{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.16 by @Androxyde
XZDualRecovery 2.7.124 BETA or newer.
Current rooted FW version: 17.1.A.0.55 or 17.1.A.0.69.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.124 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 17.1.1.A.0.402:
Files (Find the files on the DevDB Downloads tab!):
For D6502: Download D6502_17.1.1.A.0.402.flashable.zip (931MB) and D6502_17.1.1.A.0.402_Stripped.ftf (23MB)
For D6503: Download D6503_17.1.1.A.0.402.flashable.zip (912MB) and D6503_17.1.1.A.0.402_Stripped.ftf (22MB)
Save them somewhere you remember;
Put 'D650X_17.1.1.A.0.402.flashable.zip' on (the external) SDcard1;
Put 'D650X_17.1.1.A.0.402_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'D650X_17.1.1.A.0.402.flashable.zip' in TWRP;
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'D650X_17.1.1.A.0.402_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore a .55 or .69 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
XDA:DevDB Information
[STOCK][D650X][4.4] Update to 17.1.1.A.0.402 [Root & XZDR], ROM for the Sony Xperia Z2
Contributors
[NUT]
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 17.1.A.2.55/.69
Based On: STOCK
Version Information
Status: Abandoned
Stable Release Date: 2014-06-17
Beta Release Date: 2014-06-16
Created 2014-06-16
Last Updated 2014-08-26
ROM STATUS: STABLE
WARNING:
Be prepared to lose everything if it for some reason goes belly up!
Huzzah! Thanks for your hard work, @[NUT]! You were there since the beginning, and without you (and the others) this wouldn't be possible!
Just out of curiosity, what's the base FTF for this ROM?
How do I get TWRP to start instead of CWM?
hidea said:
Huzzah! Thanks for your hard work, @[NUT]! You were there since the beginning, and without you (and the others) this wouldn't be possible!
Just out of curiosity, what's the base FTF for this ROM?
Click to expand...
Click to collapse
D6502 is based on Customized_IN
D6503 is based on Customized_DE
Puffin617 said:
How do I get TWRP to start instead of CWM?
Click to expand...
Click to collapse
Press volume down to enter twrp.
Puffin617 said:
How do I get TWRP to start instead of CWM?
Click to expand...
Click to collapse
Hold vol down on boot or use NUT app to set which recovery will be primary when you restart device. (you'll get that app with recovery)
[NUT] said:
D6502 is based on Customized_IN
D6503 is based on Customized_DE
Press volume down to enter twrp.
Click to expand...
Click to collapse
BTW, the only backup options I see in TWRP are:
Kernel Image
Trim Area
System
Cache
Data
I don't see SDCard
funky0308 said:
Hold vol down on boot or use NUT app to set which recovery will be primary when you restart device. (you'll get that app with recovery)
Click to expand...
Click to collapse
where I can find the NUT app?
pacomicro said:
where I can find the NUT app?
Click to expand...
Click to collapse
If I'm reading this correctly,
The default on first boot with the boot-to-recovery flag set by any recovery is PhilZ Touch Recovery.
In your XZDualRecovery folder in either /cache or /storage/sdcard1 you will find a file called XZDR.prop. Set dr.default.recovery=cwm to dr.default.recovery=twrp to change the default recovery to TWRP. The button choice however takes precedence, so you can always overrule the default!
You can also change back to 'Vanilla CWM' if you wish by changing dr.vanilla.cwm=false to dr.vanilla.cwm=true in the XZDR.prop file.
Init.d support is disabled by default, set dr.enable.initd to true to enable it.
Insecure ramdisk support is disabled by default, set dr.insecure.ramdisk to true to enable it, set to 'power' to boot it by pressing the power button at boot.
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/showthread.php?t=2261606
pacomicro said:
where I can find the NUT app?
Click to expand...
Click to collapse
Once you're done with flashing all the files and reboot your phone, you will see a new app installed. That's [NUT]'s app.
funky0308 said:
Hold vol down on boot or use NUT app to set which recovery will be primary when you restart device. (you'll get that app with recovery)
Click to expand...
Click to collapse
Cant get it to work... Do I really NEED to use TWRP? PLease help...
---------- Post added at 06:16 PM ---------- Previous post was at 06:15 PM ----------
Something is not right. When I keep VOL down with reboot the device stays black
UPDATE : Got everything done Thanks
Am on 402 rooted without even touching the bootoader
@[NUT]
OK mate...
Awesome work
Ahh, yes. @[NUT] app is actually in the app drawer, and it's called NDR Utils. The icon is a cute red little devil! The app will let you choose which primary (default?) recovery to use. Also, has a bunch of power menu options.
Now… slightly off topic; will we be seeing a similar XZDR and ROM for the Z2 tablets (particularly the 16GB WiFi/SGP511)?
Again, thanks for the good work, @[NUT]!
Super!!
Fantastic!! Downloading files to downgrade first and then will test this!! Excited and will report back in 3-4 days due to slow bandwidth speeds!
It works! Woohoo!
I'm happy to report that I went through the entire process (downgrade to .55, rooted via Community RootKit, installed dualrecovery, then flashed [NUT]'s files) and I'm on 402 with locked bootloader and everything's working well so far! :good::laugh::highfive:
Guys, AWESOME work...
Being on .402, rooted, TA backed up, locked, seems almost unreal
ok everything went well but i have no network signal just a red cross next to the icon
Strangeland16 said:
ok everything went well but i have no network signal just a red cross next to the icon
Click to expand...
Click to collapse
What model? Did you flash the entire ftf as instructed?
hidea said:
Now… slightly off topic; will we be seeing a similar XZDR and ROM for the Z2 tablets (particularly the 16GB WiFi/SGP511)?
Click to expand...
Click to collapse
I'm working on the Recovery at least, using my DIY guide some brave and helpful soul should be able to create a package then.
Strangeland16 said:
ok everything went well but i have no network signal just a red cross next to the icon
Click to expand...
Click to collapse
Try to go to Settings -> More -> Internet settings and download your network settings.
[NUT] said:
What model? Did you flash the entire ftf as instructed?
d
I'm working on the Recovery at least, using my DIY guide some brave and helpful soul should be able to create a package then.
Click to expand...
Click to collapse
im on d5603 and yes followed instructions to the letter but the phone finds no network
Related
Main thread + Features + Dev support
http://forum.xda-developers.com/showthread.php?t=2201860
CWM 6.0.4.8 Advanced Edition / PhilZ Touch Recovery 6.41.6
PhilZ Recovery is a CWM Advanced Edition that adds all the features you could ever miss in CWM.
It is a well proven recovery for many phones.
Please give your feedback, what works, and any bug you could encounter.
Read the features at the Main thread, and check if you are missing something.
To take a screen shot, just slide left!
And don't forget to read about powerful aroma file manager integration and double-tap shortcut (in FAQs).
How to install recovery?
From download link below, you'll get a 'recovery.img' file. Put that recovery.img file at root directory of your
sdcard. (means not in any folder)
Now, go to terminal emulator.
Give command:
Code:
su
You'll be asked to grant superuser permissions, grant it.
Now, give the following command:
Code:
flash_image recoveryonly /sdcard/recovery.img
Wait until it executes the command (4-5 seconds), it is installing the recovery.
Now, normally reboot to recovery and enjoy new recovery!
Download links
Latest version can be found here:
recovery.img (v6.41.6)
https://docs.google.com/uc?id=0B5c3gpyMBJusWi1XN09fZjkzUWM&export=download
aromafm_tass.zip (v1.91)
https://drive.google.com/uc?id=0B5c3gpyMBJusLTk5ZENsNWpudms&export=download
Click to expand...
Click to collapse
Special thanks to:
@Phil3759 : For this awesome open source recovery.
@chraso: For hosting and compatible flags.
AndroidARMv6 Team: For keeping this device alive.
Cyanogenmod Team: For making all these possible.
XDA:DevDB Information
PhilZ-Touch Recovery for Galaxy Mini, Tool/Utility for the Samsung Galaxy Mini
Contributors
Bhargav97, chraso, Phil3759
Version Information
Status: Stable
Current Stable Version: 6.40.1
Stable Release Date: 2014-05-04
Created 2014-05-07
Last Updated 2014-05-26
:FAQs:
Q: Wanna know about Aroma File manager?
Visit the aroma file manager main thread for more info---> Aroma file manager main thread
Aroma file manager is a touch file manager which can be used while in recovery. It has options for copy, paste, delete,
change permissions and many others. Also, it has a Terminal inside. So, if you forgot to give correct permissions to any
file you can do that directly from recovery. This file manager has got many themes, font, icons, etc. options and it's UI
is fully customizable.
Q: How to start this File manager in Recovery?
Rename the downloaded file to 'aromafm.zip'.
Create a folder 'aromafm' inside 'Clockworkmod' folder on your sdcard.
Now, move that 'aromafm.zip' file to the 'aromafm' folder.
We're ready now, when you want to use it in recovery just double tap anywhere OR go to "philz Settings" and select
"Aroma File Manager" and it will start up.
If you also want to browse /data, /system and /sd-ext then mount them in the "mounts & storage" option in recovery.
Q: Problems with Aroma file manager startup?
After doble-tapping OR selecting 'Aroma file Manager' option under 'philz settings' if recovery gives error: 'aromafm.zip
not found at /clockworkmod/aromafm' then, wait for 4-5 seconds and again select 'Aroma file Manager', because it maybe
busy mounting sdcard.
If still doesn't work, you've made mistakes in steps mentioned in first post, please do again carefully.
Q: Does your phone every time reboots to recovery?
This happens very rare when you flash the recovery using any bad app or via any wrong (not proper) method. What you can do
is:
-If you've made a backup of your current ROM then just restore only it's "boot" and then select 'reboot to system'.
OR
-You don't have a backup? Then just flash the ROM which you are using currently again and wipe 'dalvik-cache'. Then reboot
to system. Booting process will take time.
NEW: Now you can enjoy the full version of the recovery! Thanks to @Phil3759 for uploading necessary commits for armv6. And, everything is expected to be bug-free. Please report the bug here if you find any.
GALAXY MINI GOES OFFICIAL NOW!!!!!!
You'll now find Galaxy Mini in the officially supported devices list at the Main thread.
SCREENSHOTS:
Main menu and PhilZ Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GUI Preferences: all is applied live (no reboot). Up to 14 menu height settings, scroll sensitivity, touch accuracy...
27 color settings + 5 alpha transparency levels for every GUI element
Change background image with a custom png (of your device resolution), a solid color (27 presets) or revert to original
cwm image
User configurable touch gestures (feel free to request for new actions)
Setup your time-zone + 30mn offset, super wipe option to install a new ROM
Backup and Restore any partition in a complete freedom, include modem (.img + .bin) and efs (.img + .tar)
Custom backups can also be restored by original CWM Advanced Restore Menu
TWRP Backup and Restore Support + md5 + single/multivolume format
Support multi-cpu compression, md5 check toggle and custom .android_secure path
Choose ors backup volume target
Flash multiple zip files in a raw
Aroma File Manager + Terminal Emulator: launch with a gesture action (double tap is default)
Full Wipe to Install a new ROM (sdcard is preserved)
Free Browse Mode to install zip files: select a default folder to start with and browse up to the root
Hello and thank you for your work but it reboot to recovery again and it says that cant find aroma.zip in path.
alexanderq said:
Hello and thank you for your work but it reboot to recovery again and it says that cant find aroma.zip in path.
Click to expand...
Click to collapse
u hav to rename it to aromafm.zip
and yeah The Rom doesn't boot after installing this recovery
Faiyaz5yaz said:
u hav to rename it to aromafm.zip
and yeah The Rom doesn't boot after installing this recovery
Click to expand...
Click to collapse
You mean, you are always rebooting to recovery and not to your rom?
If so, it is a problem of your device configuration by your device developer because this happens also in Jenkins recovery. This is not a fault of my recovery.
Now, you can restore boot of a backup (if you made any) or you can install your current rom again and wipe dalvik cache and you'll be back normal.
But i have renamed the zip and it does not work.And i tried another ROM but it all ways reboots to recovery.
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Good work bro.:thumbup:
Sent from my GT-S5570 using xda premium
no
Bhargav97 said:
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Click to expand...
Click to collapse
I didn't restore back up..
I reflashed my previous cwm..
it booted normally
Bhargav97 said:
Can someone else confirm that it always reboot to recovery even after re-installing a rom?
Click to expand...
Click to collapse
I confirm it. I even flashed another ROM and it still reboots to recovery instead of system.
Aroma FM works, but there is something I noticed: If you tap internal sd or external sd, they are empty, you have to go to storage/sdcard00 to get to your sd card. Can you somehow link the external sd to the sd card?
Thanks everyone for reporting....
I'll try to fix this when I get time...
ast00,
Internal sd and External sd will be empty because they are kept there for devices having two different memories. There should be an option: sdcard directly on the root directory. Please see carefully.
Good news:
My friend @chraso gave me hint about the problem. There was a very small problem with tags, I'll be fixing and making updated recovery today/tomorrow. Will also update recovery sources.
First post updated with newer version, v6.22.1 (18.03.2014) and also made changes so that you can boot into ROM after installing it. Hope it's fixed.
Also added some FAQs.
Please post back the Results after using it.
Please give feedback on swipe-touch. Is right/left swipe working? And please post your opinion on the poll above, whether you like swipe touch or it just makes things complex or you just don't like it.
Bhargav97 said:
First post updated with newer version, v6.22.1 (18.03.2014) and also made changes so that you can boot into ROM after installing it. Hope it's fixed.
Also added some FAQs.
Please post back the Results after using it.
Please give feedback on swipe-touch. Is right/left swipe working? And please post your opinion on the poll above, whether you like swipe touch or it just makes things complex or you just don't like it.
Click to expand...
Click to collapse
flashed the latest zip
still not booting into the same rom..
didn't test new rom
Faiyaz5yaz said:
flashed the latest zip
still not booting into the same rom..
didn't test new rom
Click to expand...
Click to collapse
Which ROM are you installing?
Is the install successful?
What procedure you follow? This is important, please tell me. Do you use 'wipe to install a new rom'?
Does not work for me either, it reboots to recovery and i noticed that to make aroma work i must first install the zip from recovery and then it works OK .
not that
Bhargav97 said:
Which ROM are you installing?
Is the install successful?
What procedure you follow? This is important, please tell me. Do you use 'wipe to install a new rom'?
Click to expand...
Click to collapse
I mean I just changed the recovery didn't touch any roms.. after changing recovery , it keeps bootin to the recovery
Bro,
please read FAQs, this is a problem of your device sources. For solution, see FAQs.
After that, please give me broader report.
You di not ask the right question:
Does this work for someone , anyone please confirm.
KK 10.5.A.0.230 UPDATE SGP311 to 4.4.2 FR / SGP312 to 4.4.2 VMo UK + ROOT
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are on rooted Tablet Z SGP311/312 4.1/4.2/4.3 you can update to this latest version following the guide, just download 4.4 update and start with point 10.
Requirements:
1. Flashtool 0.9.15+ (download)
2. XZDualRecovery 2.7.123 or newer.
3.1. Back to 4.1.2 and Rooting or
3.2. Rooted Android 4.3 10.4.B.0.569 or newer
4.1 Tablet Z SGP311[/URL])
How to update:
1. if you're in non-rooted 4.3, non-rooted 4.2, etc., flash SGP31X 4.1.2 FTF using FlashTool and root
Xperia TabZ Android 4.1 FTF
TabZ 4.1 ROOT - How to
2. Select Debugging on from the Settings Menu
3. Select Unknown Sources under Security Menu in Settings
4. Download 4.4 .zip and stripped.ftf:
Google Drive:
SGP311 :
working 4.4 root for SGP311 in General Discussion > http://forum.xda-developers.com/showthread.php?t=2767847
SGP312:
RAR file (ZIP+FTF)
RAR MD5: EAFBA854DC7408250050356BF882BA95
this zip and ftf work without errors 5. Put 'SGP3XX_4.4.flashable.zip' on (the external) SDcard1;
6. Put 'SGP3XX_4.4.ftf' inside the Flashtool/firmwares folder;
7. Download XZDualRecovery (latest Version is TabZ-lockeddualrecovery2.7.123.beta.installer.zip), and unzip
http://nut.xperia-files.com/8. connect your tablet and install the XZ Dualrecovery folder Install.bat file
9. Select the Option as SuperUser (2), it will copy all the stuffs and reboot and start in Philz Recovery.
For clean 4.4 installation with root click "Clean to Install a New ROM" in Wipe Data/Factory Reset
10. Flash 'SGP3XX_4.4.flashable.zip' in Philz,
11.. do not reboot but go back to the main menu, then go to Power->Power off
12. Flash everything in 'SGP3XX_4.4.stripped.ftf';
13. Reboot to system without clearing (dalvik-/)cache.
14. Connect your tablet and once again install the newest XZDualRecovery, Tablet will reboot into Recovery, now just click 'system reboot'
If works hit "thanks" button
!!! Create a backup of your TabZ in CWM or TWRP and don't forget to backup the contents of 'SDCard0';!!!
!!! Please read the instructions clearly and flash.!!!
!!! Its your Tablet and I will not responsible for any brick/failures on your Device.!!!
Thankx Dude. Could you make a 312 version? :good:
Jonfensu said:
Thankx Dude. Could you make a 312 version? :good:
Click to expand...
Click to collapse
tomorrow send me ftf file
ryany67 said:
tomorrow send me ftf file
Click to expand...
Click to collapse
I am uploading (3H remaining) to Mega the VMo UK_IE version :good:
PS. Could you release the Fix for Settings lag+Deodexed for 311/312?
EDIT. Here you go
https://mega.co.nz/#!F9Fi3SRT!QiEzU1RooEeV6pZ9DwHdX7fMhu-vlkBqFCJBe_wV0R8
I've tried to flash and followed the instructions to the letter.
I got an error (code 7) while flashing "SGP311_4.4.flashable.zip" in recovery.
Despite the error, I continued the installation process and could get the system working fine, except I have no root access.
gustavo.rocha said:
I've tried to flash and followed the instructions to the letter.
I got an error (code 7) while flashing "SGP311_4.4.flashable.zip" in recovery.
Despite the error, I continued the installation process and could get the system working fine, except I have no root access.
Click to expand...
Click to collapse
what tablet model and rom do you have? rooted stock 4.1 - 4.3 for SGP311?
can i put the file on the internal sd-card? don't have an external one, yet.
Sent from my GT-I9100 using Tapatalk
if i'm on 4.3 rooted should I start from pt2 or do i need to follow a different procedure?
Can't download .zip file from Google drive-download limits (too many users downloaded...) Please a mirror..
Thanks!
Riekr said:
if i'm on 4.3 rooted should I start from pt2 or do i need to follow a different procedure?
Click to expand...
Click to collapse
download ftf and zip and start with no.10.
Someone please upload this to a mirror.
Thank you.
finally a clear guide to root sp311 non rooted, i`ll follow it and hopefully i`ll manage to root my Z having KK rooted.
i assume strating from 4.3 not rooted doesn`t matter with FW versiion is been running on it (ie the last release of 4.3)
Pls anyone,upload SP311 .zip file to some mirrors-it's impossible to download it from google drive (too many downloads)...
Thanks!
ValVK said:
Pls anyone,upload SP311 .zip file to some mirrors-it's impossible to download it from google drive (too many downloads)...
Thanks!
Click to expand...
Click to collapse
Create your own google account and copy my file into your google drive. Then you can, without limit, everything download.
Sorry but on megaupload i dont have any account and free hostings are too slowly to up- and download smthng
Thanks for the tip! I have a Google drive account,but i can't copy that .zip file to my account...
Or i'm a blind man with my 4 eyes -i don't see,how i can do it...Can you pls point me to that???
Thanks for help!!!
ValVK said:
Thanks for the tip! I have a Google drive account,but i can't copy that .zip file to my account...
Or i'm a blind man with my 4 eyes -i don't see,how i can do it...Can you pls point me to that???
Thanks for help!!!
Click to expand...
Click to collapse
Hmmm... Im not at home now, im on tablet. Ill do it later^_^
Maybe you have a md5 sum for that .zip file? I think i got it done,but would be nice to be sure,if .zip file is intact.
Thank you!
gustavo.rocha said:
I've tried to flash and followed the instructions to the letter.
I got an error (code 7) while flashing "SGP311_4.4.flashable.zip" in recovery.
Despite the error, I continued the installation process and could get the system working fine, except I have no root access.
Click to expand...
Click to collapse
I have the same problem
As i was reading on xda,that error code 7 mostly is related on version Flashtool or recovery.
It must me exactly as p.1 and 2 in OP.
Same error for me flashing SGP312 with the latest TabZ-lockeddualrecovery2.7.123-BETA.flashable.zip from NuT.
Fails on set_perm for me
Hangs now at sony name on boot...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My-ROM based on B135 (Israel)
System is slimmed down with unnecessary applications and add-ons.
Decided to based project on this release because at this moment B135 this is better system on P7-L10.
After installation You will have a stable, light, fast and no battery drain system fully accessible and fully rooted .
Just see how efficiency could be MyROM with smart regulations .
Impressive ?
MyROM current version: v1.2
Features:
Custom boot animation
Removed unwanted apps
External SdCard fixed (Xposed module)
Rooting possibility (on demand)
Removed set_immutable.list (full rooted)
Working 4G/3G/2G network mode
Android L Navbars installed
Hiding navbars enabled
Double tap status bar to screen of (Xposed module)
EMIU3.0 File Manager installed
Some other changes...
If You have any suggestions report here
Preinstalled add app:
AddAway (advertisement gone)
Xposed with some modules (some useful add-ons)
Holo Light Reboot (easy reboot)
SuperSU (full root)
Changelog v1.2:
Slimmed ROM to ~ 585MB
Optional gaps are excluded to separate installation by zip file (MyROM_add-gapps.zip)
Optional gaps can by uninstalled by user
Theme bug removed
Attention ! Version v1.2 required clean and carefully installation !
Known bugs:
If You found report here
Requirements:
Bootloader unlocked
How to install:
Clean installation (recommended):
Backup your important data (I recommend to use Huawei Backup application)
Download a package and unpack files to external SD card
If You have TWRP 2.8.1.0 installed (not earlier !) go to the next point. Other case:
Install Fastboot and ADB on Your PC.
Reboot device into Bootloader mode (press power and vol- buttons),
Flash TWRP command: Fastboot flash recovery TWRP-2.8.1.0.img
Reboot device to Recovery mode (press power and vol+ buttons)
Go to Advanced wipe and wipe: Dalvik, System, Cache, Data, Custom storage and optionally but recommended Internal memory
Install ROM (p7-l10_MyROM_v1.x.zip)
Install SuperSU (UPDATE-SuperSU-v2.16.zip)
Install Added gapps (MyROM_add-gapps.zip)
Reboot and configure system
Restore from backup settings and user applications (but only user app!) *.
*- If you use HwBackup I suggest to restore all app to internal memory. (Backup->Settings option)
Update (only from MyROM):
Download a package and unpack files to external SD card
Reboot device to Recovery mode
Install ROM (p7-l10_MyROM_v1.x.zip)
Install SuperSU (UPDATE-SuperSU-v2.16.zip)
Install Added gapps (MyROM_add_EMUI3.0_gapps.zip)
Go to Advanced wipe and wipe: Dalvik cache and Cache
Reboot and configure system
Optionally: (If You installed Added gapps)
Open AdAway. install host files to advertisement blocking
Open XPosed and install framework and check in preinstalled module.
Go to Settings->Disable resource hooks and check it !!
Removed applications
If here are people who are missing for Huawei and Google applications I prepare package with some removed app. Package consist:
Google Drive
Huawei Browser (non uninstallable)
Swype for Huawei
Google Search
Google Music Play
Install it by TWRP. All applications (exception one) can by easily uninstalled by user.
Have fun ! and If you like my project just press Thanks button
Credits:
Huawei !
XDA users !
Everyone who compiled at least one line of included aps !
-------------------------------------------------------------------------------------------------
XDA:DevDB Information
MyROM, ROM for the Huawei Ascend P7
Contributors
Ziolek67
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: B116,B121,B133,B136,B138 or later
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2014-11-25
hello,
at the sight of your rom, what changes compared to Se7en rom? because I do not see too much change
reply
can u just plz remove the carrier name that would be amazing, cuz my carrier name is too long
Help me pls
Hello and Congratulations developer for your Rom: this is my situation, I want to come back from 3.0 se7en Rom and try your Rom that is for 2.3 system, How can I do it????, I try using a chinese web site where you can revert from 3.0 to 2.3. I downloaded and installed using dload but nothing happened, please help me to come back to 2.3 please !!!!
this is the link of the chinese web site to download the dload carpet to revert the rom.
http://cn.club.vmall.com/thread-1359415-1-1.html
Good work man :good:
Godwarrior1 said:
Hello and Congratulations developer for your Rom: this is my situation, I want to come back from 3.0 se7en Rom and try your Rom that is for 2.3 system, How can I do it????, I try using a chinese web site where you can revert from 3.0 to 2.3. I downloaded and installed using dload but nothing happened, please help me to come back to 2.3 please !!!!
this is the link of the chinese web site to download the dload carpet to revert the rom.
http://cn.club.vmall.com/thread-1359415-1-1.html
Click to expand...
Click to collapse
Use My Guide Link to Guide
Just FLash Stock Recovery and FLash Cust.img and Then Do 3 Button Force Upgrade
Godwarrior1 said:
Hello and Congratulations developer for your Rom: this is my situation, I want to come back from 3.0 se7en Rom and try your Rom that is for 2.3 system, How can I do it????, I try using a chinese web site where you can revert from 3.0 to 2.3. I downloaded and installed using dload but nothing happened, please help me to come back to 2.3 please !!!!
this is the link of the chinese web site to download the dload carpet to revert the rom.
http://cn.club.vmall.com/thread-1359415-1-1.html
Click to expand...
Click to collapse
http://forum.xda-developers.com/ascend-p7/general/roll-to-emui-2-3-p7-l10-l10-t2935025
And where is this menu settings like on your screen?
I have default themed settings menu and after using MixLol theme nothing change.
Good rom but....
Good rom but reporting annoying message saying "defect report reminders" How do I eliminate this message forever? In the other custom roms I have tested do not show this message , I followed all procedures you recommended for the installation !!!!
jkmaxfli said:
And where is this menu settings like on your screen?
...
Click to expand...
Click to collapse
Which screen do You mean ? Because there's four screens in this image. But is irrelevant which theme You use. This is standard menus.
Godwarrior1 said:
Good rom but reporting annoying message saying "defect report reminders" How do I eliminate this message forever? ...
Click to expand...
Click to collapse
This message appears in many ROMS after incomplete/not exactly installation. I think (but not sure) that is custom storage problem.
I had this message two times in the past with others ROMS. I always had to reinstall ROM after exactly wiping custom storage.
Another way is to flashing custom storage (original) by Fastboot. It was always resolving this issue for me.
How???
Ziolek67 said:
Which screen do You mean ? Because there's four screens in this image. But is irrelevant which theme You use. This is standard menus.
This message appears in many ROMS after incomplete/not exactly installation. I think (but not sure) that is custom storage problem.
I had this message two times in the past with others ROMS. I always had to reinstall ROM after exactly wiping custom storage.
Another way is to flashing custom storage (original) by Fastboot. It was always resolving this issue for me.
Click to expand...
Click to collapse
What is the command I should use for flashing custom storage ??? I tried using "fastboot -w" without success
Godwarrior1 said:
What is the command I should use for flashing custom storage ??? I tried using "fastboot -w" without success
Click to expand...
Click to collapse
Fastboot flash cust cust.img
Sorry but....
Ziolek67 said:
Fastboot flash cust cust.img
Click to expand...
Click to collapse
There are a lot of cust files to download around here, What cust should I use for your rom????, can you give me a link or upload the cust to me please. You are a very kind person. thanks !!!!:fingers-crossed:
Godwarrior1 said:
Good rom but reporting annoying message saying "defect report reminders" How do I eliminate this message forever? In the other custom roms I have tested do not show this message , I followed all procedures you recommended for the installation !!!!
Click to expand...
Click to collapse
This is Not Due to Custom Storage !
To Fix This , Find This Line in Build.prop
ro.config.hw_showTestInfo=
Click to expand...
Click to collapse
It would Be True ,just Change it to false , save the build.prop and reboot . The Test Version Reminder should be gone
little arrow to hide navigation bar
Definitely a perfect job , but I still for each modified rom lack basic thing and that is an little arrow in the left corner of the navigation bar to hide the navigation bar.
Please put it there .
thank you
andromodgod said:
This is Not Due to Custom Storage !
To Fix This , Find This Line in Build.prop It would Be True ,just Change it to false , save the build.prop and reboot . The Test Version Reminder should be gone
Click to expand...
Click to collapse
My setting is true but this reminder isn't showing [emoji14]
Sent from my HUAWEI P7-L10
It worked for me
Ziolek67 said:
My setting is true but this reminder isn't showing [emoji14]
Sent from my HUAWEI P7-L10
Click to expand...
Click to collapse
To Fix This , Find This Line in Build.prop It would Be True ,just Change it to false , save the build.prop and reboot . The Test Version Reminder should be gone
Thanks developer "andromodgod", I went to the editor and changed the position for false and after booting the message dissapeared forever. :good: I recommend using root explorer to give root w-r permissions and make these changes, here is the link
for the file: https://www.dropbox.com/s/ru2g1jl2z240m9z/RootExplorer%20A3.0%2B%20v3.1.9.apk?dl=0
Hi,
New version MyROM v1.1 released. Some requested feature applied. For details just read changelog in first post.
Themes do not work
Ziolek67 said:
Hi,
New version MyROM v1.1 released. Some requested feature applied. For details just read changelog in first post.
Click to expand...
Click to collapse
I have the necessity to give you feedback of your rom Myrom 1.1, when I wanted to change the default theme for my favorite theme, it does not change anything at all. The interface, the background, the icon remain in the same shape, color and position. Please correct this because I started loving this rom....
Godwarrior1 said:
I have the necessity to give you feedback of your rom Myrom 1.1, when I wanted to change the default theme for my favorite theme, it does not change anything at all. The interface, the background, the icon remain in the same shape, color and position. Please correct this because I started loving this rom....
Click to expand...
Click to collapse
Hm... on my device it work perfectly. Do you updated ROM or clean installed ?
If updated did you wipe dalvik cache and cache by recover?
Did you clean cache by Phone manager ?
If you still have a problem than:
Use Root Explorer and remove/delete MixLol.hwt from rot\system\themes folder and restart and clean cache by Phone manager.
Maybe You have doubled theme "MixLol.hwt" ? One on SD card and the second in system folder because in this version I installed this theme as official (inside system)
Team Win Recovery Project 3.0.2-1
WARNING #1: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
You generally don't have to worry, as it's incredibly hard to brick a Samsung device, and physical damage warranties should be exempt from Knox triggering.
WARNING #2: The Galaxy S6 edge (6.0+) stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
You can find the device page here:
http://teamw.in/devices/samsunggalaxys6edge.html
There is a download link there, as well as instructions on how to flash it.
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://idlekernel.com/flash-tools/
FULL STEPS FOR ROOTING YOUR DEVICE
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Extract Odin_3.10.7.zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for your device variant.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] + [Power] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot without touching any other options, then press [Start].
Hold [Volume Up] + [Home] + [Power] buttons near the end of the flash, and keep holding them until you are in recovery.
At this point, you will reach the screen asking you if you want to allow system modifications.
By swiping right, you will trigger dm-verity, and if you don't follow step 12 you will be unable to boot!
If you are going to root your device and follow the rest of these steps, then it is safe to swipe right and enable modifications.
Only if you want your internal storage or data partition to work in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Go to [Reboot] -> [Recovery].
If you only want a bootable system partition or readable data in TWRP:
Download dm-verity and force encryption disabler.
Without exiting TWRP, transfer no-verity-opt-encrypt.zip to your device over MTP* and flash it using [Install] in TWRP.
** If your internal storage is encrypted, you will need to use adb sideload instead.
Go to [Reboot] -> [System].
Wait up to 5 minutes for your device to finish setting itself up.
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
CHANGES
v3.0.2-0 (twrp.me) - same as v3.0.2-1
v3.0.2-1 - New device tree and kernel, support added for Marshmallow, f2fs, and MTP.
v3.0.2-0 - See here for the changes.
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format)
NTFS file system support (read, write)
ADB root
Full SELinux support
Built in android 6.0 tree
KNOWN ISSUES
Samsung encryption is not supported yet in TWRP 3 (see: https://gerrit.omnirom.org/#/c/17308/)
CONTACT & SUPPORT
You can find us on IRC at #twrp on chat.freenode.net.
You can also post in this thread and I will attempt to answer any questions you may have.
SOURCE CODE
TWRP: https://github.com/omnirom/android_bootable_recovery (android-6.0)
Device tree: https://github.com/TeamWin/android_device_samsung_zerolte (android-6.0)
Kernel: https://github.com/jcadduono/nethunter_kernel_noblelte (twrp-6.0)
CONTRIBUTIONS
Gerrit for TWRP: http://gerrit.omnirom.org/
Gerrit for officially supported devices: http://gerrit.twrp.me/
XDA:DevDB Information
Team Win Recovery Project - Samsung Galaxy S6 edge, Tool/Utility for the Samsung Galaxy S6 Edge
Contributors
jcadduono, Team Win & friends
Source Code: https://github.com/jcadduono/android_device_samsung_zerolte
Version Information
Status: Stable
Current Stable Version: 3.0.2-0
Stable Release Date: 2016-05-27
Created 2016-04-08
Last Updated 2016-10-02
Builds are coming soon, just putting a thread up for a reference on the device page!
jcadduono said:
Builds are coming soon, just putting a thread up for a reference on the device page!
Click to expand...
Click to collapse
Sweet, stick a mention that G925W8 users flash T-Mobile variant plz. [emoji6] thanks for this! Now my friends can read.
Sent from my SM-G925W8 using XDA-Developers mobile app
christopherrrg said:
Sweet, stick a mention that G925W8 users flash T-Mobile variant plz. [emoji6] thanks for this! Now my friends can read.
Sent from my SM-G925W8 using XDA-Developers mobile app
Click to expand...
Click to collapse
there won't be a marshmallow G925W8 or G925T build until kernel sources are released. afaik neither of those devices have 6.0 officially yet.
they will still be using lollipop at 3.0.2-0 for now.
for others:
https://idlekernel.com/twrp/zerolte see 3.0.2-1, should be built soon on official, whenever someone confirms that everything is working ok
this includes:
adb shell
brightness slider
installing zips
formatting partitions (as ext4 and f2fs)
not crashing
backup & restore works for each partition
mtp
vibration
otg storage
whatever else you can think of checking
check on both L and M bootloaders, preferably quote my list with Y(working)/N(not working) in front of issues, and give recovery.log
I have successfully flashed the latest twrp. Though I had issues with the older one in backup restore area. Does the new do up backup and restore without error?
Nothing for SM-G925I ? zeroltedv
Ognjen123 said:
Nothing for SM-G925I ? zeroltedv
Click to expand...
Click to collapse
Brother I am using g925i only. Go to arter97 kernel page and download the recovery which he has modded for both and F and I variants.
jcadduono said:
there won't be a marshmallow G925W8 or G925T build until kernel sources are released. afaik neither of those devices have 6.0 officially yet.
they will still be using lollipop at 3.0.2-0 for now.
for others:
https://idlekernel.com/twrp/zerolte see 3.0.2-1, should be built soon on official, whenever someone confirms that everything is working ok
this includes:
adb shell
brightness slider
installing zips
formatting partitions (as ext4 and f2fs)
not crashing
backup & restore works for each partition
mtp
vibration
otg storage
whatever else you can think of checking
check on both L and M bootloaders, preferably quote my list with Y(working)/N(not working) in front of issues, and give recovery.log
Click to expand...
Click to collapse
G925W8 PC5 sources are up. Nothing for the 920W8 yet.
violin.siva said:
Brother I am using g925i only. Go to arter97 kernel page and download the recovery which he has modded for both and F and I variants.
Click to expand...
Click to collapse
Can you please pm the link ?
---------- Post added at 11:16 PM ---------- Previous post was at 11:06 PM ----------
Can the twrp-3.0.2-1-zerolte.tar.md5 be flashed on the g925i ?
Why aren't the link working?
G925f link?
Inviato dal mio SM-G925F utilizzando Tapatalk
Is the topic dead ? Anybody can tell me what recovery they are using on g925i 6.0.1 android ?
Ognjen123 said:
Is the topic dead ? Anybody can tell me what recovery they are using on g925i 6.0.1 android ?
Click to expand...
Click to collapse
Twrp 3.0.2 with arter97 kernel. Working flawlessly in my g925i.
This is making me crazy , is there any suport here ? Links not working , where from to dl the 3.0.2-1 ver for g925i ?
OEM Unlock ??
I can't find it in my Developper Menu. I have 6.0.1 !
Help please...
Anyone found a working link for the recovery file?
Questions about TWRP versions found over some threads
I would like to know some things. Firstly say there's still nothing when you open http://teamw.in/devices/samsunggalaxys6edge.html
so, i looked up the link you gave
https://idlekernel.com/twrp/zerolte
but if I don't remember wrong, zerolte is S6 flat.
Does that kernel work anyway?
If that's so, does that mean official http://teamw.in/devices/samsunggalaxys6.html or TWRP S6 Edge Europe Version would also work?
Why wouldn't they?
Also, what's the difference with the twrp from @arter97 found Here
with yours?
Thanks!!
I hope someone could shed some light over those questions.
Sorry for my bad english!
Nobody is answering from them here , 0 suport . Kernel from arter97 and twrp recovery from him work fine .
Ognjen123 said:
Nobody is answering from them here , 0 suport . Kernel from arter97 and twrp recovery from him work fine .
Click to expand...
Click to collapse
See my above post.
Alright, this is what I did for my S6 Edge 925F which works fine so I thought I would share it with you guys:
I flashed the latest TWRP using ODIN from this link:
http://www.arter97.com/browse/S6/ke...r97-recovery-g925fi-13.1-twrp_3.0.2-0.tar.md5
which is the same link given at the bottom of this post along with the instructions as well:
http://forum.xda-developers.com/showpost.php?p=60390986&postcount=5
After rebooting the phone (which looped a couple of times), I flashed the latest SuperSU 2.71 (Beta) from ChainFire in the newly flashed TWRP which is given here:
http://forum.xda-developers.com/showthread.php?t=1538053
And now I have TWRP with SuperSU. I need to mention that I rooted my phone with CF-Auto root previously so it was already rooted, but I just wanted to have custom recovery for flashing other .zip files.
I also tried the latest stable version of SuperSU first, but it had problems finding and installing binaries. But there are no problems with the latest Beta (2.71) so far.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Honor 8 Pro (DUK)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x.
Intended for usage on stock emui 5.x in combination with unlocked bootloader .
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-duk.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official PHH Superuser Beta 310[/U][/B]
1. download and flash [URL="http://superuser.phh.me/superuser-r310-beta.zip"]official PHH Superuser Beta 310[/URL]
2. install "Phh Superuser" from Google Play
3. Enjoy!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_honor_duk/releases/download/3.1.1-1/twrp-3.1.1-1-duk.img"][U]download twrp-3.1.1-1-duk.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 25. June 2017
Q: which H8 Pro models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
A: Yes you can! (Check FAQ)
Q: Can i install Magisk?
A: No (encrypted /data), Yes (decrypted /data)
Q: Does official SuperSU work?
A: No (encrypted /data), Yes (decrypted /data)
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with fileencryption disabled in fstab
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Honor 8 Pro
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_honor_duk
Version Information
Status: Beta
Created 2017-06-23
Last Updated 2017-06-25
Reserved
Changelog
Code:
[B]TWRP 3.1.1-1[/B]
* fix twrp on emmc based devices
Man that was fast. Will definitely flash this after I get my H8 Pro.
Sent from my Honor 8 using XDA Labs
Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.
To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.
@ +
Via google translate
blattes86 said:
Hello,
I tested the package, unfortunately after the flash and first boot impossible to return under android.
If I remember correctly there was a problem of mount point.
To get out I had to flasher the recovery and system partitions of the original rom.
Having to reset my phone I have no log, but if you need anything else do not hesitate.
@ +
Via google translate
Click to expand...
Click to collapse
this should work for every h8 pro utilizing emmc storage:
https://drive.google.com/open?id=0BxWP2gF_0Bd_OHBPWDctZmJCanc
It has been tested.
Regards
Can we use Magisk instead? Or the loop issue back in Honor 8 is also here?
OldDroid said:
this should work for every h8 pro utilizing emmc storage:
It has been tested.
Regards
Click to expand...
Click to collapse
I flashed it, it works fine.
Thanks
adriansticoid said:
Can we use Magisk instead? Or the loop issue back in Honor 8 is also here?
Click to expand...
Click to collapse
Magisk 13 works fine.
Just flashed the Magist beta and installed the Magisch Manager 5.
-=MoRpH=- said:
Magisk 13 works fine.
Just flashed the Magist beta and installed the Magisch Manager 5.
Click to expand...
Click to collapse
That's great news. Thanks for confirming. :highfive:
Sent from my Honor 8 using XDA Labs
I flashed emmc version and supersu. For going in twrp I've to clic in the middle of the volume button and the power on.
Interesting, i tried to install it but i'm stuck with installion...i know how to enter fastboot mode with phone plugged to my computer with android sdk on, but the adb files look to be missing when i check with cmd...
Can anyone here give a quick tutorial ? Thanks
New Version (3.1.1-1) available - You can find more infos in OP.
This release fixes partition mounting on emmc 5.1 based devices
Source code is now also up and can be built!
https://github.com/OpenKirin/android_device_honor_duk
Regards
Wow that was faster than I could learn to do it.
Great job. May I ask how you got the important informations to build this?
Did you inject su into the image to gain root and then read all the detailed data through terminal or adb or root file explorer?
Just asking cause i train my brain more and more in my spare time and want to get behind the knowledge base to learn. :good:
First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.
I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do I need to choose?
Cheers
Would this work on the Chinese V9 variant?
smouker said:
First of all thank you for your work, I got the Recovery, root, Magisk, etc. running.
I have 2 Questions:
1. the internal storage when I boot to the recovery looks like enrypted (lots of random named folders). Is it possible to decrypt it for now, since there is currently no custom kernel available?
2. Can I flash the Firmware update to 130b in TWRP? If yes, wich package do IP need to choose?
Cheers
Click to expand...
Click to collapse
Format the whole internal storage to remove encryption.
adriansticoid said:
Format the whole internal storage to remove encryption.
Click to expand...
Click to collapse
can I restore Data via TWRP without problems?
adriansticoid said:
Format the whole internal storage to remove encryption.
Click to expand...
Click to collapse
After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt
smouker said:
can I restore Data via TWRP without problems?
Click to expand...
Click to collapse
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.
blattes86 said:
After testing, formatting the whole internal storage does not work.
To restart the partition is new encrypt
Click to expand...
Click to collapse
What do you mean to restart the partition is new encrypt?
adriansticoid said:
Yes it should work. Just make sure that both backup and restore destinations are either both encrypted or both decrypted.
What do you mean to restart the partition is new encrypt?
Click to expand...
Click to collapse
sorry for my bad english.
After restart the phone...