Database Develop

[CM7.X/AOSP][KERNEL]Firekernel for Ace - 09.10.2012[TeamCooper]

Code:
#include <standard_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to use these modifications upon your own choice, and if
* you point the finger at me for messing up your device, I'll just sit and laugh at you.
*/
This kernel is based on the latest TheAceKernel http://forum.xda-developers.com/showthread.php?t=1606352 from skynet28. Big thanks to him.
FEATURES:
- most of TheAceKernel features
- battery driver made by LibiSC
- some improvements in idle support for ARM
- overlocked AHB clock at 800,768,729Mhz (improved graphic performance I think)
- some changes in net stack
- improved jhash
- patched lowmemorykiller from zImage-Mod (but it is still compatible witch memory tweaks scripts)
- kernel compression changed to XZ
- default governor is smartassV2 and removed lulzactive (doesn't works for me and made errors in dmesg)
- small changes in smartassV2
- partly disable vsync (I hope)
Hope that's all, my memory isn't good.
My sources: https://github.com/dragonnn/firekernel-ace
Download:
09.10.12
https://dl.dropbox.com/u/1664131/firekernel-09.10.12.zip
28.08.12
https://dl.dropbox.com/u/1664131/firekernel-28.08.12.zip
19.08.12
https://dl.dropbox.com/u/1664131/firekernel-19.08.12.zip
22.07.12
https://dl.dropbox.com/u/1664131/firekernel-22.07.12.zip
23.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma-23.06.12.zip
12.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma-12.06.12.zip
07.06.12
https://dl.dropbox.com/u/1664131/firekernel-aroma.zip - integrate AROMA Installer
04.06.12
https://dl.dropbox.com/u/1664131/firekernel-04.06.12.zip - for unofficial CM
https://dl.dropbox.com/u/1664131/firekernel-official-04.06.12.zip - for official CM (for now without torch, will fix it this evening or tomorrow).
http://dl.dropbox.com/u/1664131/firekernel.zip - for unofficial CM
https://dl.dropbox.com/u/1664131/firekernel-offical.zip - for official CM
Flash in recovery, but made a backup first!
For now only NON-OC version without AROMA installer, maybe that comes witch next updates.
CREDITS:
skynet28 for sources of TheAceKernel
an0nym0us_ for his zImage-Mod patches
ketut.kumajaya for blackhawk tools
LibiSC for the best battery driver
And other they patches I have used (don't remember all, just explored git repos for other phones on github).

Know bugs:
-
FAQ:
- For ROM developers, if you need the boot.img run form adb:
Code:
adb pull /tmp/boot.img
Or use qtadb, this is only way to get boot.img, and don't ask my for this on PM!
Changelog:
- update kgsl driver from teamhacksung
- update some arch specific files from teamhacksung too
- some other patches from teamhacksung (sensors, dram etc.).
29.05.2012
- screen of profile in the kernel, now when you turn of you screen you max cpu clock will by set to 320Mhz and min to 120Mhz! And when you turn it up it goes back to old clock! No need to use SetCPU screen of profile! Kernel based screen of profile is much faster and doesn't lag! Note: if you get lagy music when screen of that means you have to heavy EQ, disable it or use http://forum.xda-developers.com/showthread.php?t=1653140 works good without lag if you don't use REV or VR. Works witch any govenor
- small changes in smartassV2
Note about the update - I don't know why, but for my something sets after boot always ondemand as governor, I tried to add script to set smartassV2 as default but this doesn't work (strange), but you can easy set witch for example SetCPU/No-frills CPU Control.
31.05.2012
- create version for official CM
- update Samsung internal storage drivers and wifi driver
- new locale version
- clean up init scripts in ramdisk
- ondemand on boot bug should be fixed
4.06.2012
- finally disable vsync
- adjustable screen off profile, you can write a simple script to adjust the profile like this:
Code:
#!/system/bin/sh
echo "122880" > /sys/module/cpufreq/parameters/min_screenoff_frequency
echo "245760" > /sys/module/cpufreq/parameters/max_screenoff_frequency
Put into /system/etc/init.d/ and set permission, you can name it for example s99screenoff, you turn of the profile by writing this script:
Code:
#!/system/bin/sh
echo "0" > /sys/module/cpufreq/parameters/screenoff
- updates in zlib, vmalloc and kgsl
- update LibiSC battery driver
07.06.12
- triple buffer for framebuffer
- add oc support
- many changes in mmc driver
- sio as default I/O sheduler
- changes in kgsl driver
- fixed torch in official
- AROMA Installer package
11.06.2012
- fixes min backlight bug
- disable tripple buffer
- add 799Mhz step to save battery in non-OC
- fixes in cpufreq stats
- max in OC is now 844Mhz
- more steps in OC version
12.06.2012
- fixes OC support
23.06.2012
- new battery driver from LibiSC
- ported power supply form 3.4 kernel
- ported cpuidle from 3.2 kernel
- some changes in ext4 driver
- fixes temperature driver
22.07.2012
- update LibiSC battery driver
- some more steps in OC version
- enabled zcache
18.08.2012
- kernel compiled using gcc-linaro
- disable optimaztion for size
- optimaztion level changed to O3
- force to load module when not match version magic (no need to use kernel prefix -CLXXXX...)
- enabled memory compaction
- kernel uses mem{cpy,set}() for {copy_to,clear}_user()
28.08.2012
- battery driver back to 23.06 version witch some changes (should fix fast drop down under 20%)
- update sources to 2.6.35.14
- changes in RCU subsystem
- changes in mempolicy and ashmem
- update BFQ to v2 r1
- update Samsung modules for internal storage and wifi from KTQ
- new cool boot screen
07.10.2012
- complet rewrite and update the AROMA installer
- Add CyanMobileX support
- Fixes dead lock when system memory is low in ashmem
- Disable GENTLTE_FAIR_SLEEPERS for better perfomenc on Android
- Update BFQ to v3r1
- Add extract mode in installer - it can work on all 2.3.X ROM's (maybe stock ROM's too) but pleas don't report bugs when using this methode
- Some small changes in KSM, frontswap and cleancache
09.10.2012
- Fixed bootloop when using Adrenaline Engine (but if you allready have bootloop you need to wipe data and cache, sorry about that)
- redisable GENTLTE_FAIR_SLEEPERS

I'll wait for OC

Hi dragonn!!
I'm really happy to see that you're making your own kernel! I'll install it right away!
Just 2 questions, can i use it with last CM7 RC3 with everything working (especially the proximity sensor)? and is it updated (CL882825)?
Thank you man!

gbueno6 said:
Hi dragonn!!
I'm really happy to see that you're making your own kernel! I'll install it right away!
Just 2 questions, can i use it with last CM7 RC3 with everything working (especially the proximity sensor)? and is it updated (CL882825)?
Thank you man!
Click to expand...
Click to collapse
I don't know about the official CM, try yourself, on CM 7.2 by vo-1 works perfect. What did you mean witch "and is it updated (CL882825)"?

Great news, wonderful to see you carry on the great work of ketut, an0nym0us and skynet28 — this evolving Ace kernel is really a perfect example of how great open-source really is!!!
Nice name too! :cheers:

will my ace burn up in ashes ?
its too damm hot that kernel XD

dragonnn said:
I don't know about the official CM, try yourself, on CM 7.2 by vo-1 works perfect. What did you mean witch "and is it updated (CL882825)"?
Click to expand...
Click to collapse
I meant that in last kolja's build, the kernel is this one: 2.6.35.7-perf-CL882825. Other builds had a lower CL number (I can't remember which one) and it seems that this newer kernel is faster and less battery hungry.
So I just asked if you based your kernel in this last one or in the older ones (like ketut's I think).
Thank you very much! I'll test it ASAP!
Sent from my GT-S5830 using xda premium

gbueno6 said:
I meant that in last kolja's build, the kernel is this one: 2.6.35.7-perf-CL882825. Other builds had a lower CL number (I can't remember which one) and it seems that this newer kernel is faster and less battery hungry.
So I just asked if you based your kernel in this last one or in the older ones (like ketut's I think).
Thank you very much! I'll test it ASAP!
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
For now it is CL562111, maybe when I found the sources of CL882825 will update it. Maybe in next release. Thanks for the idea.
EDIT
I search kolja's github but the sources have CL2X, and the latest update is 10 months ago :?.

dragonnn said:
For now it is CL562111, maybe when I found the sources of CL882825 will update it. Maybe in next release. Thanks for the idea.
Click to expand...
Click to collapse
You're welcome!!
Talk to ilarrain so he can help you because he compiled it some days ago!!
Thank you very much and have a great day!
Sent from my GT-S5830 using xda premium

nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.

an0nym0us_ said:
nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.
Click to expand...
Click to collapse
Hmm I know this (I have problems witch script setlocaleversion witch add to localeversion "+" a the end). But maybe kolja have update his sources, or changed something into it.

an0nym0us_ said:
nice..
finally u compiled your own kernel.
btw the CL882825 and CL562111 is just kernel localversion, those numbers doesnt mean one is newer than another. samsung tends to replace kernel localversion for every gb rom updates, but it probably uses the same source.
Click to expand...
Click to collapse
Yes, sure you're right! I just thought that CL882825 was better or bug fixed compared to CL562111 (just what happened with SoD gone in official nightlies). I'm sorry!

Have it intalled now. Gonna report about bugs.
Sent from my GT-S5830 using XDA

My ace fell faster now.
TORCH DO NOT WORK
Sent from my GT-S5830 using XDA

eryst said:
My ace fell faster now.
TORCH DO NOT WORK
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Strange, watch app are you using, for mi it works witch native CM Torch and witch Widgetsoid from dekstop. And in Camera works too. I didn't change notching in the torch driver.

I have cm7-2012520 I quess. I use normal cm app. When i turn the torch on it fc.
Edit: works in camera app
Sent from my GT-S5830 using XDA

eryst said:
I have cm7-2012520 I quess. I use normal cm app. When i turn the torch on it fc.
Edit: works in camera app
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
Maybe it is because you have official CM, it doesn't like other kernels. I don't use it so I can not help you.

dragonnn said:
Maybe it is because you have official CM, it doesn't like other kernels. I don't use it so I can not help you.
Click to expand...
Click to collapse
It does make sense so i'll flash last vo-1's build to be able to enjoy your kernel!
Just one last question: I see that there are no files inside lib/modules in your kernel so, do I have to install TheAceKernel first (it has those files) and then yours?
Thank you very much again!

gbueno6 said:
It does make sense so i'll flash last vo-1's build to be able to enjoy your kernel!
Just one last question: I see that there are no files inside lib/modules in your kernel so, do I have to install TheAceKernel first (it has those files) and then yours?
Thank you very much again!
Click to expand...
Click to collapse
Ohh, something have fails by creating zip :|, didn't se that, will fix it tomorrow, now I go sleep.
Wysłane z mojego GT-S5830 za pomocą Tapatalk

[Kernel][CM10/MIUI/PA][CM10.1] Kowalski Kernel - OLD BOOTLOADER ONLY for SU660

Kowalski Kernel for CM10/ CM10.1 - Stable release (SU660)​
This kernel supports the old bootloader only, modified to Optimus 2x su660 so I made this post to update users from the kernel by kowalski. I personally tried the kernels myself and I can assure you it's 101% working. I tried hard testing different kernels and I found this working great. Note: Kernel Kowalski still in the process of updating so, we are hoping for new updates soon.
I do not credit myself for this marvel work.
Keys all working this includes all. (Menu, Home, Back, Power and Volume rockers)
Downloads:
Kowalski kernel 100p5 for CM10 /MIUI v4 /ParanoidAndroid OLD BOOTLOADER - http://www.mediafire.com/?y0095ghxc4o8jdf
Kowalski kernel 100p5 for CM10.1 OLD BOOTLOADER - http://www.mediafire.com/?h4b6py36mmkd8b5
How to install:
Make sure youre on the Old Bootloader.
Be sure you're on proper ROM (CM10/CM10.1)
Be sure on latest CWM
Download the kernel you're in.
Copy to storage.
Go to recovery
Clear cache and dalvik.
Install zip.
Reboot.
Click to expand...
Click to collapse
Features
* Compiled in release mode (all debug stripped)
* Battery friendly, performance aware
* 3G modem runtime/suspend idle mode support
* Enhanced wifi power management
* Runtime wifi power management control via sysfs
* Bluetooth deep sleep without disconnections
* OC up to 1.2 GHz on stable releases and up to 1.5 GHz on experimentals
* Dynamic FSync by Faux123, backported from Linux 3.4
* 32M ramhack on the new bootloader, 24M on the old one (for now)
* ROW scheduler by Qualcomm, backported from Linux 3.4
* BFQv5 scheduler, backported from Linux 3.4
* Dynamic Interactive governor, backported from Linux 3.2
* Interactive governor aligned with Google's upstream sources (Linux 3.4)
* Simplified cpu hotplug, the second core will turn off in deep sleep mode
* Single/Dual core mode
* Support for notification lights on compatible roms
* Proportional Rate Reduction for TCP to increase network reliability
* Westwood TCP congestion algorithm enabled by default
* Support for NTFS (read only) and HFS+ filesystems
* Support for NFS 3/4
* Support for custom leds brightness from userspace
* Support for USB fast charge [ Don't keep it active when connected to a pc or it may damage your usb ports. It's meant for fast charging when using car/plane adapters for example ]
* Comes bundled with Kowalski Manager by wfd
Click to expand...
Click to collapse
Change Log
100p5 - 2013/03/03
* Fix derp in voltage table
Click to expand...
Click to collapse
Known Bugs/Problems
* On ICS the brightness controls don't work yet, but automatic brightness does
Click to expand...
Click to collapse
* In Kowalski Manager you can change the power management settings of the wireless card:
- PSP Power Saving Mode ---> your wifi card will use Max PSP when asleep. The kernel default is to sleep in Fast PSP mode.
- Awake Power Management ---> your wifi card will use Fast PSP when awake if enabled, otherwise will use CAM mode.
- Hotspot Power Management ---> when enabling hotspot mode, your wifi card will use Fast PSP if enabled, otherwise the default is to use CAM mode.
CAM (Constantly Awake Mode)
Keeps the client adapter powered up continuously so there is little lag in message response time.
Consumes the most power but offers the highest throughput. Is recommended for desktop computers and devices that use AC power.
Fast PSP (Power Save Mode)
Switches between PSP mode and CAM mode, depending on network traffic. This mode switches to CAM when retrieving a large number of packets and switches back to PSP after the packets have been retrieved.
Is recommended when power consumption is a concern but you need greater throughput than that allowed by Max PSP.
Max PSP (Max Power Savings)
Causes the access point to buffer incoming messages for the client adapter, which wakes up periodically and polls the access point to see if any buffered messages are waiting for it. The adapter can request each message and then go back to sleep.
Conserves the most power but offers the lowest throughput. Is recommended for devices for which power consumption is the ultimate concern (such as small battery-powered devices).
Source will be pushed to my github about 2 or 3 days after a release, to make sure that no major bugs are introduced in the public repository.
This kernel can be compiled with any gcc 4.6.X that supports graphite loop optimizations, so if you want to compile it by yourself you'll have either to build your own toolchain (for example using crosstool-ng), or use one of the many linux prebuilt ones (for example Linaro or CodeSourcery). Make sure they're 4.6.X. Earlier versions may complain a lot and generate and unstable kernel. Please test it thoroughly before releasing it with your rom.
Click to expand...
Click to collapse
Thanks
* pengus77 for this magnificent kernel
* wkpark for unlocking the ics bootloader and his genius ideas for implementing ramhack
* linus, well, for the linux kernel
* massimo69, stonebear, tetsuo55, wfd and carloit for taking the risks of testing possibly harmful pre-releases
* qualcomm, because codeaurora is awesome !
* benee, for his perfect any-kernel installer !
* wfd, for his fantastic Kowalski Manager App !
Click to expand...
Click to collapse
Original thread for the kowalski http://forum.xda-developers.com/showthread.php?t=2097788
Note: I do not credit myself for this, I just want to help other su660 users. :victory:
I'm not responsible if your phone explodes.

I've tried the one for CM10/PA and everything is going well until upto 2-3mins, then it just Freeze my phone.
I don't even know why?
all settings are on default
anybody else tried it too?

genemini said:
I've tried the one for CM10/PA and everything is going well until upto 2-3mins, then it just Freeze my phone.
I don't even know why?
all settings are on default
anybody else tried it too?
Click to expand...
Click to collapse
Old bootloader kernel? Most freezes came up with regarding to voltages settings or either the governors and I/O, try playing with different settings and find out what's works best for you. I haven't any encountered such freezes at the moment.

takeoutttt said:
Old bootloader kernel? Most freezes came up with regarding to voltages settings or either the governors and I/O, try playing with different settings and find out what's works best for you. I haven't any encountered such freezes at the moment.
Click to expand...
Click to collapse
Thank you for building Kowalski Kernel 100p5 for SU. I use it with CM10.1 newest very stable. Could do you build KK exp:120 for SU? I hope you building.

nguyenletuquynh said:
Thank you for building Kowalski Kernel 100p5 for SU. I use it with CM10.1 newest very stable. Could do you build KK exp:120 for SU? I hope you building.
Click to expand...
Click to collapse
Hopefully in future updates :good:

Can you create a tut to make a kk for su660 from kk for p990, so that we can do it ourself :?

i have problem with candy crush
ve got a problem with candy crush saga on a CM10.1, latest kernel from Kowalski
When i start the game, no problem. But when i hit the play button the screen starts flashing, the music starts and the touchscreen responds. The phone keeps on working as supposed to. I can shut the game with the home button.

[VM|Sprint|Boost|Cricket][ExFat] Modded Desire 510 Kernel v2.6.1

dragonhart6505 said:
Side note: if you guys visit the site could you do us a solid and click on an ad? It takes 2 seconds and is a chance to support us with basically a free "donation". We have big plans for our site, though it may not look like much now. Anyway, every click is another few cents towards hosting and gives us a boost in confidence that were doing a great job on these releases. Thanks for your support and much more to come!
Click to expand...
Click to collapse
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked phones, ISIS invasions, ebola outbreaks,
* or any other major catastrophe encountered while running my kernel.
* You flashed this, you did this to yourself. You did this to us all.
* The world shall stone you to death for your crimes against humanity.
* If you want to blame someone, blame my twin, he's evil!
*
* BASIC ADB/FASTBOOT SKILLS REQUIRED
*/

Links:
* V2.6.1: Over on our mobile site
http://m.htcdevserv.com
* V2.6.0: Head over to our mobile site!
http://m.htcdevserv.com
* V2: Head over to my new site!
http://htcdevserv.com
* V1: http://forum.xda-developers.com/devdb/project/dl/?id=10188
MD5sum of original file (please verify): fb85dff3936a9d9cbf39c2f56c1e44eb
* V0: http://forum.xda-developers.com/devdb/project/dl/?id=10134
MD5sum of original file (please verify): 9f9f94df33c22e95ed42636b0a80eaa3​

Changelog:
V2.6.1:
* Choice between msm_hotplug and Intelli-Plug!
* Intelli-thermal
* LCD Notify driver
* USB Fast Charging
* Initial F2FS support
* SELinux set to permissive
* Changed boot defaults
* More CPU Boost options
V2.6.0:
* Added back ExFAT support (SD Cards over 32 GB!)
* Fixed links2sd and apps2sd
* CPU-Boost fixed (Use "Kernel Adiutor" to configure)
V2:
* Boostactive governor
* Touch-boost
* Open Source Wifi Module (Prima)
* 192 MHz Deep Sleep
* Vibration Control
* Sound Controls
* Faster KSM (different than pattyboi's and because of that, a bit slower im sure)
* Intelli-Plug
* Removed Swap
V1:
* F2FS support
* Added SuperSU
* Busybox included
* Gamepad drivers
* GPU idles at 200MHz
* Tweaked GPU Behavior
V0:
* Initial release
* CPU Boost
* CPU Govs
* I/O Schedulers
* Embedded apps
Current bugs:
* You tell me...​

Does front face camera work? I just flashed this kernel and can't seem to swipe over to the front camera.

It doesn't. That's the only bug I can't seem to squash. I'm currently working on it right now.
Sent from my XT1028 using XDA Free mobile app

https://docs.google.com/file/d/0BxKdyS6nmDayYld1cjUwbl9Rblk/edit?usp=docslist_api
Stock kernel ^^^
put in twrp backup folder and restore.
Sent from my XT1028 using XDA Free mobile app

Is write protection removed?

huggs said:
Is write protection removed?
Click to expand...
Click to collapse
Why yes it is
Sent from my XT1028 using XDA Free mobile app

rbheromax said:
Features:​
Embedded Apps in /app: (look using ES File Explorer) Flappy Bird (original), Floating Calc, Performance Control
SickSky Launcher,Terminal Emulator, Xposed Installer
Govs: interactive,conservative,ondemand,wheatley,intelliactive,lionheart,performance
Schedulers: noop,deadline,sio,row,vr,fiops,cfq,bfq,zen
Write Protection removed
CPU Boost enabled
ToDo: Finish "Powersave" mode (disables 2 cores without any slow down)
My settings: 300MHz-1.2GHz Intelliactive, GPU Max 320 MHz, ROW, 4096 Readahead size
Download links in 2nd Post
XDA:DevDB Information
Modded Desire 510 Kernel, Kernel for the HTC Desire 510
Contributors
rbheromax, rbheromax, curbthepain, shinru2004 (I stole a few commits)
Source Code: https://github.com/rbheromax/kernel-htc
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-12-11
Created 2014-12-11
Last Updated 2014-12-11
Click to expand...
Click to collapse
Sent from my XT1028 using XDA Free mobile app

Removed
Sent from my XT1028 using XDA Free mobile app

kernel working great so far only issue is camera...no more sd issues...for xposed plugins could you recommend some good ones?

I don't use xposed. But when I used to, I only had Status bar scroll to top. Double tapping status bar, goes to the top of the page like iPhone
Sent from my XT1028 using XDA Free mobile app

Link = null... New one whenever your free to post another.

Do I understand correct that this kernel doesn't have overclocking?

rbheromax said:
I don't use xposed. But when I used to, I only had Status bar scroll to top. Double tapping status bar, goes to the top of the page like iPhone
Sent from my XT1028 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for this ..the apps were a nice touch ! Kernel is working great

I've managed to squeeze a lil bit more battery out of phone and decrease the heat output (my phone was heating up bad) by lowering the default clock of the GPU. doesn't decrease performance at all (that I notice). new build coming Monday

adambennett08330 said:
kernel working great so far only issue is camera...no more sd issues...for xposed plugins could you recommend some good ones?
Click to expand...
Click to collapse
Best Xposed modules you can have for this phone are xrenamer, sense 6 lockscreen mods, xsense and sense 6 toolbox. But in s6 toolox, you have to enable AOSP recent apps picker or you'll get constant android.media force closes.
Question:
Are there any certain necessary steps/precautions I have to take to flash this kernel using Flashify? My comp's broke so I gotta flash it that way
Edit:
Just flashed with Flashify, and my front facing camera still works!! So does my wifi, data, and as far as I can tell, everything else!!
But I don't have any of the embedded apps in my /System/app or data/app folders. Am I looking in the wrong /app folder possibly?

Are you sure it flashed correctly?
Screenshot Settings>About>Software info >More
Sent from my XT1028 using XDA Free mobile app

Nope just rebooted and it didn't flash. My bad.
I somehow lost my recovery by flashing with Flashify. Guess I gotta find a computer and re-flash twrp...
I think I flashed the kernel to recovery partition.
Edit:
Re-flashed my recovery, flashed the kernel with Flashify, and it worked this time, since I flashed as a boot img not recovery img this time.
FFC seems to be the only thing not working

OK, let me know if you have any other issues
Sent from my XT1028 using XDA Free mobile app

FireKernel for LP (5.1.x) ROMs (3g/4g)

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Support for Governors---
Interactive
Performance
PowerSave
Userspace
Optimizations and Tweaks---
Disabled CRC-Check for upto 30% faster I/O.
Support for Dynamic-FSync (adjusts FSync according to usage resulting in a significant boost in the I/O performance).
Reduced RQ Lock-Contention for upto 0.7% increase in Performance.
Install
Copy the zip to your external or internal memory
Boot to twrp
Select the zip.
Reboot to system
Download-- Note 3 Neo (3g/4g)
XDA:DevDB Information
FireKernel for LP (5.1.x) ROMs (3g/4g), Kernel for the Samsung Galaxy Note 3 Neo
Contributors
FireLord, franciscofranco,Shoaib05
Source Code: https://github.com/FireLord1/android_kernel_samsung_smdk5260/commits/FireKernel-lp
Kernel Special Features: battery life
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2016-10-08

ChangeLog
v1
Code:
FireLord1 - script: use google gcc 4.8
franciscofranco - Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Shoaib0597 - Optimized task_sched_runtime for upto 20% increase in Performance
Shoaib0597 - Added support for CRC Toggle
Shoaib0597 - Reduced OverHead
Shoaib0597 - Enabled ARCH-Power feature
Joonsoo Kim - slub: fix a possible memory leak
franciscofranco - Remove '+' symbol from kernel version string
franciscofranco - drivers: mmc: according to the comment left by the original author disabling a cyclic redundancy check on data blocks by yield a a performance improvement hovering ~30%
Francisco Franco - backport https://lists.linuxfoundation.org/pipermail/ltsi-dev/2013-December/002683.html from Kernel 3.10 workqueue: use a higher bit to give more space to actual non-internal flags
franciscofranco - ksm: check and skip page, if it is already scanned
franciscofranco - sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire. From http://ripke.com/loadavg/moire
franciscofranco - Added fsync on/off support.
Greg Kroah-Hartman - Linux 3.4.40
FireLord1 - Linux: FK: r1
FireLord1 - script: zip: add building script and all
FireLord1 - defconfig: renamed to match script

Reserved
* This is my Kernel from osprey (moto g3). this may not have much features as compared to my first kernel release bcz that is for qcom and in exynos i cant do much BUT ill try to maintain main thing which is common. i.e battery life
* osprey: http://forum.xda-developers.com/2015-moto-g/orig-development/firekernel-v1-0-mm-6-0-x-roms-t3401538
* This is for single sim exynos galaxy note 3 neo.
* Compatible with all the custom roms.
* Can work for stock rom too but one thing will not work that is USB PC connection bcz i have edited the files for cm so..
* Its still using google GCC, will test uber GCC if that seems stable ill cook and give here.
* Well not much features but but.. ill upstream till 3.4.112 one Day!
* As always i dont own note 3 neo but i like to make stuff for it. Thanks to my testers 3g and 4g both.

It's very nice to see this Kernel coming from our osprey. It's the nice kernel for Osprey. Hope it's smooth & stable like osprey for exynos too
Huge kudos for you to work on 'Exynos' like SoC. Best of luck.

Thank you for your dedicated work brother. Appreciate it, and keep it up ?✌?

Thanks, waiting for N7502 custom ROM

Good job @FireLord

It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord

JimmygreecePanathinaikos said:
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
Click to expand...
Click to collapse
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Sent from my MotoG3 using Tapatalk

FireLord said:
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Click to expand...
Click to collapse
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!

JimmygreecePanathinaikos said:
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
Click to expand...
Click to collapse
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything

FireKernel for SM-N7507 (hlltezt)
This is FireKernel with fixed Deadlock bug
Download: AFH

FireLord said:
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
Click to expand...
Click to collapse
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??

JimmygreecePanathinaikos said:
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
Click to expand...
Click to collapse
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Sent from my MotoG3 using Tapatalk

FireLord said:
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Click to expand...
Click to collapse
I installed a xposed module after your kernel so I had to soft reboot

JimmygreecePanathinaikos said:
I installed a xposed module after your kernel so I had to soft reboot
Click to expand...
Click to collapse
Oh.. Then try wiping cache
Sent from my MotoG3 using Tapatalk

Thx for your work. Will try the new kernel with stock rom in a few days.
Sent from my SM-N7505 using XDA-Developers mobile app

does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo

moss20 said:
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
Click to expand...
Click to collapse
Its just custom kernel.. Not bug fixing kernel please test it may fix
Sent from my MotoG3 using Tapatalk

biggoof75 said:
Thx for your work. Will try the new kernel with stock rom in a few days.
Click to expand...
Click to collapse
When you try please tell us if your wifi passwords are deleted after every reboot

[Kernel][M/N][AOSP/LineageOS/MIUI][Linaro 4.9] KaminariKernel R4 [04 March 2018]

KaminariKernel​
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hey folks!
After being a Falcon exclusive for quite a long time, KaminariKernel's LineageOS edition is now available for Peregrine. Have fun.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna tweak stuff, use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Peregrine), Kernel for the Moto G
Contributors
Kamin4ri
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2018-03-04
Created 2016-11-21
Last Updated 2018-03-04

Reserved

Reserved

RESERVED!!!

Reserved too

The standard R1-M release is now available. The others shall be available soon.

Good job m8.
Does it feature the CPU overclock?

What is the difference between Standard and Alternative version? I know there says what is the difference but I want to know how will that affect phone. And which is better for battery life? And why no extra governors? Just curious. Anyways thanks for your hard work! Flashed the Alternative version and no problems so far
Edit: Tried installing Standard version, now the Hotplug menu in Kernel Adiutor is gone, that's intended right?
Edit2: I have a problem, sometimes my phone gets stuck and I have to reboot pressing power button for like 10 seconds. Also happenned that it was locked and led was blinking but I couldnt unlock the phone, black screen. Also happenned since I installed this kernel.

Fedray said:
What is the difference between Standard and Alternative version? I know there says what is the difference but I want to know how will that affect phone. And which is better for battery life? And why no extra governors? Just curious. Anyways thanks for your hard work! Flashed the Alternative version and no problems so far
Edit: Tried installing Standard version, now the Hotplug menu in Kernel Adiutor is gone, that's intended right?
Edit2: I have a problem, sometimes my phone gets stuck and I have to reboot pressing power button for like 10 seconds. Also happenned that it was locked and led was blinking but I couldnt unlock the phone, black screen. Also happenned since I installed this kernel.
Click to expand...
Click to collapse
I'm still thinking about putting extra governors. You went from Alternative to Standard, right? Then no, it shouldnt be gone. I must've done a typo in the updater-script (actually, i did just that, but fixed - hopefully - in R2). And about your phone locking up, could you send me a log or something? (Preferably dmesg)

Kernels updated to R2. Yeah, I skipped R1-N. It was built but i forgot to upload it. It had a messed-up installer script anyway.

Kamin4ri said:
Kernels updated to R2. Yeah, I skipped R1-N. It was built but i forgot to upload it. It had a messed-up installer script anyway.
Click to expand...
Click to collapse
Installed standard version r2, CPU hotplug menu still not available. Working with alternative version.
Enviado desde mi XT1040 mediante Tapatalk

Release 3 is now available! This one supports both Marshmallow and Nougat (single zip for both).
Changes:
- Synced with latest CM (Lineage) source code
- Build optimizations from kwoktopus
- Built with Linaro 6.2
You'll find the download links at the OP.

I'm in Resurrección Remix Marshmallow, this kernel should works? Sorry my bad english

[email protected] said:
I'm in Resurrección Remix Marshmallow, this kernel should works? Sorry my bad english
Click to expand...
Click to collapse
Of course!

Does this kernel support ExFat ?, thanks in advance.

J0hnick said:
Does this kernel support ExFat ?, thanks in advance.
Click to expand...
Click to collapse
It does support it via Filesystem in Userspace (FUSE). But the ROM must have an exFAT FUSE driver, and be able to actually recognise and mount USB sticks or memory cards formatted to the exFAT filesystem. CM and its derivatives/forks fulfill both requirements, whilst the stock firmware fulfills neither (even if you install fuse-exfat binaries, your USB stick or memory card won't automount because the version of vold which is shipped within the stock firmware doesn't support exFAT - you'll have to mount it manually via command line).
I've tried to implement exFAT support by using a kernel driver, but it didn't work well. That was a long time ago

Why did you remove the overclock? Which version has overclocked?
Sent from my XT1040 using XDA-Developers Legacy app

The cell phone gets very hot, the processor frequency drops to 1094mhz and 998mhz, and it gets very slow. Can you disable SoC's Temperature Control?

Joel Oliveira said:
The cell phone gets very hot, the processor frequency drops to 1094mhz and 998mhz, and it gets very slow. Can you disable SoC's Temperature Control?
Click to expand...
Click to collapse
Kernel Auditor is your friend

@Kamin4ri, I found on your AFH dev page the R4 version of this kernel, build date January 31, a bit old & not posted here, yet. Thinking of flashing it on my peregrine running RR N 5.8.2, is it safe enough ?
Since you haven't posted it here, I thought it maybe​ an experimental kernel & not stable enough.