Related
Desire HD Sound Enhancement
Okay guys, this is an update from my thread in the 'General section'. New and improved, contains a list of working an Non-working ROMs and more scripts.
What is this you ask? Well have you ever thought your Desire HD's speakers suck balls? Can't hear the ringtone go off? Or just a crappy overall speaker quality? Well try this out and HOPEFULLY you'll actually like them
-> List of working ROMs (My experience)
- All variations of Cyanogen mod 7
- All Sense 2.36 based ROMs
- MDJ's ROMs
- All current MIUI ROMs (after flashing snd3254.zip)
- ARHD 5.x
-> List of NON working ROMs (My experience)
- Incredible S and Desire s Ports (Few Incredible S ports MAY work)
- Tested 2 3.0 ports and both didn't work, feel free to test for yourself
PLEASE Give me feedback on What ROM you are using when reporting issues and let me know if it works on your ROM if it's not posted up here so I can add it
Methods
-> Terminal Method
1. Download Terminal Emulator from the market
2. Open it and enable SuperUser permissions by typing 'su' and pressing enter
3. Then type either command 'snd3254 xx' where xx is a number from the sound table (Below) or 'echo xx|snd3254 -dspmode'
-> Gscript Method
1. Download Gscript from the market
2. Open it and enable and add a new script
3. Then type either command 'snd3254 xx' where xx is a number from the sound table (Below) or 'echo xx|snd3254 -dspmode'
4. Make sure you tick super user permissions
5. Run script
-> How to enable script on startup
Gscript application -> press and hold the script you want on boot -> save to sd -> download a program from the market called 'script manager' -> go to the folder sdcard/gscript -> select the saved script -> open as 'script' -> then tick the boxes 'run as root' and 'run at boot' -> save it and close the app and your selected script will run at boot!
Sound table
'snd3254 -dspmode xx'
01. Original_Phone_Rec
02. Original_Phone_Spk
03. Original_Phone
04. Original_Spk
05. Dolby_a_spk
06. Dolby_a_hp
07. Dolby_v_spk
08. Dolby_v_hp
09. Srs_a_hp
10. Srs _a_spk
11. Srs_v_hp
12. Srs_v_spk
13. Bass Booster
14. Blues
15. Classical
16. Country
17. Jazz
18. Latin
19. New Age
20. Piano
21. Pop
22. R&B
23. Rock
24. Treble Booster
25. Vocal Booster
- Keep in mind the above table is for sense GB Roms and the MIUI and CM set up is slightly different... Basically the same
- hp = Headphones spk = speakers
- 13 - 25 only applies to Headphones
- Replace xx with a number from the table
- If you are on MIUI or cm refer to - http://forum.xda-developers.com/showpost.php?p=12345725&postcount=2798
Optional
You can create script shortcuts on your homescreen by selecting -> shortcuts -> gscript lite -> then whatever you named your script
Please note that this has nothing to do with the kernel and I am not a Developer myself. I will however talk to Devs and work with them to TRY incorporate this into their ROMs
Let me know if this makes your speakers better in anyway
qwertyuiop
what does the Srs_a_hp and Srs_v_hp
just the a and v.. what do they mean?
Lord_Schrotty said:
what does the Srs_a_hp and Srs_v_hp
just the a and v.. what do they mean?
Click to expand...
Click to collapse
I'm not sure, although i find options with the 'V' provide better quality
Will have a go at it when I'm off work!
on cynogen mod we have dsp manager , it does the same thing right?
will test that, thanks mate
jags_the1 said:
on cynogen mod we have dsp manager , it does the same thing right?
Click to expand...
Click to collapse
DSP manager is nothing in comparison.
Sent from my Desire HD using XDA Premium App
anyone find out which one is better ? i tested most of them and the 07. Dolby_v_spk and
the 02. Original_Phone_Spk is pretty good
should the script include the word: dspmode, or just 2 digi?
Vita.T said:
should the script include the word: dspmode, or just 2 digi?
Click to expand...
Click to collapse
Both
Sent from my Desire HD using XDA Premium App
This app from the link (http://forum.xda-developers.com/showthread.php?t=1055748) does really work for me.
i downloaded the .zip file and moved it to my sdcard, now what do i do? Everytime i put snd3254 -dspmode 08 into my gscript and try running it it says snd3254 not found...
This is exactly how i type it in gscript
snd3254 -dspmode
then i save it, and try to run it, but it will not run... i seriously want my srs enhancement back...
EDIT: i am running the newest MIUI rom for HTC inspire(desire)
Thank you very much this tweak, it is so genius ! The DHD doesn't have a speaker problem it's just this crappy default setting.
Because it took me some time to get it done (i am still new with android), I post some hints. May be it makes it easier for you.
That's the way I did it. My hardware is a rooted (vodafone) branded DHD with standard HTC ROM (1.39).
- For me as a nooby the instructions in the first post seems like there need to be installed something. This scared me some weeks ago and I didn't do anything.
This is not the case ! The attachement is probably only there for other developers. You don't need to install something, everything is already there !
- In order to test the tweak load the app 'Anroid Terminal Emulator'
- Type in 'su' and click enter. In the following pop-up agree to give the terminal emulation superuser rights. (need rooted phone obviously)
- Type 'snd3254 -dspmode'. In the follwing text the dspmodes are shown and you are asked to enter the number you want. Type '04' and click enter. If you have music in the background playing you will notice the huge difference immediately.
- Alternative: Type 'echo 04|snd3254 -dspmode'. But you need to copy it from here or write it somewhere else. As CyberTod (thanks for this useful hint) described in the original thread the onscreen keyboard doesnt have "|" symbol. It does have a similar looking symbol, but it is not the same and it doesnt work if typed on the onscreen keyboard.
If you like the result you can automate the doing either with Gscript or with Tasker as Pleske explained here: http://forum.xda-developers.com/showpost.php?p=13184812&postcount=99
I automated it with tasker and run it on every reboot automatically (the context is event/system/device boot).
i didnt had the snd3254 file in system/bin
i copied it but i get the message:
cannot open codec aic3254 device -1
any ideas?
Thanx for your work guyz.I tried this method and it worked but not as much as I expected.Then my phone started freezing.I dont know if this has anything to do with it.Wiped fon and downloaded equalizer, a free app on the market and damn that little thing is a devil .The base and the sound enhancement is just great.
Snake-Plissken said:
i didnt had the snd3254 file in system/bin
i copied it but i get the message:
cannot open codec aic3254 device -1
any ideas?
Click to expand...
Click to collapse
run as root
Works fine on ARHD 5.1.7
what you mean run as root?
Type "su" (return) first
Sent from my Desire HD using XDA App
Desire C people!
This stuff is good. Probably you heard about it already, now I tried it and seems to work very well, especially the memory management. Quite a sophisticated tool as far as me noob understand ugh,ugh! :cyclops:
So basically a collection of kernel and memory management tweaks, but has a lot of other like SD card tweaks and maintenance scripts which you can also schedule with SManager. And the download page has some other useful stuff like 3G turbocharger and battery calibrator.
In all it seems like a must have for DC users.
http://forum.xda-developers.com/showthread.php?t=991276
Once you used it a bit it's pretty straight forward and explains everything in details when running the script, and you have the option to "unsupercharge", but have a nandroid backup at hand.
I used two guides, but the first is for Galaxy and the second is less detailed:
http://forum.xda-developers.com/showthread.php?t=1603953
http://forum.xda-developers.com/showthread.php?t=1908505
And for Desire C, check the post below
Many thanks for nikhil16242 for recommending me this, many scripts are in his Customiser already, he would have integrated the whole V6 Supercharger, but Aroma doesn't like it. That would be awesome though!
All credits to zeppelinrox for these truly awesome scripts:good:
One wonders why android doesn't have some of them by default.
V6 Supercharger Install Guide for Desire C
~ v6 supercharger install guide for desire c ~
aka how I have done it, so it's not an absolute one.
zeppelinrox's original thread is here.
Originally Posted by zeppelinrox
What's it do?
It makes your phone FAST... super snappy with better multitasking!
It rearranges and fixes the OOM Groupings and Priorites and lowmemorykiller values.
So basically, it's a COMPLETE MEMORY MANAGEMENT FIX!
It's the ONLY one of it's kind
NO LAUNCHER REDRAWS, faster than ever, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
So fasten your seat belts and enjoy the ride!
Click to expand...
Click to collapse
NOTE: Delete all conflicting scripts from init.d folder, otherwise it will be laggy and annoying!
Conflicting scripts I have found so far:
- all the thunderbolt except miuiCMremount (V6 does most of these like sd card tweaks and zipalign anyway)
- mpengine and laserdroid (also from /system and /xbit)
If you don't know which scripts are from where, unzip nikhil16242's Customiser and check the folders.
Also do not install everything on one breath. Do it gradually (v6 - nullifier - engine flush and so on), test with a demanding game like Temple Run, so you can opt out any possible problems.
What you need:
All V6 scripts are here.
ScriptManager [download]
- If you have stock ROM:
Download Supercharger Starter Kit from the V6 scripts, on the page it's explained how to use it, couldn't be more simple:
Using SuperCharger Starter Kit (Prepares your ROM with the fixed su binary, zipalign binary, sqlite3 binary and busybox v1.19.4... and does NOT include the V6 SuperCharger scipt):
- Extract the zip to the root of the sdcard and it will all be in /sdcard/SuperCharger_Starter_Kit
- With Script Manager, just run StartMeUp.sh to install everything at once.
- Or, in terminal do: su, enter, sh /sdcard/Super*/Start*
Click to expand...
Click to collapse
All the rest is the same as the following:
- If you are on custom ROM:
then busybox is already installed, so you don't need the starter kit.
I. SUPERCHARGER INITIAL SETUP
The script guides you through the process, so watch it closely. In the setup it automatically determines some optimal settings, but you can change them any time.
Step 1. Put the latest V6_SuperCharger_for_Android-UpdateX_XXX (X is the actual version number) on your SD card
Step 2. In SManager:
--- 1. make sure you have granted SuperUser access, and set browse in root (long press recent apps button > Menu > Advanced > Configuration > Browse as root), but if you used before it's already set
--- 2. open the script on your SD card, set the properties to: Favorites (star icon), Root (green android skull icon) and tap Run to execute the script installer.
Step 3. A bunch of text start to come up, watch it closely, it guides you through the installer. Home Locked in Memory? n (No) and press enter and another enter to continue to drivers console.
First it goes to Pit Stop to set Driver Options, where you will be asked for Scroll Speed but also various tweaks which can improve the performance. Go through each and decide if you want them or not (I enabled most of them in he script)
When asks Use Build.Prop? : n (No) to use local.prop - I chose this, it sounds safer.
Step 4. You need to patch services.jar. It can be done automatically or manually (however the script recommends manual, and when I did it automatically for the first time, it did not backup services.jar and could not unsupercharge, only by restoring it from the rom .zip) Don't worry, doing it manually couldn't be easier:
In the Driver's Console choose:
25. Jelly ISCream Parlor {Install services.jar}Choose manual mode, which will take you to the [RC9] ULTIMATIC RC6! [EXE]-=Ultimate Jar Power Tools=-With Maximum MultiTasking Mods! thread in your default browser, from which the essential instructions are the following:
--- 1. Connect your Android to your PC with Android Debugging ENABLED and Mass Storage DISABLED so your device has access to your sdcard. I just put it in Charge Only mode...
--- 2. Download the latest Ultimatic_Jar_Patcher_Tools_XXX_Windows.exe.zip to your PC - Windows exe is NOT zipped. Just remove the .zip extension!
--- 3. Start the exe and follow the instructions in the script. It will ask you which mode you want to use your Launcher in: Hard To Kill Launcher, Die-Hard Launcher or BulletProof Launcher. Choose Hard to Kill (HK), it is the best for our device.
You can add Maximum Multitasking mod as well, according to tests it works fine, but I did not install it in the beginning, then didn't bother
If follow the instructions in the script till the end, your services.jar should be patched, and the script will confirm this.
--- 4. On your phone in V6 script, you are still in the menu 25., right? Press x (exit), which takes you again to the Driver's Console. Choose: 32. SuperClean & ReStart! (ie. Wipe Dalvik Cache & Reboot)
Step 5. Press enter to return to Drivers Console. Pressing enter will automatically run Quick V6 Cust-OOMizer and will calculate optimum SuperMinFree values
Apply SuperMinFree Calculator Settings? : y (Yes) to apply calculated MinFree (low memory killer - lmk) values so you don’t need to choose, but you can change it after completing the initial setup and then running the script again in menu point:
10. Quick V6 Cust-OOMizer.Or if you type n (No), you can choose manually right away, doesn't make a difference. If it was set automatically, go to step 5. and come back later if you want to change it:
For a low memory device like ours, 512 HP recommended, these are the options in menu points:
5. UnLedded (Multitasking) {8,14,40,50,60, 75}
6. Ledded (Balanced) {8,14,55,70,85,100}
7. Super UL (Aggressive) {8,14,75,90,95,125} - it does 130-140MB
However the best setting recommended me by educated colleague nikhil16242 and I tried is:
10 15 25 45 80 100 (slot1 - slot2 and so on)
with this I always have 120-130MB free RAM and no lag, Temple Run is butter smooth Basically it kills processes below that level (but still prioritises them - really smart script), which means less multitasking, but two-three apps that I needed in multitask were working perfectly, I didn't notice any difference, but snappier phone.
Try whichever suits you best.
Step 6. Press Enter - this action will backup Re-SuperCharger files to SD Card, in case you want to restore your Supercharger settings.
Step 7. SuperClean & ReStart : y (Yes), this will wipe your dalvik-cache so bootup time will take longer this time.
Step 8. After restart, open SManager and:
--- 1. Go to /system/etc/init.d (you can bookmark it for later access)
--- 2. Tap on S99SuperCharger and set the following properties:
------ a. Favorites (star icon)
------ b. Root (green android skull icon)
------ c. Start on Boot (gear icon)
--- 3. Tap on Save, close Script Manager and Restart your phone
NOTE:
If you don’t follow step 8., you will get an error the next time you run the script and it will show you owner’s handbook on your default web browser.
II. OOMIFIER & LAUNCHER
If you patched services.jar and choose SuperMinFree values manually then you have this already. If not, then:
OOM Grouping Fixes will determine which are the more priority apps and keeps them alive better. The Launcher mode determines how easy it will be for the mem killer to kill the launcher in case of low memory. Works flippin good, I'm tellin ya
Step 9. After restart, open SManager and Run V6_SuperCharger_for_AndroidX_XXX script again (make sure you run it in root [skull icon] but not boot [gear icon])
--- 1. SuperCharger will run Test Drive, just wait for it to finish and then continue to the Drivers Console.
During the install it should set the optimal mode automatically, which was BulletProof for me, probably because I chose the aggressive memory kill (sounds convincing lol) mode. Anyway, this means the Launcher will never get killed, about which some say it's not recommended.
--- 2. So on the Drivers Console you can choose between these launcher modes in the menu points, in reverse order of toughness:[/INDENT]
11. OOM Grouping Fixes + Hard To Kill Launcher
12. OOM Grouping Fixes + Die-Hard Launcher
13. OOM Grouping Fixes + BulletProof LauncherEventually I changed it to Hard To Kill, but it's up to you.
--- 3. Hard To Kill? : y (Yes) to apply
Press Enter to go back to Drivers Console
III. NITROLAG NULLIFIER
It's an experimental feature, don't know what it does exactly, but I switched it on Everything is flawless for me since, so I say go for it.
Step 10. In the Drivers Console, select:
21. Nitro Lag Nullifier {Experimental}Enter (N)ullify, (U)n-Nullify, E(X)it: N (Nullify) to apply Nitro Lag Nullifier
After applying Nitro Lag Nullifier, press enter to go back to Drivers Console.
IV. 2 in 1 ENGINE FLUSH
It flushes the RAM cache so the phone doesn't get sluggish after days of usage.
The 2 Modes are: -=Fast Engine Flush=- for instant flush and -=Engine Flush-O-Matic=- for automation.
Step 11. In the Drivers Console, select:
17. Engine Flush-O-Matic {ReCoupe RAM Booster}Continue and drop all file system caches? : y (Yes) to clear system cache on RAM
It will ask you (gives you 20 s to decide lol) if you want to automate it, so you don't need to schedule it in SManager. If yes, you set an interval between 1-24, which counts as hours, so it determines how frequently flushes the RAM cache. Some people set it for every hour, so why not, I did that too. Hmmm that was good
After Engine Flush, press enter to go back to Drivers Console.
V. SUPERCLEAN AND RESTART
Wipes dalvik and reboots the phone, you need that before you start to using it.
Step 12. In the Drivers Console, select:
30. SuperClean & ReStart {Wipe Dalvik & Reboot}Do you want to SuperClean & ReStart now? : y (Yes)
VI. VERIFY SUPERCHARGER STATUS
Step 13. After restart, open SManager and run V6 SuperCharger again. You should see Supercharger Level: 100%, then you are good to go.
As the script rolls it indicates your settings so you know what is set and what's not. You can check out the other menu points, and number:
27. Owner's Guide {Open !SuperCharger.html}This opens the... Owners Guide! ...in the default browser, you can wise yourself up about the different options.
VII. KICKASS KERNELISER
Downolad the script and launch it the same way as V6. Look at the text, wisen up and choose KickAss (k).
It will place S98KickAssKerneliser script in init.d, skull it and gear it, and reboot the phone.
TIPS & TROUBLESHOOTING
If you are only 75% supercharged, that probably means MinFree (the mem killer) settings doesn't stick (so you see you have the usual low amount of free RAM). Check the S99Supercharger script in SManager if it has the root and boot privileges (In /system/etc/init.d or Long pressing recent apps button > Menu > Scripts), set them again if they were not and reboot the phone. If it's not set again, open Owner's Guide to figure out what's next, but if you followed the steps properly, you should be fine.
Check the note in the beginning of the post for deleting conflicting scripts!
All the scripts and backups are in two places:
1. on SD card /V6_SuperCharger folder
2. /data/V6_SuperCharger
and the logs and manuals under them.
When you run a script in SuperCharger, it places a separate one in the folders, so you can make widgets with SManager for fast access:
- Long press home screen, select SManager from widgets, locate the SuperCharger folder and select the script you want to have at hand.
- For example for quick change between MinFree modes, the scripts will be in V6SuperCharger/PowerShift_Scripts (you need to run them in SuperCharger first in order to be created separately, or if you installed the additional V6 scripts (or something like that) in nikhil16242's Customiser before, they will be in init.d already).
You'll know you have chosen a suitable MinFree mode if if you play Temple Run with no lags at all shaboooooom!!!!
See, wasn't too hard and you are SuperCharged now.
Enjoy it like a Boss!
Kudos to CarlDeanCatabay and Androidmarketuser for the guides that helped me and are in the OP.
And most of all to zeppelinrox for V6 SuperCharger :good:
Started reading looks great but by ekk I'm finding it hard to get my old head round some of it. Usually when I'm like this I have to read read read till it starts making sense .So will prolly take me a bit of time.
Re: [Script][TWEAKS] V6 Supercharger
This script is really awesome once you get everything done properly,just takes a while to read the entire OP though .
Ram management is another very essential thing to be done on a low ram device like ours.Stock ram management seems to be poor imo so I use this and the results are truely amazing .
Sent from my HTC Desire C using xda app-developers app
thanks
neoyoli said:
Desire C people!
This stuff is good. Probably you heard about it already, now I tried it and seems to work very well, especially the memory management. Quite a sophisticated tool as far as me noob understand ugh,ugh! :cyclops:
So basically a collection of kernel and memory management tweaks, but has a lot of other like SD card tweaks and maintenance scripts which you can also schedule with SManager. And on the download page has some other useful stuff like 3G turbocharger and battery calibrator.
In all it seems like a must have for DC users.
http://forum.xda-developers.com/showthread.php?t=991276
Once you used it a bit it's pretty straight forward and explains everything in details when running the script, and you have the option to "unsupercharge", but have a nandroid backup at hand.
I used this detailed guide, but it's for Galaxy so use your brain
http://forum.xda-developers.com/showthread.php?t=1603953
Here's is an other one, just in case, but less detailed:
http://forum.xda-developers.com/showthread.php?t=1908505
Many thanks for nikhil16242 for recommending me this, many scripts are in his Customiser already, he would have integrated the whole V6 Supercharger, but Aroma doesn't like it. That would be awesome though!
All credits to zeppelinrox for these truly awesome scripts:good:
One wonders why android doesn't have some of them by default.
Click to expand...
Click to collapse
works great
guide updated
Hey guys, well actually i have an issue while i'm trying to run the v6 supercharger. It succesfully passes the drive test but it gets stuck at the next step. it throws me a lot of lines like 'find system/lost+found/ Too many open files' and i can't get rid of it, please help
this guide is quite old now, supercharger has been updated since numerous times. if you have a nandroid backup restore it, if not then ask zeppelinrox in his original thread. also supercharger does automatic backup before you apply the settings, which can be restored from the menu if something goes wrong, try it.
I bought the tablet back on December 2014 with Android 4.4.4 installed. My Teclast x98 Air II model Is (HG6M). There are 2 major problem on the tablet :
1. The playstore will force to close
2. The most critical problem : I cannot play most of the 3D Games, especially those heave 3D Games. I know many user face the same problem.
After month of attempt to contact the Teclast company and seller in Aliexpress, finally they release a solution.
Solution 1 : Play Store Issue
1. Teclast have release a firmware update especially for Teclast x98 Air Series Tablet. You can use the build in TeclastUpdateTool to check the firmware update.
2. If you fail to update (just like me), then you have to manually download the firmware and use the factory flash tool to do a clean install. Meaning all your data will lost, please backup first before proceed.
Link : http://www.teclast.com/tools/pad/pad.php
3. sorry they are all in chinese.. When the page load click on the right hand blue color text. Then it will bring you a new page to enter your model number.
3. Download the firmware
Solution 2 : 3D Games Freeze Issue
1. Download 2 files : 3Dgame update.zip & 3Dgameupdate.zip.tdlex from this link :
http://pan.baidu.com/s/1pJ9LjTL
2. Then use the build in TeclastUpdateTool to flash the file 3Dgame update.zip
3. Reboot the tablet and you will find that a new apps call [Fastmode] installed in the tablet.
4. Every time before play 3D Games make sure the fastmode is enable.
5. Note: if tablet have reboot, the fastmode will be disable. So you have to enable it again before play 3D games.
So far with the fastmode apps , i never have any problem playing heavy 3D Games. Hope this will help those who been looking a solution for the major issue. I consider myself lucky, as the seller able to help me get the solution from Teclast.
adyjob said:
Solution 2 : 3D Games Freeze Issue
1. Download 2 files : 3Dgame update.zip & 3Dgameupdate.zip.tdlex from this link :
http://pan.baidu.com/s/1pJ9LjTL
2. Then use the build in TeclastUpdateTool to flash the file 3Dgame update.zip
3. Reboot the tablet and you will find that a new apps call [Fastmode] installed in the tablet.
4. Every time before play 3D Games make sure the fastmode is enable.
5. Note: if tablet have reboot, the fastmode will be disable. So you have to enable it again before play 3D games.
So far with the fastmode apps , i never have any problem playing heavy 3D Games. Hope this will help those who been looking a solution for the major issue. I consider myself lucky, as the seller able to help me get the solution from Teclast.
Click to expand...
Click to collapse
Is this patch suitable for X98 Air III ?
Hey guys . Finally I got myself a Note 4(Well... Exynos version), and first thing I decided to do, was to root, and install viper4android on my device. BUT! After installing all these libraries and busybox to run V4A... Nothing worked. Sometimes there was no sound at all, and sometimes sound wasn't processed. And finally, after 2 days of googling, testing etc... I found a way to get it to work on Exynos version(N910C)!
So.. How?
Well. Follow my steps and You should have everything working perfectly after 10 minutes .
Disable SoundAlive. Go to Settings->App Manager->swipe to all , and then scroll down to SoundAlive. Now, press turn off(or something like this) and stop or force stop. Done! You're one step closer to that great sound!
Get Perseus kernel for N910C Perseus Kernel, Click here! and flash it, then wipe cache , dalvik.
Reboot to system.
Install V4A app. And libraries(if Your rom doesn't have busybox preinstalled, go to play store and download it.) .
Press menu button(Three dots in the upper right corner, or hold multitasking button) Choose Compatibility mode, and then choose compatible.
Go to headphones tab, or speaker etc, and tap on the main switch and then tap on force activation(I have this app in Polish, so I'm not 100% sure what it says in the english version.)
Done! Now All You have to do is to open up spotify or other app, and choose Equalizer. And select Viper!
Enjoy Your viper sound!
Known Bugs.
It might not work on apps without an option to choose equalizer.
Click to expand...
Click to collapse
Thanks to that guy who made perseus kernel.. halaszk88.
ProtoDeVNan0 said:
Hey guys . Finally I got myself a Note 4(Well... Exynos version), and first thing I decided to do, was to root, and install viper4android on my device. BUT! After installing all these libraries and busybox to run V4A... Nothing worked. Sometimes there was no sound at all, and sometimes sound wasn't processed. And finally, after 2 days of googling, testing etc... I found a way to get it to work on Exynos version(N910C)!
So.. How?
Well. Follow my steps and You should have everything working perfectly after 10 minutes .
Disable SoundAlive. Go to Settings->App Manager->swipe to all , and then scroll down to SoundAlive. Now, press turn off(or something like this) and stop or force stop. Done! You're one step closer to that great sound!
Get Perseus kernel for N910C Perseus Kernel, Click here! and flash it, then wipe cache , dalvik.
Reboot to system.
Install V4A app. And libraries(if Your rom doesn't have busybox preinstalled, go to play store and download it.) .
Press menu button(Three dots in the upper right corner, or hold multitasking button) Choose Compatibility mode, and then choose compatible.
Go to headphones tab, or speaker etc, and tap on the main switch and then tap on force activation(I have this app in Polish, so I'm not 100% sure what it says in the english version.)
Done! Now All You have to do is to open up spotify or other app, and choose Equalizer. And select Viper!
Enjoy Your viper sound!
Known Bugs.
Thanks to that guy who made perseus kernel.. halaszk88.
Click to expand...
Click to collapse
Does it work for you on apps like youtube,mx player and other video apps? Seems to be that on the note 4 i can get v4a to only work on music apps,and not video apps. Everything used to work on note 3 :/
Running BOC3
Sent from my SM-N910C using Tapatalk
Same with me. Compatible mode only works locally. So It won't change sound in the rest of the OS like all apps. And all sounds. But only apps with equalizer option. I'm using V4A all the time, so I'm also trying to fix it somehow..
Is there any app that could fake the device ram to be 2gb so that PUBG mobile works in Moto G2 ?
vizal96 said:
Is there any app that could fake the device ram to be 2gb so that PUBG mobile works in Moto G2 ?
Click to expand...
Click to collapse
No(swap ram might work but the game would have heavy lag ) but a pubg mobile emulator will be released officially soon , u can use that to play on a PC.
james11705 said:
No(swap ram might work but the game would have heavy lag ) but a pubg mobile emulator will be released officially soon , u can use that to play on a PC.
Click to expand...
Click to collapse
Swap ram is an app?
vizal96 said:
Swap ram is an app?
Click to expand...
Click to collapse
Roehsoft is the app I have used before (there are many such apps ), it creates a virtual ram on ur memory card (basically expands RAM virtually) esquires root n be cautious, high value can damage the SD card and don't delete app without removing the swap file.
Like I said , I doubt ul be able to play pubg without lag
*delete
Do you think it will run even if it detects 2GB of RAM?
One of the reasons I left this phone was because of the game experience I had even with the simplest games.
Well it dose works you can't add people tho
PUB-G MOBILE on Moto G3 (Solved)
>First Unlock Bootloader
HERE: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
> Install Twrp
Here :
https://twrp.me/motorola/motorolamotog2015.html
> Boot Twrp
> Install Custom Rom
AOSP Extended -V5.8- Official (Custom ROM).
Here: https://forum.xda-developers.com/moto-g-2014/development/rom-aospextended-rom-v5-8-t3829769
>Flash Super Su and Root Phone
Here:
http://www.devfiles.co/download/XFFfy5DI/UPDATE-SuperSU-v2.46.zip
>Dont Flash Any Gapps
> Install Swapper Pro Apk From Here https://www11.zippyshare.com/d/pOTiRsmM/567/Swapper for Root [Donate] v1.9.apk
> Open App Swapper
> Select Size 4096 MB ( Should Be Free On Internal SD or External SD)
> Set Swappiness to 100%
> SAVE
> Clear Any Apps From Task Manager
> Start PUBG Mobile.
Set All Setting of Graphics to Low.
Enjoy..
:laugh::good:
smartfelix007 said:
>First Unlock Bootloader
HERE: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
> Install Twrp
Here :
https://twrp.me/motorola/motorolamotog2015.html
> Boot Twrp
> Install Custom Rom
AOSP Extended -V5.8- Official (Custom ROM).
Here: https://forum.xda-developers.com/moto-g-2014/development/rom-aospextended-rom-v5-8-t3829769
>Flash Super Su and Root Phone
Here:
http://www.devfiles.co/download/XFFfy5DI/UPDATE-SuperSU-v2.46.zip
>Dont Flash Any Gapps
> Install Swapper Pro Apk From Here https://www11.zippyshare.com/d/pOTiRsmM/567/Swapper for Root [Donate] v1.9.apk
> Open App Swapper
> Select Size 4096 MB ( Should Be Free On Internal SD or External SD)
> Set Swappiness to 100%
> SAVE
> Clear Any Apps From Task Manager
> Start PUBG Mobile.
Set All Setting of Graphics to Low.
Enjoy..
:laugh::good:
Click to expand...
Click to collapse
Will this only work on AEX 5.8 or any other custom ROM? I'm on Cosmic Os 2.1.
I passed my whole yesterday trying to get Pubg Mobile work in our Titan but didn't succeed. GlTool, Build prop edit, Xposed Framework Device Faker. Nothing's getting Pubg to work. It still says "Your device is not supported blah blah...".
Are you sure this method is really going to work? Are you playing Pubg Mobile on your Titan? Is the gameplay smooth? Any lags? Please answer. Thanks
smartfelix007 said:
>First Unlock Bootloader
HERE: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
> Install Twrp
Here :
https://twrp.me/motorola/motorolamotog2015.html
> Boot Twrp
> Install Custom Rom
AOSP Extended -V5.8- Official (Custom ROM).
Here: https://forum.xda-developers.com/moto-g-2014/development/rom-aospextended-rom-v5-8-t3829769
>Flash Super Su and Root Phone
Here:
http://www.devfiles.co/download/XFFfy5DI/UPDATE-SuperSU-v2.46.zip
>Dont Flash Any Gapps
> Install Swapper Pro Apk From Here https://www11.zippyshare.com/d/pOTiRsmM/567/Swapper for Root [Donate] v1.9.apk
> Open App Swapper
> Select Size 4096 MB ( Should Be Free On Internal SD or External SD)
> Set Swappiness to 100%
> SAVE
> Clear Any Apps From Task Manager
> Start PUBG Mobile.
Set All Setting of Graphics to Low.
Enjoy..
:laugh::good:
Click to expand...
Click to collapse
So I followed your guide exactly.
1. My bootloader is already unlocked.
2. TWRP already installed.
3. Downloaded AEX 5.8 and flashed without gapps.
4. Rooted it using SuperSu.
5. Installed swapper pro from your link but the ui was nothing as you have described here.
First it was apply on boot check box and ticked that.
Then it was a empty box and I inputted 4096 in it.
There was no Swappiness slider there which I could slide to 100%.
I just saved it and rebooted my phone.
Downloaded 1.44 Gigabyte's of Pubg and opened it with a big hope. It downloaded additional 166Mb file and gave a prompt to restart the game.
And after restarting, boom!! It worked.... Not.
It still said "Your device is f**king not supported currently. Support will be added later. Spank you for understanding"
Are you sure you tested this method before posting here?
You should try PUBG Lite, it is made from the same company for lower end devices. Download it from Play Store.
ondoin said:
You should try PUBG Lite, it is made from the same company for lower end devices. Download it from Play Store.
Click to expand...
Click to collapse
Yes ondoin, I play PUBGL but it's not officially released in all countries like here in India. We have to download from other website and play using a VPN proxy. And most of the times it shows connection error.
I can try to help
Can you upload build.prop of ur device
Msg me on fb for live support
facebook.com/smartfelix007