DO NOT post in this thread until you have read the first three posts and last two pages of this thread in their entirety!
"Me Too" posts for known issues with no useful debugging information WILL BE REPORTED.
What is Omni?
Omni Gerrit Review
OmniLog - changelog
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
ROM:
Omni for Samsung Galaxy S 4
Gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
(recommend the MODULAR FULL package, however, keep in mind that the STOCK package is intended for Nexus devices)
UPDATE FROM VARIANT OMNI BUILD TO UNIFIED BUILD
Backup your apps and other pertinent data and DO A FULL WIPE.
Don't complain about it. Just do it. If you try to post bug reports or complaints and you have not conducted a wipe of:
/system
/data
/cache
/dalvik
I will completely and utterly ignore you, as well as report your post for not reading the clearly posted rules at the top of this post.
UPDATE FROM OMNI VIA OPEN DELTA UPDATER
Settings -> System Updates -> Check for update
You will NOT need to wipe anything with the delta updates unless it is explicitly stated or you start having strange issues.
Omni only supports TWRP recovery, use any alternate recovery at your own risk.
Kernel Source: https://github.com/omnirom/android_kernel_samsung_jf
XDA:DevDB Information
Omni for Galaxy S4, ROM for the Samsung Galaxy S 4
Contributors
jakew02, xplodwild
Source Code: http://www.github.com/omnirom/
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2014-05-28
Last Updated 2015-04-20
Important Information
This is NOT the place to ask questions like:
When will <feature> be included?
Is <feature> included yet?
Can you bring <feature> to Omni?
ETAs of any nature
Follow the rules. This is a new thread and it WILL remain clean and ON TOPIC. I will immediately report any off-topic posts, trolling, flaming, etc. of any sort. This is a DEVELOPMENT thread, and as such, has been posted in the DEVELOPMENT section.
INCLUDE LOGS when reported a bug. Even if you think that you might be the only one with the bug, POST LOGS, that will help narrow down the issue about 100 million times!
Explore the ROM a bit before posting here things like " WHERE IS <feature> CAN YOU ADD FEATURE etc. etc.
You have to understand, that gets extremely annoying after 50 posts like that. Most features can be seen on the blog or in the MERGED section of gerrit.
Root IS NOT included with Omni by default, so you will need to flash SuperSU in recovery SuperSU
How to build Omni from sources:
OmniROM - Setting Up A Compile Environment
Bug Reports and Feature Requests
jira.omnirom.org
Important Information Part 2
Omni XDA Discussion ( NOT DEVICE RELATED DISCUSSION ONLY)
http://forum.xda-developers.com/omni
IRC
Web Client
irc.freenode.net
#omni
First
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
rabiny said:
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
Click to expand...
Click to collapse
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
buzzwyzr said:
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I just flashed the 05/28 nightly (on my jfltespr) with the 4-16 Minimal PA Gapps with absolutely no errors. This most definitely sounds like a Gapps problem to me, since the SetupWizard is not packaged or built with the ROM, but instead flashed with Gapps. This is why if you were to NOT flash a Gapps package, you don't have to run through it.
jakew02 said:
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
Click to expand...
Click to collapse
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
rabiny said:
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
Click to expand...
Click to collapse
If you are already running Omni then you're fine. Just follow the instructions from the OP.
These instructions are written under the assumption that you know how to root and install a custom recovery.
Sent from my X9006 using Tapatalk
Is custom hot word launcher built in yet?
ahoslc said:
Is custom hot word launcher built in yet?
Click to expand...
Click to collapse
Yes. I've been using it and it works perfectly fine.
You can see that from gerrit as well as the XDA News Portal...
I'm squashing questions like this now. Please re-read Post 2 as I have updated it.
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
bala_gamer said:
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
Click to expand...
Click to collapse
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
djbootleg said:
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
Click to expand...
Click to collapse
These aren't issues or bugs at all; you just haven't looked around the settings.
all of your questions can be answered by just looking through the settings.
OP updated, please re-read it.
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Shaftamle said:
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Click to expand...
Click to collapse
It's 183mb, I've just flashed. Working fine.
ZordanKV said:
It's 183mb, I've just flashed. Working fine.
Click to expand...
Click to collapse
Have you tried flashing a custom kernel with the latest nightlys?
bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
Nope, already switched to the other ROM. Omni is good, but doesn't suit my needs
bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
gpu drivers fixed
jakew02 said:
i have stated multiple times that kernel developers will need to begin released "omni-based" kernels.
I WILL NOT alter this ROM to accommodate custom kernels. the kernels need to change to be compatible with the ROM.
Custom kernels will not just magically start working. Kernel developers need to remove the flo adreno drivers and related commits from their kernels. If they don't know which commits those are, they can simply cherry-pick this commit: https://github.com/omnirom/android_kernel_samsung_jf/commit/068449af3996f1072c80dcc4a09a88af43abd7f7
contained in that commit is all of the reverts needed to make a cyanogenmod-based kernel work with Omni.
I have spoken with @Entropy512 about this a few times and we both agreed that we will NOT be altering the ROM in order to this one device to be able to use flo adreno stuff. That's just stupid and causes more work and problems for everyone else.
So the bottom line on this is, if you want a custom kernel, ask your kernel devs to cherry-pick the above commit and release Omni kernels separately from CM-based one.
If anyone has a problem with this, well, gerrit is free to use and open to all.
As before I will use this comparison to better justify my decision:
You wouldn't buy a Playstation controller(an accessory) to use with your Xbox(a primary), once you get home and realize it doesn't work because it's designed for something other than what you have, you call Microsoft and demand that they make the Xbox(primary) work with Playstation controllers(accessory)?
Absolutely Not. If ANYTHING, you would call Sony and demand that they make their controllers(accessory) work with the xbox system.
Hope this clarifies that issue a little better for everyone.
Also on another note:
I have narrowed down the camera preview freeze down to one repository
Click to expand...
Click to collapse
Jake the only reason I asked was because I did a bit of testing for you where the testbuild had support for custom kernels and you said that it should be fixed and you would push the change when you could. I even followed up with you at a later time and you said you hadn't had time/inclination to do it yet. I'm not demanding anything of you and I didn't want to bug you with the issue so I asked someone else who was in similar territory. Had I known about your changed stance on the issue, I wouldn't have brought it up.
Related
Hello all! I want to introduce my first ROM that I built from github and the repos. It is my first time building from source, so I am happy about it . Some of you may know who I am from the MyTouch 4G thread, since I ported ROMs on there (you know who you all are).
First off, I want to give a huge thanks to @DJLamontagneIII for helping me with all my problems and allowing me to use his repos for this ROM. And for letting me post this. This whole ROM is made from his repos, but it is for the Nexus 7 (Flo), but I have brought it over for the Nexus 4 (Mako)!
Other thanks go out to CyanogenMod (and team), @klvnhng for his guide, @inffy for his guide, @obtained, @TheDarkDefender, @Cristiano Matos, @Der_Schubi, and whoever else I forgot
Check out @DJLamontagneIII's ROM for the Flo here: http://forum.xda-developers.com/showthread.php?t=2391779
*No Linaro, as I don't know how to build with it yet. I believe it's placebo, so I probably will not include it.
Now I want this ROM to be about you all too! So if you want cherry picks to be made, just tell me by replying to this thread, and I will consider adding it. Be sure that it is a good pick, e.g. a cool feature or improvement. I will pick what I see is good as well. It does not have to be from Cyanogen's gerrit, but from a github repo as well. For the github repo, it need's to be cm10.2 based or I will not do it. I may not be able to merge it, but I will do my best.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Check 2nd post for download link(s) and changelog
HOW TO INSTALL
Do not use PA gapps. Use Banks or goo.im versions is suggested.
1st Time Installing
Download the zip
Download compatible Gapps
Reboot to TWRP, or CWM
WIPE DATA/FACTORY RESET
Flash the zip
Flash Gapps
Reboot
Already Installed CM10.2 (or any CM10.2 based ROM)
Download the zip
Reboot to TWRP, or CWM
WIPE Cache
WIPE Dalvik Cache
Flash the zip
(Optional) Flash updated Gapps
(Optional) Fix Permissions
Reboot
*if from cm10.2 based ROM, you may have to adjust some settings for the tweaks you have made
ROOT IS WORKING BUT IT NEEDS TO BE ENABLED
1. Enable developer option by pressing build number 7 times in settings>about
2. Enable usb debugging and set root access to adb + apps in developer settings
3. root should now work
Titanium backup Users
1. In tb go to menu>preferences>backup folder location
2. Navigate to storage/emulated/legacy
3. Select your Backup folder and Select "Use the current folder"
4. Then it will ask you to move backup to that folder.... Select that
5. Restart app and restore.
MISC LINKS
Gapps (that I recommend)
DJLaMontagneIII's Github
CyanogenMod Github
CyanogenMod Review
ROM Link
http://d-h.st/Nu3
*mirrors are welcomed
*If there are any bugs, I will TRY and do my best to fix it. Since it is from another user's repo, I will have to wait until it gets fixed by him. Sorry
*Updates to the ROM will happen when the actual dev updates his git. Also, my updates may be infrequent since I am at University, and may have no time until (hopefully) the weekends. *school sucks*
Changelog
Latest CM Source
AOKP custom system animations
HALO Code Cleaning
Active display: Respect Quiet Hours
Active display: Option to change display timeout
Active display: Don't register proximity if pocket mode not used
Active display: Fix "turn off display if device gets pocketed again"
Active display: Unify (un)registering callbacks and add proper checks
Active display: Fix for HDPI devices
Active display: Make GlowPadView center the current notification icon
Active display: allow hiding low priority notifications
Active display: Add threshold to proximity sensor
Fix tiny nav bar back icon at certain DPI's
Revert: Add App Ops shortcut to settings Header.. (App Ops can be accessed in Privacy Guard now)
cherry-picks from CM gerrit, like Gallery2, DSPManager, CMUpdater, Focal, and Mms. look at http://fitsnugly.euroskank.com/?rom=cm10&device=maguro (a lot is from this list)
Wifi name option in statusbar
Reverted "mako: Enable additional power modes" - this will possibly help to not get reboots when using faux with c3 on in SOC
Some fixes that I cherry-picked that were needed in my eyes
More... Full changes on DJLaMontagneIII's git
check here: http://forum.xda-developers.com/showpost.php?p=44266619&postcount=2
Bugs:
enabling or disabling "Dark Droid/Nexus/UI" causes the phone to lose coverage (no signal bars). just toggle Airplane Mode on/off then the signal will be back
Extras
http://d-h.st/users/chickenfactory/?fld_id=24346#files
openpdroid files (for enhanced privacy!)
look for the one that matches the ROM name (the date will match up)
Looks good! I will try it it later today! Thanks for your work!
Sent from my Nexus 4 using Tapatalk 4
Sweet! Downloading. Any further customization? Like Status bar transparency?
Wow! Nice! Someone who ports the amazing djlamontagnell work to n4, I used his ROM on grouper and it was fantastic!. Plus I know u from CK thread, wish u luck and for sure I will try it!
Enviado desde mi Nexus 4 usando Tapatalk 4
Sblast said:
Sweet! Downloading. Any further customization? Like Status bar transparency?
Click to expand...
Click to collapse
Yes, there is transparency
0.0 said:
Yes, there is transparency
Click to expand...
Click to collapse
Beautiful ROM, thank you!
I only wish CM's PIE was more responsive. I don't know why, I find myself sliding a few times, feeling the vibration, but the PIE doesn't come up.
Does anyone have any cherry picks they want to see in the build? I am going to try to build tonight
Hey Bro.I loved those ports you did on the glacier looking forward to trying this out.
K-JACKS said:
Hey Bro.I loved those ports you did on the glacier looking forward to trying this out.
Click to expand...
Click to collapse
Glad to see a familiar user on the N4 forums
0.0 said:
Glad to see a familiar user on the N4 forums
Click to expand...
Click to collapse
+1 -- My thoughts exactly:laugh:
how quickly things end...
sorry, but I will be shutting down this thread. I am having trouble building and updating this ROM successfully. idk why I am getting errors. a mod will be notified to close this thread
to use a similar ROM, crDroid is one I recommend. even CyanKang is good also
0.0 said:
how quickly things end...
sorry, but I will be shutting down this thread. I am having trouble building and updating this ROM successfully. idk why I am getting errors. a mod will be notified to close this thread
to use a similar ROM, crDroid is one I recommend. even CyanKang is good also
Click to expand...
Click to collapse
Thats too bad! at least you gave it a shot.Just next time if you want some testers prior to posting let me know if I have time i can help out,depending on if I am not too busy and have some free time that i can spare putting a non daily on my phone..I have spares of all the ones in my sig ,but use mako as my main
so...I am back, and this time, the ROM built successfully! but, I need testing on it. if all is well, I will update the OP
I just synced DJL's github and added couple of picks from the cm gerrit for vendor/cm. it's to resolve those deep sleep problems i've been reading about. idk if it worked, but that's why you guys can test
so you know the drill. backup, backup, and BACKUP! I am not responsible to what happens. i'm sure everything will be alright though.
http://d-h.st/p97
thanks :good:
Works nicely so far. I will keep an eye on the deep sleep.
Once again, I am having trouble building from source. I have no clue when another build will arrive. I may have to wait for the dev to fix up some code. Luckily, this ROM is interchangeable, meaning you can flash crDroid on top of this and it will not ruin anything! that's the good part about having cm10.2 as base
first of all, I want to thank those who tested out the test ROM that I posted earlier and replied. @AcmE85, thank you
next...I was able to build successfully! so a new build will be up soon
I will also update the first post
edit:
DJLamontagneIII said:
Update is up in OP... Two known bugs in the new additions... NavBar buttons don't hide on lockscreen but are still inactive, and legacy menu button wont show the three dot icon but still works where ever you set it to be.
Click to expand...
Click to collapse
it's up! . check second post for download
looking good sir. you should create a decent name for your rom though!
deepo75 said:
looking good sir. you should create a decent name for your rom though!
Click to expand...
Click to collapse
a name? lol. since it really isn't my source, I feel like I don't have the right to name it
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Downloads - Download the rom, gapps and other addons.
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Forum
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimRoms, ROM for the Motorola Droid RAZR HD
Contributors
darkspadez, SlimRoms
Version Information
Status: Testing
Created 2014-07-01
Last Updated 2014-07-01
Reserved For Future use
Also Reserved
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Awesome awesome!! Been waiting in anticipation for this will try as soon as possible!
EDIT: Ok, I have only had limited time to test. But briefly put things looks promising here:
Installed without any problems (using latest TWRP in my case).The same bugs that exist in CM 11 are also present here, which is it to be expected (e.g. broken video playback). This is perfectly natural for such an early release and no doubt these will get sorted out as development progress. I am glad to try out this early build. For an alpha it seems very stable and definitely looks promising! I initially tried the official Slim Gapps (as linked to). They seemed fine. Since then I have installed ART compatible Gapps from the CM thread (13/11 i believe). Now running in ART runtime mode. Yes this does introduce some problems and not all apps are compatible, however from my experience ART also introduce a previously unseen level of smoothness. Will continue to use this the next days and of cause eagerly follow development.
@darkspadez (and all other other involved devs of cause): Congrazt on this first public SlimKat build for our phones!
Sent from my XT925 using Tapatalk
SVLAN said:
Wow this is great. I hope someone port this to atrix hd.
---------- Post added at 01:59 AM ---------- Previous post was at 01:51 AM ----------
Which of these models is gsm so i can try flashing this on atrix hd?
Click to expand...
Click to collapse
925 is GSM.
help
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I am using latest twrp recovery found here in the RAZR development forum. I can't say if this the best option though. I can only say that in my case it worked fine (install, backup and restore).
I'm one of the devices running the buggy EMMC.
Error is the same as all the others (I wish there were a kernel fix for it):
set_metadata_recursive: some changes failed
Back to the drawing board...
DizzyFox said:
I would love to try this ROM but can't seem to get my cmw recovery updated I down loaded the zip mentioned correct version thru ROMmanager and flashed it . But when I go to cmw recovery it still shows older version. Tried flashing it with that but gives me the dead android. Have to restore
Click to expand...
Click to collapse
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
projekt8e said:
I was flashing fine with cwm 6.0.3.6 for the epinter build. I did finally update, but I had to use a .bat file in conjunction with a special fastboot.exe file to actually upgrade the recovery, because otherwise it would just fail to upload. I was having backup issues with TWRP, so I just stick with CWM now. Haven't had any issues. If you want to try that .bat .exe combo I found, let me know.
Click to expand...
Click to collapse
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
DizzyFox said:
I was wanting to keep cmw also but can't figure out how to install or flash the new version that this ROM requires.
Click to expand...
Click to collapse
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
I was expecting to read about the ROM, but only see comments about recoveries. Any comments on the ROM? Video recording/playback is working?
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
SVLAN said:
Working great on atrix hd other then i get no signal. Everything else seen to work. I also had to edit the build.prop to change the resolution to 320 so it doesn't look so small on my atrix hd
Click to expand...
Click to collapse
What kind of video playback works for you? YouTube? MX Player with S/W decoding?
So far yt and netflix
SVLAN said:
So far yt and netflix
Click to expand...
Click to collapse
Wonder when this was commited to compile. I see a bunch of changes related to this in the gerrit and wonder if CM11 will be getting this tonight as well.
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
SVLAN said:
Yeah I wonder the same as well. Maybe @skeevydude be able to fix few things with these commits for aosp 4.4
Click to expand...
Click to collapse
Do you have any print services in Settings?
Spidinator said:
I just flashed the CWM this morning via fastboot and everything went fine. Have you tried that way?
Sent from my XT925 using Tapatalk
Click to expand...
Click to collapse
I must not have my PC set right. I get my phone in fastboot but when I try to open fastboot it just blinks and disappears. I may just have to try putting trwp on my phone. Thanks you are all a great bunch of gentlemen
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads:
CM server
Installation:
Unlock the bootloader
Flash a recovery
Reboot into recovery
Flash rom.
Reporting bugs:
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Report bugs on Jira at jira.cyanogenmod.org
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your:
Phone model:
CM Download url:
Gapps version:
Radio (baseband):
CM version:
Did you:
Install xposed framework?
Restore apps in titanium backup?
Flash another kernel?
Are you using a supported recovery?
start Art Runtime?
search the thread for similar issues before posting?
I don't reply to tech support by pm or emails/hangouts messages.
If you have xposed installed, please bother to post.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Offiical cm for peregrine, ROM for the Moto G
Contributors
Somcom3X, @BlueFlame4
Source Code: http://www.github.com/CyanogenMod
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader with recovery
Version Information
Status: Beta
Created 2014-11-24
Last Updated 2015-04-20
Reserved
I present to you CyanogenMod 12 for the peregrine. After delaying my initial release to an almost fully working state, it is here now.
Video review:
Big thanks to @Cm9aphla
Bugs:
Wifi tether (Experimenting)
Bluetooth stack issues with multitasking. Somewhat buggy
GPS issues as well.
Reserved
Big thank you to all of the donators:
Please confirm your username by posting the remainder of the transaction ID. To donate, please send to [email protected] via paypal
Donators
Code:
S. Fabbro 4HR94540AN4xxxxxx
D. Noonburg 604068013C4xxxxxx
G. Girotto 9SH91349CF4xxxxxx
Gracias!
New recovery is in the works, stay tuned.
If anyone needs some assistance, join #cyanogenmod or #carbonrom on irc.
I'll be in #carbonrom-dev most of the time.
If no one responds instantly, simply wait. Don't be this guy (You know who you are):
Code:
[22:57:18] --> carbon_guest ([email protected]/web/freenode/ip.97.xx.3.xx) has joined #teamcarbon
[22:58:19] <carbon_guest> I'm having an issue, this is my first time trying the carbon ROM the installation
was succesful but every time i try to install the GAPPS it gives me an error and says (Satus 6), any aid please?
[23:01:02] <carbon_guest> anybody here?
[23:10:06] <carbon_guest> hellooooooooooooooooooooooooooooooooooooooooo
[23:26:12] <-- carbon_guest ([email protected]/web/freenode/ip.97.xx.3.xx) has quit (Quit: Page closed)
Great work! I'll stay here until official 5.0 ota arrives. [emoji16]
Which superuser flashable zip should I use? The ones I used in KK don't work.
---------- Post added at 10:33 PM ---------- Previous post was at 10:33 PM ----------
And the ROM is rock solid, congrats!
Awesomeness, grabbing it now and will run it through the paces.
@Somcom3X
great work man =D
Bugs that I saw:
Wifi Tether (mentioned on op)
CPU Clock on 1190 almost all the time when the screen is on
@Somcom3X Excellent release! Though I've encountered a few issues apart from the mentioned ones.
AOSP keyboard gesture swiping does not work
Power Off does not work
Notification sound does not work. Tried changing it a few times but none of which works. It vibrates though.
Notification LED doesn't work? I don't think it's working or how it's intended to work in 5.0 Lollipop, but Pulse Notification light is turned on (This seems to work for alarms though)
Random Settings force closes
Maps is not working -- I know it's totally unrelated but it could be GPS related as it just kept showing "Waiting for location..."
Some apps are left even after clearing all apps. ie: SuperSU requests, Contacts, app installs.
Volume rocker for Media Volume gets stuck at a certain point, though it's only a visual bug.
Crossed out stuff just suddenly worked. lol
Is it possible to get Busybox working on CM12 too? Can't find one that would install.
Using this as a daily driver until I find something that wouldn't let me.
zackwire said:
Which superuser flashable zip should I use? The ones I used in KK don't work.
---------- Post added at 10:33 PM ---------- Previous post was at 10:33 PM ----------
And the ROM is rock solid, congrats!
Click to expand...
Click to collapse
I used this and it seems to be working fine. http://download.chainfire.eu/589/SuperSU/
I'm testing since you release the zip in the other thread (I was even about to suggest a new thread ).
I did a dirty flash from cm11, so, maybe some of my reports here are specific about doing dirty flash (just in case, remember to redo your lockscreen security, because the dirty flash made your lockscreen accept anything as password. Remaking the lockscreen security fix it).
* Stock camera doesn't work (shows image, but doesn't take photos, even after cleanup the application). Downloading the google camera or whatever other camera works (and it seems the camera bug from cm11 is gone).
* f2fs doesn't work, ext4 works but useless (you can't do anything, but the cm12 reads that there's a partition and with size, etc), exfat doesn't work either. The worse is: using any of the filesystems I said made you unable to even reformat de sdcard. Only fat works for me. Btw, I'm unable to copy from pc to sdcard.
Thanks
Downloading now. Thanks for posting, been waiting for a lollipop rom.
Edit:
Gps is working fine for me, camera works when it wants to, replaced the stock camera with a port from the apps section of this forum.. Google camera seems a bit more stable. Installed no frills cpu control and disabled safety valve and other apps being able to set frequency and I noticed while it still says min is 1.1 if you look at stats it will go to 300 like normal.
Guest Mode is enabled ?
settings crash sometimes, but it's working well
thanks for your great work
Hi. I'm so excited to install this, but I want to know if I'll be able to go back to KK if there is any problem
Thanks for all your hard work!
Great work man
Just out of curiosity, the thread name is "[ROM] unOfficial Cyanogenmod 12 4.4.4 for the Moto G 4G (Peregrine)".
CM12 is made after 5.0, not 4.4.4 - right?
Or am I misunderstanding what the 4.4.4 means?
Thanks!
athlantar said:
Just out of curiosity, the thread name is "[ROM] unOfficial Cyanogenmod 12 4.4.4 for the Moto G 4G (Peregrine)".
CM12 is made after 5.0, not 4.4.4 - right?
Or am I misunderstanding what the 4.4.4 means?
Thanks!
Click to expand...
Click to collapse
This is CM12 5.0
Probably just a typo by SomCom3X.
Can confirm lack of GPS signal lock. Could be the same bug with CM11.2 where you need to get it just right with a previous signal lock on stock and then flash. Otherwise, running extremely smoothly. Latest SuperSU Beta 2.27 gives root without any big problems, restoring TiBu as we speak. Also can confirm lack of swipe in stock keyboard. SD Card access is working. Great work!
Getting a GPS lock before you flash cm12 worked for me. That should be step one from now on before flashing any ROM. Just in case ya know. So far everything's running great.
Level99 said:
Can confirm lack of GPS signal lock. Could be the same bug with CM11.2 where you need to get it just right with a previous signal lock on stock and then flash. Otherwise, running extremely smoothly. Latest SuperSU Beta 2.27 gives root without any big problems, restoring TiBu as we speak. Also can confirm lack of swipe in stock keyboard. SD Card access is working. Great work!
Click to expand...
Click to collapse
I've read it's an issue with quite a bit of Motorola devices. The stock GPS trick is the best thing possible to do at the moment.
zackwire said:
Which superuser flashable zip should I use? The ones I used in KK don't work.
Click to expand...
Click to collapse
here you go mate
edit:
whoops someone posted it already ^^
mhh, better more links than no links
gr3ud said:
here you go mate
edit:
whoops someone posted it already ^^
mhh, better more links than no links
Click to expand...
Click to collapse
Okay, when already posting links, there is latest beta v 2.27
The Nexus Experience ROM...Bringing the Nexus to the Non-Nexus!
Hi everyone...This is my ROM based of CyanogenMod 12. I have added changed and made multiple improvements but it's based of CyanogenMod 12 by @albinoman887. I will be constantly making changes and adding multiple features. This ROM will get quick updates so make sure to always check back here for the latest and greatest. Also note that this is a new ROM just starting out and built from scratch...it has numerous possibilities so comment if you want a specific feature (either from another ROM or a new feature that will be exclusive to this ROM)!
DISCLAIMER
Code:
/*
* Your warranty is now void. Knox 0x1.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Supported Devices:
This ROM is supported by the following klte GSM devices:
kltexx
kltelra
kltetmo
kltecan
klteub
klteacg
kltedv
klte
***THIS ROM WILL NOT BE SUPPORTING CDMA KLTE DEVICE...EVER...SORRY!***
CDMA klte devices include:
kltespr (Sprint)
klteusc (Verizon)
Installation:
***The lastest version TWRP (2.8.1.0) or Philz CWM is recommended.***
NOTE: It is recommended you do a clean install. The instructions below show how to preform a clean install and install this ROM.
1. Download the appropriate ROM version you wish to install
2. Download the appropriate gapps
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
8. Flash the gapps.
9. WIPE DALVIK/CACHE
10. Reboot Device.
ROM Version Info
ROM Name: Nexus Experience ROM
ROM Version: 1.1
ROM Status: BETA
ROM OTA ID*: nerid002_klte
ROM md5checksum: bee300ec0c3c61d98d71946ea45ab169
*The OTA ID is used with the OTA updater in the ROM. When a update arrives, via OTA, the app will display a update OTA ID. This ID will hep you know which ROM version you are about to download.
WORKING
Service
Text
Data
Call
Audio
WiFi
Google Now
Bluetooth
GPS
MMS
Video playback
Audio playback
Internal/External SDcard mounting
Multiple User Support
Camera
Video recording
IR Blaster
NFC
Complete power menu
NOT WORKING
Adaptive Display
Changing Font Size/Design
You tell me!
ROM Features
Based of CM 12 source
Faster OS
OTA support
Added Int.d
Added libraries
Android 5.0 (and will continue to be updated to the latest version of Android)
Added Super SU
Device wakes when S-View Cover is lifted
Much, much, more
Upcoming Features:
Android 5.0.1
Double-Tap notification panel to sleep
Debloated CM
5 Ghz WiFi Support
Fixing /dev/block error that appears in recovery when flashing (the error makes no difference but still...it's annoying to see)
You tell me...this ROM is just starting and has endless possibilities
Download
Note: All downloads links in the OP post are via MEGA. I do allow other users to post mirrors in the comments below
Latest ROM Release:https://mega.co.nz/#!YtohwToA!ncpFaRh3IjPbsa9L9JiJh-pIRIl_xMmw5eu0Dm7lahY
Gapps:https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
Previous Versions
Version 1.0:https://mega.co.nz/#!4wBWFaIJ!IqbUK0QiyGoVdBhzVWElHCaucNDEEo7AjEF0-Nzia5w
Gapps:https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
md5checksum: f7740e16afadd9287d3066a2590416a2
Changelog
Version 1.0 [DEC 13]:
- Initial Release
Version 1.1 [DEC 14]:
- Fix 5 Ghz WiFi issue
- Debloated CM
- Battery life improvements
- Updater-Script tweaks
- Build.prop tweaks
***YOU CAN'T UPDATE TO THIS BUILD VIA THE OTA UPDATER APP...YOU MUST DOWNLOAD IT AND FLASH IT MANUALLY***
Version 1.2 [COMING SOON]:
- Fixing /dev/block error that appears in recovery when flashing
Click to expand...
Click to collapse
Credits:
ROM Maintainer: @Shawn5162
CM Device Maintainer: @albinoman887
CyanogenMod
Donations:
TO DONATE CLICK THE "DONATE TO ME" BUTTON ON THE LEFT SIDE OF THIS POST UNDER MY XDA USERNAME
ALL DONATIONS ARE GREATLY APPRECIATED
Sources:
Device Kernel: N/A (I haven't modified the stock kernel yet, but I will be in the future. Once I do I will post a GitHub link to my sources )
Device Tree:https://github.com/Team-Hydra?query=klte
CyanogenMod Git:https://github.com/CyanogenMod
Reserved by op
first. lol let's see how it runs.
edit. never mind, won't run on sprint. good luck
eloko said:
first. lol let's see how it runs.
edit. never mind, won't run on sprint. good luck
Click to expand...
Click to collapse
Thanks...working on a Sprint Version...might release it if enough people want it I will...Sorry for the inconvenience.
I'll check it out. Download is very slow. About 100kb/s I'll report back in an hour.
might upload to MEGA and leave a MEGA dl mirror
Sent from my XT1064 using XDA Free mobile app
Here is a mirror for you:
http://fs1.androidfilesharing.com/f39cf496399b5142
---------- Post added at 08:43 PM ---------- Previous post was at 08:43 PM ----------
androidfilesharing said:
Here is a mirror for you:
http://fs1.androidfilesharing.com/f39cf496399b5142
Click to expand...
Click to collapse
Working great too BTW!
Great
Sent from my XT1064 using XDA Free mobile app
putting in my request for klteSPR !!!!! THERE IS NO LOVE HERE IN THE GS5 FORUM FOR KLTE SPR . I am still in the beginning fase of learning how to compile and cook my own rom my experience on this gs5 forum has made me have to pick up the learning curve cause there is like no fun out there for klte spr i sit back and look through the forum and admire with great jealousy looking at all the great roms for a phone that i have in my hand but cant touch them was using bliss but now they have moved to 5.0 and are not suporting kltspr, the same with fusion and liquid was using them also now they are not supporting either
one more time ,,,,,,PLEASE SUPPORT KLTESPR ,i have seen post on other forums asking the same there is a very big segment of kltespr users that you would most likely make faithful followers ,they just need somewhere to go
THANKZ IN ADVANCE!!!!
SPRDAGOD8
(THE HOOD HACK.)
What is Adaptive Display?
seriallife said:
What is Adaptive Display?
Click to expand...
Click to collapse
When phone or tablet backlight changes due to the lighting your in. It adapts to the lighting.
jasonm253 said:
When phone or tablet backlight changes due to the lighting your in. It adapts to the lighting.
Click to expand...
Click to collapse
Thanks for helping explain it @jasonm253...I appreciate it
nice rom thanks @Shawn5162
Tried Flashing - did clean flash - NO EXT SD Card - any suggestions? I have flashed other CM 12 roms and didn't have an issue with SD Card - is there something else I need to do ? Or should I reflash?
sprdagod88 said:
putting in my request for klteSPR !!!!! THERE IS NO LOVE HERE IN THE GS5 FORUM FOR KLTE SPR . I am still in the beginning fase of learning how to compile and cook my own rom my experience on this gs5 forum has made me have to pick up the learning curve cause there is like no fun out there for klte spr i sit back and look through the forum and admire with great jealousy looking at all the great roms for a phone that i have in my hand but cant touch them was using bliss but now they have moved to 5.0 and are not suporting kltspr, the same with fusion and liquid was using them also now they are not supporting either
one more time ,,,,,,PLEASE SUPPORT KLTESPR ,i have seen post on other forums asking the same there is a very big segment of kltespr users that you would most likely make faithful followers ,they just need somewhere to go
THANKZ IN ADVANCE!!!!
SPRDAGOD8
(THE HOOD HACK.)
Click to expand...
Click to collapse
I second this post.
Firstly I want to thanks the dev for the rom and hope will bring and fix to reach the stability and all the nexus goods. .. :good:
Boring........CDMA PLZZZ..,... PARTICULARLY usc no one ever shows us some love man.
@Shawn5162 do i need to be on a particular/latest bootloader? will an older one do?
shohag2018 said:
@Shawn5162 do i need to be on a particular/latest bootloader? will an older one do?
Click to expand...
Click to collapse
U should be on kk Bootloader
Sent from my XT1064 using XDA Free mobile app
Shawn5162 said:
U should be on kk Bootloader
Sent from my XT1064 using XDA Free mobile app
Click to expand...
Click to collapse
ok thanks
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
Mod edit:
Download links removed for lack of GPL compliance.
Useful Links
Unofficial changelog
klimtwifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
In particular I would like to thank:
@crpalmer for his work porting cm12 to the picassowifi. It was of great help getting cm12 on the sm t700
@nvertigo67 && @UpInTheAir for their kernel magic and misc fixes
XDA:DevDB Information
CyanogenMod 12.0 for klimtwifi (Tab S 8.4)
Contributors
@eousphoros
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Testing
Created 2015-03-13
Last Updated 2015-03-13
Awesome stuff! Excited to give it a try.
Edit: Super smooth and very pleasant to use. Thank you!
After all this time...
Been away for a while. Heard about the news and thought I'd stop by to congratulate you for the official release. I've been reviewing the threads and am frankly stunned at your attitude and work ethic. Thank you very much and I'll be sure to post if anything isn't up to snuff.
I am so glad to see this. Another great device saved from the buggy laggy touchwiz. Have been using the bliss cm12 with mine. I will flash this asap
Congrats on the official release! Is there anything we need to flash in order to get vibration for the capacitive keys working?
You just made my day. Rooted, flashed and looks great!
(finally no more touch wizz)
Congrats on your official release. I've been using CM12 unofficial since the first day I bought the Tab S. Runs buttery smooth ever since (it's been about a month or two). Still runs silky smooth, no lag and even better no touchwizz Just did a clean install to the new update.
Two thumbs up!
Same here, I think my tablet spent 30 minutes on stock before running your CM12. The official is even smoother, so really thanks a lot
My tablet gets stupidly slow and choppy randomly on this official release
Sent from my SM-T700 using XDA Free mobile app
---------- Post added at 03:52 AM ---------- Previous post was at 02:55 AM ----------
Nvm figured it out. It was the auto display where it changes your screen temperature at night. It made my tablet laggy for some reason
Sent from my SM-T700 using XDA Free mobile app
Is anyone having trouble getting their tablet to go jump deep sleep mode?
I only have faux clock, bbs, es file Explorer, sleep timer and mx player installed. Exact same setup as the unofficial build a few weeks back
Clean install of the first official nightly. Faux clock underclocking to 900mhz and only having 2 cores running
Bbs tells me that it won't go into deep sleep mode with the screen off. It's sitting at the 250mhz frequency the whole time
Looking into kernel wake locks and I see its the PowerManagerService.Wakelocks that is keeping it up
Like I said, it's the same setup as last time. Tomorrow I'll test and see if faux clock is what is keeping it up but I can't see why it would
If there's certain logs that you would like me to collect during certain times. Please let me know
Enddo said:
Is anyone having trouble getting their tablet to go jump deep sleep mode?
I only have faux clock, bbs, es file Explorer, sleep timer and mx player installed. Exact same setup as the unofficial build a few weeks back
Clean install of the first official nightly. Faux clock underclocking to 900mhz and only having 2 cores running
Bbs tells me that it won't go into deep sleep mode with the screen off. It's sitting at the 250mhz frequency the whole time
Looking into kernel wake locks and I see its the PowerManagerService.Wakelocks that is keeping it up
Like I said, it's the same setup as last time. Tomorrow I'll test and see if faux clock is what is keeping it up but I can't see why it would
If there's certain logs that you would like me to collect during certain times. Please let me know
Click to expand...
Click to collapse
If partial wakelocks shows play.services it might be this.
BTW: why do you use faux clock? What advantages does this app has over Settings->Performance for underclocking?
nvertigo67 said:
If partial wakelocks shows play.services it might be this.
BTW: why do you use faux clock? What advantages does this app has over Settings->Performance for underclocking?
Click to expand...
Click to collapse
Partial Wakelocks shows "SystemUpdateService" keeping my device awake for 9 of the 11 hours yesterday/last night. With some text under it that says "Google Services". Does this tell us what it is? All of my apps are updated. The Gapps package I'm using is called "gapps-lp-20141109-signed.zip". I don't remember exactly where I got it(maybe linked from the CM website back in November). It's the Gapps package I've always used.
I have tried a regular reboot. I could try a factory reset if you think that would do the trick, or do you think doing a clean wipe(again) with a new/different Gapps package is best? I'm about to investigate this SystemUpdateService thing and see if I can pull something up from Google searches
Edit - Oh, and I just use Faux Clock since it's what I've been using for a while now. On devices with a custom kernel it gives me a lot more options to tweak the kernel/performance and since CM12 hasn't always had a working Performance section(after you enable Developer Options), I've just continued using it on the tablet.
So far I have found this - http://forum.cyanogenmod.org/topic/...ce-wakelock-on-cm11-m7-massive-battery-drain/
Enddo said:
Partial Wakelocks shows "SystemUpdateService" keeping my device awake for 9 of the 11 hours yesterday/last night. With some text under it that says "Google Services". Does this tell us what it is? All of my apps are updated. The Gapps package I'm using is called "gapps-lp-20141109-signed.zip". I don't remember exactly where I got it(maybe linked from the CM website back in November). It's the Gapps package I've always used.
I have tried a regular reboot. I could try a factory reset if you think that would do the trick, or do you think doing a clean wipe(again) with a new/different Gapps package is best? I'm about to investigate this SystemUpdateService thing and see if I can pull something up from Google searches
Edit - Oh, and I just use Faux Clock since it's what I've been using for a while now. On devices with a custom kernel it gives me a lot more options to tweak the kernel/performance and since CM12 hasn't always had a working Performance section(after you enable Developer Options), I've just continued using it on the tablet.
So far I have found this - http://forum.cyanogenmod.org/topic/...ce-wakelock-on-cm11-m7-massive-battery-drain/
Click to expand...
Click to collapse
Sorry, run out of Thanx...
What you found is a bit older and 'bout cm11. This is something new or a regression to the old problem. I hoped to solve this by downgrading to an older bersion of gapps...
Would you please go to Settings->Apps->All->google play services and check what version it is? Thanx in advance.
What about hardware support? FP Sensor, Cam, Hdr, etc.? Is everything there?
nvertigo67 said:
Sorry, run out of Thanx...
What you found is a bit older and 'bout cm11. This is something new or a regression to the old problem. I hoped to solve this by downgrading to an older bersion of gapps...
Would you please go to Settings->Apps->All->google play services and check what version it is? Thanx in advance.
Click to expand...
Click to collapse
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Connected to bluetooth successfully but the sound very choppy. Is this a common problem?
Otherwise wery stable ROM.
Sent from my SM-T700 using XDA Free mobile app
Enddo said:
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Click to expand...
Click to collapse
AFter researching and testing I posted this.
Enddo said:
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Click to expand...
Click to collapse
I tried and it does work. Look for all update services in disable service and check them off. Sleeping well now.
twped said:
Connected to bluetooth successfully but the sound very choppy. Is this a common problem?
Otherwise wery stable ROM.
Sent from my SM-T700 using XDA Free mobile app
Click to expand...
Click to collapse
Screen off was fine for me but as soon as its on the music was choppy. Tried different governors to no effect.
Anyone else having issues auto updating the nightlies?
When it boots me into recovery, it fails to install the downloaded update and I have to then go back into recovery and install in manually.
interfreak said:
Anyone else having issues auto updating the nightlies?
When it boots me into recovery, it fails to install the downloaded update and I have to then go back into recovery and install in manually.
Click to expand...
Click to collapse
Do you have the TWRP recovery installed?
The auto updating feature just creates a script that is loaded in TWRP and then tries to boot up into TWRP to run the script(aka dirty flash the nightly it just downloaded).
If you have CWM(like we've been using since before the official nightlies) as the recovery, then you can't auto update