{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This kernel is ONLY for AOSP based ROMs. This will NOT work on the stock Moto/GPE ROMs.
I will update this as long as I have time, introducing new features and fixes for any issues that may arise.
If you have any feature requests or ideas that haven't been seen before, don't hesitate to throw it out there, I love new things!
If you're concerned about benchmarks, go here.
Features:
CC: Linaro 4.7.4 1401
Ver: 3.4.99
Kernel Compression: XZ
Ramdisk Compression: GZ
Min Freq: 96000
Max Freq: 1190400
TCP: HTCP/HSTCP/HYBLA/VEGAS/SCALABLE/LP/VENO/YEAH/ILLINOIS/WESTWOOD(default)
FS: exFAT/F2FS
IO: BFQ/SIO/FIOPS/ZEN/VR/NOOP/CFQ/DEADLINE(default)
GOV: intelliactive/ondemandplus/wheatley/ondemand/userspace/powersave/performance/interactive(default)
HotPlug: MPDecision/IntelliPlug(default)
LCD KCAL - RGB Control
Sweep2Wake
BiDirectional Sweep2Sleep
Sweep2Dim
DoubleTap2Wake
Headphone High Performance Mode
FRandom
Powersuspend
VFP Hardfloat
CPU-Boost via sysfs
Click to expand...
Click to collapse
Sweep2Dim:
Sweep2Dim uses a modified version of the sweep2wake drivers in combination with LG's LCD KCAL driver to raise or lower RGB multipliers based on sweep gestures.
Right -> Left sweeps drop the kcal multipliers by 73 (or, 33% of the 220 avail)
Left -> Right sweeps raise the kcal mulitpliers by 73
If you sweep left continuously, or until your display goes "black", the driver will trigger a powerkey press and turn off the display.
Since KCAL does not alter your backlight's brightness, you Sweep2Dim can work parallel to auto-brightness, and you can even use it to dim the display lower than the brightness 'slider' allows for.
Sweep2Dim is disabled by default, if you want to eanble it, just enable Sweep2Sleep first.
sysfs:
/sys/android_touch/sweep2dim (0 = off, 1 = s2d)
/sys/android_touch/sweep2wake (0 = off, 1 = s2w+s2s/s2d, 2 = s2s)
/sys/module/sweep2wake/parameters/up_kcal <- Right sweep increases kcal with this value
/sys/module/sweep2wake/parameters/down_kcal <- Left sweep decreases kcal with this value
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download:
Furnace Kernel / source / changelog / mirrors
Dev Resources:
You will need to get a hold of the latest unpackbootimg/mkbootimg/lz4demo/dtbToolCM binaries, here's a copy of my ~/bin
Boot partition is located here: /dev/block/platform/msm_sdcc.1/by-name/boot
To unpack:
Code:
mkdir output
./unpackbootimg -i boot.img -o output
To repack:
Code:
./mkbootimg --kernel output/boot.img-zImage-dtb --ramdisk output/boot.img-ramdisk.gz --cmdline "console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 vmalloc=400M utags.blkdev=/dev/block/platform/msm_sdcc.1/by-name/utags androidboot.write_protect=0 zcache androidboot.selinux=permissive" --base 0x00000000 --pagesize 2048 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 -o new_boot.img
Unpacking/Repacking ramdisk as .lz4
Code:
lz4demo -d /path/to/ramdisk.lz4
mkbootfs /path/to/ramdisk_dir | lz4demo -c stdin ramdisk.lz4
Packing as .gz
Code:
mkbootfs /path/to/ramdisk_dir | gzip > ramdisk.gz
Compiling DTB from top of kernel source
Code:
dtbToolCM -2 -o dt.img -s 2048 -p scripts/dtc/ arch/arm/boot/
Feature list would be nice.
TangerineTractor said:
Feature list would be nice.
Click to expand...
Click to collapse
It's in the OP...
Savoca said:
It's in the OP...
Click to expand...
Click to collapse
Any recommended settings or just leave at defaults?
Running this at defaults with the latest cm and art, no issues, it's lightning fast and seems pretty decent battery so far.
TangerineTractor said:
Any recommended settings or just leave at defaults?
Running this at defaults with the latest cm and art, no issues, it's lightning fast and seems pretty decent battery so far.
Click to expand...
Click to collapse
Ondemandplus and 192Mhz UC are my settings, the rest is defaulted to my settings.
Iv installed this with no probs, i went for ondemandplus lowest uc and highest oc, im using latest cm11 nightly and not art, wifi working no probs, happy days
Sent from my Moto G using XDA Premium 4 mobile app
i will try this now, does the overclock work because the overclock on pink kernel does not
I'm getting lag in games and scrolling
Sent from my Moto G using Tapatalk
I'm now running this too, does the OC and UC really work? Cant tell if placebo or really works smoother. Have no wifi or any other problems tho... Nice
Nice kernel! Just a question, oc works??
anerik said:
Nice kernel! Just a question, oc works??
Click to expand...
Click to collapse
Yes.
With the same settings on this kernel and on pink's , i am getting lag in games on this kernel , even scrolling trough menu's produces lag
Antutu gives me 13323 on this and 18234 on pinks
It just doesnt feel so snappy and fast , went back to pink's but i thank you for the effort
Sent from my Moto G using xda app-developers app
I don't seem to get any lag. The antutu score with this is the same as with pink kernel for me
Sent from my Moto G using Tapatalk
thescorpion said:
With the same settings on this kernel and on pink's , i am getting lag in games on this kernel , even scrolling trough menu's produces lag
Antutu gives me 13323 on this and 18234 on pinks
It just doesnt feel so snappy and fast , went back to pink's but i thank you for the effort
Sent from my Moto G using xda app-developers app
Click to expand...
Click to collapse
+1
Sent from my Moto G using XDA Premium 4 mobile app
Runs great to me also.
Sent from my Moto G using Tapatalk
Personally I prefer this to pinks kernel, seems smoother on CM nightlies??
Could I request for Dynamic Fsync to be added or has that been replaced by something newer now??
Thanks
Sent from my Moto G using XDA Premium 4 mobile app
Same. Works really well, can actually feel the phone to open apps faster and be more responsive.
Doesn't work on latest nightly for me
Sent from my Moto G using XDA Premium 4 mobile app
The first build of this kernel shouldn't work with the 03032014 Nightly, just the builds between 02282014 and 03022014
Sent from my Moto G using XDA Premium 4 mobile app
Updated with some fixes to intelliplug, and now the kernel installs using an anykernel method.
Sent from my Moto G using XDA Premium 4 mobile app
Related
I absolutely take no creative credit in making this kernel as all I have done is putting the patches together and build based on the Atrix kernel tree. The real credit goes to them.
Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this Kernel!!!
Click to expand...
Click to collapse
Please use the CMW to update the kernel.
CIFS and nls_utf8 kernel modules are in system/lib/modules directory
My friend's atrix is experiencing some random reboot with 1.0.1 kernel (which is undervolt by default). I have added another kernel which is the same build with stock voltage. So if you are experiencing random reboot, please use the stock voltage version.
UV: under-volt by default
SV: Stock voltage, you can under volt it by stepcpu or other similar software
SF: Stock AVP(266MHz), 3D(300MHz), SDRAM(300MHz) frequency and stock voltage
Click to expand...
Click to collapse
Change log (for detailed change please visit My Kernel source ):
Code:
Version 1.0.2 (unified kernel for tegrapart):
> [B][URL="http://www.multiupload.com/WPX5AICGG4"]Version 1.0.2 -SV download link[/URL][/B]
> [B][URL="http://www.multiupload.com/XSYOTV2KL7"]Version 1.0.2 -SF download link[/URL][/B]
> [B][URL="http://www.multiupload.com/7J437AOZ6D"]Version 1.0.2 -UV download link[/URL][/B]
- update kernel to 2.6.32.44
- VFP patch (please see gitorious for log)
- unified kernel patch (thanks to eval-)
[B][SIZE="4"]Kernel version older than 1.0.1(inculding) are for [COLOR="Red"]AT&T[/COLOR] only[/SIZE][/B]
Version 1.0.1 (AT&T GB only):
> [B][URL="http://www.multiupload.com/QQRPJVM90Q"]Version 1.0.1 -UV download link[/URL][/B]
> [B][URL="http://www.multiupload.com/K955K7IQ6W"]Version 1.0.1 -SV download link[/URL][/B]
* OC/UV based on faux123's code. Big thanks to faux123 (this also fixes the 6mV on 1100Mhz)
- 3D engine clock at 350MHz (300MHz)
- Overclocked SDRAM from 300MHz to 333MHz
- Overclocked AVP 266MHz to 280MHz
Version 1.0.0 (AT&T GB only):
* JRCU: An RCU for SMP with a single CPU garbage collector
* BFQ (default), Vr and Simple I/O scheduler.
* SLQB memory allocator
* [URL="http://forum.xda-developers.com/showthread.php?t=1165938"]OC/UV based on edgan's patch[/URL] ~1.1G
* Kernel optimization
* Update to 2.6.32.43 kernel
* EXT4
* CIFS and nls_utf8 kernel modules are in system/lib/modules
* kernel based on ATT Atrix Stock GB source
Version 0.0.1 (AT&T froyo only):
* BFQ I/O scheduler (v2-r1)
* SLQB memory allocator
* Optimized ARM RWSEM algorithm
* Update to 2.6.32.42 kernel
* EXT4
* kernel based on ATT Atrix Stock FROYO source (v1.2.6)
Kernel source
Thanks, I'll try it out and post back.
Sent from my MB860 using XDA Premium App
And we have another custom kernel for the Atrix. Cool man .. the devs are back in business on the Atrix.
will we be able to use this kernel for OCing?
I think we need to grab/recruit bigrush from the Xoom community for oc'n tegra 2
Sent from my MB860 using XDA App
foreverzero89 said:
will we be able to use this kernel for OCing?
Click to expand...
Click to collapse
Not yet... I have not patch the OC yet.
Sent from my MB860 using XDA Premium App
release version 1.0.0 based on GB source code.
huanyu said:
release version 1.0.0 based on GB source code.
Click to expand...
Click to collapse
Giving it a go!
Sent from my MB860 using Tapatalk
Testing it now. Kernel seems very fast. 3500 both on quadrant and smartbench. Will continue to test to see battery drain.
Sent from my MB860 using XDA Premium App
Did anyone tried with Cherry Crust 0.6 Rom yet?
I'm on cherry pie v.5.
Sent from my Inspire 4G using XDA Premium App
Flashed on Alien 3 with Alien theme.
7 minutes after flash for reboot. Phone rebooted a second time on it's own.
Lost all my widgets, so have to set those up again which is nothing serious. That only takes 5 minutes.
Min clock speed available now is 300MHz. Currently at 1100/300 and stable.
Will watch battery life, and report back on stability later today after I have a few beers at the bar!
Nice work on this!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Most stable kernel I've used so far
Sent from my MB860 using XDA App
Lightning quick! I agree with neer, def most stable. No reboots as of yet and CPU seems to run slightly cooler.
Sent from my MB860 using XDA Premium App
Why is the min frequency 300 and not 216?
What are some good undervolt settings for this? I tried -75 on 300mhz and phone locked up/rebooted.
Just realized this broke my WiFi.
Going back to Faux's to see if that fixes it, otherwise it's a wipe and flash a ROM again.
CaelanT said:
Just realized this broke my WiFi.
Going back to Faux's to see if that fixes it, otherwise it's a wipe and flash a ROM again.
Click to expand...
Click to collapse
Since faux use a custom wifi module, before flash other kernel, its good idea to restore to stock kernel (faux has a zip to restore), so the new kernel use the standar wifi module.
It happens to me going from faux to edgan's kernel.
Im going to test now!
@huanyu
does this kernel includes tun.ko and advanced routing?
Also, why on 1100, setCPU shows 6mv?
Thanks
Hi guys! As since 2 months i am also in the kernel dev side, i was wondering if someone wants to use a Vibrant porting of the Talon kernel modded by me to fully suits Simply Honey ROMs (i am a dev of SH Team)....
So here it is!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Basic Features (from original Talon):
Code:
Based on latest Samsung Opensource Gingerbread Sources
Voodoo Lagfix and Sound v10
Voodoo Color for 2.3.4
Ported Nexus S Framebuffer
mDNIe based on Speedmod
BLN Support from Neldar
Custom Voodoo CWM 3.0.0.5
Updated to latest Jhash3
340MB RAM Free (w/ 720p)
OC/UV support up to 1.2ghz
Swap + ZRAM (compcache)
Wired Headset Support
Audio Dock Support
Battery Polling set to 60s
Set Light Sensor Polling to 1s
Sched_Autogroup v4 (per sessions)
TinyRCU (smaller memory footprint)
SIO / VR / BFQv2-r1 IO Schedulers
Tweaked Ondemand Governor
Stochastic Fair Blue (SFB) network scheduler
Updated to latest Samsung Source
Lots of Upstream Linux/AOSP fixes
CIFS/TUN Support
Custom Boot Animations
The bootanimation.zip needs to be /system/media/sanim.zip <- notice the name change
CIFS Support
Mount under /mnt/sdcard/cifs instead of /mnt/cifs.. Also use "Mount Manager" instead of "CIFS Manager"
Logcat Instructions
To enable/disable Logcat, type "logcat-enable" or "logcat-disable" in a terminal emulator and reboot
Lowmemorykiller Settings
Talon kernel includes Kodos96's "LMKSet". You can adjust the PRESET=X value in /etc/ram.conf ..
The presets are listed in the file, recommended settings are set by default. Reboot to take effect
Also make sure theres no "ramhack" scripts in /etc/init.d/ , if there is, delete it and reboot.
To install:
Flash .zip file with CWM Recovery
then reboot the phone
Enable/Disable Voodoo Lagfix in CWM->Voodoo
Delete Voltage Control settings in CWM->Advanced
ZRAM Module Instructions:
To enable/disable ZRAM feature, write in a Terminal Emulator "/bin/zram-switch" and then reboot your phone
How to fix volume controls in a ROM
Volume keys are reversed. To solve in the rom simply navigate to system/usr/keylayout/aries-keypad.kl using Root Explorer and swap the numbers 114 and 115. If done right before flashing the kernel no other steps are needed. If done after flashing the kernel then a reboot will be in order. Buttons will still be reversed in recovery.
Click to expand...
Click to collapse
TALON SH MODS:
- VR Scheduler as default
- InteractiveX governor as default
- Tweaked InteractiveX (for more responsiveness and battery life)
- Juwe RAM Hack settings included into the kernel
- Some code cleanup
- ZRAM Switch feature (disabled by default)
- SD Card Read-Ahead tweaks
- Compiled with Linaro GCC 4.6.2 + O2 + Graphite Optimisations
- Sleepfreq set to 400Mhz
- ULP_FREQ set to 400Mhz
- Reduced CPU Voltages for 400 and 100 Mhz steps
- Reduced LCD and RAM Voltages
- Screen temp set to 6900K
- CWM 3.0.0.5 themed by me
- SH Themed bootlogo
- 6 steps frequency (1Ghz step included)
- Adjusted DVFS settings
- Raised FPS Cap to 66
- Support for 10 fingers multitouch
- TCP/IP Buffers tweaks
- cpu_freq_stats fixes
- Conservative Governor auto insmod
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DOWNLOAD LINKS:
T5s VIBRANT: http://code.google.com/p/simply-honey-rom/downloads/detail?name=Talon-SH-T5s_VIBRANT.zip&can=2&q=
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WHAT DOESN'T WORK?
- GPS (need to find a fix)
- Probably Wired Headset Button
Click to expand...
Click to collapse
CHANGELOG: http://code.google.com/p/simply-honey-rom/wiki/ChangelogTalonSH
HOW TO USE THE KERNEL: http://code.google.com/p/simply-honey-rom/wiki/UseTalonSH
SOURCES: https://github.com/simone201/Talon-SH-Vibrant
DON'T FORGET TO DONATE FOR MY WORK!!
All credit for the original project goes to existz, kodos96 and all the Talon Dev Crew!
by Simone201
Thanks, great kernel very fast and stable!
Thanks brother,works great.
Sent from my SGH-T959 using XDA Premium App
Edit:tryed on zen works flawless.zen is jvr and have not tryed on anything else.
Is this the same one posted on the SH thread?
Sent from my GT-I9000 using XDA Premium App
This is only for SH right? Cuz I'm on trigger 2. 3. 5 this is .4 so? Sorry for the dumbness
Sent from my SGH-T959 using xda premium
I'm on darky rom JVQ and it works fine. (The talon posted on the SH thread) but since trigger is cm7 based, its different.
Sent from my GT-I9000 using XDA Premium App
kevho00 said:
Is this the same one posted on the SH thread?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
This is updated. I have been away and haven't tested it myself but it looks like as well as other enhancements the CWM is different and should work as expected.
@simone201 I'll try and get with you later. We went away Disney World kind spontaneous.
Sent from my SGH-T959 using xda premium
Good work on this. So far no hiccups. Nice to have the updated voodoo and cwm
Sent from my GT-I9000 using XDA App
Glad u like it!
Sent from my GT-I9000 using Tapatalk
What gov do you recommend? I have always used on demand or conservative. What's the best one for batteryand performance?
Simply Honey 5.1 w/ 1.2 Talon kernel. Badass Rom \m/
You may include the vol adjustment how to on this link as well
Sent from my GT-I9000 using XDA App
Do this work for Simply Stock 2.3.5?
Sent from my SGH-T959 using xda premium
Boot animation...
Hi simone201,
Just flashed your Kernal. I had EB's before. It still has his Boot animation showing.
I went into /system/media and I don't see your boot file in there per your instructions of moving it to the /system/media location. where is it located so I can move it there and do I have to change the name from Bootanimation to the name you showed? /system/media/sanim.zip
Thanks,
CatfishKnight said:
Hi simone201,
Just flashed your Kernal. I had EB's before. It still has his Boot animation showing.
I went into /system/media and I don't see your boot file in there per your instructions of moving it to the /system/media location. where is it located so I can move it there and do I have to change the name from Bootanimation to the name you showed? /system/media/sanim.zip
Thanks,
Click to expand...
Click to collapse
This has always been my kernel, EB has never done a kernel...
Anyway, bootanimation /system/media/sanim.zip
Sent from my GT-I9000 using Tapatalk
simone201 said:
This has always been my kernel, EB has never done a kernel...
Anyway, bootanimation /system/media/sanim.zip
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I looked in there and I don't see a file called sanim.zip...
/system/media/sanim.zip
My boot animation is different from what you are showing...
Yours in this thread showing the bee & the words your phone flying
Wayne561 said:
Do this work for Simply Stock 2.3.5?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Yes,verywell
simply ginger
CatfishKnight said:
I looked in there and I don't see a file called sanim.zip...
/system/media/sanim.zip
My boot animation is different from what you are showing...
Yours in this thread showing the bee & the words your phone flying
Click to expand...
Click to collapse
Go to my ROM thread (in my sig); addons section and download the animation zip package flashable
Sent from my GT-I9000 using Tapatalk
simone201 said:
Go to my ROM thread (in my sig); addons section and download the animation zip package flashable
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Cool,
Thanks,
Can this work on CM7/MIUI ?
How to fix volume controls.
Volume keys are reversed. To solve in the rom simply navigate to system/usr/keylayout/aries-keypad.kl using Root Explorer and swap the numbers 114 and 115. If done right before flashing the kernel no other steps are needed. If done after flashing the kernel then a reboot will be in order. Buttons will still be reversed in recovery.
Sent from my GT-I9000 using XDA App
The Ace Kernel-OC/Non-OC
FEATURES
Two versions-OC/Non-OC in single installer(Amarullz aroma installer).
Cleancache and frontswap support.
3 new frequencies to the overclocked kernel between 480 and 787 Mhz,i.e.,604,672 and 729.
Frequencies supported-OC-Version
122,200,245,320,480,604,672,729,787,806,825,844,864,883,902,921,940,960.
Frequencies supported-Non-OC-Version-
122,200,245,320,480,604,672,729,768,800
.Customizable governor adding and enabling/disabling logcat during install.
Total 19 cpu governors-
13-Default
Intellidemand
Smartass
Savagedgen
Smartass2
Scary
Performance
Lagfree
Interactive
InteractiveX
Brazillianwax
Ondemand
Conservative
6-Modules
Userspace
Powersave
ondemandx
lionheart
lazy
minmax
Ext4 patches from linux 3.0 kernel
Lib sha1 patches for 10% faster boot
6 I/O Schedulers-noop as default-Others being Deadline,SIO,VR,BFQ and CFQ.
Two way call recording.
Various performance improvements and battery life optimizations to the kernel.
BLN/TUN/CIFS/ZRAM
Some bug fixes
Disabled some logging and debugging options including logcat to improve battery life.If you require logcat you can enable it at boot time through amarulz installer.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
INSTALLATION
Download the zip from download section on project page as stated below on second post, put it in sdcard, reboot into clockworkmod recovery .Follow instructions in amarulz installer.Select OC/Non-OC.Select the next options(Governors/Logcat enable/disable).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
WARNING! CARELESS OVERCLOCKING MAY FRY YOUR PHONE.SO USE WITH CAUTION. I AM NOT RESPONSIBLE FOR ANY DAMAGE!
SOURCES
https://github.com/akashnk/android_kernel_samsung_cooper
Click to expand...
Click to collapse
DOWNLOADS
Latest Version-http://code.google.com/p/the-ace-kernel/downloads/detail?name=TheAceKernel-beta4.zip
All Downloads-http://code.google.com/p/the-ace-kernel/downloads/list
SOURCES
The linux kernel is under GPL.Whoever modifies it must share source code.
My sources-https://github.com/akashnk/android_kernel_samsung_cooper
http://code.google.com/p/the-ace-kernel/source/browse/#git%2Fsamsung_kernel_cooper
CHANGELOG
Code:
03/05/12-vBeta4
1.Added and enabled cleancache and frontswap.
2.Rewrote battery code again.
3.Added bfq i/o scheduler.
4.Enabled ksm.
5.Speed up access to cgroupfs mounted entries in /proc/mounts.
6.mmc: core: Fix possible race between runtime suspend and runtime resume.
25/04/2012-vBeta3.1
1.Deep sleep not working on wifi on should be fixed.
2.Modified lulzactive to tegrak lulzactive.
Lulzactive app from market working.
23/04/2012-Beta3
1. Add 3 more governors 13 default and 6 as modules.
2. Ext4 patches from linux 3.0 kernel.
3. change page writeback values.
4. Dm cache enabled
5. Lowered VDD levels of frequencies below 672 Mhz.
6. Add lib sha1 patches for 12% faster boot time.
7. Added ARM CPU topology
8. Fixed USB Tethering
9. use Amarulz installer script installer script.
10.Compiled wifi driver from ar6ksdk 3.0 source.
11.Disabled fsync.
12.Fixed memory leaks.
20/04/2012-Beta2
1.Optimized rcutree-better application responsiveness.
2.Added 3 governors-Intellidemand,Interactive and InteractiveX...Recommend Intellidemand for balanced battery and performance.
3.Removed some changes to drivers.
4.Performance update-removed some bugs and optimize more for performance.
18/04/2012-Initial Release
-Compiled from Samsung Kernel sources using Sourcery G++ Lite
-13 governors and 5 I/O schedulers
-3 new frequencies to overclock code in frequency table between 480 and 787 Mhz.
-Rewrote battery driver code(Thanks Anonymous and LibSc)
-Performance optimisations.Disabled some logging and debugging
-Added 2 way call recording
CREDITS
-Ketut Kumajaya for his source patches.
-Anonymous for his source patches.
-Developers of various kernels like SpeedMod,FreeXperia,Phiexz,TomGiordino etc. and their sources
-Code aurora
-Amarulz for the installer.
-LibiSC for formula showing correct mV
-Samsung for Source Code
-Google for Android.
FAQS
Why is logcat disabled and how do I enable it?
Logcat is a useful service to log and find out whats wrong with the system.But it runs even when it is not required
and eats battery.So I compiled it as module and disabled it by default.
You can enable it at boot by installer
or
To make it permanent Download This script here http://dl.dropbox.com/u/18323177/logcat-enabler.zip and flash it via cwm. If you want to delete it again just delete 37logcat
from /system/etc/init.d.
Click to expand...
Click to collapse
About Governor Modules?
Modules can be selected at boot which can be deleted from /system/etc/init.d later.
or
Governor modules can be loaded in the same way as other module.They are in /system/lib/modules.
e.g.- insmod /system/lib/modules/cpufreq_lionheart.ko
Remove modules
e.g.- rmmod /system/lib/modules/cpufreq_lionheart.ko
Click to expand...
Click to collapse
Why some can overclock to 921 Mhz and some only to 864 Mhz and others different frequency?
Every CPU is unique.The CPU may go upto different frequencies but they were tested for stability at a common 800 Mhz Frequency
only.
Click to expand...
Click to collapse
How to Overclock,Change Schedulers and Governors
You can use apps like No Frills CPU Control,SetCPU,CM settings or write some script yourself
Click to expand...
Click to collapse
What all these governors and schedulers do and how do I know what to use?
Have a look here
http://forum.xda-developers.com/showthread.php?t=1369817
Click to expand...
Click to collapse
First WOW! new Cm kernel
Sent from my GT-I9100 using xda premium
future may be
Welcome back! Will try your kernel
Excellent work
Cool.. will try..
Sent from my GT-S5830 using XDA
Nice work
Cool, hope it does something with the battery life
This is stable at 960 mhz?
Sent from my Nokia 3110i using xda premium
Cool...and, xda frequent question- how the battery life?
Spoiler
sent from my Nokia Pisang
dredremon said:
This is stable at 960 mhz?
Sent from my Nokia 3110i using xda premium
Click to expand...
Click to collapse
As stated in FAQ different phones will be stable at different frequencies.
encik_racun said:
Cool...and, xda frequent question- how the battery life?
Spoiler
sent from my Nokia Pisang
Click to expand...
Click to collapse
I need your feedback. I intend to increase battery life.
Testing now
Sent from my GT-S5830 using Tapatalk
Testing.
Sent from my GT-S5830 using xda premium
Who has tested?
Battery seems a little more consistent, percentage is not fluid thoug (eg 100% -> 91 in around 5 minutes of browsing on wifi).
Nice. This is a fusion of zImage-Mod and blackhawk? I am right? And one question more - why can by the frequency steps more normal - like in non-OC kernel, that means for example 800Mhz instant 806Mhz, or 735 instant 787, that will "look better".
Quadrant score?
Sent from my GT-S5830 using xda premium
dragonnn said:
Nice. This is a fusion of zImage-Mod and blackhawk? I am right? And one question more - why can by the frequency steps more normal - like in non-OC kernel, that means for example 800Mhz instant 806Mhz, or 735 instant 787, that will "look better".
Click to expand...
Click to collapse
I have used some parts of both anonymous and ketut sources and also other sources .
It is not about "looking better".It is about running at real frequency steps.Our Phone does not really run at 800 Mhz but at 787 Mhz.
On a stock Galaxy Ace the CPU gets its clock from different PLL's using dividers. Our device has 3 PLL's running at 245(PLL1), 960(PLL0) and 800(PLL2) MHz. The 480MHz step is using PLL0 divided by 2 and the "800MHz" step uses PLL2 divided by 1.
But this is not all.The PLL speeds are configured with a multiplier that can be configured up 63 (6-bits) and it multiplies with a clock called PLL_TCXO which runs at 19.2MHz. On the Galaxy Ace PLL2 is configred as 41*19.2MHz which means it really isn't running at 800MHz but rather at 787.2MHz.
The same applies for other speeds.
OK as i promised i built my kernel.
Before anything i want to thank iodak which gives us nice codes and nice ideas i never took alone, laufersteppenwolf and kholk.
The code is substantially the iodak v1 code but i added some bugfixes from externity project and some Werewolf kernel features.
I'm not the "author" but just for the community i "mixed" all the best i can found actually in the net and during the time i'll research and add some interesting feature i'll found.
The new Revolution version is based on Demetris codes (Optimus Prime-play) but indeed i mixed most of the codes i found on the net.
CHANGELOG and UPDATES
Initial features:
- Same as iodak v1
- CPU at 1.7 ghz
- Optimized ksem algorithm [by Ezeekiel]
- Gpu clock interactive regulation, max frequence 766 mhz but i suggest to not go more than 600 mhz
- Added gaming and pmc cpu governors [Thanks Laufersteppenwolf]
- Temp throttle skin raised at 48 ° C and cpu throttle frequence increased at 1300 mhz
- Lot of bugfixes from Linux developers
V1.5
- implemented uhid support (for usb peripheric but i can't test it)
- modified freeze-wake-standby system (thanks TripNRaVeR)
- added araragi fix for wakelock
- various bugfixes and tweaks
- added cpu topology definitions, new voice in trickstermod for powersaving
- rebased clock table on multiple of 102 mhz for cpu_0 and cpu_g
- some other tweaks and bugfixes
V1.51
- Improved cpu topology code
- Restored interactive number of active cpu selectable
- other various bugfixes
V1.52
- added cfg i/o scheduler
- some other little patch and bugfix
V1.55 "BE CAREFUL, THIS IS NOT STABLE FOR ALL PHONE, I CAN JUST TELL IT'S REALLY STABLE ON MINE"
- raised voltages
- added fastcharge
- rebased all cpu clocks
- unlinked gpu
- raised some clocks
- compiled with Linaro toolchain gcc 4.7.3 13.04
V2
- Various bugfixes from different authors in the net
- Lot of commits from TripNraver optimized kernel for HTC ONE X
- Zram updated with Snappy google compression, it should give more i/o speed
- araragi features with the new inspired by kholk Livecolor code
- HTC ONE X clock table
- LP core voltage table editable in Trickster mod
- Enabled Swap
- Enabled 100 200 and 300 mhz clock step usable
- OC for gpu and ram
- Compiled with Linaro toolchain 4.7.4 and optimizations
- UKSM script ported from 3.0 kernel
- Restored stock thermal framework
V2.1
- New thermal tweaks from demetris
- balanced cpuquiet governor from demetris
- enabled zcache (thanks faux)
- Xpad support
- some other thing not worth to be explained here
- FOR ANDROID 4.3 only atm !!!!!
REVOLUTION 1
- Rebased entirely on Demetris' Optimus Codes
- Less controls in trickstermod, just cpu Voltage
- gpu at 520 mhz
- no more overclock since it's not stable with this code
- all the features of optimus primes except cpuquiet selectable governor
- huge number of patches and bugfixes
- need your feedback for stability
PRE-REQUIREMENTS
UNLOCKED BOOTLOADER, ROOT AND RECOVERY!
HOW TO INSTALL
1 Download the KERNEL version which fits with your needs
2 Copy the zip to your sdcard
3 Boot into recovery
4 Flash the zip
5 Wipe cache/dalvik (not required everytime)
6 Reboot
Download Links:
REV 1 05/09/2013
Stock REVOLUTION 1 link: https://www.dropbox.com/s/cxw92g7w8rx7cu7/PH85_REV1_KERNEL_STOCK_P880.zip
CM10.2 REVOLUTION 1 link: https://www.dropbox.com/s/acmnidv4bl7s4az/PH85_REV1_KERNEL_CM10.2_P880.zip CM10.2 VERSION NEEDS TO BE FIXED
PH85 old project
Stock best version v1.52: https://www.dropbox.com/s/ia0ohxouure2q1z/PH85_KERNEL_P880_V1.52.zip
- Bluetooth not working fine in following versions but it has great performances
CM10.1 version v2.15 : https://www.dropbox.com/s/bypkitzbm2b507o/PH85_V2.15_KERNEL_CM10.1_P880.zip
CM10.2 version v2.15 : https://www.dropbox.com/s/8s8ezn4ffbhgg6e/PH85_V2.15_KERNEL_CM10.2_P880.zip
My github
Original PH85 project: https://github.com/Pesach85/ph85-p880-kernel-project
Revolution 1 project: https://github.com/Pesach85/lge-kernel-p880
THANKS
I want to thank all the XDA community and all people which trasmitted me the passion to compile by myself a kernel and add features
People which i met here in xda from long time like berni and iodak and new developers i met here in p880 section like demetris, laufersteppen wolf and many other i can't nominate here.
Some screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First a question: is it for stock or CM?
Then, do I get you right that this is kernel is more-less cherry-picked?
But anyways, thanks for your work
Sent from my LG-P880 using xda premium
If cherry picked stay for "i use your sources because i'm not able to code by myself", yes it is
Anyway yes almost it is.
Follow my github to see what i change
Sent from my LG-P880 using xda app-developers app
Pesach85 said:
If cherry picked stay for "i use your sources because i'm not able to code by myself", yes it is.
Anyway yes almost it is.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Yeah, that's what it means
It comes mainly from git, where you've got the ability to "cherry-pick" single commits
BTW, your github it down
Sent from my LG-P880 using xda premium
I not use exactly cherry pic function i use the old fashioned way copy-paste because i feel more comfortable with
You should see the commit with github app anyway
Sent from my LG-P880 using xda app-developers app
Tested it, and it appears that mobile data aand wifi are not working. It also lags at times when I unlock the screen. Everything else is ok though.
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Flying_Bear said:
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Click to expand...
Click to collapse
Theorically raising the throttle temps this Tegra 3 platform can reach the One X (customized) level but this phone overheats too soon so i tried to setup the best i can without raising too much the temperatures limit.
The GPU clock doesn't give increase in perfomance, i tested it before editing the sources, even if you raise all GPU frequency at 600 i guess for the same thermal reason.
So for now i think i found the best overlock/battery drain compromise without compromise stability.
We all know this nvidia platform could indeed give much more performance with a better thermal cooling.
Pesach85 said:
Theorically raising the throttle temps this Tegra 3 platform can reach the One X (customized) level but this phone overheats too soon so i tried to setup the best i can without raising too much the temperatures limit.
The GPU clock doesn't give increase in perfomance, i tested it before editing the sources, even if you raise all GPU frequency at 600 i guess for the same thermal reason.
So for now i think i found the best overlock/battery drain compromise without compromise stability.
We all know this nvidia platform could indeed give much more performance with a better thermal cooling.
Click to expand...
Click to collapse
Gpu overclocking helps the odd game, MC4 for example
Sent from my rooted P880
Can u do cwm zip to install from phone cause i have no pc here
Sent from my LG-P880 using xda app-developers app
emre81tr said:
Can u do cwm zip to install from phone cause i have no pc here
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Use tefminal emulator, you can flash it from there
Flying_Bear said:
Use tefminal emulator, you can flash it from there
Click to expand...
Click to collapse
How will i do ? Where do i put the image file
Any instaction
Sent from my LG-P880 using xda app-developers app
Flying_Bear said:
All works for me, installed it over iodak v2. 5800 quadrant. I'm loving it
Click to expand...
Click to collapse
how solve baseband xmm wakelock issue?
View attachment j794_root.rar
emre81tr said:
How will i do ? Where do i put the image file
Any instaction
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
1.download j794_root (if u dont have)
2.Extrat it
3. open the Extracted folder
4. j794_root/root/ copy the img file here.
5. go back and right click root folder by holding on SHIFT key.
6. Select "Open command windows here"
7. now you can type the commend in the instruction on command window i.e
Code:
adb push phv1boot.img /sdcard/
adb shell
su
cat /mnt/sdcard/phv1boot.img >/dev/block/mmcblk0p2
sync
reboot
Before doing this make sure the kernal iodakv2 is installed
Good luck:good:
I can in tegra overclock max set GPU freg 416MHz, CPU is ok 1,7GHz, how to set GPU higher frequency? I have before instaled iodak_v02 kernel, max GPU was 520MHz.
dann1989 said:
I can in tegra overclock max set GPU freg 416MHz, CPU is ok 1,7GHz, how to set GPU higher frequency? I have before instaled iodak_v02 kernel, max GPU was 520MHz.
Click to expand...
Click to collapse
Download trickster mod kernel settings, you can use this to raise the max gpu threshold
Sent from my rooted P880
plz cvm instaled
Whether there are improvements in battery?
Wifi not work for me and its not working on cyngmod
Sent from my LG-P880 using xda premium
emre81tr said:
Wifi not work for me and its not working on cyngmod
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
This kernel is not made for Cmod
Sent from my rooted P880
Thread under construction.
Telegram Group:
https://telegram.me/joinchat/AaNP4D9jSkt-Gac8_rfbHw
Main features:
Compiled with Linaro 6.1 Toolchain.
Linaro Stable Kernel 15.09 Merged.
Latest Google Kernel-Common Merged.
Latest Linux Stable 3.18.y branch Merged.
MNGS: OC to 2x2.8GHz,UC to 0.5GHz; A53: OC to 1.8GHz
Exynos MP voltage control
Zen-Tune v4.5
Fading LED and LED Controls
Ofast Optimizations.
I/O scheduler improvements
Scheduler improvements
Linaro's Power Efficient Workqueue.
DVFS improvements. (automatic reset to prevent cpufreq_(min,max)_limit getting stuck)
Binder Improvements.
CPUidle improvements.
Backport latest crypto algorithm.
Backport latest random driver.
Details could be found in Github commits page:
https://github.com/jesec/android_kernel_samsung_universal8890/commits/tw-6.0
Contributors:
https://github.com/jesec/android_kernel_samsung_universal8890/graphs/contributors
BUG:
NULL
Download:
All Exynos-based S7 Edge including G935S/K/L is compatiable with this kernel.
But I only test it on my G935F.
https://www.androidfilehost.com/?fid=24651430732235844
Old Version:
View attachment G935-JESSE-KERNEL-V1.0.3.zip
View attachment G935-JESSE-KERNEL-V0.6.zip
Answer to question like "Did this kernel compatible with xxx ROM" should be always "YES".
Feedback if this kernel could not boot with the ROM you choose but DO NOT ask question like this anymore. Thanks.
For ROM developers:
Feel free to add this kernel to your ROM.
You don't have to ask for my permission.
Place my Kernel to /kernel/jesse-kernel.zip.
And then add these to your script.
Code:
package_extract_dir("kernel", "/tmp/kernel");
run_program("/sbin/busybox", "unzip", "/tmp/kernel/jesse-kernel.zip", "META-INF/com/google/android/*", "-d", "/tmp/kernel");
run_program("/sbin/busybox", "sh", "/tmp/kernel/META-INF/com/google/android/update-binary", "dummy", "1", "/tmp/kernel/jesse-kernel.zip");
NOTICE:
Patch to fingerprint problem is not in kernel space, instead, it is in system space.
Thanks for your support to GPL, but it is fair to copyright a system space patch.
Patch to fingerprint problem is copyrighted and under Apache 2.0 license.
According to Apache 2.0 License, please give me proper credit.
Failure to comply may lead to prohibition of the use of this method to fix fingerprint problem.
Any GPL breaker are not allowed to use this patch.
Support:
Click Thanks! to show your appreciation to my works.
Source Code: https://github.com/jesec/android_kernel_samsung_universal8890.git
Screenshots:
Power Efficiency(provided by a user)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Geekbench Score(Ran just now without any special tweaks)
(Varies from 6400 to 7000)
Geekbench Score(Benchmark Configs)
Changelogs:
Version 1.3.1 changelog:
1. Backported Chacha20-based random driver from Linux 4.8, 15x random generator performance.
2. Updated GPU driver to r12p0. (20% graphics performance improvement)
3. Merged latest stock kernel.
Note that you can NOT switch to another kernel WITHOUT reflash the ROM after flash this version unless they update the GPU driver.
V0.6->V1.3 Changelog:
Work in Progress.
V0.6 Changelog:
Linux 3.18.35 Merged.
Frequency table stabilized.
Hotplug latency reduced.
Big and little core UC to 300MHz.
Interactive governor latency reduced.
V0.5:
Switch to Linaro 6.1 ToolChain
Determine whether OC or not by ASV level
Code:
New policy:
For Grade D,E phones (asv_big < 7), use stock freq_table: 2.7GHz (2 cores online),2.5GHz (4 cores online)
For Grade C (asv_big < 11) phones, use mid OC freq_table: 2x2.8GHz,4x2.6GHz
Grade A,B (asv_big >= 11) phones? That's amazing, let's unleash the Exynos: 2x2.9GHz,4x2.8GHz
Fingerprint Boost (no lags anymore)
Fading LED when charging
V0.3.1:
External SD card issue fixed.
Add Fading LED and LED Controls
2 binder improvements
Disable software CRCs (+30% Performance)
readahead and int_sqrt optimizations
V0.3: (First Public Release)
Enable TEE and FP sensor again. (FP fixed)
SPI improvements.
CFQ I/O scheduler improvements. (Make CFQ default to IOPS mode to reduce 60% I/O latency)
Implement zen-tune v4.5 and enable by default. (50% scheduler latency reduced)
Code:
Allow lockless wakeup:
nr_thrms-beforems-after
16 0.05900.0215
32 0.03960.0220
48 0.04170.0182
64 0.05360.0236
80 0.04140.0097
96 0.06720.0152
Memory Management Improvements
V0.2:
Add Exynos MP voltage control
MNGS: OC to 2x2.8GHz; A53: OC to 1.8GHz
Disable TEE
Merge remote-tracking branch 'google-common/android-3.18'
Linux 3.18.33 -> 3.18.34
DVFS improvements. (automatic reset to prevent cpufreq_(min,max)_limit getting stuck)
Add Frandom and use it in file system.
CPUidle improvements.
Backport latest crypto algorithm.
Backport latest random driver.
MNGS: OC to 2.7GHz,UC to 0.5GHz
Merge tag 'lsk-v3.18-15.09-android' of linaro-lsk
V0.1
add compiler-based optimizations
Merge Linux 3.18.33
What's the next? (Upcoming features)
1. Port CAF HMP and CAF interactive governor.
2. Dynamic Thermal Control(IPA) from ARM.
3. Perfect GPU overclocking.
Future:
Port Energy Aware Scheduler from Linaro.
(I need an accurate energy model before I could port EAS)
Thanks for your hard-work and finally see the first customer kernel with FP function come to s7 edge community!
Fantastic work Jesse!! Congratulations on posting the first custom kernel with fingerprint support!
I will test it right away.
Could You add 930F Support? (Flat S7)
krogoth said:
Could You add 930F Support? (Flat S7)
Click to expand...
Click to collapse
I will try to make one tomorrow.
Jesse Chan said:
I will try to make one tomorrow.
Click to expand...
Click to collapse
Can you add ROW scheduler?
Gesendet von meinem SM-G930F mit Tapatalk
Full synapse working ?
iamnotkurtcobain said:
Can you add ROW scheduler?
Gesendet von meinem SM-G930F mit Tapatalk
Click to expand...
Click to collapse
I will add it in later versions.
ManDone.vRs said:
Full synapse working ?
Click to expand...
Click to collapse
No synapse support yet.
But sd card is not detecting after installing the kernel
Sent from my SM-G935F using Tapatalk
sagarb said:
But sd card is not detecting after installing the kernel
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I don't use a SD card now.
I will try it asap.
Good Job!!
Jesse Chan said:
I don't use a SD card now.
Click to expand...
Click to collapse
But I'm using sd card it's not detecting please look in next release kernel is blazing fast I'm using this with king rom ty for awsome work and congrats for first kernel with FP working [emoji106]
Sent from my SM-G935F using Tapatalk
Great work getting the kernel out won't use until SDCard is working though, but still, well done on getting the kernel booting
Jesse Chan said:
I will try to make one tomorrow.
Click to expand...
Click to collapse
hi Jesse-Chan,
nice seeing you here.
I have now a S7 flat.
waiting for your version of kernel.
thanks.
karl0ss said:
Great work getting the kernel out won't use until SDCard is working though, but still, well done on getting the kernel booting
Click to expand...
Click to collapse
sagarb said:
But I'm using sd card it's not detecting please look in next release kernel is blazing fast I'm using this with king rom ty for awsome work and congrats for first kernel with FP working [emoji106]
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
sagarb said:
But sd card is not detecting after installing the kernel
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I will buy a Micro SD card and then fix this problem soon.
stefanz08 said:
hi Jesse-Chan,
nice seeing you here.
I have now a S7 flat.
waiting for your version of kernel.
thanks.
Click to expand...
Click to collapse
Kernel for S7 Flat will release tomorrow.
Wow sounds great!
any plans for implementing D2TW?
@Jesse Chan absolutely great job and a huge many thanks to you...you deserve much much credit
"And on that bombshell!"
Sent from my Gorgeous Echoe driven AEL Kernel Powered G935F
@Jesse Chan. Looks good. Awesome.
Sent from my SM-G935F using XDA-Developers mobile app