Code:
[CENTER]/*
*
* I not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns do some research
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device, i will laugh at you.
*
*/[/CENTER]
THIS KERNEL ONLY WORKS WITH CM13 03/09/2016 MM-BLOB VERSION. DO NOT FLASH ON NIGHTLY VERSIONSKernel Features:Built with GCC 4.9(Will updated)
kernel.org version 3.10.103
Can work with Xposed v86Governors: (Currently Unavaiable)
ADAPTIVE
BIOSHOCK
CONSERVATIVEX
INTERACTIVE
LAGFREE
LIONHEART
ONDEMAND
PERFORMANCE
POWERSAVE
USERSPACE
WHEATLEY
ALUCARD
INTERACTIVEX
HOTPLUG
SMARTMAX
LULZACTIVE
DARKNESS
CYAN
BLUACTIVE
NIGHTMARE
PEGASUSQ
INTELLIACTIVE
SMARTASSH3
YANKACTIVE
SMARTASS2
HOTPLUG
HYBRID
INTEL
To Do List:-Add Alucard Hotplug
-Add Underclocking
-Add I/O Schedulers
-Add Governors
-Try to add Sweep2Sleep(DONE)
-Try to add Sweep2Wake
-Update TC
-Update Kernel Version(DONE)
-Boost Flashlight(DONE)
-Cleaner Base(DONE)
-Try to Dual Led Get to Work
-Add KVMDownloads:
(Please take a backup before flashing)
Gdrive
Notes:
+V0.4 is same with cm stock kernel. If you mess up you can use as backup kernel
+To enable Sweep2Sleep. Download kernel auditor app. Under "Wake" section. Enable Sweep2Sleep and make apply on boot.
XDA:DevDB Information
FTL-Kernel, Kernel for the Asus ZenFone 2
Contributors
oguz298, Nyks45
Source Code: https://github.com/oguz298/FTL-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.2.1
Stable Release Date: 2016-09-25
Created 2016-09-19
Last Updated 2016-09-25
Changelogs:
There's no changelog between 0.1-0.4 because they are too buggy.
Version 0.4
+First boot
+Compiled with GCC 4.9
+Little Fixes
Version 1.1
+Updated Kernel Version to 3.10.103
+Boosted Flashlight Brightness(not on camera just flashlight for now )
+Cleaner Base
Version 1.2
+Added Sweep2Sleep
Version 1.2.1
+Edited Sweep2Sleep for More Smoothness
rez v2
New kernel.Wow.Heed more
Russiamen said:
New kernel.Wow.Heed more
Click to expand...
Click to collapse
Thanks bro
i will test it bro! thx for the hard work!
lineu94 said:
i will test it bro! thx for the hard work!
Click to expand...
Click to collapse
Do you have mm-blobs? and don't forget take a backup
oguz298 said:
Do you have mm-blobs? and don't forget take a backup
Click to expand...
Click to collapse
Yeah, i have the last dirty unicorns, but one question, the kernel already have all the governor listed? I only see a few ones
Sorry for my bad english
lineu94 said:
Yeah, i have the last dirty unicorns, but one question, the kernel already have all the governor listed? I only see a few ones
Sorry for my bad english
Click to expand...
Click to collapse
i mentioned on note. 0.4 is first build it doesn't have any changes(little fixes maybe). I'll add new version in 2 days with new stuff for our zenny. I'm working on brighter flashlight now.
Can you use for 1 day or something to see battery life?(on dirty unicorns. because i have cm i can't test on other roms right now)
oguz298 said:
i mentioned on note. 0.4 is first build it doesn't have any changes(little fixes maybe). I'll add new version in 2 days with new stuff for our zenny. I'm working on brighter flashlight now.
Can you use for 1 day or something to see battery life?(on dirty unicorns. because i have cm i can't test on other roms right now)
Click to expand...
Click to collapse
I will charge my phone, and test it for 1 cycle, I will post the result tomorrow, thx for keeping our zenny alive
This is the partial result, the deep sleep worth very well, in normal use the battery drain a little fast
Sent from my ASUS_Z00A using XDA Labs
lineu94 said:
I will charge my phone, and test it for 1 cycle, I will post the result tomorrow, thx for keeping our zenny alive
Click to expand...
Click to collapse
Hey man. This is great. You have the Wakelock issue too? @oguz298
Use my linaro tc. It's slightly better than the current one. Also there are updated which can be easily cherried. Finally if you are on Telegram contact me there. I will be happy to help.
Will this kernel work on Z008???
Brihanalla said:
Will this kernel work on Z008???
Click to expand...
Click to collapse
Idk because i don't have z008 device
Flashed the v1.1 Kernel....no errors. Boot up phone was then stuck at ASUS logo. Tried to flash v0.4 kernel to return to stock...no errors...Boot up phone was then stuck at ASUS logo again. Thank you for consistently reminding us to take nandroid backup.
By the way ,I'm on Unofficial Cm13 MM Blob 20/09 Z00A 2GB 16ROM
puppetminds said:
Flashed the v1.1 Kernel....no errors. Boot up phone was then stuck at ASUS logo. Tried to flash v0.4 kernel to return to stock...no errors...Boot up phone was then stuck at ASUS logo again. Thank you for consistently reminding us to take nandroid backup.
By the way ,I'm on Unofficial Cm13 MM Blob 20/09 Z00A 2GB 16ROM
Click to expand...
Click to collapse
No custom kernel supports that version of mm blobs. It's because Jason broke a lot of stuff with that which was fine in the 09/03 mm bl Cm13 build.
If you want custom kernels you should stay on 09/03 build.
puppetminds said:
Flashed the v1.1 Kernel....no errors. Boot up phone was then stuck at ASUS logo. Tried to flash v0.4 kernel to return to stock...no errors...Boot up phone was then stuck at ASUS logo again. Thank you for consistently reminding us to take nandroid backup.
By the way ,I'm on Unofficial Cm13 MM Blob 20/09 Z00A 2GB 16ROM
Click to expand...
Click to collapse
I forgot to mention this kernel only works with 03/09 version. Sorry about that. I added big warning to op
oguz298 said:
Idk because i don't have z008 device
Click to expand...
Click to collapse
You can easily make it work on Z008. Just edit your defconfig to compile also a driver called CONFIG_SUPPORT_MIPI_OTM1284A_DISPLAY=y
oguz298 said:
I forgot to mention this kernel only works with 03/09 version. Sorry about that. I added big warning to op
Click to expand...
Click to collapse
No problem......but as always thanks for always reminding us jokers to always backup before doing anything.....thank you for your work....thanks to nutcase as well
This kernel, works in roms based on CM13?
Related
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now (even more) void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if you get screwed up because of that, it's entirely your fault.
*/
Hiya fellas.
I suppose yall know that there's a ported rom from titan/thea (IDCrisis) for our Moto G. And I've ported a rom myself (but I don't plan on releasing it >.<). And this kernel is designed to work with any stock-based (read: ported from titan) rom for our device (especially IDCrisis).
But fair warning: don't even think about flashing it on Lollipop.
Features:
Sources & Optimizations
- Based on CM13's shared falcon/peregrine/titan/thea sources
- Compiled with Uber Toolchain 4.9.4
- Compiled with -O3 optimization & some more flags (e.g. Pipe flag)
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- Ye Olde MPDecision
- AutoSMP
Click to expand...
Click to collapse
Extra CPU Governors
- Bioshock
- Dancedance
- Impulse
- Lionheart
- Smartmax
- Yankactive
- Yankdemand
- Zzmoove No more!!!
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen (Default)
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w Nicht mehr!
- State Notifier driver
- Adreno Idler
- GPU overclock & underclock (533MHz/100MHz) No more!!!
Click to expand...
Click to collapse
Extra Sh*t
- Simplified msm-thermal driver by @kwoktopus Was causing trouble
- Disabled gentle fair sleepers
- USB Fast Charge
- Extra TCP Congestion Controllers
- Compass & Accelerometer drivers now use State Notifier Was causing trouble too
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
For Falcon:
Standard Version
Permissive Version (Flash this only if you're having major SELinux-related issues)
Click to expand...
Click to collapse
For Peregrine:
Standard Version
Permissive Version (Flash this only if you're having major SELinux-related issues)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Looking for previous releases?
Pre-reset builds:
Falcon releases
Peregrine releases
Click to expand...
Click to collapse
Post-reset builds:
Falcon releases
Peregrine releases
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Ran into issues? Go back to the stock kernel - just download one of these!
New Stock IDCrisis Kernel (Adapted from CM13) - Falcon
New Stock IDCrisis Kernel (Adapted from CM13) - Peregrine
Click to expand...
Click to collapse
Flashing Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage, i.e. /sdcard (This is very important! If you flash the zip from a subfolder, you'll be left without wi-fi!!! This is a bug on the install script's side. I'll be looking into it.)
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna tweak stuff, use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo, for putting up them sources
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @lost101, for creating IDCrisis
- @Aayushya, he provided the initial cherry-picks
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @Alberto97, for the Linux version bumps (.43 up to .109)
- @kwoktopus, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (IDCrisis), Kernel for the Moto G
Contributors
kingkaminari
Source Code: https://github.com/Kamin4ri/KaminariKernel/tree/idcrisis
Kernel Special Features: Read above!!!
Version Information
Status: Stable
Current Stable Version: R7
Stable Release Date: 2017-01-02
Current Beta Version: R6 Beta 2
Beta Release Date: 2016-11-01
Created 2016-03-26
Last Updated 2017-01-02
Reserved
Reserved
Reserved
Reserved!
Reserved
Reserved!
For those of you running IDCrisis, no matter which version.
Flash the stock kernel before flashing my kernel. I'll upload a stock titan/thea boot image for you guys to use.
Edit: Here's the image. It doesn't include any modules.
https://www.androidfilehost.com/?fid=24459283995306368
kingkaminari said:
For those of you running IDCrisis, no matter which version.
Flash the stock kernel before flashing my kernel. I'll upload a stock titan/thea boot image for you guys to use.
Edit: Here's the image. It doesn't include any modules.
https://www.androidfilehost.com/?fid=24459283995306368
Click to expand...
Click to collapse
do i need to flash it even if i have the previous version of your idcrisis 2.0?
if yes do i need stock modules also?
Using the latest (1.2) Identity Crisis, single SIM, normal (non-GNL) version. Using the IDCrisis version of the kernel recommended by lost. Falcon 2013 xt1032.
Want to try this kernel. Flashed the stock Titan/Thea image as instructed. Everything fine. Proceed to try to flash the Kernel. Error message. Something like "this kernel is for Lollipop 6.0.x (SDK 23). Your version is Marshmallow 6.0 (SDK 23)". Can't flash. Odd.
I reflashed the older IDCrisis kernel, and it's fine (hello from my Moto G) so at least it didn't go horribly wrong.
same here, couldn't flash it
+1
Enviado desde mi XT1072 mediante Tapatalk
Lolz. Looks like i did **** with the install script. Please open meta-inf/com/google/android/update-binary and remove the compatibility check part (do NOT remove anything else).
I'll upload a fixed flashable zip soon.
Here are the fixed flashable zips. Sorry for the derp, guys.
I lost my root permissions. Of SuperSU when I installed this kernel.
mahadev111 said:
I lost my root permissions. Of SuperSU when I installed this kernel.
Click to expand...
Click to collapse
Was your root systemless? Just reflash SuperSU.
kingkaminari said:
Here are the fixed flashable zips. Sorry for the derp, guys.
Click to expand...
Click to collapse
no worries mate. anyway, i'm able to flash the zip now but it gets stuck on M logo, what's wrong?
lucastracq said:
no worries mate. anyway, i'm able to flash the zip now but it gets stuck on M logo, what's wrong?
Click to expand...
Click to collapse
Funny, mine gets stuck at the WARNING BOOTLOADER UNLOCKED screen (I never got rid of that).
....But hey, it flashed.
Damn. I forgot to say, thats an experimental build using a new codebase. I'll have to switch to the old codebase...
Here's a build based on the old codebase. It has selinux force-set to permissive. Hopefully it boots.
Edit: There's a peregrine version as well.
And here are builds based on the new codebase, also with selinux force-set to permissive.
Selinux on marshmallow is a *****.
Choochter said:
Was your root systemless? Just reflash SuperSU.
Click to expand...
Click to collapse
Yes,root was systemless,I was on identity crysis 1.1d.when I reflashed SuperSU.stucked at boot logo.then I have to reflash rom.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Support for Governors---
Interactive
Performance
PowerSave
Userspace
Optimizations and Tweaks---
Disabled CRC-Check for upto 30% faster I/O.
Support for Dynamic-FSync (adjusts FSync according to usage resulting in a significant boost in the I/O performance).
Reduced RQ Lock-Contention for upto 0.7% increase in Performance.
Install
Copy the zip to your external or internal memory
Boot to twrp
Select the zip.
Reboot to system
Download-- Note 3 Neo (3g/4g)
XDA:DevDB Information
FireKernel for LP (5.1.x) ROMs (3g/4g), Kernel for the Samsung Galaxy Note 3 Neo
Contributors
FireLord, franciscofranco,Shoaib05
Source Code: https://github.com/FireLord1/android_kernel_samsung_smdk5260/commits/FireKernel-lp
Kernel Special Features: battery life
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2016-10-08
ChangeLog
v1
Code:
FireLord1 - script: use google gcc 4.8
franciscofranco - Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Shoaib0597 - Optimized task_sched_runtime for upto 20% increase in Performance
Shoaib0597 - Added support for CRC Toggle
Shoaib0597 - Reduced OverHead
Shoaib0597 - Enabled ARCH-Power feature
Joonsoo Kim - slub: fix a possible memory leak
franciscofranco - Remove '+' symbol from kernel version string
franciscofranco - drivers: mmc: according to the comment left by the original author disabling a cyclic redundancy check on data blocks by yield a a performance improvement hovering ~30%
Francisco Franco - backport https://lists.linuxfoundation.org/pipermail/ltsi-dev/2013-December/002683.html from Kernel 3.10 workqueue: use a higher bit to give more space to actual non-internal flags
franciscofranco - ksm: check and skip page, if it is already scanned
franciscofranco - sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire. From http://ripke.com/loadavg/moire
franciscofranco - Added fsync on/off support.
Greg Kroah-Hartman - Linux 3.4.40
FireLord1 - Linux: FK: r1
FireLord1 - script: zip: add building script and all
FireLord1 - defconfig: renamed to match script
Reserved
* This is my Kernel from osprey (moto g3). this may not have much features as compared to my first kernel release bcz that is for qcom and in exynos i cant do much BUT ill try to maintain main thing which is common. i.e battery life
* osprey: http://forum.xda-developers.com/2015-moto-g/orig-development/firekernel-v1-0-mm-6-0-x-roms-t3401538
* This is for single sim exynos galaxy note 3 neo.
* Compatible with all the custom roms.
* Can work for stock rom too but one thing will not work that is USB PC connection bcz i have edited the files for cm so..
* Its still using google GCC, will test uber GCC if that seems stable ill cook and give here.
* Well not much features but but.. ill upstream till 3.4.112 one Day!
* As always i dont own note 3 neo but i like to make stuff for it. Thanks to my testers 3g and 4g both.
It's very nice to see this Kernel coming from our osprey. It's the nice kernel for Osprey. Hope it's smooth & stable like osprey for exynos too
Huge kudos for you to work on 'Exynos' like SoC. Best of luck.
Thank you for your dedicated work brother. Appreciate it, and keep it up ?✌?
Thanks, waiting for N7502 custom ROM
Good job @FireLord
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
JimmygreecePanathinaikos said:
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
Click to expand...
Click to collapse
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Sent from my MotoG3 using Tapatalk
FireLord said:
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Click to expand...
Click to collapse
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
JimmygreecePanathinaikos said:
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
Click to expand...
Click to collapse
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
FireKernel for SM-N7507 (hlltezt)
This is FireKernel with fixed Deadlock bug
Download: AFH
FireLord said:
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
Click to expand...
Click to collapse
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
JimmygreecePanathinaikos said:
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
Click to expand...
Click to collapse
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Sent from my MotoG3 using Tapatalk
FireLord said:
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Click to expand...
Click to collapse
I installed a xposed module after your kernel so I had to soft reboot
JimmygreecePanathinaikos said:
I installed a xposed module after your kernel so I had to soft reboot
Click to expand...
Click to collapse
Oh.. Then try wiping cache
Sent from my MotoG3 using Tapatalk
Thx for your work. Will try the new kernel with stock rom in a few days.
Sent from my SM-N7505 using XDA-Developers mobile app
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
moss20 said:
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
Click to expand...
Click to collapse
Its just custom kernel.. Not bug fixing kernel please test it may fix
Sent from my MotoG3 using Tapatalk
biggoof75 said:
Thx for your work. Will try the new kernel with stock rom in a few days.
Click to expand...
Click to collapse
When you try please tell us if your wifi passwords are deleted after every reboot
KaminariKernel
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now more void than it already was.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply grab my popcorn and laugh at you.
*
* Tl;dr: if your device crashes and burns, and if that gets you in trouble, it's entirely your fault. [STRIKE]Might be my fault as well, because I'm not a developer, but I don't care. lol[/STRIKE]
*/
Hey folks!
After being a Falcon exclusive for quite a long time, KaminariKernel's LineageOS edition is now available for Peregrine. Have fun.
Features:
Sources & Optimizations
- Based on Lineage's shared falcon/peregrine/titan/thea sources
- Compiled with Linaro 4.9
- Optimized ARM RWSEM & Square Root algorithms
- Kernel-side NEON mode
- Some miscellaneous armv7 tweaks
Click to expand...
Click to collapse
Hotplugging Drivers
- MSM Hotplug
Click to expand...
Click to collapse
Extra CPU Governors
- Impulse
- Smartmax
- Yankactive
- Zzmoove
Click to expand...
Click to collapse
Extra I/O Schedulers
- Bfq
- Fiops
- Sio
- Vr
- Zen
Click to expand...
Click to collapse
Sound
- Faux's Sound Control
- Headset High Performance Mode
Click to expand...
Click to collapse
Screen/GPU
- Kcal Screen Control
- Dt2w/s2w
- Simple GPU Algorithm
- GPU overclock & underclock (533MHz/100MHz)
Click to expand...
Click to collapse
Extra Sh*t
- CPU Overclock (up to 1.6 GHz) (Overclocked version only)
- USB Fast Charge
- Disabled gentle fair sleepers
- Extra TCP Congestion Controllers
- Fsync enabled by default
- Kexec-hardboot patch (for multirom compatibility)
- Power-efficient workqueues
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Unified Marshmallow & Nougat (CM/LineageOS 13 & 14.x)
Click to expand...
Click to collapse
Looking for previous releases?
Go here.
Click to expand...
Click to collapse
Flashing & Tweaking Instructions (Follow this very carefully!!!):
- Place the zip at the root of your phone's internal storage
- Reboot into recovery
- Flash the zip
(Another way: Reboot into recovery without copying the zip, and flash it via adb sideload)
- Reboot again and have fun!
Coming from another kernel which isn't mine? Don't worry, no need to dirty flash the ROM/kernel anymore. The install script now does all the dirty work for you.
If you wanna tweak stuff, use Kernel Adiutor! (Synapse is NOT supported!)
Click to expand...
Click to collapse
Want some info on what this kernel offers you?
Then go here! (Credits to @AssToast for suggesting and to @gsstudios for creating the site!)
Click to expand...
Click to collapse
"Thank You" Section
- Motorola/Lenovo
- Qualcomm/CodeAurora
- The CyanogenMod team
- @Flashhhh, his work kinda inspired me to do this
- @faux123, for Sound Control & Intellithermal
- @savoca, for Kcal Screen Control
- @hurtsky, a huge load of cherry-picks came from his sources
- @YoshiShaPow, for some more stuff
- Some more fellas whose names I can't remember
Click to expand...
Click to collapse
XDA:DevDB Information
KaminariKernel (AOSP/LineageOS, Peregrine), Kernel for the Moto G
Contributors
Kamin4ri
Source Code: https://github.com/Kamin4ri/KaminariKernel/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2018-03-04
Created 2016-11-21
Last Updated 2018-03-04
Reserved
Reserved
RESERVED!!!
Reserved too
The standard R1-M release is now available. The others shall be available soon.
Good job m8.
Does it feature the CPU overclock?
What is the difference between Standard and Alternative version? I know there says what is the difference but I want to know how will that affect phone. And which is better for battery life? And why no extra governors? Just curious. Anyways thanks for your hard work! Flashed the Alternative version and no problems so far
Edit: Tried installing Standard version, now the Hotplug menu in Kernel Adiutor is gone, that's intended right?
Edit2: I have a problem, sometimes my phone gets stuck and I have to reboot pressing power button for like 10 seconds. Also happenned that it was locked and led was blinking but I couldnt unlock the phone, black screen. Also happenned since I installed this kernel.
Fedray said:
What is the difference between Standard and Alternative version? I know there says what is the difference but I want to know how will that affect phone. And which is better for battery life? And why no extra governors? Just curious. Anyways thanks for your hard work! Flashed the Alternative version and no problems so far
Edit: Tried installing Standard version, now the Hotplug menu in Kernel Adiutor is gone, that's intended right?
Edit2: I have a problem, sometimes my phone gets stuck and I have to reboot pressing power button for like 10 seconds. Also happenned that it was locked and led was blinking but I couldnt unlock the phone, black screen. Also happenned since I installed this kernel.
Click to expand...
Click to collapse
I'm still thinking about putting extra governors. You went from Alternative to Standard, right? Then no, it shouldnt be gone. I must've done a typo in the updater-script (actually, i did just that, but fixed - hopefully - in R2). And about your phone locking up, could you send me a log or something? (Preferably dmesg)
Kernels updated to R2. Yeah, I skipped R1-N. It was built but i forgot to upload it. It had a messed-up installer script anyway.
Kamin4ri said:
Kernels updated to R2. Yeah, I skipped R1-N. It was built but i forgot to upload it. It had a messed-up installer script anyway.
Click to expand...
Click to collapse
Installed standard version r2, CPU hotplug menu still not available. Working with alternative version.
Enviado desde mi XT1040 mediante Tapatalk
Release 3 is now available! This one supports both Marshmallow and Nougat (single zip for both).
Changes:
- Synced with latest CM (Lineage) source code
- Build optimizations from kwoktopus
- Built with Linaro 6.2
You'll find the download links at the OP.
I'm in Resurrección Remix Marshmallow, this kernel should works? Sorry my bad english
[email protected] said:
I'm in Resurrección Remix Marshmallow, this kernel should works? Sorry my bad english
Click to expand...
Click to collapse
Of course!
Does this kernel support ExFat ?, thanks in advance.
J0hnick said:
Does this kernel support ExFat ?, thanks in advance.
Click to expand...
Click to collapse
It does support it via Filesystem in Userspace (FUSE). But the ROM must have an exFAT FUSE driver, and be able to actually recognise and mount USB sticks or memory cards formatted to the exFAT filesystem. CM and its derivatives/forks fulfill both requirements, whilst the stock firmware fulfills neither (even if you install fuse-exfat binaries, your USB stick or memory card won't automount because the version of vold which is shipped within the stock firmware doesn't support exFAT - you'll have to mount it manually via command line).
I've tried to implement exFAT support by using a kernel driver, but it didn't work well. That was a long time ago
Why did you remove the overclock? Which version has overclocked?
Sent from my XT1040 using XDA-Developers Legacy app
The cell phone gets very hot, the processor frequency drops to 1094mhz and 998mhz, and it gets very slow. Can you disable SoC's Temperature Control?
Joel Oliveira said:
The cell phone gets very hot, the processor frequency drops to 1094mhz and 998mhz, and it gets very slow. Can you disable SoC's Temperature Control?
Click to expand...
Click to collapse
Kernel Auditor is your friend
@Kamin4ri, I found on your AFH dev page the R4 version of this kernel, build date January 31, a bit old & not posted here, yet. Thinking of flashing it on my peregrine running RR N 5.8.2, is it safe enough ?
Since you haven't posted it here, I thought it maybe an experimental kernel & not stable enough.
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
Made yank battery profile as default for zzmoove
Added optimax governor
Added alucard governor
Increased rate of charging
Spectrum support
Vibrator intensity control.
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the latest zip from https://www.androidfilehost.com/?w=files&flid=197263
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
CHANGE IO SCHEDULER TO ZEN FOR BETTER BATTERY BACKUP.
ENABLE USB FASTCHARGE FROM KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in https://t.me/Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Update( 23/07/17):
No much changes in this one as I was little busy. Sorry!!!
Now u can actually control vibration intensity thorugh kernel tweaker
Added Governors:
Lionheart
Darkness
Dancedance
LZ4 Compression for faster booting.
Network speed enhanced.
Set governor to either zzmoove or nightmare and reduce maximum frequency around 1500 for better battery life.
If you feel phone is laggy increase the frequency!
Do report if you face any issue or if you need any new feature to be added.
V2.0
New build is up !!!
Link: https://www.androidfilehost.com/?fid=745425885120753737
Changelog:
UKM works perfectly (for synapse)*
Cleaned the zip file(fix for bootloop in aex and nr)
Added fpboost
Added FIOPS iosched
Added Alucard Hotplug*
*Governors can now be changed using synapse.
*Enable Alucard Hotplug for extreme battery saving. Device may slow down and lag. Increase max freq to keep it stable.
NOTE:
For better battery , set governor to zzmoove and max freq around 1.2k-1.5k and also keep 2 or 3 cpu's online .
For more feature request and issue report pm me!!
Will possibly change the bootsplash logo in next build .
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @shubh84 for testing
@Anush12133 @Martichou
Source : https://gitlab.com/Srijith2001/StarCity_ham
Is it stable..??
It has yank battery extreme profile ??? it is good with zzmove governor.
himanshu fulmali said:
Is it stable..??
Click to expand...
Click to collapse
Yup
Safetynet isn't bypassing
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in @SRIJITH2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandey for helping with source
@Chaitanya @sk284 for testing
Click to expand...
Click to collapse
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Bro whats your sot..??
sumanth26 said:
Safetynet isn't bypassing
Click to expand...
Click to collapse
Enable magisk hide root and try. If it doesnt then the feature is not present in the rom.
Depends on the rom also. Kernel supports safetyNet bypass but rom should have that feature to bypass.
himanshu fulmali said:
Bro whats your sot..??
Click to expand...
Click to collapse
6-7 hrs in RR
ashokram343 said:
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Click to expand...
Click to collapse
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Srijith Bharadwaj said:
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Click to expand...
Click to collapse
could you please give step by step information so that i wont make any mistakes please
ashokram343 said:
could you please give step by step information so that i wont make any mistakes please
Click to expand...
Click to collapse
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Srijith Bharadwaj said:
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Click to expand...
Click to collapse
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
ashokram343 said:
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
Click to expand...
Click to collapse
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Srijith Bharadwaj said:
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Click to expand...
Click to collapse
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Flash zui 2.5 and then flash any other N roms
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Bro flash ham nougat firmware and then flash N rom. Your fingerprint should work after this.
Synapse
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @sk284 for testing
Source : https://github.com/Srijith2001/StarCity
Click to expand...
Click to collapse
Users reported that synapse wasn't working so i checked it and fixed it. Now u can download the new zip from https://www.androidfilehost.com/?fid=961840155545580384 . Use the same procedure to flash.
Sorry for the inconvenience caused.
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
raza_maestro said:
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
Click to expand...
Click to collapse
Some other users too faced this problem. I will check to it bro. Will be fixed in next build.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01Based on OpenKirin's source, you'll have same bugs as in RROS
How to install:
Download the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Feautures:
Added blu active governor
Added alucard governor
Added darkness governor
Added bioshock governor
MSDOS fylesystem support
HFS filesystem support
HFS+ filesystem support
zen I/O scheduler
sio I/O scheduler
fiops I/O scheduler
tripndroid I/O scheduler
Option to disable fsync
Disabled detection of unclocked bootloader bt SafetyNet
Faster fingerprint wakeup
Nvidia power patches
Take care because I don't own the device, it has been tested anyway
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
XDA:DevDB Information
WhitePugKernel for the Honor 8 Pro, Kernel for the Honor 8 Pro
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-huawei_hi3660
Kernel Special Features:
Version Information
Status: Testing
Created 2017-07-08
Last Updated 2017-07-12
Fast work there man.
Sent from my Honor 8 using XDA Labs
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
smouker said:
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
Click to expand...
Click to collapse
Thank you for testing. Can you send me your build.prop and I'll fix? Probably I used wrong device name for secure flash.
---EDIT---
Sorry I just realised I linked Honor 8 kernel instead of 8 Pro, going to fix op
OP is fixed, now you shouldn't have any problem @smouker
joe2k01 said:
OP is fixed, now you shouldn't have any problem @smouker
Click to expand...
Click to collapse
Thank you for your work.
I was able to flash the kernel.
Cheers
smouker said:
Thank you for your work.
I was able to flash the kernel.
Cheers
Click to expand...
Click to collapse
Well, report back your experience please :highfive:
joe2k01 said:
Well, report back your experience please :highfive:
Click to expand...
Click to collapse
Fingerprint sensor is faster! Currtently im using I/O-Scheduler Zen an 1024 Readahead.
I underclocked both CPU groups and so far the Phone is still stable
Thank you for your work!
New build released:
Bioshock governor
Tripndroid scheduler
Nvidia power patches
Fixing credits in repo, will fix OP later
Support for both Stock and Custom or just Custom??
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
Both.
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
On stock you'll have bugs like no SD card and buggy camera
can you make dt2w in this kernel?
Ruppi64 said:
can you make dt2w in this kernel?
Click to expand...
Click to collapse
It is already in kernel, I just need a proper way to activate it
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
That would be good, then synonymous times the lockscreen a sense:good:
Ruppi64 said:
That would be good, then synonymous times the lockscreen a sense:good:
Click to expand...
Click to collapse
Yeah but I have to investigate a bit
Hi, I just made a tg group for my kernels users. Here is link http://t.me/WhitePugKernels
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Ruppi64 said:
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Click to expand...
Click to collapse
That guide is for EMUI only. Anyway I may be wrong