Database Develop

Have New LG 47LA6200 Smart TV, SIMPLINK ON, AUTO POWER ON & Cc can't turn TV ON

Ok guys, I need some help. I have a brand new 2013 LG LA6200 Smart TV. HDMI-CEC (SIMPLINK) on the LG is turned on and so is SIMPLINK Auto Power is set to on. I have the Chromecast dongle powered from the USB power supply rather than the TV USB port. Here is the problem. When the TV is off and I select Chromecast Google Play movie to be cast, I thought Chromecast was supposed to turn ON the TV and flip to the right input and start playing. However the TV never turns on. It is just sitting there turned off. However if I manually turn it on, the correct input is selected and the movie is streaming. So... how does Chromecast is supposed to automatically turn the TV on?? Cause in my setup it ain't happening. Any help will be greatly appreciated. BTW, is there a Google Chromecast place to post questions like that? Thanks.

larryvand said:
Ok guys, I need some help. I have a brand new 2013 LG LA6200 Smart TV. HDMI-CEC (SIMPLINK) on the LG is turned on and so is SIMPLINK Auto Power is set to on. I have the Chromecast dongle powered from the USB power supply rather than the TV USB port. Here is the problem. When the TV is off and I select Chromecast Google Play movie to be cast, I thought Chromecast was supposed to turn ON the TV and flip to the right input and start playing. However the TV never turns on. It is just sitting there turned off. However if I manually turn it on, the correct input is selected and the movie is streaming. So... how does Chromecast is supposed to automatically turn the TV on?? Cause in my setup it ain't happening. Any help will be greatly appreciated. BTW, is there a Google Chromecast place to post questions like that? Thanks.
Click to expand...
Click to collapse
You're not the only one. I have a 2013 LG TV (LN5700) and auto power does not work. Same setup as you-- Inputs are correctly switched but the darn display won't turn on.
I'm not sure whether the problem is with the Chromecast itself or the display as I don't have any other HDMI-CEC devices to test with.

I have an LG LM4700, and my AVR with CEC control never turned on/off my tv, but my tv would turn my AVR on/off.
I read on a forum post somewhere (take with a grain of salt) that LG didn't fully implement the full HDMI-CEC spec with SIMPLINK.

SkitchBeatz said:
You're not the only one. I have a 2013 LG TV (LN5700) and auto power does not work. Same setup as you-- Inputs are correctly switched but the darn display won't turn on.
I'm not sure whether the problem is with the Chromecast itself or the display as I don't have any other HDMI-CEC devices to test with.
Click to expand...
Click to collapse
I also have an LG BP530 a Blu-Ray player which also has Simplink (HDMI-CEC). With both the TV and the Blu-Ray player OFF, pushing the front play button of the Blu-Ray player, turns the blu-player ON, turns the TV ON, switches to the right input and plays the DVD. In other words the Simplink (HDMI-CEC) protocol as implemented by LG for all their LG devices WORKS.
I'm thinking that HDMI-CEC may be a "standard" but every OEM has only tested their implementation with their own stuff. That is why each OEM uses a different name (Anynet+, bravia link/sync, simplink, Ratga link, etc...) instead of HDMI-CEC. I bet if you put the HDMI signal through a scope and try to isolate the control signals you will find that from each OEM they are just a tad different (maybe a bit longer pulse..).
Google could fix this in firmware of course but they will have to test for each brand individually and in the end possibly they will have to have an option to select the type of TV the user has for the differences in HDMI-CEC implementations. Either that or each OEM will have to update their sets to more correctly adhere to the standard.

This is why I never put much faith in HDMI CEC when I use to install home theaters and media rooms. It always led to inconsistent operation with some devices working and others not. I would always turn that feature off and program a universal remote for the customer.
At least it is switching inputs for you, though. That to me is the most important. Are you mainly using a phone/tablet for chromecast or a PC? If mainly using your phone/tablet, you could use LG's app to turn on the TV before casting. I know it is not ideal, but unfortunately HDMI CEC was a standard but all manufacturers implemented it differently. There is currently no way for chromecast to work the way it was demoed to work across all manufacturers' TVs.
EDIT: Some ray of light is that LG is a hardware partner with Google. Chromecast support might get pushed to your current TV and/or Blu-ray which would solve your problems. If nothing else, I suspect LG to come out with a new Blu-ray player that supports Chromecast.
EDIT 2: I forgot that LG's network protocol does not support turning "on" the TV or Blu-ray so using LG's app will not help you.

In fact I have 3 Chromecasts (for our 3 TVs) and the Chromecast input switching works so well on the LG that I hooked all 3 on the LG and I was able to cast from Chrome at will to one at a time and they would automatically switch to the correct input on each and every time. Now if they can fix the Auto Power ON I will be all set. I also think that LG and Google have a good relationship so they can hopefully work out who will update what (Chromecast or the LG TV) to fix this. I certainly will continue bothering them both (Google and LG) till they fix the issue.

larryvand said:
Ok guys, I need some help. I have a brand new 2013 LG LA6200 Smart TV. HDMI-CEC (SIMPLINK) on the LG is turned on and so is SIMPLINK Auto Power is set to on. I have the Chromecast dongle powered from the USB power supply rather than the TV USB port. Here is the problem. When the TV is off and I select Chromecast Google Play movie to be cast, I thought Chromecast was supposed to turn ON the TV and flip to the right input and start playing. However the TV never turns on. It is just sitting there turned off. However if I manually turn it on, the correct input is selected and the movie is streaming. So... how does Chromecast is supposed to automatically turn the TV on?? Cause in my setup it ain't happening. Any help will be greatly appreciated. BTW, is there a Google Chromecast place to post questions like that? Thanks.
Click to expand...
Click to collapse
Read link below to solve your problem.
http://forum.xda-developers.com/showpost.php?p=44248801&postcount=4

xuser said:
Read link below to solve your problem.
http://forum.xda-developers.com/showpost.php?p=44248801&postcount=4
Click to expand...
Click to collapse
Sorry but no dice. Simplink settings: Simplink ON, Auto Power ON. The TV recognizes the 3 Chromecasts plugged into the 3 HDMI inputs with the Simplink logo on the input TV screen, but it refuses to allow them to turn the TV on. All 3 are powered with the external power brick. However, once the TV is manually turned on, the Chromecasts do switch to the correct input when something is cast to them. So as far as the 2013 LG model 47/50/55LA6200 is concerned, the only issue is that Chromecast will not turn the TV ON even though the Auto Power setting of Simplink (LG speak for HDMI-CEC) is on.
Either Chromecast or LG need to update the firmware for their devices, as I have said before the LG Blu-Ray player with Simplink does not have that problem and is able to turn the TV on just fine.

Placeholder for HDMI-CEC
http://www.quantumdata.com/pdf/CEC_White_Paper.pdf

Just got Chromecast on Monday - some issues encountered so far

The setup was fine, connected to my network, played Netflix and Youtube from various devices (phone, laptop, computer) no problems! (Interested in the Plex thread and others on here for locally stored video.. )
What is happening is very strange, however. I have a TV with multiple inputs (typical these days, right?) but after I've been 'casting' to the Chromecast, it takes several tries to change away from that input to another input (my Xbox, or HD antenna).
ALSO - the TV powers itself ON after a while! WHY IS THAT? I left and came back home and thought I had left the TV on - which is not like me at all! And later that night it turned on AGAIN after I went to bed. I unplugged the Chromecast just to get it to stop, but ideally, I would want to leave it plugged in all the time.
What is making the TV turn on?
Will moving my TV input to anything other than the Chromecast port stop it?
Is there a soft power-off option for the Chromecast device?

FractalSphere said:
The setup was fine, connected to my network, played Netflix and Youtube from various devices (phone, laptop, computer) no problems! (Interested in the Plex thread and others on here for locally stored video.. )
What is happening is very strange, however. I have a TV with multiple inputs (typical these days, right?) but after I've been 'casting' to the Chromecast, it takes several tries to change away from that input to another input (my Xbox, or HD antenna).
ALSO - the TV powers itself ON after a while! WHY IS THAT? I left and came back home and thought I had left the TV on - which is not like me at all! And later that night it turned on AGAIN after I went to bed. I unplugged the Chromecast just to get it to stop, but ideally, I would want to leave it plugged in all the time.
What is making the TV turn on?
Will moving my TV input to anything other than the Chromecast port stop it?
Is there a soft power-off option for the Chromecast device?
Click to expand...
Click to collapse
Sounds like you're having issues with their chrome cast's HDMI CEC. It can be used to automatically change inputs to the one the chrome cast is using and even turn on tvs.
You could disable HDMI control for your TV and it would prevent the issues from occurring.
Every manufacturer has a different name for their HDMI Control feature.
Who makes your tv, OP?

FractalSphere said:
The setup was fine, connected to my network, played Netflix and Youtube from various devices (phone, laptop, computer) no problems! (Interested in the Plex thread and others on here for locally stored video.. )
What is happening is very strange, however. I have a TV with multiple inputs (typical these days, right?) but after I've been 'casting' to the Chromecast, it takes several tries to change away from that input to another input (my Xbox, or HD antenna).
ALSO - the TV powers itself ON after a while! WHY IS THAT? I left and came back home and thought I had left the TV on - which is not like me at all! And later that night it turned on AGAIN after I went to bed. I unplugged the Chromecast just to get it to stop, but ideally, I would want to leave it plugged in all the time.
What is making the TV turn on?
Will moving my TV input to anything other than the Chromecast port stop it?
Is there a soft power-off option for the Chromecast device?
Click to expand...
Click to collapse
I would suggest to just unplug the USB when not in use if your TV is turning on, I know my brothers TV its a westinghouse turns on anytime something connected to it turns on like the xbox or ps3 or laptop

not so good to know. hope its fixed soon

Andrmgic said:
Sounds like you're having issues with their chrome cast's HDMI CEC. It can be used to automatically change inputs to the one the chrome cast is using and even turn on tvs.
You could disable HDMI control for your TV and it would prevent the issues from occurring.
Every manufacturer has a different name for their HDMI Control feature.
Who makes your tv, OP?
Click to expand...
Click to collapse
It's a Toshiba flat-screen, don't know the model. I'll put more detail up tonight when I can look. :silly: I also need to try having it off the Chromecast and starting a session and seeing if it draws the TV to that input. THAT would be nice, but the auto-powering on is a bad bug in my opinion.

My TV turns on automatically when just about anything powers on before the tv is on. Say I turn my ps3 on 1st, it will turn it on. Or plug a USB Flash drive in, turns it on. But, once in the HDMI spot, I can shut it down and it stays off. Very strange.
Sent from my SGH-T889 using Tapatalk 4 Beta

Chromecast keeps turning my tv on

I have one TV in my house (Toshiba 55HT1U) that keeps getting turned on by the Chromecast. I turn the TV off, and then with a few minutes, the TV will be back on again. Unplug the Chromecast, and the TV stays off. I have tried multiple Chromecasts with the same results, I disabled Regza Link (Toshiba's HDMI-CEC), and it still keeps happening. This also happens whether the Chromecast is connected to my TV or to the receiver which is then connected to the TV. I have read where this particular TV suffers from this issue with other devices, but I wish there was a way to turn it off from the Chromecast end.
Right now, my solution is to go and unplug the Chromecast when I am not using it...hardly an elegant solution.

Have you check the manufacture website of your TV. I know some TV within the last few years, if it have a USB hook up, you can typically update the TV Firmware it may solve your problem. Just a shot in the dark. Also Chromecast is also getting an update.
jumpmanjay said:
I have one TV in my house (Toshiba 55HT1U) that keeps getting turned on by the Chromecast. I turn the TV off, and then with a few minutes, the TV will be back on again. Unplug the Chromecast, and the TV stays off. I have tried multiple Chromecasts with the same results, I disabled Regza Link (Toshiba's HDMI-CEC), and it still keeps happening. This also happens whether the Chromecast is connected to my TV or to the receiver which is then connected to the TV. I have read where this particular TV suffers from this issue with other devices, but I wish there was a way to turn it off from the Chromecast end.
Right now, my solution is to go and unplug the Chromecast when I am not using it...hardly an elegant solution.
Click to expand...
Click to collapse

GreenDroidX said:
Have you check the manufacture website of your TV. I know some TV within the last few years, if it have a USB hook up, you can typically update the TV Firmware it may solve your problem. Just a shot in the dark. Also Chromecast is also getting an update.
Click to expand...
Click to collapse
I have seen where some people have tried the update and it made no difference, but I will definitely try this when I get home tonight.

Find your HDMI-CEC options (whatever Toshiba calls it) and turn on HDMI-CEC but turn off Auto power. That will allow HDMI-CEC to switch to the right input but will not allow the HDMI-CEC to auto power the TV.

I have the exact same problem with a Toshiba 46G300U1 so let me know if you find a solution. It seems like a bunch of the Toshiba's all have this problem and I doubt Toshiba is going to fix it. I've tried various different kinds of options (connecting the Chromecast through a cable, a HDMI switch etc.). As long as the Chromecast is switched on and connected to the TV it always turns on automatically. Obviously disabling HDMI-CEC doesnt seem to help. I suspect there is a bug in the Toshiba that still keeps acting on HDMI-CEC signalsI am planning to file a support case with Chromecast as they are more likely to fix the problem (maybe an option to disable CEC on the Chromecast) than Toshiba. But since that is unlikely I am thinking maybe I can try a cable that doesnt properly support HDMI-CEC. It seems CEC is a separate wire and there are lots of people online complaining about cables that don't support CEC.

Try not powering your device via USB from the TV. (If you are) My LG TV seems to have issues with CEC from devices that get power from it via USB. Does weird stuff like this

So I tried updating the firmware on my TV...they said just put the new firmware on a USB stick, then plug the stick into the TV and it will automatically prompt you to start the install. Well, it didn't. I tried 2 different USB sticks with no success.
My "fix" was to just power the Chromecast WITH the USB port on the TV. That way the Chromecast is off when the TV is, so it won't try to turn it back on.

Great idea. I am connecting my USB cable to the TV's USB port for now. I might try connecting the Chromecast via my audio receiver later on. FWIW the firmware update did nothing to solve the issue on my TV.

I don't want to disable CEC on my TV, because I'd still like to have the CEC capability to turn on/off my home theatre automatically along with the TV. I can use USB power from the TV to power my Chromecast, but once the TV is on, my home theatre mutes automatically because it gives up control of CEC to chromecast. It's an unfortunate software decision made by Sony, the maker of my home theatre. I want the home theatre speakers to stay active, but Sony has programmed it to mute when another device on the same HDMI bus takes CEC control.
If you don't want your Chromecast to be a CEC-control device, meaning you don't want it turning your set on at all, or you don't want it overriding other CEC devices, just order lindy-usa.com part number 711110-1, which is a HDMI CEC Less Adapter, Female to Male, and put it inline with your Chromecast. It disables the CEC sense line from your Chromecast to your TV. Problem solved. Neall

Cast to receiver, but audio stops if attached TV powered off

My Chromecast is plugged into an HDMI input on my home theater receiver (Yamaha RX-V673) and powered externally from the wall. The HDMI output goes to my TV (6-yr old Samsung LNT4042H). I am streaming a browser tab (playing Grooveshark audio) to my home theater. Everything works fine, but I don't want to leave my TV on since I'm only listening to music. But when I turn the TV off, the audio stops too. Very perplexing, I'm not even sure whether or not to blame the Chromecast or the receiver, but I'm leaning toward the former (still no clue how to fix it though).
Any ideas? Thanks!

Weird. Dotés the TV INPUT to the hometheater ?
Sent from my X506-3G using xda app-developers app

grosmouton said:
Weird. Dotés the TV INPUT to the hometheater ?
Sent from my X506-3G using xda app-developers app
Click to expand...
Click to collapse
No. Weirder still, if the TV is already off when I start casting, it will cast successfully for a little while, but eventually the audio will cut out. If I then turn TV on, audio will come back.

The111 said:
My Chromecast is plugged into an HDMI input on my home theater receiver (Yamaha RX-V673) and powered externally from the wall. The HDMI output goes to my TV (6-yr old Samsung LNT4042H). I am streaming a browser tab (playing Grooveshark audio) to my home theater. Everything works fine, but I don't want to leave my TV on since I'm only listening to music. But when I turn the TV off, the audio stops too. Very perplexing, I'm not even sure whether or not to blame the Chromecast or the receiver, but I'm leaning toward the former (still no clue how to fix it though).
Any ideas? Thanks!
Click to expand...
Click to collapse
Do you have the USB plugged into the TV??
Sent from my Eclipsed Galaxy S4

mjdavis871 said:
Do you have the USB plugged into the TV??
Sent from my Eclipsed Galaxy S4
Click to expand...
Click to collapse
Nope, powered externally from wall as mentioned in OP. Although admittedly I did add that in an edit so even though you quoted it, perhaps you read before I added it. :angel:
Another weird observation... if I put my TV to another input, it works fine. This is almost a perfect workaround since if I put TV to a dead input, it is almost as good as being powered off. Not quite though.

The111 said:
Nope, powered externally from wall as mentioned in OP. Although admittedly I did add that in an edit so even though you quoted it, perhaps you read before I added it. :angel:
Another weird observation... if I put my TV to another input, it works fine. This is almost a perfect workaround since if I put TV to a dead input, it is almost as good as being powered off. Not quite though.
Click to expand...
Click to collapse
Sounds like either your receiver is "noticing" that the TV is off and going into some power save or something (check for input detection or options on a particular input), or your TV is doing the audio decode and feeding it back to your receiver via Audio Return Channel (ARC).
The latter is less likely simply because you get some audio at the start when the TV is off.
I tried looking in your receiver's manual, but it seems pretty complex (and powerful).
This page will let you download the manual without registering for a Yamaha account:
http://download.yamaha.com/search/product/?category_id1=16445&product_id=1645661

mjdavis871 said:
Do you have the USB plugged into the TV??
Sent from my Eclipsed Galaxy S4
Click to expand...
Click to collapse
bhiga said:
Sounds like either your receiver is "noticing" that the TV is off and going into some power save or something (check for input detection or options on a particular input), or your TV is doing the audio decode and feeding it back to your receiver via Audio Return Channel (ARC).
The latter is less likely simply because you get some audio at the start when the TV is off.
I tried looking in your receiver's manual, but it seems pretty complex (and powerful).
This page will let you download the manual without registering for a Yamaha account:
http://download.yamaha.com/search/product/?category_id1=16445&product_id=1645661
Click to expand...
Click to collapse
It does seem to be the receiver at fault, since I've tested and it happens with other HDMI sources. Went through the entire manual and tried changing every option that seemed like it might be related... no luck. Will continue my search elsewhere since this does not seem to be Chromecast related. Thanks anyway. :good:

The111 said:
It does seem to be the receiver at fault, since I've tested and it happens with other HDMI sources. Went through the entire manual and tried changing every option that seemed like it might be related... no luck. Will continue my search elsewhere since this does not seem to be Chromecast related. Thanks anyway. :good:
Click to expand...
Click to collapse
Probably something that can keep the HDMI connection alive, like Dr. HDMI or HDMI Detective might work, though I'd see about borrowing or trying one before spending money on it if possible.
Sent from a device with no keyboard. Please forgive typos, they may not be my own.

bhiga said:
Probably something that can keep the HDMI connection alive, like Dr. HDMI or HDMI Detective might work, though I'd see about borrowing or trying one before spending money on it if possible.
Sent from a device with no keyboard. Please forgive typos, they may not be my own.
Click to expand...
Click to collapse
Maybe that would work, but so does the complete opposite (killing the connection 100%). I've found that if I totally unplug my TV, then it works fine. The problem is that when the TV is "off" it is actually in standby mode which must still draw some power, and the receiver is aware of this via the HDMI connection, and for some dumb reason chooses to stop the audio stream because of it. If I unplug the TV, then the receiver loses awareness of it entirely and decides to play the audio again. Very stupid, but solvable for $10:
www.amazon.com/Woods-Extension-Switch-Remote-15-Feet/dp/B000KKND86/
I currently manually push the TV power button to turn it off... now I just have to use that button instead to totally cut it off from power.
I believe the receiver is to blame... but easier to spend $10 than try to make Yamaha fix a problem.

The111 said:
If I unplug the TV, then the receiver loses awareness of it entirely and decides to play the audio again. Very stupid, but solvable for $10:
www.amazon.com/Woods-Extension-Switch-Remote-15-Feet/dp/B000KKND86/
I currently manually push the TV power button to turn it off... now I just have to use that button instead to totally cut it off from power.
I believe the receiver is to blame... but easier to spend $10 than try to make Yamaha fix a problem.
Click to expand...
Click to collapse
If you can find an IR-triggered power cut off and you have a learning remote, you may be able to teach one of your remote buttons the signal and avoid getting up (yeah, I'm lazy).
Reminds me of the joke "if you lend someone $20 and never see them again, it might be $20 well spent."
Sent from a device with no keyboard. Please forgive typos, they may not be my own.

This is a very LONG SHOT and most likely NOT the problem...
But with most Amp to TV setups the Amp requires the TV to be on to get it's HDCP validation as the amp merely acts as a passthrough device.
Like I said it is a longshot but it is possible that some services may require HDCP to operate....
More likely though it is CEC sending a shutdown signal to the amp.
Or the Amp is timing out because it believes the Chromecast is a Video device and requires a monitor regardless of the fact that the Chromecast can do Audio Only as well.
The Amp itself really has no clue what is plugged into it...All it knows is HDMI gets sent to a Monitor and in your case it doesn't have a destination so shuts itself off.

Asphyx said:
The Amp itself really has no clue what is plugged into it...All it knows is HDMI gets sent to a Monitor and in your case it doesn't have a destination so shuts itself off.
Click to expand...
Click to collapse
The fact that totally cutting the power to the TV (at the wall) fixes everything would seem to disprove that statement (and the earlier one that HDCP from the TV might be required for it to work). But I really don't know for sure.

It could *possibly* be HDMI CEC messing with it.

death2all110 said:
It could *possibly* be HDMI CEC messing with it.
Click to expand...
Click to collapse
Yep!
Because Pulling the plug means no CEC command gets sent!
Thats what it is!

Asphyx said:
death2all110 said:
It could *possibly* be HDMI CEC messing with it.
Click to expand...
Click to collapse
Yep!
Because Pulling the plug means no CEC command gets sent!
Thats what it is!
Click to expand...
Click to collapse
Interesting. This CEC is new to me. I wonder how long it's been around... my TV (and the connecting cable) is from 2007.
No options in TV or Receiver anywhere to disable it, although the receiver specs do say that it has CEC. If it is CEC causing my issue, I wonder if something like this might help?
http://www.pulse-eight.com/store/products/110-cec-less-hdmi-cable.aspx
Of course it's only a foot long so I'd need a F-F connector to tack it onto the end of my existing cable.

The111 said:
Interesting. This CEC is new to me. I wonder how long it's been around... my TV (and the connecting cable) is from 2007.
No options in TV or Receiver anywhere to disable it, although the receiver specs do say that it has CEC. If it is CEC causing my issue, I wonder if something like this might help?
http://www.pulse-eight.com/store/products/110-cec-less-hdmi-cable.aspx
Of course it's only a foot long so I'd need a F-F connector to tack it onto the end of my existing cable.
Click to expand...
Click to collapse
CEC = Consumer Electronic Control
It's meant to help with the IR control and switching of inputs on Consumer devices
It was Introduced with the HDMI 1.2a Spec and expanded when HDMI 1.3 came out.
It's basically a control network for all the devices in a Home Entertainment system. Your supposed to be able to use one Remote to control everything....Works in Theory but most people have no clue how to get it to work! LOL
If you set your TV to your TUNER it should tell the Amp to switch to the Optical TV input automatically. And when you select BlueRay that goes through the amp the Amp should switch to that input and automatically change the input on the TV to see the Amp.
That Cable probably lifts pin 13 from connecting (isn't wired) which would take a particular device off the CEC Network.
But I would check both the Amp and TV settings first because by adding that cable you will have to switch inputs if you use the tuner on the TV and not just a set top box.If everything you own and watch goes through the amp the cable won't cost you any functionality other than TV remote working to change volume on the amp.
EDIT I don't suggest getting a Female to Female connector to barrel two cables together...
Better to get an extension HDMI cable that has a Female to Male cause every connector and connection can add noise and kill signal quality.

I have a opposite problem, chromecast keeps turning my TV on My Chromecast is connected to my Yamaha RX-A830 and I have a Samsung E8000 with 2013 Evolution kit. Every time I start playback on Chromecast, the TV is turned on. If I turn the TV off, the playback continues, but after some time (seems random to me) it turns the TV on again. Maybe that's when the playback stops for you? Because your TV does not support CEC and Chromecast thinks that there is no need to play anymore?

poisike said:
I have a opposite problem, chromecast keeps turning my TV on My Chromecast is connected to my Yamaha RX-A830 and I have a Samsung E8000 with 2013 Evolution kit. Every time I start playback on Chromecast, the TV is turned on. If I turn the TV off, the playback continues, but after some time (seems random to me) it turns the TV on again. Maybe that's when the playback stops for you? Because your TV does not support CEC and Chromecast thinks that there is no need to play anymore?
Click to expand...
Click to collapse
Hmm, I'm pretty sure I've ruled out the Chromecast, since it happens with Wii U in the same way. But it is still possible it could be as you describe, and the exact same thing is happening with the Wii U too.

poisike said:
I have a opposite problem, chromecast keeps turning my TV on My Chromecast is connected to my Yamaha RX-A830 and I have a Samsung E8000 with 2013 Evolution kit. Every time I start playback on Chromecast, the TV is turned on.
Click to expand...
Click to collapse
That's how it's supposed to work.
If you don't want the TV turning on, you'll need to disable CEC on your TV, or if it has an option, disallow CEC power on.
poisike said:
Because your TV does not support CEC and Chromecast thinks that there is no need to play anymore?
Click to expand...
Click to collapse
Chromecast doesn't care. It's still playing as turning the TV back on results in audio.
Really sounds like Yamaha thought it would be smart for the receiver to automatically switch off if the attached display is turned off.
My Sony sound bar has an auto-off feature too that has the annoying feature of turning off if I have my TiVo paused too long, so I turned off the sound bar's auto off and turned on my TV's option to turn off attached devices when powering off.
Sent from a device with no keyboard. Please forgive typos, they may not be my own.

Wii U does not support CEC.
My TV CEC is on and Power sync is disabled. Yet still Chromecast turns it on...
Yamaha receivers turn off when they get CEC command to do so. My Chromecast has never turned my Yamaha receiver off. I have Yamaha set to HDMI control "On" and Standby sync "Auto" which should accept CEC power down command only when the current source sends it.

Chromecast stopped changing input

My Chromecast recently stopped changing the input on my TV to the HDMI input the chromecast is connected to. Casting works, but I have to manually change input.
Chromecast will turn the TV on, but will not change the input.
I am using a Sony Bravia KDL-46HX701, casting from Android 4.4, and Windows 7.
My router is an ASUS RT-AC66U.
Thanks in advance for any suggestions.

arns said:
My Chromecast recently stopped changing the input on my TV to the HDMI input the chromecast is connected to. Casting works, but I have to manually change input.
Chromecast will turn the TV on, but will not change the input.
I am using a Sony Bravia KDL-46HX701, casting from Android 4.4, and Windows 7.
My router is an ASUS RT-AC66U.
Thanks in advance for any suggestions.
Click to expand...
Click to collapse
Make sure HDMI-CEC is enabled on your TV. Refer to the manual. Could be called something else.

I have a Sony Bravia also that had the same problem. When I added a new hdmi device, it stopped the chromecast from switching inputs. I unpluged the new device (a connector for my laptop) and the chromecast switched again. Unplug all hdmi cables from tv except chromecast and see if it switches. Then add cables one at a time. That is what worked for me. I hope it works for you!

DataAndroid said:
I have a Sony Bravia also that had the same problem. When I added a new hdmi device, it stopped the chromecast from switching inputs. I unpluged the new device (a connector for my laptop) and the chromecast switched again. Unplug all hdmi cables from tv except chromecast and see if it switches. Then add cables one at a time. That is what worked for me. I hope it works for you!
Click to expand...
Click to collapse
that's it! the new cable box is interfering with the chromecast for some reason.
were you able to resolve the problem somehow, or did you just stop using the second device?

arns said:
that's it! the new cable box is interfering with the chromecast for some reason.
were you able to resolve the problem somehow, or did you just stop using the second device?
Click to expand...
Click to collapse
Typically the cable boxes hdmi ports are 'always on'. Basically the TV thinks there is always a signal there. Even when the box is off. If you have comcast and an 'X1' box those boxes never turn off even when you use the power button on the remote.

I just left the second device unplugged. I don't use it regularly. I am glad that worked!