i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
tqsdyy said:
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
Click to expand...
Click to collapse
I think your screen is deffective..? no other user has reported this issue
Sunderwear said:
I think your screen is deffective..? no other user has reported this issue
Click to expand...
Click to collapse
after many trials, i used boot.tar.md5 for BL and succesfully got back rooted on 4.3, however, i cant make phone calles, text messages are fine though, and hte screen, of course, works great . i rooted 4.3 then i followed your step for rooted 4.3 to 4.4.2 and i succefully installed it and the touch screen is not reponding, not at all, but only with one touch to unlock it, and after unlock, i cant do nothing. and most of the time i cant even unlock it. i am fine with rooted 4.3 or unrooted whatever, i jsut need a phone badly... please help me. when i try to make a phone call, after i pressed "call" nothing happens, the phone froze, yet people im dialing can receive the phone call, just that they cnat hear me.
(im not sure if this is a stupid question , but will there be an ODIN restore for 4.4.2? if yes, how long will it be released? i think the fact i cant make phone calls actually contributed by the wrong bootloader, (or i might be wrong). thanks a lot man, i know you're great! really appreaciate your work on rooting 4.3)
Related
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it
lol4it said:
Hello everbody,
im kinda in despair..
my sgn screen stays black whatever i do.
But i can "use" it. Odin recognize it etc..
is my screen broken or "just" a brick?
it happend after i flashed through odin.
will samsung repair it for free?
Click to expand...
Click to collapse
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first
zacthespack said:
did odin say the flash was successful, did you unplug the device before it finished booting and its likely samsung will not repair it for free unless you can convince them its not because you where messing with it
Click to expand...
Click to collapse
yes odin said it was successfull..
vijai2011 said:
Comin from one of those dodgy I9770 ICS roms?If so try flashing any older stock gb rom first
Click to expand...
Click to collapse
yes.. where can i get such an older stock gb rom?
lol4it said:
yes odin said it was successfull..
yes.. where can i get such an older stock gb rom?
Click to expand...
Click to collapse
They in development section.Its a sticky thread.BTW if you dont bother about loosing your sd-card data and about binary counter,flash darkyrom 3.4-RE.Since it repartitions your phone,you must be fine...
i dont care about dat data... backuped everthing..
i just want my phone to work..
lol4it said:
i dont care about dat data... backuped everthing..
i just want my phone to work..
Click to expand...
Click to collapse
Ok thn better flash darkyrom_note 3.4 RE.Its in development section.But it will increase the counter and give yellow triangle for sure...
where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/
lol4it said:
where can i find RE i only find EE..
EDIT: found:
http://www.darkyrom.com/community/i...darkyrom_note-v3-4-resurrection-edition.7668/
Click to expand...
Click to collapse
Yeah thats the one...
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
theres written in blue RESET in odin.. what shall i do?
EDIT:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> boot.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> data.img
<ID:0/003> zImage
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
ok finished but my screen is still black Oo
EDIT 2:
said nothing.. i love u dude and i dont care about dat triangle..
So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Sonicboom9004 said:
So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Click to expand...
Click to collapse
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
xmayhemreturnsx said:
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
I've downloaded the T-mobile 5.1.1 version because I have not found a MetroPCS version. I hope that is the version I had before.
I downloaded it from here: http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387 (the first link)
EDIT: Currently going to try this out. I'll let you know if it works or not: http://forum.xda-developers.com/tmo...x-recovery-seandroid-enforcing-error-t3144011
EDIT 2: Doesn't work it just says md5 file invalid. Binary Check Failed.
EDIT 3: FIXED MY PHONE I just used the latest version of 5.1.1. Thanks for pointing me in the right direction xmayhemreturnsx. Link for the latest version for anyone else who needs help:http://forum.xda-developers.com/tmo...firmware-g920tuvu3doi1-g920tuvu2doh6-t3213001
HI
I have Note 5 sm-n920c from UAE and I change it to stock Russian rom now I'm trying to get back to UAE rom but I cant
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any stock rom that I flashed for 920c uae , xsg ,tur, finish with this error and phone stuck in downloading.but the strange thing is that I can flash Russian rom (that I currently) use with no problems, I'm using stock cable oem unlock changed USB port, even PC but cant get it to work smart switch cant initialize phone in emergency mode
any help or advice ?
thanks
bisermarchev said:
HI
I have Note 5 sm-n920c from UAE and I change it to stock Russian rom now I'm trying to get back to UAE rom but I cant
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any stock rom that I flashed for 920c uae , xsg ,tur, finish with this error and phone stuck in downloading.but the strange thing is that I can flash Russian rom (that I currently) use with no problems, I'm using stock cable oem unlock changed USB port, even PC but cant get it to work smart switch cant initialize phone in emergency mode
any help or advice ?
thanks
Click to expand...
Click to collapse
Check to see if you get FRP lock message on your screen when you flash, also before flash any other rom go to developer settings, then turn on OEM unlock first.
If you don't know how to unlock developer options in setting then please do a search on xda and you will find it for sure. Hope it helps.
Delete hidden.img form the archive and repack
can someone help me, I tried to root my device and I ended up with an FRP lock cant go into recovery, tried to flash the Stock ROM still failed, I tried looking solutions but can't find any hoping for someone more experienced than me for help I'm stuck the with boot loop, also here is the Odin log's,
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3485 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
zombiemagnet said:
can someone help me, I tried to root my device and I ended up with an FRP lock cant go into recovery, tried to flash the Stock ROM still failed, I tried looking solutions but can't find any hoping for someone more experienced than me for help I'm stuck the with boot loop, also here is the Odin log's,
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3485 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> FAIL!
Click to expand...
Click to collapse
Flash a firmware at least equal to the version your device currently running, or newer. It will fail if you downgrade.
Scurzmann said:
Flash a firmware at least equal to the version your device currently running, or newer. It will fail if you downgrade.
Click to expand...
Click to collapse
thank you, I found the right stock firmware for my device
hi, im having the same problem. Where did you get your stock firmware?
theymbunman said:
hi, im having the same problem. Where did you get your stock firmware?
Click to expand...
Click to collapse
do you have the same model as mine?
I found mine at
https://galaxynote5root.com/note-5-stock-firmwares/
hope it helps
zombiemagnet said:
do you have the same model as mine?
Click to expand...
Click to collapse
I'm using N920C. We have exact problem in flashing stock rom using Odin.
theymbunman said:
I'm using N920C. We have exact problem in flashing stock rom using Odin.
Click to expand...
Click to collapse
ahhh, then you need
https://www.theandroidsoul.com/samsung-galaxy-note-5-firmware/
it has all the stock model firmware you can easily find one here
Use smart switch,I had the same problems but after connecting to smart switch it went smoothly
Hey Everyone,
New to this, so excuse my ignorance, but I was attempting to remove the FRP lock from a tablet E (SM-T377P) I purchased from a few from a company that used them.. Flashed it with stock firmware thinking it would just remove the lock (again, new) and clearly that isn't the case. Did some searching and found some firmware on here that actually put 5.1.1 and since I wasn't thinking, flashed that version on the tablet with odin 3.14. Device now only goes into factory mode and I cannot flash with either the combination file or stock firmware for 6 or 7, getting error Fused 3/Binary 2). Not really sure where to go from here, if anywhere, if there is anyone that could offer any help that would be great. (Not new to computers or tech, so I am pretty literate with any questions).
Odin Error is...
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 2360 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks
Still looking for some help, thanks!
Update: Was able to find a fix and its working now!