I want to start working with dsixda's Android Kitchen, but unfortunately the Galaxy Ace isn't supported.
If someone is also interested in using this kitchen or just wants to help, please help me filling this in.
Till now I found this using #cat /proc/mounts
change_mnt=yes
sys_mnt=\/dev\/block\/stl12
cache_mnt=\/dev\/block\/stl14
boot_mnt=
data_mnt=\/dev\/block\/stl13
sdcard_mnt=\/dev\/block\/vold\/179:1
# The values below should be set in each file in this folder.
#
# Each file represents a device name (set in ro.product.device of
# build.prop)
#
# If yes, then this device requires changing the mount point
# names in the new updater-script or update-script
# DO NOT SET TO 'yes' IF DEVICE IS BY DELL
change_mnt=no
# If yes, the device is by Dell and requires changing the mount
# point names in the new updater-script or update-script
change_mnt_dell=no
#
# NOTE: The update-script will be converted to updater-script if the
# definition file for the device exists. If 'change_mnt' or
# 'change_mnt_dell' are set to 'yes' then the mount names will
# also be changed.
#
# Mention the mount point names if change_mnt=yes
# Use '\/' instead of '/'
# e.g. sys_mnt=\/dev\/block\/mcblk0p25
#
# If unknown, set to: ???
sys_mnt=
cache_mnt=
boot_mnt=
data_mnt=
sdcard_mnt=
# Set this mount point for the modem.bin in Samsung devices like the Galaxy S2
modem_mnt=
# Set this mount point if you know what it is (e.g. on Motorola Atrix)
webtop_mnt=
# Filesystem info for SYSTEM/DATA/CACHE/etc.
# e.g. param1=ext3, param2=EMMC
param1=
param2=
# If SDCARD filesystem is different from above, then mention it
# e.g. param1_sdcard=vfat, param2_sdcard=MTD
param1_sdcard=
param2_sdcard=
# If CACHE filesystem is different from above, then mention it
param1_cache=
param2_cache=
# If yes, the device does not require using a temp folder when
# flashing the boot.img in the updater-script
fix_boot=no
# Device uses /cache instead of /tmp, e.g. when writing boot.img
use_cache_not_tmp=no
Example of Galaxy S
# Samsung Galaxy S GT-I9000
change_mnt=yes
param1=yaffs2
param2=MTD
param1_sdcard=vfat
param2_sdcard=MTD
sys_mnt=\/dev\/block\/stl9
cache_mnt=\/dev\/block\/stl11
boot_mnt=\/dev\/block\/bml7
data_mnt=\/dev\/block\/mmcblk0p2
sdcard_mnt=\/dev\/block\/mmcblk0p1
modem_mnt=\/dev\/block\/bml12
Hey, i know this is old thread, but i'm interested. There are news about that???
Anybody? Have been stuck on this since yesterday.
i am new..
1jesper1 said:
I want to start working with dsixda's Android Kitchen, but unfortunately the Galaxy Ace isn't supported.
If someone is also interested in using this kitchen or just wants to help, please help me filling this in.
Till now I found this using #cat /proc/mounts
change_mnt=yes
sys_mnt=\/dev\/block\/stl12
cache_mnt=\/dev\/block\/stl14
boot_mnt=
data_mnt=\/dev\/block\/stl13
sdcard_mnt=\/dev\/block\/vold\/179:1
# The values below should be set in each file in this folder.
#
# Each file represents a device name (set in ro.product.device of
# build.prop)
#
# If yes, then this device requires changing the mount point
# names in the new updater-script or update-script
# DO NOT SET TO 'yes' IF DEVICE IS BY DELL
change_mnt=no
# If yes, the device is by Dell and requires changing the mount
# point names in the new updater-script or update-script
change_mnt_dell=no
#
# NOTE: The update-script will be converted to updater-script if the
# definition file for the device exists. If 'change_mnt' or
# 'change_mnt_dell' are set to 'yes' then the mount names will
# also be changed.
#
# Mention the mount point names if change_mnt=yes
# Use '\/' instead of '/'
# e.g. sys_mnt=\/dev\/block\/mcblk0p25
#
# If unknown, set to: ???
sys_mnt=
cache_mnt=
boot_mnt=
data_mnt=
sdcard_mnt=
# Set this mount point for the modem.bin in Samsung devices like the Galaxy S2
modem_mnt=
# Set this mount point if you know what it is (e.g. on Motorola Atrix)
webtop_mnt=
# Filesystem info for SYSTEM/DATA/CACHE/etc.
# e.g. param1=ext3, param2=EMMC
param1=
param2=
# If SDCARD filesystem is different from above, then mention it
# e.g. param1_sdcard=vfat, param2_sdcard=MTD
param1_sdcard=
param2_sdcard=
# If CACHE filesystem is different from above, then mention it
param1_cache=
param2_cache=
# If yes, the device does not require using a temp folder when
# flashing the boot.img in the updater-script
fix_boot=no
# Device uses /cache instead of /tmp, e.g. when writing boot.img
use_cache_not_tmp=no
Click to expand...
Click to collapse
hey man thanks for info .
i use to use xperia x8 and i heard bricked during flashing it.
now i have ace i. bt i still wanna make own Rom. this post May help me.
sorry for poor English.
UPDATES, WARNINGS, AND INSTALLATION STEPS ARE AVAILABLE IN THE 2ND POST
WHAT DOES THIS SCRIPT DO?
* It is the only method, that I am aware of to have apps trully run, and be installed directly to the external storage without completely switching the internal storage with the external storage.
This bings different benefits to different people:
1 - If you have a device that comes from factory with only a small amount of storage available, you can now install as many apps, and apps as big as the partition you setup to use with this script. For example, if you have a phone with only 512 MB of app storage, you can now install games that take over 1GB of app storage so long as your external partition has the space available.
2 - If you bought a 16GB device and wish you had bought a 32GB device, this is great for you as well (I'm one of these). With this script, your apps will not take up any space in your internal storage, which means that your 16GB (or whatever is left of it after factory partitioning, 11.66 GB in my case) is now available for pictures, videos, downloads, backups, or whatever else you might want to put there or have easy access to when you connect your device to your computer.
3 - If you have a lot of Android games, this is great for you too, specially if you're playing games that take a lot of space. Just get a large MicroSD (I have a 64GB partitioned to 32/32) and put as much space as you need in the second partition, and now you can have all your games intalled at the same time. No need to keep uninstalling games so that you can install other ones.
* Once and Done, across the board setup. That's right, launchers, keyboards and widgets will run from the external storage natively, something never done before in Android as far as I know.
This means that once you have the script up and running, you're good to go until the next time you reflash your /system partition. No need to choose what apps to move. No symlinks or anything. Your apps now belong in the external storage, plain and simple.
* No need to backup all your stuff before running the script (and eventually no need to back up your stuff when you want to disable it either).
That's right, the script does the hard work for you. All your stuff gets safely moved to the external storage, with all ownerships and permissions intact. It all happens so smoothly that some people have a hard time telling that the script is already at work. Nothing gets deleted from the internal storage until you're certain that everything is working as expected either. So even if something goes wrong, as long as you have ADB, all your stuff can go back to normal without a problem
(Even though you don't have to backup and restore in order to get the script going, it's always greatly recommended that you keep a backup of your apps).
* Simple intallation:
To get the script going all you have to do is download it, extract it, and run 3 commands in the terminal. It will then ask you a couple of questions, and then you'll be all set. The one downfall is that because the script requires user input (no, the required information cannot be picked from a list), the script cannot be run from a recovery zip. However, I'll emphasize once again that it only takes 3 commands to get the script going.
Also, the script comes with an options file that allows you to setup device specific variables, making the script malleable to work on just about any Android device. Just open the USER_OPTIONS file before runing the install script, and as long as you have the variables there set correctly, the script should be compatible with your device.
* You can still use the external partition for other stuff if you want to. Just remember that it's mounted to /mnt/sd-ext (or /storage/sd-ext in JB). So if you still have a ton of space left in the partition and need the space, you can still use it. Just ensure not to touch the folders Android, app and data.
* Now this is a bit more technically, but in theory, you could a third partition for this script instead of the second partition, and then still be able to use app2sd solutions, though personally I don't see what advantage there would be to doing this since apps would still be in the external storage no matter what.
WHAT DOES THIS SCRIPT NOT DO?
*** IT CANNOT BE CONVERTED INTO A RECOVERY ZIP DUE TO USER INPUT REQUIREMENT ***
*** YOU CANNOT PICK AND CHOOSE WHAT APPS TO MOVE, THAT'S PLAIN AND SIMPLE NOT THE PURPOSE OF THIS SCRIPT ***
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Above you can see my storage screen. If you add the amount of used space and the amount of available space, it's ~18 GB, well over the available 11.66GB in the internal storage. Also note that when the script is enabled, the bar displaying storage usage is unreliable. All other information is reliable, including, and most importantly, the amount of available free space.
Above you can see the output of some commands in the terminal. The most important part of the output for mount above are
Code:
/dev/block/mmcblk0p12 on /mnt/temp/data type ext4 (rw,relatime,barrier=1,journal_async_commit,data=ordered,noauto_da_alloc,discard)
/dev/block/mmcblk1p2 on /mnt/sd-ext/data type ext4 (rw,nosuid,nodev,noatime,barrier=1,data=ordered)
/dev/block/mmcblk1p2 on /data/media/Android type ext4 (rw,nosuid,nodev,noatime,barrier=1,data=ordered)
/dev/block/mmcblk1p2 on /data/app type ext4 (rw,nosuid,nodev,noatime,barrier=1,data=ordered)
/dev/block/mmcblk1p2 on /data/data type ext4 (rw,nosuid,nodev,noatime,barrier=1,data=ordered)
As you can see, mmcblk1p2, the external storage, is mounted to /data/app, /data/data and /data/media/Android, which means that as far as Android is concerned, those folders are in the external storage. Also note that all these mounts took place before /sdcard itself was mounted, meaning that the script is ensuring that these mounts take place soon enough in the boot process to avoid problems related to mounting the app storage locations after Android has loaded the available apps.
Finally, the fact that mmcblk0p12 is mounted to /mnt/temp/data is important because of the next two commands
The output of du -sh shows the amount of storage used by a folder, and as such because the internal storage is mounted to /mnt/temp/data;
/mnt/temp/data/app = internal /data/app = 8KB
/mnt/temp/data/data = internal /data/data = 72KB
/mnt/temp/data/media/Android = internal /data/media/Android = 4KB
whereas
/data/app = 1GB
/data/data = 624.3 MB
/data/media/Android = 5.6 GB
For a grand total of 7.22 GB of used app storage in the external storage as opposed to 84 KB in the internal storage.
CREDITS
*smaw51 - Testing
*ArangeLTX - Testing and Debugging
*Laggan - Testing
*aadiflesher - Testing
*Others who tested the script but weren't in direct contact with me.
*People who said it wasn't possible to run widgets, launchers and keyboards from External Storage (They provided the challenge I needed to make this work)
If anybody needs help or if anything doesn't work, I'll help through irc (much quicker than posting here) on freenode - #and-host
UPDATES:
09-26-2012: Major Update, Overhauled most of previous code.
09-27-2012: Found badass typo in one of the files, fixed and uploaded correction.
09-27-2012: Added install Script.
10-02-2012: Corrected install script so that things now run properly. Don't forget to double check USER_OPTIONS and set ENABLED=true
10-02-2012: Added MMCBLKXPX variable to user options so now devices that mount SD-EXT to different block can use script easily.
10-03-2012: More fixes to the install script, also added check for storage location as well as user input. Started working on compatibility for devices where /sdcard/Android is in different partition from /data
10-03-2012: Updated this post with more organized information.
10-04-2012: Modified script so that debugging output works properly in JB
10-05-2012: Finished working on compatibility for devices with /sdcard and /data in different partitions (PENDING TESTING)
10-05-2012: Added automatic detection for such devices ^ (New variable is automatically created in USER_OPTIONS, called fukedupFS)
10-05-2012: Added extra security for $deletepostmove (Will not take effect until stage 3 is detected)
10-05-2012: Added switch on install script to do a clean install, (using sh ./install-a2sd -clean) which will erase all current options/vars and reset stage to 0.
WARNINGS:
1 - PROCEED WITH THE FOLLOWING STEPS AT YOUR OWN RISK. IF ANYTHING BREAKS I'LL GLADLY TRY TO HELP (IF I CAN), BUT YOU DO WHAT YOU DO AT YOUR OWN RESPONSIBILITY.
2 - THE INSTALLATION SCRIPT REQUIRES USER INPUT, WHICH MEANS THAT IT CANNOT BE MADE INTO A RECOVERY ZIP. DO NOT BOTHER TO ASK FOR ONE. IF YOU CAN'T LEARN HOW TO USE THE TERMINAL, THEN JUST STICK TO OTHER SUCKY APP2SD SOLUTIONS.
3 - THIS SCRIPT IMPLEMENTS INIT.D BY DEFAULT, IF YOU ALREADY HAVE INIT.D FUNCTIONALITY MAKE SURE TO CHANGE:
Code:
/system/bin/logwrapper busybox run-parts /system/etc/init.d
TO
Code:
# /system/bin/logwrapper busybox run-parts /system/etc/init.d
IN THE B]sysinit[/B] FILE.
4 - THIS SCRIPT IMPLEMENTS INIT.A, WHICH IS ESSENTIALLY LIKE INIT.D, BUT HAPPENS EXTREMELY EARLY AT BOOT TIME, IT IS SUGGESTED THAT REGULAR USERS DO NOT PUT ANY SCRIPTS IN INIT.A UNLESS THEY KNOW WHAT THEY'RE DOING, JUST USE INIT.D FOR OTHER SCRIPTS.
5 - UPDATE YOUR BUSYBOX TO THE LATEST VERSION (1.20.2 AT THE WRITING OF THIS). SOME EARLIER VERSIONS OF BUSYBOX ARE KNOWN TO NOT HAVE SOME OF THE REQUIRED SWITCHES FOR THE COMMANDS USED IN THE SCRIPT.
6 - AT THIS POINT THE SCRIPT REQUIRES THAT YOU HAVE A SECOND PARTITION IN YOUR MICROSD FORMATTED TO EXT4, ANYTHING ELSE WILL NOT WORK. THIS MAY CHANGE IN THE FUTURE, BUT AT THIS POINT IT'S A REQUIREMENT.
7 - FULLY READ THE INSTALLATION INSTRUCTIONS, MORE THAN ONCE IF POSSIBLE, BEFORE RUNNING THE SCRIPT. FAILING TO COMPREHEND WHAT'S GOING ON CAN POSSIBLY LEAVE YOUR DEVICE SEMI-BRICKED/CAUSE MAJOR HAVOC AND FORCE-CLOSES AND YOU'LL HAVE TO RESTORE A BACKUP. MORE THAN ANYTHING MAKE SURE TO BACKUP YOUR APPS.
INSTALLATION:
1 - Download the attached file on your device or PC.
2 - Extract the files and move it to an easy to access location in your device, such as /sdcard. Open USER_OPTIONS and ensure that all variables correctly apply to your device, LEAVE deletepostmove='false' until later. Set ENABLED='true' once you're reviewed everything.
3 - Open a terminal app (Rom Toolbox and such probably won't work because the script requires user input)
4 - Assuming that you moved all 6 files to /sdcard, execute the following commands in the terminal:
Code:
su
cd /sdcard
sh ./install-a2sd
You can also perform a clean install by using the command:
Code:
sh ./install-a2sd -clean
5 - The script will ask a couple of questions, answer them (ask someone for help if you're not sure).
6 - If all went well (The script will tell you that folders were created, files were copied and permissions were set) you'll be told that upon pressing enter your device will be rebooted. Press ENTER when ready or reboot manually if it fails to reboot on its own.
7 - STAGE 1 - NOTHING WILL HAVE NOTICIABLY CHANGED UPON THE FIRST REBOOT. This is normal. The first reboot will only garther many variables needed for the script to run properly, it will also give the opportunity to review the variables and ensure that everything is ok, so that you can disable the script in case the gathered variables are not correct, so that things don't get broken unecessarily. Please take a look at:
Code:
/sdcard/Tweaked.Scripts/A2SD/options/vars
If all looks good in there (even if you don't understand what the variables are for, ensure that the paths make sense, don't worry if you don't have /mnt/sd-ext and /mnt/temp, or /storage/sd-ext and /storage/temp as these will be created).
Reboot again after reviewing the variables.
8 - STAGE 2 - ONCE AGAIN, WHEN YOU REBOOT, NOTHING WILL APPEAR TO HAVE HAPPENED. In fact, this is not the case this time. If all variables were correct in STAGE 1, every app along with their data and files will have started to be copied over to the external storage as soon as the device finished booting. You should be able to see the process for this by opening the terminal and running the command:
Code:
logcat | busybox grep "01a2sd"
You can also run the following command in the terminal to ensure that there are extra mounts that did not exist prior:
Code:
mount
***THIS IS THE MOST IMPORTANT STEP IN THE PROCESS. MAKE SURE THAT YOU DO NOT REBOOT YOUR DEVICE UNTILL THE FOLLOWING FILE IS CREATED:
Code:
/sdcard/Tweaked.Scripts/A2SD/DEVICE_IS_READY
Failing to do so is the single worst mistake that you can do. Rebooting the device before the copying is done might cause all your apps to look like they're not installed, as well as major FCs, to the point where stuff is unusable and you have to restore a backup.
Just be patient during this step, specially if you already have a lot of apps installed, even more so if you have games that use a large amount of space.
9 - STAGE 3 - After rebooting from STAGE 2, the device will mount the external storage in every location where apps would reside in the internal storage. This is why it's extremely important that STAGE 2 is completed properly, because unless everything has been moved properly, files that were not copied will seem like they don't exist, possibly causing FCs and major havoc.
If everything went ok, it will actually look like nothing happened, but in fact, everything should be running from the external storage. You can confirm this by running the following command in the terminal:
Code:
mount
You should see three mounts that weren't there before that look like
Code:
/dev/block/mmcblk1p2 on /data/media/Android type ext4 (rw,nosuid,nodev,noatime,barrier=1,data=ordered)
/dev/block/mmcblk1p2 on /data/app type ext4 (rw,nosuid,nodev,noatime,barrier=1,data=ordered)
/dev/block/mmcblk1p2 on /data/data type ext4 (rw,nosuid,nodev,noatime,barrier=1,data=ordered)
At this point, it should be safe to open USER_OPTIONS in /sdcard/Tweaked.Scripts/A2SD/options and change deletepostmove='true'. Just remember that with this variable set on, all your apps will be wiped from external storage. This means that if you reboot without your MicroSD or if you lose the stuff in the MicroSD your alls will be gone. Becase of this, ensure that you have your apps backed up somewhere.
TweakerL said:
To install, download attached file (then rename it to 01a2sd) or copy code and save it to (01a2sd).
Copy the file to /system/etc/init.d (Can be done with any file manager that has root access)
Change permission to 755 (Can be done with most file managers with root access)
Change Options in script to your liking.
Enjoy the extra storage after reboot.
Code:
#! /system/bin/sh
########################################################################################################
########################################################################################################
## ##
## Super APP2SD by TweakerL ##
## Visit us at http://and-host.com ##
## Chat with us on freenot at #and-host ##
## ##
########################################################################################################
########################################################################################################
export PATH=/sbin:/system/sbin:/system/bin:/system/xbin
########################################################################################################
## Options #############################################################################################
## ##
## Feel free to change these: ##
## ##
## moveAndroid: Moves /sdcard/Android to external storage. ##
## moveApps: Not yet implemented ##
## moveData: Not yet implemented ##
## ##
## deletepostmove: If 'true ' Deletes files from internal storage after they have been moved. ##
## ##
## pruneoldlogs: If 'true' Deletes logs older than X hours set in prunehoursold. ##
## prunehoursold: If 'X' greater than 0 logs older than X hours will be deleted ##
## If 'X' equal 0 all logs will be deleted ##
## ##
## debugging: If 'true' files will be created in /sdcard for debugging purposes ##
## ##
moveAndroid='true' ##
##
deletepostmove='true' ##
##
pruneoldlogs='true' ##
prunehoursold='1' ##
##
debugging='false' ##
########################################################################################################
########################################################################################################
## Constants ###########################################################################################
## ##
## Don't touch these unless you're told to by someone who knows what they're doing: ##
## ##
append_android='/Android' ##
append_data='/data' ##
append_obb='/obb' ##
append_ext4='/ext4' ##
append_tweaked='/Tweaked.Scripts' ##
append_movethis='/movethis.txt' ##
append_temp='/temp' ##
append_media='/media' ##
append_A='A' ##
append_logs='/logs' ##
##
data='/data' ##
########################################################################################################
########################################################################################################
if [ -f /sbin/busybox -o -f /system/sbin/busybox -o -f /system/xbin/busybox -o -f /system/bin/busybox ]
then
has_busybox='true'
fi
if busybox blkid | busybox egrep -i "mmcblk1p2" > /dev/null
then
has_mmcblk1p2='true'
fi
if busybox blkid | busybox egrep -i "mmcblk1p2" | busybox awk '{print $4}' | busybox cut -f2 -d'"' > /dev/null
then
is_ext4='true'
fi
if [ $has_busybox == 'true' -a $has_mmcblk1p2 == 'true' -a $is_ext4 == 'true' ]
then
# DEBUGGING
# Get vars part 1
if [ $debugging == 'true' ]
then
set > /sdcard/vars.1
fi
# END DEBUGGING
# Start defining functions
makedir () {
if [ ! -d $1 ]
then
busybox mkdir -p $1
fi
busybox chmod $2 $1
busybox chown $3:$4 $1
}
# End defining functions
mnt_sd=$( busybox mount | busybox egrep -i '/sdcard' | busybox awk '{print $3}' )
mnt=$( busybox dirname $mnt_sd )
sd_uid=$( busybox ls -ln $mnt_sd | busybox egrep -i "Android" | busybox awk '{print $3}' )
sd_gid=$( busybox ls -ln $mnt_sd | busybox egrep -i "Android" | busybox awk '{print $4}' )
blk_ext4=$( busybox ls -lR /dev | busybox egrep -i "mmcblk1p2 ->" | busybox awk '{print $11}' )
blk_data=$( busybox mount | busybox egrep -m 1 '/data' | busybox awk '{print $1}' )
mnt_ext4=$mnt$append_ext4
ext_data=$mnt_ext4$data
ext_android=$ext_data$append_android
mnt_temp=$mnt_ext4$append_temp
temp_android=$mnt_temp$append_media$append_android
datetime=$( busybox date -Iseconds )
sd_android=$mnt_sd$append_android
sd_tweaked=$mnt_sd$append_tweaked
tweaked_logs=$sd_tweaked$append_logs
txt_movethis=$sd_tweaked$append_movethis
makedir $sd_tweaked 775 $sd_uid $sd_gid
data_media=$( busybox dirname $( busybox find /data -type d -follow -name 'Tweaked.Scripts' ) )
data_android=$data_media$append_android
data_uid=$( busybox ls -lnd $data | busybox awk '{print $3}' )
data_gid=$( busybox ls -lnd $data | busybox awk '{print $4}' )
android_uid=$( busybox ls -ln $data_media | busybox egrep -i "Android" | busybox awk '{print $3}' )
android_gid=$( busybox ls -ln $data_media | busybox egrep -i "Android" | busybox awk '{print $4}' )
# DEBUGGING
# Get vars part 2
if [ $debugging == 'true' ]
then
set > /sdcard/vars.2
busybox diff /sdcard/vars.1 /sdcard/vars.2 | busybox grep "+" | busybox egrep -v "@|_=" > /sdcard/vars.txt
fi
# END DEBUGGING
busybox chmod 775 $sd_tweaked
busybox chown $android_uid:$android_gid $sd_tweaked
makedir $tweaked_logs 775 $sd_uid $sd_gid
echo 'Logging Started' > $tweaked_logs/a2sd-$datetime.log
echo '' >> $tweaked_logs/a2sd-$datetime.log
busybox mount -o remount,rw /
makedir $mnt_ext4 775 $data_uid $data_gid
busybox mount $blk_ext4 $mnt_ext4
sleep 1
makedir $mnt_temp 775 $data_uid $data_gid
busybox mount $blk_data $mnt_temp
sleep 1
makedir $ext_data 775 $data_uid $data_gid
makedir $ext_android 775 $android_uid $android_gid
busybox mount -o bind $ext_android $data_android
sleep 3
busybox mount -o remount,ro /
if [ $moveAndroid == 'true' ]
then
busybox find $temp_android -type f -follow -print > $txt_movethis
fi
if [ $moveAndroid == 'true' ]
then
echo 'Copying files from internal storage to external storage\n' >> $tweaked_logs/a2sd-$datetime.log
while read line
do
source=$line
destappend=$append_A$( echo "$line" | busybox cut -f2-100 -d'A' )
dest=$ext_android/$destappend
destfolder=$( busybox dirname $dest )
if [ ! -f "$dest" ]
then
if [ ! -d "$destfolder" ]
then
busybox mkdir -p "$destfolder"
fi
busybox cp -pdf "$source" "$dest"
if [ -f "$dest" ]
then
echo -e $source'\ncopied to\n'$dest'\n' >> $tweaked_logs/a2sd-$datetime.log
else
echo -e 'Failed to copy: '$source'\n' >> $tweaked_logs/a2sd-$datetime.log
fi
else
echo -e 'Already exists: '$dest'\n' >> $tweaked_logs/a2sd-$datetime.log
fi
if [ $deletepostmove == 'true' ]
then
if [ -f "$dest" ]
then
busybox rm -f "$line"
if [ ! -f "$line" ]
then
echo -e 'deletepostmove = true - Deleted: '$source'\n' >> $tweaked_logs/a2sd-$datetime.log
echo -e '____________________________________________________________ ' >> $tweaked_logs/a2sd-$datetime.log
else
echo -e 'Failed to delete: '$source'\n' >> $tweaked_logs/a2sd-$datetime.log
echo -e '____________________________________________________________ ' >> $tweaked_logs/a2sd-$datetime.log
fi
fi
fi
done < $txt_movethis
busybox rm -f $txt_movethis
busybox chmod -R 775 $ext_android/*
busybox chown -R $android_uid:$android_gid $ext_android/*
fi
busybox umount $mnt_temp
if [ $pruneoldlogs == 'true' ]
then
(( prunehours = ($prunehoursold * 60) ))
find $tweaked_logs -mmin +$prunehours -exec rm {} \;
echo "All logs older than "$prunehoursold" hours old have been deleted"
fi
echo -e '\nEnd of Log' >> $tweaked_logs/a2sd-$datetime.log
fi
Click to expand...
Click to collapse
Where to find premission? Please advice.
Sent from my GT-N8000 using xda app-developers app
andylam16 said:
Where to find premission? Please advice.
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
use a root file browser then press and hold on the file, select permissions. Change to: Owner (rwx), group and other (rx)
Sent from my GT-N8013 using Tapatalk 2
My device doesn't have intI. D folder in system/Etc
I have to create new folder?
Rename the file without . Txt?
Sent from my GT-N8000 using Tapatalk 2
lm that guy said:
use a root file browser then press and hold on the file, select permissions. Change to: Owner (rwx), group and other (rx)
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
Thanks bro, is r = read , w = write , x = ???
Please advice.
Sent from my GT-N8000 using xda app-developers app
andylam16 said:
Thanks bro, is r = read , w = write , x = ???
Please advice.
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
Execute
Sent from my GT-N8013 using Tapatalk 2
lm that guy said:
Execute
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
Got it, thanks!:thumbup:
Sent from my GT-N8000 using xda app-developers app
kaipro said:
My device doesn't have intI. D folder in system/Etc
I have to create new folder?
Rename the file without . Txt?
Sent from my GT-N8000 using Tapatalk 2
Click to expand...
Click to collapse
+1
fauzin said:
+1
Click to expand...
Click to collapse
I suggest this thread: http://forum.xda-developers.com/showthread.php?t=1883125
Sent from my GT-N8013 using Tapatalk 2
kaipro said:
My device doesn't have intI. D folder in system/Etc
I have to create new folder?
Rename the file without . Txt?
Sent from my GT-N8000 using Tapatalk 2
Click to expand...
Click to collapse
Check link in my sig for my other thread where you can get the init.d enabler.
After did the procedure as mentioned nothing happened the apps still go to the scared not the external. Please advice anything I missed. Thanks
Sent from my GT-N8000 using xda app-developers app
---------- Post added at 10:54 AM ---------- Previous post was at 10:12 AM ----------
One more thing there is a file "99testinit" inside the init.d , do I need to anything about it?
Sent from my GT-N8000 using xda app-developers app
andylam16 said:
After did the procedure as mentioned nothing happened the apps still go to the scared not the external. Please advice anything I missed. Thanks
Sent from my GT-N8000 using xda app-developers app
---------- Post added at 10:54 AM ---------- Previous post was at 10:12 AM ----------
One more thing there is a file "99testinit" inside the init.d , do I need to anything about it?
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
Exactly same as me.
Sent from my GT-N8000 using Tapatalk 2
If you guys read everything, this is still an early version. At the moment, only /sdcard/Android is getting moved, which is the location that stores extra files downloaded by apps, not the apps themselves. If the script is running, you can go on terminal and type:
Code:
df -h
and you should see mmcblk1p2 (which is the ext4 partition in the MicroSD) and how much space is being used, which is the amount of space that should be getting saved from the internal storage. Also, if you look under storage under settings, the amount of space available should have increased considerably, specially if you have a lot of games.
I'll be working on the other two parts throughout this week (moving APK and DATA) Then you will be able to notice a bigger difference, although it will always look like apps are installed in the internal storage, even when they're in the external storage.
The reason for this is because the script works by mounting the external storage to:
/data/app (not yet implemented)
/data/data (not yet implemented)
/data/media/Android (already implemented)
while at the same time copying the contents of those locations from internal to external then wiping them from internal. Essentially when it's all said and done, the OS pretty much thinks that nothing has changed, except that whenever anything gets written to those folders it takes space from the external storage instead of internal.
A good way to test it would be to download a free gameloft game like MIB3 or Six Guns. Take a look at storage before installing. After you install MIB3, your available storage should drop by roughly 500MB, but if you're using the script, even at preview stage, the available storage will only drop by about 30MB, even though storage settings will say that the game takes up ~500MB.
Also, you can mount your normal data partition and take a look at how much space is being used there, as opposed to the external partition like this:
(All the following commands in terminal)
make sure which partition is mounted to /data
# mount
mount data to temp location (assuming data is mmcblk0p12)
# mount /dev/block/mmcblk0p12 /mnt/ext4/temp
check amount of space used in internal storage:
# du -dh /mnt/ext4/temp/media/Android
check amount of space used in external storage
# du -dh /mnt/ext4/data/Android
In the future I'll add to the script a way to automatically calculate the amount of space saved
The script itself is not working. Init.d is working, did rename the file and changed permission. I use script manger and try to run the script but it's got error,
Sent from my GT-N8000 using xda app-developers app
htainlin said:
The script itself is not working. Init.d is working, did rename the file and changed permission. I use script manger and try to run the script but it's got error,
Sent from my GT-N8000 using xda app-developers app
Click to expand...
Click to collapse
I'm gonna be uploading a new version soon with more debugging so I can see why people might have issues.
EDIT - Done updating OP
Is there any recommendations for the partition other than ext4, like swap size and what not? I also assume a reboot is required in order to get it to run right? I am still getting insufficient storage available when updating apps in the play store. I was getting that error before, even though I have plenty of space, like more than 10 gb on the internal memory so I don't know if it is just a batch update issue on the play store with my note for whatever reason. But even individual updates stop with an insufficient storage error.
I have tried using both the attached file in the op as well as the copy and paste method. The file should have no extension once in place right?
It seems as though it is still not working right
I have init.d working, confirmed with the test file and your method, Busybox installed, partitions with 0 swap and 1024 size at ext4
I have not been able to locate a log created, where is it dumped to to see if it is even running the script?
EDIT: never-mind, I figured out why my stuff was't updating but still able to add new apps, in rom tool box, I set it to install to sd card after most of my apps were already put on the internal memory. Just switched it to auto and it fixed it up
smaw51 said:
Is there any recommendations for the partition other than ext4, like swap size and what not? I also assume a reboot is required in order to get it to run right? I am still getting insufficient storage available when updating apps in the play store. I was getting that error before, even though I have plenty of space, like more than 10 gb on the internal memory so I don't know if it is just a batch update issue on the play store with my note for whatever reason. But even individual updates stop with an insufficient storage error.
I have tried using both the attached file in the op as well as the copy and paste method. The file should have no extension once in place right?
It seems as though it is still not working right
I have init.d working, confirmed with the test file and your method, Busybox installed, partitions with 0 swap and 1024 size at ext4
I have not been able to locate a log created, where is it dumped to to see if it is even running the script?
EDIT: never-mind, I figured out why my stuff was't updating but still able to add new apps, in rom tool box, I set it to install to sd card after most of my apps were already put on the internal memory. Just switched it to auto and it fixed it up
Click to expand...
Click to collapse
Had a similar problem when i had the tf201, kept getting an error whenever playstore started installing an app after the initial download, and i had the same problem a couple of days ago with the note which i resolved by deleting all odex files in the data\apps folder, i used es file explorer, navigated to the app folder and did a search for 'odex', then deleted them, i can now install apps again
Dont know if this is the same issue as yours , and ive just now seen your edit, so i see youve resolved it, so no worries, hopefully our solutions will help out others
Edit: dont quote me but my particular issue i 'think' has something to do with titanium backup, so for those having 'inssuficient storage errorr' in the playstore AND you have titanium backup, this may help
It might be a restore from backup in general issue, after you mention you used titanium. I used my backup pro to restore apps and data from my tf 700 to the my note. Only halfsies worked but maybe that caused some issues.
This is going to be very nice one apk and data are enabled to move to sd
how do I know that I have ext4 in my SDcard? and if I dont have it , How do I make ext4 ?
Thanks
Hi All,
I am a happy user of Xposed Installer and using Modules.
However, one day my friend asked me if I could help him to fix the logging problems of Xposed because it almost ate like ~500MB of his internal space without him knowing it. So, I made this simple script to make a temporary fix (although I can still make this a little more flexible by checking the log file instead of running it on a fixed interval). I hope this helps and I hope Xposed dev can make an option to cleanup the logs generated by the modules.
More power
The script - I found that (not really proven, but as observed) looping scripts in the init.d are not very well handled so I did a workaround. I have the main script (cleaner) inside data and one script (trigger) in init.d. So here are they:
The main script - I placed on /data/Tweaks/scripts:
Code:
#!/system/bin/sh
# Name: 50_XposedCleanLog
# Date: 10/27/2014
# Author: Arsie Organo Jr. - [email protected]
# Link:
# About: This will clean up Xposed Installer app generated
# logs every X minutes.
# 1. Rooted
# 2. Busybox is installed.
####################################################
# Interval between 50_XposedCleanLog runs, in seconds, 18000=.5hour
XPOSEDLOGS=/data/data/de.robv.android.xposed.installer/log/error.log
a=0
sleepme=18000
while [ $a -ge 0 ]
do
busybox rm -f $XPOSEDLOGS
busybox touch $XPOSEDLOGS
chown root:root $XPOSEDLOGS
echo "Xposed Logs Cleanup Started $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $XPOSEDLOGS;
echo "Cleanup will run again in the next $(expr $sleepme / 60) min" | tee -a $XPOSEDLOGS;
echo $a
a=`expr $a + 1`
echo "Xposed Logs cleaner completed at $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $XPOSEDLOGS;
sleep $sleepme
done
# END
And the trigger is placed in /system/etc/init.d - 10_DONOTDELETE:
Code:
#!/system/bin/sh
# Name: 10_DONOTDELETE
# Date: 10/28/2014
# Author: Arsie Organo Jr. - [email protected]
# Link:
# About: This script is needed to run all the tweaks
# and looping scripts.
# You will need your device to be:
# 1. Rooted
# 2. Busybox is installed.
####################################################
datalog=/data/Tweaks/logs/10_DONOTDELETE.log
busybox rm -f $datalog
busybox touch $datalog
# Xposed logs cleaner
/system/bin/sh /data/Tweaks/scripts/50_XposedCleanLog.sh > /dev/null 2>&1 &
if [ `busybox ps -ef | grep Tweaks | grep 50_XposedCleanLog.sh | wc -l` -eq 1 ] ;
then
echo "$( date +"%m-%d-%Y %H:%M:%S" ) Xposed logs cleaner initiated" | tee -a $datalog;
else
echo "$( date +"%m-%d-%Y %H:%M:%S" ) Xposed logs cleaner initialization FAILED" | tee -a $datalog;
fi;
So this simply means that the main script will be called upon restart and then loop it in the background checking the log file every 30min.
Note: Phone needs to be rooted and must have busybox installed. Tested on MediaTek MT6582 (MP Agua Rio) JB version.
I have attached a flashable here.. direct flash only and there is no need to wipe your cache.
This will work ONLY if your phone supports init.d and the generated Xposed log file is located here - /data/data/de.robv.android.xposed.installer/log/error.log
Wow very nice keep it up sir. :good:
Rovo89 set limit for log file to 5 MB. https://github.com/rovo89/XposedBridge/commit/afcc3e1e788ea44bfd00245a24b5dfe6c86aa3d0
Cool!
pyler said:
Rovo89 set limit for log file to 5 MB. https://github.com/rovo89/XposedBridge/commit/afcc3e1e788ea44bfd00245a24b5dfe6c86aa3d0
Click to expand...
Click to collapse
That's cool, however using the latest Xposed (experimental version) we've seen the error.log can go more than 500mb.
You can check the ridiculous size of the error.log below. So to aid this, I made this looping script.
eyesfortech said:
That's cool, however using the latest Xposed (experimental version) we've seen the error.log can go more than 500mb.
You can check the ridiculous size of the error.log below. So to aid this, I made this looping script.
Click to expand...
Click to collapse
Yes, this change is not part of 2.7 exp1.
too bad but there is always hope
pyler said:
Yes, this change is not part of 2.7 exp1.
Click to expand...
Click to collapse
yeah... I guess so, but there's always hope
huge issue
I check and mine is 7gb but when I check application manager it says xposed is using 11gb why?
manual Clear logs
bigchuk00 said:
I check and mine is 7gb but when I check application manager it says xposed is using 11gb why?
Click to expand...
Click to collapse
Hi,
have you tried manually clearing the logs from Xposed Logs options?
No. I didn't. The flash able zip was what I used n it worked fine . thank you.
Cool! I guess the permanent solution will be provided in the next update of Xposed (hopefully!)
It's just absurd that these 'error logs' rack up over a 100mb per day. The Xposed chappies say look at the log to see what module is causing the problem - well, I can't make head nor tail of the logs. Should be a better way of dealing with it.
eyesfortech said:
Cool! I guess the permanent solution will be provided in the next update of Xposed (hopefully!)
Click to expand...
Click to collapse
I admire your genius in setting up cron & it works flawlessly on my device, please would be able to create a flashable script or cron that will make @zeppelinrox sclean(wipe dalvik & reboot) script to run once each week?
slimcyril said:
I admire your genius in setting up cron & it works flawlessly on my device, please would be able to create a flashable script or cron that will make @zeppelinrox sclean(wipe dalvik & reboot) script to run once each week?
Click to expand...
Click to collapse
Unfortunately I am currently swamped with my day job and I cannot promise anything sooner. Can you give me the link the one you wanted me to try? And on what device? Currently I am no longer using MTK so testing it will also be a problem.
Thanks.
eyesfortech said:
Unfortunately I am currently swamped with my day job and I cannot promise anything sooner. Can you give me the link the one you wanted me to try? And on what device? Currently I am no longer using MTK so testing it will also be a problem.
Thanks.
Click to expand...
Click to collapse
Thanks for your response I later found what I was looking here http://forum.xda-developers.com/showthread.php?t=2700146
►Tweak Klean & Speed◄
manual install
2016, january 24th
Hi, after reading many forums and using the various resource I created a script to optimize all LG L Fino.
Before install check your phone is ROOT HERE.
Drag & Drop, and put a permission.
- Adaware (10 057 ko lite)
etc/ host > 644
- Activated init.d
etc/ install-recovery-2.sh > 755
- Tweaks
etc/ init.d/ *755
_00kleanup > full cleaning at launch - (as usefulness)
_01kernel_panic > disabled kernel panic
_02seeder > optimization
_03vm > tweak vm
_04ksm > configuring KSM
_05zram > activated Zram 256 mo
_06_IO_scheduler > best I/O scheduler line
_07lowmemorykiller > configuring lowmemorykiller
_08remount > remounted
_09zipalign > optimization application
_10sqlite3 > optimization database
_11fstrim > lag trim fix
_12networks > secure and optimize
_13wifi_sleeper > idle wait
_14kill_all > kill all process
- Mod better screen (perf)
lib/ egl/ egl.cfg
1 1 android
0 1 adreno
Click to expand...
Click to collapse
- Associated file
xbin/ 777
sqlite3
zipalign
- Disable MPDecision and use full multicore rename /bin/mpdecision to mpdecision-rm
- Mod your BUILD.PROP
Code:
[B]Modded Sound Tweak[/B]
# Fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.mode=endfire
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
persist.audio.hp=true
persist.audio.handset.mic=digital
persist.audio.voicecall.mic=0
persist.audio.voice.clarity=none
[B]Added[/B]
# Best Scrolling
persist.sys.scrollingcache=3
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
windowsmgr.max_events_per_sec=90
# Disable Checking Data
logcat.live=disable
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Photo & Flashlight Quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.flashIntensity=70
ro.media.capture.torchIntensity=65
- Bootanimation GooGle : link here replace original file.
media / ..644
- Guide :
Delete manualy all Google files to app/*
- without : GoogleCalendarSyncAdapter.apk, GoogleContactSyncAdapter.apk
Delete manualy all Google files to priv-app/*
- without : GmsCore.apk, GoogleBackupTransport.apk, GoogleLoginService.apk, GoogleServicesFramework.apk, Phonesky.apk
Disable all LG services to system/application : xx xx
Enjoy Your ROM is Kustom...
____________________________________
Apps for escort
Root Browser - Sd Maid - Link2Sd (for export but don't extand)
Thank's many dev for the script.
Thanks for that tweak. Do you have experience in building custom roms ? Would be very thankful if u could build one for our device
Hi proudlytm
I'm just sharing work that help, the scripts come from the community work provided on xda. I changed a little, but I have more time to work the Rom. If I find some time I would write a script to flash via recovery.
Did you install, and what do you think the result?
mickael.webmaster said:
Hi proudlytm
I'm just sharing work that help, the scripts come from the community work provided on xda. I changed a little, but I have more time to work the Rom. If I find some time I would write a script to flash via recovery.
Did you install, and what do you think the result?
update 02/12/2015
Before use new script, erase all script.
Click to expand...
Click to collapse
Haven't installed it yet, I might, but my question was if you could make / port CyanogenMod 11 or CyanogenMod 12.1 for our LG L Fino D290N/D295 ?
proudlytm said:
Haven't installed it yet, I might, but my question was if you could make / port CyanogenMod 11 or CyanogenMod 12.1 for our LG L Fino D290N/D295 ?
Click to expand...
Click to collapse
Sorry my function is limited , I think I can without certainty but unfortunately I don't have time. If you test, report me. Thx.
Latest update :
networks tweak and all correctly.
- added bootanimation "GooGle"
Tested on game "Rayman Jungle Run" and "Berry Rush", crazy work.
mickael.webmaster said:
►Tweak Klean & Speed◄
2015, december 19th
Hi, after reading many forums and using the various resource I created a script to only optimize LG L Fino.
Before install check your phone is ROOT and BUSYBOX either install, use to root browser for :
Drag & Drop, and put a permission.
- Adaware (46 342 ko use only for 1go+ ram)
etc/ host 644
- Activated init.d
etc/ install-recovery-2.sh 755
- Tweaks
etc/ init.d/ ..755
_01kleanup > full cleaning at launch
_02kernel_panic > disabled kernel panic
_03ksm > configuring KSM
_04lowmemorykiller > configuring lowmemorykiller
_05_IO_scheduler > best I/O scheduler line
_06remount > remounted
_07vm > tweak vm
_08zram > activated Zram 256 mo
_09fstrim > lag trim fix
_10zipalign > optimization application
_11sqlite3 > optimization database
_12wifi_sleeper > idle wait
_13networks > secure and optimize
_14kill_all > kill all process
_15seeder > optimization
- force GPU
lib/ egl/ ..644
egl.cfg
libGLES_android.so > rename to libGLES_android.bak
- Associated file
xbin/ 777
sqlite3
zipalign
Disable MPDecision and use full multicore rename /bin/mpdecision to mpdecision-rm
Mod your BUILD.PROP
Code:
[B]Modded[/B]
[I]# Fluencetype can be "fluence" or "fluencepro" or "none"[/I]
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.mode=endfire
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
persist.audio.hp=true
persist.audio.handset.mic=digital
persist.audio.voicecall.mic=0
persist.audio.voice.clarity=none
[B]Deleted[/B]
[I]# Reduce Background apps limit[/I]
##"ro.sys.fw.bg_apps_limit=20
[B]Added[/B]
# App Home
ro.HOME_APP_ADJ=1
# App Optimization (low reboot)
ro.app.optimization=true
# Best Scrolling
persist.sys.scrollingcache 3
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
windowsmgr.max_events_per_sec=90
# Disable Checking Data
logcat.live=disable
persist.adb.notify=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Enable JIT
dalvik.vm.jit.codecachesize=1
# Enable Bytecode
dalvik.vm.verify-bytecode=true
dalvik.vm.dexopt-flags=v=f,u=n,o=v
# Enable Hardware Acceleration
ro.config.disable_hw_accel=false
# Enable OpenGL
ro.opengl.off=0
# Enable Surface Dithering (blur effect)
persist.sys.use_dithering=2
# Enable 4x_MSAA
MSAASmoothing=High
MSAABufferAllocation=always
forceMSAAMode=1
MSAAMode=2
# Game tweaks
# unlock fps
persist.tegra.NV_FPSLIMIT=0
#
#
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# More RAM
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
# Photo & Flashlight Quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.flashIntensity=70
ro.media.capture.torchIntensity=65
# Quality Of Media Streaming
media.stagefright.enable-meta=true
media.stagefright.enable-rtsp=true
# Storage USB
ro.usbstorage.cpumode=performance
bootanimation GooGle : link here replace original file.
media / ..644
____________________________________
Apps for escort
Root Browser - Sd Maid - Link2Sd (for export but don't extand)
Thank's many dev for the script.
Click to expand...
Click to collapse
Doesn't work bro... soft bricks phone
and It's just the build.prop i changed
After installing this tweak and reboot my phone opens only recovery mode.
Sor92 said:
After installing this tweak and reboot my phone opens only recovery mode.
Click to expand...
Click to collapse
This tweak can't brick your smartphone, it's a customization of kernel event. It's practiced on rom stock D290n root + busybox tool installed, by manualy install.
After installation, check /data. If the log are there so the script works, otherwise check the file permission with root browser.
Sorry, report your model, I use d290n.
Run or not > don't brick :fingers-crossed:
Edit :
(don't move lib/egl, script unstable)
I have D290n with root and busybox.
mickael.webmaster said:
This tweak can't brick your smartphone, it's a customization of kernel event. It's practiced on rom stock D290n root + busybox tool installed, by manualy install.
After installation, check /data. If the log are there so the script works, otherwise check the file permission with root browser.
Sorry, report your model, I use d290n.
Run or not > don't brick :fingers-crossed:
Edit :
(don't move lib/egl, script unstable)
Click to expand...
Click to collapse
D295n
Which permissions should we set in the root browser?
Ky$h said:
D295n
Click to expand...
Click to collapse
D295 ?? Flash a stock rom or hard reset, build.prop it's not appropriate, it's the cause of bootloop.
http://lg-phone-firmware.com/firmware-LG+L+Fino-Tutti-103.html
Sorry guys, I correct the position.
________________________
RenegadeX44 said:
Which permissions should we set in the root browser?
Click to expand...
Click to collapse
With root browser
________________________
Update tweak : 2016, january 24th
_03lowmemorykiller > configuring lowmemorykiller
_04_IO_scheduler > best I/O scheduler line
________________________
Update tweak : 2016, january 26th
_Order tweak
_06_IO_scheduler > best I/O scheduler line - added LOOP
...
Thread update in the near future