{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.Please
* do some research if you have any concerns about features included in this TOOL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
FEATURES
Code:
*Flash stock recovery (kitkat)
*Flash stock recovery (JellyBean)
*Flash any recovery located at Data\Recovery
*Flash stock recovery (GPE)
*Download the latest version of cwm and twrp from the app(compatible with kitkat an GPE)
*Fix Boot Logo(KitKat)
*Fix Boot Logo(JellyBean)
*Fix Boot Logo(GPE)
*Reboot options(Normal,Fastboot,Recovery)
*CONVERT moto g to moto g GPE
*Root
*Backup your non-system apps
*Restore your non-system apps
*Record screen(change bit-rate, duration, name , etc)
*Install any .apk located at Data\Apk
*Dump info from device
REQUIREMENTS
*Time
*Read all the tutorial
*Moto g
*Usb debugging enabled
*Unlocked Bootloader (intstructions: https://motorola-global-portal.cust.../bootloader/unlock-your-device-a/action/auth )
HOW TO USE IT
You can fin all the information in this PDF:
INSTRUCTIONS
BUT, HOW ROOT MY DEVICE?
*Put your phone in normal mode(like always)
*Remember have checked usb debugging
*Push supuerSu to sd
*Flash custom recovery
*Boot to recovery from fastboot(down scroll, up select)
*Choose zip from sdcard
*Choose supersu.zip
*Flash it
*Reboot
you are ready....
DOWNLOAD
MotoTool 3.0
Code:
[URL="https://drive.google.com/file/d/0B9MUCjEugQjgazhuMEg5Vmw3bjA/view?usp=sharing"]Direct Download Via GDrive[/URL]
[URL="http://nevermindalonso.wix.com/mototool-aio"]Visit my webpage for mirrors, support and updates! Stay tuned![/URL]
So thanks to:
@Phil3759 for the [CWM Advanced Edition] PhilZ Touch
@a1Pha and @dhacker29 for the recovery == http://forum.xda-developers.com/showthread.php?t=2563599(CWM) , http://forum.xda-developers.com/showthread.php?t=2563599)TWRP
@regaw_leinad for the .dll Android Lib
@ffosilva for GPE CWM CWM for GPE
@denzel09 for the official images for GPE device.
@SystemErrorOne for the new app logo and banner.
@Chainfire for SuperSu
@Boss442 Remove "Padlock" on GPE Model
And maybe...... ME
Special Thanks To This People(Friends) For Help Me With Some Bucks(this make me feel like in the beginning of this project,with all the attitude)... :THANKS:
* @Marty
*marwan alani
*Michael Reibert
*Ahmad Alhudban
*Attila Puskas
*FoneWatcher
ISSUES
Code:
*None, waiting for one..
CHANGELOG
Code:
09/03/14
*Size of the tool now is approx 55 mb
*GUI updated
*Added the function for download recovery
*Added SysTab
*New Code
23/02/14
*Added the function to relock the bootloader(status code:2)(only tested on native GPE)
21/02/14
*Updated TWRP for NON-GPE devices (2.6.3.2, touch is fixed thanks to @dhacker29)
*Updated CWM Advanced Edition for NON-GPE devices(6.13.9)
*Updated CWM Advanced Edition for GPE devices(6.13.9)
*Added CWM Swipe(6.0.4.7, thanks to @dhacker29)
16/02/14
*Updated Ui for the panel drag and drop(install .apk)
*REMOVED restore function for NON-GPE firmware, sorry for this guys.. :(
15/02/14
*Backup your non-system apps
*Restore your non-system apps
*Record screen(change bit-rate, duration, name , etc)
*Install any .apk using drag and drop
12/02/14
*Fixed Restore Function on NON-GPE... all should work perfect..
10/02/14
*Added [CWM Advanced Edition] PhilZ Touch for KitKat
*Added [CWM Advanced Edition] PhilZ Touch for GPE
* Added CWM 6.0.4.6 for KitKat
*Added TWRP 2.6.3.1
*Added CWM and TWRP for JellyBean
*Added CWM 6.0.4.6 for GPE
*Added SuperSu 1.93
GPE FIRMWARE
Code:
[COLOR="Red"]REMEMBER EXTRACT YOUR FIRMWARE AND COPY ALL THE FILES TO GpeImage/ [/COLOR]
[URL]https://mega.co.nz/#!3dZB1YAR!Yd6J9Yg_rtSgSpAY8_ZyKJXtweiCzhkevlvKwnEfFN0[/URL]
Any mirror is welcome :D
HOW RESTORE MY DEVICE TO NON-GPE FIRMWARE
Code:
Well, i have removed this function for my tool because the new firmwares don't include the .bat file, so if you want restore your device please go to this thread
[URL="http://forum.xda-developers.com/showthread.php?t=2542219"]Restore NON-GPE firmware[/URL]
Q&A
-Why i don't have signal when i convert to GPE?
Well this is a know issue to fix it flash your stock fsg, don't know how? don't worry.. copy your stock fsg and put it in the tool folder, then press shift+right click and select open window promp here and paste the next code one by one:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
-I have done the previous steep and continue without signal!!
well, please go to this thread and flash your respective radio via recovery Flash radio using recovery
-Why i can't boot to recovery?
Remember in fastboot mode VolUp SELECT and VolDown SCROLL
-Why i can't install an apk using your tool?
Well, be sure that the apk name don't have spaces, and check if the path of your apk have spaces too... i suggest that: rename your apk (simpler name) EX. xxxxxx.apk (where xxxxx are the name) and move your apk to the desktop, then try again..
-How can i say thank you?
Just press the THANKS BUTTON
Very very cool man!
Will F2F file system of the stock Rom be changed to the GPE EXT4? I've heard that the GPE ext4 implimentation is inferior?
Nice work!
Would be cool if you can automate the root process within your tool.
Volpine said:
Very very cool man!
Will F2F file system of the stock Rom be changed to the GPE EXT4? I've heard that the GPE ext4 implimentation is inferior?
Nice work!
Click to expand...
Click to collapse
Same question, but probably yes.
Another: can you will add an option about radio to choice which of them to use? Example my moto g has en.eu version so it will be good if i will to have an option to choice directly from your tool that radio and so on..
Thanks
I have some questions:
What is the right sequence to use this tool?
- unlock
- flash recovery
- root
- install the rom
Would this work?
Is it possible to unroot and lock the device again in order to be able to use future OTA updates from Google?
Thank you for your feedback.
Volpine said:
Very very cool man!
Will F2F file system of the stock Rom be changed to the GPE EXT4? I've heard that the GPE ext4 implimentation is inferior?
Nice work!
Click to expand...
Click to collapse
Yes
Enviado desde mi XT1032 mediante Tapatalk
readonly24 said:
Would be cool if you can automate the root process within your tool.
Click to expand...
Click to collapse
I still looking how make the process automatic, but adb sudeload in the recovery don't work for me.. I still trying.
Enviado desde mi XT1032 mediante Tapatalk
denzel09 said:
Same question, but probably yes.
Another: can you will add an option about radio to choice which of them to use? Example my moto g has en.eu version so it will be good if i will to have an option to choice directly from your tool that radio and so on..
Thanks
Click to expand...
Click to collapse
Sure buddy ,but I need the files ,I can't download all the original images,but I think you don't will have problems with this tool,I have signal and I live in mexico ..
Enviado desde mi XT1032 mediante Tapatalk
alonsoch said:
Sure buddy ,but I need the files ,I can't download all the original images,but I think you don't will have problems with this tool,I have signal and I live in mexico ..
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
https://mega.co.nz/#!kt8W3aBR!_JdwbbaBJH-Ih0oCa9NAIi5l222ZV4DeTbk1AYrdt50
ohn42 said:
I have some questions:
What is the right sequence to use this tool?
- unlock
- flash recovery
- root
- install the rom
Would this work?
Is it possible to unroot and lock the device again in order to be able to use future OTA updates from Google?
Thank you for your feedback.
Click to expand...
Click to collapse
You need unlock your bootloader first to use this tool,
Install the ROM
Install custom recovery
Push supersu
Boot into recovery and flash super su
If you want relock and unroot you need flash an stock image (4.4.2)... Why? Because this Images are unsigned and can't relock your boot loader
For the ota question,we dont now in this moment,we have all the necessary files to have ota, we need an ota upgrade and see if we can Install it direct from our device (we need stock recovery for this, I will add it)
Enviado desde mi XT1032 mediante Tapatalk
alonsoch said:
You need unlock your bootloader first to use this tool,
Install the ROM
Install custom recovery
Push supersu
Boot into recovery and flash super su
If you want relock and unroot you need flash an stock image (4.4.2)... Why? Because this Images are unsigned and can't relock your boot loader
For the ota question,we dont now in this moment,we have all the necessary files to have ota, we need an ota upgrade and see if we can Install it direct from our device (we need stock recovery for this, I will add it)
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Thanks a lot for your answer. I will give it a try. I´m just curious
ohn42 said:
Thanks a lot for your answer. I will give it a try. I´m just curious
Click to expand...
Click to collapse
I'm curious too! This is why I make a tool I'm working in a new version, it will include all my other tools and a lot of extra things.. Just approx 100 mb.. I'm working on it !!
Enviado desde mi XT1032 mediante Tapatalk
alonsoch said:
I'm curious too! This is why I make a tool I'm working in a new version, it will include all my other tools and a lot of extra things.. Just approx 100 mb.. I'm working on it !!
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
So I should wait for the new tool? Will you finish it soon?
ohn42 said:
So I should wait for the new tool? Will you finish it soon?
Click to expand...
Click to collapse
No buddy use this... I have a lot of homework and my girlfriend is waiting for me so I don't know when I will finish the tool maybe the next week ,
Enviado desde mi XT1032 mediante Tapatalk
alonsoch said:
No buddy use this... I have a lot of homework and my girlfriend is waiting for me so I don't know when I will finish the tool maybe the next week ,
Enviado desde mi XT1032 mediante Tapatalk
Click to expand...
Click to collapse
Ok, cool.
Girlfriend always first!!!
Here is what I did:
I unlocked my Moto G
I flashed "Outside USA" image
I flashed CWM Recovery Error Message: mismatched partition size (recovery)
pushed SuperSu 2 SD
tried to reboot into recovery, but the Moto G rebootet normally and started the setup routine, what worked. But Moto G is not rooted.
What is my error? What did I wrong?
BTW: I have a German retail XT1032 8GB
Any ideas?
ohn42 said:
Here is what I did:
I unlocked my Moto G
I flashed "Outside USA" image
I flashed CWM Recovery Error Message: mismatched partition size (recovery)
pushed SuperSu 2 SD
tried to reboot into recovery, but the Moto G rebootet normally and started the setup routine, what worked. But Moto G is not rooted.
What is my error? What did I wrong?
BTW: I have a German retail XT1032 8GB
Any ideas?
Click to expand...
Click to collapse
That error happens to some users sometimes but cwm should work well. You must ask in cwm thread for better support about this particular problem.
denzel09 said:
That error happens to some users sometimes but cwm should work well. You must ask in cwm thread for better support about this particular problem.
Click to expand...
Click to collapse
Thank you for your awsome fast reply!!!
Unfortunately I´m not even able to start CWM...
---------- Post added at 10:19 PM ---------- Previous post was at 09:33 PM ----------
ohn42 said:
Thank you for your awsome fast reply!!!
Unfortunately I´m not even able to start CWM...
Click to expand...
Click to collapse
Sorry to all.
My Fault. I was using the wrong key in fastboot mode to enter CWM.
I pressed the power button instead of the volume up as described. Now all is working fine.I have Moto G GPE, unlocked and rooted!
Thank you!!!
Happy for you man!
Related
(final version : discontinued) ... I have another device and I'll not develop new version of this tool.
Hi RAZRi owners,
With this tool, you can choice the Recovery that you wish to install : CWM, CWM Touch, TWRP or restore to Stock Recovery !!! Since version 2.0, those recovery tools are fully compatible with JellyBean and KitKat. And since version 2.2 you can root your device with this tool !
Version 2.2 is the final version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recommandation :
You have to install Motorola drivers for your RAZRi on your computer (https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481) and please be sure having an unlocked and rooted device and do not forget to enable "USB Debug" function.
Download link :
https://www.dropbox.com/sh/ewxr6215vn68ysi/0f66UBI8bm
ChangeLog :
Version 2.2 (final version : discontinued) ... I have another device and I'll not develop new version of this tool.
Update TWRP to version 2.8.5.0Update CWM to version 6.0.5.1.4Add a function to Root your device with TwerkMyMoto (Thanks to @VTNC)Version 2.1
Update TWRP to version 2.8.4.1Version 2.0
Fully compatible with kitkat
Update TWRP to version 2.8.4.0
Update CWM to version 6.0.5.1.3Version 1.9
Update TWRP to version 2.8.1.0Version 1.8
Update TWRP to version 2.8.0.1Version 1.7
Update TWRP to version 2.6.3Version 1.6
Update adb.exe, fastboot.exe, AdbWinApi.dll and AdbWinUsbApi.dll from latest official Android SKD adt-bundle-windows-x86_64-20131030
Change color of the textVersion 1.5
Add CWM Touch 6.0.1.9
Update CWM to version 6.0.3.6
Update TWRP to version 2.6.1.1
Some minor bug fixes
Add option to make a donation if you wish Version 1.4
Fix from @HSD-Pilot added to the package to solve CWM install issueVersion 1.3
First public version
You beat me to it!
Great job :good:
amazing job, thank you!
lebobo said:
Hi RAZRi owners,
I made an simple installer to flash TWRP Recovery 2.5 or CWM Recovery 6.0.1.9 or to restore Stock Recovery.
This installer is adapted from @mattlgroff CWM batch file. Thanks for his work : I only cleaned the code and adapted it to be used with TWRP !
Thanks to @turl1 for his CWM and to @Hazou for his TWRP.
Download it here : http://goo.gl/H0IxS
ChangeLog :
1.3 First public version
Click to expand...
Click to collapse
Hai Lebobo, Thk for this TWRP & sorry to ask u here that I am using JB GB (Unlock & root) flash over RSD , then Omar rom & now Pillama0.8 , can i use mattgroff homemade fastboot to JB (91.2.26001.Retail.en.EU.zip) and then mattgroff homemade fastboot to ICS (81.5.39001.Retail.en.GB.zip - NOTE:must i use the ADB&FASTBOOT file from other JB folder-say- mattgroff homemade fastboot to JB (91.2.26001.Retail.en.EU.zip)
Switching between 2 anytime without any OTA update is ok right & it wont brick?
Thks
Hi, I never tried it but I think that you cannot downgrade from JB to ICS without risk of bricking your device... Then be careful!
Envoyé depuis mon XT890 avec Tapatalk
Daniel 9999 said:
Hai Lebobo, Thk for this TWRP & sorry to ask u here that I am using JB GB (Unlock & root) flash over RSD , then Omar rom & now Pillama0.8 , can i use mattgroff homemade fastboot to JB (91.2.26001.Retail.en.EU.zip) and then mattgroff homemade fastboot to ICS (81.5.39001.Retail.en.GB.zip - NOTE:must i use the ADB&FASTBOOT file from other JB folder-say- mattgroff homemade fastboot to JB (91.2.26001.Retail.en.EU.zip)
Switching between 2 anytime without any OTA update is ok right & it wont brick?
Thks
Click to expand...
Click to collapse
If you have unlocked your bootloader and will be using one of Mattlgroff's homemade fastboot to downgrade to ICS you will be safe.
Hi guys.
I currently have unlocked loader and I have unrooted and trying to get rid of the message on boot up .. Here are my errors I will happily donate £10 if you can help .
I placed into other thread but no help...
I have tried all across the net . all the tools also . ..
I am on 91.2.29001.xt890.retail.in.GB I flashed with rsd.....
Regards
Sent from my Nexus 4 using xda app-developers app
First this is in the wrong thread. Here we talk about the installer for Recovery's.
Second. The thing u are doing have as far as I know no one ever done. Changing the logo can get u a hard brick. And when u got it locked and unlock it again there is a hugh chance that u get the unlocking logo again. I can't help u with that, but maybe someone els. But pls make another thread about it
Sent from my XT890 using xda app-developers app
Hazou said:
First this is in the wrong thread. Here we talk about the installer for Recovery's.
Second. The thing u are doing have as far as I know no one ever done. Changing the logo can get u a hard brick. And when u got it locked and unlock it again there is a hugh chance that u get the unlocking logo again. I can't help u with that, but maybe someone els. But pls make another thread about it
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Thank you . and sorry. I posted in correct thread and pmd dev but no answers .
Sent from my Nexus 4 using xda app-developers app
wardy01 said:
Hi guys.
I currently have unlocked loader and I have unrooted and trying to get rid of the message on boot up .. Here are my errors I will happily donate £10 if you can help .
I placed into other thread but no help...
I have tried all across the net . all the tools also . ..
I am on 91.2.29001.xt890.retail.in.GB I flashed with rsd.....
Regards
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Try to restore with RDS TOOL.
Envoyé depuis mon XT890 avec Tapatalk
lebobo said:
Try to restore with RDS TOOL.
Envoyé depuis mon XT890 avec Tapatalk
Click to expand...
Click to collapse
I think that is tricky. If u restore it wrong(e.g. an ICS on jb) u get a bricked phone. Just be glad that it works. When unlocking it is likely to get the same image back. Until someone can find a good logo that won't mess up your phone there is noving we can do about it.
Sent from my XT890 using xda app-developers app
Hi people.. I tryied install CWM using this file, but dont work for me... When i go to recovery mode, only a android robot is show... Whats happend?
---------- Post added at 01:51 PM ---------- Previous post was at 01:43 PM ----------
Well, i tried using cmd and fastboot comando to put img recovery-razri-tryAtouch and works... but, you bat file should work's, or no?
Same here.... I am on JB 4.1.2
kye04 said:
Same here.... I am on JB 4.1.2
Click to expand...
Click to collapse
I too..
Copy the content of this Zip into the Flasher Folder and overwrite the original BAT
new version
Version 1.4 added. See first post.
Working?
Anyone tried new version? 1.3 didn't work for me. CWM is very slow, can someone tell if TWRP is faster and/or better?
Both of them are slow on x86 architecture... No workaround for thé moment...
Envoyé depuis mon XT890 avec Tapatalk
lebobo said:
Both of them are slow on x86 architecture... No workaround for thé moment...
Envoyé depuis mon XT890 avec Tapatalk
Click to expand...
Click to collapse
Hai Lebobo, how to copy & paste file or apk into system/app in TWRP? Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG-H870 OPEN EU 11G ROMHello everyone
LG rolled out a new update to 11G :good:.
Changelog from LG:
Code:
[Feature]
- Phone usability and functionality has been further improved
Changelog what I noticed and found:
Code:
*The God damm New Security Patch*
*Improvements in
-Camera
This zip is created from the original KDZ. I changed the Boot.img, so you do not have to reinstall TWRP. . .
I had made this for users who can not get ota's because they have Custom Recovery / Root installed
Sorry for my bad english i'm out of practice
Features *Stock build made from official KDZ
*Stock Build.prop
*Unrooted
*Boot.img modified to keep TWRP
*Remove dm-verity
*Remove forceencryptInstallation What you need *Unlocked Bootloader [How to do]
*Working TWRP installed [Link to official TWRP]
*When you need Root, Latest SuperSU [Download] or Magisk [Download]
*H870 11G OPEN EU (TWRP).zip [Download]
How to install Reboot to recovery using button combo or reboot app (need root)
Backup Dalvik,ART, Cache, System & Data (include not your internal memory) and Boot
in to your external sd or copy the backup from internal sd to your PC!
For clean install: Wipe Dalvik/ART, Cache, System and Data (Recommend)
You can also keep your data by dirty flashing the zip.
Flash H870 11G OPEN EU (TWRP).zip
Flash SuperSU or Magisk zip when you need root
Reboot System
At the first time you boot to system, it can be TWRP says No OS installed. You can ignore it.
If TWRP asks if you want to install SU, hit no
Here you can find my other [Downloads.] There are IMG´s, KDZ´z and more!
Rom Version
Android Version: 7.0
Android security patch level: 2017-11-06
Build date: 2017-11-13
Build number: NRD90U
MD5 SUMS:
Code:
[SIZE="4"][B][COLOR="Black"]boot.img 2e70c06d111fa30d33146de431b09fa3
modem.img 4a8d11f94f5025b4ec75edf253da617b
persist.img a5a3000725def460b093da63a78350e3
rct.img 15bc82584049ec3a7c62d921c2897267
system.img bd45fbeb67465441bd5e7e6c62b5c6e8
aboot.img 490068b3f40e5e226edb17c52073dc69
apdp.img 1c213128738cf9def34bae5227bc8815
cmnlib.img c345199826b80fe8caa0675a3e3a51ac
cmnlib64.img 59016c6592d8272468995592145ad9d4
devcfg.img 3f765c88820f5b334af379bc939e2ea1
factory.img 15bc82584049ec3a7c62d921c2897267
hyp.img 4d01c6137366b13e8ec15928602a6799
keymaster.img 31f0536634a689aceb575d41ceb6987e
laf.img c0596104264719135cfe2d5eb381d53b
msadp.img ccee3b49ffe6b7bafe00b62d9ed34d4b
pmic.img a2dfea3fe3db2c1dd750871261be94fd
raw_resources.img f9aa74c82c39fdd96220406c03419713
rpm.img 52e2b8944ced89162ac0416b27668937
sec.img 628756d1475c7e6ffa2f974c63261bf6
tz.img 996fb1881784b2a525ead3349fa668bf
xbl.img e43f35732557254e1ff2497a56240dd2[/COLOR][/B][/SIZE]
Credits:
@autoprime
@J0SH1X's
@Chainfire
@topjohnwu
@Me :laugh:
Don´t forget to hit the thanks-button if you like my work! :good:
You want to help me with a [donation?] Feel free to make it.
westwood24 said:
LG-H870 OPEN IL 11D ROMHello everyone
Many peoples ask me that i can make a zip
from 11D Israel KDZ. Here is it :good:.
Dosent Work my device is bootlooping in Recovery!
I Will Update the Post when i have a solution.
Sry Guys but im very busy. do not ask for ETA
Click to expand...
Click to collapse
Take your time, quality cannot be produced in a rush. Thanks for your efforts :good:
11f please
tnx bro i'm waiting v11g link
DamiDev said:
tnx bro i'm waiting v11g link
Click to expand...
Click to collapse
+1
Enviado desde mi LG-H870 mediante Tapatalk
---------- Post added at 05:38 AM ---------- Previous post was at 05:36 AM ----------
volteretero said:
+1
Enviado desde mi LG-H870 mediante Tapatalk
Click to expand...
Click to collapse
V11G is rhe last end oficial stock ? rom?
Enviado desde mi LG-H870 mediante Tapatalk
Hey, I have BL unlocked, custom recovery, root, I got an OTA update, I can update, if the phone breaks down? Will it be safer to install your ROM?
kaciek said:
Hey, I have BL unlocked, custom recovery, root, I got an OTA update, I can update, if the phone breaks down? Will it be safer to install your ROM?
Click to expand...
Click to collapse
You can not install an offical OTA with a custom recovery. But yes, you can safe your phone with one of this ROMs (I recomend EU 10T for recovery operations).
volteretero said:
+1
Enviado desde mi LG-H870 mediante Tapatalk
---------- Post added at 05:38 AM ---------- Previous post was at 05:36 AM ----------
V11G is rhe last end oficial stock ? rom?
Enviado desde mi LG-H870 mediante Tapatalk
Click to expand...
Click to collapse
released 19/11
i have downloaded it in my H870 ITC but i can't install it because i have custom recovery
Do you have the original boot.img? I would like to try the Magisk boot image patch install method so I can keep the original recovery image so I can get official OTAs more easily.
THX for wait.
Rom is UP.
I also plan to do make a deodexed version of it.
When you need it than leave a commit
Feel free to hit thanks and to donate
llucax said:
Do you have the original boot.img? I would like to try the Magisk boot image patch install method so I can keep the original recovery image so I can get official OTAs more easily.
Click to expand...
Click to collapse
H870 11G Boot.img
westwood24 said:
THX for wait.
Rom is UP.
I also plan to do make a deodexed version of it.
When you need it than leave a commit
Feel free to hit thanks and to donate
H870 11G Boot.img
Click to expand...
Click to collapse
How to reboot in recovery?
Thanks.
Edit: ok found. Turn on with power & volume up, when LG logo appears just unpressing power for a moment then press again.
data loss
Quick question: If I flash the zip will I keep my data?
I currently have the V10t-EUR-XX software installed and twrp.
Thanks in advance
Mirostock said:
Quick question: If I flash the zip will I keep my data?
I currently have the V10t-EUR-XX software installed and twrp.
Thanks in advance
Click to expand...
Click to collapse
If you dirty flash it yes, mind to make a backup just in case of problems that may occur
H870 11G Boot.img[/QUOTE]
Thanks! I finally installed Magisk via TWRP, but I would like to put back the official recovery image, again to be able to get official OTAs. Would it be too much to ask to upload the official recovery.img for v11g
I guess it should be safe to replace the TWRP recovery with the official one after Magisk is installed, right?
Thanks a lot!
llucax said:
H870 11G Boot.img
Click to expand...
Click to collapse
Thanks! I finally installed Magisk via TWRP, but I would like to put back the official recovery image, again to be able to get official OTAs. Would it be too much to ask to upload the official recovery.img for v11g
I guess it should be safe to replace the TWRP recovery with the official one after Magisk is installed, right?
Thanks a lot![/QUOTE]
If you're rooted it's not safe to do an OTA, it's more safe to keep the twrp in case of problems instead of the useless lg recovery.
llucax said:
H870 11G Boot.img
Click to expand...
Click to collapse
Thanks! I finally installed Magisk via TWRP, but I would like to put back the official recovery image, again to be able to get official OTAs. Would it be too much to ask to upload the official recovery.img for v11g
I guess it should be safe to replace the TWRP recovery with the official one after Magisk is installed, right?
Thanks a lot![/QUOTE]
recovery.img
Killua96 said:
Thanks! I finally installed Magisk via TWRP, but I would like to put back the official recovery image, again to be able to get official OTAs. Would it be too much to ask to upload the official recovery.img for v11g
I guess it should be safe to replace the TWRP recovery with the official one after Magisk is installed, right?
Thanks a lot!
Click to expand...
Click to collapse
If you're rooted it's not safe to do an OTA, it's more safe to keep the twrp in case of problems instead of the useless lg recovery.[/QUOTE]
Why it isn't safe if it's systemlessly rooted? Also I can always install TWRP when/if I need it.
llucax said:
If you're rooted it's not safe to do an OTA, it's more safe to keep the twrp in case of problems instead of the useless lg recovery.
Click to expand...
Click to collapse
Why it isn't safe if it's systemlessly rooted? Also I can always install TWRP when/if I need it.
Click to expand...
Click to collapse
It's not safe because it's possible that the OTA could mess around with other partitions too, i don't reccomand it, do whatever you want, i don't do OTAs since G2 in 2014, i've always made a clean install of the entire firmware to avoid any problems due to the update.
Which version of xposed should i flash? Anyone has xposed working on this Rom?
i have latest 11G update but i dont have wifi calling and VoLTE how to enable this options? or should i flash Orange kdz image ?
Hi Guys
Today i'm Presenting Tissot Suite V2.0
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features & Info:
-Veriffy the Deivce (ADB recognized)
-Unlock Bootloader
-Boot TWRP 3.2.1-2 Recovery
-Remove Bootloader Unlocked Warning
-Backup your Partitions
-Pull, edit, flash build.prop
- Pull apk from system
- Boot in Bootloader mode.
- Backup Modem to Internal Storage
- Flash Modem from Backup
- Reboot bootloader.
-Go to recovery.
-Reboot the Phone.
-Flash Partitions From Backup
-Restore Stock Original Splash Image
-Flash Stock Rom and Lock Your Bootloader Auto (You need to place the files in folder ,This is Beta Feature i Haven't tested yet...)
Instructions:
1.Unpack the Tools Zip
2.Run the Tissot_Suite.bat
3.Connect the Device
Download:
Get It
Issues:
I dont know of any, you tell me.
Donate:
You can Support This Project for Next Release with Paypal Donations for my Work ,List with People who Donated will be posted in this OP.
P.S If you like the Tool smash the Thanks Button
Enjoy!
XDA:DevDB Information
[TOOL][TISSOT]Tissot Suite V2.0 [Remove Boot Warning] [Bootloader-Unlock][Backup].etc, Tool/Utility for the Xiaomi Mi A1
Contributors
Alek Dev
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2018-04-14
Created 2018-04-14
Last Updated 2018-04-15
Changelog:
Version 2.0-Remove Bootloader Unlocked Warning
-Flash Partitions From Backup
-Restore Stock Original Splash Image
-Flash Stock Rom and Lock Your Bootloader Auto (You need to place the files in folder ,This is Beta Feature i Haven't tested yet...)
Version 1.0-First Release
Thank you so much dude.Hope you will be able to add imei flash and backup tool soon.:good:
You can add the feature to flash stock rom
Any Linux version
??????
Today coming new version with new feature to remove the Bootloader Unlocked Watermark [emoji6]
Sent from my Mi A1 using Tapatalk
Alek Dev said:
Today coming new version with new feature to remove the Bootloader Unlocked Watermark [emoji6]
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
Oh, wow. May I ask how is that possible?
UPDATE!!!:
Version 2.0-Remove Bootloader Unlocked Warning
-Flash Partitions From Backup
-Restore Stock Original Splash Image
-Flash Stock Rom and Lock Your Bootloader Auto (You need to place the files in folder ,This is Beta Feature i Haven't tested yet...)
Download:
Get It
Alek Dev said:
Today coming new version with new feature to remove the Bootloader Unlocked Watermark [emoji6]
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
Wonderfull,
May i ask how the tool proceed to remove the warning?
Alek Dev said:
UPDATE!!!:
Version 2.0-Remove Bootloader Unlocked Warning
-Flash Partitions From Backup
-Restore Stock Original Splash Image
-Flash Stock Rom and Lock Your Bootloader Auto (You need to place the files in folder ,This is Beta Feature i Haven't tested yet...)
Download:
Get It
Click to expand...
Click to collapse
Getting permission denied error while backing up partitions also I'm not able to pull apk from device it is also giving error
Midomad said:
Wonderfull,
May i ask how the tool proceed to remove the warning?
Click to expand...
Click to collapse
I make custom splash which removes the bootloader warning and the tool first erases the splash then updates with the new one... that's it
Sent from my Mi A1 using Tapatalk
gthakur said:
Getting permission denied error while backing up partitions also I'm not able to pull apk from device it is also giving error
Click to expand...
Click to collapse
Run as Admin the Tissot suite bat also enable developer options and check Allow usb debugging that will work you will get some prompt and check that Yes
Sent from my Mi A1 using Tapatalk
Alek Dev said:
Run as Admin the Tissot suite bat also enable developer options and check Allow usb debugging that will work you will get some prompt and check that Yes
Click to expand...
Click to collapse
Sir getting this type of error while pulling apk from bat file . I am running it as administrator.
Thanks for your time
gthakur said:
Sir getting this type of error while pulling apk from bat file . I am running it as administrator.
Thanks for your time
Click to expand...
Click to collapse
Thank you i will check and fix[emoji6]
Sent from my Mi A1 using Tapatalk
Remove Bootloader Unlocked working fine..
Thanks for the Tool
Nice.. thanks for sharing buddy
try removing unlock bootloader splash, and it work.
But the animations is to slow, not blink up like stock.
gusbalaa said:
try removing unlock bootloader splash, and it work.
But the animations is to slow, not blink up like stock.
Click to expand...
Click to collapse
Yeah stays black at the part when says Bootloader warning this is the reason i was thinking to replace that part but it's very hard...
Sent from my Mi A1 using Tapatalk
Thanks for this! I do have 2 concerns.
1.
Code:
adb reboot bootloader
TIMEOUT /T 10 /NOBREAK
Is not necessary. Issuing a fastboot command will wait for the device to get into fastboot and will perform the command once it's there.
2.How were you able to fix the splash.img? Some folsk were trying to get the bootloader unlocked warnings removed but no one has succeeded so far. I'll try out your splash image a bit later to see if it's removed all of them.
Edit - Yes, it did remove all bootloader warnings.
Project continues here with oreo: https://forum.xda-developers.com/mi-a1/development/rom-miui-10-mi-a1-epic-mod-t3879804
Code:
include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Do not report bugs to Xiaomi, this is a NON official MIUI rom!
Do not report bugs here if you have not installed step by step according installation instructions!
Old thread: https://forum.xda-deveopers.com/mi-a1/development/wip-miui-9-mi-a1-t3788854
After long time, I manage to port MIUI for Mi A1 for dayly use.
I used xiaomi.eu for port and added some customization from Epic Rom
If you want to stay up to date from Epic roms, join telegram group: https://t.me/epic_roms
What works?
All I have tested
What doesn't ?
-On a small amount of devices, touchscreen is not working properly (touchscreen driver issue)--> fixed on test version
-Reading mode does not turn off if selected. You should reboot or manually move lower slider to left.
-Some apps does not illuminate notification led such as missed call and others. This is a beta base bug, not due to port.
-If you are not familiar with MIUI, do some research before posting a bug, the thread is plenty of reported bugs that are miui settings related.
Features
Android version 7.1.2
Rom built in @mohancm TWRP (you don't need to flash)
AROMA installer with center clock, dpi and gps.conf selections
Base xiaomi.eu 8.11.1 https://xiaomi.eu/community/threads/8-7-12-v2.44949/
Added Epic MIUI Mods such a:
Rooted with magisk 17.1
OTA updates available on 8.9.13 and subsequent
Advanced Reboot
Select rows and columns on launcher
More tiles to UI
Third party theme support
Face unlock
A-GPS extra settings
Pico gapps
Advanced reboot
Tweaks
...
Downloads
https://sourceforge.net/projects/ep.../Epic_Miui10_8.10.25-_MiA1-AROMA.zip/download
People who has half display touchscreen bug can install this version: https://sourceforge.net/projects/epic-rom/files/MiA1/Test/
-Goodix fingerprint not working on test version
Installation
Pre-requisites:
Unlocked bootloader
TWRP installed
First time installing MIUI, and ONLY FIRST TIME:
Back up all your data from internal storage, in next step will be erased
Fastboot flash stock tissot rom https://en.miui.com/download-333.html if you are not on stock rom
Reboot and let GPS lock one time
Fastboot flash userdata from Mi5x nougat with command
Code:
fastboot flash userdata userdata.img
download userdata img from --->https://www.androidfilehost.com/?fid=746163614322263787
Reboot to recovery
Flash MIUI ROM
Reboot and enjoy
First boot takes 10 minutes
If in first boot don't ask for your PIN, lock and unlock display
If your storage is less than normal, reboot to recovery, format data and reboot to system
Updating from previous MIUI:
Reboot to recovery and flash ROM, no wipes needed
If face bugs, wipe data and install again
PD: ota service are not working properly so, if you download from ota you should install manually once the app reboot to recovery, which means you have to install downloaded rom from internal sd card/OTA_updates folder
Contributors
pocaropa
Xiaomi.eu for base rom used, thanks guys
F.A.Q
Why GPS/sensors are poor/slow/? Why I have other bugs non mentioned here?
You need to install ROM according installation instructions
Is required some specific firmware?
I have installed over 8.1 stock rom, I haven tested others
How to back to stock?
Restore your TWRP backup
Can I install a custom kernel?
You will break your WiFi, camera and more... maybe in a future
When do you update the rom?
When I have free time and I feel like doing it. Please don t ask for ETAs
Can you add x or y feature to the rom? Can you port from x miui rom?
No [emoji14]
VOLTE works?
Yes
Don't ask for porting question, just see old thread, ok?
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like please hit thanks a consider a donation; just open Ota updates app and you will see donate button. This makes me motivated, thanks!!
Amazing work, buddy!
Nice work
Link is not working.
Anyway, you are a god.
Edit: link is working, downloading right now
Wysłane z mojego Mi A1 przy użyciu Tapatalka
thanks my brother for the wonderful job.
Hey, great job on this, haven't tested it myself but we all appreciate your work on this!
Is there a possibility for a "cleaner" variant of this? (a version without the mods mentioned in the OP)
Personally I'd give that a try and I'm sure more people would want that as well.
Once again, thanks for working on this!
Cleaner?
Xiaomi.eu is a debloat miui custom and others are a "desired" features.
michkost858 said:
Hey, great job on this, haven't tested it myself but we all appreciate your work on this!
Is there a possibility for a "cleaner" variant of this? (a version without the mods mentioned in the OP)
Personally I'd give that a try and I'm sure more people would want that as well.
Once again, thanks for working on this!
Click to expand...
Click to collapse
Enviado desde mi MI A1 mediante Tapatalk
pocaropa said:
Cleaner?
Xiaomi.eu is a debloat miui custom and others are a "desired" features.
Enviado desde mi MI A1 mediante Tapatalk
Click to expand...
Click to collapse
Yeah, some people might not want to use root and gapps or things mentioned in the OP.
I think you would get a greater response from the users if a variant like that existed.
Flashing user data. Img is really necessary?
Feel free to removed what you want. Rom is "as is".
Enviado desde mi MI A1 mediante Tapatalk
Absolutely, but only first time.
kolpomanob said:
Flashing user data. Img is really necessary?
Click to expand...
Click to collapse
Enviado desde mi MI A1 mediante Tapatalk
pocaropa said:
Absolutely, but only first time.
Enviado desde mi MI A1 mediante Tapatalk
Click to expand...
Click to collapse
can i dual boot it afterwards?
Wow great sir
Couple of questions:
1. Do I have to remove treble support?
2. Do I have to fastboot flash Mi A1 img if I want to go back, if yes provide please. If not is it required to revert to complete stock after this.
3. Do traditional kernels work in this port?
How to flash userdata.img ??
Great!
pocaropa said:
Absolutely, but only first time.
Enviado desde mi MI A1 mediante Tapatalk
Click to expand...
Click to collapse
can i dual boot it
Damn what a great job here, we finally have MIUI option on this phone.
It would be just amazing if we would have a fully functional 8.1.0 port of miui 10 for this device anyhow many great tanks to the dev for this one:good: maybe in the future we will have just that amazing once again keep it up!
It shows I have 6gb of free storage out of 16gb?
I have 32gigabytes of internal storage, is this some kind of bug or what?
PROJECT ABANDONED, thanks everybody for trusting me!! See you!
Code:
include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Do not report bugs to Xiaomi, this is a NON official MIUI rom!
Do not report bugs here if you have not installed step by step according installation instructions!
Previous Nougat miui rom -->: https://forum.xda-developers.com/mi...2-epic-mod-t3842031/post77612030#post77612030
We used xiaomi.eu for port plus some customization from Epic Rom
If you want to stay up to date from Epic roms, join telegram group: https://t.me/epic_roms
What works?
All I have tested
What doesn't ?
-FM Radio no sound
-Miui Sound Enhacer Fixed on 8.12.8
-Stock Camera Fingerprint Shutter Fixed on 8.12.8
-Greenish pictures for third party apps Fixed on 8.12.7
-If you are not familiar with MIUI, do some research before posting a bug, most of bugs reported are MIUI settings related
Features
Android version 8.1.0
Rom built in TWRP (you don't need to flash)
Base xiaomi.eu 9.1.17
Added Epic MIUI Mods such a:
Rooted with magisk 18.0
OTA updates available on 8.9.13 and subsequent
Advanced Reboot
Select rows and columns on launcher
More tiles to UI
Third party theme support
Face unlock
A-GPS extra settings
Pico gapps
Advanced reboot
Tweaks
...
Downloads
ROM:https://sourceforge.net/projects/epic-rom/files/MiA1
Fix for stock MIUI portrait mode: if you are going to use mi account, login into it before install this fix. You can find on app ota_updates/addons
Installation
If you are on stock Pie do not install this Rom, otherwise you can brick your phone. See how to downgrade to stock oreo.
Coming from any rom
1-Back up all your data including efs
2-Wipe data and dalvik/Art
3-Flash Rom zip. first boot takes about 15-20 minutes
4-When system boots up, wait 5 minutes to do initial configuration
5-You will feel system "laguiss" during initial setup, after you complete, wait 5 minutes more and reboot
6-Flash MIUI portrait fix ONLY after log into your Mi account ( skip thius step if you do not use Mi account)
Enjoy MIUI
If system does not boot after 25 minutes:
Fastboot flash userdata with command
Code:
fastboot flash userdata userdata.img
download userdata img from --->https://www.androidfilehost.com/?fid=746163614322263787
Reboot to recovery
Flash MIUI ROM
Continue from step 4
If your storage is less than normal, fastboot flash userdata again and reboot
PD: ota service are not working properly due to a/b partition so, if you download from ota you should install manually once the app reboot to recovery, which means you have to install downloaded rom from internal sd card/OTA_updates folder
Contributors
pocaropa
Manish Pathak (@leetcool), thanks for helping in fixing bugs, it would not have been possible without your help
Xiaomi.eu for base rom used, thanks guys
F.A.Q
Google camera is not working?
Enable hal3 via magisk module or find build.prop line "#persist.camera.HAL3.enabled 1" and delete "#". Reboot.
Is required some specific firmware?
Rom is built in firmware from stock november
How to back to stock?
Restore your TWRP backup
Can I install a custom kernel?
You can install oreo kernels which are suitable for stock rom
When do you update the rom?
When we have free time and I feel like doing it. Please don t ask for ETAs
Can you add x or y feature to the rom? Can you port from x miui rom?
No [emoji14]
VOLTE works?
Yes
Don't ask for porting question, just see old thread, ok?
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like please hit thanks a consider a donation; just open Ota updates app and you will see donate button. This make us motivated, thanks!!
Finally OREO Miui 10 for our Tissot, thank you OP
Sent from my Mi A1 using Tapatalk
Awesome work man :good: :victory:
i updated from previous miui rom. its now asking for a reset and a decryption pa
ssword in recovery what to do?
Gonna download now
After flashing the userdata, the rom start working fine , but my internal storage was 16gb , do the format data > flash magisk v18 > and then reboot system. Stuck at EpicROM splash.
What should i do ?
Can we flash it on a trebilised device?
Since non treble ROMs work on treble devices too , will this rom work??
Thank you so much for your hardwork. MIUI epic rom has been my daily rom since Nougat.
Anyway, I have problem with the slow download link from SourceForge.net, get only around 100KB/s. Any chance for a mirror?
Thank youuu
nakchea said:
Thank you so much for your hardwork. MIUI epic rom has been my daily rom since Nougat.
Anyway, I have problem with the slow download link from SourceForge.net, get only around 100KB/s. Any chance for a mirror?
Click to expand...
Click to collapse
Use 3rd Party Downloader Application (recommended : IDM for Android and Internet Download Manager (i know its not free, but have 30 days trial) for Windows)
Close the page if the download is locked and handled by that 3rd Party Download App
enjoy high speed
YESSS! Stock feels so boring.
PORT the MIUI PIE BASED on pocophone
bagusmfski01 said:
After flashing the userdata, the rom start working fine , but my internal storage was 16gb , do the format data > flash magisk v18 > and then reboot system. Stuck at EpicROM splash.
What should i do ?
Click to expand...
Click to collapse
Try flashed again userdata and reboot. Wait until 35 minutes and report please
Enviado desde mi MI A1 mediante Tapatalk
To Anyone have 16GB storage issue
- Flash the rom first, no matter what userdata are you using
- complete the setup
- Reboot to Fastboot your device (Hold power button > Reboot > Bootloader)
- if you have stock tissot userdata, follow this
1. open fastboot rom (folder, make sure you're already extract the zip and zip)(make sure you have download that)
2. open images folder, then find userdata
3. move that to ADB Installation File
4. type this > fastboot flash userdata userdata.img < (just type the fastboot flash userdata userdata.img)
5. Reboot, by typing fastboot reboot
6. check that, if still not match with your device variant (ex : shows 32GB, but your device is 64GB variant), reflash again
- if you have Mi 5X Userdata, follow steps number 4,5,6 but change the userdata file with your own Mi 5X Userdata
starkproject said:
Use 3rd Party Downloader Application (recommended : IDM for Android and Internet Download Manager (i know its not free, but have 30 days trial) for Windows)
Close the page if the download is locked and handled by that 3rd Party Download App
enjoy high speed
Click to expand...
Click to collapse
Thank you. IDM on Android works great for me, up to 1.6MB/s
Help
Hello, I come from MIUI 7.1.2 Epic Rom 8.11.1, I did all the steps, but it does not start the system, they spend like 25 minutes or less and the cell phone restarts and starts and another 25 and restarts, you know what happens? What I can do?
greenis said:
Hello, I come from MIUI 7.1.2 Epic Rom 8.11.1, I did all the steps, but it does not start the system, they spend like 25 minutes or less and the cell phone restarts and starts and another 25 and restarts, you know what happens? What I can do?
Click to expand...
Click to collapse
Flash userdata.img, reboot to recovery and flash the rom again
Enviado desde mi MI A1 mediante Tapatalk
pocaropa said:
Flash userdata.img, reboot to recovery and flash the rom again
Enviado desde mi MI A1 mediante Tapatalk
Click to expand...
Click to collapse
Done, Now i have this How to fix the 16Gb? Can you help me how can I fix it? :llorando:
greenis said:
Done, Now i have this How to fix the 16Gb? Can you help me how can I fix it? :llorando:
Click to expand...
Click to collapse
See comment #14
Enviado desde mi MI A1 mediante Tapatalk
Thanks Developer for your hard work
I will have a try asap
Already downloaded