CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads:
CM server
Installation:
Unlock the bootloader
Flash a recovery
Reboot into recovery
Flash rom.
Reporting bugs:
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Report bugs on Jira at jira.cyanogenmod.org
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your:
Phone model:
CM Download url:
Gapps version:
Radio (baseband):
CM version:
Did you:
Install xposed framework?
Restore apps in titanium backup?
Flash another kernel?
Are you using a supported recovery?
start Art Runtime?
search the thread for similar issues before posting?
I don't reply to tech support by pm or emails/hangouts messages.
If you have xposed installed, please bother to post.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Offiical cm for peregrine, ROM for the Moto G
Contributors
Somcom3X, @BlueFlame4
Source Code: http://www.github.com/CyanogenMod
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader with recovery
Version Information
Status: Beta
Created 2014-11-24
Last Updated 2015-04-20
Reserved
I present to you CyanogenMod 12 for the peregrine. After delaying my initial release to an almost fully working state, it is here now.
Video review:
Big thanks to @Cm9aphla
Bugs:
Wifi tether (Experimenting)
Bluetooth stack issues with multitasking. Somewhat buggy
GPS issues as well.
Reserved
Big thank you to all of the donators:
Please confirm your username by posting the remainder of the transaction ID. To donate, please send to [email protected] via paypal
Donators
Code:
S. Fabbro 4HR94540AN4xxxxxx
D. Noonburg 604068013C4xxxxxx
G. Girotto 9SH91349CF4xxxxxx
Gracias!
New recovery is in the works, stay tuned.
If anyone needs some assistance, join #cyanogenmod or #carbonrom on irc.
I'll be in #carbonrom-dev most of the time.
If no one responds instantly, simply wait. Don't be this guy (You know who you are):
Code:
[22:57:18] --> carbon_guest ([email protected]/web/freenode/ip.97.xx.3.xx) has joined #teamcarbon
[22:58:19] <carbon_guest> I'm having an issue, this is my first time trying the carbon ROM the installation
was succesful but every time i try to install the GAPPS it gives me an error and says (Satus 6), any aid please?
[23:01:02] <carbon_guest> anybody here?
[23:10:06] <carbon_guest> hellooooooooooooooooooooooooooooooooooooooooo
[23:26:12] <-- carbon_guest ([email protected]/web/freenode/ip.97.xx.3.xx) has quit (Quit: Page closed)
Great work! I'll stay here until official 5.0 ota arrives. [emoji16]
Which superuser flashable zip should I use? The ones I used in KK don't work.
---------- Post added at 10:33 PM ---------- Previous post was at 10:33 PM ----------
And the ROM is rock solid, congrats!
Awesomeness, grabbing it now and will run it through the paces.
@Somcom3X
great work man =D
Bugs that I saw:
Wifi Tether (mentioned on op)
CPU Clock on 1190 almost all the time when the screen is on
@Somcom3X Excellent release! Though I've encountered a few issues apart from the mentioned ones.
AOSP keyboard gesture swiping does not work
Power Off does not work
Notification sound does not work. Tried changing it a few times but none of which works. It vibrates though.
Notification LED doesn't work? I don't think it's working or how it's intended to work in 5.0 Lollipop, but Pulse Notification light is turned on (This seems to work for alarms though)
Random Settings force closes
Maps is not working -- I know it's totally unrelated but it could be GPS related as it just kept showing "Waiting for location..."
Some apps are left even after clearing all apps. ie: SuperSU requests, Contacts, app installs.
Volume rocker for Media Volume gets stuck at a certain point, though it's only a visual bug.
Crossed out stuff just suddenly worked. lol
Is it possible to get Busybox working on CM12 too? Can't find one that would install.
Using this as a daily driver until I find something that wouldn't let me.
zackwire said:
Which superuser flashable zip should I use? The ones I used in KK don't work.
---------- Post added at 10:33 PM ---------- Previous post was at 10:33 PM ----------
And the ROM is rock solid, congrats!
Click to expand...
Click to collapse
I used this and it seems to be working fine. http://download.chainfire.eu/589/SuperSU/
I'm testing since you release the zip in the other thread (I was even about to suggest a new thread ).
I did a dirty flash from cm11, so, maybe some of my reports here are specific about doing dirty flash (just in case, remember to redo your lockscreen security, because the dirty flash made your lockscreen accept anything as password. Remaking the lockscreen security fix it).
* Stock camera doesn't work (shows image, but doesn't take photos, even after cleanup the application). Downloading the google camera or whatever other camera works (and it seems the camera bug from cm11 is gone).
* f2fs doesn't work, ext4 works but useless (you can't do anything, but the cm12 reads that there's a partition and with size, etc), exfat doesn't work either. The worse is: using any of the filesystems I said made you unable to even reformat de sdcard. Only fat works for me. Btw, I'm unable to copy from pc to sdcard.
Thanks
Downloading now. Thanks for posting, been waiting for a lollipop rom.
Edit:
Gps is working fine for me, camera works when it wants to, replaced the stock camera with a port from the apps section of this forum.. Google camera seems a bit more stable. Installed no frills cpu control and disabled safety valve and other apps being able to set frequency and I noticed while it still says min is 1.1 if you look at stats it will go to 300 like normal.
Guest Mode is enabled ?
settings crash sometimes, but it's working well
thanks for your great work
Hi. I'm so excited to install this, but I want to know if I'll be able to go back to KK if there is any problem
Thanks for all your hard work!
Great work man
Just out of curiosity, the thread name is "[ROM] unOfficial Cyanogenmod 12 4.4.4 for the Moto G 4G (Peregrine)".
CM12 is made after 5.0, not 4.4.4 - right?
Or am I misunderstanding what the 4.4.4 means?
Thanks!
athlantar said:
Just out of curiosity, the thread name is "[ROM] unOfficial Cyanogenmod 12 4.4.4 for the Moto G 4G (Peregrine)".
CM12 is made after 5.0, not 4.4.4 - right?
Or am I misunderstanding what the 4.4.4 means?
Thanks!
Click to expand...
Click to collapse
This is CM12 5.0
Probably just a typo by SomCom3X.
Can confirm lack of GPS signal lock. Could be the same bug with CM11.2 where you need to get it just right with a previous signal lock on stock and then flash. Otherwise, running extremely smoothly. Latest SuperSU Beta 2.27 gives root without any big problems, restoring TiBu as we speak. Also can confirm lack of swipe in stock keyboard. SD Card access is working. Great work!
Getting a GPS lock before you flash cm12 worked for me. That should be step one from now on before flashing any ROM. Just in case ya know. So far everything's running great.
Level99 said:
Can confirm lack of GPS signal lock. Could be the same bug with CM11.2 where you need to get it just right with a previous signal lock on stock and then flash. Otherwise, running extremely smoothly. Latest SuperSU Beta 2.27 gives root without any big problems, restoring TiBu as we speak. Also can confirm lack of swipe in stock keyboard. SD Card access is working. Great work!
Click to expand...
Click to collapse
I've read it's an issue with quite a bit of Motorola devices. The stock GPS trick is the best thing possible to do at the moment.
zackwire said:
Which superuser flashable zip should I use? The ones I used in KK don't work.
Click to expand...
Click to collapse
here you go mate
edit:
whoops someone posted it already ^^
mhh, better more links than no links
gr3ud said:
here you go mate
edit:
whoops someone posted it already ^^
mhh, better more links than no links
Click to expand...
Click to collapse
Okay, when already posting links, there is latest beta v 2.27
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 2.3 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
First time flashing CyanogenMod 7 to the HTC Tattoo, or coming from another ROM?
Root the device and install ClockworkMod Recovery. Instructions are available here.
Perform a NANDroid backup of your current ROM.
Format the system, data & cache partitions of your device.
Perform a factory reset.
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Upgrading from earlier version of CyanogenMod 7?
Perform a NANDroid backup of your current ROM.
Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Download Links:
Official post
CyanogenMod:
Latest version: update-cm-7.1.0.1-click
Download: link
Mirror: link
MD5sum: 4ec7cdcdd5ef19c6884a55dd917b39fa
Google Apps addon:
Version: gapps-gb-20110828
Mirror: link
Mirror: link
Version: Google Talk with video addon
Mirror: link
Mirror: link
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
hey cyanogen, why this post, eh? our maintainer kalim already updated his post about the new update.
i wonder too, allthough i like that this post is more clearly structured
potattoo said:
i like that this post is more clearly structured
Click to expand...
Click to collapse
I like this post too, but i noticed that you didn't link to nightly rom so they'll not updated anymore?
Anyway thanks alot for all the hard work of CyanogenMod crew...
Hanisa said:
I like this post too, but i noticed that you didn't link to nightly rom so they'll not updated anymore?
Anyway thanks alot for all the hard work of CyanogenMod crew...
Click to expand...
Click to collapse
Nightlies are here:
http://download.cyanogenmod.com/?device=click
finnk said:
Nightlies are here:
http://download.cyanogenmod.com/?device=click
Click to expand...
Click to collapse
I know, but maybe if they didn't put it on the main post, there aren't new update, this is my point of view that's why i ask it...
This is now the official CM thread
Kalim is closing his thread. All discussions will be here from now onwards, it seems.
100%working camera now
i notice batt take long time to charge and drain
thanks kalim
I have a question.
Are latest nightly's deodex or odex?
bladez said:
I have a question.
Are latest nightly's deodex or odex?
Click to expand...
Click to collapse
They are de-odexed.
For anybody who want to take a look to Nightly CHANGELOG here's the link : http://cm-nightlies.appspot.com/?device=click
Accidental touching the volume key while picking up calls always hangup the call. Is there any setting to avoid this??
I have 7.1.0.1 and made a clean install and am very happy with that rom! Really, really good work!
I want to report one curiosity:
I put my contacts from LG KP500 Cookie over Bluetooth to my Tattoo and everything worked fine - with one exception: The telefon-numbers have the wrong format.
In Germany telefon-numbers look like: *0(2-4 numbers)*-*(3-8 numbers)*, e.g. 02234-7654322.
Mobile-numbers always look like: *0(3-4 numbers)*-*(7-8 numbers)*, e.g. 0159-7654322.
But the Tattoo made every contact-number I saved myself on the Cookie this format: 012-345-67891, except the pre-set service-numbers. This is quite unusual. On the Cookie my contact-numers have the format: 01234567891, which is acceptable . There was even no possibility to put a "-" into a number.
Don't know where the mistake is... Maybe there is a solution?
Download Server Problem!
I can not download nothing from server:
http://download.cyanogenmod.com/?type=nightly&device=click
It says only: Internal server error
What is happend?
EDIT: Server is now OK
BilboPC said:
I can not download nothing from server:
http://download.cyanogenmod.com/?type=nightly&device=click
It says only: Internal server error
What is happend?
Click to expand...
Click to collapse
work ok for me
I've been trying to download this for a couple of days now, both through this page and through ROM Manager. No luck. Server issues?
i shortly did set 'keep launcher in memory', 'remove unused images' (translated from german) and 'use 16bit for transparency' in cyanogen settings, to tweak it a bit. since then i got only reboots and freezes, shortly after booting.
did those freezes/reboots before occasionaly, but now it got insane!
version 7.0.1.1 and nb221
i made a logcat after a freeze, its full of errors. ill send it on request!
managed to disable that stuff during reboots (seems like it was possible since the PIN requester didnt pop up) now it was working longer. But on first display timeout it froze again. something is seriously bugged with the latest versions.
EDIT: still reboots and freezes... only thing that seem to have stopped it again was to remove sdcard. so i guess .android_secure is faulty again. But this must have happened during use, not from flashing the ROM, since after flashing it was fine. It only happened after yesterday.
And no, i didnt touch CPU settings. Just moved some more apps to sdcard and changed the above settings (which i reverted as i wrote).
So my conclusion: there is a bug that breaks the .android_secure !
Next NB ChangeLog is MASSIVE
http://cm-nightlies.appspot.com/?device=click
Hi
I have a small problem with the message app. If i set "Use send timestamp" (i don't know if it's called like this, but it's the feature that allows you to see the time the message was sent instead of the time you received it) the messages have no "GMT offset" (i mean the times are shown in GMT time and not in my time - which is GMT+1 or +2 if there is "legal time").
If i enable the feature "GMT Timestamp", which i think is made to solve this problem, nothing changes.
I'm using NB199; do you think it is fixed now?
Regards
Since the old thread got closed and nobody answered my problem, here I go again.
Ever since I clean-installed 220 nightly (wiped everything, /system, dalvik-cache, cache, factory reset, SD) my phone after starting up totally freezes in 5 minutes or so. Rebooting it 2-3 times usually helps until the next reboot when I AGAIN have to reboot it 2-3 times before it's stable again. I tried updating to 226, but this changed NOTHING.
Please help as this is a serious problem.
Here is the logcat when it has crashed: http://pastebin.com/AT5U5nag
DO NOT post in this thread until you have read the first three posts and last two pages of this thread in their entirety!
"Me Too" posts for known issues with no useful debugging information WILL BE REPORTED.
What is Omni?
Omni Gerrit Review
OmniLog - changelog
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
ROM:
Omni for Samsung Galaxy S 4
Gapps:
http://forum.xda-developers.com/showthread.php?t=2397942
(recommend the MODULAR FULL package, however, keep in mind that the STOCK package is intended for Nexus devices)
UPDATE FROM VARIANT OMNI BUILD TO UNIFIED BUILD
Backup your apps and other pertinent data and DO A FULL WIPE.
Don't complain about it. Just do it. If you try to post bug reports or complaints and you have not conducted a wipe of:
/system
/data
/cache
/dalvik
I will completely and utterly ignore you, as well as report your post for not reading the clearly posted rules at the top of this post.
UPDATE FROM OMNI VIA OPEN DELTA UPDATER
Settings -> System Updates -> Check for update
You will NOT need to wipe anything with the delta updates unless it is explicitly stated or you start having strange issues.
Omni only supports TWRP recovery, use any alternate recovery at your own risk.
Kernel Source: https://github.com/omnirom/android_kernel_samsung_jf
XDA:DevDB Information
Omni for Galaxy S4, ROM for the Samsung Galaxy S 4
Contributors
jakew02, xplodwild
Source Code: http://www.github.com/omnirom/
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Nightly
Created 2014-05-28
Last Updated 2015-04-20
Important Information
This is NOT the place to ask questions like:
When will <feature> be included?
Is <feature> included yet?
Can you bring <feature> to Omni?
ETAs of any nature
Follow the rules. This is a new thread and it WILL remain clean and ON TOPIC. I will immediately report any off-topic posts, trolling, flaming, etc. of any sort. This is a DEVELOPMENT thread, and as such, has been posted in the DEVELOPMENT section.
INCLUDE LOGS when reported a bug. Even if you think that you might be the only one with the bug, POST LOGS, that will help narrow down the issue about 100 million times!
Explore the ROM a bit before posting here things like " WHERE IS <feature> CAN YOU ADD FEATURE etc. etc.
You have to understand, that gets extremely annoying after 50 posts like that. Most features can be seen on the blog or in the MERGED section of gerrit.
Root IS NOT included with Omni by default, so you will need to flash SuperSU in recovery SuperSU
How to build Omni from sources:
OmniROM - Setting Up A Compile Environment
Bug Reports and Feature Requests
jira.omnirom.org
Important Information Part 2
Omni XDA Discussion ( NOT DEVICE RELATED DISCUSSION ONLY)
http://forum.xda-developers.com/omni
IRC
Web Client
irc.freenode.net
#omni
First
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
rabiny said:
Hello,
I know one can flash the 9505 rom on the i337m becuse the bootloader is not locked, but what about the AT&T version (i337), can i flash this (jflte) version on my i337 ?
Click to expand...
Click to collapse
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
buzzwyzr said:
Using 052814 unified build with 052414 full modular gapps...ROM boots but gets stuck at the "setup wizard". After you select your language and press the white triangle it reads " Welcome...please wait a few minutes" for a minute or so...the the screen goes black except for the status bar and the backlights on the hardware keys stay on.
I clean flashed twice then downloaded the ROM and gapps for a 2nd time then clean flashed those twice...all with the same results as described above.
Hope this helps.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
I just flashed the 05/28 nightly (on my jfltespr) with the 4-16 Minimal PA Gapps with absolutely no errors. This most definitely sounds like a Gapps problem to me, since the SetupWizard is not packaged or built with the ROM, but instead flashed with Gapps. This is why if you were to NOT flash a Gapps package, you don't have to run through it.
jakew02 said:
Yes. If you notice, I closed the individual variant threads and put a direct link to this thread. Basically, you can see a list of supported variants by checking this:
https://github.com/omnirom/android_device_samsung_jflte/blob/android-4.4/BoardConfig.mk#L129
That is the list of device asserts that the updater-script will accept.
Click to expand...
Click to collapse
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
rabiny said:
Thank you for the quick reply,
What about the locked bootloader, Are there any points I should pay attention to ?
Or i can just download the recent file (from http://dl.omnirom.org/jflte/) and flash it over my current version (jflteatt)
Click to expand...
Click to collapse
If you are already running Omni then you're fine. Just follow the instructions from the OP.
These instructions are written under the assumption that you know how to root and install a custom recovery.
Sent from my X9006 using Tapatalk
Is custom hot word launcher built in yet?
ahoslc said:
Is custom hot word launcher built in yet?
Click to expand...
Click to collapse
Yes. I've been using it and it works perfectly fine.
You can see that from gerrit as well as the XDA News Portal...
I'm squashing questions like this now. Please re-read Post 2 as I have updated it.
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
bala_gamer said:
flashed the 30th nightly, thought of asking about two things,
1. why does the initial setup page needs a working data connection?
2. i lost root after a clean install, am i missing something?
Click to expand...
Click to collapse
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
djbootleg said:
the root apk has to be flashed via recovery as stated on the first page post.
---------- Post added at 08:40 PM ---------- Previous post was at 08:27 PM ----------
Hello Jakew02
I moved over to your latest rom yesterday the 5/29 nightly and i came across a couple issues.
i have been using cm mod since the days of android cupcake and decided to try this out.
1st issue is when im trying to lower the phone ringer volume, it always goes to lower the sounds/music volume. it is pretty annoying because i have to make all the sliders come out and manually slide the phone ringer volume. even after switching between apps and what not it insists on lowering the music volume.
2nd issue is i cannot get the multi window to work or how to enable it. i have downloaded and installed these apps :halo)),multiwindowsidebar, toggle multiwindow, xhalo floating, xmultiwindow, and xposed installer. also the fixvisibilityofmultiplenonulls. Any help on getting it to work will be appreciated. i am very new to this feature since ive never had it in CM since i thought u couldnt get it, only on Stock Samsung roms.
lastly, is there any way to add shortcuts to the unlock slider like in cm?
thanks
Click to expand...
Click to collapse
These aren't issues or bugs at all; you just haven't looked around the settings.
all of your questions can be answered by just looking through the settings.
OP updated, please re-read it.
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Shaftamle said:
Download page says 193 Mb, the download is 183 mb. I downloaded twice, both 183. Anyone else? The newest nightly.
Sent from a Shaftamle Galaxy S4
"Thanks Button" is always appreciated!
http://mycolorscreen.com/Shaftamle/
Click to expand...
Click to collapse
It's 183mb, I've just flashed. Working fine.
ZordanKV said:
It's 183mb, I've just flashed. Working fine.
Click to expand...
Click to collapse
Have you tried flashing a custom kernel with the latest nightlys?
bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
Nope, already switched to the other ROM. Omni is good, but doesn't suit my needs
bobbarker2 said:
Have you tried flashing a custom kernel with the latest nightlys?
Click to expand...
Click to collapse
gpu drivers fixed
jakew02 said:
i have stated multiple times that kernel developers will need to begin released "omni-based" kernels.
I WILL NOT alter this ROM to accommodate custom kernels. the kernels need to change to be compatible with the ROM.
Custom kernels will not just magically start working. Kernel developers need to remove the flo adreno drivers and related commits from their kernels. If they don't know which commits those are, they can simply cherry-pick this commit: https://github.com/omnirom/android_kernel_samsung_jf/commit/068449af3996f1072c80dcc4a09a88af43abd7f7
contained in that commit is all of the reverts needed to make a cyanogenmod-based kernel work with Omni.
I have spoken with @Entropy512 about this a few times and we both agreed that we will NOT be altering the ROM in order to this one device to be able to use flo adreno stuff. That's just stupid and causes more work and problems for everyone else.
So the bottom line on this is, if you want a custom kernel, ask your kernel devs to cherry-pick the above commit and release Omni kernels separately from CM-based one.
If anyone has a problem with this, well, gerrit is free to use and open to all.
As before I will use this comparison to better justify my decision:
You wouldn't buy a Playstation controller(an accessory) to use with your Xbox(a primary), once you get home and realize it doesn't work because it's designed for something other than what you have, you call Microsoft and demand that they make the Xbox(primary) work with Playstation controllers(accessory)?
Absolutely Not. If ANYTHING, you would call Sony and demand that they make their controllers(accessory) work with the xbox system.
Hope this clarifies that issue a little better for everyone.
Also on another note:
I have narrowed down the camera preview freeze down to one repository
Click to expand...
Click to collapse
Jake the only reason I asked was because I did a bit of testing for you where the testbuild had support for custom kernels and you said that it should be fixed and you would push the change when you could. I even followed up with you at a later time and you said you hadn't had time/inclination to do it yet. I'm not demanding anything of you and I didn't want to bug you with the issue so I asked someone else who was in similar territory. Had I known about your changed stance on the issue, I wouldn't have brought it up.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads:
CM server
Installation:
Unlock the bootloader
Flash a recovery
Reboot into recovery
Flash rom.
Reporting bugs:
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Report bugs on Jira at jira.cyanogenmod.org
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your:
Phone model:
CM Download url:
Gapps version:
Radio (baseband):
CM version:
Did you:
Install xposed framework?
Restore apps in titanium backup?
Flash another kernel?
Are you using a supported recovery?
start Art Runtime?
search the thread for similar issues before posting?
I don't reply to tech support by pm or emails/hangouts messages.
If you have xposed installed, please bother to post.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Offiical cm for peregrine, ROM for the Moto G
Contributors
Somcom3X, ShabbyPenguin
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader with recovery
Version Information
Status: Nightly
Created 2014-08-28
Last Updated 2014-10-30
Reserved
I'm your maintainer.
Current bugs:
Low ram bug (Essentially after 24hours an unknown process will take up a good amount of your ram and eat it until you factory reset/flash clean.)
Moto g will not connect to certain router securities.
Gps (device only) requires a signal lock from stock to function correctly.
Reserved
Credits to:
@shabbypenguin - can't say how much this guy deserves.
intervigil- Helping me get CM support
dhacker- The original framework of the moto's
Thank you!!! Can you say if this rom will work well with my xt1040, the south american version of the the moto g 4g?
camargomaia said:
Thank you!!! Can you say if this rom will work well with my xt1040, the south american version of the the moto g 4g?
Click to expand...
Click to collapse
Only one way to find out.
Sent from my XT1045
Awesome!!! Thank you very much, and all people to contributing and helping developing CMW for this device!
Awesome! In this ROM work all GPS modes (in any custom rom don't work for me), the Wifi works fine. This ROM is very smooth and faster, good work!
Only have 1 bug, the low ram...
I have 39 model with only xposed and gravitybox.
Somcom3X said:
I'm your maintainer.
Current bugs:
Low ram bug
Gps (device only) requires a lock from stock to function correctly.
Click to expand...
Click to collapse
Mind expanding on these two? What is the low ram bug? And how do you get a lock from stock for the gps fix?
Sorry for noobishness
Dual Sim support ?
major9 said:
Dual Sim support ?
Click to expand...
Click to collapse
Dual Sim??? On what model?
Sent from my XT1045
camargomaia said:
Thank you!!! Can you say if this rom will work well with my xt1040, the south american version of the the moto g 4g?
Click to expand...
Click to collapse
Hi! New Moto G 4G owner here. I can confirm this ROM works very well with my XT1040.
Great job from all the people behind this. I'll give it a day and see how it works.
jac0708 said:
Mind expanding on these two? What is the low ram bug? And how do you get a lock from stock for the gps fix?
Sorry for noobishness
Click to expand...
Click to collapse
Ram basically gets eaten up by an "unknown" process and the only way to fix is to reinstall the ROM.
You need to have GPS running on stock before you reboot to recovery.
Sent from my XT1045
Sorry, didn't see this was 4G section.
Somcom3X said:
Dual Sim??? On what model?
Sent from my XT1045
Click to expand...
Click to collapse
Hello!
Thank you for this great work. :good:
I am glad to see, that there is cm11 also for my moto g 4g ...
The following problems occured at my installation (xt1039) and I hope you can give me a hint...
WLAN:
The already known WLAN-bug prevents a WLAN connection.
Is there a workaround or do you have more information in which security context the problem appears?
EXT. SD-CARD:
The SD-Card (Sandisk, 32 Gb, Class 10) is not available in cm11.
Using the stock rom, the sd card was available and usable.
Do you have an idea how to fix this?
Thank you and best regards,
1graser
OK, tried the first nightly. I'm still having problems with horrible wifi when connected to my cable router (VirginMedia SuperHub). I get a craptastic connection that works for a bit then drops out. Here's a logcat filtered on 'wifi'.
It seems to give multiple lines of "W/XTWiFiOS(1809): No entry in secure settings for enhanced location services: false" then lose my SSID and disconnect. I think maybe it's fine for a few minutes then it's trying to use my WLAN for location pinpointing and failing.
What is your--
Phone model: xt1039
CM Download url: http://download.cyanogenmod.org/get/jenkins/81401/cm-11-20140827-NIGHTLY-peregrine.zip
Gapps version:BaNkS's standard 4.4.4 GApps from here
Radio (baseband):MSM8926P_101.90.49.01R
CM version: 11
Did you:
Install xposed framework? no
Restore apps in titanium backup? no
Flash another kernel? no
Are you using a supported recovery? yes
start Art Runtime? no
search the thread for similar issues before posting? yes, it's a known issue.
camargomaia said:
Thank you!!! Can you say if this rom will work well with my xt1040, the south american version of the the moto g 4g?
Click to expand...
Click to collapse
Yes, it works...
---------- Post added at 08:35 AM ---------- Previous post was at 08:31 AM ----------
major9 said:
Dual Sim support ?
Click to expand...
Click to collapse
Moto G 4G is only single SIM. There's no dual sim version...
Bug report: device won't respond to Bluetooth player commands (next or previous or play/pause music) when browsing the internet with Chrome and listening to music at the same time on Bluetooth...
Tested with Poweramp and Apolo... Sometimes Poweramp even closes when playing music in backgroung (no FC error, just stops playing music).
With stock browser it works normally...
It worked fine with unofficial build from 08/05...
My device is the XT1040...
1graser said:
EXT. SD-CARD:
The SD-Card (Sandisk, 32 Gb, Class 10) is not available in cm11.
Using the stock rom, the sd card was available and usable.
Do you have an idea how to fix this?
Click to expand...
Click to collapse
I changed the SD-Card and I am now using a Samsung, 32 Gb, Class 10.
This works without problems...
Now the SD-Card is also available in the CWM-Recovery.
Seems to be the strange behaviour that some cards do not work together with custom roms and recovery...
1graser said:
I changed the SD-Card and I am now using a Samsung, 32 Gb, Class 10.
This works without problems...
Now the SD-Card is also available in the CWM-Recovery.
Seems to be the strange behaviour that some cards do not work together with custom roms and recovery...
Click to expand...
Click to collapse
I use a genuine SanDisk 32GB class 10 card here... It works on all ROMs and recoveries with external SD support...
Have the same on unofficial Build from 08/05.
Sometimes various apps were closed without FC message when using them, happens mostly to Chrome, Poweramp, sometimes Youtube.
On Chrome very often it tries to open the keyboard (Switftkey) when tapping the search bar but then Chrome got closed and I'm landing in an emtpy Homecreen (which also seemed to be closed) an then the icons came back one by one.
Maybe this has to do with low memory? Or misconfigured apps..I don't know how to track this down.
In Youtube the volume Buttons don't work, and the app closes itself very often when rotating the phone to go into full-screen mode.
Need to double test this with a clean install.
Q&A for [Rom] [5.0] [UNOFFICIAL] Cyanogenmod 12 for Moto X
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Rom] [5.0] [UNOFFICIAL] Cyanogenmod 12 for Moto X. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
BMc08GT said:
This is for all variants!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What does not work?
DocumentsUI/Downloads
DRM content playback
You tell me
Downloads
ROM can be downloaded from here
Installation
Make a backup first!
Boot into recovery
Wipe data/cache
Install zip (Google Apps optional)
Select the CM12 zip
Reboot
XDA: DevDB Information
CM 12 Moto X, ROM for the Motorola Moto X
Contributors
bmc08gt
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Click to expand...
Click to collapse
So this is a bit more improved AND has working data compared to the other unofficial 5.0 build posted today in a different thread by @skiwong20 correct?
Never mind, flashed it and answered my own question. Amazing work!
Good enough to be Daily driver. Thank you so much!!!!
Downloading now!
I'll gave feedback after I flash it
Thanks!!!
ROM tool box error anyone?
Sent from my Moto X using XDA Free mobile app
gunnerv said:
ROM tool box error anyone?
Sent from my Moto X using XDA Free mobile app
Click to expand...
Click to collapse
I'd assume it's because the app isn't compatible with 5.0 yet but I can't say for sure, I don't use it.
A lot of apps will need to be updated to 5.0
Multiple Users
Multiple users appears borked innyhis build too. Amy idea whats wrong?
Microphone on WhatsApp does't work :'(
Working fine on AT&T Moto X. Weird issue though.....
If I put my girlfriend as a contact with her phone number it will force close Contacts.
Examples
Girlfriend as a contact, no #: Works
Girlfriend as contact, random #: Works
Girlfriend as contact, my own #: Works
Girlfriend as contact, with her area code, then 444-4444: Works
Girlfriend as contact with her area code and phone number: Force Close.
What sort of specific hell of a bug is this D:
---------- Post added at 03:09 PM ---------- Previous post was at 02:28 PM ----------
Looking into it, it's specifically my girlfriends phone # causes the Contacts app to crash. Wat.
EDIT:
I noticed if you send an SMS to a contact and view that person in the Contacts app, it WILL force close. =/
Possible fix
Mateus Marquezini said:
Microphone on WhatsApp does't work :'(
Click to expand...
Click to collapse
Hey, try this fix. It's the WhatsApp fix from a Carbon rom port. It should work even though it was made for 4.4.4 KitKat, but test it. **Make a backup of your current OS before flashing** Good luck dude :good:, hope I tried to help.
Softcard Installation?
By any chance, does anyone know how to get Softcard working on this ROM?
flamex91 said:
Hey, try this fix. It's the WhatsApp fix from a Carbon rom port. It should work even though it was made for 4.4.4 KitKat, but test it. **Make a backup of your current OS before flashing** Good luck dude :good:, hope I tried to help.
Click to expand...
Click to collapse
Thank you. Works perfectly
Help with cm zip to update
To update the 20141117 version in 20141118 do i have to wipe my data and cache? or only a dirty fash?
Fix the Heads Up Notifications ,didn't work Only appears when someone call
System.ui has stopped
I've had this problem many times before, all with cyangenmod on my Moto X (2013 Version).
I got CM 12 to install, but then this error comes up.
After I lock and unlock my phone I get the looped error "system.ui has stopped".
I was hoping this was a CM 11 issue, but it seems CM 12 is doing the same thing. I'm wondering if there's something I'm not doing on my phone that is kicking off this error every time I install CM.
The only rom I've seen that hasn't done this on my Moto X is the Gummy ROM. Any ideas on how to fix this?
I fix the whatsapp audio with the zip but now the speakers doesn't work
This is awesome! Great job!
Running smooth on my droid maxx with unlocked bootloader. Root works with superuser flash and titanium worked perfect. Battery seems ok so far.
...
For the record: I dont personally believe that my lack of posts should exclude me from the development discussion. I fixed LTE on the Electrify M, and made several commits for the Hero S(including fixing audio issues which seem similar to what is going on with this ROM. I have not browsed the code yet, so I cant say though) There are others who clearly should have been posting in Q&A but haven't. In any case I just came to say that for the US Cellular model I was required to disable data(via Airplane Mode) and turn on "Data Roaming" to avoid getting constant soft-reboots as soon as the network connected. I also changed preferred network mode to LTE, though It seems to default back to "Global" so I dont believe that was an issue. After "Data Roaming" is enabled you may turn Airplane Mode off and it operates with no soft-reboots. I've yet to see this issue mentioned; however, it was with both nightlies and the other ROM found here on the forum so I don't imagine that it will only pertain to my device. I'll look into the speakerphone/earpiece issue tomorrow if it has not been resolved in the next build.
Thanks,
815turbo aka ekylypse
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing CyanogenMod 12.0 on your device, or coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Known Issues
* None
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates me more than lazy people who do not search for an answer before asking.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread. "I'm having problems rooting/unlocking" is NOT relevant here.
LOGS LOGS LOGS!!!! Use this: SysLog by Tortel
Experience issues?
* Nightlies: bug reports are not accepted. You are relying on yourself and your peers in this thread for support!
* M-series: file a bug in Jira.
Download Links
Mod edit:
Download links removed for lack of GPL compliance.
Useful Links
Unofficial changelog
klimtwifi wiki
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
In particular I would like to thank:
@crpalmer for his work porting cm12 to the picassowifi. It was of great help getting cm12 on the sm t700
@nvertigo67 && @UpInTheAir for their kernel magic and misc fixes
XDA:DevDB Information
CyanogenMod 12.0 for klimtwifi (Tab S 8.4)
Contributors
@eousphoros
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Testing
Created 2015-03-13
Last Updated 2015-03-13
Awesome stuff! Excited to give it a try.
Edit: Super smooth and very pleasant to use. Thank you!
After all this time...
Been away for a while. Heard about the news and thought I'd stop by to congratulate you for the official release. I've been reviewing the threads and am frankly stunned at your attitude and work ethic. Thank you very much and I'll be sure to post if anything isn't up to snuff.
I am so glad to see this. Another great device saved from the buggy laggy touchwiz. Have been using the bliss cm12 with mine. I will flash this asap
Congrats on the official release! Is there anything we need to flash in order to get vibration for the capacitive keys working?
You just made my day. Rooted, flashed and looks great!
(finally no more touch wizz)
Congrats on your official release. I've been using CM12 unofficial since the first day I bought the Tab S. Runs buttery smooth ever since (it's been about a month or two). Still runs silky smooth, no lag and even better no touchwizz Just did a clean install to the new update.
Two thumbs up!
Same here, I think my tablet spent 30 minutes on stock before running your CM12. The official is even smoother, so really thanks a lot
My tablet gets stupidly slow and choppy randomly on this official release
Sent from my SM-T700 using XDA Free mobile app
---------- Post added at 03:52 AM ---------- Previous post was at 02:55 AM ----------
Nvm figured it out. It was the auto display where it changes your screen temperature at night. It made my tablet laggy for some reason
Sent from my SM-T700 using XDA Free mobile app
Is anyone having trouble getting their tablet to go jump deep sleep mode?
I only have faux clock, bbs, es file Explorer, sleep timer and mx player installed. Exact same setup as the unofficial build a few weeks back
Clean install of the first official nightly. Faux clock underclocking to 900mhz and only having 2 cores running
Bbs tells me that it won't go into deep sleep mode with the screen off. It's sitting at the 250mhz frequency the whole time
Looking into kernel wake locks and I see its the PowerManagerService.Wakelocks that is keeping it up
Like I said, it's the same setup as last time. Tomorrow I'll test and see if faux clock is what is keeping it up but I can't see why it would
If there's certain logs that you would like me to collect during certain times. Please let me know
Enddo said:
Is anyone having trouble getting their tablet to go jump deep sleep mode?
I only have faux clock, bbs, es file Explorer, sleep timer and mx player installed. Exact same setup as the unofficial build a few weeks back
Clean install of the first official nightly. Faux clock underclocking to 900mhz and only having 2 cores running
Bbs tells me that it won't go into deep sleep mode with the screen off. It's sitting at the 250mhz frequency the whole time
Looking into kernel wake locks and I see its the PowerManagerService.Wakelocks that is keeping it up
Like I said, it's the same setup as last time. Tomorrow I'll test and see if faux clock is what is keeping it up but I can't see why it would
If there's certain logs that you would like me to collect during certain times. Please let me know
Click to expand...
Click to collapse
If partial wakelocks shows play.services it might be this.
BTW: why do you use faux clock? What advantages does this app has over Settings->Performance for underclocking?
nvertigo67 said:
If partial wakelocks shows play.services it might be this.
BTW: why do you use faux clock? What advantages does this app has over Settings->Performance for underclocking?
Click to expand...
Click to collapse
Partial Wakelocks shows "SystemUpdateService" keeping my device awake for 9 of the 11 hours yesterday/last night. With some text under it that says "Google Services". Does this tell us what it is? All of my apps are updated. The Gapps package I'm using is called "gapps-lp-20141109-signed.zip". I don't remember exactly where I got it(maybe linked from the CM website back in November). It's the Gapps package I've always used.
I have tried a regular reboot. I could try a factory reset if you think that would do the trick, or do you think doing a clean wipe(again) with a new/different Gapps package is best? I'm about to investigate this SystemUpdateService thing and see if I can pull something up from Google searches
Edit - Oh, and I just use Faux Clock since it's what I've been using for a while now. On devices with a custom kernel it gives me a lot more options to tweak the kernel/performance and since CM12 hasn't always had a working Performance section(after you enable Developer Options), I've just continued using it on the tablet.
So far I have found this - http://forum.cyanogenmod.org/topic/...ce-wakelock-on-cm11-m7-massive-battery-drain/
Enddo said:
Partial Wakelocks shows "SystemUpdateService" keeping my device awake for 9 of the 11 hours yesterday/last night. With some text under it that says "Google Services". Does this tell us what it is? All of my apps are updated. The Gapps package I'm using is called "gapps-lp-20141109-signed.zip". I don't remember exactly where I got it(maybe linked from the CM website back in November). It's the Gapps package I've always used.
I have tried a regular reboot. I could try a factory reset if you think that would do the trick, or do you think doing a clean wipe(again) with a new/different Gapps package is best? I'm about to investigate this SystemUpdateService thing and see if I can pull something up from Google searches
Edit - Oh, and I just use Faux Clock since it's what I've been using for a while now. On devices with a custom kernel it gives me a lot more options to tweak the kernel/performance and since CM12 hasn't always had a working Performance section(after you enable Developer Options), I've just continued using it on the tablet.
So far I have found this - http://forum.cyanogenmod.org/topic/...ce-wakelock-on-cm11-m7-massive-battery-drain/
Click to expand...
Click to collapse
Sorry, run out of Thanx...
What you found is a bit older and 'bout cm11. This is something new or a regression to the old problem. I hoped to solve this by downgrading to an older bersion of gapps...
Would you please go to Settings->Apps->All->google play services and check what version it is? Thanx in advance.
What about hardware support? FP Sensor, Cam, Hdr, etc.? Is everything there?
nvertigo67 said:
Sorry, run out of Thanx...
What you found is a bit older and 'bout cm11. This is something new or a regression to the old problem. I hoped to solve this by downgrading to an older bersion of gapps...
Would you please go to Settings->Apps->All->google play services and check what version it is? Thanx in advance.
Click to expand...
Click to collapse
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Connected to bluetooth successfully but the sound very choppy. Is this a common problem?
Otherwise wery stable ROM.
Sent from my SM-T700 using XDA Free mobile app
Enddo said:
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Click to expand...
Click to collapse
AFter researching and testing I posted this.
Enddo said:
My current version of Google Play Services is at 7.0.96
And right, that is an older issue, but there were some tips about using a Disable Service app to enable something that CM was disabling. I haven't had a chance to try it yet, but I'm hoping it will help out when I get a chance later today
Click to expand...
Click to collapse
I tried and it does work. Look for all update services in disable service and check them off. Sleeping well now.
twped said:
Connected to bluetooth successfully but the sound very choppy. Is this a common problem?
Otherwise wery stable ROM.
Sent from my SM-T700 using XDA Free mobile app
Click to expand...
Click to collapse
Screen off was fine for me but as soon as its on the music was choppy. Tried different governors to no effect.
Anyone else having issues auto updating the nightlies?
When it boots me into recovery, it fails to install the downloaded update and I have to then go back into recovery and install in manually.
interfreak said:
Anyone else having issues auto updating the nightlies?
When it boots me into recovery, it fails to install the downloaded update and I have to then go back into recovery and install in manually.
Click to expand...
Click to collapse
Do you have the TWRP recovery installed?
The auto updating feature just creates a script that is loaded in TWRP and then tries to boot up into TWRP to run the script(aka dirty flash the nightly it just downloaded).
If you have CWM(like we've been using since before the official nightlies) as the recovery, then you can't auto update