Database Develop

[ROM][TAR] Stock MK2 Odin flashable

You will get the KNOX bootloader if you flash this.
YOU CANNOT UNDO THIS, ITS PERMANENT. FLASHING ANYTHING UNOFFICIAL AFTER FLASHING THIS TAR WILL VOID YOUR WARRANTY​
Just the MK2 FULL stock tar extracted from Kies. Very hard to find online, and only extremely SLOW downloads available, so here it is.
md5 of the Tar: b90c2a1b5b32dca4edc56a3e6a8a3522
Do NOT rename the tar file. Even though it may be convenient to do so, Odin may fail the md5 check for no reason.
(L720VPUEMK2_L720SPTEMK2_L720VPUEMK2_HOME.tar.md5)
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and dont want to wait hours for it to download from slow file hosts.
Mediafire
FileDropper
Instructions:
1. Download tar.md5 from above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit

Danger......Read carefully before flashing.

so if im on stock unrooted mja or mk2 and for any reason i want to flash this file it will cause knox to trip?
i dont understand.
you say it will cause knox to trip!

en11gma said:
so if im on stock unrooted mja or mk2 and for any reason i want to flash this file it will cause knox to trip?
i dont understand.
you say it will cause knox to trip!
Click to expand...
Click to collapse
You will be alright. You have already upgraded to stock 4.3, so you already have the knox bootloader.
If you flash something unofficial, such as CF autoroot or a different recovery, you will trip the warranty void. The tar file I posted are Official, and will not trip the warranty.
Sent from my SPH-L720 using Tapatalk

what happens if i am rooted or have a custom recovery and my knox counter = 1 and i want to flash this with odin?

en11gma said:
what happens if i am rooted or have a custom recovery and my knox counter = 1 and i want to flash this with odin?
Click to expand...
Click to collapse
Well you have already voided your warranty then and currently there is no way to get the knox counter back to 0.
If you flash this, you will be going back to full stock, like you would expect. You are safe to do this.
Sent from my SPH-L720 using Tapatalk

random45 said:
Well you have already voided your warranty then and currently there is no way to get the knox counter back to 0.
If you flash this, you will be going back to full stock, like you would expect. You are safe to do this.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
i have been reading over and over if you try to flash an mk2 or mja over a rooted or custom recovery that you can brick the phone?
are you sure odin would flash this when it detects there is a knox = 1 and custum recovery or root?
dont think it is as simple as you say when you are knox = 1 with custum recovery or root.
hope your right. but i dont think so.

en11gma said:
i have been reading over and over if you try to flash an mk2 or mja over a rooted or custom recovery that you can brick the phone?
are you sure odin would flash this when it detects there is a knox = 1 and custum recovery or root?
dont think it is as simple as you say when you are knox = 1 with custum recovery or root.
hope your right. but i dont think so.
Click to expand...
Click to collapse
I've used Odin to go back to MJA a couple times with a tripped knox counter and custom recovery. It works every time. Why wouldn't it? It just doesn't reset the counter.
Sent from my Galaxy S4 using Tapatalk 4

xanaxdroid said:
I've used Odin to go back to MJA a couple times with a tripped knox counter and custom recovery. It works every time. Why wouldn't it? It just doesn't reset the counter.
Sent from my Galaxy S4 using Tapatalk 4
Click to expand...
Click to collapse
i would assume something is stripped from the MJA and MK2 we get for odin files
kies and ota definately do checks and WIPES better
for some reason the MJA and MK2 i been flashing (stock mja/mk2) on me no root or cust reoovery (knox = 0x0)
those files are not wiping like they should
why are we always having to do wipes 2 and 3x like alot of these instructions say????
something not right
anyhow yea usually i would think just odin over a stock and everything ok.
knox is wierd and i dont know alot about.
people are talking about OTA and KIES screwing their phones up
i see alot of diff stuff being posted and its moving fast.
why are we still having problems with rooting?
isnt cf-auto-root working 100% now for mja and mk2?
are both twrp and cwmr/philz working 100% as far as functioning correctly and not messing anything up in the rom or firmware they go on top of or happen to install with?
seems like alot of people in those channels/forums dont like talking about it to much.
i thin what i will do is stick with stock firmwares (rooted) and then disable the hands free activation and the android system update
then i will just keep those roms to restore to in case it gets bad

en11gma said:
i would assume something is stripped from the MJA and MK2 we get for odin files
kies and ota definately do checks and WIPES better
for some reason the MJA and MK2 i been flashing (stock mja/mk2) on me no root or cust reoovery (knox = 0x0)
those files are not wiping like they should
why are we always having to do wipes 2 and 3x like alot of these instructions say????
something not right
anyhow yea usually i would think just odin over a stock and everything ok.
knox is wierd and i dont know alot about.
people are talking about OTA and KIES screwing their phones up
i see alot of diff stuff being posted and its moving fast.
why are we still having problems with rooting?
isnt cf-auto-root working 100% now for mja and mk2?
are both twrp and cwmr/philz working 100% as far as functioning correctly and not messing anything up in the rom or firmware they go on top of or happen to install with?
seems like alot of people in those channels/forums dont like talking about it to much.
i thin what i will do is stick with stock firmwares (rooted) and then disable the hands free activation and the android system update
then i will just keep those roms to restore to in case it gets bad
Click to expand...
Click to collapse
Sorry I don't understand. Who's having trouble rooting? And that wipe 2 or 3 times stuff is bs. You only have to wipe once. As for the other stuff I don't know. All I know is my phone has worked fine and has never bricked. I don't use KIES either though and mostly run aosp roms.
Sent from my Galaxy S4 using Tapatalk 4

xanaxdroid said:
Sorry I don't understand. Who's having trouble rooting? And that wipe 2 or 3 times stuff is bs. You only have to wipe once. As for the other stuff I don't know. All I know is my phone has worked fine and has never bricked. I don't use KIES either though and mostly run aosp roms.
Sent from my Galaxy S4 using Tapatalk 4
Click to expand...
Click to collapse
i can verify the wiping/erasing from installing that mja or mk2 is not doing what it usually did with other fully stock rom
i think this phone has 2 firmwares and when you mod one the other one boots the next boot that is why you have to wipe it there too
there is DEFINATELY some double booting going on here
that is also why you tell cf-auto-root, twrp and cwmr NOT to reboot
pull battery and boot directly into recovery
i have had to do 2 and 3 wipes and its not just that
i was on mk2 firmware and i downflashed the modem to mdc
i had to reboot at desktop to get it to show in "about" settings
i then flashed the mk2 firmware (stock 2GB) and when i got in ui AGAIN it still showing MDC.....WTF???
ok so i boot into android recovery and wipe again and reboot and its now MK2
sometimes i just reboot and it will show it next time
its not just there either.
settings in ##3424# and *#9090# are also not getting erased with new official rom installs
really wierd stuff
yea i prob only used kies once in mylife and that was just to test it
usually im on CMnightly whatever is the latest
im not new and i most likely above avg on phone stuff
this KNOX stuff is wierd
even if you do an OTA the phone resets 2x during the install process and i think even with odin too

en11gma said:
i can verify the wiping/erasing from installing that mja or mk2 is not doing what it usually did with other fully stock rom
i think this phone has 2 firmwares and when you mod one the other one boots the next boot that is why you have to wipe it there too
there is DEFINATELY some double booting going on here
that is also why you tell cf-auto-root, twrp and cwmr NOT to reboot
pull battery and boot directly into recovery
i have had to do 2 and 3 wipes and its not just that
i was on mk2 firmware and i downflashed the modem to mdc
i had to reboot at desktop to get it to show in "about" settings
i then flashed the mk2 firmware (stock 2GB) and when i got in ui AGAIN it still showing MDC.....WTF???
ok so i boot into android recovery and wipe again and reboot and its now MK2
sometimes i just reboot and it will show it next time
its not just there either.
settings in ##3424# and *#9090# are also not getting erased with new official rom installs
really wierd stuff
yea i prob only used kies once in mylife and that was just to test it
usually im on CMnightly whatever is the latest
im not new and i most likely above avg on phone stuff
this KNOX stuff is wierd
even if you do an OTA the phone resets 2x during the install process and i think even with odin too
Click to expand...
Click to collapse
I let c.f. auto root reboot itself after odining to mk2 and it worked fine. And why are you mixing and matching firmwares and basebands? Also are you using "official" files or files that some guy with one post puts up? I'd say decide what you want to use and stick with it. Anyway good luck.
Sent from my Galaxy S4 using Tapatalk 4

random45 said:
...
Click to expand...
Click to collapse
Hey man. I wanted to let you know I appreciate the crap out of you doing this. The slow downloads are awful. However, I've flashed this .tar file twice now using 2 different version numbers of Odin and the phone boots up but hangs on the SAMSUNG screen. Not the very first boot screen that says samsung galaxy s4 but the next one that begins with the purple and blue swirl and turns into the samsung logo while the led pulses blue. The phone doesn't freeze per se, it just never moves beyond this screen. Unless it's supposed to take 20-30 minutes, which I doubt is the case. Did I possibly get a bad download?

FlowingAway said:
Hey man. I wanted to let you know I appreciate the crap out of you doing this. The slow downloads are awful. However, I've flashed this .tar file twice now using 2 different version numbers of Odin and the phone boots up but hangs on the SAMSUNG screen. Not the very first boot screen that says samsung galaxy s4 but the next one that begins with the purple and blue swirl and turns into the samsung logo while the led pulses blue. The phone doesn't freeze per se, it just never moves beyond this screen. Unless it's supposed to take 20-30 minutes, which I doubt is the case. Did I possibly get a bad download?
Click to expand...
Click to collapse
As with any rom when you first boot up, yes it's supposed to take a while. ("android is upgrading" in disguise maybe?)
Did you do a factory reset before booting up?
Let it do its thing for 10 min at least, and longer than that if you didn't factory reset. If it doesn't boot, then do a factory reset.
Sent from my SPH-L720 using Tapatalk

random45 said:
As with any rom when you first boot up, yes it's supposed to take a while. (android is upgrading in disguise maybe?)
Did you do a factory reset before booting up?
Let it do its thing for 10 min at least, and longer than that if you didn't factory reset. If it doesn't boot, then do a factory reset.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Just saw your reply, thank you. That was the one thing I didn't try. Right after I posted that last message I got into recovery (finally after 3 or 4 tries) and did the factory reset and it booted up perfectly! So handy having this file around. Thanks again for uploading.

I'm happy I found this post. I was able to help my friend with his phone. THANKS!

en11gma said:
i have been reading over and over if you try to flash an mk2 or mja over a rooted or custom recovery that you can brick the phone?
are you sure odin would flash this when it detects there is a knox = 1 and custum recovery or root?
dont think it is as simple as you say when you are knox = 1 with custum recovery or root.
hope your right. but i dont think so.
Click to expand...
Click to collapse
Just for reference, I just did this and it worked just fine. I downgraded the modem to MDC and had SACS installed on it, wifi was not working so did this and it works
i dont care about warranty -

its been over 10 minutes and im still on the yellow sprint screen

I understand that if your flash this MK2 tar you'll end up with the knox bootloader. But if someone wanted to get rid of knox, couldn't they just flash the MJA tar then re-root and update to an knox free MK2 firmware that unknownforce provided and you'd be all set?

LouRock said:
I understand that if your flash this MK2 tar you'll end up with the knox bootloader. But if someone wanted to get rid of knox, couldn't they just flash the MJA tar then re-root and update to an knox free MK2 firmware that unknownforce provided and you'd be all set?
Click to expand...
Click to collapse
There is no known method of removing the knox bootloader, to my knowledge.

Wifi Connection Issue .108 + .118

So as Im sure everyone here knows, new firmware updates have rolled out...
For some odd reason, though, I cannot enjoy them. I came from iHackers 4.1 ROM and attempted to update to the Criskelo .118 ROM. All went okay, except the wifi kept saying "turning on."
Then, amongst other problems, I tried to go to just a stock .108 by downgrading... Still, "turning on wifi."
I'm not sure if there is any relevance, but I had Phil/TWRP dual recovery installed. The Criskelo ROM instructions said I had to have CWM if on a locked bootloader, but I am unlocked. Perhaps I misunderstood and it has to be CWM for both? I did notice that despite many efforts to get my dual recovery back, I was stuck with CWM (I did get dual back though eventually).
So could the problem have been with the conflicting recoveries? And perhaps it didn't install the kernel or ROM properly?
Thanks in advance for any replies.

ShadowTech13 said:
So as Im sure everyone here knows, new firmware updates have rolled out...
For some odd reason, though, I cannot enjoy them. I came from iHackers 4.1 ROM and attempted to update to the Criskelo .118 ROM. All went okay, except the wifi kept saying "turning on."
Then, amongst other problems, I tried to go to just a stock .108 by downgrading... Still, "turning on wifi."
I'm not sure if there is any relevance, but I had Phil/TWRP dual recovery installed. The Criskelo ROM instructions said I had to have CWM if on a locked bootloader, but I am unlocked. Perhaps I misunderstood and it has to be CWM for both? I did notice that despite many efforts to get my dual recovery back, I was stuck with CWM (I did get dual back though eventually).
So could the problem have been with the conflicting recoveries? And perhaps it didn't install the kernel or ROM properly?
Thanks in advance for any replies.
Click to expand...
Click to collapse
The recovery has nothing to do with the functionality of wifi or anything in the ROM for that matter. Did you do a full wipe before installing the Criskelo ROM?
Other than that, make sure you're using the right baseband for .118. (if it even has changed)
If that all fails, make a backup of everything on your phone (also your internal 'sdcard') and do a full re-install of the official .118 ROM using flashtool.

B1nny said:
The recovery has nothing to do with the functionality of wifi or anything in the ROM for that matter. Did you do a full wipe before installing the Criskelo ROM?
Other than that, make sure you're using the right baseband for .118. (if it even has changed)
If that all fails, make a backup of everything on your phone (also your internal 'sdcard') and do a full re-install of the official .118 ROM using flashtool.
Click to expand...
Click to collapse
Yup, I made sure to do a full wipe before I installed it. I did do a backup of my internal and external SD cards just in case something managed to go wrong somehow... Im pretty sure I used the correct baseband, but I will double-check and also try your suggested method using flashtool. I'll let you know how it goes, and thanks for the response!

ShadowTech13 said:
Yup, I made sure to do a full wipe before I installed it. I did do a backup of my internal and external SD cards just in case something managed to go wrong somehow... Im pretty sure I used the correct baseband, but I will double-check and also try your suggested method using flashtool. I'll let you know how it goes, and thanks for the response!
Click to expand...
Click to collapse
Still nothing... I did more wipes/factory resets with this phone than I have ever done. lol

ShadowTech13 said:
Still nothing... I did more wipes/factory resets with this phone than I have ever done. lol
Click to expand...
Click to collapse
You had better bring your phone to the service if you don't want WiFi module dies.

Forgive me for asking, but what would be wrong with the module? Wouldn't it not work at all of that were the case? It's working right now...
Sent from my C6903 using xda premium

ShadowTech13 said:
Forgive me for asking, but what would be wrong with the module? Wouldn't it not work at all of that were the case? It's working right now...
Sent from my C6903 using xda premium
Click to expand...
Click to collapse
Alright so it's definitely not the module. I just flashed PAC's 4.4.4 Beta ROM. The wifi successfully turns on and I am able to view networks, as well as connect to them. So why then, can I not seem to get wifi working on stock based 4.4.4 or .108/.118 ROMs? Any ideas?

[ROM][TAR] Stock NG2 Odin flashable

You will get the KNOX bootloader if you flash this.
YOU CANNOT UNDO THIS, ITS PERMANENT. FLASHING ANYTHING UNOFFICIAL AFTER FLASHING THIS TAR WILL VOID YOUR WARRANTY​
Just the NG2 FULL stock tar.
Do NOT rename the tar file. Even though it may be convenient to do so, Odin may fail the md5 check for no reason.
(L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5)
This is NOT ROOTED. Its the original TAR file for people who need an Emergency Recovery for their phones, and dont want to wait hours for it to download from slow file hosts.
Mediafire
Instructions:
1. Download and Extract tar above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit

Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,

will this work on rooted phone?
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.

jam97 said:
Is this going to update bootloader into NG2?
Is NG2 bootloader unlocked?
Thank you so much,
Click to expand...
Click to collapse
Yes this will update you to the new update NG2 and no the bootloader is still locked.
chriseboy said:
im looking to put my phone back to unrooted stock. will this flash right on a rooted phone? im guessing it will but just want to make sure.
Click to expand...
Click to collapse
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720

ROMANTiC KiD said:
Yes this will update you to the new update NG2 and no the bootloader is still locked.
Yes this will flash right on a rooted phone. The purpose of this is to go back to stock from either rooted or custom rom.
Sent from my SPH-L720
Click to expand...
Click to collapse
sorry for this stupid question , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app

jam97 said:
sorry for this stupid quastion , but will I be able to flash a custom recovery after flashing this image?
Thank you,
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
You will need to re-root the phone after installing this file! Then you will be able to install a custom recovery..

Thanks for putting this on a speedy host. I just downloaded it tonight in under half an hour at my daughter's house, and she doesn't have a particularly fast internet connection.
A quick question - does this file leave your programs intact? Sometimes I like a total wipe (except for my SD card), and start fresh.
Thanks again

my wifi is broken after flashing. won't turn on

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
same problem let me know if you find how to fix it

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
Reflash it again
Sent from my SPH-L720

rtwrobert10 said:
my wifi is broken after flashing. won't turn on
Click to expand...
Click to collapse
biscojams said:
same problem let me know if you find how to fix it
Click to expand...
Click to collapse
ROMANTiC KiD said:
Reflash it again
Sent from my SPH-L720
Click to expand...
Click to collapse
Same here, I wiped then installed twice, no wifi. I'll try one more time,

DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84

DAFTEK said:
Same here, I wiped then installed twice, no wifi. I'll try one more time,
Click to expand...
Click to collapse
That's odd.
I have installed this NG2 tar file with Odin on 2 different phones and WiFi works perfect on both..

2WhiteWolves said:
Try flashing the ng2 kernel after the install. Thru custom recovery.
https://www.androidfilehost.com/?fid=23622183712458388
Thanks to @ g_ding84
Click to expand...
Click to collapse
Thanks for the reply. I did try one more time and this time I went back in recovery and did the two wipes, went back in to download, opened odin3 3.09 via administrator and removed the auto reboot check. after it finished i manually rebooted and wifi worked.
---------- Post added at 10:06 PM ---------- Previous post was at 10:02 PM ----------
Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?

DAFTEK said:
[/COLOR]Now I have another problem. I am no longer with sprint and my phone is unlocked from sprint. I have been using the GOLDENEYE rom on Walmart Family Mobile and all was warning well except for sometimes not connecting calls so I thought i go back to stock with this rom. Problem now is I can make calls with the Walmart sim card, put in the APN settings but i am unable to remove the Hands Free Activation nagging.. Is there anyway to make it go away?
Click to expand...
Click to collapse
Have you tried to pull down the notification bar with two fingers > long press on Hands Free icon to see if something is turned on to make it show up on notification bar? If turned on, shut it off. Hopefully it is that simple. If not that simple, I have no clue how to make it stop. Maybe someone else does.
I haven't heard of anyone having that problem.

Yeah, I tried everything, it's part of the rom I think, nothing worked to make it go away..
I just went back to goldeneye rom, all working perfect again. Thanks.

I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?

RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
+1
also I confirm that everything is working great.

RTbar said:
I just flashed this rom through odin and it didn't wipe any of my programs, isn't is supposed to?
Click to expand...
Click to collapse
Nope. it doesn't wipe data unless stated by the OP that it does. It only restores any apps deleted, or reverses any mods made. Example if you are running Aosp and Odin back to stock. You will get bootloop. After Odin always go to stock recovery and do a factory reset to have a clean install.
Sent from my SPH-L720

Wifi didn't work for me on this rom, coming from a custom mf9 rom. So I odin mf9 bootloader package, and then flashed stock mf9 odexed rooted rom, then odin the mf9 kernel. And did NG2 upgrade through Kies. Now Wi-Fi finally works for me but it's impossible to root. But at least now I got everything working, when I get off of work I can flash the OP version of NG2 cuz at least I could root that 1.

[Q] I Mucked Up....

So I was getting ready to flash a rom in SafeStrap Recovery, first I did advanced wipe and then to be on the safe side I did a format, now Safestrap is gone and my phone won't boot up at all just sits at the first splash screen.
I'm disappointed too to only find out we just have this one custom recovery....
Where can I find the latest KitKat Odin so can I try and flash it then install safestrap (UGGHHH APK) and reboot into recovery and go back to flashing.

Should I use this here: http://forum.xda-developers.com/showthread.php?t=2703006

Yep that'll get you back up and running.

majortaylor said:
Yep that'll get you back up and running.
Click to expand...
Click to collapse
Yeah my only problem now is how do I disable signature verification checking on SafeStrap, it won't let me install Alliance rom. It says it failed verification.
Still hate that we really only have the one custom recovery! LoL

n1nj4Lo said:
Yeah my only problem now is how do I disable signature verification checking on SafeStrap, it won't let me install Alliance rom. It says it failed verification.
Still hate that we really only have the one custom recovery! LoL
Click to expand...
Click to collapse
Did you do the full 4 file install in Carl's thread? I think using format in safestrap can really mess your phone up since it's not a real recovery...make sure you've got v3.75 installed then in safestrap under advanced settings there should be an option for zip file verification try unchecking that...or re-download the alliance zip you may just have a bad download

brisinger08 said:
Did you do the full 4 file install in Carl's thread? I think using format in safestrap can really mess your phone up since it's not a real recovery...make sure you've got v3.75 installed then in safestrap under advanced settings there should be an option for zip file verification try unchecking that...or re-download the alliance zip you may just have a bad download
Click to expand...
Click to collapse
Yeah when I first looked how to disable it I looked in advanced and didn't even realize there was a settings option went there and sure enough very first option.
HAHA! I learned the hard way to stay away from that factory reset/reformat option...
I believe so, Odin flash NC2 or whatever it's called, TowelRoot, BusyBox and then SafeStrap, those 4 full installs? Or were ya talking about Carl and Walter.White's Note 4 rom steps? LoL! I'm very tempted to try that but am happy with TWEAKED Rom right now, Alliance got buggy on me and I gave up on it.

n1nj4Lo said:
Yeah when I first looked how to disable it I looked in advanced and didn't even realize there was a settings option went there and sure enough very first option.
HAHA! I learned the hard way to stay away from that factory reset/reformat option...
I believe so, Odin flash NC2 or whatever it's called, TowelRoot, BusyBox and then SafeStrap, those 4 full installs? Or were ya talking about Carl and Walter.White's Note 4 rom steps? LoL! I'm very tempted to try that but am happy with TWEAKED Rom right now, Alliance got buggy on me and I gave up on it.
Click to expand...
Click to collapse
I was talking about Odin flashing NC2...the link I posted has instructions for flashing just the one HOME file (basically an all-in-one that doesn't wipe your internal storage) or flashing all 4 files (BL/AP/etc) which is a full factory reset...but no worries it sounds like you're up and running now glad you got it sorted
the link i meant to post...sorry bout that too much eggnog
http://forum.xda-developers.com/showthread.php?t=2703006

brisinger08 said:
I was talking about Odin flashing NC2...the link I posted has instructions for flashing just the one HOME file (basically an all-in-one that doesn't wipe your internal storage) or flashing all 4 files (BL/AP/etc) which is a full factory reset...but no worries it sounds like you're up and running now glad you got it sorted
the link i meant to post...sorry bout that too much eggnog
http://forum.xda-developers.com/showthread.php?t=2703006
Click to expand...
Click to collapse
Yea that was the one I used the all-in-one flash, hardest part about it was waiting so damn long for it to finish downloading. haha! I figured it was the simplist and most accurate one that would give me all I needed again.

G930T_PG1_Stock_DeOdexed_Debloated_ROM (7/10/2016)

**You can begin the following process from any Build but you must already have Root Access**
**Required** [root] FlashFire
Download:
- G930T_PG1_Stock_DeOdexed_Debloated_ROM.zip
1. Place the ROM onto your device (use either internal or ext-sdcard).
2. Open the FlashFire app, grant root access, and "Agree" to the Terms and Conditions.
3. Press "(+)" twice to bring up the "Actions" menu.
4. Press "Flash Zip or OTA" and locate and select the ROM. Use the default settings under the "Options" menu and press the checkmark to continue.
5. From the main menu Uncheck all options under "EverRoot" and set "Reboot" to "Download."
6. Press the lightning bolt then "Ok" to begin the flash . The screen will turn black then display the contents of your system before beginning the flash. FlashFire will pause for about 1 minute while flashing the "system" partition.
7. Once the flash is complete and the device reboots into "Download" mode, flash the G930T_PG1_Stock_Modem_Recovery_Bootloader.tar.md5 using Odin's AP slot. The device will take 10 - 15 mins for the first boot!
8. To regain root access, re-run "root.bat" once the device has fully rebooted. Make certain usb debugging is enabled. Enjoy!
Tip: for blazing fast speed turn off animations from Developer Options and reboot!
Notes:
1. The above process will not affect your Knox Warranty Flag.
2. The above process will update your Modem, Non-hlos, System, Bootloader, and Stock Recovery.
3. The ROM will automatically wipe all User Data!
4. Follow this guide if you do not already have root access: http://forum.xda-developers.com/att-galaxy-s7/how-to/root-s7-att-g930a-g935a-t3410538

Congrats on the first G920T ROM! Any way to do this withOUT wiping user data?

seanvree said:
Congrats on the first G920T ROM! Any way to do this withOUT wiping user data?
Click to expand...
Click to collapse
Thx. Use FlashFire's backup function to backup your data then restore after updating.
Sent from my SM-G930T using XDA-Developers mobile app

Nice! Thanks!

First off thanks for posting the first rom in this section. I just wanted to ask if this runs at the speed of the stock s7 or does it lag and delay like mine is now after rooting and applying the fixes?

veritasaequita said:
First off thanks for posting the first rom in this section. I just wanted to ask if this runs at the speed of the stock s7 or does it lag and delay like mine is now after rooting and applying the fixes?
Click to expand...
Click to collapse
Others will have to share their thoughts on that. I am running pure stock w/out root. But debloated, deodexed ROM'S usually run a little faster than pure stock.

muniz_ri said:
Thx. Use FlashFire's backup function to backup your data then restore after updating.
Sent from my SM-G930T using XDA-Developers mobile app
Click to expand...
Click to collapse
If I use flash fire. What are all the items o want to back up for user data only ? I want to make sure I don't restore anything that will mess with this ROM. Thanks!
Sent from my SM-G930T using XDA Free mobile app

THANK YOU, will try as soon as I charge my phone and I will post updates.

Running amazing, definitely faster then stick rooted, only issue I'm having is when trying to make a call it takes a few seconds to connect :/ tried disabling Volte didn't make a difference

This rom is a phenomenal start. It is atleast as fast as stock s7 and runs circles around a fresh rooted one. As stated above the only thing I did notice was some weird calling issue but what cleared that up for me was dialer/settings/ turn off volte and also turn off wifi calling. The wifi calling had to be tricked into turning off as the regular wifi calling in settings was grayed out but I was able to get it in the dialer section. Thanks for a great start!

Will this unlock bootloader ?

Demonith said:
Will this unlock bootloader ?
Click to expand...
Click to collapse
Don't think so

Demonith said:
Will this unlock bootloader ?
Click to expand...
Click to collapse
Nope. Still not possible with us variants. And prob never will.
Sent from my SM-G930T using XDA Free mobile app
---------- Post added at 10:25 PM ---------- Previous post was at 10:25 PM ----------
Great job on this ROM! Have everything set up and it's blazing fast. Pop your PayPal buddy. I'd like to buy you a beer.
Sent from my SM-G930T using XDA Free mobile app

Hey, I also found this weird problem, may NOT be with this ROM, but I've never seen it before. Whenever I try to change the permissions of any app, I get this error. SO, I have to go thru and disable every app before I can change ANY app's permissions. VERY annoying. Anyone have a workaround?

seanvree said:
Hey, I also found this weird problem, may NOT be with this ROM, but I've never seen it before. Whenever I try to change the permissions of any app, I get this error. SO, I have to go thru and disable every app before I can change ANY app's permissions. VERY annoying. Anyone have a workaround?
Click to expand...
Click to collapse
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip

veritasaequita said:
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip
Click to expand...
Click to collapse
This one doesn't' work, Make sure to get the latest from here:
https://download.chainfire.eu/969/SuperSU/
F*CK! Don't do this! I just bricked my phone!!!
I used the new UPDATE and flashed via flashfire, it rebooted, now I get the error: "Security error: This phone has been flashed with unauthorized software & is locked"
Anyone know what to do?

seanvree said:
How do we flash this? I put the .zip on my SD card and tried Flashfire but it doesn't see the zip....Weird.
Click to expand...
Click to collapse
I extracted a APK file out of there and just installed it normally. Hope that helps

Just odin flash the stock PG1 .tar files.
You may also want to remove that link to the regular SuperSU.zip. People should only use the special SuperSU version made for use with adb.

veritasaequita said:
I could be wrong but im pretty sure that the supersu chainfire released today should fix that for you.
https://download.chainfire.eu/970/SuperSU/SuperSU-v2.76-S7QC.zip
Click to expand...
Click to collapse
muniz_ri said:
Just odin flash the stock PG1 .tar files.
You may also want to remove that link to the regular SuperSU.zip. People should only use the special SuperSU version made for use with adb.
Click to expand...
Click to collapse
Okay, I've never done this before. what slot am I using in Odin? where do I get the PG1.Tar files?

seanvree said:
Okay, I've never done this before. what slot am I using in Odin? where do I get the PG1.Tar files?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G930T/
The zip will have all the tar files,, and it will be obvious where they go when unzipped.