Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Support for Governors---
Interactive
Performance
PowerSave
Userspace
Optimizations and Tweaks---
Disabled CRC-Check for upto 30% faster I/O.
Support for Dynamic-FSync (adjusts FSync according to usage resulting in a significant boost in the I/O performance).
Reduced RQ Lock-Contention for upto 0.7% increase in Performance.
Install
Copy the zip to your external or internal memory
Boot to twrp
Select the zip.
Reboot to system
Download-- Note 3 Neo (3g/4g)
XDA:DevDB Information
FireKernel for LP (5.1.x) ROMs (3g/4g), Kernel for the Samsung Galaxy Note 3 Neo
Contributors
FireLord, franciscofranco,Shoaib05
Source Code: https://github.com/FireLord1/android_kernel_samsung_smdk5260/commits/FireKernel-lp
Kernel Special Features: battery life
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2016-10-08
ChangeLog
v1
Code:
FireLord1 - script: use google gcc 4.8
franciscofranco - Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Shoaib0597 - Optimized task_sched_runtime for upto 20% increase in Performance
Shoaib0597 - Added support for CRC Toggle
Shoaib0597 - Reduced OverHead
Shoaib0597 - Enabled ARCH-Power feature
Joonsoo Kim - slub: fix a possible memory leak
franciscofranco - Remove '+' symbol from kernel version string
franciscofranco - drivers: mmc: according to the comment left by the original author disabling a cyclic redundancy check on data blocks by yield a a performance improvement hovering ~30%
Francisco Franco - backport https://lists.linuxfoundation.org/pipermail/ltsi-dev/2013-December/002683.html from Kernel 3.10 workqueue: use a higher bit to give more space to actual non-internal flags
franciscofranco - ksm: check and skip page, if it is already scanned
franciscofranco - sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire. From http://ripke.com/loadavg/moire
franciscofranco - Added fsync on/off support.
Greg Kroah-Hartman - Linux 3.4.40
FireLord1 - Linux: FK: r1
FireLord1 - script: zip: add building script and all
FireLord1 - defconfig: renamed to match script
Reserved
* This is my Kernel from osprey (moto g3). this may not have much features as compared to my first kernel release bcz that is for qcom and in exynos i cant do much BUT ill try to maintain main thing which is common. i.e battery life
* osprey: http://forum.xda-developers.com/2015-moto-g/orig-development/firekernel-v1-0-mm-6-0-x-roms-t3401538
* This is for single sim exynos galaxy note 3 neo.
* Compatible with all the custom roms.
* Can work for stock rom too but one thing will not work that is USB PC connection bcz i have edited the files for cm so..
* Its still using google GCC, will test uber GCC if that seems stable ill cook and give here.
* Well not much features but but.. ill upstream till 3.4.112 one Day!
* As always i dont own note 3 neo but i like to make stuff for it. Thanks to my testers 3g and 4g both.
It's very nice to see this Kernel coming from our osprey. It's the nice kernel for Osprey. Hope it's smooth & stable like osprey for exynos too
Huge kudos for you to work on 'Exynos' like SoC. Best of luck.
Thank you for your dedicated work brother. Appreciate it, and keep it up ?✌?
Thanks, waiting for N7502 custom ROM
Good job @FireLord
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
JimmygreecePanathinaikos said:
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
Click to expand...
Click to collapse
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Sent from my MotoG3 using Tapatalk
FireLord said:
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Click to expand...
Click to collapse
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
JimmygreecePanathinaikos said:
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
Click to expand...
Click to collapse
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
FireKernel for SM-N7507 (hlltezt)
This is FireKernel with fixed Deadlock bug
Download: AFH
FireLord said:
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
Click to expand...
Click to collapse
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
JimmygreecePanathinaikos said:
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
Click to expand...
Click to collapse
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Sent from my MotoG3 using Tapatalk
FireLord said:
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Click to expand...
Click to collapse
I installed a xposed module after your kernel so I had to soft reboot
JimmygreecePanathinaikos said:
I installed a xposed module after your kernel so I had to soft reboot
Click to expand...
Click to collapse
Oh.. Then try wiping cache
Sent from my MotoG3 using Tapatalk
Thx for your work. Will try the new kernel with stock rom in a few days.
Sent from my SM-N7505 using XDA-Developers mobile app
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
moss20 said:
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
Click to expand...
Click to collapse
Its just custom kernel.. Not bug fixing kernel please test it may fix
Sent from my MotoG3 using Tapatalk
biggoof75 said:
Thx for your work. Will try the new kernel with stock rom in a few days.
Click to expand...
Click to collapse
When you try please tell us if your wifi passwords are deleted after every reboot
Related
Code:
[CENTER]/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/[/CENTER]
THIS KERNEL ONLY WORKS WITH CM13 03/09/2016 MM-BLOB VERSION. DO NOT FLASH ON NIGHTLY VERSIONSKernel Features:Built with GCC 4.9(Will updated)
kernel.org version 3.10.103
Can work with Xposed v86Governors: (Currently Unavaiable)
ADAPTIVE
BIOSHOCK
CONSERVATIVEX
INTERACTIVE
LAGFREE
LIONHEART
ONDEMAND
PERFORMANCE
POWERSAVE
USERSPACE
WHEATLEY
ALUCARD
INTERACTIVEX
HOTPLUG
SMARTMAX
LULZACTIVE
DARKNESS
CYAN
BLUACTIVE
NIGHTMARE
PEGASUSQ
INTELLIACTIVE
SMARTASSH3
YANKACTIVE
SMARTASS2
HOTPLUG
HYBRID
INTEL
To Do List:-Add Alucard Hotplug
-Add Underclocking
-Add I/O Schedulers
-Add Governors
-Try to add Sweep2Sleep(DONE)
-Try to add Sweep2Wake
-Update TC
-Update Kernel Version(DONE)
-Boost Flashlight(DONE)
-Cleaner Base(DONE)
-Try to Dual Led Get to Work
-Add KVMDownloads:
(Please take a backup before flashing)
Gdrive
Notes:
+V0.4 is same with cm stock kernel. If you mess up you can use as backup kernel
+To enable Sweep2Sleep. Download kernel auditor app. Under "Wake" section. Enable Sweep2Sleep and make apply on boot.
XDA:DevDB Information
FTL-Kernel, Kernel for the Asus ZenFone 2
Contributors
oguz298, Nyks45
Source Code: https://github.com/oguz298/FTL-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.2.1
Stable Release Date: 2016-09-25
Created 2016-09-19
Last Updated 2016-09-25
Changelogs:
There's no changelog between 0.1-0.4 because they are too buggy.
Version 0.4
+First boot
+Compiled with GCC 4.9
+Little Fixes
Version 1.1
+Updated Kernel Version to 3.10.103
+Boosted Flashlight Brightness(not on camera just flashlight for now )
+Cleaner Base
Version 1.2
+Added Sweep2Sleep
Version 1.2.1
+Edited Sweep2Sleep for More Smoothness
rez v2
New kernel.Wow.Heed more
Russiamen said:
New kernel.Wow.Heed more
Click to expand...
Click to collapse
Thanks bro
i will test it bro! thx for the hard work!
lineu94 said:
i will test it bro! thx for the hard work!
Click to expand...
Click to collapse
Do you have mm-blobs? and don't forget take a backup
oguz298 said:
Do you have mm-blobs? and don't forget take a backup
Click to expand...
Click to collapse
Yeah, i have the last dirty unicorns, but one question, the kernel already have all the governor listed? I only see a few ones
Sorry for my bad english
lineu94 said:
Yeah, i have the last dirty unicorns, but one question, the kernel already have all the governor listed? I only see a few ones
Sorry for my bad english
Click to expand...
Click to collapse
i mentioned on note. 0.4 is first build it doesn't have any changes(little fixes maybe). I'll add new version in 2 days with new stuff for our zenny. I'm working on brighter flashlight now.
Can you use for 1 day or something to see battery life?(on dirty unicorns. because i have cm i can't test on other roms right now)
oguz298 said:
i mentioned on note. 0.4 is first build it doesn't have any changes(little fixes maybe). I'll add new version in 2 days with new stuff for our zenny. I'm working on brighter flashlight now.
Can you use for 1 day or something to see battery life?(on dirty unicorns. because i have cm i can't test on other roms right now)
Click to expand...
Click to collapse
I will charge my phone, and test it for 1 cycle, I will post the result tomorrow, thx for keeping our zenny alive
This is the partial result, the deep sleep worth very well, in normal use the battery drain a little fast
Sent from my ASUS_Z00A using XDA Labs
lineu94 said:
I will charge my phone, and test it for 1 cycle, I will post the result tomorrow, thx for keeping our zenny alive
Click to expand...
Click to collapse
Hey man. This is great. You have the Wakelock issue too? @oguz298
Use my linaro tc. It's slightly better than the current one. Also there are updated which can be easily cherried. Finally if you are on Telegram contact me there. I will be happy to help.
Will this kernel work on Z008???
Brihanalla said:
Will this kernel work on Z008???
Click to expand...
Click to collapse
Idk because i don't have z008 device
Flashed the v1.1 Kernel....no errors. Boot up phone was then stuck at ASUS logo. Tried to flash v0.4 kernel to return to stock...no errors...Boot up phone was then stuck at ASUS logo again. Thank you for consistently reminding us to take nandroid backup.
By the way ,I'm on Unofficial Cm13 MM Blob 20/09 Z00A 2GB 16ROM
puppetminds said:
Flashed the v1.1 Kernel....no errors. Boot up phone was then stuck at ASUS logo. Tried to flash v0.4 kernel to return to stock...no errors...Boot up phone was then stuck at ASUS logo again. Thank you for consistently reminding us to take nandroid backup.
By the way ,I'm on Unofficial Cm13 MM Blob 20/09 Z00A 2GB 16ROM
Click to expand...
Click to collapse
No custom kernel supports that version of mm blobs. It's because Jason broke a lot of stuff with that which was fine in the 09/03 mm bl Cm13 build.
If you want custom kernels you should stay on 09/03 build.
puppetminds said:
Flashed the v1.1 Kernel....no errors. Boot up phone was then stuck at ASUS logo. Tried to flash v0.4 kernel to return to stock...no errors...Boot up phone was then stuck at ASUS logo again. Thank you for consistently reminding us to take nandroid backup.
By the way ,I'm on Unofficial Cm13 MM Blob 20/09 Z00A 2GB 16ROM
Click to expand...
Click to collapse
I forgot to mention this kernel only works with 03/09 version. Sorry about that. I added big warning to op
oguz298 said:
Idk because i don't have z008 device
Click to expand...
Click to collapse
You can easily make it work on Z008. Just edit your defconfig to compile also a driver called CONFIG_SUPPORT_MIPI_OTM1284A_DISPLAY=y
oguz298 said:
I forgot to mention this kernel only works with 03/09 version. Sorry about that. I added big warning to op
Click to expand...
Click to collapse
No problem......but as always thanks for always reminding us jokers to always backup before doing anything.....thank you for your work....thanks to nutcase as well
This kernel, works in roms based on CM13?
These boot images should work on any LOS-based or CAF-source based ROMs (in theory).
Code:
** Disclaimer
I am not responsible if flashing this ROM bricks your
phone or causes thermonuclear war and ends the
world as we know it. You have been warned.
Kernel Information
ROM Target Device: Samsung Galaxy Grand Prime SM-S920L | SM-G530MU | SM-G530M | SM-G530H | SM-G530FZ | SM-G530P | SM-G530T | SM-G530T1 | SM-G530W
Kernel Status: Beta
Project GitHub Repositories: https://github.com/Galaxy-MSM8916/android_kernel_samsung_msm8916
Project GitHub Branch: cm-14.1-experimental
Project Gerrit Review site: https://review.msm8916.com/
Telegram Channel (for ROM build/completion notifications): https://telegram.me/GrandPrimeTWFZ
Telegram Group (for Q&A): https://telegram.me/joinchat/AJrZvz_pGY7Pvfis9kzMwA
Bug reports: https://bugs.msm8916.com/
Click to expand...
Click to collapse
Device Names
Verify your device codename before downloading any firmwares or recovery images!
Code:
[B]SM-S920L[/B] - [COLOR="DarkSlateBlue"][B]gprimeltetfnvzw[/B][/COLOR]
[B]SM-G530MU[/B] - [COLOR="DarkSlateBlue"][B]gprimeltezt[/B][/COLOR]
[B]SM-G530M[/B] - [COLOR="DarkSlateBlue"][B]fortunalteub[/B][/COLOR]
[B]SM-G530H (XX)[/B] - [COLOR="DarkSlateBlue"][B]fortuna3g[/B][/COLOR]
[B]SM-G530H (XC)[/B] - [COLOR="DarkSlateBlue"][B]fortunave3g[/B][/COLOR]
[B]SM-G530FZ[/B] - [COLOR="DarkSlateBlue"][B]gprimeltexx[/B][/COLOR]
[B]SM-G530T/T1/W[/B] - [COLOR="DarkSlateBlue"][B]gprimelte[/B][/COLOR]
[B]SM-G530P[/B] - [COLOR="DarkSlateBlue"][B]gprimeltespr[/B][/COLOR]
Click to expand...
Click to collapse
Features
Code:
[B]
[COLOR="Red"]
* Latest CAF kernel source merged into kernel.
* CPU overclock to 1612 MHz
* GPU overclock to 650 MHz
[/COLOR]
* If you have any (reasonable) suggestions
for anything, tell me.
[/B]
DownloadAll Jenkins builds are testing builds, and as such, are likely to be extremely unstable or unusable.
This goes doubly for these kernels: You know the risks associated with overclocking, and, though stable,
there may be hiccups in the kernel.
Kernel Builds: https://jenkins.msm8916.com/job/Boot_Images/job/Overclocked_Images/job/Samsung_Galaxy_GRAND_Prime/
RSS: https://jenkins.msm8916.com/job/Boot_Images/job/Overclocked_Images/rssLatest
Click to expand...
Click to collapse
Instructions
If you are completely new to flashing custom ROMs and have no idea how to begin, start by downloading a TWRP image for your device from the links above and flash it using the ODIN tool (see below).
You cannot flash a custom ROM over stock recovery, so downloading a custom recovery is the first thing you will need to do.
Click to expand...
Click to collapse
Installation via recovery (TWRP)
* Download a recent .tar file from the links above for your device.
* Reboot into recovery mode [Press Power+Volume Up+Home].
* Plug in your phone into your computer, extract the tar file and place the .img to a location on your Internal or External Storage on a device.
* Click Install on TWRP on your phone and locate the img file in the phone.
* Enjoy your kernel.
Click to expand...
Click to collapse
Installation via odin
* Download a recent .tar file from the links above for your device.
* Reboot into ODIN mode [Press Power+Volume Down+Home].
* Plug in your phone into your computer, and open the Odin application, and place the .tar file in the AP slot and flash it.
* Enjoy your kernel
Click to expand...
Click to collapse
FAQ
Q: Are you taking device requests?
A: If and only if the device is using an msm8916 chip, and you're willing to buy me/donate the device for testing, sure.
Q: But I don't have that kind of money! What else?
A: Alternatively, if you're skilled with Linux and adb, and have an unsupported device, if you're willing to work with me as a tester, that works as well.
Q: Are you accepting feature requests?
A: Unless you're willing to implement it yourself, no.
Q: Can you make XXX ROM as well as LOS?
A: Unless more people donate, no. I simply don't have the time to maintain more than LOS nor money to hold that many ROMs on my already (tiny) struggling server.
Q: Can I throw money at you?
A: Most certainly. Donations are always welcome.
Click to expand...
Click to collapse
You want to help?
We need hardware power to get the builds done.
If you want to help us go faster, send a PM to @kentone or
@vince2678. Your computer will act as a client for our jenkins server.
In a perfect world, that would be all, but unfortunately no. We need money to keep the server running and keep bringing these ROMs.
As always, logcat any problem you find.
Click to expand...
Click to collapse
PLEASE, don't PM @vince2678, as he's busy right now, and your questions can be not answered. PM @kentone instead, write here on the post, or on the telegram group, your questions will be responded as soon as we can Understand that we have family, studies and jobs aside of this project. Thanks for your understanding
XDA:DevDB Information
[KERNEL] Overclocked Kernel for Galaxy Grand Prime [SM-S920L|SM-G530M/MU/H/P/T/T1/W], Kernel for the Samsung Galaxy Grand Prime
Contributors
vince2678
Source Code: https://github.com/Galaxy-MSM8916/android_kernel_samsung_msm8916
Kernel Special Features:
Version Information
Status: Beta
Created 2017-04-16
Last Updated 2017-08-29
Reserved
Changelog
For more detailed changelog information, see the changelog on the download or jenkins servers for each specific build.
Code:
[B][U]29/08/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] Shifted to using a kernel driver for disabling touch devices
when the screen is off instead of a user service for that. [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] Updated kernel to the latest upstream AOSP and
CAF tags. There should be a noticeable performance boost. [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] Disabled cpusets support, which was slowing
down the system performance. [/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] Data should be working fully on all devices. [/B]
Code:
[B][U]08/06/2017[/U][/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] Video recording should now be working [/B]
Code:
[B][U]01/06/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Updated kernel and prima (wifi)
driver to the latest caf branch LA.BR.1.2.9_rb1.18[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] F2FS should work completely now.
Updated F2FS code from upstream kernel sources and enabled
security extended attribute support (for SElinux) to fix
android support.[/B]
Code:
[B][U]15/05/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B] [B] Added support for SM-G530M (fortunalteub)[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B][B] The sleep issue should be fixed in the
latest build. This was due to the failure to set a
critical kernel variable at boot because the kernel init
system was not interpreting a boot command line variable correctly.[/B]
* [B][[COLOR="Red"]FIX[/COLOR]][/B] [B] F2FS is enabled in-kernel, so F2FS filesystem
mounting and formatting should be working fully.[/B]
Code:
[B][U]05/05/2017[/U][/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Wifi driver is being built as a module for now,
transitioning to a new kernel somehow broke the ability
to build it into the kernel binary.[/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Transitioned to a new kernel based on T560NU and
J500H MM kernel sources (J500HXXU2BPJ9 and T560NUUES1BPL1). [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Updated kernel and wifi driver to LA.BR.1.2.9_rb1.16[/B]
Code:
[B][U]14/04/2017[/U][/B]
* [B] [ [COLOR="Red"]ALL[/COLOR] ][/B] [B] Created DevDB project [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Wifi driver is now built into the kernel. Should
(slightly) improve speed of enabling/disabling wifi. [/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Updated kernel and wifi driver to LA.BR.1.2.9_rb1.14[/B]
* [B][[COLOR="Red"]NOTE[/COLOR]][/B][B] Builds now use sdcardfs from Google. This should
result in faster file operations on the sdcard overall
compared to using FUSE as an overlay.[/B]
Known Issues
Code:
[COLOR="RoyalBlue"][B]fortuna3g[/B][/COLOR]
* [B][[COLOR="Red"]BUG[/COLOR]][/B] [B] Brightness adjustment is broken[/B]
Thanks!
Reserved.
Great work Vince! Gonna try it soon nd will let you know.
Maybe stupid question
But if CPU overclocked to 1612
It won't be damaged or something
I mean why Samsung didn't make GP stock CPU like this ??
Sorry if its stupid question
But if it won't damage the phone CPU
The performance will increased as hell
abooooood said:
Maybe stupid question
But if CPU overclocked to 1612
It won't be damaged or something
I mean why Samsung didn't make GP stock CPU like this ??
Sorry if its stupid question
But if it won't damage the phone CPU
The performance will increased as hell
Click to expand...
Click to collapse
All processors are put limits, snapdragon 410 goes up to 2.1ghz, but it's like asking the mobile phone does not last a month, Do you use xxu or xcu?
Play4NoobWin said:
No boot in xcu
Got stuck in the samsung logo
Tested in aex 4.0
Click to expand...
Click to collapse
Sorry, my fault. Meant to write 'XXU' instead of 'XCU'.
Will make a build for that soon, keep wacthing the thread.
abooooood said:
Maybe stupid question
But if CPU overclocked to 1612
It won't be damaged or something
I mean why Samsung didn't make GP stock CPU like this ??
Sorry if its stupid question
But if it won't damage the phone CPU
The performance will increased as hell
Click to expand...
Click to collapse
I've been using it myself for about a month with no adverse effects.
I chose 1612Mhz because it's fast enough without risking instability. At higher frequencies the memory might not be able to keep up with the cpu/gpu clock, so I have not gone higher than that (though they may work).
vince2678 said:
I've been using it myself for about a month with no adverse effects.
I chose 1612Mhz because it's fast enough without risking instability. At higher frequencies the memory might not be able to keep up with the cpu/gpu clock, so I have not gone higher than that (though they may work).
Click to expand...
Click to collapse
OK thanks for reply
I will keep watching thread for xcu ?
---------- Post added at 02:16 PM ---------- Previous post was at 01:44 PM ----------
Play4NoobWin said:
No boot in xcu
Got stuck in the samsung logo
Tested in aex 4.0
Click to expand...
Click to collapse
What are the bugs of that ROM bro ?
No boot un xxu LOS 14.1
You only see SAMSUNG GALAXY GRAND PRIME.
I USE TRANSLATOR
I Test 13.0
when will you make XCU build ?
@[email protected]
vince2678 said:
I've been using it myself for about a month with no adverse effects.
I chose 1612Mhz because it's fast enough without risking instability. At higher frequencies the memory might not be able to keep up with the cpu/gpu clock, so I have not gone higher than that (though they may work).
Click to expand...
Click to collapse
+1
On 2GB devices it could've been useful but battery consuming as well. Whats the minimum frequency you've set? I suggest you to set to 200Mhz, that will greatly save the battery.
abooooood said:
OK thanks for reply
I will keep watching thread for xcu ?
Click to expand...
Click to collapse
AhMaD eLMoMaNi said:
when will you make XCU build ?
@[email protected]
Click to expand...
Click to collapse
You should wait but please ETA is not allowed.
He'll soon make a build for xcu as well but till then Keep Calm nd Enjoy!
Has.007 said:
+1
On 2GB devices it could've been useful but battery consuming as well. Whats the minimum frequency you've set? I suggest you to set to 200Mhz, that will greatly save the battery.
Click to expand...
Click to collapse
The minimum was already at 200MHz, but thanks for the insight anyways .
he already mentioned for LOS so it may not work for aex
G530T on LOS 13. All seems fine here and over clock is functional. Thanks Vince.
At first thanks alot for this great work ,this OC is very safe and SUPERFAST .but Unfortunately Wifi isn't working on 530H (XCU) LOS 14.1 .This is the Logcat that I've got
I've a few skills on Linux system I can help you to test things if you want.
Code:
04-19 00:20:18.061 1612 2587 D WifiService: setWifiEnabled: true pid=8244, uid=1000
04-19 00:20:18.063 1612 2407 E WifiMonitor: killSupplicant p2ptrue init.svc.wpa_supplicant=unknown init.svc.p2p_supplicant=unknown
04-19 00:20:18.072 1612 2407 D WifiHW : finit_module for "/system/lib/modules/wlan.ko" failed: Exec format error
04-19 00:20:18.072 1612 2407 E WifiStateMachine: Failed to load driver
04-19 00:20:18.075 1612 1612 E WifiController: WifiControllerWifi turn on failed
----I've not found fast charge on Kernel Adiutor , i think you've upload a kernel for another device or something like this ,cuz wlan.ko seems to now be loaded
SM-G530H (XXU) wifi not working
Wifi also isn't working for me on the G530T with the 4/7 build of cm13, but when i use the nightly for 4/16 it works, but then I get no outgoing call audio, but then again I was still getting no outgoing call audio without using the kernel on that build
AhMaD eLMoMaNi said:
At first thanks alot for this great work ,this OC is very safe and SUPERFAST .but Unfortunately Wifi isn't working on 530H (XCU) LOS 14.1 .This is the Logcat that I've got
I've a few skills on Linux system I can help you to test things if you want.
----I've not found fast charge on Kernel Adiutor , i think you've upload a kernel for another device or something like this ,cuz wlan.ko seems to now be loaded
Click to expand...
Click to collapse
The fast charging is not something that has an exposed sysfs interface so it's not configurable.
Clvers said:
SM-G530H (XXU) wifi not working
Click to expand...
Click to collapse
As for the wifi, it has to do with the fact that your devices use a wifi module instead of one built into the kernel. I'll work on a flashable fix for this later this week.
DanteDFG said:
Wifi also isn't working for me on the G530T with the 4/7 build of cm13, but when i use the nightly for 4/16 it works, but then I get no outgoing call audio, but then again I was still getting no outgoing call audio without using the kernel on that build
Click to expand...
Click to collapse
Yes, we switched to using a built in wifi module on the roms i make, so an upgrade is necessary to use the kernel.
vince2678 said:
Yes, we switched to using a built in wifi module on the roms i make, so an upgrade is necessary to use the kernel.
Click to expand...
Click to collapse
So since we'd have to upgrade to use it, and that 4/16 one was a test build and not nightly is it safe to assume the next LO13 nightly will have the in-call audio fixed? I can't hear anything not even if it's ringing the phone unless i switch speaker phone on and off. Or the gprimelte not recieving any more LOS13 builds? I see only LOS14 avail now for it but it has no themes and doesn't update/refresh the screen when watching videos on the browser unless i start dragging my finger across the screen while it loads...
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
Made yank battery profile as default for zzmoove
Added optimax governor
Added alucard governor
Increased rate of charging
Spectrum support
Vibrator intensity control.
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the latest zip from https://www.androidfilehost.com/?w=files&flid=197263
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
CHANGE IO SCHEDULER TO ZEN FOR BETTER BATTERY BACKUP.
ENABLE USB FASTCHARGE FROM KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in https://t.me/Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Update( 23/07/17):
No much changes in this one as I was little busy. Sorry!!!
Now u can actually control vibration intensity thorugh kernel tweaker
Added Governors:
Lionheart
Darkness
Dancedance
LZ4 Compression for faster booting.
Network speed enhanced.
Set governor to either zzmoove or nightmare and reduce maximum frequency around 1500 for better battery life.
If you feel phone is laggy increase the frequency!
Do report if you face any issue or if you need any new feature to be added.
V2.0
New build is up !!!
Link: https://www.androidfilehost.com/?fid=745425885120753737
Changelog:
UKM works perfectly (for synapse)*
Cleaned the zip file(fix for bootloop in aex and nr)
Added fpboost
Added FIOPS iosched
Added Alucard Hotplug*
*Governors can now be changed using synapse.
*Enable Alucard Hotplug for extreme battery saving. Device may slow down and lag. Increase max freq to keep it stable.
NOTE:
For better battery , set governor to zzmoove and max freq around 1.2k-1.5k and also keep 2 or 3 cpu's online .
For more feature request and issue report pm me!!
Will possibly change the bootsplash logo in next build .
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @shubh84 for testing
@Anush12133 @Martichou
Source : https://gitlab.com/Srijith2001/StarCity_ham
Is it stable..??
It has yank battery extreme profile ??? it is good with zzmove governor.
himanshu fulmali said:
Is it stable..??
Click to expand...
Click to collapse
Yup
Safetynet isn't bypassing
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in @SRIJITH2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandey for helping with source
@Chaitanya @sk284 for testing
Click to expand...
Click to collapse
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Bro whats your sot..??
sumanth26 said:
Safetynet isn't bypassing
Click to expand...
Click to collapse
Enable magisk hide root and try. If it doesnt then the feature is not present in the rom.
Depends on the rom also. Kernel supports safetyNet bypass but rom should have that feature to bypass.
himanshu fulmali said:
Bro whats your sot..??
Click to expand...
Click to collapse
6-7 hrs in RR
ashokram343 said:
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Click to expand...
Click to collapse
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Srijith Bharadwaj said:
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Click to expand...
Click to collapse
could you please give step by step information so that i wont make any mistakes please
ashokram343 said:
could you please give step by step information so that i wont make any mistakes please
Click to expand...
Click to collapse
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Srijith Bharadwaj said:
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Click to expand...
Click to collapse
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
ashokram343 said:
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
Click to expand...
Click to collapse
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Srijith Bharadwaj said:
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Click to expand...
Click to collapse
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Flash zui 2.5 and then flash any other N roms
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Bro flash ham nougat firmware and then flash N rom. Your fingerprint should work after this.
Synapse
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @sk284 for testing
Source : https://github.com/Srijith2001/StarCity
Click to expand...
Click to collapse
Users reported that synapse wasn't working so i checked it and fixed it. Now u can download the new zip from https://www.androidfilehost.com/?fid=961840155545580384 . Use the same procedure to flash.
Sorry for the inconvenience caused.
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
raza_maestro said:
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
Click to expand...
Click to collapse
Some other users too faced this problem. I will check to it bro. Will be fixed in next build.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01Based on OpenKirin's source, you'll have same bugs as in RROS
How to install:
Download the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Feautures:
Added blu active governor
Added alucard governor
Added darkness governor
Added bioshock governor
MSDOS fylesystem support
HFS filesystem support
HFS+ filesystem support
zen I/O scheduler
sio I/O scheduler
fiops I/O scheduler
tripndroid I/O scheduler
Option to disable fsync
Disabled detection of unclocked bootloader bt SafetyNet
Faster fingerprint wakeup
Nvidia power patches
Take care because I don't own the device, it has been tested anyway
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
XDA:DevDB Information
WhitePugKernel for the Honor 8 Pro, Kernel for the Honor 8 Pro
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-huawei_hi3660
Kernel Special Features:
Version Information
Status: Testing
Created 2017-07-08
Last Updated 2017-07-12
Fast work there man.
Sent from my Honor 8 using XDA Labs
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
smouker said:
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
Click to expand...
Click to collapse
Thank you for testing. Can you send me your build.prop and I'll fix? Probably I used wrong device name for secure flash.
---EDIT---
Sorry I just realised I linked Honor 8 kernel instead of 8 Pro, going to fix op
OP is fixed, now you shouldn't have any problem @smouker
joe2k01 said:
OP is fixed, now you shouldn't have any problem @smouker
Click to expand...
Click to collapse
Thank you for your work.
I was able to flash the kernel.
Cheers
smouker said:
Thank you for your work.
I was able to flash the kernel.
Cheers
Click to expand...
Click to collapse
Well, report back your experience please :highfive:
joe2k01 said:
Well, report back your experience please :highfive:
Click to expand...
Click to collapse
Fingerprint sensor is faster! Currtently im using I/O-Scheduler Zen an 1024 Readahead.
I underclocked both CPU groups and so far the Phone is still stable
Thank you for your work!
New build released:
Bioshock governor
Tripndroid scheduler
Nvidia power patches
Fixing credits in repo, will fix OP later
Support for both Stock and Custom or just Custom??
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
Both.
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
On stock you'll have bugs like no SD card and buggy camera
can you make dt2w in this kernel?
Ruppi64 said:
can you make dt2w in this kernel?
Click to expand...
Click to collapse
It is already in kernel, I just need a proper way to activate it
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
That would be good, then synonymous times the lockscreen a sense:good:
Ruppi64 said:
That would be good, then synonymous times the lockscreen a sense:good:
Click to expand...
Click to collapse
Yeah but I have to investigate a bit
Hi, I just made a tg group for my kernels users. Here is link http://t.me/WhitePugKernels
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Ruppi64 said:
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Click to expand...
Click to collapse
That guide is for EMUI only. Anyway I may be wrong
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
RZ Kernel aims for as stock experience as possible. It is made from Samsung's stock kernel with stability updates thanks to great guys who made ELS (exynos-linux-stable) branch
It also attempts to increase overall multitasking performance while maintaining good battery life with proper settings
Features
Adapted new Samsung EMS scheduler from Samsung 4.14 kernel (with 16ms PELT)
Gaming optimizations (reduce heat while maintaining performance stability)
Disabled battery-hogging WAKELOCKS
WireGuard and DriveDroid support
Security patch fixes adapted
Thanks to corsicanu for helping me with initial kernel support
XDA:DevDB Information
RZ Kernel, Kernel for the Samsung Galaxy S9
Contributors
remilia15
Source Code: https://github.com/diepquynh/android_kernel_samsung_universal9810
Kernel Special Features:
Version Information
Status: Testing
Created 2020-04-11
Last Updated 2020-08-27
Download link: Drive folder
CHANGELOG:
20200412: Initial release
20200823 [FINAL]: Post #10
Notices and Q&A
The kernel is based on tw10-android-4.9-q branch of ELS, which is currently at stable state from my experience
Other related features of the kernel were picked from other sources. Credits belong to the owner
The kernel's energy costs table is remade in favor of new EMS scheduler
Questions and Answers (Q&A)
Q: AnTuTu scores please?
A: This kernel isn't made for benchmarks so let's not talk about it
Q: My phone gets hot while using this kernel?
A: Short answer: It's your own issue, fix it yourself. Nobody makes a kernel just to burn your hands
Long answer:
Install Termux app from Play Store
Enable screen rotation, open Termux in landspace mode
Type this command: su -c top -d 2
A list of processes will appear and refresh with 2s interval. Find which process consumes the most CPU usage with [%CPU] column and the package name in ARGS column. You should see the culprit of your issue
Reminder: There is no such thing as "I have nothing in background but the phone still heats up". There definitely something happen and 99% of the time it's some of the rogue apps running in background
Q: Can you add X Y Z feature to this kernel?
A: I want to keep the kernel clean and simple. However, if the feature is really useful, I'll consider adapting it with proper performance check before releasing
Q: Installation procedure?
A: Simply flash the kernel with supported ROM and forget. No Magisk reinstallation needed
Reversed for future usage
Another kernel for S9 devices, awesome.?
Thanks
Updated initial release with latest defconfig base for DTC5 vendor
Limit of downloadings from google...
Hey. Will this kernel Work with dtc4 vendor?
Build kernel from scratch
I need help with building kernel outside of android build system.
I have downloaded sources from here: https://github.com/LineageOS/android..._universal9810 , installed cross-compiler, configured with "make exynos9810-starlte_defconfig", build with "make". For now I have file arch/arm64/boot/Image .
How to build correct dtb and pack it with the Image file to bootable image?
Thank you.
Second public build is coming, and this will be the final build of the kernel project!
We have been going through lots of ups and downs in the testing group, so here are the results
Changes:
Fixes zram on boot
Adapted a new kernel scheduler, supporting 32/64-bit task scheduling
Critical scheduler performance fixes
Adapted newer vendor support
As this is the final build of the whole kernel project, I'd like to say thank you to all supporters/developers who helped me improving the kernel. The whole project hasn't lasted long, but it was a great time. This and the RZ Kernel project for Exynos 8895 will also be abandoned, unfortunately
Once again, thank you for all your support!
remilia15 said:
Second public build is coming, and this will be the final build of the kernel project!
We have been going through lots of ups and downs in the testing group, so here are the results
Changes:
Fixes zram on boot
Adapted a new kernel scheduler, supporting 32/64-bit task scheduling
Critical scheduler performance fixes
Adapted newer vendor support
As this is the final build of the whole kernel project, I'd like to say thank you to all supporters/developers who helped me improving the kernel. The whole project hasn't lasted long, but it was a great time. This and the RZ Kernel project for Exynos 8895 will also be abandoned, unfortunately
Once again, thank you for all your support!
Click to expand...
Click to collapse
Arigathanks! I've been using the kernel for quite sometime and I like how it's underclocked by default. What device would you be moving to?
Sad to see such a nice kernel getting abandoned.
What needs to be done to keep it updated and relevant? Would love to keep it alive.
Using this kernel with havoc os, all is good as a daily driver battery life with this combo is awesome
Revontheus said:
Arigathanks! I've been using the kernel for quite sometime and I like how it's underclocked by default. What device would you be moving to?
Click to expand...
Click to collapse
I'm still using my daily driver (S8+) and currently don't have plans buying any other devices
BackToAndroid said:
Sad to see such a nice kernel getting abandoned.
What needs to be done to keep it updated and relevant? Would love to keep it alive.
Click to expand...
Click to collapse
Perhaps you can clone my kernel repo and do something with it. The most contemplating thing is to handle future vendor updates from Samsung. The kernel might go unbootable on latest One UI at some point, so someone must be doing the stock defconfig update (that's the least requirement to boot One UI ROMs with newer vendor)
Hmmm....Usually I can verify that the kernel has been installed by checking it's build date. But it still shows the same like before. I'm running official LOS and flashed the kernel in LOS recovery. According to the log it went fine. Maybe it doesn't work with that recovery?
Edit: Ok, in TWRP it works fine.
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
It works without issues for the most part except for USB C audio output which stutters compared to stock kernel.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
I tried it. Some tweaks not working like showing download speed and reverted back the old power menu (no emergency call) which is baked in the rom and the settings menu changes like 2 battery options in the menu. One is fixed at maximum power saving and cant change while another is on the device health or something which can be change. I also found that sometimes it ramps up the clocks without any reason i still manage to get 4.5-5.3hrs of sot with light usage. The chrome is unusable since it bugged out like its inverted color and cant see sh*t.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
Just flashed it - seems to work fine with 1.8
UweRammelt said:
Just flashed it - seems to work fine with 1.8
Click to expand...
Click to collapse
How was the standby drain? What twrp did you use? I used 3.4.0.0 of TWRP. The chrome is super dark and cant see. Can you confirm this or im an isolated case? Do you think its because of not using twrp 3.3.1.1 that bugged mine? Hope you can help me. Thanks!