*** THIS KERNEL ONLY SUPPORTS SAMSUNG TW JB 4.1.2 ROMs (STOCK and CUSTOM). DOES NOT WORK IN CM or AOSP!!! ***
*** The Kernel is Safe (MMC_CAP_ERASE disabled) and the included PhilZ Recovery uses delete recursive and avoids brickbug ***
*** Stiil, I take no responsibility if the provided KERNELs causes any problem to your phone, you are warned! ***
Hello Friends,
I am no developer, just an Android lover. I share with you my first custom kernel for Note N7000 JB building from sources. It was made mainly for my hobby and my own needs, but hopefully can be useful to other members.
Forest-HelloWorld-Make-II kernel
As the name suggested, it is essentially a continuity of the C.O.H HelloWorld kernel.
FEATURES:
Features added by me:
- Implement r3p1 GPU driver to JB4.1.2 (from V2.0.0 (Credits and thanks to @GeeckoDev for this excellent work)
- OC OLED panel refresh rate to 60 (from V1.9.1)
- Remake GPU to 4 steps (V_1.9.0) (Very capable for gaming why maintain good battery life)
- Compile using Linaro toolchain 4.7.4.(12.2013) (V1.9.0) (it feels silky smooth)
- Update recovery to PhilZ Touch 5! You have a more beautiful and intuitive GUI. (from V1.8.2)
- Use LZMA compression (from V1.8.2).
- BLN support (only for V1.7.3)
- Enable OC CPU to 1600 (from V1.6.4 for OC CPU versions)
- Exfat native support (Now you can enjoy unlimited file size and fast speed on ext-sdcard)
- Kernel linux version 3.0.31, build using Ubuntu 13.10
- Toolchains: CodeSourcery G++
- Some optimization of the config file
- Su binary is updated to the latest version.
- Made three versions: 1) With OC of both CPU and GPU 2) With stock CPU and OC GPU and 3) With stock CPU and GPU.
Features benefited from C.O.H kernel:
- CPU Hotplug support from Speedmod kernel (only 1 core when not in load, battery friendly)
- Disabled logcat and dmesg and unnecessary Samsung debugging.
- UV capability.
- Increased Touchscreen sensitivity even when charging (Best touch response to date in Note).
- FSYNC Control 1 (from Ezekeel's GLaDOS kernel for Nexus).
- Tweak GPU in GPU OC version: 133, 267, 400 MHz (3 steps),
- Many cpu governors and schedullers: Defaults are Hyper-Row now (You can also tried noop-pegasusq as recommended by C.O.H)
- Fix for wifi drain on standby (disabled all multicast).
- Speedmod K5-3 fixes included
- Other features are the same as in c.o.h’s HelloWorld Kernel.
-------------------------------
HOW TO ENABLE LOGCAT (Only for V1.6.4 and lower!) .Credits to @hardcore:
If you want to re-enable logcat for whatever reason, do this:
adb shell
su
mount -o remount,rw /system
echo ANDROIDLOGGER >> /system/etc/tweaks.conf
mount -o remount,ro /system
exit
Reboot android system. Then can take logcat as you wish!
--------------------------------
The kernel is very smooth, stable and battery friendly.
CHANGELOGS:
HelloWorld-Make-II-V201-P:.
- OC-CPU
- Stock GPU
- Compile using uber toolchain 4.7
Excellent speed and good battery life. This is my current most favorite one.
HelloWorld-Make-II-V2.0.1:.
- Stock GPU and CPU.
- Compile using uber toolchain 4.7
Excellent speed and good battery life. This is one of my favorites.
- Change logs of other versions: see links in download section!
HelloWorld-Make-II-V1.9.0:.
- Remake GPU steps
+ Forest_HelloWorld-Make-II_V1.9.0_AM1 which is more agressive with GPU steps: 133-267-333-400
+ Forest_HelloWorld-Make-II_V1.9.0_GL2 which is more gracious, gentle with GPU steps: 133-200-267-333
- Disable UV interface.
HelloWorld-Make-II-V1.8.2:.
- Update Philz recovery to PhilZ Touch 5.
- Putting back logger module with option to enable it (for those who want to get logcat)
- Use LZMA compression
- Set default Governor to Pegasusq
- Update su and SuperUser to V1.94
- BLN dropped!
Bugs:
- The OC-CPU version has stock video bug the same as V1.6.4. Use MX video play instead!
- Recovery only accept to format internal and external sdcard using default format.
HelloWorld-Make-II-V1.7.3:.
- BLN support added.
HelloWorld-Make-II-V1.6.4:.
- OC CPU to 1600 (you can enable it using Nofrills or SetCPU...)
- UV 25mv for each steps, for balance performance and battery life.
- Include VR I/O scheduler, leave out Deadline
- Tweak thermal threshold (first level from 64 to 70, second level threshold keep the same).
Significant improvement for heavy games: I can play my favorite Let's Golf 3 super smooth now.
Bugs: stock video only play from gallery. Use MX video which is much better, btw.
HelloWorld-Make-II-V1.5.5:.
- Leave out some Governors, keep only 5: Hyper, Performance, Ondemand, Pegasusq, and SmartassV2.
- Leave out I/O Schedulers, keep only 5: Row, Sio, Noop, Cfq and Deadline.
- Padding zImage to the full size of the Kernel partition, 838808 bytes (Thanks to the trick by Chenglu and PhilZ!) this should help make the flash of kernel always clean.
- other minor tweaks
The new version is leaner, lighter. Should help improve performance and battery life!
For those who is on V1.4.5 it is recommended that you move to V1.5.5
HelloWorld-Make-II-V1.4.5: Starting version
DOWNLOADS:
Forest-HelloWorld-V201-P.zip_with Trim, stock Gpu and OC-CPU (1600 Mhz) My favorite
V2.0.1_with Trim, stock Gpu-Cpu:
V2.0.0_Extreme_with Trim and FPBug fix: Announcement and downloads: http://forum.xda-developers.com/showpost.php?p=58408389&postcount=706
V2.0.0_Extreme_Spen: This is a version without OC OLED panel (sung original 57Hz) for S-pen users.
http://forum.xda-developers.com/showpost.php?p=57752642&postcount=691
V2.0.0_Extreme and V1.9.1_Extreme announcement and downloads link:
http://forum.xda-developers.com/showpost.php?p=57652736&postcount=670
V2.0.0_Ultimate: announcement and download link:
http://forum.xda-developers.com/showpost.php?p=57467024&postcount=627
V2.0.0 annoucement and downloads links here
V1.9.1 announcement and download here
V1.9.0 from this post: HelloWorld-Make-II-V1.9.0:
HelloWorld-Make-II-V1.8.2:
1. OC both CPU-GPU:
http://www.mediafire.com/download/njhvzewi2ncl5q5/Forest-HelloWorld-Make-II-V1.8.2.zip
2. OC GPU only:
http://www.mediafire.com/download/po1iefn2dbaajtu/Forest-HelloWorld-Make-II-V1.8.2-OC-GPU(2).zip
3. Stock CPU-GPU:
http://www.mediafire.com/download/lfzab4oc8tb5bit/Forest-HelloWorld-Make-II-V1.8.2-stock-GPU-CPU.zip
HelloWorld-Make-II-V1.7.3::
Download link and instructions go to this post:
http://forum.xda-developers.com/showpost.php?p=51235523&postcount=265
HelloWorld-Make-II-V1.6.4:
http://www.mediafire.com/download/1sum6rn4sw81qdp/Forest-HelloWorld-Make-II-V1.6.4.zip
------------------------------
HelloWorld-Make-II-V1.5.5:
1. With Stock GPU:
http://www.mediafire.com/download/fhl2f2et527vydf/Forest-HelloWorld-Make-II-V1.5.5-StockGPU.zip
2. With OC-GPU:
http://www.mediafire.com/download/b3hu47yyzltey1p/Forest-HelloWorld-Make-II-V1.5.5-OC-GPU.zip
------------------------------
HelloWorld-Make-II-V1.4.5 (pulled in favour of the better version just out)
1. With Stock GPU:
2. With OC-GPU:
INSTALLATION:
1. Flash the attached kernel CWM flashable zip using any SAFE custom recovery like PhilZ kernels.
2. Wipe cache and dalvik cache and reboot.
3. Enjoy. (it takes around 2-3 reboots to the ROM and KERNEL to settle down and get really fast and smooth.
CREDITS AND THANKS:
1. @crime_of_heart : (huge) for too many things
2. @Philz3759: for his wonderful touch recovery
3. @Chenglu for his guide on Initramfs
4. @GeeckoDev for taming r3p1 driver for JB 4.1.2
5. @dorimanx: for his sharing of exfat source code
6. @Dharam_Maniar: for his excellent Tutorial on kernel
7. @hardcore: for the inspiration from his excellent work
8. @maxfu for his great work on OC kernel
9. @Chainfire for his excellent su and superuser.apk
10. Samsung, for the source code for me to play with
11. And many other excellent members in XDA!
For Developers/Modders: You can use the Forest-HelloWorld-Make-II kernel in your CUSTOM ROMs as long as you give links to this thread.
Please THANKS me and C.O.H if you think this kernel is helpful for you!
Source:
Kernel is built from Samsung JB source can be downloaded from Sam Sung open source at: http://opensource.samsung.com/ (EUR: GT-N7000_JB_Opensource.zip)
Modification is made using the patch from COH: can be found in his thread: http://forum.xda-developers.com/showthread.php?t=2252977
Exfat source code: https://github.com/dorimanx/exfat-nofuse
Reserved
Good stuff @forest1971
Thanks
nokiamodeln91 said:
Good stuff @forest1971
Thanks
Click to expand...
Click to collapse
Thanks NokiaModeln91!
It is harder than I thought building a custom kernel from source, and unpacking Initramfs from zImage. I am very happy I made it.
Try it our! I find it really good indeed!
Anyone flash this kernel im on sweetrom 10.5 with speedmod k5
---------- Post added at 01:07 PM ---------- Previous post was at 01:06 PM ----------
forest1971 said:
Thanks NokiaModeln91!
It is harder than I thought building a custom kernel from source, and unpacking Initramfs from zImage. I am very happy I made it.
Try it our! I find it really good indeed!
Click to expand...
Click to collapse
U post same link two time no oc kernel there only stock gpu chek before posting thx
SAINI99 said:
Anyone flash this kernel im on sweetrom 10.5 with speedmod k5
Click to expand...
Click to collapse
I am using sweet rom 10.5 myself. Have tested out for last few days. So smooth!
Sent from my GT-N7000 using Tapatalk 2
Great work I can't try it atm. as I am on a stable OmniROM which I have had for a month but once this breaks I will give it a go
Are there any plans to add more tweaks?
XxPixX said:
Great work I can't try it atm. as I am on a stable OmniROM which I have had for a month but once this breaks I will give it a go
Are there any plans to add more tweaks?
Click to expand...
Click to collapse
The features are extensive so I do not know if there will be further. Lets see.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
The features are extensive so I do not know if there will be further. Lets see.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Provide the oc one links are same chek the main thread mr forest
SAINI99 said:
Provide the oc one links are same chek the main thread mr forest
Click to expand...
Click to collapse
My bad . Thanks for pointing that out. Links are corrected now.
forest1971, quick question. How can i edit mount points ? Example, /system is mounted in /dev/whatevah and i want to change that. Is it possible ?
You can find mount points in the guide in my signature.
Btw, the question is not relevant in this thread.
Sent from my GT-N7000 using Tapatalk 2
Thanks for your work. I see big developers in credit section already. I'm definitely going to give it a shot.
Sent from my SM-N9005
Great work i flashed last night stock gpu one running smooth now lets see how much screen on time on this kernel i will get
With speedmod k5-5 i m getin 5 hours with wifi on
---------- Post added at 04:30 AM ---------- Previous post was at 04:01 AM ----------
I m getin 30 min screen on time for 15 percent battery level cost
This mean maximum i can get 4 hours screen on time
Please make speed mod k5-5 make 2
With updated recovery and with cpu governers and leave all same as it is
This will be a perfect kernel for those people who wna spend life little bit more with note without charge
SAINI99 said:
Great work i flashed last night stock gpu one running smooth now lets see how much screen on time on this kernel i will get
With speedmod k5-5 i m getin 5 hours with wifi on
---------- Post added at 04:30 AM ---------- Previous post was at 04:01 AM ----------
I m getin 30 min screen on time for 15 percent battery level cost
This mean maximum i can get 4 hours screen on time
Please make speed mod k5-5 make 2
With updated recovery and with cpu governers and leave all same as it is
This will be a perfect kernel for those people who wna spend life little bit more with note without charge
Click to expand...
Click to collapse
Speedmod k5-5 seems to be the benchmark for performance and battery life. I suspect too many governers and schedullers may harm the battery life. I will make a new ones with only few of them.
Still, kernel takes time to settle down with rom. So it is still too early to judge. Cheers.
Sent from my GT-N7000 using Tapatalk 2
this kernel support crt animation and boot animation? thanks
via MyOwnName™ device
Boot animation, yes. CTR animation, not tried yes. You may want to try in your rom and lets know. Tks.
Sent from my GT-N7000 using Tapatalk 2
Hey after a half day this kernel love my phone gitin full 5 hours of screen on time big thx man
Sheduler sio changed
Uv all cpu steps and gpu by -100
Cpu governer pagasq
SAINI99 said:
Hey after a half day this kernel love my phone gitin full 5 hours of screen on time big thx man
Sheduler sio changed
Uv all cpu steps and gpu by -100
Cpu governer pagasq
Click to expand...
Click to collapse
Good to know you like it and thanks for sharing UV settings! It should get even better with my next version.
Sent from my GT-N7000 using Tapatalk 2
Battery Test Complete
Related
[KERNEL] [2.6.29.6] [Flashable-.zip] [LAGFIX][BFQ][Oc][Uv] #3 "Patches 'O Klick"
So after countless hours of failure, I finally found my issue. It was an embarrassing one, but O well. What we have here is a fully stable kernel for the Vibrant. I have spent many hours on this and have been running it on my vibrant for some time now. Be sure to read the changelog for full info. At 1.2 Ghz I was getting MFLOPS scores pushing 10 MFLOPS! Performance is surely nice on this one. Another thing to note is the undervolting on my kernel. This will give optimal battery life for users. So, please enjoy, and post and errors with a logcat
This is compiled for the stock ROM. It will work on FrankenTwiz, Bionix, and many ROMs. Let me know what ROMs you try it on, and what ones it works best with.
hurrpancakes said:
This would be my first time using an oc/uv kernel. I know to get the oc, I have to go into setcpu and put the scaling to conservative, which I've already done. Ran quadrant, and got a score of 2790!
Great kernel!
Click to expand...
Click to collapse
mygti02 said:
wow......this kernel is amazingly fast......screw quadrant....mine is only coming up in the 900's but its way faster than the last lag fix i was using that was giving me 2700+ ratings in quadrant.
Great job!!
Click to expand...
Click to collapse
Instructions:
- Download the latest .zip provided below
- Put it on the root of your storage (the 14Gb one)
- Go into ClockWork Recovery
- Flash the .zip like you would a ROM
- Reboot
ENJOY!
Credits: Cyanogen, Wesgarner, Euegene_373, Barakinflorida
Download: http://kingxklick.com/forum/viewtopic.php?f=27&t=230
All my code is on
As you would expect, I am not responsible for anything that happens to your device
If you like my work follow me on Twitter:
CFS Changelog
Kernel #3
- NOW patched up to 2.6.29.6 from .29 (In settings it will still read as just 2.6.29)
- Many bug fixes to the kernel itself from the linux project
- Numerous patches to the CPU scheduler 'CFS' which we are currently using
- *NEW* 'Interactive' CPU Governor (You can enable this in SetCPU)
- Bluetooth patch: Enter active mode before establishing a SCO link. *thanks for finding the code Wesgarner*
- Root UID 0
- Root GUID 0
- AUFS2 standalone patches *via Cyanogen*
- Built with Cortex-a8
- Compiled with Neon Optimizations
- Using CT-NG toolchain *optimized for our CPU's*
- IPv6 fixes via mainline
- Netfilter tether: Fix unaligned memory access
- Netfilter stability enhancements *all via mainline, thank them*
- Much more I will add
Kernel #2
- Implemented "Speedy King Lag Fix"
- Some more voltage tweaks since it is going well
- NEW 'Interactive' Governor support
- Conservative governor tweaks (via Herver)
- Touchscreen is more responsive
- Compiled with optimizations (forgot to do this on #1)
- Compiled with neon opt
- Kernel compacted a little
Kernel #1
- Based off of Samsung Kernel Source
- Overclockable up to 1.2 Ghz! (thanks for the code unhelpful)
- Undervolted mid range frequencies for long battery life!
- Bluetooth patches (via Nick Pelly)
- Capped boot speed at 1 Ghz
- Using CFS CPU scheduler
- Added NEW BFQ I/O scheduler support! (thanks dark)
- Added CGROUPS block for BFQ
- BFQ scheduler set to default
- Anticipatory scheduler support
- Deadline scheduler support
- CFQ scheduler support
- Noop scheduler support
- Conservative CPU Governor set to default
- Ondemand CPU governor support
- Userspace CPU governor support
- Added support for EXT4 filesystems
- More I will add
thanks man, nice to have something we dont' have to flash in Odin
Great work!
Nice to see you in the vibrant neck of the woods king. I'll give this a shot in the morning. If I'm not going to oc will I notice much of a difference between this and the stock kernel?
Cyanogen, King...feel right at home coming from a 32B phone.
Paging Dr B said:
Nice to see you in the vibrant neck of the woods king. I'll give this a shot in the morning. If I'm not going to oc will I notice much of a difference between this and the stock kernel?
Click to expand...
Click to collapse
most definately, overclocking should be fairly stable though, ftw
kingklick said:
most definately, overclocking should be fairly stable though, ftw
Click to expand...
Click to collapse
is this cool too flash with the leaked JI2 Rom?
cdw9800 said:
is this cool too flash with the leaked JI2 Rom?
Click to expand...
Click to collapse
as long as samsung has not changed anything vital in their initramfs we should be just fine !
kingklick said:
as long as samsung has not changed anything vital in their initramfs we should be just fine !
Click to expand...
Click to collapse
ok ima give it a shot and report back
This is gonna sound noob but here it goes. I've never done research on what exactly kernels are and this is all new to me.
This new kernel I can flash like Rom will over clock my device to 1.2ghz or will it give me the option to? Can overclocking hurt my device in the long run?
Does this come with tools to over and underclock when I need to?
Any other info would be great. I'm on Eugene Franklin twis v2, no voodoo or lagfix yet.
Any other info would be awesome.
Sent from my SGH-T959 using XDA App
Works awesome on Frankin-Twiz update 1
buttery smooth
Works with Bionix
Installed, booted fast. Thanks for your hard work.
Good to see you back, King! Do you think this will work ok on Eugene's Hybrid R3? Also, I know some Vibrants (like mine) didn't like jacs OC kernel. Same issues here, or did the undervoltage kernel fix it?
Sent from my SGH-T959 using XDA App
Can we have info on how to revert this kernal back to stock if needed?
Very nice, glad to see another person compiling Vibrant kernels. Have you considered including the voodoo beta4 in one of your future builds?
Working fine on Vibrant 9
Will this work with a lagfix already installed?
What does the bluetooth patch do? I'm hoping improved A2DP quality, please say its so
Sent from my SGH-T959 using XDA App
so.. is it working with JI2?
all4degame said:
Can we have info on how to revert this kernal back to stock if needed?
Click to expand...
Click to collapse
You should just be able to flash it through recovery. It's available as a flashable zip in one of Eugenes threads.
Sent from my SGH-T959 using XDA App
Summary:
Well I went ahead and jumped into the Kernel world. This Android stuff is like crack lol While there are other great options as far as Sense kernels go such as Chad's I wanted to make one that I can call my own something that will be stable on all devices and is optimized for speed and stability while also providing good battery life. Going forward I will be using my own kernels with all 3 of my Rom projects.
Features Include:
Compiled from latest Htc Source Code: 2.6.32.17
BFQ I/O Scheduler NEW in #7
BFS Scheduler Only in #5 and #9
SD Card Speed Fix Patch NEW in #9
3-10 Multi-Touch Support - Included in #6 & #7
Disabled Kernel Debugging for increased performance NEW
in #7
Disabled Kernel File System Debugging for increased performance NEW in #8
Advanced Power Management Enabled
NEW Htc Boot Performance Enabled
NEW Htc Performance Profiles Enabled:
Screen "OFF" Speeds set Automatically: Minimum 245000 Maximum 245000
Stock Speeds
Default Governor Profile "On Demand"
All Governor Profiles Enabled
CIFS Support (Modular)
TUN Support (Modular)
Ext4 Support (Modular)
Wireless N Support (Modular)
READ ME:
I Recommend NOT using SetCPU with any of my kernels let the CPU governor do it's thing. All of what makes my kernels special is equipped out of the box and does not need assistance from SetCPU
Credits:
Koush: For his Any Kernel Updater
chad0989: Guidance
tchebb: 3-10 Multi-Touch Patch
All of You: For all of the faithful HeyItsLou users for your support, encouragement and great ideas!
Disclaimer:
I don't have one use at your own risk
Installation
Flash in recovery just as you would a Rom
For anyone having issues or as a "just in case" wipe Dalvik Cache in recovery before flashing the kernel
Downloads:
HeyItsLou Custom Sense Kernel #4 Code Name "Heart of the Sunrise"- http://www.multiupload.com/XRESJKQUSD
HeyItsLou Custom Sense Kernel #5 Code Name "Mood for a Day"- http://www.multiupload.com/CB2F3C3NOK
BFS CPU Scheduler
HeyItsLou Custom Sense Kernel #6 Code Name "Siberian Khatru"- http://www.multiupload.com/KGHFH0DWN8
3-10 Multi-Touch Support
HeyItsLou Custom Sense Kernel #7 Code Name "Yours Is No Disgrace"- http://www.multiupload.com/GOIOA3BPXE
BFQ I/O Scheduler & 3-10 Multi-Touch Support
HeyItsLou Custom Sense Kernel #8 Code Name "The Gates of Delirium"- http://www.multiupload.com/RICRJWTWTB
BFQ I/O Scheduler No Multi-Touch Support
HeyItsLou Custom Sense Kernel #9 Code Name "La Villa Strangiato"- http://www.multiupload.com/1O4IHLPK1V
*NEW* BFQ I/O Scheduler, BFS CPU Scheduler, SD Card Speed Fix No Multi-Touch Support
FYI:
Kernel #8 is based on #4 *NEW* in #8 is the BFQ I/O scheduler Multi Touch Support has been left out for those having trouble booting kernels with Multi-Touch support.
Kernel #9 is based on #4 *NEW* in #9 is the SD Card Speed Fix Patch as well as the BFS CPU Scheduler and BFQ I/O Scheduler Multi Touch Support has been left out for those having trouble booting kernels with Multi-Touch support.
Info:
BFS CPU Scheduler - http://ck.kolivas.org/patches/bfs/bfs-faq.txt
BFQ I/O Scheduler - http://algo.ing.unimo.it/people/paolo/disk_sched/
Latest Kernel Sources Jan 23, 2011:
http://www.multiupload.com/YUH7O7O28V
First Sweet, gonna try this now. You are awesome Lou!!
Nice work bud... i will test on my rls4 and let you know how it goes..
About to install and give a try.
incubus26jc said:
Nice work bud... i will test on my rls4 and let you know how it goes..
Click to expand...
Click to collapse
It works really well with the EVO framework smooth as butta
downloading now on stock deodexed ROM will update tmw.
Installing on red 2.1.3 with distinct inc....will up date in the am.....
Sent from my ADR6300 using XDA App
Hey Lou,
Considering not everyone knows maybe you should put wipe dalvik before flashing the new kernel? Just to save some headaches..just a thought...
Sent from my Incredible using XDA App
I just installed forgot to wipe the davlik cache.... works fine though...
Sent by my Incredible Secretary
Initial impressions: Screen on and web performance looks good, no stuttering on pandora with screen off...we shall see how battery life goes.
fitness12 said:
Hey Lou,
Considering not everyone knows maybe you should put wipe dalvik before flashing the new kernel? Just to save some headaches..just a thought...
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
Not necessary for kernel install.
ok, so im out of town, can i flash a kernal or do i have to wait till i get back to my home service area? Im downloading it to my phone now with the new blue theme. cant wait to get it going, great senseless rom lou, hope this kernel makes it even better.
donnyp1 said:
ok, so im out of town, can i flash a kernal or do i have to wait till i get back to my home service area? Im downloading it to my phone now with the new blue theme. cant wait to get it going, great senseless rom lou, hope this kernel makes it even better.
Click to expand...
Click to collapse
Flash away my friend you're good to go.
gracias mi amigo, you are the rom king! looking forward to pressing this kernel to max usage tomorrow.
LOU,
So far so good... surfed, played a little music, angry birds, and works nice.... tomorrow morning will be the big test... charging my extended battery tonight to see how long I can keep it going. With your red 2.1.3 ROM stock kernal I went with two full days. Not charging the phone at night inbetween. Moderate use of phone...emails, a few calls, music, etc...
sent by my Incredible Secretary...
HeyItsLou said:
Not necessary for kernel install.
Click to expand...
Click to collapse
I have always read you should but hey...I don't argue with a master of everything.
Sent from my Incredible using XDA App
fitness12 said:
I have always read you should but hey...I don't argue with a master of everything.
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
hahaha not quite
Everything is very smooth. Like you said it would be. No need to overclock.
Quadrant scores are lower than usual. Usually means it will have exellent battery life. Dont base a kernel on quadrant scores. If you want better battery life then you want your scores to be lower. I'm sure that overclocking will get you better scores but will decrease battery life. So if everything is running smooth for you, then dont overclock just to get better scores.
think im gunna like this one lou!
fps kernel by dr4go
This kernel is based on the newly released LG v20Q sources, but also includes every (still) needed fix from imperticus' NeoBlaze kernel. It should work on both Froyo and Gingerbread stock and MoDaCo based ROMs. It won't work with CyanogenMod based ROMs.
Prerequisites:
For the SWAP Enabler you need at least 384MB of free disk space on your /data/ partition. And because the swap enabler just triggers the creation of a swapfile it would be best if the data partition wouldn't be too full when executing it (fragmentation will decrease the swap performance by a whole lot!)
Features:
- EXT2/3/4 built in
- NTFS R/W built in
- OC/UV support, overclocking up to 1552MHz [based on cpasjuste] - I recommend SetCPU (http://forum.xda-developers.com/showthread.php?t=505419)
- SDRAM, VDE and GPU overclock [morfic]
- Voodoo Sound [supercurio]
- VR I/O scheduler
- BFQ I/O scheduler (default)
- SLQB memory allocator
- CIFS, TUN
- SWAP support (including swap notify patch for people who want to play around with compcache)
Credits:
- cpasjuste
- beene
- rmcc
- pastime1971
- morfic
- supercurio
- hell_97
- msk
- faux123
- imperticus
Greetings:
- carburano
- juri256
- ryan
INSTALLATION
1. Remove "boot settings" from Pimp My Cpu to reset to default values
2. Reboot into CWM (v5.0.2.7-r2 recommended)
3. Install zip file from SDCARD
4. Reboot
Kernel sources: Github
Personal note: Although I've already been built a lot of kernels (for the HTC Desire HD and also the LG Optimus 2X) I've never released them to public. And I mainly decided to do it, because I'm really really unsatisfied by the performance of this device. Imho it could and should perform a lot better. Join me if you would like to be part of this adventure.
And to conclude with imperticus words: Please also don't forget the 'Thanks button'.
CHANGELOG
2012-02-08
**Kernel v0.4:
- Based on LG's v20Q codebase
- Total removal of RAM hack (may be preliminary, hadn't the chance to look into a few issues, yet...)
- 1st try to fix 50hrs+ issue and a bluetooth incompatibility
2012-01-12
**Kernel v0.3a:
- Reverted the linux kernel patching series (apparently we are stuck on v2.6.32.9)
- Reduced RAM hack to 32MB
- Changed frequency table again (1015MHz replaced with 1040MHz)
- _safe installer added (@ Lo_RaT_PeNaT: that's the version for you to try)
2012-01-10
**Kernel v0.3:
- Improved battery usage
- Fixed a small Synaptic problem
- Patched to 2.6.32.53
- Changed default scheduler to BFQ
- Added some arm 2.6.35+ cpu features (=for snappier phone handling)
- Tweaked .config
- Faster startup time
- Improved EXT4 write performance
- Changed wifi driver
- Lots of sysctl tweaks
- Changed default max frequency to 1216MHz (previously 1408MHz)
- Changed frequency table (added a new frequency 1552MHz, removed 1100MHz)
- Tweaked voltages
- Integrated 64MB Hack
History:
Code:
[u]2012-01-09[/u]
**Kernel v0.2a_repack:
- Merged both installers (of v0.1 and v0.2) and created new one (it no longer overwrites the build.prop file)
[u]2011-12-31[/u]
**Kernel v0.2a:
- Reverted battery voltage scaling fix for Froyo sources
**Kernel v0.2:
- Added SWAP support
- Improved EXT2 and EXT3 performance
- Added NTFS R/W support
- Drastically improved disk and memory read and write speeds when heavy I/O is involved
- Added kernel version to status and removed localversion from it
- Integrated swap notify patch (if anybody wants to use compcache)
- New installer (and dalvik cache is now also automatically wiped)
- Changed default min frequency to 216MHz (previously 389MHz)
- Changed default max frequency to 1408MHz (previously 1015MHz)
- Changed default governor
**SWAP Enabler v0.1:
- First public release
**SWAP Disbler v0.1:
- First public release
[u]2011-12-28[/u]
**Kernel v0.1:
- First public release
FAQ
1. Does fps stand for frames per second?
No, it doesn't. And I will never ever release this information to anyone here. Sorry folks.
2. What is the difference between the normal and the safe version?
Only the installer. If you're stuck when booting, please try the _safe version. Otherwise it is the same kernel.
3. ...more to follow...
It's a great news to have a new kernel to try!
Edit:
ROM:Gueste2x_v2.1(base on v20e&v20m)
1.After 3 times test, quadrant score is about 2800 at 1Ghz.(HP SR1 is about 3300)
2.Andrev OC can work. I really like Myrt's apps to set UV&OC.
installed kernel on stock gingerbread rom.
got a quadrant score of 5700+ at OC 1.2 ghz (VR I/O scheduler)
changed I/O scheduler to BFQ and my score jumped to 6000+
dr4go,
Will you add swap support to your kernel? Because this is really great feature for our low memory device )
Fast. Smooth. Thanks!
Sent from my LG-P990 using XDA App
How come these kernels doesn't work with both CM7 and stock (like MCR) based ROMs? Isn't it possible to fix it? Modles? Kernel version? Too much patches provided by LG?
Remember HTC Hero development back in the days; almost all kernels worked independent on ROM. It was an exception (more or less) if the kernel didn't work with a specific ROM.
Looks like a great kernel, but won't flash a stock based ROM over CM.
What about battery life?
Sent from my LG-P990 using Tapatalk
ryaneu said:
installed kernel on stock gingerbread rom.
got a quadrant score of 5700+ at OC 1.2 ghz (VR I/O scheduler)
changed I/O scheduler to BFQ and my score jumped to 6000+
Click to expand...
Click to collapse
Could you please tell me how to change I/O scheduler?
ryaneu said:
installed kernel on stock gingerbread rom.
got a quadrant score of 5700+ at OC 1.2 ghz (VR I/O scheduler)
changed I/O scheduler to BFQ and my score jumped to 6000+
Click to expand...
Click to collapse
Thanks, that is exactly the information I need to improve the kernel. During HTC Desire HD days, there was no better scheduler than the VR I/O scheduler.
Could you also share your results you get with the Anticipatory-, NoOp- and Deadline-I/O scheduler? That way I could select the best one of those.
Thank you in advance.
dr4go
feav said:
dr4go,
Will you add swap support to your kernel? Because this is really great feature for our low memory device )
Click to expand...
Click to collapse
Noted. Imo you are right, that it would be a great feature for the LG Optimus P990.
Still a lot on my todo list... I already wanted to release it a few days back (as you may have noted I made the last commit on December 12th - since then I'm using it on my device.
Lastly... regarding the todo list: it's done when it's done - and as always: No information released to public before a new kernel it's out.
Stay tuned folks.
sibbor said:
How come these kernels doesn't work with both CM7 and stock (like MCR) based ROMs? Isn't it possible to fix it? Modles? Kernel version? Too much patches provided by LG?
Remember HTC Hero development back in the days; almost all kernels worked independent on ROM. It was an exception (more or less) if the kernel didn't work with a specific ROM.
Looks like a great kernel, but won't flash a stock based ROM over CM.
Click to expand...
Click to collapse
Don't get me wrong: I never had CM installed on any of my previous Android devices. My kernel may work on CM, but honestly... I have no clue.
Yes I've also wanted to try CM once, but as you know... you don't have time for everything.
If you are willing to test it, just flash my kernel (but leave also any other working CM kernel on your SDCARD just in case it doesn't boot anymore) and if you do so... please report back... also what works or what doesn't work...
Thanks in advance,
dr4go
I dealt want to try this kernel buy I do not want to f**k up my phone because it is very good with v20o and rock stable.
is it possible to post a stock kernel so I can return without a flash?
thanks
KillerbeeNL said:
I dealt want to try this kernel buy I do not want to f**k up my phone because it is very good with v20o and rock stable.
is it possible to post a stock kernel so I can return without a flash?
thanks
Click to expand...
Click to collapse
You can find your current kernel inside your zip file of your current ROM. And I doubt that it's the stock kernel you've currently have...
dr4go said:
You can find your current kernel inside your zip file of your current ROM. And I doubt that it's the stock kernel you've currently have...
Click to expand...
Click to collapse
its the rebuild stock v20o from hell_97 with same changelog v20o (?)
EDIT its hypnos v2.0 sp1 v20o version
KillerbeeNL said:
its the rebuild stock v20o from hell_97 with same changelog v20o (?)
Click to expand...
Click to collapse
This is your current kernel you have.
To restore it, there are two possibilities:
1) Copy it to your sdcard and flash it inside a root terminal using the commands:
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p5
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p5
2) Copy the boot.img file inside your nvflash folder, and execute:
Code:
nvflash --bl fastboot.bin --download 10 boot.img
dr4go said:
This is your current kernel you have.
To restore it, there are two possibilities:
1) Copy it to your sdcard and flash it inside a root terminal using the commands:
Code:
dd if=/dev/zero of=/dev/mmcblk0p5
dd if=/sdcard/boot.img of=/dev/mmcblk0p5
2) Copy the boot.img file inside your nvflash folder, and execute:
Code:
nvflash --bl fastboot.bin --download 10 boot.img
Click to expand...
Click to collapse
tnx ..i made a nandbackup with CWM from my current rom and now a have flashed your kernel so if anything goes wrong I can go back
I will test this kernel for a couple of days for stability and battery use.
what's with the "windowsmgr.max_events_per_sec 120 " ??
LG 2X lcd screen has a refreshrate of 72hz so anything higher than 72 fps (120) could cause tearing in animations (?)
thanks for your effort and time
KillerbeeNL said:
tnx ..i made a nandbackup with CWM from my current rom and now a have flashed your kernel so if anything goes wrong I can go back
I will test this kernel for a couple of days for stability and battery use.
what's with the "windowsmgr.max_events_per_sec 120 " ??
LG 2X lcd screen has a refreshrate of 72hz so anything higher than 72 fps (120) could cause tearing in animations (?)
thanks for your effort and time
Click to expand...
Click to collapse
Max_events_per_sec sets OS(software opengl related params) related frames. While actual hw fps is setted in tegra frame buffer kernel driver. Increasing refresh rate at HW level(at kernel level) gives fake higher 2d (as benchmarking software read hw refresh rate to judge 2D),Infact worsen performance and in a long run it damages LCD Controllers and can be dangerous Actual supported refresh rate is 60hz for mobile QVGA and HVGA and you may find 60-62 with other company except LG.
Sent from my LG-P990 using Tapatalk
spica1234 said:
Max_events_per_sec sets OS(software opengl related params) related frames. While actual hw fps is setted in tegra frame buffer kernel driver. Increasing refresh rate at HW level(at kernel level) gives fake higher 2d (as benchmarking software read hw refresh rate to judge 2D),Infact worsen performance and in a long run it damages LCD Controllers and can be dangerous Actual supported refresh rate is 60hz for mobile QVGA and HVGA and you may find 60-62 with other company except LG.
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
So, which value is recommended??? Leave it at 60??? Or 72 in our case????
Cheers!
el_charlie said:
So, which value is recommended??? Leave it at 60??? Or 72 in our case????
Cheers!
Click to expand...
Click to collapse
windows.mgr_max_events_per_sec <---that value is not at all harmfull you can keep any if you want 150-200
Rojak Kernel for Xperia Z
WARNING!!
This kernel allows you to set the CPU frequency beyond the stock rated frequencies. Do this at your own risk! I will not be responsible for any damage to your device if you do so!
INTRODUCTION
This is a kernel for Xperia Z running Omnirom. It may or may not work on other roms.
Any feedback is welcome.
FEATURES
Linux 3.4.86
Gamma control
Sweep 2 Wake
Doubletap 2 wake
USB Fastcharge
CPU overclocking up to 1836 MHz
Intelli-Plug
Additional CPU governors - intellidemand, intelliactive, preservative
Additional I/O scheduler - bfq, sio, fiops
GPU overclocked to 450 MHz
Additional GPU governor - simple
Voltage control
Sound control
Intellithermal (NEW)
REQUIREMENT
This kernel work with Omni 4.4 for Xperia Z. It's tested on Omni 4.4.4 nightly build 20141031. Please update your rom if you're using an older version.
INSTRUCTION
Make sure you're using Omnirom build 20140324 or later. Download here. Flash the zip in CWM or TWRP recovery.
NOTES
To change CPU governor or min/max cpu frequency (i.e. over/underclocking), first disable MPDecision and enable Intelliplug using an app like Fauxclock or Trickster Mod. To over/underclock, use Omnirom's performance setting. Third-party apps might not work.
To use Gamma control, see this post: http://forum.xda-developers.com/showpost.php?p=45436325&postcount=3. Credits to alnikki25k.
.
SOURCE CODE
https://github.com/aidfarh/android_kernel_sony_apq8064/tree/rojak_kk
CREDITS
This kernel is based on Omnirom kernel for yuga. Various codes were copied from kernels by DoomLord, alnikki25k, maxwen and faux123. Thanks to all other kernel developers who's contributed codes to various linux and android kernels.
XDA:DevDB Information
Rojak Kernel for Yuga, Kernel for the Sony Xperia Z
Contributors
aidfarh
Kernel Special Features:
Version Information
Status: Stable
Created 2014-03-26
Last Updated 2014-11-05
Reserved
CHANGELOG
v1 (2014-03-25)
Gamma control
Sweep 2 Wake
Doubletap 2 wake
USB Fastcharge
CPU overclocking up to 1836 MHz
Intelli-Plug
Additional CPU governors - intellidemand, intelliactive
Additional I/O scheduler - bfq
v2 (2014-03-27)
Added sio and fiops I/O schedulers
Overclock GPU to 450 MHz
Include wlan firmware in kernel zip
v3 (2014-04-12)
Added voltage control
Added preservative CPU governor
Updated GPU drivers (copied from xzaosp kernel)
Added simple GPU governor
Kernel updated to Linux 3.4.86
Compiled using Linaro 4.7-2014.01 toolchain
Various optimisations (mostly cherry-picked from xzaosp kernel by alnikki25k) (see github for details)
Added sound control (doesn't seem to work)
v4 (2014-05-05)
Added sound control v3.2
Compiled using Linaro 4.8-2014.03 toolchain
Enabled some linaro optimisations
v5 (2014-11-05)
Synced with updated omnirom kernel source code
Compiled using Christopher83's 4.9.2-2014.09 toolchain
Added intellithermal (disabled by default; enable using Trickster Mod, Fauxclock or similar app)
Updated intelliplug to ver 3.8
Modified preservative governor for extra smoothness
Also see the notes in this post: http://forum.xda-developers.com/showpost.php?p=56506979&postcount=134
Congrats on your kernel, mate! Looks good, will try this
Will this work on ROM based on Omnirom like for example Dirty Unicorn...
Sent from my C6603 using Tapatalk
Vishalkris said:
Will this work on ROM based on Omnirom like for example Dirty Unicorn...
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I honestly don't know. Please try and provide feedback.
K will do it
Sent from my C6603 using Tapatalk
Im wondering the same thing.Tell us when you test please.
FakeSmile said:
Im wondering the same thing.Tell us when you test please.
Click to expand...
Click to collapse
ok first im updating my rom DU...new test build then once booted in to the system will flash the kernel and update how things go...:angel:
---------- Post added at 02:40 AM ---------- Previous post was at 02:17 AM ----------
flashed the kernel on Dirty Unicorn Build 25...every things good...no graphic glitches like Meow Kernel...
Bugs:
1) WiFi doesn't work. @aidfarh it would be good if you provide a Wifi module zip file till u find a way to resolve the issue.
2) A little digestible lag... while scrolling list view in settings and i also while scrolling side wise in the app drawer...
Suggestions.
1) More CPU governors. i know will happen today or tomorrow
2) Release Wifi Modules till the kernel is compatible with omni based roms
3) GPU overclocking can be peaked a little more higher (meow kernel had achieved it 450Mhz u can look in to it)
4) Never leave devloping this kernel as its the first for Omni and we got limited choice when it comes to kernel based on aosp and cm
But still for this stage the kernel is "remarkably good". lots of high expectations from all the omni rom and omni rom based rom users
Keep up the good work
I can confirm that it perfectly working with aslyum rom latest..nothing find unusual.. Post it soon regarding the battery life..
Edit: wifi reception was lower than stock omini..
Sent from my C6603 using Tapatalk
Vishalkris said:
ok first im updating my rom DU...new test build then once booted in to the system will flash the kernel and update how things go...:angel:
---------- Post added at 02:40 AM ---------- Previous post was at 02:17 AM ----------
flashed the kernel on Dirty Unicorn Build 25...every things good...no graphic glitches like Meow Kernel...
Bugs:
1) WiFi doesn't work. @aidfarh it would be good if you provide a Wifi module zip file till u find a way to resolve the issue.
2) A little digestible lag... while scrolling list view in settings and i also while scrolling side wise in the app drawer...
Suggestions.
1) More CPU governors. i know will happen today or tomorrow
2) Release Wifi Modules till the kernel is compatible with omni based roms
3) GPU overclocking can be peaked a little more higher (meow kernel had achieved it 450Mhz u can look in to it)
4) Never leave devloping this kernel as its the first for Omni and we got limited choice when it comes to kernel based on aosp and cm
But still for this stage the kernel is "remarkably good". lots of high expectations from all the omni rom and omni rom based rom users
Keep up the good work
Click to expand...
Click to collapse
I expected that wifi might not work with other roms or older omnirom builds. The latest omnirom kernel has updated wlan drivers but it also need updated wlan firmware to work. Try flashing the attached zip that contains the updated wlan firmware and see if it works.
Lags are hard to quantify and hard to fix. Try other CPU governors or I/O schedulers and see if things improve.
What CPU governor to do you want?
GPU overclocking is planned, but I can't promise anything.
FINALLY!!!! When i sow the thread title i couldn't believe my eyes
Long time we are waiting for a kernel that support Roms that are not based on stock, specially when u bring to us Gamma control and fast charge pleasure.
So i want to say thank u aidfarh from all of my heart, and yes plz don't stop this, keep the development up as much as u can cuz we need u
(now i feel like i am a little girl who asking too much LOL).
I am about to flash PA today, will flash it and I'll try your kernel to see how it goes, and if it doesn't then i'll back to my favorite ROM Dirty Unicorns then i'll try again.
Thank U :victory:
works good in DU
Sent from my C6603 using Tapatalk
off-topic: hahaha ROJAK kernel. typical orang malaysia in naming mixed things!
back to topic, could you include FIOPS IO scheduler by faux123? According to faux, intellidemand/active works the best when combine with FIOPS scheduler.
kingrion88 said:
off-topic: hahaha ROJAK kernel. typical orang malaysia in naming mixed things!
back to topic, could you include FIOPS IO scheduler by faux123? According to faux, intellidemand/active works the best when combine with FIOPS scheduler.
Click to expand...
Click to collapse
Thanks for your suggestion. I'll take it under consideration.
Will this kernel work on Paranoid Android??
acutraaq said:
Will this kernel work on Paranoid Android??
Click to expand...
Click to collapse
Try the pacman kernel will work
Sent from my C6603 using Tapatalk
OK.. It's working on DU 15/03/2014 build, had no WIFI but after flashing wlan firmware the WiFi get fixed.
I don't have any random errors, FC's, Reboots, lags... everything is perfect.
One thing I've noticed is Gamma control, the sittings doesn't stick after reboot and i don't now if that is the same for fast charge or for the
o/u clocking.
Will keep testing...
Its working flawless on infected's omni build 0324. Hope u keep updating this Bad ass. No issues at all so far. Cant wait for the sound control! Thank you dude.
Gesendet von meinem C6603 mit Tapatalk
I need to buy the app to use gamma control,right?
FakeSmile said:
I need to buy the app to use gamma control,right?
Click to expand...
Click to collapse
Yes faux clock
Sent from my Xperia Z using Tapatalk
Here are my speed optimized kernels for samsung touchwiz jellybean, cm11 and aokp kitkat based roms
(many thx to Hank87 http://forum.xda-developers.com/member.php?u=4595544 for testing the many samsung touchwiz test kernels)
V1.2.1:
auto root (tw kernel)
cwm added (tw kernel)
fixed an bug that could make connecting to network very slow
rwsem: steal writing sem for better performance
ondemand: enabled counting iowait as busy for exynos too
kernel fixes for linaro gcc
kernel with AIO enabled
AIO: Don't plug the I/O queue in do_io_submit()
ROW as default io scheduler
build with linaro gcc 4.9.2
kernel build with -Ofast
faux123`s dyn fsync
optimized arm rwsem algorithmfixed an bug that could make the oc kernel unstable
overclock version with 1600mhz max with 16 step frequency table and reduced core voltage
overclock version with 1500mhz max with 15 step frequency table and optimized core voltage
standard version with 1400mhz max with 14 step frequency table and optimized core voltage
on idle cpu can go to 100mhz instead of 200mhz for longer battery life
higher (but save) thermal throttling values
optimized vm values
multithread dexopt enabled
Download:
For Samsung touchwiz jellybean based Roms (CWM zip + Odin tar):
non oc:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607166
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607164
oc1500mhz:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607168
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607169
oc1600mhz:
CWM zip:
https://www.androidfilehost.com/?fid=95784891001607172
Odin tar:
https://www.androidfilehost.com/?fid=95784891001607171
For CM11 + AOKP kitkat based Roms (CWM zip):
non oc:
https://www.androidfilehost.com/?fid=95784891001608505
oc1500:
https://www.androidfilehost.com/?fid=95784891001608510
oc1600:
https://www.androidfilehost.com/?fid=95784891001608518
Sources:
https://github.com/bauner
testing TWoc1600 version right now. Antutu score is 20250. GPU has only two steps??? Will write more later, but thanks a lot for Your work on TW system
Have you read also the changes in GeeckoDev thread for changing gralloc panel freq 57 - 64 Hz? Link: http://forum.xda-developers.com/showthread.php?p=56635030
User_99 said:
Have you read also the changes in GeeckoDev thread for changing gralloc panel freq 57 - 64 Hz? Link: http://forum.xda-developers.com/showthread.php?p=56635030
Click to expand...
Click to collapse
thx for your post.
I will try it and if its working without any problems it comes in the next version
Sounds interresting what GeeckoDev found out. Looks like the new freque. also goot for non playing Note 1 users...
57hz - 59hz is completely safe. If you go beyond that, bootanimation will start to derp (turn off/on the screen once it's fully booted and you're good to go). Also you will have no access to the recovery. I only experienced that on AOSP, though. On Touchwiz I could go to 62hz without a problem. 64hz is fine with the workaround above.
It improves smoothness and lowers latency by quite a good margin (~17ms at 57hz, ~16ms at 60hz, ~15ms at 64hz).
Also, good luck with your kernel!
Had to go back to forest 1.90. On Your kernel cannot use gallery
Sent from my GT-N7000 using XDA Free mobile app
Hi thanx for the kernel... I am using oc1600 cm11 on dirty unicorns 8.2... Its working fine..
Sent from my GT-N7000
Hello Bauner
First of all thank u very much for a great kernel. I have tested the non OC and OC 1.5. Everything runs smoothly except for stock video player that got busted with the OC'ed vers just like forest's. I have yet to test battery as I have just completed one battery cycle. Will update if there's anything pops.
Sent from my GT-N7000 using XDA Free mobile app
I also test it for 2 days on DU Rom and it is working smooth. I'm using the non OC version but it seems the kernel loves to stick on 1.1 and 1.4 speed which is why the battery drains much faster.
I also noticed that when Wifi is on and while screen off, it seems to drain also much faster, while on stock it consumes about 150-170mah on this kernel it consumes 230-250mah.
What I'm happy about this kernel though is that it seems to resolve my issue with Dynamic Colors on DU as I had no single reboots while using it. On stock kernel I had reboots when using Dynamic Colors.
Is there a way that instead of always using 1100 speed, it will use a lower frequency like 800 or 900?
Many thanks for the kernel!
Thanks bauner for the great kernel.my note now more energized and smooth after flash with oc1.5ghz tw....antutuscore got 17k..also problem on whatsapp memory leak seems resolved now :beer:
bratboo said:
I also test it for 2 days on DU Rom and it is working smooth. I'm using the non OC version but it seems the kernel loves to stick on 1.1 and 1.4 speed which is why the battery drains much faster.
I also noticed that when Wifi is on and while screen off, it seems to drain also much faster, while on stock it consumes about 150-170mah on this kernel it consumes 230-250mah.
What I'm happy about this kernel though is that it seems to resolve my issue with Dynamic Colors on DU as I had no single reboots while using it. On stock kernel I had reboots when using Dynamic Colors.
Is there a way that instead of always using 1100 speed, it will use a lower frequency like 800 or 900?
Many thanks for the kernel!
Click to expand...
Click to collapse
did you try to close all running apps and then check again?
if tehere are running apps that makes i/o can make this kernel running on higer frequencies because my modifications on ondemand.
you could try to use an tool like no-frills cpu control and try another cpu governor like pegasusq or conservative.
with this tool you also can see how long your cpu was running on every frequency
bauner said:
did you try to close all running apps and then check again?
if tehere are running apps that makes i/o can make this kernel running on higer frequencies because my modifications on ondemand.
you could try to use an tool like no-frills cpu control and try another cpu governor like pegasusq or conservative.
with this tool you also can see how long your cpu was running on every frequency
Click to expand...
Click to collapse
Thanks! Will test maybe tom and change my governor to pegasusq. Hopefully when on normal use it will use a lower frequency instead of 1100. I'm using BetterBatteryStats to see how long each frequency runs and the majority is 1400, 1100 and 100.
About the higher consume of battery, yes there is one app that was running and it was FB messenger though it was also running when I compared it to the stock kernel from DU.
I'll give feedback again once I'm done with testing.
with my rom+kernel it doesn't stay at high frequencies.
the attached screenshot was made a few minutes after boot complete
It says it couldn't mount storage/sdcard0 when trying to mount in recovery.
(KitKat version)
Hi bauner,
Mine also stay highest 1.1ghz..why never reach 1.5ghz..I'm ondemand/row..
Sent from my GT-N7000 using XDA Free mobile app
Hi guys..please help me.my phone got triangle after flash this kernel via odin.how to remove this triangle without using jig?
Sent from my GT-N7000 using XDA Free mobile app
slipkory said:
Hi guys..please help me.my phone got triangle after flash this kernel via odin.how to remove this triangle without using jig?
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Use this
Thanks lakame. Is it safe to use this triangleaway..this triangle due to flash via odin right..
bauner any steps to get rid this via flash?
Sent from my GT-N7000 using XDA Free mobile app
It's an app. Nothing to do only follow the guides in the app. Sometimes you need the correct kernel for resetting... try it out.