Database Develop

Epinter's CM10 on ICS + JB (Lateral Flash from RAZRHD ROM)

I was simply curious and discovered that this RAZR HD ROM works (almost perfectly!) on my AHD running ICS. I assume this should fully work for JB, because it's made for that kernel. So if you're on JB, please try it and let us know.
>> Use Safestrap SLOT-1 to flash Epinter's rom: http://www.linuxmobile.org/razrhd/cm10
If your WIFI won't turn on, replace the drivers with the correct files from here: http://forum.xda-developers.com/showthread.php?t=2107662
Developers/Coders: How do we get the sensors working on ICS?? I've tried like mad to replace with stock-ics drivers, but I really don't know what I'm doing
Enjoy the pull-down toggles & customizable soft-keys!!
[edit: attached my screenshots; everything seems to work on ICS except the sensors & gps]

no go on JB 4.1.1, stuck in boot animation for 10mins twice.

progrockguy said:
I was simply curious and discovered that this RAZR HD ROM works (almost perfectly!) on my AHD running ICS. I assume this should fully work for JB, because it's made for that kernel. So if you're on JB, please try it and let us know.
Click to expand...
Click to collapse
What do you mean by almost perfectly... what was and was not working? Im still running on ICS and would love to get cm10 on my device.

JB 4.1.1 it boots for me but I get Encryption Unsuccessful. No go.
Sent from my MB886 using xda app-developers app

I can get the JB rom to boot, but i get a message about phone not successfully encrypted and requires a reset, wiping data now to see if it will work.
(installing to rom slot using safestrap)

coldfear00 said:
no go on JB 4.1.1, stuck in boot animation for 10mins twice.
Click to expand...
Click to collapse
Can you try deleting slot1 from Boot Options and creating a new one from scratch, wipe, then re-flash (and cross your fingers).

EcHoFiiVe said:
JB 4.1.1 it boots for me but I get Encryption Unsuccessful. No go.
Click to expand...
Click to collapse
Oneofonex1 said:
I can get the JB rom to boot, but i get a message about phone not successfully encrypted and requires a reset, wiping data now to see if it will work.
Click to expand...
Click to collapse
Is this the error message you guys are talking about? Also are you flashing to a freshly wiped (cache, dalvik, sys, factory data) slot or over an existing rom (i.e. dirty and not recommended)?
forum.xda-developers.com/showthread.php?t=1580902
If that's the bug then there is a fix for it, but I didn't encounter that at all on ics.

Clean flash. I have already seen that guide but we don't have partitioning in SS.
Sent from my MB886 using xda app-developers app

Damn this encryption bug. I did not see that coming due to simply being on JB.
I saw another thread say that removing the microsd and rebooting a couple of times might get you past the error message. This isn't ideal and reinserting would probably bring it back, but if it works we could then determine if all the sensors work on JB.

Nothing works on my side either I tried reboots w/o SD and tried booting off another ROM and then installing no-go
Sent from my MB886 using xda app-developers app

progrockguy said:
Is this the error message you guys are talking about? Also are you flashing to a freshly wiped (cache, dalvik, sys, factory data) slot or over an existing rom (i.e. dirty and not recommended)?
forum.xda-developers.com/showthread.php?t=1580902
If that's the bug then there is a fix for it, but I didn't encounter that at all on ics.
Click to expand...
Click to collapse
yes, exact error message but, will the fix from work on our phones (i'm a bit skeptical and cant be the 1st to jump and find out).

Oneofonex1 said:
yes, exact error message but, will the fix from work on our phones (i'm a bit skeptical and cant be the 1st to jump and find out).
Click to expand...
Click to collapse
Yeah that solution seems impractical. I think a simpler solution would be to work around the internal "sdcard." I'd remove anything that involves mounting/reading that area (/data/media) and see if it boots up then. I took a look at Batakang's init files and I noticed that his omit the /storage lines that this CM10 includes.
But my first priorities are these two cpa exams on the 14th and 28th. I've been wasting too much time on this new phone :/

progrockguy said:
Yeah that solution seems impractical. I think a simpler solution would be to work around the internal "sdcard." I'd remove anything that involves mounting/reading that area (/data/media) and see if it boots up then. I took a look at Batakang's init files and I noticed that his omit the /storage lines that this CM10 includes.
But my first priorities are these two cpa exams on the 14th and 28th. I've been wasting too much time on this new phone :/
Click to expand...
Click to collapse
tried removing everything (except twrp folder and safestrap) from external sd, still get encryption error. I appreciate your time, i hope your exams go well. good luck

Just a question how is everything going so far guys? Keep up the good work
ATRIX HD running BATAKANG 1.10

This ROM won't boot because were using SS and not CWM or TWRP
Sent from my MB886 using xda app-developers app

What if we use whirley eyes bootmanager like the atrix 2
Sent from my MB886 using xda app-developers app

EcHoFiiVe said:
This ROM won't boot because were using SS and not CWM or TWRP
Click to expand...
Click to collapse
This boots up just fine. The ROM creator himself says it can be flashed with Safestrap: http://forum.xda-developers.com/showthread.php?t=1993888
The issue is getting past the "Encryption Unsuccessful" message for those on JB. From what I've read it's because the internal sdcard cannot fully read. (Maybe a factory reset & SD wipe via stock would help by erasing any encrypted data?)

progrockguy said:
This boots up just fine. The ROM creator himself says it can be flashed with Safestrap: http://forum.xda-developers.com/showthread.php?t=1993888
The issue is getting past the "Encryption Unsuccessful" message for those on JB. From what I've read it's because the internal sdcard cannot fully read. (Maybe a factory reset & SD wipe via stock would help by erasing any encrypted data?)
Click to expand...
Click to collapse
No. Its because we use a bootstrap recovery. I don't think its SS compatible because the Encryption Unsuccessful error only happens because of the incompatibility.
Sent from my MB886 using xda app-developers app

No Service

I just updated my ROM I was using MIUI 2.9 (I think) and I just updated it to 3.2.8. Everything on the old ROM was working except the themes, of course.
After my update I don't get service. I have bars, but no service. Do I need to do the wire trick again or am I doing something wrong? I haven't had this issue before and I don't see anyone else having this issue.
I wiped cache and davlik before the update. Should I redo the update?
Any suggestions are appreciated.
Thx

EyeGee said:
I just updated my ROM I was using MIUI 2.9 (I think) and I just updated it to 3.2.8. Everything on the old ROM was working except the themes, of course.
After my update I don't get service. I have bars, but no service. Do I need to do the wire trick again or am I doing something wrong? I haven't had this issue before and I don't see anyone else having this issue.
I wiped cache and davlik before the update. Should I redo the update?
Any suggestions are appreciated.
Thx
Click to expand...
Click to collapse
try a full wipe and reflash

XxSHaDoWxSLaYeRxX said:
try a full wipe and reflash
Click to expand...
Click to collapse
I did that. Still nothing. I did notice that I my APN disappeared. I have now done a factory reset. See if that will bring me back. I tried manually adding the APN but it wont save.

Try flashing another ROM. Also verify your imei is still in the settings. Factory reset won't help as it just deletes data/sdcard
Sent from my HTC Holiday using Tapatalk 2

Why did you flash 3.2.8? Flash the newest version. One version had an APN bug for some reason
Sent from my One X using Tapatalk 2

ZeRo2o9 said:
Why did you flash 3.2.8? Flash the newest version. One version had an APN bug for some reason
Sent from my One X using Tapatalk 2
Click to expand...
Click to collapse
I flashed 3.2.8 bc I thought that was the newest version. I guess I found the APN bug. hahahaha.
In either case I appreciate yalls help. I just went with a different ROM I went with the PAC MAN ROM but now I'm having an issue with it reading my SD Card. I'm wondering if it's the gapps file I downloaded. hmmm.. idk.
This thread can be closed if necessary.

Mistake updating cyanogenmod...

Hello guys,
I had my Tab P1 running CM 10.1 nighties, and this morning I mistakenly update directly to cm 11 nighties
It boots, but I continuously receive errors on phone app and I can only reboot.
What can I do ? Could you help me with a step by step guide ? What I need to install first from the recovery mode ? I tried to revert to my last nightie but I receive an error....
Thanks!
Sent from my Transformer Prime TF201 using XDA Premium HD app

Give more information about the error, please.

I had my p1000 running last cyanogenmod 10.1 nightie, I downloaded the first cyanogenmod 11, and then I installed it.
First boot: com.android.phone continously crashing.
Downloaded Google apps, installed from sd, rebooted, everything seems to work fine until I tried to use play store (crashed).
Full wipe, installed again last nightie, Google apps and now at startup setting application crashes repeatedly...
What should I do?
Thank you for your answer!!
sorry for late answer, busy days!
Sent from my GT-N7100 using XDA Premium HD app

another error I receive is in clockworkmod recovery:
E: error in cache/recovery/log no space left on the device
and E: error in cache/recovery/last log no space left on the device
Sent from my GT-N7100 using XDA Premium HD app

I think the only thing will help you is restock.
I have another error, but my situation is very similar to yours.
Reflashing of any CM11 or CM10.2 ROM did not help me.
Restoring of 3 working backups (1 KitKat and 2 JB) did not help me, too.

I have some thoughts about our errors.
Similar errors occur on the different CM ROM's, so I came to the conclusion that something is wrong in the p1-common source files.

Same problems here.
CM11 install goes fine, after installing gapps I have a lot of problems, apps close, freeze...
I switched back to cm10, no other choice at this time.
Oh, for the ones that having problems getting the P1000 back to life again.
I re-stocked the P1000 to 2.3.6 with repartition (included the .pit file).
After that I flashed the Overcome kernel (wich contains CWM and root).
I cleared all caches, Dalvik, etc.
After that I flashed CM10 and Gapps.
Tab is working fine now... Android 4.2.2. though.

I have the same issues as well. Hopefully CM11 will get updated to resolve the issue.

it seems I solved the problem, apparently.
From recovery, I did factory reset, a full wipe, cache. Then I flashed last nightie, Google apps (without rebooting) and then everything worked.
I still have some crashes with a few app, but nothing too boring
Sent from my GT-N7100 using XDA Premium HD app

Great
Be carefull when installing gapps
There is limited space in /system so only use the core packages
The rest of the google apps can be installed in user space from the store so don't be concerned on missing out

WiFi won't switch on

JTried to switch it on but nothings happening.
I'd previously flashed the pimp my z1 kernel which was made for cm based ROMs, since then I've reflashed the advanced stock kernel again and everything was fine. But WiFi won't switch on, I've rebooted, reinstalled doom kernel. Flushed cache and dalvic. But still nothing. Any ideas anyone?
Mobile data, calls and texts work fine. Just not WiFi.
Any help would be appreciated, I'm trying to avoid a reinstall.
Edit: hotspot doesn't work either.
Update: solved, dirty flashed ROM. All is well again.
Sent from my C6903 using XDA Premium 4 mobile app

dladz said:
JTried to switch it on but nothings happening.
I'd previously flashed the pimp my z1 kernel which was made for cm based ROMs, since then I've reflashed the advanced stock kernel again and everything was fine. But WiFi won't switch on, I've rebooted, reinstalled doom kernel. Flushed cache and dalvic. But still nothing. Any ideas anyone?
Mobile data, calls and texts work fine. Just not WiFi.
Any help would be appreciated, I'm trying to avoid a reinstall.
Edit: hotspot doesn't work either.
Update: solved, dirty flashed ROM. All is well again.
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Happened to me too when I switched kernel from pimp to cmw stock CM11and vice versa. Even switching between TWRP from PA and cwm.
Like mentioned dirty flash is only fix. Might be the new CAF.
yup owns Z1 and stuff. Also if I've helped you don't forget to hit THANKS - actions speak louder that words.

GPS not working on CM and RR

I realised the GPS location doesn't work since I installed CM12.1. I deleted everything to make sure it was nothing I installed or modified afterwards. I tried RR from scratch too, and the problem persists.
Any help will be greatly appreciated
EDIT: It works on ComputerFreek ROM, as it worked on stock 5.1.

I too saw this issue over the weekend. For me it wasn't that it wouldn't work, but wouldn't update as I drove. If I exited navigation and reentered it would find my updated location and stay there. I am on RR and love it else wise.

theexec777 said:
I too saw this issue over the weekend. For me it wasn't that it wouldn't work, but wouldn't update as I drove. If I exited navigation and reentered it would find my updated location and stay there. I am on RR and love it else wise.
Click to expand...
Click to collapse
That is what I saw when using Maps. But after checking with other apps (GPS Test, GPS Status) I realised it was not getting GPS position, so I infered the location shown when launching Maps was from Wifi and Radio signals and that's why navigation wouldn't work.

uveequis said:
That is what I saw when using Maps. But after checking with other apps (GPS Test, GPS Status) I realised it was not getting GPS position, so I infered the location shown when launching Maps was from Wifi and Radio signals and that's why navigation wouldn't work.
Click to expand...
Click to collapse
Thats a good thought, i did not dig that deep. thanks.

uveequis said:
I realised the GPS location doesn't work since I installed CM12.1. I deleted everything to make sure it was nothing I installed or modified afterwards. I tried RR from scratch too, and the problem persists.
Any help will be greatly appreciated
EDIT: It works on ComputerFreek ROM, as it worked on stock 5.1.
Click to expand...
Click to collapse
Yeah computerfreek is stock based so that makes sense.
I'm having no luck as well. Since it found my location the first day I assumed it was working but I now realize it is not gathering GPS data.
Sent from my DROID Turbo using XDA Free mobile app

uveequis said:
I realised the GPS location doesn't work since I installed CM12.1. I deleted everything to make sure it was nothing I installed or modified afterwards. I tried RR from scratch too, and the problem persists.
Any help will be greatly appreciated
EDIT: It works on ComputerFreek ROM, as it worked on stock 5.1.
Click to expand...
Click to collapse
Seems that going back to stock and then getting agps lock, power down then restore ROM GPS then works.
Thanks to baybutcher.

just freeze motgeofences apk with titanium backup and then install TopNTP from the play store, apply the derek gordon file and reboot

Did, and didn't work. This was an issue on the RAZR m as well. Plauged some and not others. Was also solved the same way.

Has this issue been resolved. I am having the same issue. I have tried the fastboot erase modemst1 and modemst2 method which failed due to incorrect partion name as well as the freese geofencesvc and install topntp method, which has failed to yield proper GPS only wifi.

djdalfaro said:
Has this issue been resolved. I am having the same issue. I have tried the fastboot erase modemst1 and modemst2 method which failed due to incorrect partion name as well as the freese geofencesvc and install topntp method, which has failed to yield proper GPS only wifi.
Click to expand...
Click to collapse
You can fix it by getting a solid GPS lock on stock-based ROM and then you can flash the ROM. You should get a lock after.
Sent from my XT1254 using Tapatalk

richii0207 said:
You can fix it by getting a solid GPS lock on stock-based ROM and then you can flash the ROM. You should get a lock after.
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Thank you for the reply. I want to clarify before I apply this. I boot to recovery, flash stock ROM, acquire GPS lock by using Google maps or some other app, then reboot to recovery and flash cm back on? Thanks again.
Sent from my DROID Turbo using XDA-Developers mobile app

djdalfaro said:
Thank you for the reply. I want to clarify before I apply this. I boot to recovery, flash stock ROM, acquire GPS lock by using Google maps or some other app, then reboot to recovery and flash cm back on? Thanks again.
Sent from my DROID Turbo using XDA-Developers mobile app
Click to expand...
Click to collapse
Yep, you got it! If you every reflash firmware, you'll need to do that again. Just for future reference.

richii0207 said:
Yep, you got it! If you every reflash firmware, you'll need to do that again. Just for future reference.
Click to expand...
Click to collapse
Will apply this tonight after college and post status. Thanks again
Sent from my DROID Turbo using XDA-Developers mobile app

djdalfaro said:
Will apply this tonight after college and post status. Thanks again
Sent from my DROID Turbo using XDA-Developers mobile app
Click to expand...
Click to collapse
You are very welcome! To really make sure you use GPS, you can use GPS on your way home

FWIW I had similar issues, tried everything except flashing a stock ROM. I read that some users are experiencing the same problem and that it was fixed in 6.0.1. I was able to get my GPS working with flashing an updated ROM.
Here is the ROM I flashed that is confirmed working in TWRP:
http://forum.xda-developers.com/moto-maxx/development/rom-t3341788 (build 2016-04-07)
I also flashed this baseband / radio package in TWRP:
http://forum.xda-developers.com/droid-turbo/development/droid-turbo-xt1254-bootloader-radio-t3259327 (version SU4TL-44)
I don't know if flashing the baseband / radio package was absolutely necessary, but it didn't break anything on my and was able to successfully retrieve GPS data use the GPS Status app in the play store.
Hope this helps. :good:

Have you tried installing Motorola Modality and Motorola Sensor Services? The ROM that I use enables download of Motorola apps and these two contain drivers necessary for things like the gyroscope to work at all and the GPS may be included in that.

Made twrp backup, Flashed stock rom, acquired GPS lock, restored twrp backup. And it appears all is working! Thank you!
Sent from my DROID Turbo using XDA-Developers mobile app

Lost boot animation. Know how to get a good one?
Sent from my DROID Turbo using XDA-Developers mobile app

djdalfaro said:
Lost boot animation. Know how to get a good one?
Sent from my DROID Turbo using XDA-Developers mobile app
Click to expand...
Click to collapse
Never mind, it changed when I installed the theme engine. Crisis averted.
Sent from my DROID Turbo using XDA-Developers mobile app

Wondering if anyone has any suggestions for this issue on a stock, locked, non-rooted turbo?
I did a full wipe but still have the same issue and am just trying to avoid another wipe and checking after reinstalling each app. It finds my location but doesn't update when using gps thru Google maps.
Reinstalling apps is one thing, but having to reinstall and then drive around after each one is more of a pain.