEW Bootloader)
EXPERIMENTAL/NIGHTLY BUILDS
==================
All Builds below are experimental. Flash at your own risk.
ARM-P990-Nightly3.zip - 5.08 MB
md5: d52342cb01a3b60a11cca65a8b208a0a
ARM-P990-Nightly-FINAL.zip - 5.09 MB
md5: 7c4ccf986c9fda2105b6462adcd51487
ARM-P990-NFPlus.zip - 4.78 MB
md5: 580c2e29326ea0b5d016baccffadf7f4
ARM-P990-B6.zip - 4.78 MB
md5: 0f2842812e41b235d6bf14acac2511a3
ARM-P990-B7.zip - 4.78 MB
md5: f3cde8f65bf3e7875f84247799d0e235
FAQs
+ Q: Whats the difference?
A: Read the disclaimer.
+ Q: Will I get worse performance than the Official CyanogenMod Kernel?
A: It depends on what commits are added. My Kernel only fixes bugs i can fix and which are unsolved and Of course, I will add more features not available in CyanogenMod Official
+ Q: What makes the stock kernel different?
A: You get goodies, and furthermore, better battery life and performance in this project.
Nice to see a singaporean are so gd in it. Gd job Bro
Is it compatible with unlocked new boot loader?
Sent from my LG-P990 using xda app-developers app
oOPS, me forgot to mentionn,
New bootloader version to be released next week.
This is a clean build of the old bootloader, note that only features come in next week.
For the new bootloader, the initial is next week and features come in the following week.
EDIT~
Push the newsworthy thread link now! When we go on the portal news, you get ten times more goodies! Help ARM. develop its potential!
good luck with your arm project sir. cant wait to test for the new bootloader version.
mkchan said:
good luck with your arm project sir. cant wait to test for the new bootloader version.
Click to expand...
Click to collapse
sure!
almost want to go to old BL just to try it =D. sounds erpic!
no testers reported back yet?
If it is not to much for you can you please releas the nightly not only for the new (bl) in the future. also for the old (BL).
Gr8 News, cant wait next week to try the new bootloader version :good:
Thanks for the Hard Work!
Great! Thanks for your work man, tried and seems very good! But the freq of the cpu in interactive gov is always at 1000mhz xD
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
nicholaschw said:
Updated OP with new nightlies.
Compatible with New Bootloader.
Check the changelog for more features
Next builds to improve clocking, graphics and modular savings.
Includes:
Overclocking
Underclocking
Undervolting
Overvolting
GPU Overclocking
LED Dimming
Minimal Brightness module
The LED and minimal brighness module mods are ported from my previous commits from Optimus Black
Enjoy~~
Remember to click Newsworthy Thread for a fast update!
Click to expand...
Click to collapse
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
kekks said:
Thanks, will try it out. Great to see some JB rom's for the new BL
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Its a Kernel. -_-
thanks definitely gonna try it.....working with new bl is the great news.....Thanks....
Me gusta
nicholaschw said:
Its a Kernel. -_-
Click to expand...
Click to collapse
xD
--------------
Well, I don´t know where the 'bug' is coming from, but since the new CM10, notification light isn't working anymore. I'm no kernel developer but I think the issue is there anywhere.
It would just be nice if you maybe could have a look there, as it's a feature, I miss for more then a month now.
With the kernel on the new bootloader my Wifi doesn' t work -.-
Gesendet von meinem LGP990 mit CM10.
Please Read the 2nd OP before posting bugs here.
And, updated OP for WIFI Fix.
Take note, the fix is only for those who get those issues. DON'T Flash unless you get the problem.
Now, If you let me peacefully add more features
Saving up for an O2X!
EDIT
Updated OP for final Nightly.
Next version is the GM. Its the final version before release channel, which will be uploaded to ROM Manager's database.
hi there nicholas, i was just wondering, since this kernel looks very promissing, is there any chance of merging voodoo sound support in the future?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the original HTC kernel for Butterfly s My Butterfly S project stops here.
Today I changed the rear camera (due to the purple issue), and after I closed the phone no way to switch it on, I reopened the shell and after a long search I've found a little flat cutted (the one fron the power on button).
It means to change the mainboard, and I have no intention to make this job.
Just wanna say thanks to anyone who wrote to me along this months.
Now I will move on m9.
Good luck and long life to Butterfly S, still one of the best phones.
Informations :
Stock 5.0.2 HTC Kernel rel. 3.4.10
Giampa's Kernel for Android 5.0.2
Source: GitHub
Compiler Toolbox: Linaro_arm-cortex_a15-linux-gnueabihf 4.7.4.
Kernel Version: 3.4.10
defconfig: dlxp_ul_defconfig
Supported Devices :
Daily use on DLXP_UL
DLXP_U you just try and let me know (got a few positive feedbcaks)
Supported Roms :
Still 100% working (compass too) on stock and modified ROM 5.16.709.4 (thanks to Migascalp)
About others ROMs you just try and let me know.
Features :
Wake gestures support.
GPU Overclock.
CPU Overclock.
USB Fastcharge.
ExFAT support.
Perflock removed.
Changelog :
Code:
1.0.0
- Initial release
1.1.0
- Added simple GPU Governor
- Added GPU Overclock
1.2.0
- Added CPU Overclock
- Added more CPU min frequncies
1.2.1
- Added SmartassV2 & Lulzactive CPU Governors
1.2.2
- Removed 2214 Mhz Overclock
- Changed voltage range to allow 2106 Mhz full operative
1.2.3
- Removed Back Button wakes the phone bug (what a fight!)
- Added USB Fastcharge
- Recompiled with Linaro
1.2.4
- Added advanced USB Fastcharge
- RAM optimization
- ExFAT support
1.2.5
- Perflock removed (bye bye, not gonna miss you)
- Wake gestures refined (more sensitive and now is possible to set sweep vibration)
Downloads :
in attachments
zImage_XXX: if you want to play with your own boot.img repacking
boot1_XXX.img: just flash it with fastboot: fastboot flash boot bootXXX.img
Don't forget to make a Nandroid backup before installing
Credits :
@xXminiWHOOPERxX - I really learned many things just exploring your kernel source code, 'twas a big inspiration for me.
@flar2 - You made a fantastic job with your Sweep2wake, Doubletap2wake & Wake Gestures.
@show-p1984 - You made a fantastic job with your Sweep2wake project and with your Ville perflock hack.
@Matrix}{ - For your competence.
To anybody who wants to start by himself to add wake gestures to a kernel I sugget to look at this Matri}{ commit:
AddWakeGestures
It's a perfect track for any beginner
Wake gestures support
You can manage them with Sense 6 Toolbox or Wake Gestures, both are Xposed Framework modules and Mr. Google will help you to find them.
GPU Governor & Overclock
At this point init.d support is a must, stock roms don't have it, I used "Universal init.d Support" from the market and it made its job to add the support.
To set the GPU max clock freq use the following lines in an init.d script (could be /etc/init.d/99bootGPU with 755 permissions)
Code:
echo XXXXXXXXX > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk;
chmod 444 /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/max_gpuclk;
Values for XXXXXXXX are:
585000000 558000000 531000000 504000000 490500000 477000000 450000000 409500000 320000000 200000000 128000000
To set the governor use the following line:
echo "governortype" > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/pwrscale/trustzone/governor;
Values for "governortype" are:
simple
ondemand
performance
powersave
Let's test and feed back to me.
CPU Overclock & more CPU min. frequencies
Ok, this is a minefield, so I must be clear:
We are playing with Krait 300 CPU frequencies and voltage, apply these changes only if you have experience on this matter at your own risk and responsibility, I'm not responsible about any damage at your phone.
I added 2 overfrequencies:
1998 Mhz
2106 Mhz
and 4 minum frequencies:
81 Mhz
135 Mhz
189 Mhz
270 Mhz
You can set these values with SetCPU or 3C CPU Manager
System seem stable, but please test and feed back to me.
>1.2.2 shows a sensible performance improvement
SmartassV2 & Lulzactive CPU governors
You can set these values with SetCPU or 3C CPU Manager
Advanced USB Fast charge
There are two settings to play with in /sys/kernel/fast_charge/
- force_fast_charge:
0 - disabled (default)
1 - substitute AC to USB unconditional
2 - custom
- fast_charge_level
values to set are: 500 700 900 1100 1300 1500 (mA)
use an init.d script, I don't know if there are APKs who can manage these settings.
ExFAT
It's managed as module, so use it only if you need.
1) Copy exfat.ko in /system/lib/modules
2) Change permission in 664
3) add this line in your favourite init.d script: insmod /system/lib/modules/exfat.ko
My Antutu score
Reserved
thank you for sharing I test as soon
Envoyé de mon HTC One M9 en utilisant Tapatalk
Can work smoothly on insertcoins 7.0.7. Bravo new dev!
One thing found, compass not working under insert coins 7.0.7 rom.
dioooi said:
One thing found, compass not working under insert coins 7.0.7 rom.
Click to expand...
Click to collapse
Yep, and that's why Mini's Kernel has the same problem in stock ROM, different drivers between ROM and kernel.
If you agree I could try to share .ko modules compiled with kernel, to replace the ones in IC 7.0.7., just to try.
I'll do it soon.
Edit:
Ok, here are the modules, just unzip, push to /system/lib/modules and set permissions.
If 'twill work I'll add them to main post.
Thanks.
Slán!
foggydew88 said:
Yep, and that's why Mini's Kernel has the same problem in stock ROM, different drivers between ROM and kernel.
If you agree I could try to share .ko modules compiled with kernel, to replace the ones in IC 7.0.7., just to try.
I'll do it soon.
Slán!
Click to expand...
Click to collapse
Sure no harm to try!
Seems to work fine for me with stock modules.
Rom base 5.16.709.3 Sense 7 and Wake Gestures by @flar2
hi foggydew88,
any idea to add the GPU overclock option? can i just copy n paste from the elementalX GPU setting (build.config) into mini's kernel or your kernel? any corruption will happen?
shiropetto said:
hi foggydew88,
any idea to add the GPU overclock option? can i just copy n paste from the elementalX GPU setting (build.config) into mini's kernel or your kernel? any corruption will happen?
Click to expand...
Click to collapse
Reference to GPU I don't know, but for CPU oc there's to play with some driver under cpufreq and mach-msm, I'm still in research stage but 'twill be my next step, our phone is quite fast enough, but I would like the see its limit.
Slán!
Sent from my HTC Butterfly s
foggydew88 said:
Reference to GPU I don't know, but for CPU oc there's to play with some driver under cpufreq and mach-msm, I'm still in research stage but 'twill be my next step, our phone is quite fast enough, but I would like the see its limit.
Slán!
Sent from my HTC Butterfly s
Click to expand...
Click to collapse
For CPU overclock, stock speed best for me. Only GPU is my consideration. Because I playing some HD games between butterfly S n Note2 and found that graphic speed smoothly n better than butterfly S (check the spec between note2 n butterfly S, of coz butterfly S better). But, My Butterfly S playing any games also lag. Donno y...
Sent from my HTC Butterfly s using xda premium
You're right, I will check.
Added in the to do list
Sent from my HTC Butterfly s
hi foggydew88,
does this kernel support FAT32 or exfat?
shiropetto said:
hi foggydew88,
does this kernel support FAT32 or exfat?
Click to expand...
Click to collapse
FAT32 supported, exfat as module, as HTC standard defconfig.
when I press the back button not slide yet ,901e wake up, why? stock 5.0.2 rom use gp kernal. Button panel locks to s2w after this distance -> http://forum.xda-developers.com/showthread.php?t=2662415 I also have one x ,and flash the kernal ,there' no problem,i need to slide to second button,then the device wake up . Thanks for your effort to this kernal!!
kimi996 said:
when I press the back button not slide yet ,901e wake up, why? stock 5.0.2 rom use gp kernal. Button panel locks to s2w after this distance -> http://forum.xda-developers.com/showthread.php?t=2662415 I also have one x ,and flash the kernal ,there' no problem,i need to slide to second button,then the device wake up . Thanks for your effort to this kernal!!
Click to expand...
Click to collapse
In think it could be logo2wake related, the wake gestures driver that I used in this kernel is M7 derived, I will check.
Slàn.
kimi996 said:
when I press the back button not slide yet ,901e wake up, why? stock 5.0.2 rom use gp kernal. Button panel locks to s2w after this distance -> http://forum.xda-developers.com/showthread.php?t=2662415 I also have one x ,and flash the kernal ,there' no problem,i need to slide to second button,then the device wake up . Thanks for your effort to this kernal!!
Click to expand...
Click to collapse
I tried to solve this little annoying bug phishing lot of codes, from M7 (old versions too) bug remains, from OneX as you suggested code is too different (at least for my knowledge) and touchscreen wont work after code insertion.
Sorry but at this moment I spent too many time on it and no solution, but all the rest of wake gestures seems to work fine and I found no other bugs yet.
If someone has some idea or input on it I will be glad to restart to work on it, but now I will start to work on todo list.
Cheers.
Anyway, thanks for your help!!
Please fix bright screen when pressing the back button
Very strange, but installing v1.2.2 to 7.0.7 IC, phone on butanimation does not start ...
This kernel is made based on @bauner's CM 12.1 NightOwl ROM, LineageOS 13 with a few changes,. Originally based on my preference in what features I want added, I thought the rest of the Note 1 users might benefit from a bit more variety on his projects.
Just flash the kernel and you're done, make sure you're on the latest ROMs by bauner. As always, I'm not responsible if you brick your device due to some freak accident.
What's new:
V3
Merged kernel patches from bauner's commits
Redo some optimisation flags
V2
Did some optimisations
Tweak Interactive codes
Fix possible memory leaks
Please refer to my commits for more detailed info
V1.5
Set Westwood as TCP default
V1
Set Interactive as the default governor
Undervolt by 50mV
13-step CPU frequency
Download links:
CM 12.1
LineageOS 13
I did not test LineageOS 13, so please have a copy of the original NightOwl kernel on standby before flashing.
Credits:
bauner for his amazing work with the Note 1
Christopher83 for those toolchains
GeeckoDev for the War Kernel r3 sources
XDA:DevDB Information
Manjuu Kernel for CM 12.1 / LineageOS 13, Kernel for the Samsung Galaxy Note GT-N7000
Contributors
AutumQueen92
Source Code: https://github.com/AngryManjuu/android_kernel_samsung_tw_n7000/tree/cm-12.1
Kernel Special Features: Compiled with GCC toolchain optimised for our CPU (ARMv7 Cortex-A9)
Version Information
Status: Stable
Current Stable Version: V3
Stable Release Date: 2017-03-17
Created 2017-02-15
Last Updated 2017-03-21
Some kernel tweaks you might like:
Download Kernel Adiutor Mod since it's easier for this.
Set governor as Interactive and in CPU Governor Tunables, add according to this screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The target loads do not need to make a new line, one spacing for each of them is the way it is written.
For example, write it as: 95 200000:60 300000:33 and so on.
For better multitasking:
I'm getting lags on MM, too. Might just "upgrade" back to LP and give your kennel a try...
may i ask where the download link is ?
dreamteam said:
may i ask where the download link is ?
Click to expand...
Click to collapse
At the top, there is a tab for downloads.
AutumQueen92 said:
At the top, there is a tab for downloads.
Click to expand...
Click to collapse
???
Must be blind...
temporarium said:
???
Must be blind...
Click to expand...
Click to collapse
You can see it in the attached image
bauner said:
You can see it in the attached image
Click to expand...
Click to collapse
So I can't download it using the XDA Labs app? Ok. Will use a browser....
Could you add some more CPU Governor in the future releases?
surVfate said:
Could you add some more CPU Governor in the future releases?
Click to expand...
Click to collapse
It depends. What governor, where is the commit for it, what makes it so special.
Updated to V2, refer to my commits for detailed changed/additions
AutumQueen92 said:
Updated to V2, refer to my commits for detailed changed/additions
Click to expand...
Click to collapse
Hi AutumQueen92,
I would like to ask you a few questions, if you don't mind...
- Have you tried a Forest-LP kernel ?
- If „Yes“, what is the difference between those two... ?
- Is your kernel overclocked ?
- What is your experience between those three kernels when you compare them (Bauner's, Forest-LP and your own) ?
- Don't be too polite and then not to write about your kernel too... [emoji2]
Thanks in advance.
Cheers ! [emoji481] [emoji481]
Sent from my GT-N7000 using XDA-Developers Legacy app
Oh my, double posting is amazing
Boombastical said:
Hi AutumQueen92,
I would like to ask you a few questions, if you don't mind...
- Have you tried a Forest-LP kernel ?
- If „Yes“, what is the difference between those two... ?
- Is your kernel overclocked ?
- What is your experience between those three kernels (Bauner's, Forest-LP and your own) ?
- Don't be too polite and then not to write about your kernel too... [emoji2]
Thanks in advance.
Cheers ! [emoji481] [emoji481]
Sent from my GT-N7000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
1. Yeah I've tried it.
2. If you mean this kernel and his, we both used different toolchains (compilers). I'm not sure what UberTC does but the one I used is made to optimise the Note's CPU itself so it works better. But then Forest's kernel has some kind of overclocked display panel, I'm not sure what that is. It's been a long time since I used his kernel so mine is more updated since it's based on Bauner's.
3. Nope, I don't want overclock. Apps these days are made for quad-core CPUs, so overclock will do nothing except hurt your hardware.
4. I haven't been using Forest's kernel very long, I preferred War kernel or Bauner's stock kernel better. By combining those two to make mine, I feel that it's faster now although I want to do a longer usage without rebooting. Lately I've been rebooting a lot to stabilise the kernel and make some fixes, but the first usage is already showing good results. I'm trying to implement my custom tweaks, if I can't embed it into the kernel I'll post a small section for it in next month's update. Right now battery usage is about the same but better performance.
5. ??? You mean I should post a more detailed explanation about the kernel?
AutumQueen92 said:
1. Yeah I've tried it.
2. If you mean this kernel and his, we both used different toolchains (compilers). I'm not sure what UberTC does but the one I used is made to optimise the Note's CPU itself so it works better. But then Forest's kernel has some kind of overclocked display panel, I'm not sure what that is. It's been a long time since I used his kernel so mine is more updated since it's based on Bauner's.
3. Nope, I don't want overclock. Apps these days are made for quad-core CPUs, so overclock will do nothing except hurt your hardware.
4. I haven't been using Forest's kernel very long, I preferred War kernel or Bauner's stock kernel better. By combining those two to make mine, I feel that it's faster now although I want to do a longer usage without rebooting. Lately I've been rebooting a lot to stabilise the kernel and make some fixes, but the first usage is already showing good results. I'm trying to implement my custom tweaks, if I can't embed it into the kernel I'll post a small section for it in next month's update. Right now battery usage is about the same but better performance.
5. ??? You mean I should post a more detailed explanation about the kernel?
Click to expand...
Click to collapse
No, thanks !
Everything is clear now !
I already have downloaded your kernel last week and I'm gonna flash it now, cause I'm already few months using Forest-LP OC kernel and it is very stable kernel ... With no „reboots“ at all...
I'll report my experience after few weeks with your kernel...
Thanks again for explaining your work. [emoji106]
Sent from my GT-N7000 using XDA-Developers Legacy app
Boombastical said:
No, thanks !
Everything is clear now !
I already have downloaded your kernel last week and I'm gonna flash it now, cause I'm already few months using Forest-LP OC kernel and it is very stable kernel ... With no „reboots“ at all...
I'll report my experience after few weeks with your kernel...
Thanks again for explaining your work. [emoji106]
Sent from my GT-N7000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
After less than a day of using your kernel I'm amazed with working of it, but I use „performance“ governor and it works great. How difficult for you is to OC this one to 1,6 GHz ?
Sent from my GT-N7000 using XDA-Developers Legacy app
Boombastical said:
After less than a day of using your kernel I'm amazed with working of it, but I use „performance“ governor and it works great. How difficult for you is to OC this one to 1,6 GHz ?
Sent from my GT-N7000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
That's very hard to believe because performance governor just clocks your CPU at max frequency the entire time. Also very impossible, I don't want OC on the Note 1. If you want it so badly you can try building your own kernel and adding it.
Boombastical said:
After less than a day of using your kernel I'm amazed with working of it, but I use „performance“ governor and it works great. How difficult for you is to OC this one to 1,6 GHz ?
Sent from my GT-N7000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
The performance governor is not a good idea.
As @AutumQueen92 said it will run the cpu at the highest clock all the time.
After a very short time it will reach the thermal throttling temperature and then it will constantly switch between 800 and 1400Mhz
You can see it with this app
https://play.google.com/store/apps/details?id=com.yanyan.cputemp
Using V1 right now and it is very stable, should I flash the V2? Also one more thing is it possible to tweak the minimum brightness value to 1 without changing the source value and rebuild the whole kernel afterward? Thanks!
bauner said:
The performance governor is not a good idea.
As @AutumQueen92 said it will run the cpu at the highest clock all the time.
After a very short time it will reach the thermal throttling temperature and then it will constantly switch between 800 and 1400Mhz
You can see it with this app
https://play.google.com/store/apps/details?id=com.yanyan.cputemp
Click to expand...
Click to collapse
I know that thermal throttling is something what can be a problem but I have monitoring app which show me all the time what is a current temperature of processor and untill now I have no problem at all except that battery life is half of what it should be normaly...
Actually, when I wrote last post I was on „Ineractive“ governor and now I use „Performance“ governor and „cfq“ scheduler with 256 kb „read ahead“ value on the internal memory and also on the SD card. So I'll update you how far I will be satisfied with this combo. In the next few weeks I also will flash new from the scratch again your LP rom and again test it with your kernel and then again with Forest LP kernel and then at least with this one kernel...
Sent from my GT-N7000 using XDA-Developers Legacy app