DISCLAIMER: I'M NOT RESPONSIBLE IF YOU DAMAGE YOUR DEVICE...BE SURE TO BACKUP AS ALWAYS!
CWM FLASHABLE STOCK NEEDS TESTERS SO PLEASE BEWARE!!
Here is the latest firmware stock JB 4.1.2 rom(no changes made) for the 7.7 in Odin tar format(as well as a deodexed flashable zip which should work with any MD3 firmware)...after installation u will need to re-install root(use "framaroot" apk provided below for one-click root), busybox & xposed if needed. I have also added a CWM flashable version (performs a full wipe so please be aware) BUT we need testers to install & report...thx in advance
Odin Instructions(all needed files are located below)
1. Flash "MD3 STOCK" with Odin
2. Install CWM or TWRP recovery with Odin
3. Flash "M3D DEODEXED" in recovery
4. Root or re-root with framaroot app (open app, click "Aragorn", reboot, & you're done...yes its actually that easy!)
CWM Instructions(all needed files are located below)
1. Install CWM or TWRP recovery with Odin (files must be unzipped first)
3. Flash "MD3 CWM" in recovery
4. Root or re-root with framaroot app (open app, click "Aragorn", reboot, & you're done...yes its actually that easy!)
https://docs.google.com/file/d/0B7yxeu9x48ILUjBqazZsbjl2SkE/edit?usp=sharing
^P6800 MD3 ODIN
https://docs.google.com/file/d/0B7yxeu9x48ILTXpXbGtNZVNVc3M/edit?usp=sharing
^P6800 MD3 DEODEXED(use after above)
link removed until someone tests new zip
^P6800 MD3 CWM(full-wipe stock deodexed)
View attachment cwm-6.0.3.0-p6800.tar
^P6800 CWM
View attachment twrp-2.6.0.0-p6800.tar
^P6800 TWRP
View attachment 2090163
^ODIN3
View attachment 2090115
^FRAMAROOT (one-click root)
credits/thanks to @daniel_hk (recoveries) @alephzain (root)
I applause for your efforts..
Just for clarification, what is it? 4.1.2. JB Stock Rom? Any modification made?
sas_sas said:
I applause for your efforts..
Just for clarification, what is it? 4.1.2. JB Stock Rom? Any modification made?
Click to expand...
Click to collapse
All of the info is in the title
[ROM][GT-P6800][JB 4.1.2][Stock MD3][Official Odin][CWM Flashable]
nothing added or removed
Cwm full wipe means I lose all my apps but keep my files (music photos)?
EJ
Sent from my GT-P6800 using Tapatalk 2
efjbdejong said:
Cwm full wipe means I lose all my apps but keep my files (music photos)?
EJ
Sent from my GT-P6800 using Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my Nexus 4 using Tapatalk 2
Can I just flash it over my paranoid jb rom?
Sent from my GT-P6800 using Tapatalk 2
HELP!
please help!!!!!!!!
I installed via ODIN. Now I get into a bootlopp.
What Am I supposed to do now?
EJ
efjbdejong said:
please help!!!!!!!!
I installed via ODIN. Now I get into a bootlopp.
What Am I supposed to do now?
EJ
Click to expand...
Click to collapse
What you are supposed to do is search and follow simple instructions noobified for people like yourself to follow.
Sent from my Galaxy Nexus using xda app-developers app
Can i flash this straight from ics 4.0.4 custom rom without upgrade to jellybean (4.1.2) stock rom first?....
Tq.
Sent from my GT-P6800 using xda premium
Follow the OP's instructions.
google problem
hi, thanks for your great work
but 1 have a problem, i cannot dl from google docs server! :S
not sure whats wrong, but can u upload JB 4.1.2 CWM version, some place else?
thanks again
Hi, I'm testing CWM zip, flashed, booted, but everything FC, can't pass welcome screen because they FC when press 'start'.
Just powered off, will wait you response before use Odin ver.
Want anything from here to test/debug?
Sent from my Galaxy Nexus using Tapatalk 4 Beta
And they erased my internal sdcard... =/
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Fixed stock zip WITHOUT full wipe
Edwrib said:
And they erased my internal sdcard... =/
Sent from my Galaxy Nexus using Tapatalk 4 Beta
Click to expand...
Click to collapse
sorry that your sdcard got erased but full-wipe DOES in fact include the internal sd card...i have uploaded a new version that has the data format removed and hopefully fixes the force closes if anyone is willing to test it for me
https://docs.google.com/file/d/0B7yxeu9x48ILMmQ0d3F0ZV9ZeGs/edit?usp=sharing
^STOCK CWM FIXED?
Any chance this could be made for the GT-P6810 7.7 version?
Sent from my Nexus 4 using xda premium
IT might be compatible if and when Samsung release JB for 6810
efjbdejong said:
please help!!!!!!!!
I installed via ODIN. Now I get into a bootlopp.
What Am I supposed to do now?
EJ
Click to expand...
Click to collapse
I had the same issue. Turns out it was because I had other rom installed before (non official). A simple factory reset (wipe from CWM) fixed the problem.
Hey guys
Please help me out
All i need is 4.1.2's keyboard and i cain't find it anywhere
Could u please just gimme its apk like?
THEDEVIOUS1 said:
DISCLAIMER: I'M NOT RESPONSIBLE IF YOU DAMAGE YOUR DEVICE...BE SURE TO BACKUP AS ALWAYS!
CWM FLASHABLE STOCK NEEDS TESTERS SO PLEASE BEWARE!!
Here is the latest firmware stock JB 4.1.2 rom(no changes made) for the 7.7 in Odin tar format(as well as a deodexed flashable zip which should work with any MD3 firmware)...after installation u will need to re-install root(use "framaroot" apk provided below for one-click root), busybox & xposed if needed. I have also added a CWM flashable version (performs a full wipe so please be aware) BUT we need testers to install & report...thx in advance
Odin Instructions(all needed files are located below)
1. Flash "MD3 STOCK" with Odin
2. Install CWM or TWRP recovery with Odin
3. Flash "M3D DEODEXED" in recovery
4. Root or re-root with framaroot app (open app, click "Aragorn", reboot, & you're done...yes its actually that easy!)
CWM Instructions(all needed files are located below)
1. Install CWM or TWRP recovery with Odin (files must be unzipped first)
3. Flash "MD3 CWM" in recovery
4. Root or re-root with framaroot app (open app, click "Aragorn", reboot, & you're done...yes its actually that easy!)
https://docs.google.com/file/d/0B7yxeu9x48ILUjBqazZsbjl2SkE/edit?usp=sharing
^P6800 MD3 ODIN
https://docs.google.com/file/d/0B7yxeu9x48ILTXpXbGtNZVNVc3M/edit?usp=sharing
^P6800 MD3 DEODEXED(use after above)
link removed until someone tests new zip
^P6800 MD3 CWM(full-wipe stock deodexed)
View attachment 2109898
^P6800 CWM
View attachment 2109899
^P6800 TWRP
View attachment 2090163
^ODIN3
View attachment 2090115
^FRAMAROOT (one-click root)
credits/thanks to @daniel_hk (recoveries) @alephzain (root)
Click to expand...
Click to collapse
Ok i have the verizon I815 ..i dont care about the 3g really i dont i just want this bad boy updated and want to know can i flash this onto it?..also and if it is ok to flash this do i need root? because i also dont care about that i want this thing as stable as possible. and does samsung apps work?? geez because it doesnt work for crap right now and this thing is brand new never been touched.
Tbbo514 said:
Ok i have the verizon I815 ..i dont care about the 3g really i dont i just want this bad boy updated and want to know can i flash this onto it?..also and if it is ok to flash this do i need root? because i also dont care about that i want this thing as stable as possible. and does samsung apps work?? geez because it doesnt work for crap right now and this thing is brand new never been touched.
Click to expand...
Click to collapse
As the thread title and instructions indicate, this is for P6800 only....
If you try, you will inevitably BRICK your device.
If you wish to try a JB ROM, daniel_hk has built a custom ROMs here for I815 :
http://forum.xda-developers.com/showthread.php?t=2139747
and here :
http://forum.xda-developers.com/showthread.php?t=2330651
I personally don't use them on my P6810 (I like Samsung TW), and may have a few bugs, but he has made excellent effort.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Related
This a totally stock 2.3.4 rom that has only been deodexed. Flash in CWR. Please flash correct version!
-Rom: GRJ22 Deodexed
-Radio NS: XXKD1
-Radio NS4G: SPRKD8
-Does not wipe Data
-Wipes Dalvik-Cache
-Not rooted/ rooted, Busybox, insecure boot.img, init.d scripts support
-Zipaligned apk's & jar's
-Preserves CWR
-Google Talk video fully working outgoing/incoming
-Latest Google Apps
-Tested on: I9020T, I9020A, I9023, D720
Extras: (Flash after flashing Rom, compatible with all versions)
Enables Facebook Sync in contacts: Facebookfix.zip
NS GSM - (I9020T, I9020A, I9023):
Not Rooted:
Link 1: NSGSM-GRJ22-deodexed-KD1.zip (102.3 MB) md5sum: d6aacb12c5a44ffd8b96c9bd1dc00fa1
Link 2: NSGSM-GRJ22-deodexed-KD1.zip
Rooted/Busybox/insecure boot.img/init.d Script support:
Link 1: NSGSM-GRJ22-deodexed-KD1-rooted.zip (108.53 MB) md5sum: 970e9c7252f12a38ecaa6ff77ef6d010
Link 2: NSGSM-GRJ22-deodexed-KD1-rooted.zip
NS4G Sprint - (D720):
Not Rooted:
Link 1: NS4G-GRJ22-deodexed-KD8.zip (103.75 MB) md5sum: f3ca2ad207a698fe11c9b6aef39588fc
Link 2: NS4G-GRJ22-deodexed-KD8.zip
Rooted/Busybox/insecure boot.img/init.d Script support:
Link 1: NS4G-GRJ22-deodexed-KD8-rooted.zip (110.07 MB) md5sum: 8a1b47b4063486613283f8d4bad592ff
Link 2: NS4G-GRJ22-deodexed-KD8-rooted.zip
To root go here: http://forum.xda-developers.com/showthread.php?t=682828 and flash su-2.3.6.1-ef-signed.zip in CWR after you flash the rom.
Suggested Custom Kernels:
Jame Bond by ogdobber http://forum.xda-developers.com/showthread.php?t=949292
Netarchy Nexus by netarchy http://forum.xda-developers.com/showthread.php?t=936219
Matr1x by mathkid95 http://forum.xda-developers.com/showthread.php?t=1100448
Thank me if you like this rom.
Eamon
Hmm, actually, I still can't figure out what exactly deodexed means.
I heard I can apply theme on deodexed rom. Is this all?
iamxeph said:
Hmm, actually, I still can't figure out what exactly deodexed means.
I heard I can apply theme on deodexed rom. Is this all?
Click to expand...
Click to collapse
It's a bit faster D
iamxeph said:
Hmm, actually, I still can't figure out what exactly deodexed means.
I heard I can apply theme on deodexed rom. Is this all?
Click to expand...
Click to collapse
not default icons also theme .
Up and running!
thx for this...
up and running. i just realized how easy to root it. after flashing it, still in recovery, install superuser back.... reboot, superuser and root access is there. use root explorer, find install.recovery.sh, rename it.. and recovery will stay there also..
Netarchy kernel applied successfully.
flashed on i9023 and bricked
even cant get into "download" mode
EDIT: gonna homemade JIG to fix it :/
lyfkevin said:
flashed on i9023 and bricked
even cant get into "download" mode
EDIT: gonna homemade JIG to fix it :/
Click to expand...
Click to collapse
Can you report back what happens with you.
Sent from my Nexus S using XDA Premium App
hrm does this mean it's only for 9020 models?
I have a 9023 and I'd like to give 2.3.4 a quick spin but I don't feel like returning to stock (possibly with odin to be sure) and then using an OTA etc etc etc
flashed on my 9020a. everything good, thanks for posting.
however one thing, I removed the bootloader.img and edited the script....possibly the problem with 9023 user?
(also flashed jame bond kernel)
lyfkevin said:
flashed on i9023 and bricked
even cant get into "download" mode
EDIT: gonna homemade JIG to fix it :/
Click to expand...
Click to collapse
Can you explain me how to fix it. I think my nexus s is bricked
aix said:
Can you explain me how to fix it. I think my nexus s is bricked
Click to expand...
Click to collapse
Likewise
tried this on a 9020a and bricked it.
I'm going to remove the bootloader.img from the Rom cause it's giving i9023 users trouble. In the mean time if you wanna flash on something other than i9020T, remove the bootloader.img from the zip and edit the last part of the update-script that references installing the bootloader.
Sent from my Nexus S using XDA Premium App
Is it possible to use deodexed systemUI.apk from this rom on stock odexed 2.3.4 rom?
fear2142 said:
Is it possible to use deodexed systemUI.apk from this rom on stock odexed 2.3.4 rom?
Click to expand...
Click to collapse
No you can't, it'll just bootloop your phone. Any apk that comes with an odex file cant be replaced.
Sent from my Nexus S using XDA Premium App
Updated Rom to work with non-I9020T models, sorry for the trouble the first link caused.
keep getting status 7 install aborted error...
FaithCry said:
keep getting status 7 install aborted error...
Click to expand...
Click to collapse
Try re-downloading or check the md5sum to make sure the download is not corrupted, I just tested it and it flashed okay.
Downloading this from Google Docs seems to yield a bad file every single time. On my 5th download now, every one before has been bad. They get to between 70 and 90mb and then think they've finished.
Any chance you could upload somewhere more reliable?
it is recommended to start from a clean installation by installing the firmware LC1 with odin Mobile
INSTALLATION
insert zip in internal sd card
flash with CWC
IMAGES PASSION RED
IMAGES ARTIC GREY
GRAPHIC CHANGES
launcher
contact
phone
mms
setting
digital clock
clock package
e altre piccole mod
CHANGELOG
XXLC1 - 22.03.2012
NOWIPE (credit criskelo update script)
MODEM N7000XXLb2
ITV (MultiCSC)
KERNEL abyss 4.2
Deodexex
Zipaligned systen/apk and data/apk
Root + Busybox 1.19
data mode nel quickpanel
% BATTERY
twlauncher 6 icon + 6x6 grid+ 9 home
sconcauteam wallpaper black
minor mod
delete unnecessary applications samsung
mms hack
DOWNLOAD
Wow this looks great, dw now!
is a little work than others, but created with my knowledge
and this makes me proud to present
Installation aborts at zimage. Tried two times. No go
Wow looks great love the red look,
Rigby2011 said:
Installation aborts at zimage. Tried two times. No go
Click to expand...
Click to collapse
I have to check.
kernel that you had before?
Franco new source, could install kingdroid after tried yours and that went ok.
Link is death
mirrors? link dead...error i get...This file, folder or group is private or does not exist.
phankhi said:
mirrors? link dead...error i get...This file, folder or group is private or does not exist.
Click to expand...
Click to collapse
He is fixing the zip because it aborts installation.
let's try abyss .. upload file
I do not understand what I have installed everything yesterday with CF and worked perfectly .. now does not work ..
I have now installed and working with abyss
Give me a confirmation
so flash it through mobil odin? now its booting?
pglmro said:
let's try abyss .. upload file
I do not understand what I have installed everything yesterday with CF and worked perfectly .. now does not work ..
I have now installed and working with abyss
Give me a confirmation
Click to expand...
Click to collapse
Had same issue in my rom mate cf would not work all others did
Sent from my GT-N7000 using xda premium
not odin mobile .. with CWM
thering1975 said:
Had same issue in my rom mate cf would not work all others did
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I'm not good with English.
I did not understand what you mean
pglmro said:
I'm not good with English.
I did not understand what you mean
Click to expand...
Click to collapse
He means that in his ROM has the same problem with the same kernel.
This kernel doesn't working properly with every custom ROM...
Sent from my GT-N7000 using Tapatalk 2 Beta-2
Is it working now?
PS : I am getting an error 400 message at 99% says the 'url validity time exceeded' message.
I reloaded the rom and changed the link if you want to try again
now available as an artic grey
same link
Tried to install as described in op - LC1 installed fine via mobile odin. Reboot was ok and LC1 boots up completely. Restarted into CMW and installed passion red Rom. Also fine, but stuck on boot loop after reboot - tried it several times - also with deleting all kinds of caches. Got always a boot loop. Any suggestions?
Ok guys, a few have asked for a stock deodexed rom, so here it is. It is rooted and has SuperSu and the necessary binaries to make it work correctly. Other than that, it is stock from the T210R MG4 firmware.
November updated T210RXARAMK1 version is HERE. This version does not wipe data (only cache and dalvik).
October updated T210RXARAMJ1 version is HERE. This version does not wipe data (only cache and dalvik).
How to install:
1. Download the rom zip from HERE (older MG4 version).
2. Boot into your custom recovery (CWM, Philz Touch or TWRP). Look for those threads in this dev section if you don't have this already.
3. Make a backup of your current rom.
4. Do a Factory Reset, and cache/dalvik cache wipe in recovery.
5. Flash the rom zip.
6. Reboot. Enjoy.
I did not spend a great deal of time running this stock rom, so please report any issues.
IMPORTANT NOTE FOR PHILZ TOUCH RECOVERY USERS: On the "Install Zip" page, scroll down and UN-CHECK the "Don't allow old update-binary" option before trying to install.
Thanks to @Jamison904 (whose update script I used for reference).
To fix the Calculator force close issue, download and flash the attached Calculator_fix.zip.
The Camera and Gallery fix zip located HERE is only required for those who downloaded before 7:30 EST Sept 20.
Bluetooth Fix
If you are experiencing trouble enabling bluetooth, perform the steps below:
Using a file browser on your phone, open the /data/misc/bluethoothhd folder. Make sure you open the "bluetoothhd" folder and not the "bluetooth" one. There should be one folder in that directory. Delete that folder. Then try to turn on bluetooth. It should work.
One More
Thank you very much this is exactly what I need .
Sent from my SGH-T999 using xda app-developers app
Outstanding!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Looks like the camera is force closing, I'll take a look to see if I can figure that out.
EDIT: Got it fixed. Seems it didn't deodex properly. Uploading a flashable fix now to the OP and will re-upload the whole rom soon.
EDIT 2: Link updated with fixed version.
Gallery is closing as well. Using T210
IX_XI said:
Gallery is closing as well. Using T210
Click to expand...
Click to collapse
Thanks for the report. I have created a flashable fix for this. The link is at the bottom of the OP.
EDIT: Link for full rom updated in OP as well with fixed version.
>>>>------;;;;----->
on wich stock firmware is this rom based? are german region settings/system language available?
daSn00p said:
on wich stock firmware is this rom based? are german region settings/system language available?
Click to expand...
Click to collapse
As stated in the OP, it is based on T210R MG4 firmware. T210R is the US version. I do not see German in the language list.
gr8nole said:
As stated in the OP, it is based on T210R MG4 firmware. T210R is the US version. I do not see German in the language list.
Click to expand...
Click to collapse
ah my fault didnt read that.
hmm so i still have to wait until somebody does it with an european/german fw...
Nc work gr8nole hope u can make it bloatfree
Sent from my SM-T210R using xda app-developers app
I'm sorry if this a noob question... since this is a "stock" ROM. Do the factory samsung updates work? In other words when Samsung releases an update, can I update it or will it detect I am using a custom ROM?
AceNJ said:
I'm sorry if this a noob question... since this is a "stock" ROM. Do the factory samsung updates work? In other words when Samsung releases an update, can I update it or will it detect I am using a custom ROM?
Click to expand...
Click to collapse
Probably not going to get any ota updates. But if you did, it most likely wouldn't flash correctly anyway. Most updates like that will check for any modified system files and these are modified (deodexed and root).
Sent from my DROID RAZR MAXX HD
OP updated with new version.
Sent from my DROID RAZR MAXX HD
gr8nole said:
OP updated with new version.
Sent from my DROID RAZR MAXX HD
Click to expand...
Click to collapse
Let you know how it goes - downloading - have to find another another micro-sd card...
Got error could not flash
Sent from my DROID RAZR HD using Tapatalk 2
krazyace35 said:
Got error could not flash
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
What error did you get? Maybe a bad download. MD5 is listed on download page.
gr8nole said:
What error did you get? Maybe a bad download. MD5 is listed on download page.
Click to expand...
Click to collapse
Error while flashing Oct.2013.stock.rooted.drodexed.T210RXARAMJ1
Sent from my DROID RAZR HD using Tapatalk 2
krazyace35 said:
Error while flashing Oct.2013.stock.rooted.drodexed.T210RXARAMJ1
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
md5 match?
Hi I've created a prerooted firmware using PRFcreator by @zxz0O0
everything seems to work fine, I have root access (tested with root checker)
How to install: take a back up of your current rom just in case
1-Download the flashable.zip
2-Go to recovery (I have used cwm) wipe data,cache and dalvick cache.
3-Flash the zip
4-Press thanks here and here http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
note: if you are coming from cm,pa,etc,etc do a clean installation.
Download: http://www.mediafire.com/download/bi7k5cvkytmywzk/flashable.zip
Mirror Google drive:
https://drive.google.com/file/d/0BzU4mk6kPBNDU0M3Q2x4ZXlkM28/edit?usp=sharing
Screenshots:::
Settings/ Android 4.4.4
root access;
-THIS ROM IS NOT DEODEXED
-THIS ROM IS THE STOCK ONE, WILL WORK ON BOTH LOCKED AND UNLOCKED BOOTLOADER
-ONLY PRE-ROOTED MEANS NO RECOVERY
HOW TO DEODEX
--------to deodexed the rom flash this zip through recovery, I made it using kamome tool:
note:Working perfectly (L
Dl: http://www.mediafire.com/download/j3lqjsu44iwqdhz/deodex_install.zip
Note: after deodexing the rom you will need to flash the supersu again: http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip
Super user mod:http://www.mediafire.com/download/qxtnlt75zg7dope/SuperuserMod4.4.4.zip flash through recovery or simple extract and move to system/framework and set permissions rw-r-r
How to install a recovery:
Download this, unzip in your local disc and run the .bat
Download: http://nut.xperia-files.com/downloa...lY292ZXJ5Mi43LjE1NC1CRVRBLmluc3RhbGxlci56aXA=
-you must be rooted
-usb debugging on
What are the changes or is it like the .233 update?
Jodus said:
What are the changes or is it like the .233 update?
Click to expand...
Click to collapse
http://www.gsmarena.com/android_444_for_xperia_z_zr_zl_tablet_z_now_official-news-9593.php
Jodus said:
What are the changes or is it like the .233 update?
Click to expand...
Click to collapse
This is 4.4.4 update. I really didn't test yet, but it seems to be very smooth, no lag at all and camera has been improved pictures are very clear not blurry like in the 4.4.2 update. can't tell you about the battery yet but feel free to ask and I'll test
rom has a recovery?
This firmware is only pre-rooted or include recovery yet?
kris555777 said:
rom has a recovery?
Click to expand...
Click to collapse
lusifer84 said:
This firmware is only pre-rooted or include recovery yet?
Click to expand...
Click to collapse
only pre-rooted
Slow download. Try to upload it to other serwer like google drive
just a flashable zip? no ftf? thats so cool.thanks.btw download speed is fine...
i'm using PA !! what shall i do ? just flash this zip ? and i'm ready to go mate ?
Zewarxx said:
i'm using PA !! what shall i do ? just flash this zip ? and i'm ready to go mate ?
Click to expand...
Click to collapse
yes just flash, everything is included in the zip
thanks !! works fine !~! amazing
this room have this issu:
Earphone not working during calls?
works in LB?
is the rom Deodexed?
hectorfgd said:
works in LB?
Click to expand...
Click to collapse
It will work on both LB/UB but you need a working recovery for this
@Pablosch23 can you edit the tread name with [LB/UB] ?
sekac55 said:
It will work on both LB/UB but you need a working recovery for this
@Pablosch23 can you edit the tread name with [LB/UB] ?
Click to expand...
Click to collapse
Thanks mate, yes I have installed
#SosVenezuelaXperiaZc6603
glückspilz said:
is the rom Deodexed?
Click to expand...
Click to collapse
Yeap
Sent from my C6603 using XDA Free mobile app
lusifer84 said:
this room have this issu:
Earphone not working during calls?
Click to expand...
Click to collapse
mine works fine.
I haven't found a problem yet, although the battery doesn't seem any better. Still getting a lot of drain from Play Services
Zewarxx said:
Yeap
Sent from my C6603 using XDA Free mobile app
Click to expand...
Click to collapse
No it's not
Hello Mates. I just changed my mind on building stock based ROM(s) & I recently worked with cm12 and this is my first build. Sadly I haven't tested much bugs yet as my device is trashed, but the ROM is boot-able(tested it on my friend's phone).
Note:
Your warranty will be void.
Also I/CyanogenMod are not responsible if the device(by any chance) is bricked.
Follow the steps below for correct installations(for people who're installing AOSP for the first time).
The sample theme that you see in the screenshot is S5 theme & can be installed from play store.
So this is pure CM12 ROM with no additional customization. You can checkout some screenshots. And kindly make sure these requirements are met:
Code:
1: You must have the latest recovery installed.
2. Make sure you're on 4.2.2/AOSP based ROM that runs on 4.2.2 bootloader.
3. Before installing the ROM please reset the device to factory default.
4. If the three steps above are met then proceed to "Procedure to install:" part.
Few things I've noted are:
1. Camera doesn't FC.
2. The sound doesn't crack while playing music.
3. Applying any theme changes the complete SystemUI.
4. Problems while connecting as UMS like the PC doesn't recognize the device & the device stops reading media/other files on SD.
5. Tiny lag at times.
6. At times some GApps may stop responding/force closes.
Click to expand...
Click to collapse
Links:
ROM(PZAndROM v4):
Android File Host.
GApps v5.0.x:
BasketBuild.
AFH
Procedure To Install:
1. Reboot to recovery.
2. Clear the entire ROM/RESET to factory default.
[OPTIONAL STEP]:Clear cache & dalvik/art cache.
3. Install the ROM.
4. Flash GApps.
5. Reboot.
Click to expand...
Click to collapse
Last Year's Build Features:
CF-Rooted.
S5 UI.
Xperia Z3 Walkman.
ViperFX.
S5 File Manager.
Custom Bootanimation Support.
Quick boot.
Ultra Power Saving Mode Launcher.
Removed Bloatwares.
Mi Ringtones, Notifications and Alarm tones.
BelleUI Icons.
Holo Launcher HD.
Keep.
WPS Office.
Click to expand...
Click to collapse
Before posting any error/query either before installing or after installing please make sure you've read the following:
1. You should be on any AOSP(w/ 4.2.2 BootLoader) or Stock-4.2.2 ROM.
2. You'll need an updated custom recovery.
3. Before installing do not forget to reset the device.
4. If any bug is found please do report I'll make a fix for it ASAP.
5. If it's about UI designing/icon designing, I'll be doing it if & only if I get free time so don't take it seriously guys :highfive:.
6. If you have any error I need a complete report about your device, example:
Code:
1. Device Model(Since it works even with other grand variants):
2. Recovery used:
3. Recovery Version:
4. Previous ROM Name:
5. Any kernel mods installed: Yes or No
6. a) Any other mod installed: Yes or No
b) If any other mod is installed provide it's details:
8. If anything outside this note occurs you're free to post your feedback :good:
Click to expand...
Click to collapse
HyDroid ROM v3: Last Year's Update
Any other bug please report when the ROM is available.[/SIZE]
Thanks to the following members for their help...
Code:
1. Pawitp for the Source codes & patches.
2. K2wl for Source codes.
3. Jackeagle & team for the guide.
Click to expand...
Click to collapse
I've stopped the ROM development due to lack of time and also I've switched to a new device.
Screenshots Of v3 ROM:
Occupied again...
First of all i apreciate to u for this rom.can I install through any cwm version on grand.sorry for my bad English
Sent from my GT-I9082 using XDA Premium 4 mobile app
Yes you can install it via any recovery. In Philz recovery you'll get a msg that the rom is using legacy property evnvironment. You can avoid it and installation would proceed.
Sent from my GT-I9082 using XDA Premium 4 mobile app
Great work.....Thanks dev.....installed just now....everything went fine.....will use for few days and come back and post if any issues......
rmrajm1 said:
Great work.....Thanks dev.....installed just now....everything went fine.....will use for few days and come back and post if any issues......
Click to expand...
Click to collapse
Any time mate.
Tried installing through multiple recoveries but got stuck Samsung 19082 boot logo every time.
Mahz4130 said:
Tried installing through multiple recoveries but got stuck Samsung 19082 boot logo every time.
Click to expand...
Click to collapse
Did you do factory reset & wipe dalvik cache before installing?
PaletroxZ said:
Did you do factory reset & wipe dalvik cache before installing?
Click to expand...
Click to collapse
Yes.
Mahz4130 said:
Yes.
Click to expand...
Click to collapse
Mate tell me which android version did you have previously i.e before installing this rom, is it 4.1.2 or 4.2.2? If on 4.1.2 you'll have to update it to 4.2.2 via odin and then install the recovery and proceed with the rom installation my friend.
Mahz4130 said:
Tried installing through multiple recoveries but got stuck Samsung 19082 boot logo every time.
Click to expand...
Click to collapse
Are u on 4.2.2??!
I had the same issue of getting stuck on samsung grand i9082 screen. did factory/data wipe. i was initially on PA. then even flashed it from liquid smooth and aogp. but no luck.
Sent from my GT-I9082
Nice ROM.
All who tried to install this ROM need to install 4.2.2 Stock ROM then flash CWM and then Install This ROM for error-less installation.
karipari95 said:
I had the same issue of getting stuck on samsung grand i9082 screen. did factory/data wipe. i was initially on PA. then even flashed it from liquid smooth and aogp. but no luck.
Sent from my GT-I9082
Click to expand...
Click to collapse
Try out philz recovery mate. Choose the "Clean to Install New ROM" option. Then try flashing it.
Is there ultra power saving mode in this rom as in S5 ?
PaletroxZ said:
Try out philz recovery mate. Choose the "Clean to Install New ROM" option. Then try flashing it.
Click to expand...
Click to collapse
i have philz recovery. but i guess hemant suggested the right method to do it.:thumbup:
Sent from my GT-I9082 using XDA Free mobile app
Mr. 23 said:
Is there ultra power saving mode in this rom as in S5 ?
Click to expand...
Click to collapse
Yes the rom has an UPSM Launcher from S5 which can be used to reduce battery drain when your battery low.
karipari95 said:
i have philz recovery. but i guess hemant suggested the right method to do it.:thumbup:
Sent from my GT-I9082 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks You.:laugh::laugh::laugh::laugh:
PaletroxZ said:
Mate tell me which android version did you have previously i.e before installing this rom, is it 4.1.2 or 4.2.2? If on 4.1.2 you'll have to update it to 4.2.2 via odin and then install the recovery and proceed with the rom installation my friend.
Click to expand...
Click to collapse
CM 11 4.4.4 with 4.2.2 bootloader.