Related
Hi guys,
Everyone is aware of Android N and recent release of Cm 14.0 for our beloved Android One (Sprout) Devices .
So today I am presenting you how to install Xposed in MM and how to have Android N status bar that will give a slightest feel of N on your MM device. So that you can enjoy Android N till Cm 14.0 reaches to a stable release.
Click to expand...
Click to collapse
So what you need :
1) Android One Device (This can work on other devices too)
2) Any MM ROM (Can work on Lollipop too but Xposed install method is Different)
2) Twrp 3.0+ (Recommended)
3) Xposed Framework
4) Xposed Installer.apk
5) Android N-ify.apk (Xposed Module)
Note: Skip to part 2 (in steps) if you already have installed Xposed on your device.
Downloads in 2nd post.
Steps :-
Part 1 Installing Xposed on MM
1) First of all download Xposed Framework zip given below.
2) Boot to twrp and then flash the downloaded framework
3) Now Reboot :-> System
4) Dowload Xposed installer apk given below. And install the apk.
5) Now Verify that Xposed is installed properly by opening the installed apk. Go to Framework and see it its written on top in green that "Xposed framework version 86 is active". [Screenshot 7]
Part -2 Giving N Looks
6) If Xposed is installed properly then download the last Android N-ify apk.
7) Install it and activate this module in Xposed. [Screenshot 9]
8) Open Android N-ify and then reboot the phone (soft Reboot worked fine too)
9) Check your status bar. You can customize more by opening Android N-ify apk. [Screenshot 11]
Part 3 Additional Steps
10) In addition to this You can install Android N Style cm custom theme http://goo.gl/55vvBg [Screenshot 10] and have N navbar + few more settings [Screenshot 6] close to Android N.
11) Hip Hip Hurray to have a little feeling of Android N on your mm device. Check your system settings menu too. Press the last About Phone - Anroid Version few clicks. You will see Android N logo. [Screenshot 4]
I hope you would not miss Android N sometime for now. And I hope Google give us N update soon. Till then enjoy this on any mm rom which will give you stability of mm and looks of N. I hope you enjoy this and hit thanks if you liked the tutorial.
Downloads
Links Updated on 8th Sep 16.
Please note that this Xposed version (provided by me below) is for arm devices only (Sprout Devices). For arm64 and x86 processors this Xposed version is not supported. You can download mm Xposed Framework according to your device processor from :-
http://dl-xda.xposed.info/framework/sdk23/
Also Android N-ify is updated constantly so if you don't find latest apk here, go to:
https://ci.paphonb.xyz/jenkins/job/AndroidN-ify/
.
.
.
On the top of everything you can use Leaked Google Pixel Launcher to have more of the nougat feeling. Screenshots are provided of the launcher. If you liked it here is the downloading link:
http://goo.gl/XXTYRQ
Or I have attached the Launcher zip too. Just Look below screenshots
Just flash the launcher zip through recovery
.
.
Latest version of N-ify can be found on Jenkins.
joeyhuab said:
Latest version of N-ify can be found on Jenkins.
Click to expand...
Click to collapse
thanks and apk updated
will this work on Sprout 4 running on MM 6.0.1 (Dirty Unicorn ROM).
May I try this?
Rizan Mohammed said:
will this work on Sprout 4 running on MM 6.0.1 (Dirty Unicorn ROM).
May I try this?
Click to expand...
Click to collapse
Absolutely. It will work. Just follow the procedure correctly.
rajputmiles said:
On the top of everything you can use Leaked Google Pixel Launcher to have more of the nougat feeling. Screenshots are provided of the launcher. If you liked it here is the downloading link:
http://goo.gl/XXTYRQ
Just flash the launcher zip through recovery
.
.
Click to expand...
Click to collapse
I installed everything got working , but need a home screen as like in above screen shoot. Should I need to use any specific launcher ?
Rizan Mohammed said:
I installed everything got working , but need a home screen as like in above screen shoot. Should I need to use any specific launcher ?
Click to expand...
Click to collapse
Yeah this one is Leaked launcher from New Google Pixel phones I guess. Launcher name is Launcher3. And link is also given above screenshots. So just download it and then flash it too. Or I have attached launcher zip also below launcher screenhots. So just grab it.
Preface
I wanted to create this thread to replace the old, aging thread by @shrazy (https://forum.xda-developers.com/xposed/unofficial-list-modules-nougat-xposed-t3639615) and because some people wanted that, I decided to do that (But, this thread uses the old one as a template)
Please report here your tested modules, which work (or not) with official Xposed for Nougat (by @rovo89).
Links to official Xposed Nougat threads
Classic (system) version (by @rovo89): https://forum.xda-developers.com/showthread.php?t=3034811
Systemless (Magisk) version (by @topjohnwu) (v88.0+ only): https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Here's some important stuff for one to read:
DISCLAIMER 1
You're not allowed to make reports here with Xposed Nougat releases not based on official rovo89's code (I mean the ones by PurifyOS team, abforce, topjohnwu (before v88.0) etc.).
DISCLAIMER 2
Don't report any modules, which you haven't tested yourself, as this can cause problems for other users.
DISCLAIMER 3
Please use the search function before asking, "Does (module) work?". If a module is not listed in this entire thread, please make a backup, try out the module and report back the detailed results.
DISCLAIMER 4
Xposed is in relatively early stages for Nougat, bugs are to be expected (sometimes) and will be there for sure.
Make a backup, even if this entire thread says that all of your modules are reported as working!
Note 1
I will try to keep this list updated as frequently as possible and I apologize if I miss your module(s).
Note 2
Please tell me (with a PM on XDA) about any improvements that I can make to this thread's OP
And finally, here's the module list:
Working
Legend: ???? - needs detailed results
- All My... (????)
- Always Correct
- Amplify (????)
- AppOpsXposed (????)
- App Settings (v1.15+, ????)
- Awesome Pop-up Video (????)
- Battery Shutdown Manager (????)
- BootManager (????)
- Cool Tool
- Download Redirection
- Exi for Swiftkey
- Flat Style Bar Indicators
- GravityBox [N]
- Greenify (beta, ????)
- MiniMinGuard (beta, ????)
- NSFW Gboard
- No Device Check
- One Tap Video Download (????)
- PerfectColorBar
- Play Store Changelog
- Power Nap (????)
- Statusbar Download Progress
- SoundCloud Downloader
- XCallRecordingSettings
- XInsta
- XInternalSD (????)
- Xposed edge
- YouTube AdAway
- YouTube Background Playback
- Youtube swipe to seek
- You tell me
Partially working
Legend: ???? - needs detailed results
- AdBlocker Reborn (????)
- Flat Style Colored Bars (with permissive SELinux, ????)
- InstallerOpt (https://forum.xda-developers.com/xp...modules-official-xposed-t3696881/post74406027)
- Lock screen clock mods (????)
- Lock screen widgets (????)
- Prevent Running (????)
- You tell me
Not working
Legend: ???? - needs detailed results
- You tell me
Greenify works
Statusbar download progress works.
Xinsta works.(FYI I'm not using the latest Instagram.)
tejasrao1996 said:
Greenify works
Statusbar download progress works.
Xinsta works.(FYI I'm not using the latest Instagram.)
Click to expand...
Click to collapse
Your modules have been added to the list
Sent from my Samsung Galaxy Trend Plus using XDA Labs
Sound Cloud Downloader, Youtube Ad Away, Awsome Popup Video and YouTube Swipe to seek are also working for me.
Moto G3 | LineageOS 14.1 | Xposed Framework 88.1 | Xposed apk 3.1.2
Amplify
BootManager
Greenify
Play Store Changelog
Prevent Running
Statusbar Download Progress
Gravity Box for nougat works (as evidenced by its name)
Sachin ET said:
Sound Cloud Downloader, Youtube Ad Away, Awsome Popup Video and YouTube Swipe to seek are also working for me.
Moto G3 | LineageOS 14.1 | Xposed Framework 88.1 | Xposed apk 3.1.2
Click to expand...
Click to collapse
kamilmirza said:
Amplify
BootManager
Greenify
Play Store Changelog
Prevent Running
Statusbar Download Progress
Click to expand...
Click to collapse
Nergal di Cuthah said:
Gravity Box for nougat works (as evidenced by its name)
Click to expand...
Click to collapse
All of your modules have been added to the list
Sent from my Samsung Galaxy Trend Plus using XDA Labs
Regarding Greenify, I recall the Play Store version (3.6.2) not working so well but the one from apkmirror (3.7.x) being fine.
If that's still the case, might have to mention that.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
marcdw said:
Regarding Greenify, I recall the Play Store version (3.6.2) not working so well but the one from apkmirror (3.7.x) being fine.
If that's still the case, might have to mention that.
LG G3 D851, PAC-MAN LP ROM, MultiROM, Tapatalk 4.9.5
Click to expand...
Click to collapse
OK
Sent from my Samsung Galaxy Trend Plus using XDA Labs
Even if YouTube AdAway works with Xposed for Nougat, does it work with YouTube v12.42.59?
Sent from my Xiaomi Redmi Note 4 using XDA Labs
r.Ry4N.05 said:
Even if YouTube AdAway works with Xposed for Nougat, does it work with YouTube v12.42.59?
Click to expand...
Click to collapse
No, you must use the version of youtube listed in the ytadaway changelog currently 12.32.60
r.Ry4N.05 said:
Even if YouTube AdAway works with Xposed for Nougat, does it work with YouTube v12.42.59?
Click to expand...
Click to collapse
It works with version 12.41.55 (Updated 25th)! Have yet to receive your listed version.
If you can source it, 'Youtube Background Playback v2.0.4' is also working on nougat!
Also working for me are: -
XinternalSD 4.8
Xposed One Tap Video Download 5.4 (found on the playstore - youtube module not working on latest tube.)
MinMinGuard 2.0 beta5
Using LOS 14.1 on RN3 and Nexus 9 with Xposed 88.1, waiting till i update rom to use 88.2.
It would be interesting to know what modules also work on MIUI, reports of xposed installed and active but no modules working.
corkiejp said:
It works with version 12.41.55 (Updated 25th)! Have yet to receive your listed version.
If you can source it, 'Youtube Background Playback v2.0.4' is also working on nougat!
Also working for me are: -
XinternalSD 4.8
Xposed One Tap Video Download 5.4 (found on the playstore - youtube module not working on latest tube.)
MinMinGuard 2.0 beta5
Using LOS 14.1 on RN3 and Nexus 9 with Xposed 88.1, waiting till i update rom to use 88.2.
It would be interesting to know what modules also work on MIUI, reports of xposed installed and active but no modules working.
Click to expand...
Click to collapse
Your modules have been added to the list
Sent from my Samsung Galaxy Trend Plus using XDA Labs
Another thread : [UPDATED] List of modules which work with Nougat Xposed SDK25/SDK24
https://forum.xda-developers.com/xposed/modules/updated-list-modules-nougat-xposed-t3696927
chester.anjan said:
Another thread : [UPDATED] List of modules which work with Nougat Xposed SDK25/SDK24
https://forum.xda-developers.com/xposed/modules/updated-list-modules-nougat-xposed-t3696927
Click to expand...
Click to collapse
I know
Sent from my Samsung Galaxy Trend Plus using XDA Labs
Subscribed! Thanks for starting this much needed updated thread @DodoGTA
Here's a list of modules working for me on RR 7.1.2 Xposed 88.2 ARM (each of these worked perfectly on Xposed 88.1 as well) on my MotoG4+:
1. Appops Xposed v1.29 Beta
2. Powernap Alpha v0.8.1 (downloaded from play store)
3. Adblocker Reborn v1.8.1
4. Allmy... v0.7.4
5. Always Correct v1.0.5
6. Amplify (Donate) v4.0.1
7. AppSettings v1.15
8. Download Redirection v1.3.0.2
9. Exi for Swiftkey v1.2.0
10. NSFW Gboard v1.1
11. Starusbar Download Progress v3.4
12. Xposed Edge v4.2.3
13. Greenify (Donate) v3.8
Not sure about:
1. BubbleUPnP Pro (Audiocast) v2.8.13p1 : Doesn't show any errors either in setting up the xposed Audiocast feature or xposed log but can't get audio only to cast over Chromecast.
ALSO: Can't mirror screen over Chromecast with Xposed - not sure if it's just me. Could someone please confirm?
Frances91 said:
Not sure about:
1. BubbleUPnP Pro (Audiocast) v2.8.13p1 : Doesn't show any errors either in setting up the xposed Audiocast feature or xposed log but can't get audio only to cast over Chromecast.
ALSO: Can't mirror screen over Chromecast with Xposed - not sure if it's just me. Could someone please confirm?
Click to expand...
Click to collapse
Have BubbleUPnP, but don't use the audiocast feature. My music mainly kept on sdcard in phone (use bluetooth mainly).
Casting screen is working fine, except for displaying firefox beta (screen get's truncated on device)! [LOS 14.1 - xp 88.1]
Sorry for off-topic discussion!
Frances91 said:
...
Here's a list of modules working for me on RR 7.1.2 Xposed 88.2 ARM (each of these worked perfectly on Xposed 88.1 as well) on my MotoG4+:
1. Appops Xposed v1.29 Beta
2. Powernap Alpha v0.8.1 (downloaded from play store)
3. Adblocker Reborn v1.8.1
4. Allmy... v0.7.4
5. Always Correct v1.0.5
6. Amplify (Donate) v4.0.1
7. AppSettings v1.15
8. Download Redirection v1.3.0.2
9. Exi for Swiftkey v1.2.0
10. NSFW Gboard v1.1
11. Starusbar Download Progress v3.4
12. Xposed Edge v4.2.3
13. Greenify (Donate) v3.8
Not sure about:
1. BubbleUPnP Pro (Audiocast) v2.8.13p1 : Doesn't show any errors either in setting up the xposed Audiocast feature or xposed log but can't get audio only to cast over Chromecast.
ALSO: Can't mirror screen over Chromecast with Xposed - not sure if it's just me. Could someone please confirm?
Click to expand...
Click to collapse
Most of your modules have been added to the list
Sent from my Samsung Galaxy Trend Plus using XDA Labs
Cool tool and Flat Style Bar working fine.
OP5 OOS 4.5.13.
Zosk said:
Cool tool and Flat Style Bar working fine.
OP5 OOS 4.5.13.
Click to expand...
Click to collapse
All of your modules have been added to the list
Sent from my Samsung Galaxy Trend Plus using XDA Labs
Mention the modules that you have tried and are working also mention extra details like your
device
rom
Android version
Systemless xposed or normal
And other detail that you think might be helpful
Cheers
Working modules list:
WA tweaks
Greenify latest beta
Screen off animation
GRAVITYBOX (OREO)
Twitch adfree
-Xinsta (partially)
Instant face unlock
-SnapTools
Lolistat reborn
-All My...
-Flat Style Colored Bars
-Flat Style Keyboard
-MaxLock
-NSFW Gboard
-Play Store Changelog
-Soundcloud Downloader
-X Messenger
-screenshot delay remover
-wifi password
-rootcloak
-minminguard (fcs in some apps)
-SwipeBack2
-XposedGmsCoreUnifiedNlp
- FakeGapp (tested on 8.0)
-Chrome Pie
-Youtube swipe
--LocationReportEnabler
-Kmod
-amplify
- audio balance
- YouTube background playback
- YouTube swipe to seek
- Twitter ad-free
-NoOverlayWarning
-PerfectColorBar
-Clean Lockscreen
-Lock screen clock mods
-No Lock Home
-WhatsApp extensions
-xpirvacy( set selinux to permissive)
-XPrivacyLua
- No Device Check
-Buttered toast
-Neo Power Menu
-greenify(partially)
-SecureAccessibility
-• Exi for Swiftkey
Instant Face Unlock
• True Silent Mode
• X Screen Stabilizer
Power Nap
Prevent Running
AllRotationsEnable
CameraNotify
ChromePie
Copy Toast
CPUTemp
Disable Fullscreen Keyboard
Fake Wifi
Instant Screen-off
MaxLock
Native Clipboard
Text Aide
youtube adway
ifont
Statusbar download Progress
Serajr Xperia Home X (O) - v1.0.0
Not Working:
BootManager
: Smooth System Progress Bars
app setting
Here's my current list on the 6P running 8.1
I did have to toggle Xposed off and back on initially to get the status to activate.
-All My...
-Flat Style Colored Bars
-Flat Style Keyboard
-MaxLock
-NSFW Gboard
-Play Store Changelog
-Soundcloud Downloader
-X Messenger
-XInsta(haven't tested this one yet)
Sent from my Nexus 6P using Tapatalk
Almost forgot about MaxLock. Haven't been able to run Xposed since 6.0 and that is one that I used heavily.
waiting for gravity box oreo
May I know if there is any module which can assign a different timezone to an app?
i.e. My phone is +8 as I live in Hong Kong. However, a Japanese game checks the time and works only if it is +9.
Now I set my phone to +9. But I want to use my system as +8, but "override" the app as +9.
I confirm these are working (see attachment)
edit: I forgot to say rom is stock on pixel 8.1 with xposed installed systemlessly via magisk 15.2
I'll update the op with those modules that are confirmed by atleast two people
Sent from my Google Pixel 2 XL using XDA Labs
the application xposed installer does it work properly ??? because when I go to download whatever closes
Στάλθηκε από το Nexus 6P μου χρησιμοποιώντας Tapatalk
matrixios01 said:
the application xposed installer does it work properly ??? because when I go to download whatever closes
Click to expand...
Click to collapse
Yes, it's still kinda buggy, but it works if you download the modules apk from internet and install them as apps, then enable and reboot
RootCloak confirmed working, tested by me (3.0-beta_20160731_2), see screenshot by TENN3R a few posts up:
More info: https://forum.xda-developers.com/xposed/modules/mod-rootcloak-completely-hide-root-t2574647 or http://repo.xposed.info/module/com.devadvance.rootcloak2
Tested on:
Device: Shamu (Google Nexus 6)
ROM: nephilim_rom_shamu-8.1.0-20180108-OPM3-v1.2-R3Ds.zip
Root: Magisk 15.2
Xposed: Normal i guess
How i installed Xposed:
First flashed 8.1 zip from this link: https://www.xda-developers.com/xposed-framework-for-android-oreo-beta/
Then installed the Xposed installer 3.14, didn't work, then installed through the installer (normal, not recovery) and it worked.
TENN3R said:
I confirm these are working (see attachment)
edit: I forgot to say rom is stock on pixel 8.1 with xposed installed systemlessly via magisk 15.2
Click to expand...
Click to collapse
Also SwipeBack2 works fine
XposedGmsCoreUnifiedNlp on 8.1 and FakeGapps on 8.0 working well.
Xinsta working for me Validus ROM 8.1.0
I have updated the op with modules that have been mentioned 2 times +
Cheers ?
Sent from my Google Pixel 2 XL using XDA Labs
Redmi Note 4. Rom Aex 5.1(8.1)
Magisk Systemless Xposed
Modules Working-
1. Chrome Pie
2. Youtube swipe
3. Flatstyle Keyboard
4. Greenify- GCM not working
---------- Post added at 11:25 PM ---------- Previous post was at 11:22 PM ----------
TENN3R said:
I confirm these are working (see attachment)
edit: I forgot to say rom is stock on pixel 8.1 with xposed installed systemlessly via magisk 15.2
Click to expand...
Click to collapse
adaway not working on my device
shamu 8.1 Oreo
Working:
-All My
-Flat Style bar
-Flat Style Keyboard
-LocationReportEnabler
Kmod working alrite
Kmod working alrite
---------- Post added at 08:03 PM ---------- Previous post was at 08:03 PM ----------
Prattham said:
Mention the modules that you have tried and are working also mention extra details like your
device
rom
Android version
Systemless xposed or normal
And other detail that you think might be helpful
Cheers ?
Working modules list
Xinsta
SnapTools
Play store changelog
Minminguard
Nsfw gboard
Flat style both modules
All my
Click to expand...
Click to collapse
Kmod working alrite
Xiaomi redmi note 4
Aex 5.1 02/01/18 (Android 8.1)
Xposed official framework , xposed material installer because the official app crash when I go into download section
- amplify
- audio balance
- YouTube background playback
- YouTube swipe to seek
- Xinsta
- Twitter ad-free
- Play store changelog
YouTube adaway make my YouTube crash... Latest version,
Working:
Lockscreen Clock Mods [L-M] (Partially Working)
MinMinGuard
NoOverlayWarning
PerfectColorBar
Playstore Changelog
XInsta
Not Working:
BootManager
Statusbar download Progress
Android OS: Stock Android 8.1
Device: Nexus 5X
Root: Magisk 15.2
Xposed Version: Systemless Magisk Xposed Module (SDK27)
Welcome to Formula Performante...
Hey there fellow Tab S2 user! So... your wondering what this ROM is huh? This ROM is the fruit of my labour, after many many hours of work, research etc. This ROM is genuinely the lightest stock based ROM, in all of the Tab S2 ROM era. The ROM weighs just 675 MB, its RAM usage only 1.0-1.1 GB and its fluidity and speed is unmatched, since any and all modifications have been directed towards only enhancing performance and battery life. So, what does this ROM pack? Here's a list:
Features:
1. Extraordinarily Light Operating System with a very deep debloat
2. Google Apps Removed while still maintaining SafetyNet
3. Latest @engine95 Kernel with Enforcing and far more superior RAM Management
4. Updated SoundAlive with slightly modified Volume Increases
5. Every App has been replaced by the lightest equivalent (For e.g, for the Music App, I checked RAM management of Google Play Music and Eleven Music (Cyangogenmod) and found that Eleven Music used 50 MB of RAM lesser than GPM, so I used that. This should give you an idea of how much research and time it took to find the lightest variant of most stock apps)
6. S8 Camera UI with FHD 60FPS,Tracking AF and Standard Improved Autofocus. Other than these improvements, the camera app was debloated as well, and any useless modes were terminated and rooted out.
7. Completely De-knoxed
8. Magisk Pre-Installed
9. Most Extra RAM and Battery Consuming features have been terminated
10. Device Maintenance switched out for Files GO and SystemUI Tuner (To view battery stats, pull down quick settings (notification panel), click on the top right corner (three dots),button order and place the battery icon and storage icon into the quick settings panel.
11. Mtweaks 13.0 Installed for better kernel control, including GPU control.
12. AOSP Sounds instead of Sammy Sounds.
13. Few build prop tweaks for minor performance gains.
Bugs:
Music will crash on first boot
Do not update Magisk, its 17.1 and has to stay that way to work! New versions of Magisk aren't compatible with out current kernel and will just kill boot!
INSTALL INSTRUCTIONS
1. Wipe DATA,SYSTEM,DALVIK CACHE and CACHE
2. Flash The ROM
3. Realize you enjoy the ROM and hit Thanks :good:
-- NOTE: This ROM is heavily debloated. It's weight alone should classify how much has been removed. Please check comments before installing to see if theres any problems.
Download Link: https://drive.google.com/open?id=1XedlWrDuaQGD48ercE-dWLWcFdCq41Cf
Kernel Source: https://github.com/engine95/Exynos-5433-S2-2DRG2
Screenshots will be uploaded later:
Thanks. Just installed it.
First impressions:
Starting with "Music has stopped". Oops.
Upgrading Magisk Manager results in error, because Magisk version lower than v18.0 not supported. You should mention this. So no updated version of Magisk possible here (from 17.1 to 18.1)? Oops
its fast, really fast. Wow
more to follow, will just reinstall everything to get Magisk to work.
...
ThaiDai said:
Thanks. Just installed it.
First impressions:
Starting with "Music has stopped". Oops.
Upgrading Magisk Manager results in error, because Magisk version lower than v18.0 not supported. You should mention this. So no updated version of Magisk possible here (from 17.1 to 18.1)? Oops
its fast, really fast. Wow
more to follow, will just reinstall everything to get Magisk to work.
...
Click to expand...
Click to collapse
Oh yeah, thanks for reminder. OP updated
You should explain why it isn't possible to update to the newest version of Magisk. It isn't so nice installing a new ROM with an old version of root and no chance to fix this.
Update:
Removed the ROM. Titanium Backup crashes immediately. So unusable for me.
ThaiDai said:
You should explain why it isn't possible to update to the newest version of Magisk. It isn't so nice installing a new ROM with an old version of root and no chance to fix this.
Update:
Removed the ROM. Titanium Backup crashes immediately. So unusable for me.
Click to expand...
Click to collapse
He explained why...upgraded versions of magisk are not compatible with the custom kernel he used inside the rom. Possibly if the kernel gets some updates we'll get magisk updated support too.
Btw idk why Titanium crashes...will test tonight if happens with me too. Dumb tought: maybe it uses some gapp related services to work and then it crashes because thei're missing? That sound stupid i know...
For the Dev:
It's possible to install gapps (bare minimum as play store and play services) or MicroGapps in this rom? Just in case i wont rely on Fdroid or other thirdy part stores. Thank you
Giuskiller said:
He explained why...upgraded versions of magisk are not compatible with the custom kernel he used inside the rom. Possibly if the kernel gets some updates we'll get magisk updated support too.
Btw idk why Titanium crashes...will test tonight if happens with me too. Dumb tought: maybe it uses some gapp related services to work and then it crashes because thei're missing? That sound stupid i know...
For the Dev:
It's possible to install gapps (bare minimum as play store and play services) or MicroGapps in this rom? Just in case i wont rely on Fdroid or other thirdy part stores. Thank you
Click to expand...
Click to collapse
Ok so Titanium backup, is related with the kernel being enforcing. Titanium require permissive which I didn't release due to the many security holes it usually poses. Oh and about Gapps, don't flash.
Updated Magisk 17.3 and up, (18.0, 18.1) compatible kernel is here https://forum.xda-developers.com/showpost.php?p=79164496&postcount=42
Enjoy
Can't enable any Accessibility Services telling that the text to speech language is not supported and when i tries to force itself to change it to english it restarts.
Thanks
core issue imo is that the calling app dialer does not show up during a call-no call ui (call received but no way to accept it) if there was a way to go back to stock dialer and messages this ROM would have been perfect. too bad all in the past now.
For me, after some finetuning, this is the best, fastest and most stable and compatible custom ROM ever for the SM-T715. Thank you Skulldron!
My finetuning after flashing the ROM (TWRP is clearly a requirement):
1) flash new Kernel v1.4
2) flash Magisk v.21.4 (the last one before Magisk (with v.22.0) became an "App", bundeled with the Magisk Manager )
3) install MagiskManager-v8.0.7.apk (The last separate Version of the Magisk Manager before it became a bundle with Magisk)
4) install newest Open Gapps for Arm 7.0 ("Micro" bundle in my case, because I need Exchange support that seems only to come with GMail) choose the one for your needs if you need: open gapps 7.0 arm
5) install Magisk Module "Google Dialer Framework" via Magisk Manager
6) install Google Phone (The offical Google dialer app shows a "device not supported" message but works fine with the Performante Rom. If you don´t like the error message, try another dialer app)
7) install Google contacts (The offical Google contacts app that works fine with the Performante Rom)
That´s the good and stable working basis installation for me. I do not need any google account and use sources like F-Droid, uptodown or the A**zon appstore for some charged applications i need (like Business Calendar, Mobile Doc Scanner...)
Based on you description I reinstalled this one because all other custom roms result in reboots, looping etc.
- Installed stock Gapps (Micro wasn't even available for 7.0)
- the newest kernel 1.6.1
- can use phone and contacts without warnings and problems
- upgraded to lastest magisk version, get warning about system app etc (seems a known problem right now, so I'll wait). But root works
- Netflix, Prime working, Disney with error 39
- fast!
-------------------------
Very good until now. Have to wait a few days and see if the reboots/boot loops etc are gone.
-------------------------
I'll use it only inhouse (since yesterday we have a Galaxy Tab S7+ as primary tablet, but: I can't use it because my daughert occupies it constantly!). Maybe this old and slim rom will give the S2 a new life.
@photona: Thanks for your post. Without it I never would have tried this one again. Sadly Skulldron was last online some months ago...
@engine95: Thanks for updating the kernel!
ThaiDai said:
Based on you description I reinstalled this one because all other custom roms result in reboots, looping etc.
- Installed stock Gapps (Micro wasn't even available for 7.0)
- the newest kernel 1.6.1
- can use phone and contacts without warnings and problems
- upgraded to lastest magisk version, get warning about system app etc (seems a known problem right now, so I'll wait). But root works
- Netflix, Prime working, Disney with error 39
- fast!
-------------------------
Very good until now. Have to wait a few days and see if the reboots/boot loops etc are gone.
-------------------------
I'll use it only inhouse (since yesterday we have a Galaxy Tab S7+ as primary tablet, but: I can't use it because my daughert occupies it constantly!). Maybe this old and slim rom will give the S2 a new life.
@photona: Thanks for your post. Without it I never would have tried this one again. Sadly Skulldron was last online some months ago...
@engine95: Thanks for updating the kernel!
Click to expand...
Click to collapse
Thank you for the tips, after installing opengapps, system webview will be missing, so I have to push a webview (v70.0.3538.80) into /system/app and install it again in the system. Didn't you encounter this issue?
laolang_cool said:
Thank you for the tips, after installing opengapps, system webview will be missing, so I have to push a webview (v70.0.3538.80) into /system/app and install it again in the system. Didn't you encounter this issue?
Click to expand...
Click to collapse
I don't use webview, so: no.
cant believe i haven't tried this before. made this ancient tablet very useable. I wish they still made tablets this size, this thin and light with such good screens. its perfect if you want to read the news or surf social media, want something bigger than your phone but not a monster tablet like most these days
Been using for a couple of days now and it is the best rom by far for everyhting, tried lineage android 10 and 11, both of them make the tab run very hot in games and after a few mins the graphics glitch so bad it is unplayable.
This rom however, the games run great and the tab only gets warm. Also battery usage is superior to all other roms ive tried.
Thank you for your hard work.
Glad to see the link still works, shame this was the last rom ive tried, the last happens to be the best
Project Pixel P 1.0
What is Project Pixel?
Project Pixel is a small team of developers that work on porting most, if not all of the Google Pixel features to stock firmwares.
We mostly specialize in Stock Samsung Firmwares, although we may do work on ports of OneUI once in a while. Our objective is to deliver the best performance by using stock firmware whilst also improving upon it by debloating and tweaking whilst also giving you all the features of a Pixel device.
Pixel Pie 1.0 Feature List:1. AdAway
2. Deep Debloat and DeKnoxed (Apps, permissions, framework, unnecessary features-stripped and removed)
3. Dolby Atmos with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
4. Eleven Music (Lineage OS 15.1)
5. Files GO (File Manager)
6. GCam (Note: GCam might not work on all devices, because of hardware compatibility) v6.3
7. Google Calculator
8. Google Calendar
9. Google Chrome
10. Google Clock
11. Google Contacts
12. Google Keep (With Handwriting Libs)
13. Google Lens (Works within Google Photos and Recents in Pixel Launcher)
14. Google Messages
15. GPay (Working Payment Method along with NFC functionality)
16. Google Phone
17. Google Pie Emojis (Not Samsung Ones)
18. Google Play Games
19. Google Tasks
20. GBoard
21. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
22. Pixel Fonts
23. Pixel 3 Boot Animation
24. Pixel 3 Live Wallpapers with Normal Wallpapers
25. Pixel Google Photos (Free Original Quality Storage)
26. Pixel Module V1 - Pixel Animations, framework and configs.
27. Pixel Launcher with new recent menu
28. Pixel Sounds
29. Samsung Digital Wellbeing
30. Samsung App Lock
31. Samsung Gallery (Stripped Down and lightened to improve performance)
32. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes (4k30 at HDR- Not Fully Tested)
33. SystemUI Tuner (Provides battery stats along with other useful customiztions - Check QS icons and add it to QS Panel to view)
34. VoLTE Supported
35. YouTube Vanced (Ad-free Youtube)
CHANGELOG 1.0
Initial Release
Bugs:
ROM will not boot without Magisk.
Notes:
1. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
2. Make sure you set Google Phone as your default phone app. Go-to Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
3. After first boot, reboot your device once to ensure dalvik optimization.
INSTALL INSTRUCTIONS:
1. Download the zip and the latest Magisk.
2. Wipe System, Data, Dalvik Cache and Cache
3. Flash the zip and then flash Magisk.
Download Link and Sources:
Feel free to join us telegram via the group: https://t.me/joinchat/G-BflEMjGlgp1NeWxDA2bA
Download Link 1.0 :https://drive.google.com/file/d/14j_RVzN2ZmJuxeZElwsMmtkbCuZB5z8V/view
Magisk:https://github.com/topjohnwu/Magisk/releases
Kernel Source: source.samsung.com
Credits:
Google for Android and Framework
Samsung For Their Kernel
Check the screenshots tab to see screenshots of the ROM in action.
XDA:DevDB Information
Project Pixel P, ROM for the Samsung Galaxy Note FE
Contributors
Visera, Skulldron
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Bootloader & Modem
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2019-07-27
Created 2019-07-27
Last Updated 2019-07-26
Reserved
Hey guys, some things:
1) Read the first post if you don't know how to fix the dialer problem. I get this a lot.
2) This is the new version of Team Pixel, so the old thread will re-start here.
3) The rom currently doesn't boot when you don't flash Magisk. It's something with the stock rom, so flash Magisk after you flash the rom.
Looks good among the two other ROMs for Note FE which I see many people complain about them!
Can anybody confirm if from experience it's better than stock or not?
Is it same as the previous PIXEL PIE-1 or new update?
fahad0000 said:
Is it same as the previous PIXEL PIE-1 or new update?
Click to expand...
Click to collapse
New
Some feedbacks for this rom are Screen Off Memo and write on screen features are not working. Beside that everything is fantastic. This rom gives me the most stable mobile network and signal amongst the others and I didn't have to reset and manually set my network in order to receive and make calls like other roms, they all shared the same problem from stock to custom except this one
which gcam 6.3 version works with Note FE exynos pie?
I thought only gcam 5.1 is stable, 6.1 and 6.2 are full of bugs/crash
I'm having problems figuring out how to get root access on this ROM.
- I've unlocked Developer options (there seems to be nothing in there).
- I've installed SuperSU from the App store. It doesn't see root.
- I've tried the root method from the base installer; installing the TWRP Hack from Download mode. No luck.
- I've tried installing SuperSU from TWRP. That causes the system to boot loop.
- I've tried updating Magisk. That causes the system to boot loop.
I feel like there is something super simple I am missing.
Hello. Is this tested on bootloader v5?
viper001 said:
Hello. Is this tested on bootloader v5?
Click to expand...
Click to collapse
I'm using the bootloader from this thread:
https://forum.xda-developers.com/note-fe/how-to/sm-n935f-ds-how-to-flash-twrp-root-t3733030
I can confirm that works. That one is Bootloader v5.
I should state that the only version of Magisk that works from what I've found is the one in this thread. Newer versions cause bootloops.
LighthammerX said:
I'm having problems figuring out how to get root access on this ROM.
- I've unlocked Developer options (there seems to be nothing in there).
- I've installed SuperSU from the App store. It doesn't see root.
- I've tried the root method from the base installer; installing the TWRP Hack from Download mode. No luck.
- I've tried installing SuperSU from TWRP. That causes the system to boot loop.
- I've tried updating Magisk. That causes the system to boot loop.
I feel like there is something super simple I am missing.
Click to expand...
Click to collapse
You flash Magisk? SuperSU doesn't work anymore afaik.
viper001 said:
Hello. Is this tested on bootloader v5?
Click to expand...
Click to collapse
Skulldron said:
You flash Magisk? SuperSU doesn't work anymore afaik.
Click to expand...
Click to collapse
I actually planned on getting back to this. Thanks for the followup.
The resolution was this:
- I flashed the Magisk link in this thread and then the most current Magisk app.
This was seemingly the problem but I don't exactly know why.
The fix was to make sure I had the most current Magisk app and Magisk flashed.
Rom is buttery smooth even without Magisk. (used the TWRP patch by RicePlay after installing the rom then it started to boot afterward).
Here's a couple of snapshots:
What I did to install this was:
1) Download the ROM image and the TWRP patch
2) Format/clear system, data, cache, etc..
3) Install ROM image
4) Wipe dalvik
5) Install TWRP patch
6) Wipe Dalvik
7) Reboot to System
Optional step for root access:
8) Install Magisk Canary (debug)
I'm not sure if anyone else has experienced this but we cannot disable the core-only mode once Magisk 19.3 is installed. I even tried toggling off the core only mode via Magisk Manager module via TWRP Terminal yet to no avail after a restart.
Bình said:
Some feedbacks for this rom are Screen Off Memo and write on screen features are not working. Beside that everything is fantastic. This rom gives me the most stable mobile network and signal amongst the others and I didn't have to reset and manually set my network in order to receive and make calls like other roms, they all shared the same problem from stock to custom except this one
Click to expand...
Click to collapse
Install Samsung Notes and you'll be good.
Logcat for bugged Magisk core only mode
I have sent a logcat to the Magisk Canary Debug thread and the latest build(19.4-f383d11d) did not fix the core only mode issue. Kindly refer to this post on the thread for the logcat. I hope a fix can be done on it but other than that, this is a great custom rom
How's the CSC selection or setup on this rom? Been wanting to use my NoteFE for awhile (wanted stock) but can't get my sim settings to stay after reboot (aka just reboots into twrp and doesn't complete) so figured I'd try custom rom
Ok so CSC stuff I answered on my own.
Was curious if anyone having trouble with the CTS profile showing false under the securitynet check? ( Aka want to know if I'm wasting my time trying to figure out how to fix it)
Thank Visera,
"]https://i.imgur.com/FBKKg4h.jpg[/IMG]
"]https://i.imgur.com/oz59lbF.jpg[/IMG]
"]https://i.imgur.com/oU9ZGun.jpg[/IMG]
Hơi thất vọng về Rom. Bản rom này chỉ là một bản SamsungRom được tùy chỉnh lại. Tôi cứ cho rằng là GoogleRom tùy chỉnh lại. Tôi dùng trải nghiệm thì thấy nó chỉ có Launcher giống Google.
A little disappointed about Rom. This rom is just a customized SamsungRom version. I keep claiming that GoogleRom customizes. I used the experience and found it only has Launcher like Google.
:good::good::good::good::good::good:
Is it a bug? Even If I full wiped, I can't get the google login screen at the first boot so that I can't recover my back up data.
cannot place regular voice calls, and theres no incoming call answer or reject menu, the phone just ringing.
is something wrong with the dialer? or just me.