Database Develop

[Q] Would you tell me my I9000 dead not just dying....

Thanks in advance for any response!
The followings are my phone's symthoms:
1. My phone WAS FANTASTIC until I updated new Darky extreme version 9.2 (upgrade from 9.0)
2. I degraded it to the stock rom with Ryan's OLFG -> Working very well...
3. Until the phone was restarted. The phone was still working however
4. IT BECAME FREEZING. I couldnt scroll, couldnt touch the screen, or the phone response was like 5 mins later for each touch.
5. I followed instructions on the internet to flash with stock rom (JM8) and upgraded it to JPO, and the result is
6. THE PHONE COULDNT BE BOOTED at the Galaxy logo.
7. I tried to flash the phone over and over with different stock roms using ODIN 1.3 (with well understanding about repartition and PIT)
8. NOW, my phone is still able to access the download mode, but my PC CANNT SEE THE PHONE DRIVER ANYMORE(tested on 3 other laptops with the same result)
9. Reinstall USB drivers like 20 times, the results have been the same.
TO me this should be a phone death. Im gonna purchase the new Galaxy S 2
HOWEVER, If there is anyway to revive my phone back to normal (Cuz I wanna get some important data in the internal card), I will not only send a big gratitude but some DONATE as well.
Thanks.

so you put the phone in download mode first... then you attach the USB ???
Does anything happen when your in Odin ?? does it not say connected or anything ??
and have you tried doing a factory reset in recovery mode ??
aslong as your phone can go into download mode there is still hope so dont give up on it just yet

U obv have samsung kies right?. Go on processes on ur pc ctrl alt del n kill the kiestrayagent process
Sent from my GT-I9000 using XDA App

Surely I killed KS before doing ODIN. The PC(s) said it was Unknown device.
My phone was on when android 2.1 installed (but freezing, not just lagging .... completely freezing on the home screen) and would not boot if i installed 2.2
Sigh....
Thanks for your replies

The PC(s) said it was Unknown device.
Thats generally a USB /driver/windows problem .
You installed deadlys rom and it should still be recoverable even from that .
Is your phone picked up via Kies phone/Odin will need Kies installed .
I would have flashed back to a clean copy of Eclair first off to get the phone working .
jje

Both Kies and Odin could not see my phone... I killed Kies process before doing Odin, but the result was still a sadness.

Brick or what?

Hi guys,
In my hands come SGS which cant boot up, same trouble like in this video:
http://www.youtube.com/watch?v=MsGuKUv_s2s&feature=related
but my SGS bootloopin´ this.I have instaled Kies, and shut down Kies and Kies tray agent(Only for Driver to ODIN).But it didnt work, so i have linstaled another drivers, and nothing new.Phone boot up to download mode without problems, but cant boot up to recovery.I have to try tutorial with download mode(Like with JIG) without JIG and didnt work.So what must i do to save the phone?Thanks for all answers.

Not really clear but if you can get into download mode and Odin recognizes phone then flash new firmware. But I suspect you are saying Odin isn't detecting the device.
Sent from my GT-I9100T

Buy usb jig on ebay, put it in downlaod mode and reflash some stock kernel. It should do the trick.
Sent from my GT-I9000 using XDA App

if you were flashing an ics based rom you need nexus s driver's on the PC for Odin to see your phone as the stock Samsung one is no use now.
Sent from my GT-I9000 using xda premium

I`m in trouble
Hi guys.
I can`t make my windows 7 recognize the SGS...I`ve already tried the USB_samsung drivers, even for Nexus...but the error 43 always appears.
I can turn on the phone in CWM but anything can be done, always data problems...so I only can put it on Download Mode, but I can`t download anything, the Odin doesn`t have a Comm Port communication.
I was restoring for Factory Default when it happens...I was using the MyUltimate 1.3...after I flashed the ICS RC 4.2...and now anything works.
Sorry about my English...I`m Brazilian.
I really appreciate any kind of help.

picture of my problem
I forgot to post a picture of the CWM messages...it`s attached...thanks a lot

I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?

no idea
Thompson111 said:
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
Click to expand...
Click to collapse
I have no idea...i`m reading many help option in differents Android/SGS forums, but anything is going well...
Does anybody know if doing a JIG download, like if the device was bricked wouls resolve?

[Q] can't connect SGS to pc using samsung kies

hello this is my first thread here
recently i have installed a cyanogenmod 10 on my SGS
but whet i connect my phone with PC i saw that Samsung kies didn't recognize my phone i mean no thing appear in kies window
but i can only use the phone in mass storage mod . so i'm asking if there is a way to connect SGS with PC using Kies
and there is an other thing i think it is absent in cyanogen 10 witch is the black list in call settings
sorry for my bad eng
thnx

Kies is only for Samsung ROMs, it won't work on CM10.

Yes stock
Sent from my GT-I9000 using xda premium

so im in exact situation i have cm10 and wanted to flash back stock via ODIN but it cant detect phone properly and stops on verifying platforms...
on evry pc cable and usb port.. i read somewhere that to flash odin u need kies to recognize ur phone, so how im suppose to do that?
i wanted to back to CWM (in which i have backup) but i have TWRP now and it dont want to install rar with cwm oO and i cant use odin, so what should i do........????
EDIT
it stuck again, ill try with cm9 because i remeber i could flash with odin back then

[Q] Galaxy GT-S5570 bricked?

Hello guys,
I have a Galaxy Mini where I had CM 10.1 on it. Now I tried to put original stock rom on it. I downloaded the stock rom and tried to put it on it with Odin.
At this moment, the Mini doesn't have any android on it, and I think neither a recovery.
I am able to enter Download Mode as well as Emergency Download Mode.
I have Windows 7 x64, in both modes Windows recognizes the phone and the drivers are installed well.
Odin recognizes the phone, too, in both modes (yellow), but when I try to flash it, he hangs at "Setup Connection".
Is there anyway to get the phone working again?
Thank you very much for your help!
Matthias

matze0611 said:
Hello guys,
I have a Galaxy Mini where I had CM 10.1 on it. Now I tried to put original stock rom on it. I downloaded the stock rom and tried to put it on it with Odin.
At this moment, the Mini doesn't have any android on it, and I think neither a recovery.
I am able to enter Download Mode as well as Emergency Download Mode.
I have Windows 7 x64, in both modes Windows recognizes the phone and the drivers are installed well.
Odin recognizes the phone, too, in both modes (yellow), but when I try to flash it, he hangs at "Setup Connection".
Is there anyway to get the phone working again?
Thank you very much for your help!
Matthias
Click to expand...
Click to collapse
Problem solved, I left the phone 1 day without battery, now it worked.

[Q] N7000 bricked - No USB connection possible

ok first things first, imma noob, and i did a stupid thing.
It started in last summer when i wasnt able anymore to connect the N7000 to my WIN 7 64bit (probably after an update to ICS /JB).
Well since i never needed to transfer files (64GB-sdxc) i didnt care much about it. but then in last times my phone/ram cache was full of so much unblockable bootloaded crapware so that i wanted to switch from a official 4.1.2 firmware to cyanogen. But since my USB wasnt working it wasnt that easy.
Side note: the USB-port was ****ed up before (short-circuit, screen woke up due to fake-loading). i fixed that by luck and some dark magic.. so of course i thought the connection problem were because oif the broken jack.
The day before yesterday i tried for 8 hours anything i could find to install another bootloader and flash CM (CWM / TWRP / Triangle away / minimal adb/fastboot etc.); didnt work, CWM seemed to boot up but loading failed all the time at 1/3rd of the bar at screen went black.
Yesterday my friend came over and i tried to use his USB-jack to connect my phone to my Pc, which failed. THEN i put the "broken" one from mine in his N7000; that was efficacious, everything worked fine, so the USB-jack wasnt the problem.
Later i had, out of frustration, moronism, and anger, the glorious idea to download and flash another (older) Kernel via mobile odin to install an old gingerbread stock rom on it afterwards.
That was stupid as i know now, all i can do now is enter download mode, but without USB-connectivity and the stock bootloader with the options reboot system / update from sd / wipe data / wipe cache / test redbend fota(FS) and boot, which stucks at the N7000-screen.
After i managed to **** things up i found an article which describes my (now former) USB-problem perfectly. it says to put in a special number combination on the phone to get to phoneUtil and then switch from modem mode to pda mode. i knew this screen before but i couldnt find it at the preferences on JB.
Now comes my question: What could be done to unbrick my phone? is there any help?

Can you not try another USB cable? Try cleaning out the pins and see if it works. Then flash speedmod.
Sent from my GT-N7000 using Tapatalk

backstreetboy said:
Can you not try another USB cable? Try cleaning out the pins and see if it works. Then flash speedmod.
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
>Just to clarify: with USB-Jack i mean the USB-Port with the connector to the motherboard; sorry if i misused the word
I dont think so cause we used only his cable when he was here and my phone neither connected with mine nor with his USB-Jack, but both Jacks worked on his phone.
Pro-question: Is there a difference between (usual) USB-connection in booted mode and connection in download mode? i mean is download mode something like a "safe mode" where the USB doesnt need to run on 100% availabilty? Should i try to find the phone via Odin in downdload mode again by using his cable? i dont think this could work else.

Samsung galaxy note gt-n7000 bricked. Need HELP!!
The phone shows " Firmware upgrade issue encountered an issue. Please select recovery mode in Kies & try again". I cant go to recovery mode ie. vol up+home+power. THings I have tried:
1. with Kies the device isnt recognised. I have updated the driver as well.
2. with odin every thing fails... flashing "all samsung recovery.tar", flashing stock jelly bean, flashing .pit file
I have googled for days and tried many things but isnt working. Need help